| dnl |
| dnl Copyright 1999-2004 The Apache Software Foundation |
| dnl |
| dnl Licensed under the Apache License, Version 2.0 (the "License"); |
| dnl you may not use this file except in compliance with the License. |
| dnl You may obtain a copy of the License at |
| dnl |
| dnl http://www.apache.org/licenses/LICENSE-2.0 |
| dnl |
| dnl Unless required by applicable law or agreed to in writing, software |
| dnl distributed under the License is distributed on an "AS IS" BASIS, |
| dnl WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| dnl See the License for the specific language governing permissions and |
| dnl limitations under the License. |
| dnl |
| |
| dnl -------------------------------------------------------------------------- |
| dnl Author Henri Gomez <hgomez@apache.org> |
| dnl |
| dnl Inspired by Pier works on webapp m4 macros :) |
| dnl |
| dnl Version $Id$ |
| dnl -------------------------------------------------------------------------- |
| |
| dnl -------------------------------------------------------------------------- |
| dnl JK_APR_THREADS |
| dnl Configure APR threading for use with --with-apr. |
| dnl Result goes into APR_CONFIGURE_ARGS |
| dnl -------------------------------------------------------------------------- |
| AC_DEFUN( |
| [JK_APR_THREADS], |
| [ |
| AC_ARG_ENABLE( |
| [apr-threads], |
| [ --enable-apr-threads Configure APR threading for use with --with-apr ], |
| [ |
| case "${enableval}" in |
| ""|"yes"|"YES"|"true"|"TRUE") |
| APR_CONFIGURE_ARGS="--enable-threads ${APR_CONFIGURE_ARGS}" |
| ;; |
| "no"|"NO"|"false"|"FALSE") |
| APR_CONFIGURE_ARGS="--disable-threads ${APR_CONFIGURE_ARGS}" |
| ;; |
| *) |
| APR_CONFIGURE_ARGS="--enable-threads=${enableval} ${APR_CONFIGURE_ARGS}" |
| esac |
| ]) |
| ]) |
| |
| dnl -------------------------------------------------------------------------- |
| dnl JK_APR |
| dnl Set the APR source dir. |
| dnl $1 => File which should be present |
| dnl -------------------------------------------------------------------------- |
| AC_DEFUN( |
| [JK_APR], |
| [ |
| tempval="" |
| AC_ARG_WITH( |
| [apr], |
| [ --with-apr=DIR Location of APR source dir ], |
| [ |
| case "${withval}" in |
| ""|"yes"|"YES"|"true"|"TRUE") |
| AC_MSG_ERROR(valid apr source dir location required) |
| ;; |
| "no"|"NO"|"false"|"FALSE") |
| AC_MSG_ERROR(valid apr source dir location required) |
| ;; |
| *) |
| tempval="${withval}" |
| |
| if ${TEST} ! -d ${tempval} ; then |
| AC_MSG_ERROR(Not a directory: ${tempval}) |
| fi |
| |
| if ${TEST} ! -f ${tempval}/$1; then |
| AC_MSG_ERROR(can't locate ${tempval}/$1) |
| fi |
| |
| if ${TEST} ! -z "$tempval" ; then |
| APR_BUILD="apr-build" |
| APR_CFLAGS="-I ${tempval}/include" |
| APR_CLEAN="apr-clean" |
| APR_DIR=${tempval} |
| APR_INCDIR="${tempval}/include" |
| AC_MSG_RESULT(configuring apr...) |
| tempret="0" |
| JK_EXEC( |
| [tempret], |
| [${SHELL} ./configure --prefix=${APR_DIR} --with-installbuilddir=${APR_DIR}/instbuild --disable-shared ${APR_CONFIGURE_ARGS}], |
| [apr], |
| [${APR_DIR}]) |
| if ${TEST} "${tempret}" = "0"; then |
