docs/src/reference/the-traversal.asciidoc

////
Licensed to the Apache Software Foundation (ASF) under one or more
contributor license agreements.  See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The ASF licenses this file to You under the Apache License, Version 2.0
(the "License"); you may not use this file except in compliance with
the License.  You may obtain a copy of the License at

  http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
////
[[traversal]]
= The Traversal

image::gremlin-running.png[width=125]

At the most general level there is `Traversal<S,E>` which implements `Iterator<E>`, where the `S` stands for start and
the `E` stands for end. A traversal is composed of four primary components:
  
 . `Step<S,E>`: an individual function applied to `S` to yield `E`. Steps are chained within a traversal.
 . `TraversalStrategy`: interceptor methods to alter the execution of the traversal (e.g. query re-writing).
 . `TraversalSideEffects`: key/value pairs that can be used to store global information about the traversal.
 . `Traverser<T>`: the object propagating through the `Traversal` currently representing an object of type `T`. 

The classic notion of a graph traversal is provided by `GraphTraversal<S,E>` which extends `Traversal<S,E>`.
`GraphTraversal` provides an interpretation of the graph data in terms of vertices, edges, etc. and thus, a graph
traversal link:http://en.wikipedia.org/wiki/Domain-specific_language[DSL].

IMPORTANT: The underlying `Step` implementations provided by TinkerPop should encompass most of the functionality
required by a DSL author. It is important that DSL authors leverage the provided steps as then the common optimization
and decoration strategies can reason on the underlying traversal sequence. If new steps are introduced, then common
traversal strategies may not function properly.

[[graph-traversal-steps]]
== Graph Traversal Steps

image::step-types.png[width=650]

A `GraphTraversal<S,E>` is spawned from a `GraphTraversalSource`. It can also be spawned anonymously (i.e. empty)
via `+__+`. A graph traversal is composed of an ordered list of steps. All the steps provided by `GraphTraversal`
inherit from the more general forms diagrammed above. A list of all the steps (and their descriptions) are provided
in the TinkerPop3 link:https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html[GraphTraversal JavaDoc].
The following subsections will demonstrate the GraphTraversal steps using the <<gremlin-console,Gremlin Console>>.

IMPORTANT: The basics for starting a traversal are described in <<the-graph-process,The Graph Process>> section as
well as in the link:https://tinkerpop.apache.org/docs/current/tutorials/getting-started/[Getting Started] tutorial.

NOTE: To reduce the verbosity of the expression, it is good to
`+import static org.apache.tinkerpop.gremlin.process.traversal.dsl.graph.__.*+`. This way, instead of doing `+__.inE()+`
for an anonymous traversal, it is possible to simply write `inE()`. Be aware of language-specific reserved keywords
when using anonymous traversals. For example, `in` and `as` are reserved keywords in Groovy, therefore you must use
the verbose syntax `+__.in()+` and `+__.as()+` to avoid collisions.

[[general-steps]]
=== General Steps

There are five general steps, each having a traversal and a lambda representation, by which all other specific steps described later extend.

[width="100%",cols="10,12",options="header"]
|=========================================================
| Step| Description
| `map(Traversal<S, E>)`  `map(Function<Traverser<S>, E>)` | map the traverser to some object of type `E` for the next step to process.
| `flatMap(Traversal<S, E>)`  `flatMap(Function<Traverser<S>, Iterator<E>>)` | map the traverser to an iterator of `E` objects that are streamed to the next step.
| `filter(Traversal<?, ?>)`  `filter(Predicate<Traverser<S>>)` | map the traverser to either true or false, where false will not pass the traverser to the next step.
| `sideEffect(Traversal<S, S>)`  `sideEffect(Consumer<Traverser<S>>)` | perform some operation on the traverser and pass it to the next step.
| `branch(Traversal<S, M>)`  `branch(Function<Traverser<S>,M>)` | split the traverser to all the traversals indexed by the `M` token.
|=========================================================

WARNING: Lambda steps are presented for educational purposes as they represent the foundational constructs of the
Gremlin language. In practice, lambda steps should be avoided in favor of their traversals representation and traversal
verification strategies exist to disallow their use unless explicitly "turned off." For more information on the problems
with lambdas, please read <<a-note-on-lambdas,A Note on Lambdas>>.

The `Traverser<S>` object provides access to:

 . The current traversed `S` object -- `Traverser.get()`.
 . The current path traversed by the traverser -- `Traverser.path()`.
  .. A helper shorthand to get a particular path-history object -- `Traverser.path(String) == Traverser.path().get(String)`.
 . The number of times the traverser has gone through the current loop -- `Traverser.loops()`.
 . The number of objects represented by this traverser -- `Traverser.bulk()`.
 . The local data structure associated with this traverser -- `Traverser.sack()`.
 . The side-effects associated with the traversal -- `Traverser.sideEffects()`.
  .. A helper shorthand to get a particular side-effect -- `Traverser.sideEffect(String) == Traverser.sideEffects().get(String)`.

image:map-lambda.png[width=150,float=right]
[gremlin-groovy,modern]
----
g.V(1).out().values('name') <1>
g.V(1).out().map {it.get().value('name')} <2>
g.V(1).out().map(values('name')) <3>
----

<1> An outgoing traversal from vertex 1 to the name values of the adjacent vertices.
<2> The same operation, but using a lambda to access the name property values.
<3> Again the same operation, but using the traversal representation of `map()`.

image:filter-lambda.png[width=160,float=right]
[gremlin-groovy,modern]
----
g.V().filter {it.get().label() == 'person'} <1>
g.V().filter(label().is('person')) <2>
g.V().hasLabel('person') <3>
----

<1> A filter that only allows the vertex to pass if it has the "person" label
<2> The same operation, but using the traversal representation of `filter()`.
<3> The more specific `has()`-step is implemented as a `filter()` with respective predicate.

image:side-effect-lambda.png[width=175,float=right]
[gremlin-groovy,modern]
----
g.V().hasLabel('person').sideEffect(System.out.&println) <1>
g.V().sideEffect(outE().count().store("o")).
      sideEffect(inE().count().store("i")).cap("o","i") <2>
----

<1> Whatever enters `sideEffect()` is passed to the next step, but some intervening process can occur.
<2> Compute the out- and in-degree for each vertex. Both `sideEffect()` are fed with the same vertex.

image:branch-lambda.png[width=180,float=right]
[gremlin-groovy,modern]
----
g.V().branch {it.get().value('name')}.
      option('marko', values('age')).
      option(none, values('name')) <1>
g.V().branch(values('name')).
      option('marko', values('age')).
      option(none, values('name')) <2>
g.V().choose(has('name','marko'),
             values('age'),
             values('name')) <3>
----

<1> If the vertex is "marko", get his age, else get the name of the vertex.
<2> The same operation, but using the traversal representing of `branch()`.
<3> The more specific boolean-based `choose()`-step is implemented as a `branch()`.

[[start-steps]]
=== Start Steps

Not all steps are capable of starting a `GraphTraversal`. Only those steps on the `GraphTraversalSource` can do that.
Many of the methods on `GraphTraversalSource` are actually for its configuration. From that configured object, it is
then possible to use start steps to spawn a `GraphTraversal`.

Configuration methods can be identified by their names with make use of "with" as a prefix:

* `withBulk()` - This value is `true` by default allowing for normal <<barrier-step,bulking>> operations, but when set
to `false`, introduces a subtle change in that behavior as shown in examples in <<sack-step,sack()-step>>.
* `withComputer()` - Adds a `Computer` that will be used to process the traversal (<<sparkgraphcomputer,example>>).
* `withSack()` - Adds a "sack" that can be accessed by traversals spawned from this source (<<sack-step,example>>).
* `withSideEffect()` - Adds an arbitrary `Object` to traversals spawned from this source which can be accessed as a
side-effect given the supplied key (<<math-step,example>>).
* `withStrategies()` - Includes additional `TraversalStrategy` instances to be applied to any traversals spawned from
the configured source (<<readonlystrategy, example>>).
* `withPath()`
* `withoutStrategies()` - Removes a particular `TraversalStrategy` from those to be applied to traversals spawned from
the configured source.

Spawn steps, which actually yield a traversal, typically match the names of existing steps:

* `addE()` - Adds an `Edge` to start the traversal (<<addedge-step, example>>).
* `addV()` - Adds a `Vertex` to start the traversal (<<addvertex-step, example>>).
* `E()` - Reads edges from the graph to start the traversal (<<graph-step, example>>).
* `inject()` - Inserts arbitrary objects to start the traversal (<<inject-step, example>>).
* `V()` - Reads vertices from the graph to start the traversal (<<graph-step, example>>).

[[terminal-steps]]
=== Terminal Steps

Typically, when a step is concatenated to a traversal a traversal is returned. In this way, a traversal is built up
in a link:https://en.wikipedia.org/wiki/Fluent_interface[fluent], link:https://en.wikipedia.org/wiki/Monoid[monadic] fashion.
However, some steps do not return a traversal, but instead, execute the traversal and return a result. These steps are known
as terminal steps (*terminal*) and they are explained via the examples below.

[gremlin-groovy,modern]
----
g.V().out('created').hasNext() <1>
g.V().out('created').next() <2>
g.V().out('created').next(2) <3>
g.V().out('nothing').tryNext() <4>
g.V().out('created').toList() <5>
g.V().out('created').toSet() <6>
g.V().out('created').toBulkSet() <7>
results = ['blah',3]
g.V().out('created').fill(results) <8>
g.addV('person').iterate() <9>
----

<1> `hasNext()` determines whether there are available results.
<2> `next()` will return the next result.
<3> `next(n)` will return the next `n` results in a list.
<4> `tryNext()` will return an `Optional` and thus, is a composite of `hasNext()`/`next()`.
<5> `toList()` will return all results in a list.
<6> `toSet()` will return all results in a set (thus, duplicates removed).
<7> `toBulkSet()` will return all results in a weighted set (thus, duplicates preserved via weighting).
<8> `fill(collection)` will put all results in the provided collection and return the collection when complete.
<9> `iterate()` does not exactly fit the definition of a terminal step in that it doesn't return a result, but still
returns a traversal - it does however behave as a terminal step in that it iterates the traversal and generates side
effects without returning the actual result.

Finally, <<explain-step,`explain()`>>-step is also a terminal step and is described in its own section.

[[addedge-step]]
=== AddEdge Step

link:http://en.wikipedia.org/wiki/Automated_reasoning[Reasoning] is the process of making explicit what is implicit
in the data. What is explicit in a graph are the objects of the graph -- i.e. vertices and edges. What is implicit
in the graph is the traversal. In other words, traversals expose meaning where the meaning is determined by the
traversal definition. For example, take the concept of a "co-developer." Two people are co-developers if they have
worked on the same project together. This concept can be represented as a traversal and thus, the concept of
"co-developers" can be derived. Moreover, what was once implicit can be made explicit via the `addE()`-step
(*map*/*sideEffect*).

image::addedge-step.png[width=450]

[gremlin-groovy,modern]
----
g.V(1).as('a').out('created').in('created').where(neq('a')).
  addE('co-developer').from('a').property('year',2009) <1>
g.V(3,4,5).aggregate('x').has('name','josh').as('a').
  select('x').unfold().hasLabel('software').addE('createdBy').to('a') <2>
g.V().as('a').out('created').addE('createdBy').to('a').property('acl','public') <3>
g.V(1).as('a').out('knows').
  addE('livesNear').from('a').property('year',2009).
  inV().inE('livesNear').values('year') <4>
g.V().match(
        __.as('a').out('knows').as('b'),
        __.as('a').out('created').as('c'),
        __.as('b').out('created').as('c')).
      addE('friendlyCollaborator').from('a').to('b').
        property(id,23).property('project',select('c').values('name')) <5>
g.E(23).valueMap()
marko = g.V().has('name','marko').next()
peter = g.V().has('name','peter').next()
g.V(marko).addE('knows').to(peter) <6>
g.addE('knows').from(marko).to(peter) <7>
----

<1> Add a co-developer edge with a year-property between marko and his collaborators.
<2> Add incoming createdBy edges from the josh-vertex to the lop- and ripple-vertices.
<3> Add an inverse createdBy edge for all created edges.
<4> The newly created edge is a traversable object.
<5> Two arbitrary bindings in a traversal can be joined ``from()``->``to()``, where `id` can be provided for graphs that
supports user provided ids.
<6> Add an edge between marko and peter given the directed (detached) vertex references.
<7> Add an edge between marko and peter given the directed (detached) vertex references.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#addE-java.lang.String-++[`addE(String)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#addE-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`addE(Traversal)`]

[[addvertex-step]]
=== AddVertex Step

The `addV()`-step is used to add vertices to the graph (*map*/*sideEffect*). For every incoming object, a vertex is
created. Moreover, `GraphTraversalSource` maintains an `addV()` method.

[gremlin-groovy,modern]
----
g.addV('person').property('name','stephen')
g.V().values('name')
g.V().outE('knows').addV().property('name','nothing')
g.V().has('name','nothing')
g.V().has('name','nothing').bothE()
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#addV--++[`addV()`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#addV-java.lang.String-++[`addV(String)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#addV-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`addV(Traversal)`]

[[addproperty-step]]
=== AddProperty Step

The `property()`-step is used to add properties to the elements of the graph (*sideEffect*). Unlike `addV()` and
`addE()`, `property()` is a full sideEffect step in that it does not return the property it created, but the element
that streamed into it. Moreover, if `property()` follows an `addV()` or `addE()`, then it is "folded" into the
previous step to enable vertex and edge creation with all its properties in one creation operation.

[gremlin-groovy,modern]
----
g.V(1).property('country','usa')
g.V(1).property('city','santa fe').property('state','new mexico').valueMap()
g.V(1).property(list,'age',35)  <1>
g.V(1).valueMap()
g.V(1).property('friendWeight',outE('knows').values('weight').sum(),'acl','private') <2>
g.V(1).properties('friendWeight').valueMap() <3>
----

<1> For vertices, a cardinality can be provided for <<vertex-properties,vertex properties>>.
<2> It is possible to select the property value (as well as key) via a traversal.
<3> For vertices, the `property()`-step can add meta-properties.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#property-java.lang.Object-java.lang.Object-java.lang.Object...-++[`property(Object, Object, Object...)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#property-org.apache.tinkerpop.gremlin.structure.VertexProperty.Cardinality-java.lang.Object-java.lang.Object-java.lang.Object...-++[`property(Cardinality, Object, Object, Object...)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/structure/VertexProperty.Cardinality.html++[`Cardinality`]

[[aggregate-step]]
=== Aggregate Step

image::aggregate-step.png[width=800]

The `aggregate()`-step (*sideEffect*) is used to aggregate all the objects at a particular point of traversal into a
`Collection`. The step uses link:http://en.wikipedia.org/wiki/Eager_evaluation[eager evaluation] in that no objects
continue on until all previous objects have been fully aggregated (as opposed to <<store-step,`store()`>> which
link:http://en.wikipedia.org/wiki/Lazy_evaluation[lazily] fills a collection). The eager evaluation nature is crucial
in situations where everything at a particular point is required for future computation. An example is provided below.

[gremlin-groovy,modern]
----
g.V(1).out('created') <1>
g.V(1).out('created').aggregate('x') <2>
g.V(1).out('created').aggregate('x').in('created') <3>
g.V(1).out('created').aggregate('x').in('created').out('created') <4>
g.V(1).out('created').aggregate('x').in('created').out('created').
       where(without('x')).values('name') <5>
----

<1> What has marko created?
<2> Aggregate all his creations.
<3> Who are marko's collaborators?
<4> What have marko's collaborators created?
<5> What have marko's collaborators created that he hasn't created?

