Google Git
Sign in
apache / trafficserver / ee5a7a411e3397cf362ef58b9071543021fd577b / . / doc / admin-guide / plugins / lua.en.rst
blob: dd0d1979b8047fc33b95e155888bc3c8c5099075 [file] [log] [blame]
.. Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements. See the NOTICE file
distributed with this work for additional information
regarding copyright ownership. The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied. See the License for the
specific language governing permissions and limitations
under the License.
.. include:: ../../common.defs
.. _admin-plugins-ts-lua:
Lua Plugin
**********
This module embeds Lua, via the standard Lua 5.1 interpreter, into |ATS|. With
this module, we can implement ATS plugin by writing Lua script instead of C
code. Lua code executed using this module can be 100% non-blocking because the
powerful Lua coroutines have been integrated into the ATS event model.
Synopsis
========
**test_hdr.lua**
::
function send_response()
ts.client_response.header['Rhost'] = ts.ctx['rhost']
return 0
end
function do_remap()
local req_host = ts.client_request.header.Host
ts.ctx['rhost'] = string.reverse(req_host)
ts.hook(TS_LUA_HOOK_SEND_RESPONSE_HDR, send_response)
return 0
end
**sethost.lua**
::
local HOSTNAME = ''
function __init__(argtb)
if (#argtb) < 1 then
ts.debug(argtb[0] .. ' hostname parameter required!!')
return -1
end
HOSTNAME = argtb[1]
end
function do_remap()
ts.client_request.header['Host'] = HOSTNAME
return 0
end
Installation
============
This plugin is only built if LuaJIT (>2.0.4) is installed. The configure option
::
--with-luajit=<path to luajit prefix>
can be used to specify a LuaJIT install. Otherwise, configure will use pkg-config to find a viable installation.
Configuration
=============
This module acts as remap plugin of Traffic Server, so we should realize 'do_remap' or 'do_os_response' function in each
lua script. The path referencing a file with the lua script can be relative to the configuration directory or an absolute
path. We can write this in remap.config:
::
map http://a.tbcdn.cn/ http://inner.tbcdn.cn/ @plugin=/XXX/tslua.so @pparam=/XXX/test_hdr.lua
Sometimes we want to receive parameters and process them in the script, we should realize '__init__' function in the lua
script, and we can write this in remap.config:
::
map http://a.x.cn/ http://b.x.cn/ @plugin=/X/tslua.so @pparam=/X/sethost.lua @pparam=a.st.cn
This module can also act as a global plugin of Traffic Server. In this case we should provide one of these functions in
each lua script:
- **'do_global_txn_start'**
- **'do_global_txn_close'**
- **'do_global_os_dns'**
- **'do_global_pre_remap'**
- **'do_global_post_remap'**
- **'do_global_read_request'**
- **'do_global_send_request'**
- **'do_global_read_response'**
- **'do_global_send_response'**
- **'do_global_cache_lookup_complete'**
- **'do_global_read_cache'**
We can write this in plugin.config:
::
tslua.so /etc/trafficserver/script/test_global_hdr.lua
We can also define the number of Lua states to be used for the plugin. If it is used as global plugin, we can write the
following in plugin.config
::
tslua.so --states=64 /etc/trafficserver/script/test_global_hdr.lua
If it is used as remap plugin, we can write the following in remap.config to define the number of Lua states
::
map http://a.tbcdn.cn/ http://inner.tbcdn.cn/ @plugin=/XXX/tslua.so @pparam=--states=64 @pparam=/XXX/test_hdr.lua
TS API for Lua
==============
Introduction
------------
The API is exposed to Lua in the form of one standard packages ``ts``. This package is in the default global scope and
is always available within lua script. This package can be introduced into Lua like this:
::
ts.say('Hello World')
ts.sleep(10)
:ref:`TOP <admin-plugins-ts-lua>`
ts.process.uuid
---------------
**syntax:** *val = ts.process.uuid()*
**context:** global
**description:** This function returns the global process id.
Here is an example:
::
local pid = ts.process.uuid() -- a436bae6-082c-4805-86af-78a5916c4a91
:ref:`TOP <admin-plugins-ts-lua>`
ts.now
------
**syntax:** *val = ts.now()*
**context:** global
**description:** This function returns the time since the Epoch (00:00:00 UTC, January 1, 1970), measured in seconds. It
includes milliseconds as the decimal part.
Here is an example:
::
local nt = ts.now() -- 1395221053.123
:ref:`TOP <admin-plugins-ts-lua>`
ts.debug
--------
**syntax:** *ts.debug(TAG?, MESSAGE)*
**context:** global
**description**: Log the MESSAGE to traffic.out if debug TAG is enabled(the default TAG is **ts_lua**).
Here is an example:
::
ts.debug('I am in do_remap now.')
ts.debug("scw", "hello world")
We should write this TAG in records.config(If TAG is missing, default TAG will be set):
``CONFIG proxy.config.diags.debug.tags STRING TAG``
:ref:`TOP <admin-plugins-ts-lua>`
ts.error
--------
**syntax:** *ts.error(MESSAGE)*
**context:** global
**description**: Log the MESSAGE to error.log
Here is an example:
::
ts.error('This is an error message')
:ref:`TOP <admin-plugins-ts-lua>`
TS Basic Internal Information
-----------------------------
**syntax:** *ts.get_install_dir()*
**syntax:** *ts.get_runtime_dir()*
**syntax:** *ts.get_config_dir()*
**syntax:** *ts.get_plugin_dir()*
**syntax:** *ts.get_traffic_server_version()*
**context:** global
**description**: get basic internal information for the TS instance, such as install directory, runtime directory,
config directory, plugin directory and version of ATS
Here is an example:
::
local config_dir = ts.get_config_dir()
:ref:`TOP <admin-plugins-ts-lua>`
Remap status constants
----------------------
**context:** do_remap
::
TS_LUA_REMAP_NO_REMAP (0)
TS_LUA_REMAP_DID_REMAP (1)
TS_LUA_REMAP_NO_REMAP_STOP (2)
TS_LUA_REMAP_DID_REMAP_STOP (3)
TS_LUA_REMAP_ERROR (-1)
These constants are usually used as return value of do_remap function.
:ref:`TOP <admin-plugins-ts-lua>`
ts.remap.get_to_url_host
------------------------
**syntax:** *ts.remap.get_to_url_host()*
**context:** do_remap
**description**: retrieve the "to" host of the remap rule
Here is an example:
::
function do_remap()
local to_host = ts.remap.get_to_url_host()
ts.debug(to_host)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.remap.get_to_url_port
------------------------
**syntax:** *ts.remap.get_to_url_port()*
**context:** do_remap
**description**: retrieve the "to" port of the remap rule
:ref:`TOP <admin-plugins-ts-lua>`
ts.remap.get_to_url_scheme
--------------------------
**syntax:** *ts.remap.get_to_url_scheme()*
**context:** do_remap
**description**: retrieve the "to" scheme of the remap rule
:ref:`TOP <admin-plugins-ts-lua>`
ts.remap.get_to_uri
-------------------
**syntax:** *ts.remap.get_to_uri()*
**context:** do_remap
**description**: retrieve the "to" path of the remap rule
:ref:`TOP <admin-plugins-ts-lua>`
ts.remap.get_to_url
-------------------
**syntax:** *ts.remap.get_to_url()*
**context:** do_remap
**description**: retrieve the "to" url of the remap rule
:ref:`TOP <admin-plugins-ts-lua>`
ts.remap.get_from_url_host
--------------------------
**syntax:** *ts.remap.get_from_url_host()*
**context:** do_remap
**description**: retrieve the "from" host of the remap rule
:ref:`TOP <admin-plugins-ts-lua>`
ts.remap.get_from_url_port
--------------------------
**syntax:** *ts.remap.get_from_url_port()*
**context:** do_remap
**description**: retrieve the "from" port of the remap rule
:ref:`TOP <admin-plugins-ts-lua>`
ts.remap.get_from_url_scheme
----------------------------
**syntax:** *ts.remap.get_from_url_scheme()*
**context:** do_remap
**description**: retrieve the "from" scheme of the remap rule
:ref:`TOP <admin-plugins-ts-lua>`
ts.remap.get_from_uri
---------------------
**syntax:** *ts.remap.get_from_uri()*
**context:** do_remap
**description**: retrieve the "from" path of the remap rule
:ref:`TOP <admin-plugins-ts-lua>`
ts.remap.get_from_url
---------------------
**syntax:** *ts.remap.get_from_url()*
**context:** do_remap
**description**: retrieve the "from" url of the remap rule
:ref:`TOP <admin-plugins-ts-lua>`
ts.hook
-------
**syntax:** *ts.hook(HOOK_POINT, FUNCTION)*
**context:** global or do_remap/do_os_response or do_global_* or later
**description**: Hooks are points in http transaction processing where we can step in and do some work. FUNCTION will be
called when the http transaction steps in to HOOK_POINT.
Here is an example
::
function send_response()
s.client_response.header['SHE'] = 'belief'
end
function do_remap()
ts.hook(TS_LUA_HOOK_SEND_RESPONSE_HDR, send_response)
end
Then the client will get the response like this:
::
HTTP/1.1 200 OK
Content-Type: text/html
Server: ATS/3.2.0
SHE: belief
Connection: Keep-Alive
...
You can create global hook as well
::
function do_some_work()
ts.debug('do_some_work')
return 0
end
ts.hook(TS_LUA_HOOK_READ_REQUEST_HDR, do_some_work)
Or you can do it this way
::
ts.hook(TS_LUA_HOOK_READ_REQUEST_HDR,
function()
ts.debug('do_some_work')
return 0
end
)
Also the return value of the function will control how the transaction will be re-enabled. Return value of 0 will cause
the transaction to be re-enabled normally (TS_EVENT_HTTP_CONTINUE). Return value of 1 will be using TS_EVENT_HTTP_ERROR
instead.
:ref:`TOP <admin-plugins-ts-lua>`
Hook point constants
--------------------
::
TS_LUA_HOOK_OS_DNS
TS_LUA_HOOK_PRE_REMAP
TS_LUA_HOOK_READ_CACHE_HDR
TS_LUA_HOOK_TXN_CLOSE
TS_LUA_HOOK_POST_REMAP
TS_LUA_HOOK_CACHE_LOOKUP_COMPLETE
TS_LUA_HOOK_READ_REQUEST_HDR
TS_LUA_HOOK_SEND_REQUEST_HDR
TS_LUA_HOOK_READ_RESPONSE_HDR
TS_LUA_HOOK_SEND_RESPONSE_HDR
TS_LUA_REQUEST_TRANSFORM
TS_LUA_RESPONSE_TRANSFORM
These constants are usually used in ts.hook method call.