| AC_MSG_RESULT(apr configure ok) |
| else |
| AC_MSG_ERROR(apr configure failed with ${tempret}) |
| fi |
| JK_APR_LIBNAME(apr_libname,${APR_DIR}) |
| APR_LDFLAGS="${APR_DIR}/lib/${apr_libname}" |
| APR_LIBDIR="" |
| use_apr=true |
| COMMON_APR_OBJECTS="\${COMMON_APR_OBJECTS}" |
| fi |
| ;; |
| esac |
| ]) |
| |
| unset tempret |
| unset tempval |
| unset apr_libname |
| ]) |
| |
| dnl -------------------------------------------------------------------------- |
| dnl JK_APR_UTIL |
| dnl Set the APR-UTIL source dir. |
| dnl $1 => File which should be present |
| dnl -------------------------------------------------------------------------- |
| AC_DEFUN( |
| [JK_APR_UTIL], |
| [ |
| tempval="" |
| AC_ARG_WITH( |
| [apr-util], |
| [ --with-apr-util=DIR Location of APR-UTIL source dir ], |
| [ |
| case "${withval}" in |
| ""|"yes"|"YES"|"true"|"TRUE") |
| AC_MSG_ERROR(valid apr-util source dir location required) |
| ;; |
| "no"|"NO"|"false"|"FALSE") |
| AC_MSG_ERROR(valid apr-util source dir location required) |
| ;; |
| *) |
| tempval="${withval}" |
| |
| if ${TEST} ! -d ${tempval} ; then |
| AC_MSG_ERROR(Not a directory: ${tempval}) |
| fi |
| |
| if ${TEST} ! -f ${tempval}/$1; then |
| AC_MSG_ERROR(can't locate ${tempval}/$1) |
| fi |
| |
| if ${TEST} -z "${APR_BUILD}"; then |
| AC_MSG_ERROR([--with-apr and --with-apr-util must be used together]) |
| fi |
| |
| if ${TEST} ! -z "$tempval" ; then |
| APR_UTIL_DIR=${tempval} |
| APR_CFLAGS="${APR_CFLAGS} -I ${APR_UTIL_DIR}/include" |
| APR_UTIL_INCDIR="${APR_UTIL_DIR}/include" |
| AC_MSG_RESULT(configuring apr-util...) |
| tempret="0" |
| JK_EXEC( |
| [tempret], |
| [${SHELL} ./configure --prefix=${APR_UTIL_DIR} --with-apr=${APR_DIR}], |
| [apr-util], |
| [${APR_UTIL_DIR}]) |
| if ${TEST} "${tempret}" = "0"; then |
| AC_MSG_RESULT(apr-util configure ok) |
| else |
| AC_MSG_ERROR(apr-util configure failed with ${tempret}) |
| fi |
| JK_APR_UTIL_LIBNAME(apr_util_libname,${APR_UTIL_DIR}) |
| APR_LDFLAGS="${APR_LDFLAGS} ${APR_UTIL_DIR}/lib/${apr_util_libname}" |
| APR_UTIL_LIBDIR="" |
| use_apr=true |
| COMMON_APR_OBJECTS="\${COMMON_APR_OBJECTS}" |
| fi |
| ;; |
| esac |
| ]) |
| |
| unset tempret |
| unset tempval |
| unset apr_util_libname |
| ]) |
| |
| |
| dnl -------------------------------------------------------------------------- |
| dnl JK_APR_INCDIR |
| dnl Set the APR include dir. |
| dnl $1 => File which should be present |
| dnl -------------------------------------------------------------------------- |
| AC_DEFUN( |
| [JK_APR_INCDIR], |
| [ |
| tempval="" |
| AC_ARG_WITH( |
| [apr-include], |
| [ --with-apr-include=DIR Location of APR include dir ], |
| [ |
| case "${withval}" in |
| ""|"yes"|"YES"|"true"|"TRUE") |
| ;; |
| "no"|"NO"|"false"|"FALSE") |
| AC_MSG_ERROR(valid apr include dir location required) |
| ;; |
| *) |
| tempval="${withval}" |
| if ${TEST} ! -d ${tempval} ; then |
| AC_MSG_ERROR(Not a directory: ${tempval}) |
| fi |
| |
| if ${TEST} ! -f ${tempval}/$1; then |
| AC_MSG_ERROR(can't locate ${tempval}/$1) |
| fi |
