| #* |
| # Licensed to the Apache Software Foundation (ASF) under one |
| # or more contributor license agreements. See the NOTICE file |
| # distributed with this work for additional information |
| # regarding copyright ownership. The ASF licenses this file |
| # to you under the Apache License, Version 2.0 (the |
| # "License"); you may not use this file except in compliance |
| # with the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, |
| # software distributed under the License is distributed on an |
| # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| # KIND, either express or implied. See the License for the |
| # specific language governing permissions and limitations |
| # under the License. |
| *# |
| # ------------------------------------------------------------------- |
| # |
| # This is the configuration file for Turbine. |
| # |
| # Note that strings containing "," (comma) characters must backslash |
| # escape the comma (i.e. '\,') |
| # |
| # ------------------------------------------------------------------- |
| |
| # ------------------------------------------------------------------- |
| # |
| # L O G 4 J 2 - L O G G I N G |
| # |
| # log4j2 may loads automatically if found on classpath, cf. https://logging.apache.org/log4j/2.x |
| # |
| # ------------------------------------------------------------------- |
| log4j2.file = log4j2.xml |
| |
| # ------------------------------------------------------------------- |
| # |
| # P I P E L I N E |
| # |
| # ------------------------------------------------------------------- |
| pipeline.default.descriptor = WEB-INF/conf/turbine-classic-pipeline.xml |
| |
| # ------------------------------------------------------------------- |
| # |
| # M A I L S E R V E R |
| # |
| # ------------------------------------------------------------------- |
| # Your mail server for outgoing email. |
| # |
| # Default: null |
| # ------------------------------------------------------------------- |
| |
| mail.server= |
| |
| # ------------------------------------------------------------------- |
| # SMTP-From header for your outgoing messages |
| # |
| # All failed delivery messages will be returned to this address. |
| # If unset, these messages will be sent to the address in the |
| # From header (standard behaviour) |
| # |
| # Default: null |
| # ------------------------------------------------------------------- |
| |
| mail.smtp.from= |
| |
| # ------------------------------------------------------------------- |
| # |
| # S E R V E R D A T A |
| # |
| # ------------------------------------------------------------------- |
| # Default ServerData that can be used if asked for before the first |
| # request is made. |
| # |
| # Defaults: |
| # |
| # serverdata.default.serverName= |
| # serverdata.default.serverPort=80 |
| # serverdata.default.serverScheme=http |
| # serverdata.default.scriptName= |
| # serverdata.default.contextPath= |
| # ------------------------------------------------------------------- |
| |
| serverdata.default.serverName= |
| serverdata.default.serverPort=80 |
| serverdata.default.serverScheme=http |
| serverdata.default.scriptName= |
| serverdata.default.contextPath= |
| |
| # ------------------------------------------------------------------- |
| # |
| # M O D U L E C A C H I N G |
| # |
| # ------------------------------------------------------------------- |
| # This determines whether or not to cache the modules in memory. For |
| # development, turn this off. For production, turn this on. |
| # |
| # Default: false |
| # ------------------------------------------------------------------- |
| |
| module.cache=false |
| |
| # If module.cache=true, then how large should we make the hashtables |
| # by default. |
| |
| action.cache.size=20 |
| layout.cache.size=10 |
| navigation.cache.size=10 |
| page.cache.size=5 |
| screen.cache.size=50 |
| scheduledjob.cache.size=10 |
| |
| # ------------------------------------------------------------------- |
| # |
| # M O D U L E P A C K A G E S |
| # |
| # ------------------------------------------------------------------- |
| # This is the "classpath" for Turbine. In order to locate your own |
| # modules, you should add them to this path. For example, if you have |
| # com.company.actions, com.company.screens, com.company.navigations, |
| # then this setting would be "com.company,org.apache.turbine.modules". |
| # This path is searched in order. For example, Turbine comes with a |
