plugins/experimental/memcache/protocol_binary.h

/*
 * Copyright (c) <2008>, Sun Microsystems, Inc.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in the
 *       documentation and/or other materials provided with the distribution.
 *     * Neither the name of the  nor the
 *       names of its contributors may be used to endorse or promote products
 *       derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY SUN MICROSYSTEMS, INC. ``AS IS'' AND ANY
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL SUN MICROSYSTEMS, INC. BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
/*
 * Summary: Constants used by to implement the binary protocol.
 *
 * Copy: See Copyright for the status of this software.
 *
 * Author: Trond Norbye <trond.norbye@sun.com>
 */

#pragma once

/**
 * This file contains definitions of the constants and packet formats
 * defined in the binary specification. Please note that you _MUST_ remember
 * to convert each multibyte field to / from network byte order to / from
 * host order.
 */
#ifdef __cplusplus
extern "C" {
#endif

/**
 * Definition of the legal "magic" values used in a packet.
 * See section 3.1 Magic byte
 */
typedef enum { PROTOCOL_BINARY_REQ = 0x80, PROTOCOL_BINARY_RES = 0x81 } protocol_binary_magic;

/**
 * Definition of the valid response status numbers.
 * See section 3.2 Response Status
 */
typedef enum {
  PROTOCOL_BINARY_RESPONSE_SUCCESS         = 0x00,
  PROTOCOL_BINARY_RESPONSE_KEY_ENOENT      = 0x01,
  PROTOCOL_BINARY_RESPONSE_KEY_EEXISTS     = 0x02,
  PROTOCOL_BINARY_RESPONSE_E2BIG           = 0x03,
  PROTOCOL_BINARY_RESPONSE_EINVAL          = 0x04,
  PROTOCOL_BINARY_RESPONSE_NOT_STORED      = 0x05,
  PROTOCOL_BINARY_RESPONSE_DELTA_BADVAL    = 0x06,
  PROTOCOL_BINARY_RESPONSE_AUTH_ERROR      = 0x20,
  PROTOCOL_BINARY_RESPONSE_AUTH_CONTINUE   = 0x21,
  PROTOCOL_BINARY_RESPONSE_UNKNOWN_COMMAND = 0x81,
  PROTOCOL_BINARY_RESPONSE_ENOMEM          = 0x82
} protocol_binary_response_status;

/**
 * Definition of the different command opcodes.
 * See section 3.3 Command Opcodes
 */
typedef enum {
  PROTOCOL_BINARY_CMD_GET        = 0x00,
  PROTOCOL_BINARY_CMD_SET        = 0x01,
  PROTOCOL_BINARY_CMD_ADD        = 0x02,
  PROTOCOL_BINARY_CMD_REPLACE    = 0x03,
  PROTOCOL_BINARY_CMD_DELETE     = 0x04,
  PROTOCOL_BINARY_CMD_INCREMENT  = 0x05,
  PROTOCOL_BINARY_CMD_DECREMENT  = 0x06,
  PROTOCOL_BINARY_CMD_QUIT       = 0x07,
  PROTOCOL_BINARY_CMD_FLUSH      = 0x08,
  PROTOCOL_BINARY_CMD_GETQ       = 0x09,
  PROTOCOL_BINARY_CMD_NOOP       = 0x0a,
  PROTOCOL_BINARY_CMD_VERSION    = 0x0b,
  PROTOCOL_BINARY_CMD_GETK       = 0x0c,
  PROTOCOL_BINARY_CMD_GETKQ      = 0x0d,
  PROTOCOL_BINARY_CMD_APPEND     = 0x0e,
  PROTOCOL_BINARY_CMD_PREPEND    = 0x0f,
  PROTOCOL_BINARY_CMD_STAT       = 0x10,
  PROTOCOL_BINARY_CMD_SETQ       = 0x11,
  PROTOCOL_BINARY_CMD_ADDQ       = 0x12,
  PROTOCOL_BINARY_CMD_REPLACEQ   = 0x13,
  PROTOCOL_BINARY_CMD_DELETEQ    = 0x14,
  PROTOCOL_BINARY_CMD_INCREMENTQ = 0x15,
  PROTOCOL_BINARY_CMD_DECREMENTQ = 0x16,
  PROTOCOL_BINARY_CMD_QUITQ      = 0x17,
  PROTOCOL_BINARY_CMD_FLUSHQ     = 0x18,
  PROTOCOL_BINARY_CMD_APPENDQ    = 0x19,
  PROTOCOL_BINARY_CMD_PREPENDQ   = 0x1a,

  PROTOCOL_BINARY_CMD_SASL_LIST_MECHS = 0x20,
  PROTOCOL_BINARY_CMD_SASL_AUTH       = 0x21,
  PROTOCOL_BINARY_CMD_SASL_STEP       = 0x22,