In link:http://en.wikipedia.org/wiki/Recommender_system[recommendation systems], the above pattern is used:
    
    "What has userA liked? Who else has liked those things? What have they liked that userA hasn't already liked?"

Finally, `aggregate()`-step can be modulated via `by()`-projection.

[gremlin-groovy,modern]
----
g.V().out('knows').aggregate('x').cap('x')
g.V().out('knows').aggregate('x').by('name').cap('x')
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#aggregate-java.lang.String-++[`aggregate(String)`]

[[and-step]]
=== And Step

The `and()`-step ensures that all provided traversals yield a result (*filter*). Please see <<or-step,`or()`>> for or-semantics.

[NOTE, caption=Python]
====
The term `and` is a reserved word in Python, and therefore must be referred to in Gremlin with `and_()`.
====

[gremlin-groovy,modern]
----
g.V().and(
   outE('knows'),
   values('age').is(lt(30))).
     values('name')
----

The `and()`-step can take an arbitrary number of traversals. All traversals must produce at least one output for the
original traverser to pass to the next step.

An link:http://en.wikipedia.org/wiki/Infix_notation[infix notation] can be used as well. Though, with infix notation,
only two traversals can be and'd together.

[gremlin-groovy,modern]
----
g.V().where(outE('created').and().outE('knows')).values('name')
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#and-org.apache.tinkerpop.gremlin.process.traversal.Traversal...-++[`and(Traversal...)`]

[[as-step]]
=== As Step

The `as()`-step is not a real step, but a "step modulator" similar to <<by-step,`by()`>> and <<option-step,`option()`>>.
With `as()`, it is possible to provide a label to the step that can later be accessed by steps and data structures
that make use of such labels -- e.g., <<select-step,`select()`>>, <<match-step,`match()`>>, and path.

[NOTE, caption=Groovy]
====
The term `as` is a reserved word in Groovy, and when therefore used as part of an anonymous traversal must be referred
to in Gremlin with the double underscore `+__.as()+`.
====

[NOTE, caption=Python]
====
The term `as` is a reserved word in Python, and therefore must be referred to in Gremlin with `as_()`.
====

[gremlin-groovy,modern]
----
g.V().as('a').out('created').as('b').select('a','b')            <1>
g.V().as('a').out('created').as('b').select('a','b').by('name') <2>
----

<1> Select the objects labeled "a" and "b" from the path.
<2> Select the objects labeled "a" and "b" from the path and, for each object, project its name value.

A step can have any number of labels associated with it. This is useful for referencing the same step multiple times in a future step.

[gremlin-groovy,modern]
----
g.V().hasLabel('software').as('a','b','c').
   select('a','b','c').
     by('name').
     by('lang').
     by(__.in('created').values('name').fold())
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#as-java.lang.String-java.lang.String...-++[`as(String,String...)`]

[[barrier-step]]
=== Barrier Step

The `barrier()`-step (*barrier*) turns the lazy traversal pipeline into a bulk-synchronous pipeline. This step is
useful in the following situations:

  * When everything prior to `barrier()` needs to be executed before moving onto the steps after the `barrier()` (i.e. ordering).
  * When "stalling" the traversal may lead to a "bulking optimization" in traversals that repeatedly touch many of the same elements (i.e. optimizing).

[gremlin-groovy,modern]
----
g.V().sideEffect{println "first: ${it}"}.sideEffect{println "second: ${it}"}.iterate()
g.V().sideEffect{println "first: ${it}"}.barrier().sideEffect{println "second: ${it}"}.iterate()
----

The theory behind a "bulking optimization" is simple. If there are one million traversers at vertex 1, then there is
no need to calculate one million `both()`-computations. Instead, represent those one million traversers as a single
traverser with a `Traverser.bulk()` equal to one million and execute `both()` once. A bulking optimization example is
made more salient on a larger graph. Therefore, the example below leverages the <<grateful-dead,Grateful Dead graph>>.

[gremlin-groovy]
----
graph = TinkerGraph.open()
graph.io(graphml()).readGraph('data/grateful-dead.xml')
g = graph.traversal().withoutStrategies(LazyBarrierStrategy) <1>
clockWithResult(1){g.V().both().both().both().count().next()} <2>
clockWithResult(1){g.V().repeat(both()).times(3).count().next()} <3>
clockWithResult(1){g.V().both().barrier().both().barrier().both().barrier().count().next()} <4>
----

<1> Explicitly remove `LazyBarrierStrategy` which yields a bulking optimization.
<2> A non-bulking traversal where each traverser is processed.
<3> Each traverser entering `repeat()` has its recursion bulked.
<4> A bulking traversal where implicit traversers are not processed.

If `barrier()` is provided an integer argument, then the barrier will only hold `n`-number of unique traversers in its
barrier before draining the aggregated traversers to the next step. This is useful in the aforementioned bulking
optimization scenario with the added benefit of reducing the risk of an out-of-memory exception.

`LazyBarrierStrategy` inserts `barrier()`-steps into a traversal where appropriate in order to gain the
"bulking optimization."

[gremlin-groovy]
----
graph = TinkerGraph.open()
graph.io(graphml()).readGraph('data/grateful-dead.xml')
g = graph.traversal() <1>
clockWithResult(1){g.V().both().both().both().count().next()}
g.V().both().both().both().count().iterate().toString()  <2>
----

<1> `LazyBarrierStrategy` is a default strategy and thus, does not need to be explicitly activated.
<2> With `LazyBarrierStrategy` activated, `barrier()`-steps are automatically inserted where appropriate.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#barrier--++[`barrier()`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#barrier-java.util.function.Consumer-++[`barrier(Consumer)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#barrier-int-++[`barrier(int)`]

[[by-step]]
=== By Step

The `by()`-step is not an actual step, but instead is a "step-modulator" similar to <<as-step,`as()`>> and
<<option-step,`option()`>>. If a step is able to accept traversals, functions, comparators, etc. then `by()` is the
means by which they are added. The general pattern is `step().by()...by()`. Some steps can only accept one `by()`
while others can take an arbitrary amount.

[gremlin-groovy,modern]
----
g.V().group().by(bothE().count()) <1>
g.V().group().by(bothE().count()).by('name') <2>
g.V().group().by(bothE().count()).by(count())  <3>
----

<1> `by(outE().count())` will group the elements by their edge count (*traversal*).
<2> `by('name')` will process the grouped elements by their name (*element property projection*).
<3> `by(count())` will count the number of elements in each group (*traversal*).

The following steps all support `by()`-modulation. Note that the semantics of such modulation should be understood
on a step-by-step level and thus, as discussed in their respective section of the documentation.

* <<dedup-step, `dedup()`>>: dedup on the results of a `by()`-modulation.
* <<cyclicpath-step, `cyclicPath()`>>: filter if the traverser's path is cyclic given `by()`-modulation.
* <<simplepath-step, `simplePath()`>>: filter if the traverser's path is simple given `by()`-modulation.
* <<sample-step, `sample()`>>: sample using the value returned by `by()`-modulation.
* <<where-step, `where()`>>: determine the predicate given the testing of the results of `by()`-modulation.
* <<groupcount-step,`groupCount()`>>: count those groups where the group keys are the result of `by()`-modulation.
* <<group-step, `group()`>>: create group keys and values according to `by()`-modulation.
* <<order-step, `order()`>>: order the objects by the results of a `by()`-modulation.
* <<path-step, `path()`>>: get the path of the traverser where each path element is `by()`-modulated.
* <<project-step, `project()`>>: project a map of results given various `by()`-modulations off the current object.
* <<select-step, `select()`>>: select path elements and transform them via `by()`-modulation.
* <<tree-step, `tree()`>>: get a tree of traversers objects where the objects have been `by()`-modulated.
* <<aggregate-step, `aggregate()`>>: aggregate all objects into a set but only store their `by()`-modulated values.
* <<store-step, `store()`>>: store all objects into a set but only store their `by()`-modulated values.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#by--++[`by()`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#by-java.util.Comparator-++[`by(Comparator)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#by-java.util.function.Function-java.util.Comparator-++[`by(Function,Comparator)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#by-java.util.function.Function-++[`by(Function)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#by-org.apache.tinkerpop.gremlin.process.traversal.Order-++[`by(Order)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#by-java.lang.String-++[`by(String)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#by-java.lang.String-java.util.Comparator-++[`by(String,Comparator)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#by-org.apache.tinkerpop.gremlin.structure.T-++[`by(T)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#by-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`by(Traversal)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#by-org.apache.tinkerpop.gremlin.process.traversal.Traversal-java.util.Comparator-++[`by(Traversal,Comparator)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/structure/T.html++[`T`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/Order.html++[`Order`]


[[cap-step]]
=== Cap Step

The `cap()`-step (*barrier*) iterates the traversal up to itself and emits the sideEffect referenced by the provided
key. If multiple keys are provided, then a `Map<String,Object>` of sideEffects is emitted.

[gremlin-groovy,modern]
----
g.V().groupCount('a').by(label).cap('a')      <1>
g.V().groupCount('a').by(label).groupCount('b').by(outE().count()).cap('a','b')   <2>
----

<1> Group and count vertices by their label.  Emit the side effect labeled 'a', which is the group count by label.
<2> Same as statement 1, but also emit the side effect labeled 'b' which groups vertices by the number of out edges.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#cap-java.lang.String-java.lang.String...-++[`cap(String,String...)`]

[[choose-step]]
=== Choose Step

image::choose-step.png[width=700]

The `choose()`-step (*branch*) routes the current traverser to a particular traversal branch option. With `choose()`,
it is possible to implement if/then/else-semantics as well as more complicated selections.

[gremlin-groovy,modern]
----
g.V().hasLabel('person').
      choose(values('age').is(lte(30)),
        __.in(),
        __.out()).values('name') <1>
g.V().hasLabel('person').
      choose(values('age')).
        option(27, __.in()).
        option(32, __.out()).values('name') <2>
----

<1> If the traversal yields an element, then do `in`, else do `out` (i.e. true/false-based option selection).
<2> Use the result of the traversal as a key to the map of traversal options (i.e. value-based option selection).

If the "false"-branch is not provided, then if/then-semantics are implemented.

[gremlin-groovy,modern]
----
g.V().choose(hasLabel('person'), out('created')).values('name') <1>
g.V().choose(hasLabel('person'), out('created'), identity()).values('name') <2>
----

<1> If the vertex is a person, emit the vertices they created, else emit the vertex.
<2> If/then/else with an `identity()` on the false-branch is equivalent to if/then with no false-branch.

Note that `choose()` can have an arbitrary number of options and moreover, can take an anonymous traversal as its choice function.

[gremlin-groovy,modern]
----
g.V().hasLabel('person').
      choose(values('name')).
        option('marko', values('age')).
        option('josh', values('name')).
        option('vadas', valueMap()).
        option('peter', label())
----

The `choose()`-step can leverage the `Pick.none` option match. For anything that does not match a specified option, the `none`-option is taken.

[gremlin-groovy,modern]
----
g.V().hasLabel('person').
      choose(values('name')).
        option('marko', values('age')).
        option(none, values('name'))
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#choose-java.util.function.Function-++[`choose(Function)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#choose-java.util.function.Predicate-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`choose(Predicate,Traversal)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#choose-java.util.function.Predicate-org.apache.tinkerpop.gremlin.process.traversal.Traversal-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`choose(Predicate,Traversal,Traversal)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#choose-org.apache.tinkerpop.gremlin.process.traversal.Traversal-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`choose(Traversal,Traversal)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#choose-org.apache.tinkerpop.gremlin.process.traversal.Traversal-org.apache.tinkerpop.gremlin.process.traversal.Traversal-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`choose(Traversal,Traversal,Traversal)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#choose-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`choose(Traversal)`]

[[coalesce-step]]
=== Coalesce Step

The `coalesce()`-step evaluates the provided traversals in order and returns the first traversal that emits at
least one element.

[gremlin-groovy,modern]
----
g.V(1).coalesce(outE('knows'), outE('created')).inV().path().by('name').by(label)
g.V(1).coalesce(outE('created'), outE('knows')).inV().path().by('name').by(label)
g.V(1).property('nickname', 'okram')
g.V().hasLabel('person').coalesce(values('nickname'), values('name'))
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#coalesce-org.apache.tinkerpop.gremlin.process.traversal.Traversal...-++[`coalesce(Traversal...)`]

[[coin-step]]
=== Coin Step

To randomly filter out a traverser, use the `coin()`-step (*filter*). The provided double argument biases the "coin toss."

[gremlin-groovy,modern]
----
g.V().coin(0.5)
g.V().coin(0.0)
g.V().coin(1.0)
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#coin-double-++[`coin(double)`]

[[constant-step]]
=== Constant Step

To specify a constant value for a traverser, use the `constant()`-step (*map*).  This is often useful with conditional
steps like <<choose-step,`choose()`-step>> or <<coalesce-step,`coalesce()`-step>>.

[gremlin-groovy,modern]
----
g.V().choose(hasLabel('person'),
    values('name'),
    constant('inhuman')) <1>
g.V().coalesce(
    hasLabel('person').values('name'),
    constant('inhuman')) <2>
----

<1> Show the names of people, but show "inhuman" for other vertices.
<2> Same as statement 1 (unless there is a person vertex with no name).

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#constant-E2-++[`constant(Object)`]

[[count-step]]
=== Count Step

image::count-step.png[width=195]

The `count()`-step (*map*) counts the total number of represented traversers in the streams (i.e. the bulk count).

[gremlin-groovy,modern]
----
g.V().count()
g.V().hasLabel('person').count()
g.V().hasLabel('person').outE('created').count().path()  <1>
g.V().hasLabel('person').outE('created').count().map {it.get() * 10}.path() <2>
----

<1> `count()`-step is a <<a-note-on-barrier-steps,reducing barrier step>> meaning that all of the previous traversers are folded into a new traverser.
<2> The path of the traverser emanating from `count()` starts at `count()`.

IMPORTANT: `count(local)` counts the current, local object (not the objects in the traversal stream). This works for
`Collection`- and `Map`-type objects. For any other object, a count of 1 is returned.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#count--++[`count()`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#count-org.apache.tinkerpop.gremlin.process.traversal.Scope-++[`count(Scope)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/Scope.html++[`Scope`]

[[cyclicpath-step]]
=== CyclicPath Step

image::cyclicpath-step.png[width=400]

Each traverser maintains its history through the traversal over the graph -- i.e. its <<path-data-structure,path>>.
If it is important that the traverser repeat its course, then `cyclic()`-path should be used (*filter*). The step
analyzes the path of the traverser thus far and if there are any repeats, the traverser is filtered out over the
traversal computation. If non-cyclic behavior is desired, see <<simplepath-step,`simplePath()`>>.

[gremlin-groovy,modern]
----
g.V(1).both().both()
g.V(1).both().both().cyclicPath()
g.V(1).both().both().cyclicPath().path()
g.V(1).as('a').out('created').as('b').
  in('created').as('c').
  cyclicPath().
  path()
g.V(1).as('a').out('created').as('b').
  in('created').as('c').
  cyclicPath().from('a').to('b').
  path()
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#cyclicPath--++[`cyclicPath()`]

[[dedup-step]]
=== Dedup Step

With `dedup()`-step (*filter*), repeatedly seen objects are removed from the traversal stream. Note that if a
traverser's bulk is greater than 1, then it is set to 1 before being emitted.