| # screen module named "Login". If you wanted to have your own screen |
| # module named "Login", then you would specify the path to your |
| # modules before the others. |
| # |
| # Note: org.apache.turbine.modules will always be added to the search |
| # path. If it is not explicitly added here, it will be added to the |
| # end. |
| # |
| # Default: org.apache.turbine.modules |
| # ------------------------------------------------------------------- |
| |
| module.packages=${package}.modules,${package}.flux.modules,org.apache.turbine.modules |
| |
| # ------------------------------------------------------------------- |
| # |
| # F R A M E W O R K S E T T I N G S |
| # |
| # ------------------------------------------------------------------- |
| # These are settings that control the behavior of the framework, |
| # such as determining whether a template system is in use, what |
| # the default templates and screens are and session handling settings. |
| # ------------------------------------------------------------------- |
| |
| # Used to set the template homepage if you are using a template |
| # layout. This is the template that will be displayed to the user |
| # when no specific template is requested. This is normally executed |
| # as the first template the user sees when they access the system. |
| # |
| # Default: Index.vm |
| |
| template.homepage=Index.vm |
| |
| # This is the default screen to show to people when they first access |
| # the system. This is only used if there is no value for |
| # template.homepage. This is for use when you are not using a |
| # templating system such as Velocity or JSP. |
| # |
| # Default: Login |
| |
| screen.homepage= |
| |
| # This is the template that is shown on an incorrect login attempt. |
| # Setting this property will override any value of screen.login specified |
| # below. |
| # |
| # Default: Login.vm |
| |
| template.login=Login.vm |
| |
| # This is the page that is shown on an incorrect login attempt. It is |
| # referenced in the LoginUser action. This is only used if there is no value |
| # for template.login. This is for use when you are not using a |
| # templating system such as Velocity or JSP. |
| # |
| # Default: Login |
| |
| screen.login= |
| |
| # This is the template that is used by the respective Template based |
| # ErrorScreen for displaying the error. If you are not using a Template based |
| # ErrorScreen, then this is ignored. |
| # |
| # Default: Error.vm |
| |
| template.error=Error.vm |
| |
| # This is the default error screen. |
| # |
| # Default: VelocityErrorScreen |
| |
| screen.error=VelocityErrorScreen |
| |
| # This is the screen that is displayed when the user's web page is in |
| # an invalid state. |
| # |
| # Default: error.InvalidState |
| |
| screen.invalidstate=error.InvalidState |
| |
| # Set the components of the default Doctype for use in html documents. |
| # |
| # Defaults: There are no defaults - if default.html.doctype.root.element is not |
| # set then no default doctype will be available. |
| |
| default.html.doctype.root.element=HTML |
| default.html.doctype.identifier=-//W3C//DTD HTML 4.01 Transitional//EN |
| default.html.doctype.url=http://www.w3.org/TR/1999/REC-html401-19991224/loose.dtd |
| |
| # This is the default action to log a user in. If you write your own |
| # implementation of the login action, make sure that you change this |
| # to reflect the new name. |
| |
| action.login=LoginUserIntake |
| |
| # This is the default action to log a user out. If you write your own |
| # implementation of the logout action, make sure that you change this |
| # to reflect the new name. |
| |
| action.logout=LogoutUser |
| |
| # This is the default action to validate whether or not a session is |
| # valid. For example, if you want to make sure if a user has already |
| # logged in or not. |
| # |
| # Default: SessionValidator |
| |
| action.sessionvalidator=sessionvalidator.TemplateSessionValidator |
| |
| # |
| # Use this setting if you want your application to display the Login Screen |
| # as first action and does not allow any operation before the user has |
| # logged in |
| # |
| # action.sessionvalidator=sessionvalidator.TemplateSecureSessionValidator |
| |
| # This is the timeout in seconds for sessions. If left commented out, the |
| # servlet container's default timeout will be left as is. |
| |
| # session.timeout=1800 |
| |
| # This is the default action that builds up the AccessControlList for |