Additional Information:
+-----------------------+---------------------------+----------------------+--------------------+----------------------+
| Hook Point | Lua Hook Point constant | Hook function be | Hook function be | Hook function be |
| | | registered within | registered within | registered within |
| | | do_remap() via | do_os_response() | global context via |
| | | ts.hook()? | via ts.hook()? | ts.hook()? |
+=======================+===========================+======================+====================+======================+
| TS_HTTP_TXN | TS_LUA_HOOK | NO | NO | YES |
| _START_HOOK | _TXN_START | | | |
+-----------------------+---------------------------+----------------------+--------------------+----------------------+
| TS_HTTP_READ | TS_LUA_HOOK | NO | NO | YES |
| _REQUEST_HDR_HOOK | _READ_REQUEST_HDR | | | |
+-----------------------+---------------------------+----------------------+--------------------+----------------------+
| TS_HTTP_PRE | TS_LUA_HOOK | NO | NO | YES |
| _REMAP_HOOK | _PRE_REMAP | | | |
+-----------------------+---------------------------+----------------------+--------------------+----------------------+
| TS_HTTP_POST | TS_LUA_HOOK | YES | NO | YES |
| _REMAP_HOOK | _POST_REMAP | | | |
+-----------------------+---------------------------+----------------------+--------------------+----------------------+
| TS_HTTP_READ | TS_LUA_HOOK | YES | NO | YES |
| _CACHE_HDR_HOOK | _READ_CACHE_HDR | | | |
+-----------------------+---------------------------+----------------------+--------------------+----------------------+
| TS_HTTP_OS | TS_LUA_HOOK | YES | NO | YES |
| _DNS_HOOK | _OS_DNS | | | |
+-----------------------+---------------------------+----------------------+--------------------+----------------------+
| TS_HTTP_CACHE | TS_LUA_HOOK | YES | NO | YES |
| _LOOKUP_COMPLETE_HOOK | _CACHE_LOOKUP_COMPLETE | | | |
+-----------------------+---------------------------+----------------------+--------------------+----------------------+
| TS_HTTP_SEND | TS_LUA_HOOK | YES | NO | YES |
| _REQUEST_HDR_HOOK | _SEND_REQUEST_HDR | | | |
+-----------------------+---------------------------+----------------------+--------------------+----------------------+
| TS_HTTP_READ | TS_LUA_HOOK | YES | YES | YES |
| _RESPONSE_HDR_HOOK | _READ_RESPONSE_HDR | | | |
+-----------------------+---------------------------+----------------------+--------------------+----------------------+
| TS_HTTP_SEND | TS_LUA_HOOK | YES | YES | YES |
| _RESPONSE_HDR_HOOK | _SEND_RESPONSE_HDR | | | |
+-----------------------+---------------------------+----------------------+--------------------+----------------------+
| TS_HTTP_REQUEST | TS_LUA_REQUEST_TRANSFORM | YES | NO | YES |
| _TRANSFORM_HOOK | | | | |
+-----------------------+---------------------------+----------------------+--------------------+----------------------+
| TS_HTTP_RESPONSE | TS_LUA_RESPONSE_TRANSFORM | YES | YES | YES |
| _TRANSFORM_HOOK | | | | |
+-----------------------+---------------------------+----------------------+--------------------+----------------------+
| TS_HTTP_TXN | TS_LUA_HOOK_TXN_CLOSE | YES | YES | YES |
| _CLOSE_HOOK | | | | |
+-----------------------+---------------------------+----------------------+--------------------+----------------------+
:ref:`TOP <admin-plugins-ts-lua>`
ts.ctx
------
**syntax:** *ts.ctx[KEY] = VALUE*
**syntax:** *VALUE = ts.ctx[KEY]*
**context:** do_remap/do_os_response or do_global_* or later
**description:** This table can be used to store per-request Lua context data and has a life time identical to the
current request.
Here is an example:
::
function send_response()
ts.client_response.header['F-Header'] = ts.ctx['hdr']
return 0
end
function do_remap()
ts.ctx['hdr'] = 'foo'
ts.hook(TS_LUA_HOOK_SEND_RESPONSE_HDR, send_response)
return 0
end
Then the client will get the response like this:
::
HTTP/1.1 200 OK
Content-Type: text/html
Server: ATS/3.2.0
F-Header: foo
Connection: Keep-Alive
...
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.get_method
----------------------------
**syntax:** *ts.client_request.get_method()*
**context:** do_remap/do_os_response or do_global_* or later
**description:** This function can be used to retrieve the current client request's method name. String like "GET" or
"POST" is returned.
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.set_method
----------------------------
**syntax:** *ts.client_request.set_method()*
**context:** do_remap or do_global_*
**description:** This function can be used to override the current client request's method with METHOD_NAME.
ts.client_request.get_version
-----------------------------
**syntax:** *ver = ts.client_request.get_version()*
**context:** do_remap/do_os_response or do_global_* or later
**description:** Return the http version string of the client request.
Current possible values are 1.0, 1.1, and 0.9.
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.set_version
-----------------------------
**syntax:** *ts.client_request.set_version(VERSION_STR)*
**context:** do_remap or do_global_* or later
**description:** Set the http version of the client request with the VERSION_STR
::
ts.client_request.set_version('1.0')
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.get_uri
-------------------------
**syntax:** *ts.client_request.get_uri()*
**context:** do_remap/do_os_response or later
**description:** This function can be used to retrieve the client request's path.
Here is an example:
::
function do_remap()
local uri = ts.client_request.get_uri()
ts.debug(uri)
end
Then ``GET /st?a=1`` will yield the output:
``/st``
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.set_uri
-------------------------
**syntax:** *ts.client_request.set_uri(PATH)*
**context:** do_remap or do_global_*
**description:** This function can be used to override the client request's path.
The PATH argument must be a Lua string and starts with ``/``
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.get_uri_args
------------------------------
**syntax:** *ts.client_request.get_uri_args()*
**context:** do_remap/do_os_response or do_global_* or later
**description:** This function can be used to retrieve the client request's query string.
Here is an example:
::
function do_remap()
local query = ts.client_request.get_uri_args()
ts.debug(query)
end
Then ``GET /st?a=1&b=2`` will yield the output:
``a=1&b=2``
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.set_uri_args
------------------------------
**syntax:** *ts.client_request.set_uri_args(QUERY_STRING)*
**context:** do_remap or do_global_*
**description:** This function can be used to override the client request's query string.
::
ts.client_request.set_uri_args('n=6&p=7')
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.get_uri_params
--------------------------------
**syntax:** *ts.client_request.get_uri_params()*
**context:** do_remap/do_os_response or do_global_* or later
**description:** This function can be used to retrieve the client request's parameter string.
Here is an example:
::
function do_remap()
local query = ts.client_request.get_uri_params()
ts.debug(query)
end
Then ``GET /st;a=1`` will yield the output:
``a=1``
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.set_uri_params
--------------------------------
**syntax:** *ts.client_request.set_uri_params(PARAMETER_STRING)*
**context:** do_remap or do_global_*
**description:** This function can be used to override the client request's parameter string.
::
ts.client_request.set_uri_params('n=6')
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.get_url
-------------------------
**syntax:** *ts.client_request.get_url()*
**context:** do_remap/do_os_response or do_global_* or later
**description:** This function can be used to retrieve the client request url (:c:func:`TSHttpTxnEffectiveUrlStringGet`).
Here is an example:
::
function do_remap()
local url = ts.client_request.get_url()
ts.debug(url)
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.get_pristine_url
----------------------------------
**syntax:** *ts.client_request.get_pristine_url()*
**context:** do_remap/do_os_response or do_global_* or later
**description:** This function can be used to retrieve the client request pristine url.
Here is an example:
::
function do_remap()
local url = ts.client_request.get_pristine_url()
ts.debug(url)
end
Then ``GET /st?a=1&b=2 HTTP/1.1\r\nHost: a.tbcdn.cn\r\n...`` will yield the output:
``http://a.tbcdn.cn/st?a=1&b=2``
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.header.HEADER
-------------------------------
**syntax:** *ts.client_request.header.HEADER = VALUE*
**syntax:** *ts.client_request.header[HEADER] = VALUE*
**syntax:** *VALUE = ts.client_request.header.HEADER*
**context:** do_remap/do_os_response or do_global_* or later
**description:** Set, add to, clear or get the current client request's HEADER.
Here is an example:
::
function do_remap()
local ua = ts.client_request.header['User-Agent']
ts.debug(ua)
ts.client_request.header['Host'] = 'a.tbcdn.cn'
end
Then ``GET /st HTTP/1.1\r\nHost: b.tb.cn\r\nUser-Agent: Mozilla/5.0\r\n...`` will yield the output:
``Mozilla/5.0``
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.get_headers
-----------------------------
**syntax:** *ts.client_request.get_headers()*
**context:** do_remap/do_os_response or do_global_* or later
**description:** Returns a Lua table holding all the headers for the current client request.
Here is an example:
::
function do_remap()
hdrs = ts.client_request.get_headers()
for k, v in pairs(hdrs) do
ts.debug(k..': '..v)
end
end
Then ``GET /st HTTP/1.1\r\nHost: b.tb.cn\r\nUser-Aget: Mozilla/5.0\r\nAccept: */*`` will yield the output ::
Host: b.tb.cn
User-Agent: Mozilla/5.0
Accept: */*
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.client_addr.get_addr
--------------------------------------
**syntax:** *ts.client_request.client_addr.get_addr()*
**context:** do_remap/do_os_response or do_global_* or later
**description**: This function can be used to get socket address of the client.
The ts.client_request.client_addr.get_addr function returns three values, ip is a string, port and family is number.
Here is an example:
::
function do_remap()
ip, port, family = ts.client_request.client_addr.get_addr()
ts.debug(ip) -- 192.168.231.17
ts.debug(port) -- 17786
ts.debug(family) -- 2(AF_INET)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.client_addr.get_incoming_port
-----------------------------------------------
**syntax:** *ts.client_request.client_addr.get_incoming_port()*
**context:** do_remap/do_os_response or do_global_* or later
**description**: This function can be used to get incoming port of the request.
The ts.client_request.client_addr.get_incoming_port function returns incoming port as number.
Here is an example:
::
function do_global_read_request()
port = ts.client_request.client_addr.get_incoming_port()
ts.debug(port) -- 80
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.get_url_host
------------------------------
**syntax:** *host = ts.client_request.get_url_host()*
**context:** do_remap/do_os_response or do_global_* or later
**description:** Return the ``host`` field of the request url.
Here is an example:
::
function do_remap()
local url_host = ts.client_request.get_url_host()
ts.debug(url_host)
end
Then ``GET /liuyurou.txt HTTP/1.1\r\nHost: 192.168.231.129:8080\r\n...`` will yield the output:
``192.168.231.129``
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.set_url_host
------------------------------
**syntax:** *ts.client_request.set_url_host(str)*
**context:** do_remap or do_global_*
**description:** Set ``host`` field of the request url with ``str``. This function is used to change the address of the
origin server, and we should return TS_LUA_REMAP_DID_REMAP(_STOP) in do_remap.
Here is an example:
::
function do_remap()
ts.client_request.set_url_host('192.168.231.130')
ts.client_request.set_url_port(80)
ts.client_request.set_url_scheme('http')
return TS_LUA_REMAP_DID_REMAP
end
remap.config like this:
::
map http://192.168.231.129:8080/ http://192.168.231.129:9999/
Then server request will connect to ``192.168.231.130:80``
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.get_url_port
------------------------------
**syntax:** *port = ts.client_request.get_url_port()*
**context:** do_remap/do_os_response or do_global_* or later
**description:** Returns the ``port`` field of the request url as a Lua number.
Here is an example:
::
function do_remap()
local url_port = ts.client_request.get_url_port()
ts.debug(url_port)
end
Then Then ``GET /liuyurou.txt HTTP/1.1\r\nHost: 192.168.231.129:8080\r\n...`` will yield the output:
``8080``
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.set_url_port
------------------------------
**syntax:** *ts.client_request.set_url_port(NUMBER)*
**context:** do_remap or do_global_*
**description:** Set ``port`` field of the request url with ``NUMBER``. This function is used to change the address of
the origin server, and we should return TS_LUA_REMAP_DID_REMAP(_STOP) in do_remap.
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.get_url_scheme
--------------------------------
**syntax:** *scheme = ts.client_request.get_url_scheme()*
**context:** do_remap/do_os_response or do_global_* or later
**description:** Return the ``scheme`` field of the request url.
Here is an example:
::
function do_remap()
local url_scheme = ts.client_request.get_url_scheme()
ts.debug(url_scheme)
end
Then ``GET /liuyurou.txt HTTP/1.1\r\nHost: 192.168.231.129:8080\r\n...`` will yield the output:
``http``
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.set_url_scheme
--------------------------------
**syntax:** *ts.client_request.set_url_scheme(str)*
**context:** do_remap or do_global_*
**description:** Set ``scheme`` field of the request url with ``str``. This function is used to change the scheme of the
server request, and we should return TS_LUA_REMAP_DID_REMAP(_STOP) in do_remap.