[gremlin-groovy,modern]
----
g.V().values('lang')
g.V().values('lang').dedup()
g.V(1).repeat(bothE('created').dedup().otherV()).emit().path() <1>
----

<1> Traverse all `created` edges, but don't touch any edge twice.

If a by-step modulation is provided to `dedup()`, then the object is processed accordingly prior to determining if it
has been seen or not.

[gremlin-groovy,modern]
----
g.V().valueMap(true, 'name')
g.V().dedup().by(label).values('name')
----

Finally, if `dedup()` is provided an array of strings, then it will ensure that the de-duplication is not with respect
to the current traverser object, but to the path history of the traverser.

[gremlin-groovy,modern]
----
g.V().as('a').out('created').as('b').in('created').as('c').select('a','b','c')
g.V().as('a').out('created').as('b').in('created').as('c').dedup('a','b').select('a','b','c') <1>
----

<1> If the current `a` and `b` combination has been seen previously, then filter the traverser.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#dedup-org.apache.tinkerpop.gremlin.process.traversal.Scope-java.lang.String...-++[`dedup(Scope,String...)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#dedup-java.lang.String...-++[`dedup(String...)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/Scope.html++[`Scope`]

[[drop-step]]
=== Drop Step

The `drop()`-step (*filter*/*sideEffect*) is used to remove element and properties from the graph (i.e. remove). It
is a filter step because the traversal yields no outgoing objects.

[gremlin-groovy,modern]
----
g.V().outE().drop()
g.E()
g.V().properties('name').drop()
g.V().valueMap()
g.V().drop()
g.V()
----

*Additional References*

* link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#drop--++[`drop()`]

[[emit-step]]
=== Emit Step

The `emit`-step is not an actual step, but is instead a step modulator for `<<repeat-step,repeat()>>` (find more
documentation on the `emit()` there).

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#emit--++[`emit()`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#emit-java.util.function.Predicate-++[`emit(Predicate)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#emit-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`emit(Traversal)`]

[[explain-step]]
=== Explain Step

The `explain()`-step (*terminal*) will return a `TraversalExplanation`. A traversal explanation details how the
traversal (prior to `explain()`) will be compiled given the registered <<traversalstrategy,traversal strategies>>.
A `TraversalExplanation` has a `toString()` representation with 3-columns. The first column is the
traversal strategy being applied. The second column is the traversal strategy category: [D]ecoration, [O]ptimization,
[P]rovider optimization, [F]inalization, and [V]erification. Finally, the third column is the state of the traversal
post strategy application. The final traversal is the resultant execution plan.

[gremlin-groovy,modern]
----
g.V().hasLabel('person').outE().identity().inV().count().is(gt(5)).explain()
----

For traversal profiling information, please see <<profile-step,`profile()`>>-step.

[[fold-step]]
=== Fold Step

There are situations when the traversal stream needs a "barrier" to aggregate all the objects and emit a computation
that is a function of the aggregate. The `fold()`-step (*map*) is one particular instance of this. Please see
<<unfold-step,`unfold()`>>-step for the inverse functionality.

[gremlin-groovy,modern]
----
g.V(1).out('knows').values('name')
g.V(1).out('knows').values('name').fold() <1>
g.V(1).out('knows').values('name').fold().next().getClass() <2>
g.V(1).out('knows').values('name').fold(0) {a,b -> a + b.length()} <3>
g.V().values('age').fold(0) {a,b -> a + b} <4>
g.V().values('age').fold(0, sum) <5>
g.V().values('age').sum() <6>
----

<1> A parameterless `fold()` will aggregate all the objects into a list and then emit the list.
<2> A verification of the type of list returned.
<3> `fold()` can be provided two arguments --  a seed value and a reduce bi-function ("vadas" is 5 characters + "josh" with 4 characters).
<4> What is the total age of the people in the graph?
<5> The same as before, but using a built-in bi-function.
<6> The same as before, but using the <<sum-step,`sum()`-step>>.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#fold--++[`fold()`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#fold-E2-java.util.function.BiFunction-++[`fold(Object,BiFunction)`]

[[from-step]]
=== From Step

The `from()`-step is not an actual step, but instead is a "step-modulator" similar to <<as-step,`as()`>> and
<<by-step,`by()`>>. If a step is able to accept traversals or strings then `from()` is the
means by which they are added. The general pattern is `step().from()`. See <<to-step,`to()`>>-step.

The list of steps that support `from()`-modulation are: <<simplepath-step,`simplePath()`>>, <<cyclicpath-step,`cyclicPath()`>>,
 <<path-step,`path()`>>, and <<addedge-step,`addE()`>>.

[NOTE, caption=Javascript]
====
The term `from` is a reserved word in Javascript, and therefore must be referred to in Gremlin with `from_()`.
====

[NOTE, caption=Python]
====
The term `from` is a reserved word in Python, and therefore must be referred to in Gremlin with `from_()`.
====

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#from-java.lang.String-++[`from(String)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#from-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`from(Traversal)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#from-org.apache.tinkerpop.gremlin.structure.Vertex-++[`from(Vertex)`]

[[graph-step]]
=== Graph Step

Graph steps are those that read vertices, `V()`, or edges, `E()`, from the graph. The `V()`-step is usually used to
start a `GraphTraversal`, but can also be used mid-traversal. The `E()`-step on the other hand can only be used as a
start step.

[gremlin-groovy,modern]
----
g.V(1) <1>
g.V().has('name', within('marko', 'vadas', 'josh')).as('person').
  V().has('name', within('lop', 'ripple')).addE('uses').from('person') <2>
g.E(11) <3>
g.E().hasLabel('knows').has('weight', gt(0.75))
----

<1> Find the vertex by its unique identifier (i.e. `T.id`) - not all graphs will use a numeric value for their identifier.
<2> An example where `V()` is used both as a start step and in the middle of a traversal.
<3> Find the edge by its unique identifier (i.e. `T.id`) - not all graphs will use a numeric value for their identifier.

NOTE: Whether a mid-traversal `V()` uses an index or not, depends on a) whether suitable index exists and b) if the
particular graph system provider implemented this functionality.

[gremlin-groovy,modern]
----
g.V().has('name', within('marko', 'vadas', 'josh')).as('person').
  V().has('name', within('lop', 'ripple')).addE('uses').from('person').toString() <1>
g.V().has('name', within('marko', 'vadas', 'josh')).as('person').
  V().has('name', within('lop', 'ripple')).addE('uses').from('person').iterate().toString() <2>
----

<1> Normally the `V()`-step will iterate over all vertices. However, graph strategies can fold ``HasContainer``'s into a `GraphStep` to allow index lookups.
<2> Whether the graph system provider supports mid-traversal `V()` index lookups or not can easily be determined by inspecting the `toString()` output of the iterated traversal. If `has` conditions were folded into the `V()`-step, an index - if one exists - will be used.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#V-java.lang.Object...-++[`V(Object...)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#E-java.lang.Object...-++[`E(Object...)`]

[[group-step]]
=== Group Step

As traversers propagate across a graph as defined by a traversal, sideEffect computations are sometimes required.
That is, the actual path taken or the current location of a traverser is not the ultimate output of the computation,
but some other representation of the traversal. The `group()`-step (*map*/*sideEffect*) is one such sideEffect that
organizes the objects according to some function of the object. Then, if required, that organization (a list) is
reduced. An example is provided below.

[gremlin-groovy,modern]
----
g.V().group().by(label) <1>
g.V().group().by(label).by('name') <2>
g.V().group().by(label).by(count()) <3>
----

<1> Group the vertices by their label.
<2> For each vertex in the group, get their name.
<3> For each grouping, what is its size?

The two projection parameters available to `group()` via `by()` are:

. Key-projection: What feature of the object to group on (a function that yields the map key)?
. Value-projection: What feature of the group to store in the key-list?

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#group--++[`group()`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#group-java.lang.String-++[`group(String)`]

[[groupcount-step]]
=== GroupCount Step

When it is important to know how many times a particular object has been at a particular part of a traversal,
`groupCount()`-step (*map*/*sideEffect*) is used.

    "What is the distribution of ages in the graph?"

[gremlin-groovy,modern]
----
g.V().hasLabel('person').values('age').groupCount()
g.V().hasLabel('person').groupCount().by('age') <1>
----

<1> You can also supply a pre-group projection, where the provided <<by-step,`by()`>>-modulation determines what to
group the incoming object by.

There is one person that is 32, one person that is 35, one person that is 27, and one person that is 29.

    "Iteratively walk the graph and count the number of times you see the second letter of each name."

image::groupcount-step.png[width=420]

[gremlin-groovy,modern]
----
g.V().repeat(both().groupCount('m').by(label)).times(10).cap('m')
----

The above is interesting in that it demonstrates the use of referencing the internal `Map<Object,Long>` of
`groupCount()` with a string variable. Given that `groupCount()` is a sideEffect-step, it simply passes the object
it received to its output. Internal to `groupCount()`, the object's count is incremented.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#groupCount--++[`groupCount()`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#groupCount-java.lang.String-++[`groupCount(String)`]

[[has-step]]
=== Has Step

image::has-step.png[width=670]

It is possible to filter vertices, edges, and vertex properties based on their properties using `has()`-step
(*filter*). There are numerous variations on `has()` including:

  * `has(key,value)`: Remove the traverser if its element does not have the provided key/value property.
  * `has(label, key, value)`: Remove the traverser if its element does not have the specified label and provided key/value property.
  * `has(key,predicate)`: Remove the traverser if its element does not have a key value that satisfies the bi-predicate. For more information on predicates, please read <<a-note-on-predicates,A Note on Predicates>>.
  * `hasLabel(labels...)`: Remove the traverser if its element does not have any of the labels.
  * `hasId(ids...)`: Remove the traverser if its element does not have any of the ids.
  * `hasKey(keys...)`: Remove the traverser if the property does not have all of the provided keys.
  * `hasValue(values...)`: Remove the traverser if its property does not have all of the provided values.
  * `has(key)`: Remove the traverser if its element does not have a value for the key.
  * `hasNot(key)`: Remove the traverser if its element has a value for the key.
  * `has(key, traversal)`: Remove the traverser if its object does not yield a result through the traversal off the property value.

[gremlin-groovy,modern]
----
g.V().hasLabel('person')
g.V().hasLabel('person').out().has('name',within('vadas','josh'))
g.V().hasLabel('person').out().has('name',within('vadas','josh')).
      outE().hasLabel('created')
g.V().has('age',inside(20,30)).values('age') <1>
g.V().has('age',outside(20,30)).values('age') <2>
g.V().has('name',within('josh','marko')).valueMap() <3>
g.V().has('name',without('josh','marko')).valueMap() <4>
g.V().has('name',not(within('josh','marko'))).valueMap() <5>
g.V().properties().hasKey('age').value() <6>
g.V().hasNot('age').values('name') <7>
----

<1> Find all vertices whose ages are between 20 (exclusive) and 30 (exclusive). In other words, the age must be greater than 20 and less than 30.
<2> Find all vertices whose ages are not between 20 (inclusive) and 30 (inclusive). In other words, the age must be less than 20 or greater than 30.
<3> Find all vertices whose names are exact matches to any names in the collection `[josh,marko]`, display all
the key,value pairs for those vertices.
<4> Find all vertices whose names are not in the collection `[josh,marko]`, display all the key,value pairs for those vertices.
<5> Same as the prior example save using `not` on `within` to yield `without`.
<6> Find all age-properties and emit their value.
<7> Find all vertices that do not have an age-property and emit their name.

TinkerPop does not support a regular expression predicate, although specific graph databases that leverage TinkerPop
may provide a partial match extension.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#has-java.lang.String-++[`has(String)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#has-java.lang.String-java.lang.Object-++[`has(String,Object)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#has-java.lang.String-org.apache.tinkerpop.gremlin.process.traversal.P-++[`has(String,P)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#has-java.lang.String-java.lang.String-java.lang.Object-++[`has(String,String,Object)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#has-java.lang.String-java.lang.String-org.apache.tinkerpop.gremlin.process.traversal.P-++[`has(String,String,P)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#has-java.lang.String-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`has(String,Traversal)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#has-org.apache.tinkerpop.gremlin.structure.T-java.lang.Object-++[`has(T,Object)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#has-org.apache.tinkerpop.gremlin.structure.T-org.apache.tinkerpop.gremlin.process.traversal.P-++[`has(T,P)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#has-org.apache.tinkerpop.gremlin.structure.T-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`has(T,Traversal)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#hasId-java.lang.Object-java.lang.Object...-++[`hasId(Object,Object...)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#hasId-org.apache.tinkerpop.gremlin.process.traversal.P-++[`hasId(P)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#hasKey-org.apache.tinkerpop.gremlin.process.traversal.P-++[`hasKey(P)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#hasKey-java.lang.String-java.lang.String...-++[`hasKey(String,String...)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#hasLabel-org.apache.tinkerpop.gremlin.process.traversal.P-++[`hasLabel(P)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#hasLabel-java.lang.String-java.lang.String...-++[`hasLabel(String,String...)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#hasNot-java.lang.String-++[`hasNot(String)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#hasValue-java.lang.Object-java.lang.Object...-++[`hasValue(Object,Object...)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#hasValue-org.apache.tinkerpop.gremlin.process.traversal.P-++[`hasValue(P)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/P.html++[`P`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/structure/T.html++[`T`]

[[id-step]]
=== Id Step

The `id()`-step (*map*) takes an `Element` and extracts its identifier from it.

[gremlin-groovy,modern]
----
g.V().id()
g.V(1).out().id().is(2)
g.V(1).outE().id()
g.V(1).properties().id()
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#id--++[`id()`]

[[identity-step]]
=== Identity Step

The `identity()`-step (*map*) is an link:https://en.wikipedia.org/wiki/Identity_function[identity function] which maps
the current object to itself.

[gremlin-groovy,modern]
----
g.V().identity()
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#identity--++[`identity()`]

[[inject-step]]
=== Inject Step

image::inject-step.png[width=800]

One of the major features of TinkerPop3 is "injectable steps." This makes it possible to insert objects arbitrarily
into a traversal stream. In general, `inject()`-step (*sideEffect*) exists and a few examples are provided below.

[gremlin-groovy,modern]
----
g.V(4).out().values('name').inject('daniel')
g.V(4).out().values('name').inject('daniel').map {it.get().length()}
g.V(4).out().values('name').inject('daniel').map {it.get().length()}.path()
----

In the last example above, note that the path starting with `daniel` is only of length 2. This is because the
`daniel` string was inserted half-way in the traversal. Finally, a typical use case is provided below -- when the
start of the traversal is not a graph object.

[gremlin-groovy,modern]
----
inject(1,2)
inject(1,2).map {it.get() + 1}
inject(1,2).map {it.get() + 1}.map {g.V(it.get()).next()}.values('name')
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#inject-E...-++[`inject(Object)`]

[[is-step]]
=== Is Step

It is possible to filter scalar values using `is()`-step (*filter*).

