webapps/docs/config/cluster.xml - tomcat80 - Git at Google

 <?xml version="1.0" encoding="UTF-8"?>
 <!--
   Licensed to the Apache Software Foundation (ASF) under one or more
   contributor license agreements.  See the NOTICE file distributed with
   this work for additional information regarding copyright ownership.
   The ASF licenses this file to You under the Apache License, Version 2.0
   (the "License"); you may not use this file except in compliance with
   the License.  You may obtain a copy of the License at

       http://www.apache.org/licenses/LICENSE-2.0

   Unless required by applicable law or agreed to in writing, software
   distributed under the License is distributed on an "AS IS" BASIS,
   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
   See the License for the specific language governing permissions and
   limitations under the License.
 -->
 <!DOCTYPE document [
   <!ENTITY project SYSTEM "project.xml">
 ]>
 <document url="cluster.html">

   &project;

   <properties>
     <author email="fhanik@apache.org">Filip Hanik</author>
     <title>The Cluster object</title>
   </properties>

 <body>

 <section name="Table of Contents">
 <toc/>
 </section>

 <section name="Introduction">
   <p>
   The tomcat cluster implementation provides session replication, context attribute replication and
   cluster wide WAR file deployment.
   While the <code>Cluster</code> configuration is fairly complex, the default configuration will work
   for most people out of the box. </p><p>
   The Tomcat Cluster implementation is very extensible, and hence we have exposed a myriad of options,
   making the configuration seem like a lot, but don't lose faith, instead you have a tremendous control
   over what is going on.</p>
 </section>
 <section name="Security">

 <p>The cluster implementation is written on the basis that a secure, trusted
 network is used for all of the cluster related network traffic. It is not safe
 to run a cluster on a insecure, untrusted network.</p>

 <p>There are many options for providing a secure, trusted network for use by a
 Tomcat cluster. These include:</p>
 <ul>
   <li>private LAN</li>
   <li>a Virtual Private Network (VPN)</li>
   <li>IPSEC</li>
 </ul>

 </section>
 <section name="Engine vs Host placement">
   <p>
    You can place the <code>&lt;Cluster&gt;</code> element inside either the <code>&lt;Engine&gt;</code>
    container or the <code>&lt;Host&gt;</code> container.<br/>
    Placing it in the engine, means that you will support clustering in all virtual hosts of Tomcat,
    and share the messaging component. When you place the <code>&lt;Cluster&gt;</code> inside the <code>&lt;Engine&gt;</code>
    element, the cluster will append the host name of each session manager to the managers name so that two contexts with
    the same name but sitting inside two different hosts will be distinguishable.
   </p>
 </section>
 <section name="Context Attribute Replication">
   <p>To configure context attribute replication, simply do this by swapping out the context implementation
   used for your application context.</p>
   <source>&lt;Context className=&quot;org.apache.catalina.ha.context.ReplicatedContext&quot;/&gt;</source>
   <p>
     This context extends the Tomcat <code><a href="context.html">StandardContext</a></code>
     so all the options from the <a href="context.html">base implementation</a> are valid.
   </p>
 </section>
 <section name="Nested Components">
   <p><b><a href="cluster-manager.html">Manager</a>:</b> <br/>
     The session manager element identifies what kind of session manager is used in this cluster implementation.
     This manager configuration is identical to the one you would use in a regular <code><a href="context.html#Nested_Components">&lt;Context&gt;</a></code> configuration.
     <br/>The default value is the <code>org.apache.catalina.ha.session.DeltaManager</code> that is closely coupled with
     the <code>SimpleTcpCluster</code> implementation. Other managers like the <code>org.apache.catalina.ha.session.BackupManager</code>
     are/could be loosely coupled and don't rely on the <code>SimpleTcpCluster</code> for its data replication.
   </p>
   <p><b><a href="cluster-channel.html">Channel</a>:</b> <br/>
     The Channel and its sub components are all part of the IO layer
     for the cluster group, and is a module in it's own that we have nick named &quot;Tribes&quot;
     <br/>
     Any configuring and tuning of the network layer, the messaging and the membership logic
     will be done in the channel and its nested components.
     You can always find out more about <a href="../tribes/introduction.html">Apache Tribes</a>
   </p>
   <p><b><a href="cluster-valve.html">Valve</a>:</b> <br/>
     The Tomcat Cluster implementation uses <code>Tomcat <a href="valve.html">Valves</a></code> to
     track when requests enter and exit the servlet container. It uses these valves to be able to make
     intelligent decisions on when to replicate data, which is always at the end of a request.
   </p>
   <p><b><a href="cluster-deployer.html">Deployer</a>:</b> <br/>
     The Deployer component is the Tomcat Farm Deployer. It allows you to deploy and undeploy applications
     cluster wide.
   </p>
   <p><b><a href="cluster-listener.html">ClusterListener</a>:</b> <br/>
     ClusterListener's are used to track messages sent and received using the <code>SimpleTcpCluster</code>.
     If you wish to track messages, you can add a listener here, or you can add a valve to the channel object.
   </p>
 </section>

