| <?xml version="1.0" encoding="UTF-8"?> |
| <!-- |
| Licensed to the Apache Software Foundation (ASF) under one or more |
| contributor license agreements. See the NOTICE file distributed with |
| this work for additional information regarding copyright ownership. |
| The ASF licenses this file to You under the Apache License, Version 2.0 |
| (the "License"); you may not use this file except in compliance with |
| the License. You may obtain a copy of the License at |
| |
| http://www.apache.org/licenses/LICENSE-2.0 |
| |
| Unless required by applicable law or agreed to in writing, software |
| distributed under the License is distributed on an "AS IS" BASIS, |
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| See the License for the specific language governing permissions and |
| limitations under the License. |
| --> |
| <!DOCTYPE document [ |
| <!ENTITY project SYSTEM "project.xml"> |
| ]> |
| <document url="host.html"> |
| |
| &project; |
| |
| <properties> |
| <author email="craigmcc@apache.org">Craig R. McClanahan</author> |
| <author email="remm@apache.org">Remy Maucherat</author> |
| <author email="yoavs@apache.org">Yoav Shapira</author> |
| <title>The Host Container</title> |
| </properties> |
| |
| <body> |
| |
| <section name="Table of Contents"> |
| <toc/> |
| </section> |
| |
| <section name="Introduction"> |
| |
| <p>The <strong>Host</strong> element represents a <em>virtual host</em>, |
| which is an association of a network name for a server (such as |
| "www.mycompany.com") with the particular server on which Tomcat is running. |
| For clients to be able to connect to a Tomcat server using its network name, |
| this name must be registered in the <em>Domain Name Service</em> (DNS) server |
| that manages the Internet domain you belong to - contact your Network |
| Administrator for more information.</p> |
| |
| <p>In many cases, System Administrators wish to associate more than |
| one network name (such as <code>www.mycompany.com</code> and |
| <code>company.com</code>) with the same virtual host and applications. |
| This can be accomplished using the <a href="#Host_Name_Aliases">Host |
| Name Aliases</a> feature discussed below.</p> |
| |
| <p>One or more <strong>Host</strong> elements are nested inside an |
| <a href="engine.html">Engine</a> element. Inside the Host element, you |
| can nest <a href="context.html">Context</a> elements for the web |
| applications associated with this virtual host. Exactly one of the Hosts |
| associated with each Engine MUST have a name matching the |
| <code>defaultHost</code> attribute of that Engine.</p> |
| |
| <p>Clients normally use host names to identify the server they wish to connect |
| to. This host name is also included in the HTTP request headers. Tomcat |
| extracts the host name from the HTTP headers and looks for a |
| <strong>Host</strong> with a matching name. If no match is found, the request |
| is routed to the default host. The name of the default host does not have to |
| match a DNS name (although it can) since any request where the DNS name does |
| not match the name of a <strong>Host</strong> element will be routed to the |
| default host.</p> |
| |
| <p><em>The description below uses the variable name $CATALINA_BASE to refer the |
| base directory against which most relative paths are resolved. If you have |
| not configured Tomcat for multiple instances by setting a CATALINA_BASE |
| directory, then $CATALINA_BASE will be set to the value of $CATALINA_HOME, |
| the directory into which you have installed Tomcat.</em></p> |
| |
| </section> |
| |
| |
| <section name="Attributes"> |
| |
| <subsection name="Common Attributes"> |
| |
| <p>All implementations of <strong>Host</strong> |
| support the following attributes:</p> |
| |
| <attributes> |
| |
| <attribute name="appBase" required="true"> |
| <p>The <em>Application Base</em> directory for this virtual host. |
| This is the pathname of a directory that may contain web applications |
| to be deployed on this virtual host. You may specify an |
| absolute pathname, or a pathname that is relative to the |
| <code>$CATALINA_BASE</code> directory. See |
| <a href="#Automatic_Application_Deployment">Automatic Application |
| Deployment</a> for more information on automatic recognition and |
| deployment of web applications. If not specified, the default of |