[NOTE, caption=Python]
====
The term `is` is a reserved word in Python, and therefore must be referred to in Gremlin with `is_()`.
====

[gremlin-groovy,modern]
----
g.V().values('age').is(32)
g.V().values('age').is(lte(30))
g.V().values('age').is(inside(30, 40))
g.V().where(__.in('created').count().is(1)).values('name') <1>
g.V().where(__.in('created').count().is(gte(2))).values('name') <2>
g.V().where(__.in('created').values('age').
                           mean().is(inside(30d, 35d))).values('name') <3>
----

<1> Find projects having exactly one contributor.
<2> Find projects having two or more contributors.
<3> Find projects whose contributors average age is between 30 and 35.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#is-java.lang.Object-++[`is(Object)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#is-org.apache.tinkerpop.gremlin.process.traversal.P-++[`is(P)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/P.html++[`P`]

[[key-step]]
=== Key Step

The `key()`-step (*map*) takes a `Property` and extracts the key from it.

[gremlin-groovy,theCrew]
----
g.V(1).properties().key()
g.V(1).properties().properties().key()
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#key--++[`key()`]

[[label-step]]
=== Label Step

The `label()`-step (*map*) takes an `Element` and extracts its label from it.

[gremlin-groovy,modern]
----
g.V().label()
g.V(1).outE().label()
g.V(1).properties().label()
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#label--++[`label()`]

[[limit-step]]
=== Limit Step

The `limit()`-step is analogous to <<range-step,`range()`-step>> save that the lower end range is set to 0.

[gremlin-groovy,modern]
----
g.V().limit(2)
g.V().range(0, 2)
----

The `limit()`-step can also be applied with `Scope.local`, in which case it operates on the incoming collection.
The examples below use the <<the-crew-toy-graph,The Crew>> toy data set.

[gremlin-groovy,theCrew]
----
g.V().valueMap().select('location').limit(local,2) <1>
g.V().valueMap().limit(local, 1) <2>
----

<1> `List<String>` for each vertex containing the first two locations.
<2> `Map<String, Object>` for each vertex, but containing only the first property value.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#limit-long-++[`limit(long)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#limit-org.apache.tinkerpop.gremlin.process.traversal.Scope-long-++[`limit(Scope,long)`]
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/Scope.html++[`Scope`]

[[local-step]]
=== Local Step

image::local-step.png[width=450]

A `GraphTraversal` operates on a continuous stream of objects. In many situations, it is important to operate on a
single element within that stream. To do such object-local traversal computations, `local()`-step exists (*branch*).
Note that the examples below use the <<the-crew-toy-graph,The Crew>> toy data set.

[gremlin-groovy,theCrew]
----
g.V().as('person').
      properties('location').order().by('startTime',asc).limit(2).value().as('location').
      select('person','location').by('name').by() <1>
g.V().as('person').
      local(properties('location').order().by('startTime',asc).limit(2)).value().as('location').
      select('person','location').by('name').by() <2>
----

<1> Get the first two people and their respective location according to the most historic location start time.
<2> For every person, get their two most historic locations.

The two traversals above look nearly identical save the inclusion of `local()` which wraps a section of the traversal
in a object-local traversal. As such, the `order().by()` and the `limit()` refer to a particular object, not to the
stream as a whole.

Local Step is quite similar in functionality to <<general-steps,Flat Map Step>> where it can often be confused.
`local()` propagates the traverser through the internal traversal as is without splitting/cloning it. Thus, its
a “global traversal” with local processing. Its use is subtle and primarily finds application in compilation
optimizations (i.e. when writing `TraversalStrategy` implementations. As another example consider:

[gremlin-groovy,modern]
----
g.V().both().barrier().flatMap(groupCount().by("name"))
g.V().both().barrier().local(groupCount().by("name"))
----

WARNING: The anonymous traversal of `local()` processes the current object "locally." In OLAP, where the atomic unit
of computing is the vertex and its local "star graph," it is important that the anonymous traversal does not leave
the confines of the vertex's star graph. In other words, it can not traverse to an adjacent vertex's properties or edges.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#local-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`local(Traversal)`]

[[loops-step]]
=== Loops Step

The `loops()`-step (*map*) extracts the number of times the `Traverser` has gone through the current loop.

[gremlin-groovy,modern]
----
g.V().emit(__.has("name", "marko").or().loops().is(2)).repeat(__.out()).values("name")
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#loops--++[`loops()`]

[[match-step]]
=== Match Step

The `match()`-step (*map*) provides a more link:http://en.wikipedia.org/wiki/Declarative_programming[declarative]
form of graph querying based on the notion of link:http://en.wikipedia.org/wiki/Pattern_matching[pattern matching].
With `match()`, the user provides a collection of "traversal fragments," called patterns, that have variables defined
that must hold true throughout the duration of the `match()`. When a traverser is in `match()`, a registered
`MatchAlgorithm` analyzes the current state of the traverser (i.e. its history based on its
<<path-data-structure,path data>>), the runtime statistics of the traversal patterns, and returns a traversal-pattern
that the traverser should try next. The default `MatchAlgorithm` provided is called `CountMatchAlgorithm` and it
dynamically revises the pattern execution plan by sorting the patterns according to their filtering capabilities
(i.e. largest set reduction patterns execute first). For very large graphs, where the developer is uncertain of the
statistics of the graph (e.g. how many `knows`-edges vs. `worksFor`-edges exist in the graph), it is advantageous to
use `match()`, as an optimal plan will be determined automatically. Furthermore, some queries are much easier to
express via `match()` than with single-path traversals.

    "Who created a project named 'lop' that was also created by someone who is 29 years old? Return the two creators."

image::match-step.png[width=500]

[gremlin-groovy,modern]
----
g.V().match(
        __.as('a').out('created').as('b'),
        __.as('b').has('name', 'lop'),
        __.as('b').in('created').as('c'),
        __.as('c').has('age', 29)).
      select('a','c').by('name')
----

Note that the above can also be more concisely written as below which demonstrates that standard inner-traversals can
be arbitrarily defined.

[gremlin-groovy,modern]
----
g.V().match(
        __.as('a').out('created').has('name', 'lop').as('b'),
        __.as('b').in('created').has('age', 29).as('c')).
      select('a','c').by('name')
----

In order to improve readability, `as()`-steps can be given meaningful labels which better reflect your domain. The
previous query can thus be written in a more expressive way as shown below.

[gremlin-groovy,modern]
----
g.V().match(
        __.as('creators').out('created').has('name', 'lop').as('projects'), <1>
        __.as('projects').in('created').has('age', 29).as('cocreators')). <2>
      select('creators','cocreators').by('name') <3>
----

<1> Find vertices that created something and match them as 'creators', then find out what they created which is
named 'lop' and match these vertices as 'projects'.
<2> Using these 'projects' vertices, find out their creators aged 29 and remember these as 'cocreators'.
<3> Return the name of both 'creators' and 'cocreators'.

[[grateful-dead]]
.Grateful Dead
image::grateful-dead-schema.png[width=475]

`MatchStep` brings functionality similar to link:http://en.wikipedia.org/wiki/SPARQL[SPARQL] to Gremlin. Like SPARQL,
MatchStep conjoins a set of patterns applied to a graph.  For example, the following traversal finds exactly those
songs which Jerry Garcia has both sung and written (using the Grateful Dead graph distributed in the `data/` directory):

[gremlin-groovy]
----
graph.io(graphml()).readGraph('data/grateful-dead.xml')
g = graph.traversal()
g.V().match(
        __.as('a').has('name', 'Garcia'),
        __.as('a').in('writtenBy').as('b'),
        __.as('a').in('sungBy').as('b')).
      select('b').values('name')
----

Among the features which differentiate `match()` from SPARQL are:

[gremlin-groovy,modern]
----
g.V().match(
        __.as('a').out('created').has('name','lop').as('b'), <1>
        __.as('b').in('created').has('age', 29).as('c'),
        __.as('c').repeat(out()).times(2)). <2>
      select('c').out('knows').dedup().values('name') <3>
----

<1> *Patterns of arbitrary complexity*: `match()` is not restricted to triple patterns or property paths.
<2> *Recursion support*: `match()` supports the branch-based steps within a pattern, including `repeat()`.
<3> *Imperative/declarative hybrid*: Before and after a `match()`, it is possible to leverage classic Gremlin traversals.

To extend point #3, it is possible to support going from imperative, to declarative, to imperative, ad infinitum.

[gremlin-groovy,modern]
----
g.V().match(
        __.as('a').out('knows').as('b'),
        __.as('b').out('created').has('name','lop')).
      select('b').out('created').
        match(
          __.as('x').in('created').as('y'),
          __.as('y').out('knows').as('z')).
      select('z').values('name')
----

IMPORTANT: The `match()`-step is stateless. The variable bindings of the traversal patterns are stored in the path
history of the traverser. As such, the variables used over all `match()`-steps within a traversal are globally unique.
A benefit of this is that subsequent `where()`, `select()`, `match()`, etc. steps can leverage the same variables in
their analysis.

Like all other steps in Gremlin, `match()` is a function and thus, `match()` within `match()` is a natural consequence
of Gremlin's functional foundation (i.e. recursive matching).

[gremlin-groovy,modern]
----
g.V().match(
        __.as('a').out('knows').as('b'),
        __.as('b').out('created').has('name','lop'),
        __.as('b').match(
                     __.as('b').out('created').as('c'),
                     __.as('c').has('name','ripple')).
                   select('c').as('c')).
      select('a','c').by('name')
----

If a step-labeled traversal proceeds the `match()`-step and the traverser entering the `match()` is destined to bind
to a particular variable, then the previous step should be labeled accordingly.

[gremlin-groovy,modern]
----
g.V().as('a').out('knows').as('b').
  match(
    __.as('b').out('created').as('c'),
    __.not(__.as('c').in('created').as('a'))).
  select('a','b','c').by('name')
----

There are three types of `match()` traversal patterns.

  . `as('a')...as('b')`: both the start and end of the traversal have a declared variable.
  . `as('a')...`: only the start of the traversal has a declared variable.
  . `...`: there are no declared variables.

If a variable is at the start of a traversal pattern it *must* exist as a label in the path history of the traverser
else the traverser can not go down that path. If a variable is at the end of a traversal pattern then if the variable
exists in the path history of the traverser, the traverser's current location *must* match (i.e. equal) its historic
location at that same label. However, if the variable does not exist in the path history of the traverser, then the
current location is labeled as the variable and thus, becomes a bound variable for subsequent traversal patterns. If a
traversal pattern does not have an end label, then the traverser must simply "survive" the pattern (i.e. not be
filtered) to continue to the next pattern. If a traversal pattern does not have a start label, then the traverser
can go down that path at any point, but will only go down that pattern once as a traversal pattern is executed once
and only once for the history of the traverser. Typically, traversal patterns that do not have a start and end label
are used in conjunction with `and()`, `or()`, and `where()`. Once the traverser has "survived" all the patterns (or at
least one for `or()`), `match()`-step analyzes the traverser's path history and emits a `Map<String,Object>` of the
variable bindings to the next step in the traversal.

[gremlin-groovy,modern]
----
g.V().as('a').out().as('b'). <1>
    match( <2>
      __.as('a').out().count().as('c'), <3>
      __.not(__.as('a').in().as('b')), <4>
      or( <5>
        __.as('a').out('knows').as('b'),
        __.as('b').in().count().as('c').and().as('c').is(gt(2)))).  <6>
    dedup('a','c'). <7>
    select('a','b','c').by('name').by('name').by() <8>
----

<1> A standard, step-labeled traversal can come prior to `match()`.
<2> If the traverser's path prior to entering `match()` has requisite label values, then those historic values are bound.
<3> It is possible to use <<a-note-on-barrier-steps,barrier steps>> though they are computed locally to the pattern (as one would expect).
<4> It is possible to `not()` a pattern.
<5> It is possible to nest `and()`- and `or()`-steps for conjunction matching.
<6> Both infix and prefix conjunction notation is supported.
<7> It is possible to "distinct" the specified label combination.
<8> The bound values are of different types -- vertex ("a"), vertex ("b"), long ("c").

[[using-where-with-match]]
==== Using Where with Match

Match is typically used in conjunction with both `select()` (demonstrated previously) and `where()` (presented here).
A `where()`-step allows the user to further constrain the result set provided by `match()`.

[gremlin-groovy,modern]
----
g.V().match(
        __.as('a').out('created').as('b'),
        __.as('b').in('created').as('c')).
        where('a', neq('c')).
      select('a','c').by('name')
----

The `where()`-step can take either a `P`-predicate (example above) or a `Traversal` (example below). Using
`MatchPredicateStrategy`, `where()`-clauses are automatically folded into `match()` and thus, subject to the query
optimizer within `match()`-step.

[gremlin-groovy,modern]
----
traversal = g.V().match(
                    __.as('a').has(label,'person'), <1>
                    __.as('a').out('created').as('b'),
                    __.as('b').in('created').as('c')).
                    where(__.as('a').out('knows').as('c')). <2>
                  select('a','c').by('name'); null <3>
traversal.toString() <4>
traversal <5> <6>
traversal.toString() <7>
----

<1> Any `has()`-step traversal patterns that start with the match-key are pulled out of `match()` to enable the graph
system to leverage the filter for index lookups.
<2> A `where()`-step with a traversal containing variable bindings declared in `match()`.
<3> A useful trick to ensure that the traversal is not iterated by Gremlin Console.
<4> The string representation of the traversal prior to its strategies being applied.
<5> The Gremlin Console will automatically iterate anything that is an iterator or is iterable.
<6> Both marko and josh are co-developers and marko knows josh.
<7> The string representation of the traversal after the strategies have been applied (and thus, `where()` is folded into `match()`)

IMPORTANT: A `where()`-step is a filter and thus, variables within a `where()` clause are not globally bound to the
path of the traverser in `match()`. As such, `where()`-steps in `match()` are used for filtering, not binding.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#match-org.apache.tinkerpop.gremlin.process.traversal.Traversal...-++[`match(Traversal...)`]

[[math-step]]
=== Math Step

The `math()`-step (*math*) enables scientific calculator functionality within Gremlin. This step deviates from the common
function composition and nesting formalisms to provide an easy to read string-based math processor. Variables within the
equation map to scopes in Gremlin -- e.g. path labels, side-effects, or incoming map keys. This step supports
`by()`-modulation where the `by()`-modulators are applied in the order in which the variables are first referenced
within the equation. Note that the reserved variable `_` refers to the current numeric traverser object incoming to the
`math()`-step.

[gremlin-groovy,modern]
----
g.V().as('a').out('knows').as('b').math('a + b').by('age')
g.V().as('a').out('created').as('b').
  math('b + a').
    by(both().count().math('_ + 100')).
    by('age')
g.withSideEffect('x',10).V().values('age').math('_ / x')
g.withSack(1).V(1).repeat(sack(sum).by(constant(1))).times(10).emit().sack().math('sin _')
----

The operators supported by the calculator include: `*`, `+`, `/`, `^`, and `%`. Furthermore, the following built in
functions are provided:

* `abs`: absolute value
* `acos`: arc cosine
* `asin`: arc sine
* `atan`: arc tangent
* `cbrt`: cubic root
* `ceil`: nearest upper integer
* `cos`: cosine
* `cosh`: hyperbolic cosine
* `exp`: euler's number raised to the power (`e^x`)
* `floor`: nearest lower integer
* `log`: logarithmus naturalis (base e)
* `log10`: logarithm (base 10)
* `log2`: logarithm (base 2)
* `sin`: sine
* `sinh`: hyperbolic sine
* `sqrt`: square root
* `tan`: tangent
* `tanh`: hyperbolic tangent
* `signum`: signum function

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#math-java.lang.String-++[`math(String)`]

[[max-step]]
=== Max Step

The `max()`-step (*map*) operates on a stream of numbers and determines which is the largest number in the stream.

