macos/macos-install

#  Licensed to the Apache Software Foundation (ASF) under one
#  or more contributor license agreements.  See the NOTICE file
#  distributed with this work for additional information
#  regarding copyright ownership.  The ASF licenses this file
#  to you under the Apache License, Version 2.0 (the
#  "License"); you may not use this file except in compliance
#  with the License.  You may obtain a copy of the License at
#  
#    http://www.apache.org/licenses/LICENSE-2.0
#    
#  Unless required by applicable law or agreed to in writing,
#  software distributed under the License is distributed on an
#  "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
#  KIND, either express or implied.  See the License for the
#  specific language governing permissions and limitations
#  under the License.

# Install a complete distribution, the required system tools and libraries, the
# runtime dependencies and the Tuscany SCA runtime on a fresh MacOS 10.6.7
# system.

# Display commands as they are executed
set -x

# Build and install in the current directory
build=`pwd`
build=$build/build
rm -rf $build
mkdir $build
cd $build

# Install pkg-config
curl -OL http://pkgconfig.freedesktop.org/releases/pkg-config-0.25.tar.gz
tar xzf pkg-config-0.25.tar.gz
cd pkg-config-0.25
./configure --prefix=$build/pkg-config-0.25-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Libexpat
curl -OL http://sourceforge.net/projects/expat/files/expat/2.0.1/expat-2.0.1.tar.gz/download
mv download expat-2.0.1.tar.gz
tar xzf expat-2.0.1.tar.gz
cd expat-2.0.1
./configure --prefix=$build/expat-2.0.1-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Libprce
curl -OL http://downloads.sourceforge.net/project/pcre/pcre/8.12/pcre-8.12.zip
unzip pcre-8.12.zip
cd pcre-8.12
./configure --prefix=$build/pcre-8.12-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Apache APR and HTTP server
svn co -r 1051230 http://svn.apache.org/repos/asf/apr/apr/trunk apr-1.4.x
cd apr-1.4.x
./buildconf
./configure -with-openssl --with-crypto --with-expat=$build/expat-2.0.1-bin --prefix=$build/apr-1.4.x-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build
curl -OL http://archive.apache.org/dist/httpd/httpd-2.3.10-alpha.tar.gz
tar xzf httpd-2.3.10-alpha.tar.gz
cd httpd-2.3.10
./configure --enable-ssl --enable-proxy --enable-usertrack --enable-cgi --enable-session-crypto --enable-mods-shared=most --enable-mpms-shared="prefork worker event" --with-mpm=prefork --with-apr=$build/apr-1.4.x-bin --with-expat=$build/expat-2.0.1-bin --with-pcre=$build/pcre-8.12-bin --prefix=$build/httpd-2.3.10-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build libevent
curl -OL http://www.monkey.org/~provos/libevent-2.0.13-stable.tar.gz
tar xzf libevent-2.0.13-stable.tar.gz
cd libevent-2.0.13-stable
./configure --prefix=$build/libevent-2.0.13-stable-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Memcached
curl -OL http://memcached.googlecode.com/files/memcached-1.4.7.tar.gz
tar xzf memcached-1.4.7.tar.gz
cd memcached-1.4.7
# http://code.google.com/p/memcached/issues/detail?id=218
patch -p0<$build/../memcached-1.4.7.patch
autoreconf --install
./configure --with-libevent=$build/libevent-2.0.13-stable-bin --prefix=$build/memcached-1.4.7-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Tinycdb
git clone git://github.com/jsdelfino/tinycdb.git
cd tinycdb
make all shared
make prefix=$build/tinycdb-bin install-all install-sharedlib
install_name_tool -id $build/tinycdb-bin/lib/libcdb.so.1 $build/tinycdb-bin/lib/libcdb.so.1
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build LevelDB
git clone https://code.google.com/p/leveldb/
cd leveldb
make all 
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build


