| # |
| # |
| # socks.config format: |
| # File consists of several lines. Each line can be a maximum of 400 |
| # chars. |
| # |
| # We will not use SOCKS for addresses specified using no_socks. |
| # Any line whose first string is "no_socks" must be of the following |
| # format: |
| # no_socks <comma separated list of IPADDRESS and/or IPADDRESS_RANGE> |
| # IPADDRESS is x1.x2.x3.x4 |
| # IPADDRESS_RANGE is x1.x2.x3.x4 - y1.y2.y3.y4 |
| # |
| |
| no_socks 123.14.15.1 - 123.14.17.4, 113.14.18.2 |
| no_socks 123.14.30.1 - 123.14.63.4, 122.43.15.2 |
| no_socks 123.14.84.1 - 123.14.89.4, 109.32.15.2 |
| |
| # |
| # Authentication for SOCKS 5 |
| # We currently support Username/Password authentication |
| # Format for username/password used by traffic_server when it connects to |
| # the SOCKS server: |
| # auth u <user_name> <password> |
| # The letter u says it is of type username/password. |
| # e.g: |
| # auth u traffic_server inktomi |
| # |
| # specifying multiple parents based on ip addresses |
| # |
| # specification is same as for parents (see parent.config and documentation |
| # for parent.config). |
| # The main differences: |
| # This supports only "dest_ip" as the primary specifier |
| # This supports only "parent" and "round_robin" as the secondary specifiers |
| # |
| # examples: |
| # |
| # The following rule uses internal.example.com:1080 as the socks server all |
| # destination addresses between 10.0.0.0 and 10.255.255.255 |
| # |
| # dest_ip=10.0.0.0-10.255.255.255 parent="internal.example.com:1080" |
| # |
| # The following uses socks1 (at port 4080) and socks2 (at port 1080) alternately |
| # (round-robin). |
| # |
| # dest_ip=216.32.0.0-216.32.255.255 parent="socks1:4080; socks2:1080" round_robin=strict |
| # |
| ######################################################################################## |