| # the individual users session. |
| |
| action.accesscontroller=AccessController |
| |
| # |
| # Set this value to true if you want to be able to submit multiple |
| # events to an Action by doing eventSubmit_do<action> and consider |
| # only events that have a non-empty, non-zero value. This is useful |
| # if you submit your form with JavaScript |
| # |
| action.eventsubmit.needsvalue = false |
| |
| # If the web container does not supply an explicit encoding for the |
| # request data, assume that is has this encoding. If you use e.g. |
| # UTF-8 or ISO-8859-<something>, change this parameter to keep your |
| # special characters. Default is ISO-8859-1. |
| # |
| # Check that the encoding valve is active in turbine-classic-pipeline.xml |
| # if you are not seeing the expected behavior. |
| # |
| # input.encoding=UTF-8 |
| |
| |
| |
| # ------------------------------------------------------------------- |
| # |
| # J N D I C O N T E X T S |
| # |
| # ------------------------------------------------------------------- |
| |
| # This indicates whether Turbine should try to create JNDI contexts. |
| # |
| # Default: false |
| # |
| # contexts=true |
| |
| # These are the JNDI context properties. Each context's properties |
| # are defined by the properties beginning with context.name. |
| # |
| # Default: none |
| # |
| # Example: The following will create a JNDI context named "name" in |
| # the data.contexts Hashtable. It will point at the RMI registry on |
| # localhost running on port 1099, and will use |
| # com.sun.jndi.rmi.registry.RegistryContextFactory as the initial |
| # context factory: |
| # |
| # context.name.java.naming.provider.url=rmi://localhost:1099 |
| # context.name.java.naming.factory.initial=com.sun.jndi.rmi.registry.RegistryContextFactory |
| |
| # ------------------------------------------------------------------- |
| # |
| # M E S S A G E S |
| # |
| # ------------------------------------------------------------------- |
| # Note that strings containing "," (comma) characters must backslash |
| # escape the comma (i.e. '\,') |
| |
| # The message that can be displayed before a user logs in. |
| |
| login.message=Thank you for your visit. Please log into the system. |
| |
| # The message that can be displayed when no screen is defined. |
| |
| login.message.noscreen=There has been an error. Your session is valid but the screen variable is not defined. |
| |
| # The message that can be displayed when a user enters an incorrect |
| # password or username. |
| |
| login.error=Sorry your username or password is incorrect! |
| |
| # The message that can be displayed when a user logs out. |
| |
| logout.message=Thank you for using the system. Please come back soon. |
| |
| # ------------------------------------------------------------------- |
| # |
| # S E C U R E S O C K E T S L A Y E R |
| # |
| # ------------------------------------------------------------------- |
| # Whether the web server is able to use SSL. Links in Turbine can |
| # check this property to determine if SSL can be used. |
| # |
| # Default: true |
| # ------------------------------------------------------------------- |
| |
| use.ssl=true |
| |
| # ------------------------------------------------------------------- |
| # |
| # S E R V I C E S |
| # |
| # ------------------------------------------------------------------- |
| # Classes for Turbine Services should be defined here. |
| # Format: services.[name].classname=[implementing class] |
| # |
| # To specify properties of a service use the following syntax: |
| # service.[name].[property]=[value] |
| # |
| # The order that these services is listed is important! The |
| # order that is stated here is the order in which the services |
| # will be initialized. Keep this is mind if you have services |
| # that depend on other services during initialization. |
| # ------------------------------------------------------------------- |
| services.AvalonComponentService.classname=org.apache.turbine.services.avaloncomponent.TurbineYaafiComponentService |
| |
| services.RunDataService.classname=org.apache.turbine.services.rundata.TurbineRunDataService |
| services.ServletService.classname=org.apache.turbine.services.servlet.TurbineServletService |
| services.AssemblerBrokerService.classname=org.apache.turbine.services.assemblerbroker.TurbineAssemblerBrokerService |
| services.PullService.classname=org.apache.turbine.services.pull.TurbinePullService |