| <code>webapps</code> will be used.</p> |
| </attribute> |
| |
| <attribute name="xmlBase" required="false"> |
| <p>The <em>XML Base</em> directory for this virtual host. |
| This is the pathname of a directory that may contain context XML |
| descriptors to be deployed on this virtual host. You may specify an |
| absolute pathname for this directory, or a pathname that is relative |
| to the <code>$CATALINA_BASE</code> directory. See |
| <a href="#Automatic_Application_Deployment">Automatic Application |
| Deployment</a> for more information on automatic recognition and |
| deployment of web applications. If not specified the default of |
| <code>conf/<engine_name>/<host_name></code> will be used.</p> |
| </attribute> |
| |
| <attribute name="createDirs" required="false"> |
| <p>If set to true, Tomcat will attempt to create the directories defined |
| by the attributes <code>appBase</code> and <code>xmlBase</code> during |
| the startup phase. The default value is <code>true</code>. If set to |
| true, and directory creation fails, an error message will be printed out |
| but will not halt the startup sequence.</p> |
| </attribute> |
| |
| <attribute name="autoDeploy" required="false"> |
| <p>This flag value indicates if Tomcat should check periodically for new |
| or updated web applications while Tomcat is running. If true, Tomcat |
| periodically checks the <code>appBase</code> and <code>xmlBase</code> |
| directories and deploys any new web applications or context XML |
| descriptors found. Updated web applications or context XML descriptors |
| will trigger a reload of the web application. The flag's value defaults |
| to true. See |
| <a href="#Automatic_Application_Deployment">Automatic Application |
| Deployment</a> for more information.</p> |
| </attribute> |
| |
| <attribute name="backgroundProcessorDelay" required="false"> |
| <p>This value represents the delay in seconds between the |
| invocation of the backgroundProcess method on this host and |
| its child containers, including all contexts. |
| Child containers will not be invoked if their delay value is not |
| negative (which would mean they are using their own processing |
| thread). Setting this to a positive value will cause |
| a thread to be spawn. After waiting the specified amount of time, |
| the thread will invoke the backgroundProcess method on this host |
| and all its child containers. A host will use background processing to |
| perform live web application deployment related tasks. If not |
| specified, the default value for this attribute is -1, which means |
| the host will rely on the background processing thread of its parent |
| engine.</p> |
| </attribute> |
| |
| <attribute name="className" required="false"> |
| <p>Java class name of the implementation to use. This class must |
| implement the <code>org.apache.catalina.Host</code> interface. |
| If not specified, the standard value (defined below) will be used.</p> |
| </attribute> |
| |
| <attribute name="deployIgnore" required="false"> |
| <p>A regular expression defining paths to ignore when |
| <code>autoDeploy</code> and <code>deployOnStartup</code> are set. This |
| allows you to keep your configuration in a version control system, for |
| example, and not deploy a .svn or CVS folder that happens to be in the |
| <code>appBase</code>.</p> |
| <p>This regular expression is relative to <code>appBase</code>. It is |
| also <em>anchored</em>, meaning the match is performed against the |
| entire file/directory name. So, <code>foo</code> matches only a file or |
| directory named <code>foo</code> but not <code>foo.war</code>, |
| <code>foobar</code>, or <code>myfooapp</code>. To match anything with |
| "foo", you could use <code>.*foo.*</code>.</p> |
| <p>See <a href="#Automatic_Application_Deployment">Automatic Application |
| Deployment</a> for more information.</p> |
| </attribute> |
| |
| <attribute name="deployOnStartup" required="false"> |
| <p>This flag value indicates if web applications from this host should |
| be automatically deployed when Tomcat starts. The flag's value defaults |
| to true. See |
| <a href="#Automatic_Application_Deployment">Automatic Application |
| Deployment</a> for more information.</p> |
| </attribute> |
| |
| <attribute name="failCtxIfServletStartFails" required="false"> |
| <p>Set to <code>true</code> to have each child contexts fail its startup |