 <section name="Deprecated configuration options">
   <p>
     <b>Deprecated settings:</b> In the previous version of Tomcat you were able to control session
        manager settings using manager.&lt;property&gt;=value.
        This has been discontinued, as the way it was written interferes with
        the ability to support multiple different manager classes under one cluster implementation,
        as the same properties might have the different effect on different managers.
   </p>
 </section>

 <section name="Attributes">
   <subsection name="SimpleTcpCluster Attributes">
   <attributes>
     <attribute name="className" required="true">
       <p>The main cluster class, currently only one is available,
          <code>org.apache.catalina.ha.tcp.SimpleTcpCluster</code>
       </p>
     </attribute>
     <attribute name="channelSendOptions" required="true">
       <p>The Tribes channel send options, default is <code>8</code>.<br/>
          This option is used to set the flag that all messages sent through the
          SimpleTcpCluster uses. The flag decides how the messages are sent, and is a simple logical OR.</p>

       <source>int options = Channel.SEND_OPTIONS_ASYNCHRONOUS |
               Channel.SEND_OPTIONS_SYNCHRONIZED_ACK |
               Channel.SEND_OPTIONS_USE_ACK;</source>
       <p>Some of the values are:<br/>
       <code>Channel.SEND_OPTIONS_SYNCHRONIZED_ACK = 0x0004</code><br/>
       <code>Channel.SEND_OPTIONS_ASYNCHRONOUS = 0x0008</code><br/>
       <code>Channel.SEND_OPTIONS_USE_ACK = 0x0002</code><br/>
       So to use ACK and ASYNC messaging, the flag would be <code>10</code> (8+2)
       <br/>
       Note that if you use ASYNC messaging it is possible for update messages
       for a session to be processed by the receiving nodes in a different order
       to the order in which they were sent.</p>
     </attribute>
     <attribute name="channelStartOptions" required="false">
       <p>Sets the start and stop flags for the &lt;Channel&gt; object used by the cluster.
          The default is <code>Channel.DEFAULT</code> which starts all the channel services, such as
          sender, receiver, multicast sender and multicast receiver.
          The following flags are available today:</p>
          <source>Channel.DEFAULT = Channel.SND_RX_SEQ (1) |
                   Channel.SND_TX_SEQ (2) |
                   Channel.MBR_RX_SEQ (4) |
                   Channel.MBR_TX_SEQ (8);</source>
          <p>To start a channel without multicasting, you would want to use the value <code>Channel.SND_RX_SEQ | Channel.SND_TX_SEQ</code>
          that equals to <code>3</code>.
       </p>
     </attribute>

     <attribute name="heartbeatBackgroundEnabled" required="false">
       <p>Flag whether invoke channel heartbeat at container background thread. Default value is false.
          Enable this flag don't forget to disable the channel heartbeat thread.
       </p>
     </attribute>