[gremlin-groovy,modern]
----
g.V().values('age').max()
g.V().repeat(both()).times(3).values('age').max()
----

IMPORTANT: `max(local)` determines the max of the current, local object (not the objects in the traversal stream).
This works for `Collection` and `Number`-type objects. For any other object, a max of `Double.NaN` is returned.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#max--++[`max()`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#max-org.apache.tinkerpop.gremlin.process.traversal.Scope-++[`max(Scope)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/Scope.html++[`Scope`]

[[mean-step]]
=== Mean Step

The `mean()`-step (*map*) operates on a stream of numbers and determines the average of those numbers.

[gremlin-groovy,modern]
----
g.V().values('age').mean()
g.V().repeat(both()).times(3).values('age').mean() <1>
g.V().repeat(both()).times(3).values('age').dedup().mean()
----

<1> Realize that traversers are being bulked by `repeat()`. There may be more of a particular number than another,
thus altering the average.

IMPORTANT: `mean(local)` determines the mean of the current, local object (not the objects in the traversal stream).
This works for `Collection` and `Number`-type objects. For any other object, a mean of `Double.NaN` is returned.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#mean--++[`mean()`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#mean-org.apache.tinkerpop.gremlin.process.traversal.Scope-++[`mean(Scope)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/Scope.html++[`Scope`]

[[min-step]]
=== Min Step

The `min()`-step (*map*) operates on a stream of numbers and determines which is the smallest number in the stream.

[gremlin-groovy,modern]
----
g.V().values('age').min()
g.V().repeat(both()).times(3).values('age').min()
----

IMPORTANT: `min(local)` determines the min of the current, local object (not the objects in the traversal stream).
This works for `Collection` and `Number`-type objects. For any other object, a min of `Double.NaN` is returned.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#min--++[`min()`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#min-org.apache.tinkerpop.gremlin.process.traversal.Scope-++[`min(Scope)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/Scope.html++[`Scope`]

[[none-step]]
=== None Step

The `none()`-step (*filter*) filters all objects from a traversal stream. It is especially useful for to traversals
that are executed remotely where returning results is not useful and the traversal is only meant to generate
side-effects. Choosing not to return results saves in serialization and network costs as the objects are filtered on
the remote end and not returned to the client side. Typically, this step does not need to be used directly and is
quietly used by the `iterate()` terminal step which appends `none()` to the traversal before actually cycling through
results.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/current/core/org/apache/tinkerpop/gremlin/process/traversal/Traversal.html#none--++[`none()`]
link:++https://tinkerpop.apache.org/javadocs/current/core/org/apache/tinkerpop/gremlin/process/traversal/Traversal.html#iterate--++[`iterate()`]

[[not-step]]
=== Not Step

The `not()`-step (*filter*) removes objects from the traversal stream when the traversal provided as an argument
returns an object.

[NOTE, caption=Groovy]
====
The term `not` is a reserved word in Groovy, and when therefore used as part of an anonymous traversal must be referred
to in Gremlin with the double underscore `+__.not()+`.
====

[NOTE, caption=Python]
====
The term `not` is a reserved word in Python, and therefore must be referred to in Gremlin with `not_()`.
====

[gremlin-groovy,modern]
----
g.V().not(hasLabel('person')).valueMap(true)
g.V().hasLabel('person').
  not(out('created').count().is(gt(1))).values('name')   <1>
----

<1> josh created two projects and vadas none

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#not-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`not(Traversal)`]

[[option-step]]
=== Option Step

An option to a <<general-steps,`branch()`>> or <<choose-step,`choose()`>>.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#option-M-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`option(Object,Traversal)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#option-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`option(Traversal)`]

[[optional-step]]
=== Optional Step

The `optional()`-step (*branch/flatMap*) returns the result of the specified traversal if it yields a result else it returns the calling
element, i.e. the `identity()`.

[gremlin-groovy,modern]
----
g.V(2).optional(out('knows')) <1>
g.V(2).optional(__.in('knows')) <2>
----

<1> vadas does not have an outgoing knows-edge so vadas is returned.
<2> vadas does have an incoming knows-edge so marko is returned.

`optional` is particularly useful for lifting entire graphs when used in conjunction with `path` or `tree`.

[gremlin-groovy,modern]
----
g.V().hasLabel('person').optional(out('knows').optional(out('created'))).path() <1>
----

<1> Returns the paths of everybody followed by who they know followed by what they created.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#optional-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`optional(Traversal)`]

[[or-step]]
=== Or Step

The `or()`-step ensures that at least one of the provided traversals yield a result (*filter*). Please see
<<and-step,`and()`>> for and-semantics.

[NOTE, caption=Python]
====
The term `or` is a reserved word in Python, and therefore must be referred to in Gremlin with `or_()`.
====

[gremlin-groovy,modern]
----
g.V().or(
   __.outE('created'),
   __.inE('created').count().is(gt(1))).
     values('name')
----

The `or()`-step can take an arbitrary number of traversals. At least one of the traversals must produce at least one
output for the original traverser to pass to the next step.

An link:http://en.wikipedia.org/wiki/Infix_notation[infix notation] can be used as well. Though, with infix notation,
only two traversals can be or'd together.

[gremlin-groovy,modern]
----
g.V().where(outE('created').or().outE('knows')).values('name')
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#or-org.apache.tinkerpop.gremlin.process.traversal.Traversal...-++[`or(Traversal...)`]

[[order-step]]
=== Order Step

When the objects of the traversal stream need to be sorted, `order()`-step (*map*) can be leveraged.

[gremlin-groovy,modern]
----
g.V().values('name').order()
g.V().values('name').order().by(desc)
g.V().hasLabel('person').order().by('age', asc).values('name')
----

One of the most traversed objects in a traversal is an `Element`. An element can have properties associated with it
(i.e. key/value pairs). In many situations, it is desirable to sort an element traversal stream according to a
comparison of their properties.

[gremlin-groovy,modern]
----
g.V().values('name')
g.V().order().by('name',asc).values('name')
g.V().order().by('name',desc).values('name')
----

The `order()`-step allows the user to provide an arbitrary number of comparators for primary, secondary, etc. sorting.
In the example below, the primary ordering is based on the outgoing created-edge count. The secondary ordering is
based on the age of the person.

[gremlin-groovy,modern]
----
g.V().hasLabel('person').order().by(outE('created').count(), asc).
                                 by('age', asc).values('name')
g.V().hasLabel('person').order().by(outE('created').count(), asc).
                                 by('age', desc).values('name')
----

Randomizing the order of the traversers at a particular point in the traversal is possible with `Order.shuffle`.

[gremlin-groovy,modern]
----
g.V().hasLabel('person').order().by(shuffle)
g.V().hasLabel('person').order().by(shuffle)
----

It is possible to use `order(local)` to order the current local object and not the entire traversal stream. This works for
`Collection`- and `Map`-type objects. For any other object, the object is returned unchanged.

[gremlin-groovy,modern]
----
g.V().values('age').fold().order(local).by(desc) <1>
g.V().values('age').order(local).by(desc) <2>
g.V().groupCount().by(inE().count()).order(local).by(values, desc) <3>
g.V().groupCount().by(inE().count()).order(local).by(keys, asc) <4>
----

<1> The ages are gathered into a list and then that list is sorted in decreasing order.
<2> The ages are not gathered and thus `order(local)` is "ordering" single integers and thus, does nothing.
<3> The `groupCount()` map is ordered by its values in decreasing order.
<4> The `groupCount()` map is ordered by its keys in increasing order.

NOTE: The `values` and `keys` enums are from `Column` which is used to select "columns" from a `Map`, `Map.Entry`, or `Path`.

NOTE: Prior to version 3.3.4, ordering was defined by `Order.incr` for ascending order and `Order.decr` for descending
order. That approach is now deprecated with the preferred method shown in the examples which uses the more common
forms for query languages in `Order.asc` and Order.desc.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#order--++[`order()`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#order-org.apache.tinkerpop.gremlin.process.traversal.Scope-++[`order(Scope)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/Scope.html++[`Scope`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/Order.html++[`Order`]

[[pagerank-step]]
=== PageRank Step

The `pageRank()`-step (*map*/*sideEffect*) calculates link:http://en.wikipedia.org/wiki/PageRank[PageRank] using <<pagerankvertexprogram,`PageRankVertexProgram`>>.

IMPORTANT: The `pageRank()`-step is a `VertexComputing`-step and as such, can only be used against a graph that supports `GraphComputer` (OLAP).

[gremlin-groovy,modern]
----
g = graph.traversal().withComputer()
g.V().pageRank().by('pageRank').values('pageRank')
g.V().hasLabel('person').
  pageRank().
    by(outE('knows')).
    by('friendRank').
  order().by('friendRank',desc).valueMap('name','friendRank')
----

The <<explain-step,`explain()`>>-step can be used to understand how the traversal is compiled into multiple `GraphComputer` jobs.

[gremlin-groovy,modern]
----
g = graph.traversal().withComputer()
g.V().hasLabel('person').
  pageRank().
    by(outE('knows')).
    by('friendRank').
  order().by('friendRank',desc).valueMap('name','friendRank').explain()
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#pageRank--++[`pageRank()`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#pageRank-double-++[`pageRank(double)`]

[[path-step]]
=== Path Step

A traverser is transformed as it moves through a series of steps within a traversal. The history of the traverser is
realized by examining its path with `path()`-step (*map*).

image::path-step.png[width=650]

[gremlin-groovy,modern]
----
g.V().out().out().values('name')
g.V().out().out().values('name').path()
----

If edges are required in the path, then be sure to traverser those edges explicitly.

[gremlin-groovy,modern]
----
g.V().outE().inV().outE().inV().path()
----

It is possible to post-process the elements of the path in a round-robin fashion via `by()`.

[gremlin-groovy,modern]
----
g.V().out().out().path().by('name').by('age')
----

Finally, because `by()`-based post-processing, nothing prevents triggering yet another traversal. In the traversal
below, for each element of the path traversed thus far, if its a person (as determined by having an `age`-property),
then get all of their creations, else if its a creation, get all the people that created it.

[gremlin-groovy,modern]
----
g.V().out().out().path().by(
                   choose(hasLabel('person'),
                                 out('created').values('name'),
                                 __.in('created').values('name')).fold())
----

WARNING: Generating path information is expensive as the history of the traverser is stored into a Java list. With
numerous traversers, there are numerous lists. Moreover, in an OLAP <<graphcomputer,`GraphComputer`>> environment
this becomes exceedingly prohibitive as there are traversers emanating from all vertices in the graph in parallel.
In OLAP there are optimizations provided for traverser populations, but when paths are calculated (and each traverser
is unique due to its history), then these optimizations are no longer possible.

[[path-data-structure]]
==== Path Data Structure

The `Path` data structure is an ordered list of objects, where each object is associated to a `Set<String>` of
labels. An example is presented below to demonstrate both the `Path` API as well as how a traversal yields labeled paths.

image::path-data-structure.png[width=350]

[gremlin-groovy,modern]
----
path = g.V(1).as('a').has('name').as('b').
              out('knows').out('created').as('c').
              has('name','ripple').values('name').as('d').
              identity().as('e').path().next()
path.size()
path.objects()
path.labels()
path.a
path.b
path.c
path.d == path.e
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#path--++[`path()`]

[[peerpressure-step]]
=== PeerPressure Step

The `peerPressure()`-step (*map*/*sideEffect*) clusters vertices using <<peerpressurevertexprogram,`PeerPressureVertexProgram`>>.

IMPORTANT: The `peerPressure()`-step is a `VertexComputing`-step and as such, can only be used against a graph that supports `GraphComputer` (OLAP).

[gremlin-groovy,modern]
----
g = graph.traversal().withComputer()
g.V().peerPressure().by('cluster').values('cluster')
g.V().hasLabel('person').
  peerPressure().by('cluster').
  group().by('cluster').by('name')
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#peerPressure--++[`peerPressure()`]

[[profile-step]]
=== Profile Step

The `profile()`-step (*sideEffect*) exists to allow developers to profile their traversals to determine statistical
information like step runtime, counts, etc.

WARNING: Profiling a Traversal will impede the Traversal's performance. This overhead is mostly excluded from the
profile results, but durations are not exact. Thus, durations are best considered in relation to each other.

[gremlin-groovy,modern]
----
g.V().out('created').repeat(both()).times(3).hasLabel('person').values('age').sum().profile()
----

The `profile()`-step generates a `TraversalMetrics` sideEffect object that contains the following information:

* `Step`: A step within the traversal being profiled.
* `Count`: The number of _represented_ traversers that passed through the step.
* `Traversers`: The number of traversers that passed through the step.
* `Time (ms)`: The total time the step was actively executing its behavior.
* `% Dur`: The percentage of total time spent in the step.

image:gremlin-exercise.png[width=120,float=left] It is important to understand the difference between "Count"
and "Traversers". Traversers can be merged and as such, when two traversers are "the same" they may be aggregated
into a single traverser. That new traverser has a `Traverser.bulk()` that is the sum of the two merged traverser
bulks. On the other hand, the `Count` represents the sum of all `Traverser.bulk()` results and thus, expresses the
number of "represented" (not enumerated) traversers. `Traversers` will always be less than or equal to `Count`.

For traversal compilation information, please see <<explain-step,`explain()`>>-step.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#profile--++[`profile()`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#profile-java.lang.String-++[`profile(String)`]

[[project-step]]
=== Project Step

The `project()`-step (*map*) projects the current object into a `Map<String,Object>` keyed by provided labels. It is similar
to <<select-step,`select()`>>-step, save that instead of retrieving and modulating historic traverser state, it modulates
the current state of the traverser.

[gremlin-groovy,modern]
----
g.V().out('created').
  project('a','b').
    by('name').
    by(__.in('created').count()).
  order().by(select('b'),desc).
  select('a')
g.V().has('name','marko').
               project('out','in').
                 by(outE().count()).
                 by(inE().count())
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#project-java.lang.String-java.lang.String...-++[`project(String,String...)`]

[[program-step]]
=== Program Step

The `program()`-step (*map*/*sideEffect*) is the "lambda" step for `GraphComputer` jobs. The step takes a
<<vertexprogram,`VertexProgram`>> as an argument and will process the incoming graph accordingly. Thus, the user
can create their own `VertexProgram` and have it execute within a traversal. The configuration provided to the
vertex program includes:

* `gremlin.vertexProgramStep.rootTraversal` is a serialization of a `PureTraversal` form of the root traversal.
* `gremlin.vertexProgramStep.stepId` is the step string id of the `program()`-step being executed.

The user supplied `VertexProgram` can leverage that information accordingly within their vertex program. Example uses
are provided below.

WARNING: Developing a `VertexProgram` is for expert users. Moreover, developing one that can be used effectively within
a traversal requires yet more expertise. This information is recommended to advanced users with a deep understanding of the
mechanics of Gremlin OLAP (<<graphcomputer,`GraphComputer`>>).