| if any of its servlet that has load-on-startup >=0 fails its own |
| startup.</p> |
| <p>Each child context may override this attribute.</p> |
| <p>If not specified, the default value of <code>false</code> is |
| used.</p> |
| </attribute> |
| |
| <attribute name="name" required="true"> |
| <p>Usually the network name of this virtual host, as registered in your |
| <em>Domain Name Service</em> server. Regardless of the case used to |
| specify the host name, Tomcat will convert it to lower case internally. |
| One of the Hosts nested within an <a href="engine.html">Engine</a> MUST |
| have a name that matches the <code>defaultHost</code> setting for that |
| Engine. See <a href="#Host_Name_Aliases">Host Name Aliases</a> for |
| information on how to assign more than one network name to the same |
| virtual host.</p> |
| </attribute> |
| |
| <attribute name="startStopThreads" required="false"> |
| <p>The number of threads this <strong>Host</strong> will use to start |
| child <a href="context.html">Context</a> elements in parallel. The same |
| thread pool will be used to deploy new |
| <a href="context.html">Context</a>s if automatic deployment is being |
| used. The special value of 0 will result in the value of |
| <code>Runtime.getRuntime().availableProcessors()</code> being used. |
| Negative values will result in |
| <code>Runtime.getRuntime().availableProcessors() + value</code> being |
| used unless this is less than 1 in which case 1 thread will be used. If |
| not specified, the default value of 1 will be used.</p> |
| </attribute> |
| |
| <attribute name="undeployOldVersions" required="false"> |
| <p>This flag determines if Tomcat, as part of the auto deployment |
| process, will check for old, unused versions of web applications |
| deployed using parallel deployment and, if any are found, remove them. |
| This flag only applies if <code>autoDeploy</code> is true. If not |
| specified the default value of false will be used.</p> |
| </attribute> |
| |
| </attributes> |
| |
| </subsection> |
| |
| |
| <subsection name="Standard Implementation"> |
| |
| <p>The standard implementation of <strong>Host</strong> is |
| <strong>org.apache.catalina.core.StandardHost</strong>. |
| It supports the following additional attributes (in addition to the |
| common attributes listed above):</p> |
| |
| <attributes> |
| |
| <attribute name="copyXML" required="false"> |
| <p>Set to <code>true</code> if you want a context XML descriptor |
| embedded inside the application (located at |
| <code>/META-INF/context.xml</code>) to be copied to <code>xmlBase</code> |
| when the application is deployed. On subsequent starts, the copied |
| context XML descriptor will be used in preference to any context XML |
| descriptor embedded inside the application even if the descriptor |
| embedded inside the application is more recent. The flag's value |
| defaults to <code>false</code>. Note if <strong>deployXML</strong> |
| is <code>false</code>, this attribute will have no effect.</p> |
| </attribute> |
| |
| <attribute name="deployXML" required="false"> |
| <p>Set to <code>false</code> if you want to disable parsing the context |
| XML descriptor embedded inside the application (located at |
| <code>/META-INF/context.xml</code>). Security conscious environments |
| should set this to <code>false</code> to prevent applications from |
| interacting with the container's configuration. The administrator will |
| then be responsible for providing an external context configuration |
| file, and putting it in the location defined by the |
| <strong>xmlBase</strong> attribute. If this flag is <code>false</code>, |
| a descriptor is located at <code>/META-INF/context.xml</code> and no |
| descriptor is present in <strong>xmlBase</strong> then the context will |
| fail to start in case the descriptor contains necessary configuration |
| for secure deployment (such as a RemoteAddrValve) which should not be |
| ignored. The flag's value defaults to <code>true</code> unless a |
| security manager is enabled when the default is <code>false</code>. |
| When running under a security manager this may be enabled on a per web |
| application basis by granting the |
| <code>org.apache.catalina.security.DeployXmlPermission</code> to the web |
| application. The Manager and Host Manager applications are granted this |