| services.TemplateService.classname=org.apache.turbine.services.template.TurbineTemplateService |
| services.SecurityService.classname=org.apache.turbine.services.security.DefaultSecurityService |
| services.UIService.classname = org.apache.turbine.services.ui.TurbineUIService |
| services.VelocityService.classname=org.apache.turbine.services.velocity.TurbineVelocityService |
| services.JsonRpcService.classname=org.apache.turbine.services.jsonrpc.TurbineJsonRpcService |
| services.SchedulerService.classname=org.apache.turbine.services.schedule.QuartzSchedulerService |
| |
| # ------------------------------------------------------------------- |
| # |
| # R U N D A T A S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| # Default implementations of base interfaces for request processing. |
| # Additional configurations can be defined by using other keys |
| # in the place of the <default> key. |
| # ------------------------------------------------------------------- |
| |
| services.RunDataService.default.run.data=org.apache.turbine.services.rundata.DefaultTurbineRunData |
| services.RunDataService.default.parameter.parser=org.apache.fulcrum.parser.DefaultParameterParser |
| services.RunDataService.default.cookie.parser=org.apache.fulcrum.parser.DefaultCookieParser |
| |
| # ------------------------------------------------------------------- |
| # |
| # A S S E M B L E R B R O K E R S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| # A list of AssemblerFactory classes that will be registered |
| # with TurbineAssemblerBrokerService |
| # ------------------------------------------------------------------- |
| |
| services.AssemblerBrokerService.screen=org.apache.turbine.services.assemblerbroker.util.java.JavaScreenFactory |
| services.AssemblerBrokerService.action=org.apache.turbine.services.assemblerbroker.util.java.JavaActionFactory |
| services.AssemblerBrokerService.layout=org.apache.turbine.services.assemblerbroker.util.java.JavaLayoutFactory |
| services.AssemblerBrokerService.page=org.apache.turbine.services.assemblerbroker.util.java.JavaPageFactory |
| services.AssemblerBrokerService.navigation=org.apache.turbine.services.assemblerbroker.util.java.JavaNavigationFactory |
| services.AssemblerBrokerService.scheduledjob=org.apache.turbine.services.assemblerbroker.util.java.JavaScheduledJobFactory |
| |
| # ------------------------------------------------------------------- |
| # |
| # T E M P L A T E S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| |
| # Roughly, the number of templates in each category. |
| # |
| # Defaults: layout=2, navigation=10, screen=50 |
| |
| services.TemplateService.layout.cache.size=2 |
| services.TemplateService.navigation.cache.size=10 |
| services.TemplateService.screen.cache.size=50 |
| |
| # ------------------------------------------------------------------- |
| # |
| # P U L L S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| # These are the properties for the Pull Service, the service |
| # that works in conjunction with the Turbine Pull Model API. |
| # ------------------------------------------------------------------- |
| |
| services.PullService.earlyInit= true |
| |
| # This determines whether the non-request tools are refreshed |
| # on each request (request tools aren't ever, because they're |
| # instantiated for the request only anyway). |
| |
| #services.PullService.tools.per.request.refresh=true |
| |
| # Path to the resources of the application tools, relative to the |
| # application root |
| |
| services.PullService.tools.resources.dir=/resources/ |
| |
| # These are tools that are placed in the context by the service |
| # These tools will be made available to all your |
| # templates. You list the tools in the following way: |
| # |
| # tool.<scope>.<id> = <classname> |
| # |
| # <scope> is the tool scope: global, request, session |
| # or persistent (see below for more details) |
| # <id> is the name of the tool in the context |
| # |
| # You can configure the tools in this way: |
| # tool.<id>.<parameter> = <value> |
| # |
| # So if you find "global", "request", "session" or "persistent" as second |
| # part, it is a configuration to put a tool into the toolbox, else it is a |
| # tool specific configuration. |
| # |
| # For example: |
| # |
| # tool.global.ui = org.apache.turbine.util.pull.tools.UITool |
| # tool.global.mm = org.apache.turbine.util.pull.MessageManager |
| # tool.request.link = org.apache.turbine.services.pull.tools.TemplateLink |