[source,java]
----
private TraverserSet<Object> haltedTraversers;

public void loadState(Graph graph, Configuration configuration) {
  VertexProgram.super.loadState(graph, configuration);
  this.traversal = PureTraversal.loadState(configuration, VertexProgramStep.ROOT_TRAVERSAL, graph);
  this.programStep = new TraversalMatrix<>(this.traversal.get()).getStepById(configuration.getString(ProgramVertexProgramStep.STEP_ID));
  // if the traversal sideEffects will be used in the computation, add them as memory compute keys
  this.memoryComputeKeys.addAll(MemoryTraversalSideEffects.getMemoryComputeKeys(this.traversal.get()));
  // if master-traversal traversers may be propagated, create a memory compute key
  this.memoryComputeKeys.add(MemoryComputeKey.of(TraversalVertexProgram.HALTED_TRAVERSERS, Operator.addAll, false, false));
  // returns an empty traverser set if there are no halted traversers
  this.haltedTraversers = TraversalVertexProgram.loadHaltedTraversers(configuration);
}

public void storeState(Configuration configuration) {
  VertexProgram.super.storeState(configuration);
  // if halted traversers is null or empty, it does nothing
  TraversalVertexProgram.storeHaltedTraversers(configuration, this.haltedTraversers);
}

public void setup(Memory memory) {
  if(!this.haltedTraversers.isEmpty()) {
    // do what you like with the halted master traversal traversers
  }
  // once used, no need to keep that information around (master)
  this.haltedTraversers = null;
}

public void execute(Vertex vertex, Messenger messenger, Memory memory) {
  // once used, no need to keep that information around (workers)
  if(null != this.haltedTraversers)
    this.haltedTraversers = null;
  if(vertex.property(TraversalVertexProgram.HALTED_TRAVERSERS).isPresent()) {
    // haltedTraversers in execute() represent worker-traversal traversers
    // for example, from a traversal of the form g.V().out().program(...)
    TraverserSet<Object> haltedTraversers = vertex.value(TraversalVertexProgram.HALTED_TRAVERSERS);
    // create a new halted traverser set that can be used by the next OLAP job in the chain
    // these are worker-traversers that are distributed throughout the graph
    TraverserSet<Object> newHaltedTraversers = new TraverserSet<>();
    haltedTraversers.forEach(traverser -> {
       newHaltedTraversers.add(traverser.split(traverser.get().toString(), this.programStep));
    });
    vertex.property(VertexProperty.Cardinality.single, TraversalVertexProgram.HALTED_TRAVERSERS, newHaltedTraversers);
    // it is possible to create master-traversers that are localized to the master traversal (this is how results are ultimately delivered back to the user)
    memory.add(TraversalVertexProgram.HALTED_TRAVERSERS,
               new TraverserSet<>(this.traversal().get().getTraverserGenerator().generate("an example", this.programStep, 1l)));
  }

public boolean terminate(Memory memory) {
  // the master-traversal will have halted traversers
  assert memory.exists(TraversalVertexProgram.HALTED_TRAVERSERS);
  TraverserSet<String> haltedTraversers = memory.get(TraversalVertexProgram.HALTED_TRAVERSERS);
  // it will only have the traversers sent to the master traversal via memory
  assert haltedTraversers.stream().map(Traverser::get).filter(s -> s.equals("an example")).findAny().isPresent();
  // it will not contain the worker traversers distributed throughout the vertices
  assert !haltedTraversers.stream().map(Traverser::get).filter(s -> !s.equals("an example")).findAny().isPresent();
  return true;
}
----

NOTE: The test case `ProgramTest` in `gremlin-test` has an example vertex program called `TestProgram` that demonstrates
all the various ways in which traversal and traverser information is propagated within a vertex program and ultimately
usable by other vertex programs (including `TraversalVertexProgram`) down the line in an OLAP compute chain.

Finally, an example is provided using `PageRankVertexProgram` which doesn't use <<pagerank-step,`pageRank()`>>-step.

[gremlin-groovy,modern]
----
g = graph.traversal().withComputer()
g.V().hasLabel('person').
  program(PageRankVertexProgram.build().property('rank').create(graph)).
    order().by('rank', asc).
  valueMap('name', 'rank')
----

[[properties-step]]
=== Properties Step

The `properties()`-step (*map*) extracts properties from an `Element` in the traversal stream.

[gremlin-groovy,theCrew]
----
g.V(1).properties()
g.V(1).properties('location').valueMap()
g.V(1).properties('location').has('endTime').valueMap()
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#properties-java.lang.String...-++[`properties(String...)`]

[[propertymap-step]]
=== PropertyMap Step

The `propertiesMap()`-step yields a Map representation of the properties of an element.

[gremlin-groovy,modern]
----
g.V().propertyMap()
g.V().propertyMap('age')
g.V().propertyMap('age','blah')
g.E().propertyMap()
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#propertyMap-java.lang.String...-++[`propertyMap(String...)`]

[[range-step]]
=== Range Step

As traversers propagate through the traversal, it is possible to only allow a certain number of them to pass through
with `range()`-step (*filter*). When the low-end of the range is not met, objects are continued to be iterated. When
within the low (inclusive) and high (exclusive) range, traversers are emitted. When above the high range, the traversal
breaks out of iteration. Finally, the use of `-1` on the high range will emit remaining traversers after the low range
begins.

[gremlin-groovy,modern]
----
g.V().range(0,3)
g.V().range(1,3)
g.V().range(1, -1)
g.V().repeat(both()).times(1000000).emit().range(6,10)
----

The `range()`-step can also be applied with `Scope.local`, in which case it operates on the incoming collection.
For example, it is possible to produce a `Map<String, String>` for each traversed path, but containing only the second
property value (the "b" step).

[gremlin-groovy,modern]
----
g.V().as('a').out().as('b').in().as('c').select('a','b','c').by('name').range(local,1,2)
----

The next example uses the <<the-crew-toy-graph,The Crew>> toy data set.  It produces a `List<String>` containing the
second and third location for each vertex.

[gremlin-groovy,theCrew]
----
g.V().valueMap().select('location').range(local, 1, 3)
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#range-long-long-++[`range(long,long)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#range-org.apache.tinkerpop.gremlin.process.traversal.Scope-long-long-++[`range(Scope,long,long)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/Scope.html++[`Scope`]

[[repeat-step]]
=== Repeat Step

image::gremlin-fade.png[width=350]

The `repeat()`-step (*branch*) is used for looping over a traversal given some break predicate. Below are some
examples of `repeat()`-step in action.

[gremlin-groovy,modern]
----
g.V(1).repeat(out()).times(2).path().by('name') <1>
g.V().until(has('name','ripple')).
      repeat(out()).path().by('name') <2>
----

<1> do-while semantics stating to do `out()` 2 times.
<2> while-do semantics stating to break if the traverser is at a vertex named "ripple".

IMPORTANT: There are two modulators for `repeat()`: `until()` and `emit()`. If `until()` comes after `repeat()` it is
do/while looping. If `until()` comes before `repeat()` it is while/do looping. If `emit()` is placed after `repeat()`,
it is evaluated on the traversers leaving the repeat-traversal. If `emit()` is placed before `repeat()`, it is
evaluated on the traversers prior to entering the repeat-traversal.

The `repeat()`-step also supports an "emit predicate", where the predicate for an empty argument `emit()` is
`true` (i.e. `emit() == emit{true}`). With `emit()`, the traverser is split in two -- the traverser exits the code
block as well as continues back within the code block (assuming `until()` holds true).

[gremlin-groovy,modern]
----
g.V(1).repeat(out()).times(2).emit().path().by('name') <1>
g.V(1).emit().repeat(out()).times(2).path().by('name') <2>
----

<1> The `emit()` comes after `repeat()` and thus, emission happens after the `repeat()` traversal is executed. Thus,
no one vertex paths exist.
<2> The `emit()` comes before `repeat()` and thus, emission happens prior to the `repeat()` traversal being executed.
Thus, one vertex paths exist.

The `emit()`-modulator can take an arbitrary predicate.

[gremlin-groovy,modern]
----
g.V(1).repeat(out()).times(2).emit(has('lang')).path().by('name')
----

image::repeat-step.png[width=500]

[gremlin-groovy,modern]
----
g.V(1).repeat(out()).times(2).emit().path().by('name')
----

The first time through the `repeat()`, the vertices lop, vadas, and josh are seen. Given that `loops==1`, the
traverser repeats. However, because the emit-predicate is declared true, those vertices are emitted. The next time through
 `repeat()`, the vertices traversed are ripple and lop (Josh's created projects, as lop and vadas have no out edges).
  Given that `loops==2`, the until-predicate fails and ripple and lop are emitted.
Therefore, the traverser has seen the vertices: lop, vadas, josh, ripple, and lop.

Finally, note that both `emit()` and `until()` can take a traversal and in such, situations, the predicate is
determined by `traversal.hasNext()`. A few examples are provided below.

[gremlin-groovy,modern]
----
g.V(1).repeat(out()).until(hasLabel('software')).path().by('name') <1>
g.V(1).emit(hasLabel('person')).repeat(out()).path().by('name') <2>
g.V(1).repeat(out()).until(outE().count().is(0)).path().by('name') <3>
----

<1> Starting from vertex 1, keep taking outgoing edges until a software vertex is reached.
<2> Starting from vertex 1, and in an infinite loop, emit the vertex if it is a person and then traverser the outgoing edges.
<3> Starting from vertex 1, keep taking outgoing edges until a vertex is reached that has no more outgoing edges.

WARNING: The anonymous traversal of `emit()` and `until()` (not `repeat()`) process their current objects "locally."
In OLAP, where the atomic unit of computing is the vertex and its local "star graph," it is important that the
anonymous traversals do not leave the confines of the vertex's star graph. In other words, they can not traverse to
an adjacent vertex's properties or edges.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#repeat-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`repeat(Traversal)`]

[[sack-step]]
=== Sack Step

image:gremlin-sacks-running.png[width=175,float=right] A traverser can contain a local data structure called a "sack".
The `sack()`-step is used to read and write sacks (*sideEffect* or *map*). Each sack of each traverser is created
when using `GraphTraversal.withSack(initialValueSupplier,splitOperator?,mergeOperator?)`.

* *Initial value supplier*: A `Supplier` providing the initial value of each traverser's sack.
* *Split operator*: a `UnaryOperator` that clones the traverser's sack when the traverser splits. If no split operator
is provided, then `UnaryOperator.identity()` is assumed.
* *Merge operator*: A `BinaryOperator` that unites two traverser's sack when they are merged. If no merge operator is
provided, then traversers with sacks can not be merged.

Two trivial examples are presented below to demonstrate the *initial value supplier*. In the first example below, a
traverser is created at each vertex in the graph (`g.V()`), with a 1.0 sack (`withSack(1.0f)`), and then the sack
value is accessed (`sack()`). In the second example, a random float supplier is used to generate sack values.

[gremlin-groovy,modern]
----
g.withSack(1.0f).V().sack()
rand = new Random()
g.withSack {rand.nextFloat()}.V().sack()
----

A more complicated initial value supplier example is presented below where the sack values are used in a running
computation and then emitted at the end of the traversal. When an edge is traversed, the edge weight is multiplied
by the sack value (`sack(mult).by('weight')`). Note that the <<by-step,`by()`>>-modulator can be any arbitrary traversal.

[gremlin-groovy,modern]
----
g.withSack(1.0f).V().repeat(outE().sack(mult).by('weight').inV()).times(2)
g.withSack(1.0f).V().repeat(outE().sack(mult).by('weight').inV()).times(2).sack()
g.withSack(1.0f).V().repeat(outE().sack(mult).by('weight').inV()).times(2).path().
      by().by('weight')
----

image:gremlin-sacks-standing.png[width=100,float=left] When complex objects are used (i.e. non-primitives), then a
*split operator* should be defined to ensure that each traverser gets a clone of its parent's sack. The first example
does not use a split operator and as such, the same map is propagated to all traversers (a global data structure). The
second example, demonstrates how `Map.clone()` ensures that each traverser's sack contains a unique, local sack.

[gremlin-groovy,modern]
----
g.withSack {[:]}.V().out().out().
      sack {m,v -> m[v.value('name')] = v.value('lang'); m}.sack() // BAD: single map
g.withSack {[:]}{it.clone()}.V().out().out().
      sack {m,v -> m[v.value('name')] = v.value('lang'); m}.sack() // GOOD: cloned map
----

NOTE: For primitives (i.e. integers, longs, floats, etc.), a split operator is not required as a primitives are
encoded in the memory address of the sack, not as a reference to an object.

If a *merge operator* is not provided, then traversers with sacks can not be bulked. However, in many situations,
merging the sacks of two traversers at the same location is algorithmically sound and good to provide so as to gain
the bulking optimization. In the examples below, the binary merge operator is `Operator.sum`. Thus, when two traverser
merge, their respective sacks are added together.

[gremlin-groovy,modern]
----
g.withSack(1.0d).V(1).out('knows').in('knows') <1>
g.withSack(1.0d).V(1).out('knows').in('knows').sack() <2>
g.withSack(1.0d, sum).V(1).out('knows').in('knows').sack() <3>
g.withSack(1.0d).V(1).local(outE('knows').barrier(normSack).inV()).in('knows').barrier() <4>
g.withSack(1.0d).V(1).local(outE('knows').barrier(normSack).inV()).in('knows').barrier().sack() <5>
g.withSack(1.0d,sum).V(1).local(outE('knows').barrier(normSack).inV()).in('knows').barrier().sack() <6>
g.withBulk(false).withSack(1.0f,sum).V(1).local(outE('knows').barrier(normSack).inV()).in('knows').barrier().sack() <7>
g.withBulk(false).withSack(1.0f).V(1).local(outE('knows').barrier(normSack).inV()).in('knows').barrier().sack()<8>

----

<1> We find vertex 1 twice because he knows two other people
<2> Without a merge operation the sack values are 1.0.
<3> When specifying `sum` as the merge operation, the sack values are 2.0 because of bulking
<4> Like 1, but using barrier internally
<5> The `local(...barrier(normSack)...)` ensures that all traversers leaving vertex 1 have an evenly distributed amount of the initial 1.0 "energy" (50-50), i.e. the sack is 0.5 on each result
<6> Like 3, but using `sum` as merge operator leads to the expected 1.0
<7> There is now a single traverser with bulk of 2 and sack of 1.0 and thus, setting `withBulk(false)`` yields the expected 1.0
<8> Like 7, but without the `sum` operator

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#sack--++[`sack()`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#sack-java.util.function.BiFunction-++[`sack(BiFunction)`]

[[sample-step]]
=== Sample Step

The `sample()`-step is useful for sampling some number of traversers previous in the traversal.

[gremlin-groovy,modern]
----
g.V().outE().sample(1).values('weight')
g.V().outE().sample(1).by('weight').values('weight')
g.V().outE().sample(2).by('weight').values('weight')
----

One of the more interesting use cases for `sample()` is when it is used in conjunction with <<local-step,`local()`>>.
The combination of the two steps supports the execution of link:http://en.wikipedia.org/wiki/Random_walk[random walks].
In the example below, the traversal starts are vertex 1 and selects one edge to traverse based on a probability
distribution generated by the weights of the edges. The output is always a single path as by selecting a single edge,
the traverser never splits and continues down a single path in the graph.

[gremlin-groovy,modern]
----
g.V(1).repeat(local(
         bothE().sample(1).by('weight').otherV()
       )).times(5)
g.V(1).repeat(local(
         bothE().sample(1).by('weight').otherV()
       )).times(5).path()
g.V(1).repeat(local(
         bothE().sample(1).by('weight').otherV()
       )).times(10).path()
----

As a clarification, note that in the above example `local()` is not strictly required as it only does the random walk
over a single vertex, but note what happens without it if multiple vertices are traversed:

[gremlin-groovy,modern]
----
g.V().repeat(bothE().sample(1).by('weight').otherV()).times(5).path()
----

The use of `local()` ensures that the traversal over `bothE()` occurs once per vertex traverser that passes through,
thus allowing one random walk per vertex.