| permission by default so that they continue to work when running under a |
| security manager.</p> |
| </attribute> |
| |
| <attribute name="errorReportValveClass" required="false"> |
| <p>Java class name of the error reporting valve which will be used |
| by this Host. The responsibility of this valve is to output error |
| reports. Setting this property allows to customize the look of the |
| error pages which will be generated by Tomcat. This class must |
| implement the |
| <code>org.apache.catalina.Valve</code> interface. If none is specified, |
| the value <code>org.apache.catalina.valves.ErrorReportValve</code> |
| will be used by default.</p> |
| </attribute> |
| |
| <attribute name="unpackWARs" required="false"> |
| <p>Set to <code>true</code> if you want web applications that are |
| placed in the <code>appBase</code> directory as web application |
| archive (WAR) files to be unpacked into a corresponding disk directory |
| structure, <code>false</code> to run such web applications directly |
| from a WAR file. See |
| <a href="#Automatic_Application_Deployment">Automatic Application |
| Deployment</a> for more information.</p> |
| <p>Note: If Tomcat expands the WAR file then it will add a file |
| (<code>/META-INF/war-tracking</code>) to the unpacked directory |
| structure which it uses to detect changes in the WAR file while Tomcat |
| is not running. Any such change will trigger the deletion of the |
| expanded directory and the deployment of the updated WAR file when |
| Tomcat next starts.</p> |
| <p>Note: Running with this option set to <code>false</code> will incur |
| a performance penalty. To avoid a significant performance penalty, the |
| web application should be configured such that class scanning for |
| Servlet 3.0+ pluggability features is not required. Users may also wish |
| to consider the <strong>ExtractingRoot</strong> |
| <a href="resources.html">Resources</a> implementation.</p> |
| </attribute> |
| |
| <attribute name="workDir" required="false"> |
| <p>Pathname to a scratch directory to be used by applications for |
| this Host. Each application will have its own sub directory with |
| temporary read-write use. Configuring a Context workDir will override |
| use of the Host workDir configuration. This directory will be made |
| visible to servlets in the web application by a servlet context |
| attribute (of type <code>java.io.File</code>) named |
| <code>javax.servlet.context.tempdir</code> as described in the |
| Servlet Specification. If not specified, a suitable directory |
| underneath <code>$CATALINA_BASE/work</code> will be provided.</p> |
| </attribute> |
| |
| </attributes> |
| |
| </subsection> |
| |
| |
| </section> |
| |
| |
| <section name="Nested Components"> |
| |
| <p>You can nest one or more <a href="context.html">Context</a> elements |
| inside this <strong>Host</strong> element, each representing a different web |
| application associated with this virtual host.</p> |
| |
| <p>You can nest at most one instance of the following utility components |
| by nesting a corresponding element inside your <strong>Host</strong> |
| element:</p> |
| <ul> |
| <li><a href="realm.html"><strong>Realm</strong></a> - |
| Configure a realm that will allow its |
| database of users, and their associated roles, to be shared across all |
| <a href="context.html">Contexts</a> nested inside this Host (unless |
| overridden by a <a href="realm.html">Realm</a> configuration |
| at a lower level).</li> |
| </ul> |
| |
| </section> |
| |
| |
| <section name="Special Features"> |
| |
| |
| <subsection name="Logging"> |
| |
| <p>A host is associated with the |
| <code>org.apache.catalina.core.ContainerBase.[engine_name].[host_name]</code> |
| log category. Note that the brackets are part of the name, |
| don't omit them.</p> |
| |
| </subsection> |
| |
| |
| <subsection name="Access Logs"> |
| |
| <p>When you run a web server, one of the output files normally generated |
| is an <em>access log</em>, which generates one line of information for |
| each request processed by the server, in a standard format. Catalina |
| includes an optional <a href="valve.html">Valve</a> implementation that |
| can create access logs in the same standard format created by web servers, |
| or in any number of custom formats.</p> |
| |
| <p>You can ask Catalina to create an access log for all requests |
