| dnl |
| dnl Licensed to the Apache Software Foundation (ASF) under one or more |
| dnl contributor license agreements. See the NOTICE file distributed with |
| dnl this work for additional information regarding copyright ownership. |
| dnl The ASF licenses this file to You under the Apache License, Version 2.0 |
| dnl (the "License"); you may not use this file except in compliance with |
| dnl the License. You may obtain a copy of the License at |
| dnl |
| dnl http://www.apache.org/licenses/LICENSE-2.0 |
| dnl |
| dnl Unless required by applicable law or agreed to in writing, software |
| dnl distributed under the License is distributed on an "AS IS" BASIS, |
| dnl WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| dnl See the License for the specific language governing permissions and |
| dnl limitations under the License. |
| dnl |
| |
| dnl |
| dnl apache.m4: autoconf macro for Apache/apxs |
| dnl |
| |
| dnl |
| dnl check for apxs. |
| dnl |
| |
| AC_DEFUN(JTC_CHECK_APXS,[ |
| WEBSERVER="" |
| apache_dir="" |
| apache_include="" |
| APXS="apxs" |
| AC_ARG_WITH(apxs, |
| [ --with-apxs[=FILE] Build shared Apache module. FILE is the optional |
| pathname to the apxs tool; defaults to finding |
| apxs in your PATH.], |
| [ |
| case "${withval}" in |
| y | yes | true) find_apxs=true ;; |
| n | no | false) find_apxs=false ;; |
| *) find_apxs=false ;; |
| esac |
| |
| if ${TEST} ${find_apxs} ; then |
| AC_MSG_RESULT([need to check for Perl first, apxs depends on it...]) |
| AC_PATH_PROG(PERL,perl,$PATH)dnl |
| |
| if ${TEST} ${find_apxs} ; then |
| APXS=${withval} |
| else |
| AC_PATH_PROG(APXS,apxs,$PATH)dnl |
| fi |
| |
| if ${TEST} -n "${APXS}" ; then |
| dnl Seems that we have it, but have to check if it is OK first |
| if ${TEST} ! -x "${APXS}" ; then |
| AC_MSG_ERROR(Invalid location for apxs: '${APXS}') |
| fi |
| |
| $APXS -q PREFIX >/dev/null 2>/dev/null || apxs_support=false |
| |
| if ${TEST} "${apxs_support}" = "false" ; then |
| AC_MSG_RESULT(could not find apxs) |
| AC_MSG_ERROR(You must specify a valid --with-apxs path) |
| fi |
| |
| dnl test apache version |
| $RM -rf test |
| $APXS -n test -g |
| APA=`grep STANDARD20 test/mod_test.c` |
| $RM -rf test |
| if ${TEST} -z "$APA" ; then |
| WEBSERVER="apache-1.3" |
| else |
| WEBSERVER="apache-2.0" |
| fi |
| AC_MSG_RESULT([building connector for \"$WEBSERVER\"]) |
| |
| AC_SUBST(APXS) |
| |
| dnl apache_dir and apache_include are also needed. |
| apache_dir=`$APXS -q PREFIX` |
| apache_include="-I`$APXS -q INCLUDEDIR`" |
| fi |
| fi |
| ], |
| [ |
| AC_MSG_RESULT(no apxs given) |
| ]) |
| ])dnl |
| |
| dnl |
| dnl check for apache (static link). |
| dnl |
| |
| AC_DEFUN(JTC_CHECK_APACHE,[ |
| |
| dnl it is copied from the configure of JServ ;=) |
| dnl and adapted. |
| |
| apache_dir_is_src="false" |
| AC_ARG_WITH(apache, |
| [ --with-apache=DIR Build static Apache module. DIR is the pathname |
| to the Apache source directory.], |
| [ |
| if ${TEST} ! -z "$WEBSERVER" ; then |