[gremlin-groovy,modern]
----
g.V().repeat(local(bothE().sample(1).by('weight').otherV())).times(5).path()
----

So, while not strictly required, it is likely better to be explicit with the use of `local()` so that the proper intent
of the traversal is expressed.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#sample-int-++[`sample(int)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#sample-org.apache.tinkerpop.gremlin.process.traversal.Scope-int-++[`sample(Scope,int)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/Scope.html++[`Scope`]

[[select-step]]
=== Select Step

link:http://en.wikipedia.org/wiki/Functional_programming[Functional languages] make use of function composition and
lazy evaluation to create complex computations from primitive operations. This is exactly what `Traversal` does. One
of the differentiating aspects of Gremlin's data flow approach to graph processing is that the flow need not always go
"forward," but in fact, can go back to a previously seen area of computation. Examples include <<path-step,`path()`>>
as well as the `select()`-step (*map*). There are two general ways to use `select()`-step.

. Select labeled steps within a path (as defined by `as()` in a traversal).
. Select objects out of a `Map<String,Object>` flow (i.e. a sub-map).

The first use case is demonstrated via example below.

[gremlin-groovy,modern]
----
g.V().as('a').out().as('b').out().as('c') // no select
g.V().as('a').out().as('b').out().as('c').select('a','b','c')
g.V().as('a').out().as('b').out().as('c').select('a','b')
g.V().as('a').out().as('b').out().as('c').select('a','b').by('name')
g.V().as('a').out().as('b').out().as('c').select('a') <1>
----

<1> If the selection is one step, no map is returned.

When there is only one label selected, then a single object is returned. This is useful for stepping back in a
computation and easily moving forward again on the object reverted to.

[gremlin-groovy,modern]
----
g.V().out().out()
g.V().out().out().path()
g.V().as('x').out().out().select('x')
g.V().out().as('x').out().select('x')
g.V().out().out().as('x').select('x') // pointless
----

NOTE: When executing a traversal with `select()` on a standard traversal engine (i.e. OLTP), `select()` will do its
best to avoid calculating the path history and instead, will rely on a global data structure for storing the currently
selected object. As such, if only a subset of the path walked is required, `select()` should be used over the more
resource intensive <<path-step,`path()`>>-step.

When the set of keys or values (i.e. columns) of a path or map are needed, use `select(keys)` and `select(values)`,
respectively. This is especially useful when one is only interested in the top N elements in a `groupCount()`
ranking.

[gremlin-groovy]
----
graph.io(graphml()).readGraph('data/grateful-dead.xml')
g = graph.traversal()
g.V().hasLabel('song').out('followedBy').groupCount().by('name').
      order(local).by(values,desc).limit(local, 5)
g.V().hasLabel('song').out('followedBy').groupCount().by('name').
      order(local).by(values,desc).limit(local, 5).select(keys)
g.V().hasLabel('song').out('followedBy').groupCount().by('name').
      order(local).by(values,desc).limit(local, 5).select(keys).unfold()
----

Similarly, for extracting the values from a path or map.

[gremlin-groovy]
----
graph.io(graphml()).readGraph('data/grateful-dead.xml')
g = graph.traversal()
g.V().hasLabel('song').out('sungBy').groupCount().by('name') <1>
g.V().hasLabel('song').out('sungBy').groupCount().by('name').select(values) <2>
g.V().hasLabel('song').out('sungBy').groupCount().by('name').select(values).unfold().
      groupCount().order(local).by(values,desc).limit(local, 5) <3>
----

<1> Which artist sung how many songs?
<2> Get an anonymized set of song repertoire sizes.
<3> What are the 5 most common song repertoire sizes?

WARNING: Note that `by()`-modulation is not supported with `select(keys)` and `select(values)`.

There is also an option to supply a `Pop` operation to `select()` to manipulate `List` objects in the `Traverser`:

[gremlin-groovy,modern]
----
g.V(1).as("a").repeat(out().as("a")).times(2).select(first, "a")
g.V(1).as("a").repeat(out().as("a")).times(2).select(last, "a")
g.V(1).as("a").repeat(out().as("a")).times(2).select(all, "a")
----

In addition to the previously shown examples, where `select()` was used to select an element based on a static key, `select()` can also accept a traversal
that emits a key.

WARNING: Since the key used by `select(<traversal>)` cannot be determined at compile time, the `TraversalSelectStep` enables full path tracking.

[gremlin-groovy,modern]
----
g.withSideEffect("alias", ["marko":"okram"]).V().  <1>
  values("name").sack(assign).                     <2>
  optional(select("alias").select(sack()))         <3>
----

<1> Inject a name alias map and start the traversal from all vertices.
<2> Select all `name` values and store them as the current traverser's sack value.
<3> Optionally select the alias for the current name from the injected map.

[[using-where-with-select]]
==== Using Where with Select

Like <<match-step,`match()`>>-step, it is possible to use `where()`, as where is a filter that processes
`Map<String,Object>` streams.

[gremlin-groovy,modern]
----
g.V().as('a').out('created').in('created').as('b').select('a','b').by('name') <1>
g.V().as('a').out('created').in('created').as('b').
      select('a','b').by('name').where('a',neq('b')) <2>
g.V().as('a').out('created').in('created').as('b').
      select('a','b'). <3>
      where('a',neq('b')).
      where(__.as('a').out('knows').as('b')).
      select('a','b').by('name')
----

<1> A standard `select()` that generates a `Map<String,Object>` of variables bindings in the path (i.e. `a` and `b`)
for the sake of a running example.
<2> The `select().by('name')` projects each binding vertex to their name property value and `where()` operates to
ensure respective `a` and `b` strings are not the same.
<3> The first `select()` projects a vertex binding set. A binding is filtered if `a` vertex equals `b` vertex. A
binding is filtered if `a` doesn't know `b`. The second and final `select()` projects the name of the vertices.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#select-org.apache.tinkerpop.gremlin.structure.Column-++[`select(Column)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#select-org.apache.tinkerpop.gremlin.process.traversal.Pop-java.lang.String-++[`select(Pop,String)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#select-java.lang.String-++[`select(String)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#select-java.lang.String-java.lang.String-java.lang.String...-++[`select(String,String,String...)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#select-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`select(Traversal)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#select-org.apache.tinkerpop.gremlin.process.traversal.Pop-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`select(Pop,Traversal)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/structure/Column.html++[`Column`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/Pop.html++[`Pop`]

[[simplepath-step]]
=== SimplePath Step

image::simplepath-step.png[width=400]

When it is important that a traverser not repeat its path through the graph, `simplePath()`-step should be used
(*filter*). The <<path-data-structure,path>> information of the traverser is analyzed and if the path has repeated
objects in it, the traverser is filtered. If cyclic behavior is desired, see <<cyclicpath-step,`cyclicPath()`>>.

[gremlin-groovy,modern]
----
g.V(1).both().both()
g.V(1).both().both().simplePath()
g.V(1).both().both().simplePath().path()
g.V().out().as('a').out().as('b').out().as('c').
  simplePath().by(label).
  path()
g.V().out().as('a').out().as('b').out().as('c').
  simplePath().
    by(label).
    from('b').
    to('c').
  path().
    by('name')
----

By using the `from()` and `to()` modulators traversers can ensure that only certain sections of the path are acyclic.

[gremlin-groovy]
----
g.addV().property(id, 'A').as('a').
  addV().property(id, 'B').as('b').
  addV().property(id, 'C').as('c').
  addV().property(id, 'D').as('d').
  addE('link').from('a').to('b').
  addE('link').from('b').to('c').
  addE('link').from('c').to('d').iterate()
g.V('A').repeat(both().simplePath()).times(3).path()  <1>
g.V('D').repeat(both().simplePath()).times(3).path()  <2>
g.V('A').as('a').
  repeat(both().simplePath().from('a')).times(3).as('b').
  repeat(both().simplePath().from('b')).times(3).path()  <3>
----

<1> Traverse all acyclic 3-hop paths starting from vertex `A`
<2> Traverse all acyclic 3-hop paths starting from vertex `D`
<3> Traverse all acyclic 3-hop paths starting from vertex `A` and from there again all 3-hop paths. The second path may
cross the vertices from the first path.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#simplePath--++[`simplePath()`]

[[skip-step]]
=== Skip Step

The `skip()`-step is analogous to <<range-step,`range()`-step>> save that the higher end range is set to -1.

[gremlin-groovy,modern]
----
g.V().values('age').order()
g.V().values('age').order().skip(2)
g.V().values('age').order().range(2, -1)
----

The `skip()`-step can also be applied with `Scope.local`, in which case it operates on the incoming collection.

[gremlin-groovy,modern]
----
g.V().hasLabel('person').filter(outE('created')).as('p'). <1>
  map(out('created').values('name').fold()).
  project('person','primary','other').
    by(select('p').by('name')).
    by(limit(local, 1)). <2>
    by(skip(local, 1)) <3>
----

<1> For each person who created something...
<2> ...select the first project (random order) as `primary` and...
<3> ...select all other projects as `other`.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#skip-long-++[`skip(long)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#skip-org.apache.tinkerpop.gremlin.process.traversal.Scope-long-++[`skip(Scope,long)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/Scope.html++[`Scope`]

[[store-step]]
=== Store Step

When link:http://en.wikipedia.org/wiki/Lazy_evaluation[lazy] aggregation is needed, `store()`-step (*sideEffect*)
should be used over <<aggregate-step,`aggregate()`>>. The two steps differ in that `store()` does not block and only
stores objects in its side-effect collection as they pass through.

[gremlin-groovy,modern]
----
g.V().aggregate('x').limit(1).cap('x')                               
g.V().store('x').limit(1).cap('x')
g.withoutStrategies(EarlyLimitStrategy).V().store('x').limit(1).cap('x')
----

It is important to note that `EarlyLimitStrategy` introduced in 3.3.5 alters the behavior of `store()`. Without that
strategy (which is installed by default), there are two results in the `store()` side-effect even though the interval
selection is for 1 object. Realize that when the second object is on its way to the `range()` filter (i.e. `[0..1]`),
it passes through `store()` and thus, stored before filtered.

[gremlin-groovy,modern]
----
g.E().store('x').by('weight').cap('x')
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#store-java.lang.String-++[`store(String)`]

[[subgraph-step]]
=== Subgraph Step

image::subgraph-logo.png[width=380]

Extracting a portion of a graph from a larger one for analysis, visualization or other purposes is a fairly common
use case for graph analysts and developers. The `subgraph()`-step (*sideEffect*) provides a way to produce an
link:http://mathworld.wolfram.com/Edge-InducedSubgraph.html[edge-induced subgraph] from virtually any traversal.
The following example demonstrates how to produce the "knows" subgraph:

[gremlin-groovy,modern]
----
subGraph = g.E().hasLabel('knows').subgraph('subGraph').cap('subGraph').next() <1>
sg = subGraph.traversal()
sg.E() <2>
----

<1> As this function produces "edge-induced" subgraphs, `subgraph()` must be called at edge steps.
<2> The subgraph contains only "knows" edges.

A more common subgraphing use case is to get all of the graph structure surrounding a single vertex:

[gremlin-groovy,modern]
----
subGraph = g.V(3).repeat(__.inE().subgraph('subGraph').outV()).times(3).cap('subGraph').next()  <1>
sg = subGraph.traversal()
sg.E()
----

<1> Starting at vertex `3`, traverse 3 steps away on in-edges, outputting all of that into the subgraph.

There can be multiple `subgraph()` calls within the same traversal. Each operating against either the same graph
(i.e. same side-effect key) or different graphs (i.e. different side-effect keys).

[gremlin-groovy,modern]
----
t = g.V().outE('knows').subgraph('knowsG').inV().outE('created').subgraph('createdG').
          inV().inE('created').subgraph('createdG').iterate()
t.sideEffects.get('knowsG').traversal().E()
t.sideEffects.get('createdG').traversal().E()
----

TinkerGraph is the ideal (and default) `Graph` into which a subgraph is extracted as it's fast, in-memory, and supports
user-supplied identifiers which can be any Java object. It is this last feature that needs some focus as many
TinkerPop-enabled graphs have complex identifier types and TinkerGraph's ability to consume those makes it a perfect
host for an incoming subgraph. However care needs to be taken when using the elements of the TinkerGraph subgraph.
The original graph's identifiers may be preserved, but the elements of the graph are now TinkerGraph objects like,
`TinkerVertex` and `TinkerEdge`. As a result, they can not be used directly in Gremlin running against the original
graph. For example, the following traversal would likely return an error:

[source,text]
----
Vertex v = sg.V().has('name','marko').next();  <1>
List<Vertex> vertices = g.V(v).out().toList(); <2>
----

<1> Here "sg" is a reference to a TinkerGraph subgraph and "v" is a `TinkerVertex`.
<2> The `g.V(v)` has the potential to fail as "g" is the original `Graph` instance and not a TinkerGraph - it could
reject the `TinkerVertex` instance as it will not recognize it.

It is safer to wrap the `TinkerVertex` in a `ReferenceVertex` or simply reference the `id()` as follows:

[source,text]
----
Vertex v = sg.V().has('name','marko').next();
List<Vertex> vertices = g.V(v.id()).out().toList();

// OR

Vertex v = new ReferenceVertex(sg.V().has('name','marko').next());
List<Vertex> vertices = g.V(v).out().toList();
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#subgraph-java.lang.String-++[`subgraph(String)`]

[[sum-step]]
=== Sum Step

The `sum()`-step (*map*) operates on a stream of numbers and sums the numbers together to yield a double. Note that
the current traverser number is multiplied by the traverser bulk to determine how many such numbers are being
represented.

[gremlin-groovy,modern]
----
g.V().values('age').sum()
g.V().repeat(both()).times(3).values('age').sum()
----

IMPORTANT: `sum(local)` determines the sum of the current, local object (not the objects in the traversal stream).
This works for `Collection`-type objects. For any other object, a sum of `Double.NaN` is returned.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#sum--++[`sum()`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#sum-org.apache.tinkerpop.gremlin.process.traversal.Scope-++[`sum(Scope)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/Scope.html++[`Scope`]

[[tail-step]]
=== Tail Step

image::tail-step.png[width=530]

The `tail()`-step is analogous to <<limit-step,`limit()`>>-step, except that it emits the last `n`-objects instead of
the first `n`-objects.

[gremlin-groovy,modern]
----
g.V().values('name').order()
g.V().values('name').order().tail() <1>
g.V().values('name').order().tail(1) <2>
g.V().values('name').order().tail(3) <3>
----

<1> Last name (alphabetically).
<2> Same as statement 1.
<3> Last three names.

The `tail()`-step can also be applied with `Scope.local`, in which case it operates on the incoming collection.