  /* These commands are used for range operations and exist within
   * this header for use in other projects.  Range operations are
   * not expected to be implemented in the memcached server itself.
   */
  PROTOCOL_BINARY_CMD_RGET      = 0x30,
  PROTOCOL_BINARY_CMD_RSET      = 0x31,
  PROTOCOL_BINARY_CMD_RSETQ     = 0x32,
  PROTOCOL_BINARY_CMD_RAPPEND   = 0x33,
  PROTOCOL_BINARY_CMD_RAPPENDQ  = 0x34,
  PROTOCOL_BINARY_CMD_RPREPEND  = 0x35,
  PROTOCOL_BINARY_CMD_RPREPENDQ = 0x36,
  PROTOCOL_BINARY_CMD_RDELETE   = 0x37,
  PROTOCOL_BINARY_CMD_RDELETEQ  = 0x38,
  PROTOCOL_BINARY_CMD_RINCR     = 0x39,
  PROTOCOL_BINARY_CMD_RINCRQ    = 0x3a,
  PROTOCOL_BINARY_CMD_RDECR     = 0x3b,
  PROTOCOL_BINARY_CMD_RDECRQ    = 0x3c
  /* End Range operations */

} protocol_binary_command;

/**
 * Definition of the data types in the packet
 * See section 3.4 Data Types
 */
typedef enum { PROTOCOL_BINARY_RAW_BYTES = 0x00 } protocol_binary_datatypes;

/**
 * Definition of the header structure for a request packet.
 * See section 2
 */
typedef union {
  struct {
    uint8_t magic;
    uint8_t opcode;
    uint16_t keylen;
    uint8_t extlen;
    uint8_t datatype;
    uint16_t reserved;
    uint32_t bodylen;
    uint32_t opaque;
    uint64_t cas;
  } request;
  uint8_t bytes[24];
} protocol_binary_request_header;

/**
 * Definition of the header structure for a response packet.
 * See section 2
 */
typedef union {
  struct {
    uint8_t magic;
    uint8_t opcode;
    uint16_t keylen;
    uint8_t extlen;
    uint8_t datatype;
    uint16_t status;
    uint32_t bodylen;
    uint32_t opaque;
    uint64_t cas;
  } response;
  uint8_t bytes[24];
} protocol_binary_response_header;

/**
 * Definition of a request-packet containing no extras
 */
typedef union {
  struct {
    protocol_binary_request_header header;
  } message;
  uint8_t bytes[sizeof(protocol_binary_request_header)];
} protocol_binary_request_no_extras;

/**
 * Definition of a response-packet containing no extras
 */
typedef union {
  struct {
    protocol_binary_response_header header;
  } message;
  uint8_t bytes[sizeof(protocol_binary_response_header)];
} protocol_binary_response_no_extras;

/**
 * Definition of the packet used by the get, getq, getk and getkq command.
 * See section 4
 */
typedef protocol_binary_request_no_extras protocol_binary_request_get;
typedef protocol_binary_request_no_extras protocol_binary_request_getq;
typedef protocol_binary_request_no_extras protocol_binary_request_getk;
typedef protocol_binary_request_no_extras protocol_binary_request_getkq;

/**
 * Definition of the packet returned from a successful get, getq, getk and
 * getkq.
 * See section 4
 */
typedef union {
  struct {
    protocol_binary_response_header header;
    struct {
      uint32_t flags;
    } body;
  } message;
  uint8_t bytes[sizeof(protocol_binary_response_header) + 4];
} protocol_binary_response_get;

typedef protocol_binary_response_get protocol_binary_response_getq;
typedef protocol_binary_response_get protocol_binary_response_getk;
typedef protocol_binary_response_get protocol_binary_response_getkq;

/**
 * Definition of the packet used by the delete command
 * See section 4
 */
typedef protocol_binary_request_no_extras protocol_binary_request_delete;

/**
 * Definition of the packet returned by the delete command
 * See section 4
 */
typedef protocol_binary_response_no_extras protocol_binary_response_delete;

/**
 * Definition of the packet used by the flush command
 * See section 4
 * Please note that the expiration field is optional, so remember to see
 * check the header.bodysize to see if it is present.
 */
typedef union {
  struct {
    protocol_binary_request_header header;
    struct {
      uint32_t expiration;
    } body;
  } message;
  uint8_t bytes[sizeof(protocol_binary_request_header) + 4];
} protocol_binary_request_flush;

/**
 * Definition of the packet returned by the flush command
 * See section 4
 */
typedef protocol_binary_response_no_extras protocol_binary_response_flush;