     <attribute name="notifyLifecycleListenerOnFailure" required="false">
       <p>Flag whether notify LifecycleListeners if all ClusterListener couldn't accept channel message.
          Default value is false.
       </p>
     </attribute>
   </attributes>
   </subsection>
 </section>
 </body>
 </document>
	<?xml version="1.0" encoding="UTF-8"?>
	<!--
	Licensed to the Apache Software Foundation (ASF) under one or more
	contributor license agreements. See the NOTICE file distributed with
	this work for additional information regarding copyright ownership.
	The ASF licenses this file to You under the Apache License, Version 2.0
	(the "License"); you may not use this file except in compliance with
	the License. You may obtain a copy of the License at

	http://www.apache.org/licenses/LICENSE-2.0

	Unless required by applicable law or agreed to in writing, software
	distributed under the License is distributed on an "AS IS" BASIS,
	WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	See the License for the specific language governing permissions and
	limitations under the License.
	-->
	<!DOCTYPE document [
	<!ENTITY project SYSTEM "project.xml">
	]>
	<document url="cluster.html">

	&project;

	<properties>
	<author email="fhanik@apache.org">Filip Hanik</author>
	<title>The Cluster object</title>
	</properties>

	<body>

	<section name="Table of Contents">
	<toc/>
	</section>

	<section name="Introduction">
	<p>
	The tomcat cluster implementation provides session replication, context attribute replication and
	cluster wide WAR file deployment.
	While the <code>Cluster</code> configuration is fairly complex, the default configuration will work
	for most people out of the box. </p><p>
	The Tomcat Cluster implementation is very extensible, and hence we have exposed a myriad of options,
	making the configuration seem like a lot, but don't lose faith, instead you have a tremendous control
	over what is going on.</p>
	</section>
	<section name="Security">

	<p>The cluster implementation is written on the basis that a secure, trusted
	network is used for all of the cluster related network traffic. It is not safe
	to run a cluster on a insecure, untrusted network.</p>

	<p>There are many options for providing a secure, trusted network for use by a
	Tomcat cluster. These include:</p>
	<ul>
	<li>private LAN</li>
	<li>a Virtual Private Network (VPN)</li>
	<li>IPSEC</li>
	</ul>

	</section>
	<section name="Engine vs Host placement">
	<p>
	You can place the <code><Cluster></code> element inside either the <code><Engine></code>
	container or the <code><Host></code> container.<br/>
	Placing it in the engine, means that you will support clustering in all virtual hosts of Tomcat,
	and share the messaging component. When you place the <code><Cluster></code> inside the <code><Engine></code>
	element, the cluster will append the host name of each session manager to the managers name so that two contexts with
	the same name but sitting inside two different hosts will be distinguishable.
	</p>
	</section>
	<section name="Context Attribute Replication">
	<p>To configure context attribute replication, simply do this by swapping out the context implementation
	used for your application context.</p>
	<source><Context className="org.apache.catalina.ha.context.ReplicatedContext"/></source>
	<p>
	This context extends the Tomcat <code><a href="context.html">StandardContext</a></code>
	so all the options from the <a href="context.html">base implementation</a> are valid.
	</p>
	</section>
	<section name="Nested Components">
	<p><b><a href="cluster-manager.html">Manager</a>:</b> <br/>
	The session manager element identifies what kind of session manager is used in this cluster implementation.
	This manager configuration is identical to the one you would use in a regular <code><a href="context.html#Nested_Components"><Context></a></code> configuration.
	<br/>The default value is the <code>org.apache.catalina.ha.session.DeltaManager</code> that is closely coupled with
	the <code>SimpleTcpCluster</code> implementation. Other managers like the <code>org.apache.catalina.ha.session.BackupManager</code>
	are/could be loosely coupled and don't rely on the <code>SimpleTcpCluster</code> for its data replication.
	</p>
	<p><b><a href="cluster-channel.html">Channel</a>:</b> <br/>
	The Channel and its sub components are all part of the IO layer
	for the cluster group, and is a module in it's own that we have nick named "Tribes"
	<br/>
	Any configuring and tuning of the network layer, the messaging and the membership logic
	will be done in the channel and its nested components.
	You can always find out more about <a href="../tribes/introduction.html">Apache Tribes</a>
	</p>
	<p><b><a href="cluster-valve.html">Valve</a>:</b> <br/>
	The Tomcat Cluster implementation uses <code>Tomcat <a href="valve.html">Valves</a></code> to
	track when requests enter and exit the servlet container. It uses these valves to be able to make
	intelligent decisions on when to replicate data, which is always at the end of a request.
	</p>
	<p><b><a href="cluster-deployer.html">Deployer</a>:</b> <br/>
	The Deployer component is the Tomcat Farm Deployer. It allows you to deploy and undeploy applications
	cluster wide.
	</p>
	<p><b><a href="cluster-listener.html">ClusterListener</a>:</b> <br/>
	ClusterListener's are used to track messages sent and received using the <code>SimpleTcpCluster</code>.
	If you wish to track messages, you can add a listener here, or you can add a valve to the channel object.
	</p>
	</section>