| AC_MSG_ERROR([Sorry cannot use --with-apxs=${APXS} and --with-apache=${withval} togother, please choose one of both]) |
| fi |
| |
| AC_MSG_CHECKING([for Apache source directory (assume static build)]) |
| |
| if ${TEST} -n "${withval}" && ${TEST} -d "${withval}" ; then |
| if ${TEST} -d "${withval}/src" ; then |
| # handle the case where people use relative paths to |
| # the apache source directory by pre-pending the current |
| # build directory to the path. there are probably |
| # errors with this if configure is run while in a |
| # different directory than what you are in at the time |
| if ${TEST} -n "`${ECHO} ${withval}|${GREP} \"^\.\.\"`" ; then |
| withval=`pwd`/${withval} |
| fi |
| |
| apache_dir=${withval} |
| apache_dir_is_src="true" |
| AC_MSG_RESULT(${apache_dir}) |
| |
| AC_MSG_CHECKING(for Apache include directory) |
| |
| if ${TEST} -d "${withval}/src/include" ; then |
| # read osdir from the existing apache. |
| osdir=`${GREP} '^OSDIR=' ${withval}/src/Makefile.config | ${SED} -e 's:^OSDIR=.*/os:os:'` |
| if ${TEST} -z "${osdir}" ; then |
| osdir=os/unix |
| fi |
| apache_include="-I${withval}/src/include \ |
| -I${withval}/src/${osdir}" |
| WEBSERVER="apache-1.3" |
| AC_MSG_RESULT([${apache_include}, version 1.3]) |
| else |
| AC_MSG_ERROR([Sorry Apache 1.2.x is no longer supported.]) |
| fi |
| else |
| if ${TEST} -d "${withval}/include" ; then |
| # osdir for Apache20. |
| WEBSERVER="apache-2.0" |
| apache_dir=${withval} |
| apache_dir_is_src="true" |
| AC_MSG_RESULT(${apache_dir}) |
| fi |
| fi |
| fi |
| |
| dnl Make sure we have a result. |
| if ${TEST} -z "$WEBSERVER" ; then |
| AC_MSG_ERROR([Directory $apache_dir is not a valid Apache source distribution]) |
| fi |
| |
| # VT: Now, which one I'm supposed to use? Let's figure it out later |
| |
| configure_apache=true |
| configure_src=true |
| |
| AC_MSG_RESULT([building connector for \"$WEBSERVER\"]) |
| ], |
| [ |
| AC_MSG_RESULT(no apache given) |
| ]) |
| AC_SUBST(apache_include) |
| APACHE_DIR=${apache_dir} |
| AC_SUBST(APACHE_DIR) |
| ]) |
| |
| dnl |
| dnl check for EAPI (static link only). |
| dnl |
| |
| AC_DEFUN(JTC_CHECK_EAPI,[ |
| |
| dnl CFLAGS for EAPI mod_ssl (Apache 1.3) |
| dnl it also allows the CFLAGS environment variable. |
| CFLAGS="${CFLAGS}" |
| AC_ARG_ENABLE( |
| EAPI, |
| [ --enable-EAPI Enable EAPI support (mod_ssl, Apache 1.3)], |
| [ |
| case "${enableval}" in |
| y | Y | YES | yes | TRUE | true ) |
| CFLAGS="${CFLAGS} -DEAPI" |
| AC_MSG_RESULT([...Enabling EAPI Support...]) |
| ;; |
| esac |
| ]) |
| AC_SUBST(CFLAGS) |
| ]) |
| |
| |
| dnl |
| dnl set flags for apxs. |
| dnl |
| |
| AC_DEFUN(JTC_SET_APXS_FLAGS,[ |
| dnl the APXSCFLAGS is given by apxs to the C compiler |
| dnl the APXSLDFLAGS is given to the linker (for APRVARS). |
| APXSLDFLAGS="" |
| APXSCFLAGS="" |
| if ${TEST} -n "${CFLAGS}" ; then |
| APXSCFLAGS="${CFLAGS}" |
| fi |
| dnl the APXSLDFLAGS is normaly empty but APXSCFLAGS is not. |
| if ${TEST} -n "${LDFLAGS}" ; then |
| APXSLDFLAGS="-Wl,${LDFLAGS}" |
| fi |
| AC_SUBST(APXSCFLAGS) |
| AC_SUBST(APXSLDFLAGS) |
| ]) |