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.get_ssl_reused
-----------------------------------------------
**syntax:** *ts.client_request.get_ssl_reused()*
**context:** do_remap/do_os_response or do_global_* or later
**description**: This function can be used to know if the SSL session has been reused (1) or not (0)
Here is an example:
::
function do_global_read_request()
ssl_reused = ts.client_request.get_ssl_reused()
ts.debug(ssl_reused) -- 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.get_ssl_protocol
-----------------------------------------------
**syntax:** *ts.client_request.get_ssl_protocol()*
**context:** do_remap/do_os_response or do_global_* or later
**description**: This function can be used to get the SSL protocol used to communicate with the client
Here is an example:
::
function do_global_read_request()
ssl_protocol = ts.client_request.get_ssl_protocol()
ts.debug(ssl_protocol) -- TLSv1.2
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.get_ssl_cipher
-----------------------------------------------
**syntax:** *ts.client_request.get_ssl_cipher()*
**context:** do_remap/do_os_response or do_global_* or later
**description**: This function can be used to get the SSL cipher used to communicate with the client
Here is an example:
::
function do_global_read_request()
ssl_cipher = ts.client_request.get_ssl_cipher()
ts.debug(ssl_cipher) -- ECDHE-ECDSA-AES256-GCM-SHA384
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_request.get_ssl_curve
-----------------------------------------------
**syntax:** *ts.client_request.get_ssl_curve()*
**context:** do_remap/do_os_response or do_global_* or later
**description**: This function can be used to get the SSL Elliptic curve used to communicate with the client
Here is an example:
::
function do_global_read_request()
ssl_curve = ts.client_request.get_ssl_curve()
ts.debug(ssl_curve) -- X25519
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.set_cache_url
---------------------
**syntax:** *ts.http.set_cache_url(KEY_URL)*
**context:** do_remap or do_global_*
**description:** This function can be used to modify the cache key for the client request.
Here is an example:
::
function do_remap()
ts.http.set_cache_url('http://a.tbcdn.cn/foo')
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.get_cache_lookup_url
----------------------------
**syntax:** *ts.http.get_cache_lookup_url()*
**context:** do_global_cache_lookup_complete
**description:** This function can be used to get the cache lookup url for the client request.
Here is an example
::
function cache_lookup()
ts.http.set_cache_lookup_url('http://bad.com/bad.html')
local cache = ts.http.get_cache_lookup_url()
ts.debug(cache)
end
function do_remap()
ts.hook(TS_LUA_HOOK_CACHE_LOOKUP_COMPLETE, cache_lookup)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.set_cache_lookup_url
----------------------------
**syntax:** *ts.http.set_cache_lookup_url()*
**context:** do_global_cache_lookup_complete
**description:** This function can be used to set the cache lookup url for the client request.
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.get_parent_proxy
------------------------
**syntax:** *ts.http.get_parent_proxy()*
**context:** do_global_cache_lookup_complete
**description:** This function can be used to get the parent proxy host and port.
Here is an example
::
function cache_lookup()
ts.http.set_parent_proxy('test1.test.com', 1111)
host, port = ts.http.get_parent_proxy()
ts.debug(host)
ts.debug(port)
end
function do_remap()
ts.hook(TS_LUA_HOOK_CACHE_LOOKUP_COMPLETE, cache_lookup)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.set_parent_proxy
------------------------
**syntax:** *ts.http.set_parent_proxy()*
**context:** do_global_cache_lookup_complete
**description:** This function can be used to set the parent proxy host and name.
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.get_parent_selection_url
--------------------------------
**syntax:** *ts.http.get_parent_selection_url()*
**context:** do_global_cache_lookup_complete
**description:** This function can be used to get the parent selection url for the client request.
Here is an example
::
function cache_lookup()
ts.http.set_parent_selection_url('http://bad.com/bad.html')
local cache = ts.http.get_parent_selection_url()
ts.debug(cache)
end
function do_remap()
ts.hook(TS_LUA_HOOK_CACHE_LOOKUP_COMPLETE, cache_lookup)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.set_parent_selection_url
--------------------------------
**syntax:** *ts.http.set_parent_selection_url()*
**context:** do_global_cache_lookup_complete
**description:** This function can be used to set the parent selection url for the client request.
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.set_server_resp_no_store
--------------------------------
**syntax:** *ts.http.set_server_resp_no_store(status)*
**context:** do_global_read_response
**description:** This function can be used to signal ATS to not store the response in cache
Here is an example:
::
function do_global_read_response()
ts.http.set_server_resp_no_store(1)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.set_resp
----------------
**syntax:** *ts.http.set_resp(CODE, BODY)*
**context:** do_remap or do_global_*
**description:** This function can be used to set response for the client with the CODE status and BODY string.
Here is an example:
::
function do_remap()
ts.http.set_resp(403, "Document access failed :)\n")
return 0
end
We will get the response like this:
::
HTTP/1.1 403 Forbidden
Date: Thu, 20 Mar 2014 06:12:43 GMT
Connection: close
Server: ATS/5.0.0
Cache-Control: no-store
Content-Type: text/html
Content-Language: en
Content-Length: 27
Document access failed :)
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.get_cache_lookup_status
-------------------------------
**syntax:** *ts.http.get_cache_lookup_status()*
**context:** function @ TS_LUA_HOOK_CACHE_LOOKUP_COMPLETE hook point
**description:** This function can be used to get cache lookup status.
Here is an example:
::
function cache_lookup()
local cache_status = ts.http.get_cache_lookup_status()
if cache_status == TS_LUA_CACHE_LOOKUP_HIT_FRESH then
ts.debug('hit')
else
ts.debug('not hit')
end
end
function do_remap()
ts.hook(TS_LUA_HOOK_CACHE_LOOKUP_COMPLETE, cache_lookup)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.set_cache_lookup_status
-------------------------------
**syntax:** *ts.http.set_cache_lookup_status()*
**context:** function after TS_LUA_HOOK_CACHE_LOOKUP_COMPLETE hook point
**description:** This function can be used to set cache lookup status.
Here is an example:
::
function cache_lookup()
local cache_status = ts.http.get_cache_lookup_status()
if cache_status == TS_LUA_CACHE_LOOKUP_HIT_FRESH then
ts.debug('hit')
else
ts.debug('not hit')
end
ts.http.set_cache_lookup_status(TS_LUA_CACHE_LOOKUP_MISS)
end
function do_remap()
ts.hook(TS_LUA_HOOK_CACHE_LOOKUP_COMPLETE, cache_lookup)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
Http cache lookup status constants
----------------------------------
**context:** global
::
TS_LUA_CACHE_LOOKUP_MISS (0)
TS_LUA_CACHE_LOOKUP_HIT_STALE (1)
TS_LUA_CACHE_LOOKUP_HIT_FRESH (2)
TS_LUA_CACHE_LOOKUP_SKIPPED (3)
:ref:`TOP <admin-plugins-ts-lua>`
ts.cached_response.get_status
-----------------------------
**syntax:** *status = ts.cached_response.get_status()*
**context:** function @ TS_LUA_HOOK_CACHE_LOOKUP_COMPLETE hook point or later
**description:** This function can be used to retrieve the status code of the cached response. A Lua number will be
returned.
Here is an example:
::
function cache_lookup()
local cache_status = ts.http.get_cache_lookup_status()
if cache_status == TS_LUA_CACHE_LOOKUP_HIT_FRESH then
code = ts.cached_response.get_status()
ts.debug(code) -- 200
end
end
function do_remap()
ts.hook(TS_LUA_HOOK_CACHE_LOOKUP_COMPLETE, cache_lookup)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.cached_response.get_version
------------------------------
**syntax:** *ver = ts.cached_response.get_version()*
**context:** function @ TS_LUA_HOOK_CACHE_LOOKUP_COMPLETE hook point or later
**description:** Return the http version string of the cached response.
Current possible values are 1.0, 1.1, and 0.9.
:ref:`TOP <admin-plugins-ts-lua>`
ts.cached_response.header.HEADER
--------------------------------
**syntax:** *VALUE = ts.cached_response.header.HEADER*
**syntax:** *VALUE = ts.cached_response.header[HEADER]*
**context:** function @ TS_LUA_HOOK_CACHE_LOOKUP_COMPLETE hook point or later
**description:** get the current cached response's HEADER.
Here is an example:
::
function cache_lookup()
local status = ts.http.get_cache_lookup_status()
if status == TS_LUA_CACHE_LOOKUP_HIT_FRESH then
local ct = ts.cached_response.header['Content-Type']
ts.debug(ct) -- text/plain
end
end
function do_remap()
ts.hook(TS_LUA_HOOK_CACHE_LOOKUP_COMPLETE, cache_lookup)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.cached_response.get_headers
------------------------------
**syntax:** *ts.cached_response.get_headers()*
**context:** function @ TS_LUA_HOOK_CACHE_LOOKUP_COMPLETE hook point or later
**description:** Returns a Lua table holding all the headers for the current cached response.
Here is an example:
::
function cache_lookup()
local status = ts.http.get_cache_lookup_status()
if status == TS_LUA_CACHE_LOOKUP_HIT_FRESH then
hdrs = ts.cached_response.get_headers()
for k, v in pairs(hdrs) do
ts.debug(k..': '..v)
end
end
end
function do_remap()
ts.hook(TS_LUA_HOOK_CACHE_LOOKUP_COMPLETE, cache_lookup)
return 0
end
We will get the output:
::
Connection: keep-alive
Content-Type: text/plain
Date: Thu, 20 Mar 2014 06:12:20 GMT
Cache-Control: max-age=864000
Last-Modified: Sun, 19 May 2013 13:22:01 GMT
Accept-Ranges: bytes
Content-Length: 15
Server: ATS/5.0.0
:ref:`TOP <admin-plugins-ts-lua>`
ts.server_request.get_uri
-------------------------
**syntax:** *ts.server_request.get_uri()*
**context:** function @ TS_LUA_HOOK_SEND_REQUEST_HDR hook point or later
**description:** This function can be used to retrieve the server request's path.
Here is an example:
::
function send_request()
local uri = ts.server_request.get_uri()
ts.debug(uri)
end
function do_remap()
ts.hook(TS_LUA_HOOK_SEND_REQUEST_HDR, send_request)
return 0
end
Then ``GET /am.txt?a=1`` will yield the output:
``/am.txt``
:ref:`TOP <admin-plugins-ts-lua>`
ts.server_request.set_uri
-------------------------
**syntax:** *ts.server_request.set_uri(PATH)*
**context:** function @ TS_LUA_HOOK_SEND_REQUEST_HDR hook point
**description:** This function can be used to override the server request's path.
The PATH argument must be a Lua string and starts with ``/``
:ref:`TOP <admin-plugins-ts-lua>`
ts.server_request.get_uri_args
------------------------------
**syntax:** *ts.server_request.get_uri_args()*
**context:** function @ TS_LUA_HOOK_SEND_REQUEST_HDR hook point or later
**description:** This function can be used to retrieve the server request's query string.
Here is an example:
::
function send_request()
local query = ts.server_request.get_uri_args()
ts.debug(query)
end
function do_remap()
ts.hook(TS_LUA_HOOK_SEND_REQUEST_HDR, send_request)
return 0
end
Then ``GET /st?a=1&b=2`` will yield the output:
``a=1&b=2``
:ref:`TOP <admin-plugins-ts-lua>`
ts.server_request.set_uri_args
------------------------------
**syntax:** *ts.server_request.set_uri_args(QUERY_STRING)*
**context:** function @ TS_LUA_HOOK_SEND_REQUEST_HDR hook point
**description:** This function can be used to override the server request's query string.
::
ts.server_request.set_uri_args('n=6&p=7')
:ref:`TOP <admin-plugins-ts-lua>`
ts.server_request.get_uri_params
--------------------------------
**syntax:** *ts.server_request.get_uri_params()*
**context:** function @ TS_LUA_HOOK_SEND_REQUEST_HDR hook point or later
**description:** This function can be used to retrieve the server request's parameter string.
Here is an example:
::
function send_request()
local query = ts.server_request.get_uri_params()
ts.debug(query)
end
function do_remap()
ts.hook(TS_LUA_HOOK_SEND_REQUEST_HDR, send_request)
return 0
end
Then ``GET /st;a=1`` will yield the output:
``a=1``
:ref:`TOP <admin-plugins-ts-lua>`
ts.server_request.set_uri_params
--------------------------------
**syntax:** *ts.server_request.set_uri_params(PARAMETER_STRING)*
**context:** function @ TS_LUA_HOOK_SEND_REQUEST_HDR hook point
**description:** This function can be used to override the server request's parameter string.
::
ts.server_request.set_uri_params('n=6')
:ref:`TOP <admin-plugins-ts-lua>`
ts.server_request.header.HEADER
-------------------------------
**syntax:** *ts.server_request.header.HEADER = VALUE*
**syntax:** *ts.server_request.header[HEADER] = VALUE*
**syntax:** *VALUE = ts.server_request.header.HEADER*
**context:** function @ TS_LUA_HOOK_SEND_REQUEST_HDR hook point or later
**description:** Set, add to, clear or get the current server request's HEADER.
Here is an example:
::
function send_request()
local ua = ts.server_request.header['User-Agent']
ts.debug(ua)
ts.server_request.header['Accept-Encoding'] = 'gzip'
end
function do_remap()
ts.hook(TS_LUA_HOOK_SEND_REQUEST_HDR, send_request)
return 0
end
Then ``GET /st HTTP/1.1\r\nHost: b.tb.cn\r\nUser-Agent: Mozilla/5.0\r\n...`` will yield the output:
``Mozilla/5.0``
:ref:`TOP <admin-plugins-ts-lua>`
ts.server_request.get_headers
-----------------------------
**syntax:** *ts.server_request.get_headers()*
**context:** function @ TS_LUA_HOOK_SEND_REQUEST_HDR hook point or later
**description:** Returns a Lua table holding all the headers for the current server request.
Here is an example:
::
function send_request()
hdrs = ts.cached_response.get_headers()
for k, v in pairs(hdrs) do
ts.debug(k..': '..v)
end
end
function do_remap()
ts.hook(TS_LUA_HOOK_SEND_REQUEST_HDR, send_request)
return 0
end
We will get the output:
::
Host: b.tb.cn
User-Agent: curl/7.19.7
Accept: */*
:ref:`TOP <admin-plugins-ts-lua>`
ts.server_request.server_addr.set_addr
--------------------------------------
**syntax:** *ts.server_request.server_addr.set_addr()*
**context:** no later than function @ TS_LUA_HOOK_OS_DNS hook point
**description**: This function can be used to set socket address of the origin server.
The ts.server_request.server_addr.set_addr function requires three inputs, ip is a string, port and family is number.