| processed by an <a href="engine.html">Engine</a>, |
| <a href="host.html">Host</a>, or <a href="context.html">Context</a> |
| by nesting a <a href="valve.html">Valve</a> element like this:</p> |
| |
| <source><![CDATA[<Host name="localhost" ...> |
| ... |
| <Valve className="org.apache.catalina.valves.AccessLogValve" |
| prefix="localhost_access_log" suffix=".txt" |
| pattern="common"/> |
| ... |
| </Host>]]></source> |
| |
| <p>See <a href="valve.html#Access_Logging">Access Logging Valves</a> |
| for more information on the configuration attributes that are |
| supported.</p> |
| |
| </subsection> |
| |
| |
| <subsection name="Automatic Application Deployment"> |
| |
| <p>If you are using the standard <strong>Host</strong> implementation with |
| default settings then applications in the <em>appBase</em> or with context |
| files in the <em>configBase</em> are automatically deployed when Tomcat |
| starts (the <code>deployOnStartup</code> property defaults to |
| <code>true</code>) and reloaded or redeployed (as appropriate) when a change |
| is detected while Tomcat is running (the <code>autoDeploy</code> attribute |
| also defaults to <code>true</code>).</p> |
| |
| <p><code>deployOnStartup</code> and <code>autoDeploy</code> trigger |
| execution of exactly the same code so the behaviour is very similar. |
| However, there is one key difference. When Tomcat starts it has no knowledge |
| of which files are the same, which have been changed and which are new. It |
| therefore treats all files as new. While Tomcat is running, it can |
| differentiate between unchanged, modified and new files. This leads to some |
| differences in behaviour between files being modified while Tomcat is |
| running and files being modified while Tomcat is stopped.</p> |
| |
| <p>When you use automatic deployment, related files (a web application may |
| have a context.xml file, a WAR and a directory) that exist in the |
| <strong>Host</strong>'s <em>appBase</em> and/or <em>configBase</em> |
| must conform to the expected <a href="context.html#Naming">naming |
| convention</a>. In short, this means files for the same web application must |
| share the same <em>base name</em>.</p> |
| |
| <p>The automatic deployment process identifies new and/or modified web |
| applications using the following search order:</p> |
| |
| <ol> |
| <li>Web applications with a context.xml file located in the Host's |
| <em>configBase</em>.</li> |
| <li>Web applications with a WAR file located in the Host's |
| <em>appBase</em> that have not already been identified during the scan for |
| context.xml files.</li> |
| <li>Web applications with a directory located in the Host's |
| <em>appBase</em> that have not already been identified during the scans |
| for context.xml and/or WAR files.</li> |
| </ol> |
| |
| <p>When <code>autoDeploy</code> is <code>true</code>, the automatic |
| deployment process will monitor the deployed web applications for changes. |
| Depending on exactly what changes, the web application will either be |
| re-deployed or reloaded. Re-deployment involves the creation of a new web |
| application and, if using the standard session manager, user sessions will |
| not be retained. Reloading uses the existing web application but re-parses |
| the web.xml and reloads any classes. If using the standard session manager, |
| user sessions will be persisted.</p> |
| |
| <p>Users may add to the files that the automatic deployment process monitors |
| for reloading (i.e. any change to one of these files triggers a reload of |
| the web application) by adding a <em>WatchedResources</em> element to the |
| context.xml file. See the |
| <a href="context.html#Nested_Components">Context</a> documentation for |
| further details.</p> |
| |
| <p>When using automatic deployment, the <code>docBase</code> defined by |
| an XML <a href="context.html">Context</a> file should be outside of the |
| <code>appBase</code> directory. If this is not the case, difficulties |
| may be experienced deploying the web application or the application may |
| be deployed twice. The <code>deployIgnore</code> attribute can be used |
| to avoid this situation.</p> |
| |
| <p>Note that if you are defining contexts explicitly in server.xml, you |
| should probably turn off automatic application deployment or specify |
| <code>deployIgnore</code> carefully. Otherwise, the web applications |