| |
| if ${TEST} ! -z "$tempval" ; then |
| APR_BUILD="" |
| APR_CFLAGS="-I${tempval}" |
| APR_CLEAN="" |
| APR_DIR="" |
| APR_INCDIR=${tempval} |
| COMMON_APR_OBJECTS="\${COMMON_APR_OBJECTS}" |
| use_apr=true |
| fi |
| ;; |
| |
| esac |
| ]) |
| |
| unset tempval |
| ]) |
| |
| |
| dnl -------------------------------------------------------------------------- |
| dnl JK_APR_LIBDIR |
| dnl Set the APR library dir. |
| dnl -------------------------------------------------------------------------- |
| AC_DEFUN( |
| [JK_APR_LIBDIR], |
| [ |
| tempval="" |
| AC_ARG_WITH( |
| [apr-lib], |
| [ --with-apr-lib=DIR Location of APR lib dir ], |
| [ |
| case "${withval}" in |
| ""|"yes"|"YES"|"true"|"TRUE") |
| ;; |
| "no"|"NO"|"false"|"FALSE") |
| AC_MSG_ERROR(valid apr lib dir location required) |
| ;; |
| *) |
| tempval="${withval}" |
| |
| if ${TEST} ! -d ${tempval} ; then |
| AC_MSG_ERROR(Not a directory: ${tempval}) |
| fi |
| |
| if ${TEST} ! -z "$tempval" ; then |
| APR_BUILD="" |
| APR_CLEAN="" |
| APR_DIR="" |
| APR_LIBDIR=${tempval} |
| APR_LDFLAGS="`apr-config --link-ld` -L${tempval}" |
| COMMON_APR_OBJECTS="\${COMMON_APR_OBJECTS}" |
| use_apr=true |
| fi |
| |
| ;; |
| esac |
| ]) |
| |
| unset tempval |
| ]) |
| |
| |
| dnl -------------------------------------------------------------------------- |
| dnl JK_APR_LIBNAME |
| dnl Retrieve the complete name of the library. |
| dnl $1 => Environment variable name for the returned value |
| dnl $2 => APR sources directory |
| dnl -------------------------------------------------------------------------- |
| AC_DEFUN( |
| [JK_APR_LIBNAME], |
| [ |
| AC_MSG_CHECKING([for apr APR_LIBNAME]) |
| if ${TEST} ! -f "$2/apr-config" ; then |
| AC_MSG_ERROR([cannot find apr-config file in $2]) |
| fi |
| jk_apr_get_tempval=`$2/apr-config --link-libtool 2> /dev/null` |
| if ${TEST} -z "${jk_apr_get_tempval}" ; then |
| AC_MSG_ERROR([$2/apr-config --link-libtool failed]) |
| fi |
| jk_apr_get_tempval=`basename ${jk_apr_get_tempval}` |
| $1="${jk_apr_get_tempval}" |
| AC_MSG_RESULT([${jk_apr_get_tempval}]) |
| unset jk_apr_get_tempval |
| ]) |
| |
| |
| dnl -------------------------------------------------------------------------- |
| dnl JK_APR_UTIL_LIBNAME |
| dnl Retrieve the complete name of the library. |
| dnl $1 => Environment variable name for the returned value |
| dnl $2 => APR_UTIL sources directory |
| dnl -------------------------------------------------------------------------- |
| AC_DEFUN( |
| [JK_APR_UTIL_LIBNAME], |
| [ |
| AC_MSG_CHECKING([for apr-util APR_UTIL_LIBNAME]) |
| if ${TEST} ! -f "$2/apu-config" ; then |
| AC_MSG_ERROR([cannot find apu-config file in $2]) |
| fi |
| jk_apu_get_tempval=`$2/apu-config --link-libtool 2> /dev/null` |
| if ${TEST} -z "${jk_apu_get_tempval}" ; then |
| AC_MSG_ERROR([$2/apu-config --link-libtool failed]) |
| fi |
| jk_apu_get_tempval=`basename ${jk_apu_get_tempval}` |
| $1="${jk_apu_get_tempval}" |
| AC_MSG_RESULT([${jk_apu_get_tempval}]) |
| unset jk_apu_get_tempval |
| ]) |
| |
| dnl vi:set sts=2 sw=2 autoindent: |
| |