# Build Libcurl
curl -OL http://curl.haxx.se/download/curl-7.19.5.tar.gz
tar xzf curl-7.19.5.tar.gz
cd curl-7.19.5
./configure --prefix=$build/curl-7.19.5-bin --without-libidn
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Libxml2
curl -OL ftp://xmlsoft.org/libxml2/libxml2-sources-2.7.7.tar.gz
tar xzf libxml2-sources-2.7.7.tar.gz
cd libxml2-2.7.7
./configure --prefix=$build/libxml2-2.7.7-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Mozilla Portable Runtime
curl -OL http://ftp.mozilla.org/pub/mozilla.org/nspr/releases/v4.8.8/src/nspr-4.8.8.tar.gz
tar xzf nspr-4.8.8.tar.gz
cd nspr-4.8.8/mozilla/nsprpub
./configure --prefix=$build/nspr-4.8.8-bin --enable-64bit
make
make install
install_name_tool -id $build/nspr-4.8.8-bin/lib/libnspr4.dylib $build/nspr-4.8.8-bin/lib/libnspr4.dylib
install_name_tool -id $build/nspr-4.8.8-bin/lib/libplc4.dylib $build/nspr-4.8.8-bin/lib/libplc4.dylib
install_name_tool -id $build/nspr-4.8.8-bin/lib/libplds4.dylib $build/nspr-4.8.8-bin/lib/libplds4.dylib
install_name_tool -change @executable_path/libnspr4.dylib $build/nspr-4.8.8-bin/lib/libnspr4.dylib $build/nspr-4.8.8-bin/lib/libplc4.dylib
install_name_tool -change @executable_path/libnspr4.dylib $build/nspr-4.8.8-bin/lib/libnspr4.dylib $build/nspr-4.8.8-bin/lib/libplds4.dylib
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build SpiderMonkey
curl -OL http://ftp.mozilla.org/pub/mozilla.org/js/js185-1.0.0.tar.gz 
tar xzf js185-1.0.0.tar.gz
cd js-1.8.5/js/src
./configure --prefix=$build/js-1.8.5-bin --enable-threadsafe --with-system-nspr --with-nspr-prefix=$build/nspr-4.8.8-bin
make
make install
ln -s $build/js-1.8.5-bin/lib/libmozjs185.dylib $build/js-1.8.5-bin/lib/libmozjs.dylib
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Libstrophe
git clone git://github.com/jsdelfino/libstrophe.git
cd libstrophe
export ACLOCALFLAGS="-I $build/pkg-config-0.25-bin/share/aclocal"
./bootstrap.sh
unset ACLOCALFLAGS
./configure --prefix=$build/libstrophe-bin --with-expat=$build/expat-2.0.1-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build HTML Tidy
cvs -z3 -d:pserver:anonymous@tidy.cvs.sourceforge.net:/cvsroot/tidy co -P tidy
cd tidy
sh build/gnuauto/setup.sh
./configure --prefix=$build/htmltidy-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Libopkele
git clone git://github.com/jsdelfino/libopkele.git
cd libopkele
mkdir aclocal.d
cp $build/pkg-config-0.25-bin/share/aclocal/pkg.m4 aclocal.d
./autogen.bash
./configure --prefix=$build/libopkele-bin OPENSSL_CFLAGS=-I/usr/include OPENSSL_LIBS=-lssl --with-curl=$build/curl-7.19.5-bin --with-expat=$build/expat-2.0.1-bin --with-htmltidy=$build/htmltidy-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Mod_auth_openid
git clone git://github.com/jsdelfino/mod_auth_openid.git
cd mod_auth_openid
./autogen.sh
./configure --prefix=$build/mod-auth-openid-bin CXXFLAGS="-I$build/pcre-8.12-bin/include" --with-apr=$build/apr-1.4.x-bin --with-httpd=$build/httpd-2.3.10-bin --with-curl=$build/curl-7.19.5-bin --with-pcre=$build/pcre-8.12-bin --with-libopkele=$build/libopkele-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Liboauth
curl -OL http://liboauth.sourceforge.net/pool/liboauth-0.9.1.tar.gz
tar xzf liboauth-0.9.1.tar.gz
cd liboauth-0.9.1
./configure PKG_CONFIG="$build/pkg-config-0.25-bin/bin/pkg-config" --prefix=$build/liboauth-0.9.1-bin CURL_CFLAGS="-I$build/curl-7.19.5-bin/include" CURL_LIBS="-L$build/curl-7.19.5-bin/lib -R$build/curl-7.19.5-bin/lib -lcurl"
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build mod_security
curl -L http://sourceforge.net/projects/mod-security/files/modsecurity-apache/2.6.1/modsecurity-apache_2.6.1.tar.gz/download -o modsecurity-apache_2.6.1.tar.gz
tar xzf modsecurity-apache_2.6.1.tar.gz
cd modsecurity-apache_2.6.1