/**
 * Definition of the packet used by set, add and replace
 * See section 4
 */
typedef union {
  struct {
    protocol_binary_request_header header;
    struct {
      uint32_t flags;
      uint32_t expiration;
    } body;
  } message;
  uint8_t bytes[sizeof(protocol_binary_request_header) + 8];
} protocol_binary_request_set;
typedef protocol_binary_request_set protocol_binary_request_add;
typedef protocol_binary_request_set protocol_binary_request_replace;

/**
 * Definition of the packet returned by set, add and replace
 * See section 4
 */
typedef protocol_binary_response_no_extras protocol_binary_response_set;
typedef protocol_binary_response_no_extras protocol_binary_response_add;
typedef protocol_binary_response_no_extras protocol_binary_response_replace;

/**
 * Definition of the noop packet
 * See section 4
 */
typedef protocol_binary_request_no_extras protocol_binary_request_noop;

/**
 * Definition of the packet returned by the noop command
 * See section 4
 */
typedef protocol_binary_response_no_extras protocol_binary_response_noop;

/**
 * Definition of the structure used by the increment and decrement
 * command.
 * See section 4
 */
typedef union {
  struct {
    protocol_binary_request_header header;
    struct {
      uint64_t delta;
      uint64_t initial;
      uint32_t expiration;
    } body;
  } message;
  uint8_t bytes[sizeof(protocol_binary_request_header) + 20];
} protocol_binary_request_incr;
typedef protocol_binary_request_incr protocol_binary_request_decr;

/**
 * Definition of the response from an incr or decr command
 * command.
 * See section 4
 */
typedef union {
  struct {
    protocol_binary_response_header header;
    struct {
      uint64_t value;
    } body;
  } message;
  uint8_t bytes[sizeof(protocol_binary_response_header) + 8];
} protocol_binary_response_incr;
typedef protocol_binary_response_incr protocol_binary_response_decr;

/**
 * Definition of the quit
 * See section 4
 */
typedef protocol_binary_request_no_extras protocol_binary_request_quit;

/**
 * Definition of the packet returned by the quit command
 * See section 4
 */
typedef protocol_binary_response_no_extras protocol_binary_response_quit;

/**
 * Definition of the packet used by append and prepend command
 * See section 4
 */
typedef protocol_binary_request_no_extras protocol_binary_request_append;
typedef protocol_binary_request_no_extras protocol_binary_request_prepend;

/**
 * Definition of the packet returned from a successful append or prepend
 * See section 4
 */
typedef protocol_binary_response_no_extras protocol_binary_response_append;
typedef protocol_binary_response_no_extras protocol_binary_response_prepend;

/**
 * Definition of the packet used by the version command
 * See section 4
 */
typedef protocol_binary_request_no_extras protocol_binary_request_version;

/**
 * Definition of the packet returned from a successful version command
 * See section 4
 */
typedef protocol_binary_response_no_extras protocol_binary_response_version;

/**
 * Definition of the packet used by the stats command.
 * See section 4
 */
typedef protocol_binary_request_no_extras protocol_binary_request_stats;

/**
 * Definition of the packet returned from a successful stats command
 * See section 4
 */
typedef protocol_binary_response_no_extras protocol_binary_response_stats;

/**
 * Definition of a request for a range operation.
 * See http://code.google.com/p/memcached/wiki/RangeOps
 *
 * These types are used for range operations and exist within
 * this header for use in other projects.  Range operations are
 * not expected to be implemented in the memcached server itself.
 */
typedef union {
  struct {
    protocol_binary_response_header header;
    struct {
      uint16_t size;
      uint8_t reserved;
      uint8_t flags;
      uint32_t max_results;
    } body;
  } message;
  uint8_t bytes[sizeof(protocol_binary_request_header) + 4];
} protocol_binary_request_rangeop;

typedef protocol_binary_request_rangeop protocol_binary_request_rget;
typedef protocol_binary_request_rangeop protocol_binary_request_rset;
typedef protocol_binary_request_rangeop protocol_binary_request_rsetq;
typedef protocol_binary_request_rangeop protocol_binary_request_rappend;
typedef protocol_binary_request_rangeop protocol_binary_request_rappendq;
typedef protocol_binary_request_rangeop protocol_binary_request_rprepend;
typedef protocol_binary_request_rangeop protocol_binary_request_rprependq;
typedef protocol_binary_request_rangeop protocol_binary_request_rdelete;
typedef protocol_binary_request_rangeop protocol_binary_request_rdeleteq;
typedef protocol_binary_request_rangeop protocol_binary_request_rincr;
typedef protocol_binary_request_rangeop protocol_binary_request_rincrq;
typedef protocol_binary_request_rangeop protocol_binary_request_rdecr;
typedef protocol_binary_request_rangeop protocol_binary_request_rdecrq;

#ifdef __cplusplus
}
#endif