Here is an example:
::
function do_global_read_request()
ts.server_request.server_addr.set_addr("192.168.231.17", 80, TS_LUA_AF_INET)
end
:ref:`TOP <admin-plugins-ts-lua>`
Socket address family
---------------------
**context:** global
::
TS_LUA_AF_INET (2)
TS_LUA_AF_INET6 (10)
:ref:`TOP <admin-plugins-ts-lua>`
ts.server_request.server_addr.get_addr
--------------------------------------
**syntax:** *ts.server_request.server_addr.get_addr()*
**context:** function @ TS_LUA_HOOK_SEND_REQUEST_HDR hook point or later
**description**: This function can be used to get socket address of the origin server.
The ts.server_request.server_addr.get_addr function returns three values, ip is a string, port and family is number.
Here is an example:
::
function do_global_send_request()
ip, port, family = ts.server_request.server_addr.get_addr()
ts.debug(ip) -- 192.168.231.17
ts.debug(port) -- 80
ts.debug(family) -- 2(AF_INET)
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.server_request.server_addr.get_nexthop_addr
----------------------------------------------
**syntax:** *ts.server_request.server_addr.get_nexthop_addr()*
**context:** function @ TS_LUA_HOOK_SEND_REQUEST_HDR hook point or later
**description**: This function can be used to get socket address of the next hop to the origin server.
The ts.server_request.server_addr.get_nexthop_addr function returns three values, ip is a string, port and family is number.
Here is an example:
::
function do_global_send_request()
ip, port, family = ts.server_request.server_addr.get_nexthop_addr()
ts.debug(ip) -- 192.168.231.17
ts.debug(port) -- 80
ts.debug(family) -- 2(AF_INET)
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.server_request.server_addr.get_nexthop_name
----------------------------------------------
**syntax:** *ts.server_request.server_addr.get_nexthop_name()*
**context:** function @ TS_LUA_HOOK_SEND_REQUEST_HDR hook point or later
**description**: This function can be used to get the host name of the next hop to the origin server.
The ts.server_request.server_addr.get_nexthop_name function returns the name as a string.
Here is an example:
::
function do_global_send_request()
name = ts.server_request.server_addr.get_nexthop_name()
print(name) -- test
end
`TOP <#ts-lua-plugin>`_
ts.server_request.server_addr.get_ip
------------------------------------
**syntax:** *ts.server_request.server_addr.get_ip()*
**context:** function @ TS_LUA_HOOK_SEND_REQUEST_HDR hook point or later
**description**: This function can be used to get ip address of the origin server.
The ts.server_request.server_addr.get_ip function returns ip as a string.
Here is an example:
::
function do_global_send_request()
ip = ts.server_request.server_addr.get_ip()
ts.debug(ip) -- 192.168.231.17
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.server_request.server_addr.get_port
--------------------------------------
**syntax:** *ts.server_request.server_addr.get_port()*
**context:** function @ TS_LUA_HOOK_SEND_REQUEST_HDR hook point or later
**description**: This function can be used to get port of the origin server.
The ts.server_request.server_addr.get_port function returns port as number.
Here is an example:
::
function do_global_send_request()
port = ts.server_request.server_addr.get_port()
ts.debug(port) -- 80
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.server_request.server_addr.get_outgoing_port
-----------------------------------------------
**syntax:** *ts.server_request.server_addr.get_outgoing_port()*
**context:** function @ TS_LUA_HOOK_SEND_REQUEST_HDR hook point or later
**description**: This function can be used to get outgoing port to the origin server.
The ts.server_request.server_addr.get_outgoing_port function returns outgoing port as number.
Here is an example:
::
function do_global_send_request()
port = ts.server_request.server_addr.get_outgoing_port()
ts.debug(port) -- 50880
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.server_request.server_addr.set_outgoing_addr
-----------------------------------------------
**syntax:** *ts.server_request.server_addr.set_outgoing_addr()*
**context:** earlier than or inside function @ TS_LUA_HOOK_SEND_REQUEST_HDR hook point
**description**: This function can be used to set outgoing socket address for the request to origin.
The ts.server_request.server_addr.set_outgoing_addr function requires three inputs, ip is a string, port and family is number.
Here is an example:
::
function do_global_send_request()
ts.server_request.server_addr.set_outgoing_addr("192.168.231.17", 80, TS_LUA_AF_INET)
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.server_request.get_url_host
------------------------------
**syntax:** *host = ts.server_request.get_url_host()*
**context:** function @ TS_LUA_HOOK_SEND_REQUEST_HDR hook point
**description:** Return the ``host`` field of the request url.
Here is an example:
::
function send_request()
local url_host = ts.server_request.get_url_host()
ts.debug(url_host)
end
function do_remap()
ts.hook(TS_LUA_HOOK_SEND_REQUEST_HDR, send_request)
return 0
end
Then ``GET http://abc.com/p2/a.txt HTTP/1.1`` will yield the output:
``abc.com``
:ref:`TOP <admin-plugins-ts-lua>`
ts.server_request.set_url_host
------------------------------
**syntax:** *ts.server_request.set_url_host(str)*
**context:** function @ TS_LUA_HOOK_SEND_REQUEST_HDR hook point
**description:** Set ``host`` field of the request url with ``str``. This function is used to change the host name in the GET request to next tier
Here is an example:
::
function send_request()
ts.server_request.set_url_host("")
ts.server_request.set_url_scheme("")
end
function do_remap()
ts.hook(TS_LUA_HOOK_SEND_REQUEST_HDR, send_request)
return 0
end
The GET request like this:
::
+++++++++ Proxy's Request +++++++++
– State Machine Id: 5593
GET http://origin.com/dir1/a.txt HTTP/1.1
User-Agent: curl/7.29.0
Host: abc.com
Accept: /
Client-ip: 135.xx.xx.xx
X-Forwarded-For: 135.xx.xx.xx
Will be changed to:
::
+++++++++ Proxy's Request +++++++++
– State Machine Id: 5593
GET /dir1/a.txt HTTP/1.1
User-Agent: curl/7.29.0
Host: abc.com
Accept: /
Client-ip: 135.xx.xx.xx
X-Forwarded-For: 135.xx.xx.xx
:ref:`TOP <admin-plugins-ts-lua>`
ts.server_request.get_url_scheme
--------------------------------
**syntax:** *scheme = ts.server_request.get_url_scheme()*
**context:** function @ TS_LUA_HOOK_SEND_REQUEST_HDR hook point
**description:** Return the ``scheme`` field of the request url.
Here is an example:
::
function send_request()
local url_scheme = ts.server_request.get_url_scheme()
ts.debug(url_host)
end
function do_remap()
ts.hook(TS_LUA_HOOK_SEND_REQUEST_HDR, send_request)
return 0
end
Then ``GET /liuyurou.txt HTTP/1.1\r\nHost: 192.168.231.129:8080\r\n...`` will yield the output:
``http``
:ref:`TOP <admin-plugins-ts-lua>`
ts.server_request.set_url_scheme
--------------------------------
**syntax:** *ts.server_request.set_url_scheme(str)*
**context:** function @ TS_LUA_HOOK_SEND_REQUEST_HDR hook point
**description:** Set ``scheme`` field of the request url with ``str``. This function is used to change the scheme of the server request.
:ref:`TOP <admin-plugins-ts-lua>`
ts.server_response.get_status
-----------------------------
**syntax:** *status = ts.server_response.get_status()*
**context:** function @ TS_LUA_HOOK_READ_RESPONSE_HDR hook point or later
**description:** This function can be used to retrieve the status code of the origin server's response. A Lua number
will be returned.
Here is an example:
::
function read_response()
local code = ts.server_response.get_status()
ts.debug(code) -- 200
end
function do_remap()
ts.hook(TS_LUA_HOOK_READ_RESPONSE_HDR, read_response)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`'
ts.server_response.set_status
-----------------------------
**syntax:** *ts.server_response.set_status(NUMBER)*
**context:** function @ TS_LUA_HOOK_READ_RESPONSE_HDR hook point
**description:** This function can be used to set the status code of the origin server's response.
Here is an example:
::
function read_response()
ts.server_response.set_status(404)
end
function do_remap()
ts.hook(TS_LUA_HOOK_READ_RESPONSE_HDR, read_response)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`'
ts.server_response.get_version
------------------------------
**syntax:** *ver = ts.server_response.get_version()*
**context:** function @ TS_LUA_HOOK_READ_RESPONSE_HDR hook point or later.
**description:** Return the http version string of the server response.
Current possible values are 1.0, 1.1, and 0.9.
:ref:`TOP <admin-plugins-ts-lua>`
ts.server_response.set_version
------------------------------
**syntax:** *ts.server_response.set_version(VERSION_STR)*
**context:** function @ TS_LUA_HOOK_READ_RESPONSE_HDR hook point
**description:** Set the http version of the server response with the VERSION_STR
::
ts.server_response.set_version('1.0')
:ref:`TOP <admin-plugins-ts-lua>`
ts.server_response.header.HEADER
--------------------------------
**syntax:** *ts.server_response.header.HEADER = VALUE*
**syntax:** *ts.server_response.header[HEADER] = VALUE*
**syntax:** *VALUE = ts.server_response.header.HEADER*
**context:** function @ TS_LUA_HOOK_READ_RESPONSE_HDR hook point or later.
**description:** Set, add to, clear or get the current server response's HEADER.
Here is an example:
::
function read_response()
local ct = ts.server_response.header['Content-Type']
ts.debug(ct)
ts.server_response.header['Cache-Control'] = 'max-age=14400'
end
function do_remap()
ts.hook(TS_LUA_HOOK_READ_RESPONSE_HDR, read_response)
return 0
end
We will get the output:
``text/html``
:ref:`TOP <admin-plugins-ts-lua>`'
ts.server_response.get_headers
------------------------------
**syntax:** *ts.server_response.get_headers()*
**context:** function @ TS_LUA_HOOK_READ_RESPONSE_HDR hook point or later
**description:** Returns a Lua table holding all the headers for the current server response.
Here is an example:
::
function read_response()
hdrs = ts.server_response.get_headers()
for k, v in pairs(hdrs) do
ts.debug(k..': '..v)
end
end
function do_remap()
ts.hook(TS_LUA_HOOK_READ_RESPONSE_HDR, read_response)
return 0
end
We will get the output:
::
Server: nginx/1.5.9
Date: Tue, 18 Mar 2014 10:12:25 GMT
Content-Type: text/html
Content-Length: 555
Last-Modified: Mon, 19 Aug 2013 14:25:55 GMT
Connection: keep-alive
ETag: "52122af3-22b"
Cache-Control: max-age=14400
Accept-Ranges: bytes
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_response.get_status
-----------------------------
**syntax:** *status = ts.client_response.get_status()*
**context:** function @ TS_LUA_HOOK_SEND_RESPONSE_HDR hook point
**description:** This function can be used to retrieve the status code of the response to the client. A Lua number will
be returned.