| # tool.request.page = org.apache.turbine.util.template.HtmlPageAttributes |
| # |
| # Then: |
| # |
| # tool.ui.skin = default |
| # |
| # configures the value of "skin" for the "ui" tool. |
| # |
| # Tools are accessible in all templates by the <id> given |
| # to the tool. So for the above listings the UITool would |
| # be available as $ui, the MessageManager as $mm, the TemplateLink |
| # as $link and the HtmlPageAttributes as $page. |
| # |
| # You should avoid using tool names called "global", "request", |
| # "session" or "persistent" because of clashes with the possible Scopes. |
| # |
| # Scopes: |
| # |
| # global: tool is instantiated once and that instance is available |
| # to all templates for all requests. Tool must be threadsafe. |
| # |
| # request: tool is instantiated once for each request (although the |
| # PoolService is used to recycle instances). Tool need not |
| # be threadsafe. |
| # |
| # session: tool is instantiated once for each user session, and is |
| # stored in the user's temporary hashtable. Tool should be |
| # threadsafe. |
| # |
| # authorized: tool is instantiated once for each user session once the |
| # user logs in. After this, it is a normal session tool. |
| # |
| # Defaults: none |
| |
| tool.request.link=org.apache.turbine.services.pull.tools.TemplateLink |
| tool.request.page=org.apache.turbine.util.template.HtmlPageAttributes |
| tool.request.content=org.apache.turbine.services.pull.tools.ContentTool |
| |
| # Localization and Internationalization |
| tool.request.l10n=org.apache.turbine.services.localization.LocalizationTool |
| |
| # This pull tool is to allow for easy formatting of Date object into Strings |
| tool.request.dateFormatter=org.apache.turbine.services.pull.util.DateFormatter |
| |
| # Use this tool if you need a place to store data that will persist between |
| # requests. Any data stored using this tool will be stored in the session. |
| tool.session.sessionData=org.apache.turbine.services.pull.util.SessionData |
| |
| # These are intake tools. |
| tool.request.intake=org.apache.turbine.services.intake.IntakeTool |
| |
| tool.request.related=${package}.services.pull.RelatedTool |
| |
| # This is a tool that allows access to the scheduler service. |
| # tool.request.scheduler=org.apache.turbine.services.schedule.SchedulerTool |
| |
| # The UITool will allow you to skin your Turbine application using simple |
| # properties files that are located in the WEBAPP/resources/ directory |
| # hierarchy. |
| tool.global.ui=org.apache.turbine.services.pull.tools.UITool |
| |
| # Path to the UI resources, relative to the resources directory defined above |
| # tool.ui.dir.skin=/ui/skins |
| |
| # Path to the images of a skin, relative to the skin directory defined above |
| # tool.ui.dir.image=/images |
| |
| # Default CSS file for a skin |
| tool.ui.css=page.css |
| |
| # Default skin name |
| # tool.ui.skin=default |
| |
| # |
| # The ui tool normally returns absolute URIs. |
| # Setting this property to true allows you to change the behavior if you |
| # want only relative URIs (e.g. if you run behind a reverse proxy or a load |
| # balancer). |
| tool.ui.want.relative=true |
| |
| # |
| # The content tool can put its URIs through the Servlet container, |
| # which might attach things like the jsessionid even to URIs that |
| # are not served by the container. |
| # |
| # The default behavior was not to put these through the container. |
| # |
| # Set this to true if you need things like jsessionid attached to all |
| # links generated from the $content pull tool. |
| # |
| tool.content.want.encoding = false |
| |
| # |
| # Both the link and the content tool normally return absolute URIs |
| # You can change this by exchanging the tool classes but this is not |
| # really recommended. Setting these properties to true allow you |
| # to change the behaviour if you want only relative URIs (e.g. if you |
| # run behind a reverse proxy or a load balancer). |
| # |
| tool.content.want.relative = true |
| tool.link.want.relative = true |
| |
| # Flux tool |
| tool.request.flux=${package}.flux.tools.FluxTool |
| |
| # ------------------------------------------------------------------- |
| # |
| # V E L O C I T Y S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| |
| # The location of Velocity configuration file, relative to webapp root |
| # These properties will override the default properties set by Velocity. |
| # You should specify the path to the templates directories as well as |