| will each be deployed twice, and that may cause problems for the |
| applications.</p> |
| |
| <p>There are many possible combinations of settings, new files, changed |
| files and deleted files. A separate page describes the |
| <a href="automatic-deployment.html">expected behaviour of the automatic |
| deployment process</a> in many of these scenarios.</p> |
| |
| </subsection> |
| |
| |
| <subsection name="Host Name Aliases"> |
| |
| <p>In many server environments, Network Administrators have configured |
| more than one network name (in the <em>Domain Name Service</em> (DNS) |
| server), that resolve to the IP address of the same server. Normally, |
| each such network name would be configured as a separate |
| <strong>Host</strong> element in <code>conf/server.xml</code>, each |
| with its own set of web applications.</p> |
| |
| <p>However, in some circumstances, it is desirable that two or more |
| network names should resolve to the <strong>same</strong> virtual host, |
| running the same set of applications. A common use case for this |
| scenario is a corporate web site, where it is desirable that users |
| be able to utilize either <code>www.mycompany.com</code> or |
| <code>company.com</code> to access exactly the same content and |
| applications.</p> |
| |
| <p>This is accomplished by utilizing one or more <strong>Alias</strong> |
| elements nested inside your <strong>Host</strong> element. For |
| example:</p> |
| <source><![CDATA[<Host name="www.mycompany.com" ...> |
| ... |
| <Alias>mycompany.com</Alias> |
| ... |
| </Host>]]></source> |
| |
| <p>In order for this strategy to be effective, all of the network names |
| involved must be registered in your DNS server to resolve to the |
| same computer that is running this instance of Catalina.</p> |
| |
| </subsection> |
| |
| |
| <subsection name="Lifecycle Listeners"> |
| |
| <p>If you have implemented a Java object that needs to know when this |
| <strong>Host</strong> is started or stopped, you can declare it by |
| nesting a <strong>Listener</strong> element inside this element. The |
| class name you specify must implement the |
| <code>org.apache.catalina.LifecycleListener</code> interface, and |
| it will be notified about the occurrence of the corresponding |
| lifecycle events. Configuration of such a listener looks like this:</p> |
| |
| <source><![CDATA[<Host name="localhost" ...> |
| ... |
| <Listener className="com.mycompany.mypackage.MyListener" ... > |
| ... |
| </Host>]]></source> |
| |
| <p>Note that a Listener can have any number of additional properties |
| that may be configured from this element. Attribute names are matched |
| to corresponding JavaBean property names using the standard property |
| method naming patterns.</p> |
| |
| </subsection> |
| |
| |
| <subsection name="Request Filters"> |
| |
| <p>You can ask Catalina to check the IP address, or host name, on every |
| incoming request directed to the surrounding |
| <a href="engine.html">Engine</a>, <a href="host.html">Host</a>, or |
| <a href="context.html">Context</a> element. The remote address or name |
| will be checked against configured "accept" and/or "deny" |
| filters, which are defined using <code>java.util.regex</code> Regular |
| Expression syntax. Requests that come from locations that are |
| not accepted will be rejected with an HTTP "Forbidden" error. |
| Example filter declarations:</p> |
| |
| <source><![CDATA[<Host name="localhost" ...> |
| ... |
| <Valve className="org.apache.catalina.valves.RemoteHostValve" |
| allow=".*\.mycompany\.com|www\.yourcompany\.com"/> |
| <Valve className="org.apache.catalina.valves.RemoteAddrValve" |
| deny="192\.168\.1\.\d+"/> |
| ... |
| </Host>]]></source> |
| |
| <p>See <a href="valve.html#Remote_Address_Filter">Remote Address Filter</a> |
| and <a href="valve.html#Remote_Host_Filter">Remote Host Filter</a> for |
| more information about the configuration options that are supported.</p> |
| |
| </subsection> |
| |
| |
| <subsection name="Single Sign On"> |
| |
| <p>In many environments, but particularly in portal environments, it |
| is desirable to have a user challenged to authenticate themselves only |
| once over a set of web applications deployed on a particular virtual |
| host. This can be accomplished by nesting an element like this inside |
| the Host element for this virtual host:</p> |