Here is an example:
::
function send_response()
local code = ts.client_response.get_status()
ts.debug(code) -- 200
end
function do_remap()
ts.hook(TS_LUA_HOOK_SEND_RESPONSE_HDR, send_response)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_response.set_status
-----------------------------
**syntax:** *ts.client_response.set_status(NUMBER)*
**context:** function @ TS_LUA_HOOK_SEND_RESPONSE_HDR hook point
**description:** This function can be used to set the status code of the response to the client.
Here is an example:
::
function send_response()
ts.client_response.set_status(404)
end
function do_remap()
ts.hook(TS_LUA_HOOK_SEND_RESPONSE_HDR, send_response)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_response.get_version
------------------------------
**syntax:** *ver = ts.client_response.get_version()*
**context:** function @ TS_LUA_HOOK_SEND_RESPONSE_HDR hook point.
**description:** Return the http version string of the response to the client.
Current possible values are 1.0, 1.1, and 0.9.
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_response.set_version
------------------------------
**syntax:** *ts.client_response.set_version(VERSION_STR)*
**context:** function @ TS_LUA_HOOK_SEND_RESPONSE_HDR hook point
**description:** Set the http version of the response to the client with the VERSION_STR
::
ts.client_response.set_version('1.0')
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_response.header.HEADER
--------------------------------
**syntax:** *ts.client_response.header.HEADER = VALUE*
**syntax:** *ts.client_response.header[HEADER] = VALUE*
**syntax:** *VALUE = ts.client_response.header.HEADER*
**context:** function @ TS_LUA_HOOK_SEND_RESPONSE_HDR hook point.
**description:** Set, add to, clear or get the current client response's HEADER.
Here is an example:
::
function send_response()
local ct = ts.client_response.header['Content-Type']
ts.debug(ct)
ts.client_response.header['Cache-Control'] = 'max-age=3600'
end
function do_remap()
ts.hook(TS_LUA_HOOK_SEND_RESPONSE_HDR, send_response)
return 0
end
We will get the output:
``text/html``
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_response.get_headers
------------------------------
**syntax:** *ts.client_response.get_headers()*
**context:** function @ TS_LUA_HOOK_SEND_RESPONSE_HDR hook point.
**description:** Returns a Lua table holding all the headers for the current client response.
Here is an example:
::
function send_response()
hdrs = ts.client_response.get_headers()
for k, v in pairs(hdrs) do
ts.debug(k..': '..v)
end
end
function do_remap()
ts.hook(TS_LUA_HOOK_SEND_RESPONSE_HDR, send_response)
return 0
end
We will get the output:
::
Server: ATS/5.0.0
Date: Tue, 18 Mar 2014 10:12:25 GMT
Content-Type: text/html
Transfer-Encoding: chunked
Last-Modified: Mon, 19 Aug 2013 14:25:55 GMT
Connection: keep-alive
Cache-Control: max-age=14400
Age: 2641
Accept-Ranges: bytes
:ref:`TOP <admin-plugins-ts-lua>`
ts.client_response.set_error_resp
---------------------------------
**syntax:** *ts.client_response.set_error_resp(CODE, BODY)*
**context:** function @ TS_LUA_HOOK_SEND_RESPONSE_HDR hook point.
**description:** This function can be used to set the error response to the client.
With this function we can jump to send error response to the client if exception exists, meanwhile we should return `-1`
from the function where exception raises.
Here is an example:
::
function send_response()
ts.client_response.set_error_resp(404, 'bad luck :(\n')
end
function cache_lookup()
return -1
end
function do_remap()
ts.hook(TS_LUA_HOOK_CACHE_LOOKUP_COMPLETE, cache_lookup)
ts.hook(TS_LUA_HOOK_SEND_RESPONSE_HDR, send_response)
return 0
end
We will get the response like this:
::
HTTP/1.1 404 Not Found
Date: Tue, 18 Mar 2014 11:16:00 GMT
Connection: keep-alive
Server: ATS/5.0.0
Content-Length: 12
bad luck :(
:ref:`TOP <admin-plugins-ts-lua>`
Number constants
----------------------
**context:** global
::
TS_LUA_INT64_MAX (9223372036854775808)
TS_LUA_INT64_MIN (-9223372036854775808L)
These constants are usually used in transform handler.
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.resp_cache_transformed
------------------------------
**syntax:** *ts.http.resp_cache_transformed(BOOL)*
**context:** do_remap/do_os_response or do_global_* or later
**description**: This function can be used to tell trafficserver whether to cache the transformed data.
Here is an example:
::
function upper_transform(data, eos)
return string.upper(data), eos
end
function do_remap()
ts.hook(TS_LUA_RESPONSE_TRANSFORM, upper_transform)
ts.http.resp_cache_transformed(0)
return 0
end
This function is usually called after we hook TS_LUA_RESPONSE_TRANSFORM.
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.resp_cache_untransformed
--------------------------------
**syntax:** *ts.http.resp_cache_untransformed(BOOL)*
**context:** do_remap/do_os_response or do_global_* or later
**description**: This function can be used to tell trafficserver whether to cache the untransformed data.
Here is an example:
::
function upper_transform(data, eos)
return string.upper(data), eos
end
function do_remap()
ts.hook(TS_LUA_RESPONSE_TRANSFORM, upper_transform)
ts.http.resp_cache_untransformed(1)
return 0
end
This function is usually called after we hook TS_LUA_RESPONSE_TRANSFORM.
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.resp_transform.get_upstream_bytes
-----------------------------------------
**syntax:** *ts.http.resp_transform.get_upstream_bytes()*
**context:** transform handler
**description**: This function can be used to retrieve the total bytes to be received from the upstream. If we got
chunked response body from origin server, TS_LUA_INT64_MAX will be returned.
Here is an example:
::
local APPEND_DATA = 'TAIL\n'
function append_transform(data, eos)
if ts.ctx['len_set'] == nil then
local sz = ts.http.resp_transform.get_upstream_bytes()
if sz ~= TS_LUA_INT64_MAX then
ts.http.resp_transform.set_downstream_bytes(sz + string.len(APPEND_DATA))
end
ts.ctx['len_set'] = true
end
if eos == 1 then
return data .. APPEND_DATA, eos
else
return data, eos
end
end
function do_remap()
ts.hook(TS_LUA_RESPONSE_TRANSFORM, append_transform)
ts.http.resp_cache_transformed(0)
ts.http.resp_cache_untransformed(1)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.resp_transform.get_upstream_watermark_bytes
---------------------------------------------------
**syntax:** *ts.http.resp_transform.get_upstream_watermark_bytes()*
**context:** transform handler
**description**: This function can be used to retrieve the current watermark bytes for the upstream transform buffer.
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.resp_transform.set_upstream_watermark_bytes
---------------------------------------------------
**syntax:** *ts.http.resp_transform.set_upstream_watermark_bytes(NUMBER)*
**context:** transform handler
**description**: This function can be used to set the watermark bytes of the upstream transform buffer.
Setting the watermark bytes above 32kb may improve the performance of the transform handler.
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.resp_transform.set_downstream_bytes
-------------------------------------------
**syntax:** *ts.http.resp_transform.set_downstream_bytes(NUMBER)*
**context:** transform handler
**description**: This function can be used to set the total bytes to be sent to the downstream.
Sometimes we want to set Content-Length header in client_response, and this function should be called before any real
data is returned from the transform handler.
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.skip_remapping_set
--------------------------
**syntax:** *ts.http.skip_remapping_set(BOOL)*
**context:** do_global_read_request
**description**: This function can be used to tell trafficserver to skip doing remapping
Here is an example:
::
function do_global_read_request()
ts.http.skip_remapping_set(1);
ts.client_request.header['Host'] = 'www.yahoo.com'
return 0
end
This function is usually called in do_global_read_request function
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.get_client_protocol_stack
---------------------------------
**syntax:** *ts.http.get_client_protocol_stack()*
**context:** do_remap/do_os_response or do_global_* or later
**description:** This function can be used to get client protocol stack information
Here is an example:
::
function do_global_read_request()
local stack = {ts.http.get_client_protocol_stack()}
for k,v in pairs(stack) do
ts.debug(v)
end
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.server_push
-------------------
**syntax:** *ts.http.server_push()*
**context:** do_remap/do_os_response or do_global_* or later
**description:** This function can do http/2 server push for the input url
Here is an example:
::
function do_global_read_request()
ts.http.server_push("https://test.com/test.js")
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.is_websocket
--------------------
**syntax:** *ts.http.is_websocket()*
**context:** do_remap/do_os_response or do_global_* or later
**description:** This function can be used to tell if the transaction is websocket
Here is an example:
::
function do_global_read_request()
local flag = ts.http.is_websocket()
ts.debug(flag)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.get_plugin_tag
----------------------
**syntax:** *ts.http.get_plugin_tag()*
**context:** do_remap/do_os_response or do_global_* or later
**description:** This function can be used to get plugin tag of a transaction
Here is an example:
::
function do_global_read_request()
local tag = ts.http.get_plugin_tag() or ''
ts.debug(tag)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.id
----------
**syntax:** *ts.http.id()*
**context:** do_remap/do_os_response or do_global_* or later
**description:** This function can be used to tell id of a transaction
Here is an example:
::
function do_global_read_request()
local id = ts.http.id()
ts.debug(id)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.ssn_id
--------------
**syntax:** *ts.http.ssn_id()*
**context:** do_remap/do_os_response or do_global_* or later
**description:** This function can be used to tell id of a client session
Here is an example:
::
function do_global_read_request()
local id = ts.http.ssn_id()
ts.debug(id)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.is_internal_request
---------------------------
**syntax:** *ts.http.is_internal_request()*
**context:** do_remap/do_os_response or do_global_* or later
**description:** This function can be used to tell if a request is internal or not
Here is an example:
::
function do_global_read_request()
local internal = ts.http.is_internal_request()
ts.debug(internal)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.is_aborted
------------------
**syntax:** *ts.http.is_aborted()*
**context:** do_remap/do_os_response or do_global_* or later
**description:** This function can be used to tell if a request is aborted or not
Here is an example:
::
function do_global_read_request()
local aborted = ts.http.is_aborted()
ts.debug(aborted)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.transaction_count
-------------------------
**syntax:** *ts.http.transaction_count()*
**context:** do_remap/do_os_response or do_global_* or later
**description:** This function returns the number of transaction in this connection
Here is an example
::
function do_remap()
local count = ts.http.transaction_count()
ts.debug(tostring(count))
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.redirect_url_set
------------------------
**syntax:** *ts.http.redirect_url_set()*
**context:** do_remap/do_os_response or do_global_* or later
**description:** This function sets the redirect url and instructs the transaction to follow the redirection as response
Here is an example
::
function do_global_read_response()
ts.http.redirect_url_set('http://foo.com')
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.get_server_state
------------------------
**syntax:** *ts.http.get_server_state()*
**context:** do_remap/do_os_response or do_global_* or later
**description:** This function returns the current server state
Here is an example
::
function do_os_response()
local result = ts.http.get_server_state()
if result == TS_LUA_SRVSTATE_CONNECTION_ALIVE then
ts.debug('Alive')
end
end
:ref:`TOP <admin-plugins-ts-lua>`
Server state constants
----------------------
**context:** global
::
TS_LUA_SRVSTATE_STATE_UNDEFINED (0)
TS_LUA_SRVSTATE_ACTIVE_TIMEOUT (1)
TS_LUA_SRVSTATE_BAD_INCOMING_RESPONSE (2)
TS_LUA_SRVSTATE_CONNECTION_ALIVE (3)
TS_LUA_SRVSTATE_CONNECTION_CLOSED (4)
TS_LUA_SRVSTATE_CONNECTION_ERROR (5)
TS_LUA_SRVSTATE_INACTIVE_TIMEOUT(6)
TS_LUA_SRVSTATE_OPEN_RAW_ERROR (7)
TS_LUA_SRVSTATE_PARSE_ERROR (8)
TS_LUA_SRVSTATE_TRANSACTION_COMPLETE (9)
TS_LUA_SRVSTATE_PARENT_RETRY (10)
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.get_remap_from_url
--------------------------
**syntax:** *ts.http.get_remap_from_url()*
**context:** do_global_post_remap
**description:** This function can be used to get the *from* URL in the matching line in :file:`remap.config`.
Here is an example
::
function do_global_post_remap()
local from_url = ts.http.get_remap_from_url()
ts.debug(from_url)
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.get_remap_to_url
------------------------
**syntax:** *ts.http.get_remap_to_url()*
**context:** do_global_post_remap
**description:** This function can be used to get the *to* URL in the matching line in :file:`remap.config`.
Here is an example
::
function do_global_post_remap()
local to_url = ts.http.get_remap_to_url()
ts.debug(to_url)
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.get_client_fd
---------------------
**syntax:** *ts.http.get_client_fd()*
**context:** after do_global_read_request
**description:** This function can be used to get the client FD for the transaction.
Here is an example
::
function do_global_read_request()
local fd = ts.http.get_client_fd()
ts.debug(fd)
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.get_server_fd
---------------------
**syntax:** *ts.http.get_server_fd()*
**context:** after do_global_send_request
**description:** This function can be used to get the server (origin) FD for the transaction.
Here is an example
::
function do_global_send_request()
local fd = ts.http.get_server_fd()
ts.debug(fd)
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.add_package_path
-------------------
**syntax:** *ts.add_package_path(lua-style-path-str)*
**context:** init stage of the lua script
**description:** Adds the Lua module search path used by scripts.
The path string is in standard Lua path form.