| # the path to the log file and they should also be relative to webapp root |
| |
| services.VelocityService.template.extension=vm |
| services.VelocityService.default.page = VelocityPage |
| services.VelocityService.default.screen = VelocityScreen |
| services.VelocityService.default.layout = VelocityOnlyLayout |
| services.VelocityService.default.navigation = VelocityNavigation |
| services.VelocityService.default.error.screen = VelocityErrorScreen |
| services.VelocityService.default.layout.template = Default.vm |
| |
| # |
| # Set this to true to catch Velocity Errors and display them in the log file |
| services.VelocityService.catch.errors = true |
| |
| services.VelocityService.input.encoding=UTF-8 |
| |
| # |
| # Class Path Loader, Turbine jar |
| services.VelocityService.velocimacro.library = macros/TurbineMacros.vm,macros/applicationMacros.vm |
| |
| # Set the following line to true to cause velocity to automatically reload |
| # library macro files if they change. This is useful for debugging. |
| services.VelocityService.velocimacro.library.autoreload = true |
| |
| services.VelocityService.resource.loader = file |
| services.VelocityService.file.resource.loader.description = Velocity File Resource Loader |
| services.VelocityService.file.resource.loader.class = org.apache.velocity.runtime.resource.loader.FileResourceLoader |
| services.VelocityService.file.resource.loader.path = /templates/app,/templates/flux |
| services.VelocityService.file.resource.loader.cache = false |
| services.VelocityService.file.resource.loader.modificationCheckInterval = 2 |
| |
| services.VelocityService.resource.loader = classpath |
| services.VelocityService.classpath.resource.loader.description = Velocity Classpath Resource Loader |
| services.VelocityService.classpath.resource.loader.class = org.apache.velocity.runtime.resource.loader.ClasspathResourceLoader |
| |
| # Upgrading from Velocity 1.7.x to Velocity 2.0.x |
| services.VelocityService.runtime.conversion.handler = none |
| services.VelocityService.space.gobbling = bc |
| services.VelocityService.directive.if.emptycheck = false |
| |
| |
| # ------------------------------------------------------------------- |
| # |
| # S C H E D U L E R S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| |
| # |
| # Set enabled to true to start the scheduler. The scheduler can be |
| # stopped and started after Turbine has been initialized. See the |
| # javadocs for org.apache.turbine.services.schedule.TurbineScheduler |
| # for the methods calls. |
| # |
| # Default = false |
| # |
| |
| services.SchedulerService.enabled=false |
| |
| # Determines if the scheduler service should be initialized early. This |
| # Should always be set to true!!!! |
| |
| services.SchedulerService.earlyInit=true |
| |
| # ------------------------------------------------------------------- |
| # |
| # S E C U R I T Y S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| |
| # Configure Torque Security Service |
| services.SecurityService.classname=org.apache.turbine.services.security.DefaultSecurityService |
| services.SecurityService.user.manager = org.apache.turbine.services.security.DefaultUserManager |
| |
| services.SecurityService.user.class=org.apache.fulcrum.security.model.turbine.entity.impl.TurbineUserImpl |
| # define custom wrapper |
| services.SecurityService.wrapper.class = ${package}.wrapper.TurbineUserWrapper |
| |
| |
| # ------------------------------------------------------------------- |
| # |
| # A V A L O N C O M P O N E N T S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| # Components implementing the Avalon lifecycle interfaces can be loaded, |
| # configured and initialized by Turbine |
| # ------------------------------------------------------------------- |
| services.AvalonComponentService.containerConfiguration = /WEB-INF/conf/containerConfiguration.xml |
| |
| # ------------------------------------------------------------------- |
| # |
| # A D D I T I O N A L P R O P E R T I E S |
| # |
| # ------------------------------------------------------------------- |
| # The full path name to an additional properties file. Properties in |
| # this file will be included in this property set. Duplicate name |
| # values will be replaced, so be careful. |
| # |
| # Default: none |
| # ------------------------------------------------------------------- |
| |
| # Required to enable the flux library |
| include=flux.properties |