	<section name="Deprecated configuration options">
	<p>
	<b>Deprecated settings:</b> In the previous version of Tomcat you were able to control session
	manager settings using manager.<property>=value.
	This has been discontinued, as the way it was written interferes with
	the ability to support multiple different manager classes under one cluster implementation,
	as the same properties might have the different effect on different managers.
	</p>
	</section>

	<section name="Attributes">
	<subsection name="SimpleTcpCluster Attributes">
	<attributes>
	<attribute name="className" required="true">
	<p>The main cluster class, currently only one is available,
	<code>org.apache.catalina.ha.tcp.SimpleTcpCluster</code>
	</p>
	</attribute>
	<attribute name="channelSendOptions" required="true">
	<p>The Tribes channel send options, default is <code>8</code>.<br/>
	This option is used to set the flag that all messages sent through the
	SimpleTcpCluster uses. The flag decides how the messages are sent, and is a simple logical OR.</p>

	<source>int options = Channel.SEND_OPTIONS_ASYNCHRONOUS \|
	Channel.SEND_OPTIONS_SYNCHRONIZED_ACK \|
	Channel.SEND_OPTIONS_USE_ACK;</source>
	<p>Some of the values are:<br/>
	<code>Channel.SEND_OPTIONS_SYNCHRONIZED_ACK = 0x0004</code><br/>
	<code>Channel.SEND_OPTIONS_ASYNCHRONOUS = 0x0008</code><br/>
	<code>Channel.SEND_OPTIONS_USE_ACK = 0x0002</code><br/>
	So to use ACK and ASYNC messaging, the flag would be <code>10</code> (8+2)
	<br/>
	Note that if you use ASYNC messaging it is possible for update messages
	for a session to be processed by the receiving nodes in a different order
	to the order in which they were sent.</p>
	</attribute>
	<attribute name="channelStartOptions" required="false">
	<p>Sets the start and stop flags for the <Channel> object used by the cluster.
	The default is <code>Channel.DEFAULT</code> which starts all the channel services, such as
	sender, receiver, multicast sender and multicast receiver.
	The following flags are available today:</p>
	<source>Channel.DEFAULT = Channel.SND_RX_SEQ (1) \|
	Channel.SND_TX_SEQ (2) \|
	Channel.MBR_RX_SEQ (4) \|
	Channel.MBR_TX_SEQ (8);</source>
	<p>To start a channel without multicasting, you would want to use the value <code>Channel.SND_RX_SEQ \| Channel.SND_TX_SEQ</code>
	that equals to <code>3</code>.
	</p>
	</attribute>

	<attribute name="heartbeatBackgroundEnabled" required="false">
	<p>Flag whether invoke channel heartbeat at container background thread. Default value is false.
	Enable this flag don't forget to disable the channel heartbeat thread.
	</p>
	</attribute>

	<attribute name="notifyLifecycleListenerOnFailure" required="false">
	<p>Flag whether notify LifecycleListeners if all ClusterListener couldn't accept channel message.
	Default value is false.
	</p>
	</attribute>
	</attributes>
	</subsection>
	</section>
	</body>
	</document>