Here is an example:
::
ts.add_package_path('/home/a/test/lua/pac/?.lua')
local nt = require("nt")
function do_remap()
ts.debug(nt.t9(7979))
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.add_package_cpath
--------------------
**syntax:** *ts.add_package_cpath(lua-style-cpath-str)*
**context:** init stage of the lua script
**description:** Adds the Lua C-module search path used by scripts.
The cpath string is in standard Lua cpath form.
Here is an example:
::
ts.add_package_cpath('/home/a/test/c/module/?.so')
local ma = require("ma")
function do_remap()
ts.debug(ma.ft())
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.md5
------
**syntax:** *digest = ts.md5(str)*
**context:** global
**description:** Returns the hexadecimal representation of the MD5 digest of the ``str`` argument.
Here is an example:
::
function do_remap()
uri = ts.client_request.get_uri()
ts.debug(uri) -- /foo
ts.debug(ts.md5(uri)) -- 1effb2475fcfba4f9e8b8a1dbc8f3caf
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.md5_bin
----------
**syntax:** *digest = ts.md5_bin(str)*
**context:** global
**description:** Returns the binary form of the MD5 digest of the ``str`` argument.
Here is an example:
::
function do_remap()
uri = ts.client_request.get_uri()
bin = ts.md5_bin(uri)
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.sha1
-------
**syntax:** *digest = ts.sha1(str)*
**context:** global
**description:** Returns the hexadecimal representation of the SHA-1 digest of the ``str`` argument.
Here is an example:
::
function do_remap()
uri = ts.client_request.get_uri()
ts.debug(uri) -- /foo
ts.debug(ts.sha1(uri)) -- 6dbd548cc03e44b8b44b6e68e56255ce4273ae49
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.sha1_bin
-----------
**syntax:** *digest = ts.sha1_bin(str)*
**context:** global
**description:** Returns the binary form of the SHA-1 digest of the ``str`` argument.
Here is an example:
::
function do_remap()
uri = ts.client_request.get_uri()
bin = ts.sha1_bin(uri)
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.base64_encode
----------------
**syntax:** *value = ts.base64_encode(str)*
**context:** global
**description:** Returns the base64 encoding of the ``str`` argument.
Here is an example:
::
function do_remap()
uri = ts.client_request.get_uri()
value = ts.base64_encode(uri)
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.base64_decode
----------------
**syntax:** *value = ts.base64_decode(str)*
**context:** global
**description:** Returns the base64 decoding of the ``str`` argument.
Here is an example:
::
function do_remap()
uri = ts.client_request.get_uri()
encoded_value = ts.base64_encode(uri)
decoded_value = ts.base64_decode(encoded_value)
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.escape_uri
-------------
**syntax:** *value = ts.escape_uri(str)*
**context:** global
**description:** Returns the uri-escaped value of the ``str`` argument.
Here is an example:
::
function do_remap()
test = '/some value/'
value = ts.escape_uri(test)
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.unescape_uri
---------------
**syntax:** *value = ts.unescape_uri(str)*
**context:** global
**description:** Returns the uri-unescaped value of the ``str`` argument.
Here is an example:
::
function do_remap()
test = '/some value/'
escaped_value = ts.escape_uri(test)
unescaped_value = ts.unescape_uri(escaped_value)
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.fetch
-----------
**syntax:** *res = ts.fetch(url, table?)*
**context:** hook point functions added after do_remap
**description:** Issues a synchronous but still non-block http request with the ``url`` and the optional ``table``.
Returns a Lua table with several slots (res.status, res.header, res.body, and res.truncated).
``res.status`` holds the response status code.
``res.header`` holds the response header table.
``res.body`` holds the response body which may be truncated, you need to check res.truncated to see if the data is
truncated.
Here is a basic example:
::
function post_remap()
local url = string.format('http://%s/foo.txt', ts.ctx['host'])
local res = ts.fetch(url)
if res.status == 200 then
ts.debug(res.body)
end
end
function do_remap()
local inner = ts.http.is_internal_request()
if inner ~= 0 then
return 0
end
local host = ts.client_request.header['Host']
ts.ctx['host'] = host
ts.hook(TS_LUA_HOOK_POST_REMAP, post_remap)
end
We can set the optional table with several members:
``header`` holds the request header table.
``method`` holds the request method. The default method is 'GET'.
``cliaddr`` holds the request client address in ip:port form. The default cliaddr is '127.0.0.1:33333'
Issuing a post request:
::
res = ts.fetch('http://xx.com/foo', {method = 'POST', body = 'hello world'})
:ref:`TOP <admin-plugins-ts-lua>`
ts.fetch_multi
--------------
**syntax:** *vec = ts.fetch_multi({{url, table?}, {url, table?}, ...})*
**context:** hook point functions added after do_remap
Just like `ts.fetch`, but supports multiple http requests running in parallel.
This function will fetch all the urls specified by the input table and return a table which contain all the results in
the same order.
Here is an example:
::
local vec = ts.fetch_multi({
{'http://xx.com/slayer'},
{'http://xx.com/am', {cliaddr = '192.168.1.19:35423'}},
{'http://xx.com/naga', {method = 'POST', body = 'hello world'}},
})
for i = 1, #(vec) do
ts.debug(vec[i].status)
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.intercept
-----------------
**syntax:** *ts.http.intercept(FUNCTION, param1?, param2?, ...)*
**context:** do_remap or do_global_*
**description:** Intercepts the client request and processes it in FUNCTION with optional params.
We should construct the response for the client request, and the request will not be processed by other modules, like
hostdb, cache, origin server...
Intercept FUNCTION will be executed in a new lua_thread, so we can delivery optional params from old lua_thread to new
lua_thread if needed.
Here is an example:
::
require 'os'
function send_data(dstr)
local nt = os.time()..' Zheng.\n'
local resp = 'HTTP/1.0 200 OK\r\n' ..
'Server: ATS/3.2.0\r\n' ..
'Content-Type: text/plain\r\n' ..
'Content-Length: ' .. string.format('%d', string.len(nt)) .. '\r\n' ..
'Last-Modified: ' .. os.date("%a, %d %b %Y %H:%M:%S GMT", os.time()) .. '\r\n' ..
'Connection: keep-alive\r\n' ..
'Cache-Control: max-age=7200\r\n' ..
'Accept-Ranges: bytes\r\n\r\n' ..
nt
ts.debug(dstr)
ts.say(resp)
end
function do_remap()
ts.http.intercept(send_data, 'hello world')
return 0
end
Then we will get the response like this:
::
HTTP/1.1 200 OK
Server: ATS/5.0.0
Content-Type: text/plain
Content-Length: 18
Last-Modified: Tue, 18 Mar 2014 08:23:12 GMT
Cache-Control: max-age=7200
Accept-Ranges: bytes
Date: Tue, 18 Mar 2014 12:23:12 GMT
Age: 0
Connection: keep-alive
1395145392 Zheng.
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.server_intercept
------------------------
**syntax:** *ts.http.server_intercept(FUNCTION, param1?, param2?, ...)*
**context:** do_remap or do_global_*
**description:** Intercepts the server request and acts as the origin server.
Just like ts.http.intercept, but this function will intercept the server request, and we can acts as the origin server
in `FUNCTION`.
Here is an example:
::
require 'os'
function process_combo(host)
local url1 = string.format('http://%s/css/1.css', host)
local url2 = string.format('http://%s/css/2.css', host)
local url3 = string.format('http://%s/css/3.css', host)
local hdr = {
['Host'] = host,
['User-Agent'] = 'blur blur',
}
local ct = {
header = hdr,
method = 'GET'
}
local arr = ts.fetch_multi(
{
{url1, ct},
{url2, ct},
{url3, ct},
})
local ctype = arr[1].header['Content-Type']
local body = arr[1].body .. arr[2].body .. arr[3].body
local resp = 'HTTP/1.1 200 OK\r\n' ..
'Server: ATS/5.2.0\r\n' ..
'Last-Modified: ' .. os.date("%a, %d %b %Y %H:%M:%S GMT", os.time()) .. '\r\n' ..
'Cache-Control: max-age=7200\r\n' ..
'Accept-Ranges: bytes\r\n' ..
'Content-Type: ' .. ctype .. '\r\n' ..
'Content-Length: ' .. string.format('%d', string.len(body)) .. '\r\n\r\n' ..
body
ts.say(resp)
end
function do_remap()
local inner = ts.http.is_internal_request()
if inner ~= 0 then
return 0
end
local h = ts.client_request.header['Host']
ts.http.server_intercept(process_combo, h)
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.say
------
**syntax:** *ts.say(data)*
**context:** *intercept or server_intercept*
**description:** Write response to ATS within intercept or server_intercept.
:ref:`TOP <admin-plugins-ts-lua>`
ts.flush
--------
**syntax:** *ts.flush()*
**context:** *intercept or server_intercept*
**description:** Flushes the output to ATS within intercept or server_intercept.
In synchronous mode, the function will not return until all output data has been written into the system send buffer.
Note that using the Lua coroutine mechanism means that this function does not block the ATS event loop even in the
synchronous mode.
Here is an example:
::
require 'os'
function send_data()
ss = 'wo ai yu ye hua\n'
local resp = 'HTTP/1.0 200 OK\r\n' ..
'Server: ATS/3.2.0\r\n' ..
'Content-Type: text/plain\r\n' ..
'Content-Length: ' .. string.format('%d', 5*string.len(ss)) .. '\r\n' ..
'Last-Modified: ' .. os.date("%a, %d %b %Y %H:%M:%S GMT", os.time()) .. '\r\n' ..
'Connection: keep-alive\r\n' ..
'Cache-Control: max-age=7200\r\n' ..
'Accept-Ranges: bytes\r\n\r\n'
ts.say(resp)
for i=1, 5 do
ts.say(ss)
ts.flush()
end
end
function do_remap()
ts.http.intercept(send_data)
return 0
end
We will get the response like this:
::
HTTP/1.1 200 OK
Server: ATS/5.0.0
Content-Type: text/plain
Content-Length: 80
Last-Modified: Tue, 18 Mar 2014 08:38:29 GMT
Cache-Control: max-age=7200
Accept-Ranges: bytes
Date: Tue, 18 Mar 2014 12:38:29 GMT
Age: 0
Connection: keep-alive
wo ai yu ye hua
wo ai yu ye hua
wo ai yu ye hua
wo ai yu ye hua
wo ai yu ye hua
:ref:`TOP <admin-plugins-ts-lua>`
ts.sleep
--------
**syntax:** *ts.sleep(sec)*
**context:** *hook point functions added after do_remap*
**description:** Sleeps for the specified seconds without blocking.
Behind the scene, this method makes use of the ATS event model.
Here is an example:
::
function send_response()
ts.sleep(3)
end
function read_response()
ts.sleep(3)
end
function do_remap()
ts.hook(TS_LUA_HOOK_READ_RESPONSE_HDR, read_response)
ts.hook(TS_LUA_HOOK_SEND_RESPONSE_HDR, send_response)
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.host_lookup
--------------
**syntax:** *ts.host_lookup(hostname)*
**context:** *hook point functions added after do_remap*
**description:** Look for ip address of the host name without blocking. Nil if address cannot be found.
Behind the scene, this method makes use of the ATS event model.