./configure --prefix=$build/modsecurity-apache-2.6.1-bin --with-apxs=$build/httpd-2.3.10-bin/bin/apxs --with-apr=$build/apr-1.4.x-bin/bin/apr-2-config --with-apu=$build/apr-1.4.x-bin/bin/apr-2-config --with-libxml=$build/libxml2-2.7.7-bin --with-curl=$build/curl-7.19.5-bin --with-pcre=$build/pcre-8.12-bin LIBS="-L$build/expat-2.0.1-bin/lib -R$build/expat-2.0.1-bin/lib" CFLAGS="-I$build/pcre-8.12-bin/include"
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build
curl -L http://sourceforge.net/projects/mod-security/files/modsecurity-crs/0-CURRENT/modsecurity-crs_2.2.1.tar.gz/download -o modsecurity-crs_2.2.1.tar.gz 
tar xzf modsecurity-crs_2.2.1.tar.gz
cp -R $build/modsecurity-crs_2.2.1/base_rules $build/modsecurity-apache-2.6.1-bin
cp -R $build/modsecurity-crs_2.2.1/optional_rules $build/modsecurity-apache-2.6.1-bin
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Apache Libcloud
curl -OL http://archive.apache.org/dist/incubator/libcloud/apache-libcloud-incubating-0.4.2.tar.bz2
tar xjf apache-libcloud-incubating-0.4.2.tar.bz2
cd apache-libcloud-incubating-0.4.2
python setup.py build
python setup.py install --home $build/libcloud-0.4.2-bin
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Apache Nuvem
git clone git://git.apache.org/nuvem.git
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Tuscany SCA
git clone git://git.apache.org/tuscany-sca-cpp.git
cd tuscany-sca-cpp
./bootstrap
./configure --prefix=$build/tuscany-sca-cpp-bin --with-curl=$build/curl-7.19.5-bin --with-apr=$build/apr-1.4.x-bin --with-httpd=$build/httpd-2.3.10-bin --with-memcached=$build/memcached-1.4.7-bin --with-tinycdb=$build/tinycdb-bin --with-leveldb=$build/leveldb --with-js-include=$build/js-1.8.5-bin/include/js --with-js-lib=$build/js-1.8.5-bin/lib --with-libcloud=$build/libcloud-0.4.2-bin --enable-threads --enable-python --enable-opencl --with-libxml2=$build/libxml2-2.7.7-bin --enable-chat --with-libstrophe=$build/libstrophe-bin --enable-openid --with-mod-auth-openid=$build/mod-auth-openid-bin --enable-oauth --with-liboauth=$build/liboauth-0.9.1-bin --enable-mod-security --with-mod-security=$build/modsecurity-apache-2.6.1-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Create src archive
tar czf tuscany-sca-cpp-1.0-src.tar.gz apache-libcloud-incubating-0.4.2 apache-libcloud-incubating-0.4.2.tar.bz2 apr-1.4.x apr-1.4.x-bin autoconf-2.13 autoconf-2.13-bin autoconf-2.13.tar.gz curl-7.19.5 curl-7.19.5-bin curl-7.19.5.tar.gz expat-2.0.1 expat-2.0.1-bin expat-2.0.1.tar.gz htmltidy-bin httpd-2.3.10 httpd-2.3.10-alpha.tar.gz httpd-2.3.10-bin js-1.8.5-bin js-1.8.5 js185-1.0.0.tar.gz libcloud-0.4.2-bin libevent-2.0.13-stable libevent-2.0.13-stable-bin libevent-2.0.13-stable.tar.gz liboauth-0.9.1 liboauth-0.9.1-bin liboauth-0.9.1.tar.gz libopkele libopkele-bin libstrophe libstrophe-bin libxml2-2.7.7 libxml2-2.7.7-bin libxml2-sources-2.7.7.tar.gz memcached-1.4.7 memcached-1.4.7-bin memcached-1.4.7.tar.gz mod_auth_openid mod-auth-openid-bin modsecurity-apache_2.6.1 modsecurity-apache-2.6.0-bin modsecurity-apache_2.6.0.tar.gz modsecurity-crs_2.2.1 modsecurity-crs_2.2.1.tar.gz nspr-4.8.8-bin nspr-4.8.8 nspr-4.8.8.tar.gz nuvem pcre-8.12 pcre-8.12-bin pcre-8.12.zip pkg-config-0.25 pkg-config-0.25-bin pkg-config-0.25.tar.gz tidy tinycdb tinycdb-bin leveldb tuscany-sca-cpp tuscany-sca-cpp-bin

# Create bin archive
tar czf tuscany-sca-cpp-1.0.tar.gz apr-1.4.x-bin curl-7.19.5-bin expat-2.0.1-bin htmltidy-bin httpd-2.3.10-bin js-1.8.5-bin libcloud-0.4.2-bin libevent-2.0.13-stable-bin liboauth-0.9.1-bin libopkele-bin libstrophe-bin libxml2-2.7.7-bin memcached-1.4.7-bin mod-auth-openid-bin modsecurity-apache-2.6.1-bin nspr-4.8.8-bin nuvem/nuvem-parallel pcre-8.12-bin tinycdb-bin leveldb tuscany-sca-cpp tuscany-sca-cpp-bin