| |
| <source><![CDATA[<Host name="localhost" ...> |
| ... |
| <Valve className="org.apache.catalina.authenticator.SingleSignOn"/> |
| ... |
| </Host>]]></source> |
| |
| <p>The Single Sign On facility operates according to the following rules: |
| </p> |
| <ul> |
| <li>All web applications configured for this virtual host must share the |
| same <a href="realm.html">Realm</a>. In practice, that means you can |
| nest the Realm element inside this Host element (or the surrounding |
| <a href="engine.html">Engine</a> element), but not inside a |
| <a href="context.html">Context</a> element for one of the involved |
| web applications.</li> |
| <li>As long as the user accesses only unprotected resources in any of the |
| web applications on this virtual host, they will not be challenged |
| to authenticate themselves.</li> |
| <li>As soon as the user accesses a protected resource in |
| <strong>any</strong> web application associated with this virtual |
| host, the user will be challenged to authenticate himself or herself, |
| using the login method defined for the web application currently |
| being accessed.</li> |
| <li>Once authenticated, the roles associated with this user will be |
| utilized for access control decisions across <strong>all</strong> |
| of the associated web applications, without challenging the user |
| to authenticate themselves to each application individually.</li> |
| <li>As soon as the user logs out of one web application (for example, |
| by invalidating the corresponding session if form |
| based login is used), the user's sessions in <strong>all</strong> |
| web applications will be invalidated. Any subsequent attempt to |
| access a protected resource in any application will require the |
| user to authenticate himself or herself again.</li> |
| <li>The Single Sign On feature utilizes HTTP cookies to transmit a token |
| that associates each request with the saved user identity, so it can |
| only be utilized in client environments that support cookies.</li> |
| </ul> |
| |
| </subsection> |
| |
| |
| <subsection name="User Web Applications"> |
| |
| <p>Many web servers can automatically map a request URI starting with |
| a tilde character ("~") and a username to a directory (commonly named |
| <code>public_html</code>) in that user's home directory on the server. |
| You can accomplish the same thing in Catalina by using a special |
| <strong>Listener</strong> element like this (on a Unix system that |
| uses the <code>/etc/passwd</code> file to identify valid users):</p> |
| |
| <source><![CDATA[<Host name="localhost" ...> |
| ... |
| <Listener className="org.apache.catalina.startup.UserConfig" |
| directoryName="public_html" |
| userClass="org.apache.catalina.startup.PasswdUserDatabase"/> |
| ... |
| </Host>]]></source> |
| |
| <p>On a server where <code>/etc/passwd</code> is not in use, you can |
| request Catalina to consider all directories found in a specified base |
| directory (such as <code>c:\Homes</code> in this example) to be |
| considered "user home" directories for the purposes of this directive:</p> |
| |
| <source><![CDATA[<Host name="localhost" ...> |
| ... |
| <Listener className="org.apache.catalina.startup.UserConfig" |
| directoryName="public_html" |
| homeBase="c:\Homes" |
| userClass="org.apache.catalina.startup.HomesUserDatabase"/> |
| ... |
| </Host>]]></source> |
| |
| <p>If a user home directory has been set up for a user named |
| <code>craigmcc</code>, then its contents will be visible from a |
| client browser by making a request to a URL like:</p> |
| |
| <source>http://www.mycompany.com:8080/~craigmcc</source> |
| |
| <p>Successful use of this feature requires recognition of the following |
| considerations:</p> |
| <ul> |
| <li>Each user web application will be deployed with characteristics |
| established by the global and host level default context settings.</li> |
| <li>It is legal to include more than one instance of this Listener |
| element. This would only be useful, however, in circumstances |
| where you wanted to configure more than one "homeBase" directory.</li> |
| <li>The operating system username under which Catalina is executed |
| MUST have read access to each user's web application directory, |
| and all of its contents.</li> |
| </ul> |
| |
| </subsection> |
| |
| |
| </section> |
| |
| |
| </body> |
| |
| |
| </document> |