Here is an example:
::
function send_response()
local result = ts.host_lookup("www.xyz.com") -- ip address of www.xyz.com
end
function do_remap()
ts.hook(TS_LUA_HOOK_SEND_RESPONSE_HDR, send_response)
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.schedule
-----------
**syntax:** *ts.schedule(THREAD_TYPE, sec, FUNCTION, param1?, param2?, ...)*
**context:** *hook point functions added after do_remap*
**description:** Schedule function to be run after specified seconds without blocking.
Behind the scene, this method makes use of the ATS event model.
Here is an example:
::
function schedule()
ts.debug('test schedule starts')
end
function cache_lookup()
ts.debug('cache-lookup')
ts.schedule(TS_LUA_THREAD_POOL_NET, 0, schedule)
return 0
end
function do_remap()
ts.hook(TS_LUA_HOOK_CACHE_LOOKUP_COMPLETE, cache_lookup)
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.config_int_get
----------------------
**syntax:** *val = ts.http.config_int_get(CONFIG)*
**context:** do_remap/do_os_response or do_global_* or later
**description:** Configuration option which has a int value can be retrieved with this function.
::
val = ts.http.config_int_get(TS_LUA_CONFIG_HTTP_CACHE_HTTP)
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.config_int_set
----------------------
**syntax:** *ts.http.config_int_set(CONFIG, NUMBER)*
**context:** do_remap/do_os_response or do_global_* or later
**description:** This function can be used to overwrite the configuration options.
Here is an example:
::
function do_remap()
ts.http.config_int_set(TS_LUA_CONFIG_HTTP_CACHE_HTTP, 0) -- bypass the cache processor
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.config_float_get
------------------------
**syntax:** *val = ts.http.config_float_get(CONFIG)*
**context:** do_remap/do_os_response or do_global_* or later
**description:** Configuration option which has a float value can be retrieved with this function.
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.config_float_set
------------------------
**syntax:** *ts.http.config_float_set(CONFIG, NUMBER)*
**context:** do_remap/do_os_response or do_global_* or later
**description:** This function can be used to overwrite the configuration options.
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.config_string_get
-------------------------
**syntax:** *val = ts.http.config_string_get(CONFIG)*
**context:** do_remap/do_os_response or do_global_* or later
**description:** Configuration option which has a string value can be retrieved with this function.
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.config_string_set
-------------------------
**syntax:** *ts.http.config_string_set(CONFIG, NUMBER)*
**context:** do_remap/do_os_response or do_global_* or later
**description:** This function can be used to overwrite the configuration options.
:ref:`TOP <admin-plugins-ts-lua>`
Http config constants
---------------------
**context:** do_remap/do_os_response or do_global_* or later
::
TS_LUA_CONFIG_URL_REMAP_PRISTINE_HOST_HDR
TS_LUA_CONFIG_HTTP_CHUNKING_ENABLED
TS_LUA_CONFIG_HTTP_NEGATIVE_CACHING_ENABLED
TS_LUA_CONFIG_HTTP_NEGATIVE_CACHING_LIFETIME
TS_LUA_CONFIG_HTTP_CACHE_WHEN_TO_REVALIDATE
TS_LUA_CONFIG_HTTP_KEEP_ALIVE_ENABLED_IN
TS_LUA_CONFIG_HTTP_KEEP_ALIVE_ENABLED_OUT
TS_LUA_CONFIG_HTTP_KEEP_ALIVE_POST_OUT
TS_LUA_CONFIG_HTTP_SERVER_SESSION_SHARING_MATCH
TS_LUA_CONFIG_NET_SOCK_RECV_BUFFER_SIZE_OUT
TS_LUA_CONFIG_NET_SOCK_SEND_BUFFER_SIZE_OUT
TS_LUA_CONFIG_NET_SOCK_OPTION_FLAG_OUT
TS_LUA_CONFIG_HTTP_FORWARD_PROXY_AUTH_TO_PARENT
TS_LUA_CONFIG_HTTP_ANONYMIZE_REMOVE_FROM
TS_LUA_CONFIG_HTTP_ANONYMIZE_REMOVE_REFERER
TS_LUA_CONFIG_HTTP_ANONYMIZE_REMOVE_USER_AGENT
TS_LUA_CONFIG_HTTP_ANONYMIZE_REMOVE_COOKIE
TS_LUA_CONFIG_HTTP_ANONYMIZE_REMOVE_CLIENT_IP
TS_LUA_CONFIG_HTTP_ANONYMIZE_INSERT_CLIENT_IP
TS_LUA_CONFIG_HTTP_RESPONSE_SERVER_ENABLED
TS_LUA_CONFIG_HTTP_INSERT_SQUID_X_FORWARDED_FOR
TS_LUA_CONFIG_HTTP_INSERT_FORWARDED
TS_LUA_CONFIG_HTTP_SEND_HTTP11_REQUESTS
TS_LUA_CONFIG_HTTP_CACHE_HTTP
TS_LUA_CONFIG_HTTP_CACHE_IGNORE_CLIENT_NO_CACHE
TS_LUA_CONFIG_HTTP_CACHE_IGNORE_CLIENT_CC_MAX_AGE
TS_LUA_CONFIG_HTTP_CACHE_IMS_ON_CLIENT_NO_CACHE
TS_LUA_CONFIG_HTTP_CACHE_IGNORE_SERVER_NO_CACHE
TS_LUA_CONFIG_HTTP_CACHE_CACHE_RESPONSES_TO_COOKIES
TS_LUA_CONFIG_HTTP_CACHE_IGNORE_AUTHENTICATION
TS_LUA_CONFIG_HTTP_CACHE_CACHE_URLS_THAT_LOOK_DYNAMIC
TS_LUA_CONFIG_HTTP_CACHE_REQUIRED_HEADERS
TS_LUA_CONFIG_HTTP_INSERT_REQUEST_VIA_STR
TS_LUA_CONFIG_HTTP_INSERT_RESPONSE_VIA_STR
TS_LUA_CONFIG_HTTP_CACHE_HEURISTIC_MIN_LIFETIME
TS_LUA_CONFIG_HTTP_CACHE_HEURISTIC_MAX_LIFETIME
TS_LUA_CONFIG_HTTP_CACHE_GUARANTEED_MIN_LIFETIME
TS_LUA_CONFIG_HTTP_CACHE_GUARANTEED_MAX_LIFETIME
TS_LUA_CONFIG_HTTP_CACHE_MAX_STALE_AGE
TS_LUA_CONFIG_HTTP_KEEP_ALIVE_NO_ACTIVITY_TIMEOUT_IN
TS_LUA_CONFIG_HTTP_KEEP_ALIVE_NO_ACTIVITY_TIMEOUT_OUT
TS_LUA_CONFIG_HTTP_TRANSACTION_NO_ACTIVITY_TIMEOUT_IN
TS_LUA_CONFIG_HTTP_TRANSACTION_NO_ACTIVITY_TIMEOUT_OUT
TS_LUA_CONFIG_HTTP_TRANSACTION_ACTIVE_TIMEOUT_OUT
TS_LUA_CONFIG_HTTP_PER_SERVER_CONNECTION_MAX
TS_LUA_CONFIG_HTTP_PER_SERVER_CONNECTION_MATCH
TS_LUA_CONFIG_HTTP_CONNECT_ATTEMPTS_MAX_RETRIES
TS_LUA_CONFIG_HTTP_CONNECT_ATTEMPTS_MAX_RETRIES_DEAD_SERVER
TS_LUA_CONFIG_HTTP_CONNECT_ATTEMPTS_RR_RETRIES
TS_LUA_CONFIG_HTTP_CONNECT_ATTEMPTS_TIMEOUT
TS_LUA_CONFIG_HTTP_POST_CONNECT_ATTEMPTS_TIMEOUT
TS_LUA_CONFIG_HTTP_DOWN_SERVER_CACHE_TIME
TS_LUA_CONFIG_HTTP_DOWN_SERVER_ABORT_THRESHOLD
TS_LUA_CONFIG_HTTP_DOC_IN_CACHE_SKIP_DNS
TS_LUA_CONFIG_HTTP_BACKGROUND_FILL_ACTIVE_TIMEOUT
TS_LUA_CONFIG_HTTP_RESPONSE_SERVER_STR
TS_LUA_CONFIG_HTTP_CACHE_HEURISTIC_LM_FACTOR
TS_LUA_CONFIG_HTTP_BACKGROUND_FILL_COMPLETED_THRESHOLD
TS_LUA_CONFIG_NET_SOCK_PACKET_MARK_OUT
TS_LUA_CONFIG_NET_SOCK_PACKET_TOS_OUT
TS_LUA_CONFIG_HTTP_INSERT_AGE_IN_RESPONSE
TS_LUA_CONFIG_HTTP_CHUNKING_SIZE
TS_LUA_CONFIG_HTTP_FLOW_CONTROL_ENABLED
TS_LUA_CONFIG_HTTP_FLOW_CONTROL_LOW_WATER_MARK
TS_LUA_CONFIG_HTTP_FLOW_CONTROL_HIGH_WATER_MARK
TS_LUA_CONFIG_HTTP_CACHE_RANGE_LOOKUP
TS_LUA_CONFIG_HTTP_NORMALIZE_AE
TS_LUA_CONFIG_HTTP_DEFAULT_BUFFER_SIZE
TS_LUA_CONFIG_HTTP_DEFAULT_BUFFER_WATER_MARK
TS_LUA_CONFIG_HTTP_REQUEST_HEADER_MAX_SIZE
TS_LUA_CONFIG_HTTP_RESPONSE_HEADER_MAX_SIZE
TS_LUA_CONFIG_HTTP_NEGATIVE_REVALIDATING_ENABLED
TS_LUA_CONFIG_HTTP_NEGATIVE_REVALIDATING_LIFETIME
TS_LUA_CONFIG_SSL_HSTS_MAX_AGE
TS_LUA_CONFIG_SSL_HSTS_INCLUDE_SUBDOMAINS
TS_LUA_CONFIG_HTTP_CACHE_OPEN_READ_RETRY_TIME
TS_LUA_CONFIG_HTTP_CACHE_MAX_OPEN_READ_RETRIES
TS_LUA_CONFIG_HTTP_CACHE_RANGE_WRITE
TS_LUA_CONFIG_HTTP_POST_CHECK_CONTENT_LENGTH_ENABLED
TS_LUA_CONFIG_HTTP_GLOBAL_USER_AGENT_HEADER
TS_LUA_CONFIG_HTTP_AUTH_SERVER_SESSION_PRIVATE
TS_LUA_CONFIG_HTTP_SLOW_LOG_THRESHOLD
TS_LUA_CONFIG_HTTP_CACHE_GENERATION
TS_LUA_CONFIG_BODY_FACTORY_TEMPLATE_BASE
TS_LUA_CONFIG_HTTP_CACHE_OPEN_WRITE_FAIL_ACTION
TS_LUA_CONFIG_HTTP_NUMBER_OF_REDIRECTIONS
TS_LUA_CONFIG_HTTP_CACHE_MAX_OPEN_WRITE_RETRIES
TS_LUA_CONFIG_HTTP_REDIRECT_USE_ORIG_CACHE_KEY
TS_LUA_CONFIG_HTTP_ATTACH_SERVER_SESSION_TO_CLIENT
TS_LUA_CONFIG_WEBSOCKET_NO_ACTIVITY_TIMEOUT
TS_LUA_CONFIG_WEBSOCKET_ACTIVE_TIMEOUT
TS_LUA_CONFIG_HTTP_UNCACHEABLE_REQUESTS_BYPASS_PARENT
TS_LUA_CONFIG_HTTP_PARENT_PROXY_TOTAL_CONNECT_ATTEMPTS
TS_LUA_CONFIG_HTTP_TRANSACTION_ACTIVE_TIMEOUT_IN
TS_LUA_CONFIG_SRV_ENABLED
TS_LUA_CONFIG_HTTP_FORWARD_CONNECT_METHOD
TS_LUA_CONFIG_SSL_CERT_FILENAME
TS_LUA_CONFIG_SSL_CERT_FILEPATH
TS_LUA_CONFIG_PARENT_FAILURES_UPDATE_HOSTDB
TS_LUA_CONFIG_HTTP_CACHE_IGNORE_ACCEPT_MISMATCH
TS_LUA_CONFIG_HTTP_CACHE_IGNORE_ACCEPT_LANGUAGE_MISMATCH
TS_LUA_CONFIG_HTTP_CACHE_IGNORE_ACCEPT_ENCODING_MISMATCH
TS_LUA_CONFIG_HTTP_CACHE_IGNORE_ACCEPT_CHARSET_MISMATCH
TS_LUA_CONFIG_HTTP_PARENT_PROXY_FAIL_THRESHOLD
TS_LUA_CONFIG_HTTP_PARENT_PROXY_RETRY_TIME
TS_LUA_CONFIG_HTTP_PER_PARENT_CONNECT_ATTEMPTS
TS_LUA_CONFIG_HTTP_PARENT_CONNECT_ATTEMPT_TIMEOUT
TS_LUA_CONFIG_HTTP_ALLOW_MULTI_RANGE
TS_LUA_CONFIG_HTTP_REQUEST_BUFFER_ENABLED
TS_LUA_CONFIG_HTTP_ALLOW_HALF_OPEN
TS_LUA_CONFIG_SSL_CLIENT_VERIFY_SERVER
TS_LUA_CONFIG_SSL_CLIENT_VERIFY_SERVER_POLICY
TS_LUA_CONFIG_SSL_CLIENT_VERIFY_SERVER_PROPERTIES
TS_LUA_CONFIG_SSL_CLIENT_SNI_POLICY
TS_LUA_CONFIG_SSL_CLIENT_PRIVATE_KEY_FILENAME
TS_LUA_CONFIG_SSL_CLIENT_CA_CERT_FILENAME
TS_LUA_CONFIG_LAST_ENTRY
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.timeout_set
-------------------
**syntax:** *ts.http.timeout_set(CONFIG, NUMBER)*
**context:** do_remap/do_os_response or do_global_* or later.
**description:** This function can be used to overwrite the timeout settings.
Here is an example:
::
function do_remap()
ts.http.timeout_set(TS_LUA_TIMEOUT_DNS, 30) -- 30 ms
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
Timeout constants
-----------------
**context:** do_remap/do_os_response or do_global_* or later
::
TS_LUA_TIMEOUT_ACTIVE
TS_LUA_TIMEOUT_DNS
TS_LUA_TIMEOUT_CONNECT
TS_LUA_TIMEOUT_NO_ACTIVITY
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.client_packet_mark_set
------------------------------
**syntax:** *ts.http.client_packet_mark_set(NUMBER)*
**context:** do_remap/do_os_response or do_global_* or later.
**description:** This function can be used to set packet mark for client connection.
Here is an example:
::
function do_remap()
ts.http.client_packet_mark_set(0)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.server_packet_mark_set
------------------------------
**syntax:** *ts.http.server_packet_mark_set(NUMBER)*
**context:** do_remap/do_os_response or do_global_* or later.
**description:** This function can be used to set packet mark for server connection.
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.client_packet_tos_set
-----------------------------
**syntax:** *ts.http.client_packet_tos_set(NUMBER)*
**context:** do_remap/do_os_response or do_global_* or later.
**description:** This function can be used to set packet tos for client connection.
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.server_packet_tos_set
-----------------------------
**syntax:** *ts.http.server_packet_tos_set(NUMBER)*
**context:** do_remap/do_os_response or do_global_* or later.
**description:** This function can be used to set packet tos for server connection.
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.client_packet_dscp_set
------------------------------
**syntax:** *ts.http.client_packet_dscp_set(NUMBER)*
**context:** do_remap/do_os_response or do_global_* or later.
**description:** This function can be used to set packet dscp for client connection.
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.server_packet_dscp_set
------------------------------
**syntax:** *ts.http.server_packet_dscp_set(NUMBER)*
**context:** do_remap/do_os_response or do_global_* or later.
**description:** This function can be used to set packet dscp for server connection.
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.enable_redirect
-----------------------
**syntax:** *ts.http.enable_redirect(NUMBER)*
**context:** do_remap/do_os_response or do_global_* or later.
**description:** This function can be used to make transaction follow redirect
Here is an example:
::
function do_remap()
ts.http.enable_redirect(1)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.set_debug
-----------------
**syntax:** *ts.http.set_debug(NUMBER)*
**context:** do_remap/do_os_response or do_global_* or later.
**description:** This function can be used to enable debug log for the transaction
Here is an example:
::
function do_remap()
ts.http.set_debug(1)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.cntl_get
----------------
**syntax:** *val = ts.http.cntl_get(CNTL_TYPE)*
**context:** do_remap/do_os_response or do_global_* or later.
**description:** This function can be used to retrieve the value of control channel.
::
val = ts.http.cntl_get(TS_LUA_HTTP_CNTL_GET_LOGGING_MODE)
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.cntl_set
----------------
**syntax:** *ts.http.cntl_set(CNTL_TYPE, BOOL)*
**context:** do_remap/do_os_response or do_global_* or later.
**description:** This function can be used to set the value of control channel.
Here is an example:
::
function do_remap()
ts.http.cntl_set(TS_LUA_HTTP_CNTL_SET_LOGGING_MODE, 0) -- do not log the request
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
Http control channel constants
------------------------------
**context:** do_remap/do_os_response or do_global_* or later
::
TS_LUA_HTTP_CNTL_GET_LOGGING_MODE
TS_LUA_HTTP_CNTL_SET_LOGGING_MODE
TS_LUA_HTTP_CNTL_GET_INTERCEPT_RETRY_MODE
TS_LUA_HTTP_CNTL_SET_INTERCEPT_RETRY_MODE
:ref:`TOP <admin-plugins-ts-lua>`
ts.http.milestone_get
---------------------
**syntax:** *val = ts.http.milestone_get(MILESTONE_TYPE)*
**context:** do_remap/do_os_response or do_global_* or later.
**description:** This function can be used to retrieve the various milestone times. They are how long the
transaction took to traverse portions of the HTTP state machine. Each milestone value is a fractional number
of seconds since the beginning of the transaction.
::
val = ts.http.milestone_get(TS_LUA_MILESTONE_SM_START)
:ref:`TOP <admin-plugins-ts-lua>`
Milestone constants
------------------------------
**context:** do_remap/do_os_response or do_global_* or later
::
TS_LUA_MILESTONE_UA_BEGIN
TS_LUA_MILESTONE_UA_FIRST_READ
TS_LUA_MILESTONE_UA_READ_HEADER_DONE
TS_LUA_MILESTONE_UA_BEGIN_WRITE
TS_LUA_MILESTONE_UA_CLOSE
TS_LUA_MILESTONE_SERVER_FIRST_CONNECT
TS_LUA_MILESTONE_SERVER_CONNECT
TS_LUA_MILESTONE_SERVER_CONNECT_END
TS_LUA_MILESTONE_SERVER_BEGIN_WRITE
TS_LUA_MILESTONE_SERVER_FIRST_READ
TS_LUA_MILESTONE_SERVER_READ_HEADER_DONE
TS_LUA_MILESTONE_SERVER_CLOSE
TS_LUA_MILESTONE_CACHE_OPEN_READ_BEGIN
TS_LUA_MILESTONE_CACHE_OPEN_READ_END
TS_LUA_MILESTONE_CACHE_OPEN_WRITE_BEGIN
TS_LUA_MILESTONE_CACHE_OPEN_WRITE_END
TS_LUA_MILESTONE_DNS_LOOKUP_BEGIN
TS_LUA_MILESTONE_DNS_LOOKUP_END
TS_LUA_MILESTONE_SM_START
TS_LUA_MILESTONE_SM_FINISH
TS_LUA_MILESTONE_PLUGIN_ACTIVE
TS_LUA_MILESTONE_PLUGIN_TOTAL
TS_LUA_MILESTONE_TLS_HANDSHAKE_START
TS_LUA_MILESTONE_TLS_HANDSHAKE_END
:ref:`TOP <admin-plugins-ts-lua>`
ts.mgmt.get_counter
-------------------
**syntax:** *val = ts.mgmt.get_counter(RECORD_NAME)*
**context:** do_remap/do_os_response or do_global_* or later.
**description:** This function can be used to retrieve the record value which has a counter type.
::
n = ts.mgmt.get_counter('proxy.process.http.incoming_requests')
:ref:`TOP <admin-plugins-ts-lua>`
ts.mgmt.get_int
---------------
**syntax:** *val = ts.mgmt.get_int(RECORD_NAME)*
**context:** do_remap/do_os_response or do_global_* or later.
**description:** This function can be used to retrieve the record value which has a int type.
:ref:`TOP <admin-plugins-ts-lua>`
ts.mgmt.get_float
-----------------
**syntax:** *val = ts.mgmt.get_float(RECORD_NAME)*
**context:** do_remap/do_os_response or do_global_* or later.
**description:** This function can be used to retrieve the record value which has a float type.
:ref:`TOP <admin-plugins-ts-lua>`
ts.mgmt.get_string
------------------
**syntax:** *val = ts.mgmt.get_string(RECORD_NAME)*
**context:** do_remap/do_os_response or do_global_* or later.
**description:** This function can be used to retrieve the record value which has a string type.
::
name = ts.mgmt.get_string('proxy.config.product_name')
:ref:`TOP <admin-plugins-ts-lua>`
ts.stat_create
--------------
**syntax:** *val = ts.stat_create(STAT_NAME, RECORDDATA_TYPE, PERSISTENT, SYNC)*
**context:** global
**description:** This function can be used to create a statistics record given the name, data type, persistent
requirement, and sync requirement. A statistics record table will be created with 4 functions to increment,
decrement, get and set the value.
::
stat:increment(value)
stat:decrement(value)
v = stat:get_value()
stat:set_value(value)
Here is an example.
::
local test_stat;
function __init__(args)
test_stat = ts.stat_create("test_stat",
TS_LUA_RECORDDATATYPE_INT,
TS_LUA_STAT_PERSISTENT,
TS_LUA_STAT_SYNC_COUNT)
end
function do_global_read_request()
local value = test_stat:get_value()
ts.debug(value)
test_stat:increment(1)
return 0
end
:ref:`TOP <admin-plugins-ts-lua>`
ts.stat_find
------------
**syntax:** *val = ts.stat_find(STAT_NAME)*
**context:** global
**description:** This function can be used to find a statistics record given the name. A statistics record table will
be returned with 4 functions to increment, decrement, get and set the value. That is similar to ts.stat_create()
:ref:`TOP <admin-plugins-ts-lua>`
Todo
====
* ts.cache_xxx
* protocol
Currently when we use this as a global plugin, each global hook is using a separate lua state for the same
transaction. This can be wasteful. Also the state cannot be reused for the same transaction across the global hooks. The
alternative will be to use a TXN_START hook to create a lua state first and then add each global hook in the lua script
as transaction hook instead. But this will have problem down the road when we need to have multiple plugins to work
together in some proper orderings. In the future, we should consider different approach, such as creating and
maintaining the lua state in the ATS core.
:ref:`TOP <admin-plugins-ts-lua>`
Notes on Unit Testing Lua scripts for ATS Lua Plugin
====================================================
Follow the steps below to use busted framework to run some unit tests on sample scripts and modules
* Build and install lua 5.1.5 using the source code from here - http://www.lua.org/ftp/lua-5.1.tar.gz
* Build and install luarocks 2.2.2 from here - https://github.com/keplerproject/luarocks/wiki/Download
* Run "sudo luarocks install busted"
* Run "sudo luarocks install luacov"
* "cd trafficserver/plugins/lua/ci"
* Run "busted -c module_test.lua; luacov". It will produce "luacov.report.out" containing the code coverage for "module.lua"
* Run "busted -c script_test.lua; luacov". It will produce "luacov.report.out" containing the code coverage for "script.lua"
Reference for further information
* Busted - http://olivinelabs.com/busted/
* Specifications for asserts/mocks/stubs/etc inside busted framework:
https://github.com/Olivine-Labs/luassert/tree/master/spec
* luacov - https://luarocks.org/modules/hisham/luacov
:ref:`TOP <admin-plugins-ts-lua>`
More docs
=========
* https://github.com/portl4t/ts-lua
:ref:`TOP <admin-plugins-ts-lua>`