[gremlin-groovy,modern]
----
g.V().as('a').out().as('a').out().as('a').select('a').by(tail(local)).values('name') <1>
g.V().as('a').out().as('a').out().as('a').select('a').by(unfold().values('name').fold()).tail(local) <2>
g.V().as('a').out().as('a').out().as('a').select('a').by(unfold().values('name').fold()).tail(local, 2) <3>
g.V().valueMap().tail(local) <4>
----

<1> Only the most recent name from the "a" step (`List<Vertex>` becomes `Vertex`).
<2> Same result as statement 1 (`List<String>` becomes `String`).
<3> `List<String>` for each path containing the last two names from the 'a' step.
<4> `Map<String, Object>` for each vertex, but containing only the last property value.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#tail--++[`tail()`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#tail-long-++[`tail(long)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#tail-org.apache.tinkerpop.gremlin.process.traversal.Scope-++[`tail(Scope)`]
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#tail-org.apache.tinkerpop.gremlin.process.traversal.Scope-long-++[`tail(Scope,long)`]
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/Scope.html++[`Scope`]

[[timelimit-step]]
=== TimeLimit Step

In many situations, a graph traversal is not about getting an exact answer as its about getting a relative ranking.
A classic example is link:http://en.wikipedia.org/wiki/Recommender_system[recommendation]. What is desired is a
relative ranking of vertices, not their absolute rank. Next, it may be desirable to have the traversal execute for
no more than 2 milliseconds. In such situations, `timeLimit()`-step (*filter*) can be used.

image::timelimit-step.png[width=400]

NOTE: The method `clock(int runs, Closure code)` is a utility preloaded in the <<gremlin-console,Gremlin Console>>
that can be used to time execution of a body of code.

[gremlin-groovy,modern]
----
g.V().repeat(both().groupCount('m')).times(16).cap('m').order(local).by(values,desc).next()
clock(1) {g.V().repeat(both().groupCount('m')).times(16).cap('m').order(local).by(values,desc).next()}
g.V().repeat(timeLimit(2).both().groupCount('m')).times(16).cap('m').order(local).by(values,desc).next()
clock(1) {g.V().repeat(timeLimit(2).both().groupCount('m')).times(16).cap('m').order(local).by(values,desc).next()}
----

In essence, the relative order is respected, even through the number of traversers at each vertex is not. The primary
benefit being that the calculation is guaranteed to complete at the specified time limit (in milliseconds). Finally,
note that the internal clock of `timeLimit()`-step starts when the first traverser enters it. When the time limit is
reached, any `next()` evaluation of the step will yield a `NoSuchElementException` and any `hasNext()` evaluation will
yield `false`.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#timeLimit-long-++[`timeLimit(long)`]

[[to-step]]
=== To Step

The `to()`-step is not an actual step, but instead is a "step-modulator" similar to <<as-step,`as()`>> and
<<by-step,`by()`>>. If a step is able to accept traversals or strings then `to()` is the
means by which they are added. The general pattern is `step().to()`. See <<from-step,`from()`>>-step.

The list of steps that support `to()`-modulation are: <<simplepath-step,`simplePath()`>>, <<cyclicpath-step,`cyclicPath()`>>,
 <<path-step,`path()`>>, and <<addedge-step,`addE()`>>.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#to-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`to(Direction,String...)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#to-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`to(String)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#to-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`to(Traversal)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#to-org.apache.tinkerpop.gremlin.structure.Vertex-++[`to(Vertex)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#toE-org.apache.tinkerpop.gremlin.structure.Direction-java.lang.String...-++[`toE(Direction,String)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#toV-org.apache.tinkerpop.gremlin.structure.Direction-++[`toV(Direction)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/structure/Direction.html++[`Direction`]

[[tree-step]]
=== Tree Step

From any one element (i.e. vertex or edge), the emanating paths from that element can be aggregated to form a
link:http://en.wikipedia.org/wiki/Tree_(data_structure)[tree]. Gremlin provides `tree()`-step (*sideEffect*) for such
this situation.

image::tree-step.png[width=450]

[gremlin-groovy,modern]
----
tree = g.V().out().out().tree().next()
----

It is important to see how the paths of all the emanating traversers are united to form the tree.

image::tree-step2.png[width=500]

The resultant tree data structure can then be manipulated (see `Tree` JavaDoc).

[gremlin-groovy,modern]
----
tree = g.V().out().out().tree().by('name').next()
tree['marko']
tree['marko']['josh']
tree.getObjectsAtDepth(3)
----

Note that when using `by()`-modulation, tree nodes are combined based on projection uniqueness, not on the
uniqueness of the original objects being projected. For instance:

[gremlin-groovy,modern]
----
g.V().has('name','josh').out('created').values('name').tree() <1>
g.V().has('name','josh').out('created').values('name').
  tree().by('name').by(label).by() <2>
----

<1> When the `tree()` is created, vertex 3 and 5 are unique and thus, form unique branches in the tree structure.
<2> When the `tree()` is `by()`-modulated by `label`, then vertex 3 and 5 are both "software" and thus are merged to a single node in the tree.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#tree--++[`tree()`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#tree-java.lang.String-++[`tree(String)`]

[[unfold-step]]
=== Unfold Step

If the object reaching `unfold()` (*flatMap*) is an iterator, iterable, or map, then it is unrolled into a linear
form. If not, then the object is simply emitted. Please see <<fold-step,`fold()`>> step for the inverse behavior.

[gremlin-groovy,modern]
----
g.V(1).out().fold().inject('gremlin',[1.23,2.34])
g.V(1).out().fold().inject('gremlin',[1.23,2.34]).unfold()
----

Note that `unfold()` does not recursively unroll iterators. Instead, `repeat()` can be used to for recursive unrolling.

[gremlin-groovy,modern]
----
inject(1,[2,3,[4,5,[6]]])
inject(1,[2,3,[4,5,[6]]]).unfold()
inject(1,[2,3,[4,5,[6]]]).repeat(unfold()).until(count(local).is(1)).unfold()
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#unfold--++[`unfold()`]

[[union-step]]
=== Union Step

image::union-step.png[width=650]

The `union()`-step (*branch*) supports the merging of the results of an arbitrary number of traversals. When a
traverser reaches a `union()`-step, it is copied to each of its internal steps. The traversers emitted from `union()`
are the outputs of the respective internal traversals.

[gremlin-groovy,modern]
----
g.V(4).union(
         __.in().values('age'),
         out().values('lang'))
g.V(4).union(
         __.in().values('age'),
         out().values('lang')).path()
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#union-org.apache.tinkerpop.gremlin.process.traversal.Traversal...-++[`union(Traversal...)`]

[[until-step]]
=== Until Step

The `until`-step is not an actual step, but is instead a step modulator for `<<repeat-step,repeat()>>` (find more
documentation on the `until()` there).

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#until-java.util.function.Predicate-++[`until(Predicate)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#until-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`until(Traversal)`]

[[value-step]]
=== Value Step

The `value()`-step (*map*) takes a `Property` and extracts the value from it.

[gremlin-groovy,theCrew]
----
g.V(1).properties().value()
g.V(1).properties().properties().value()
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#value--++[`value()`]

[[valuemap-step]]
=== ValueMap Step

The `valueMap()`-step yields a Map representation of the properties of an element.

[gremlin-groovy,modern]
----
g.V().valueMap()
g.V().valueMap('age')
g.V().valueMap('age','blah')
g.E().valueMap()
----

It is important to note that the map of a vertex maintains a list of values for each key. The map of an edge or
vertex-property represents a single property (not a list). The reason is that vertices in TinkerPop3 leverage
<<vertex-properties,vertex properties>> which are support multiple values per key. Using the <<the-crew-toy-graph,
"The Crew">> toy graph, the point is made explicit.

[gremlin-groovy,theCrew]
----
g.V().valueMap()
g.V().has('name','marko').properties('location')
g.V().has('name','marko').properties('location').valueMap()
----

If the `id`, `label`, `key`, and `value` of the `Element` is desired, then a boolean triggers its insertion into the
returned map.

[gremlin-groovy,theCrew]
----
g.V().hasLabel('person').valueMap(true)
g.V().hasLabel('person').valueMap(true,'name')
g.V().hasLabel('person').properties('location').valueMap(true)
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#valueMap-boolean-java.lang.String...-++[`valueMap(boolean,String...)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#valueMap-java.lang.String...-++[`valueMap(String...)`]

[[values-step]]
=== Values Step

The `values()`-step (*map*) extracts the values of properties from an `Element` in the traversal stream.

[gremlin-groovy,theCrew]
----
g.V(1).values()
g.V(1).values('location')
g.V(1).properties('location').values()
----

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#values-java.lang.String...-++[`values(String...)`]

[[vertex-steps]]
=== Vertex Steps

image::vertex-steps.png[width=350]

The vertex steps (*flatMap*) are fundamental to the Gremlin language. Via these steps, its possible to "move" on the
graph -- i.e. traverse.

* `out(string...)`: Move to the outgoing adjacent vertices given the edge labels.
* `in(string...)`: Move to the incoming adjacent vertices given the edge labels.
* `both(string...)`: Move to both the incoming and outgoing adjacent vertices given the edge labels.
* `outE(string...)`: Move to the outgoing incident edges given the edge labels.
* `inE(string...)`: Move to the incoming incident edges given the edge labels.
* `bothE(string...)`: Move to both the incoming and outgoing incident edges given the edge labels.
* `outV()`: Move to the outgoing vertex.
* `inV()`: Move to the incoming vertex.
* `bothV()`: Move to both vertices.
* `otherV()` : Move to the vertex that was not the vertex that was moved from.

[NOTE, caption=Groovy]
====
The term `in` is a reserved word in Groovy, and when therefore used as part of an anonymous traversal must be referred
to in Gremlin with the double underscore `+__.in()+`.
====

[NOTE, caption=Javascript]
====
The term `in` is a reserved word in Javascript, and therefore must be referred to in Gremlin with `in_()`.
====

[NOTE, caption=Python]
====
The term `in` is a reserved word in Python, and therefore must be referred to in Gremlin with `in_()`.
====

[gremlin-groovy,modern]
----
g.V(4)
g.V(4).outE() <1>
g.V(4).inE('knows') <2>
g.V(4).inE('created') <3>
g.V(4).bothE('knows','created','blah')
g.V(4).bothE('knows','created','blah').otherV()
g.V(4).both('knows','created','blah')
g.V(4).outE().inV() <4>
g.V(4).out() <5>
g.V(4).inE().outV()
g.V(4).inE().bothV()
----

<1> All outgoing edges.
<2> All incoming knows-edges.
<3> All incoming created-edges.
<4> Moving forward touching edges and vertices.
<5> Moving forward only touching vertices.

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#both-java.lang.String...-++[`both(String...)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#bothE-java.lang.String...-++[`bothE(String...)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#bothV--++[`bothV()`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#in-java.lang.String...-++[`in(String...)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#inE-java.lang.String...-++[`inE(String...)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#inV--++[`inV()`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#otherV--++[`otherV()`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#out-java.lang.String...-++[`out(String...)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#outE-java.lang.String...-++[`outE(String...)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#outV--++[`outV()`]

[[where-step]]
=== Where Step

The `where()`-step filters the current object based on either the object itself (`Scope.local`) or the path history
of the object (`Scope.global`) (*filter*). This step is typically used in conjunction with either
<<match-step,`match()`>>-step or <<select-step,`select()`>>-step, but can be used in isolation.

[gremlin-groovy,modern]
----
g.V(1).as('a').out('created').in('created').where(neq('a')) <1>
g.withSideEffect('a',['josh','peter']).V(1).out('created').in('created').values('name').where(within('a')) <2>
g.V(1).out('created').in('created').where(out('created').count().is(gt(1))).values('name') <3>
----

<1> Who are marko's collaborators, where marko can not be his own collaborator? (predicate)
<2> Of the co-creators of marko, only keep those whose name is josh or peter. (using a sideEffect)
<3> Which of marko's collaborators have worked on more than 1 project? (using a traversal)

IMPORTANT: Please see <<using-where-with-match,`match().where()`>> and <<using-where-with-select,`select().where()`>>
for how `where()` can be used in conjunction with `Map<String,Object>` projecting steps -- i.e. `Scope.local`.

A few more examples of filtering an arbitrary object based on a anonymous traversal is provided below.

[gremlin-groovy,modern]
----
g.V().where(out('created')).values('name') <1>
g.V().out('knows').where(out('created')).values('name') <2>
g.V().where(out('created').count().is(gte(2))).values('name') <3>
g.V().where(out('knows').where(out('created'))).values('name') <4>
g.V().where(__.not(out('created'))).where(__.in('knows')).values('name') <5>
g.V().where(__.not(out('created')).and().in('knows')).values('name') <6>
g.V().as('a').out('knows').as('b').
  where('a',gt('b')).
    by('age').
  select('a','b').
    by('name') <7>
g.V().as('a').out('knows').as('b').
  where('a',gt('b').or(eq('b'))).
    by('age').
    by('age').
    by(__.in('knows').values('age')).
  select('a','b').
    by('name') <8>
----

<1> What are the names of the people who have created a project?
<2> What are the names of the people that are known by someone one and have created a project?
<3> What are the names of the people how have created two or more projects?
<4> What are the names of the people who know someone that has created a project? (This only works in OLTP -- see the `WARNING` below)
<5> What are the names of the people who have not created anything, but are known by someone?
<6> The concatenation of `where()`-steps is the same as a single `where()`-step with an and'd clause.
<7> Marko knows josh and vadas but is only older than vadas.
<8> Marko is younger than josh, but josh knows someone equal in age to marko (which is marko).

WARNING: The anonymous traversal of `where()` processes the current object "locally". In OLAP, where the atomic unit
of computing is the vertex and its local "star graph," it is important that the anonymous traversal does not leave
the confines of the vertex's star graph. In other words, it can not traverse to an adjacent vertex's properties or
edges. 

*Additional References*

link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#where-org.apache.tinkerpop.gremlin.process.traversal.P-++[`where(P)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#where-java.lang.String-org.apache.tinkerpop.gremlin.process.traversal.P-++[`where(String,P)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/dsl/graph/GraphTraversal.html#where-org.apache.tinkerpop.gremlin.process.traversal.Traversal-++[`where(Traversal)`],
link:++https://tinkerpop.apache.org/javadocs/x.y.z/core/org/apache/tinkerpop/gremlin/process/traversal/P.html++[`P`]

[[a-note-on-predicates]]
== A Note on Predicates

A `P` is a predicate of the form `Function<Object,Boolean>`. That is, given some object, return true or false. The
provided predicates are outlined in the table below and are used in various steps such as <<has-step,`has()`>>-step,
<<where-step,`where()`>>-step, <<is-step,`is()`>>-step, etc.

[width="100%",cols="3,15",options="header"]
|=========================================================
| Predicate | Description
| `eq(object)` | Is the incoming object equal to the provided object?
| `neq(object)` | Is the incoming object not equal to the provided object?
| `lt(number)` | Is the incoming number less than the provided number?
| `lte(number)` | Is the incoming number less than or equal to the provided number?
| `gt(number)` | Is the incoming number greater than the provided number?
| `gte(number)` | Is the incoming number greater than or equal to the provided number?
| `inside(number,number)` | Is the incoming number greater than the first provided number and less than the second?
| `outside(number,number)` | Is the incoming number less than the first provided number or greater than the second?
| `between(number,number)` | Is the incoming number greater than or equal to the first provided number and less than the second?
| `within(objects...)` | Is the incoming object in the array of provided objects?
| `without(objects...)` | Is the incoming object not in the array of the provided objects?
|=========================================================

[gremlin-groovy]
----
eq(2)
not(neq(2)) <1>
not(within('a','b','c'))
not(within('a','b','c')).test('d') <2>
not(within('a','b','c')).test('a')
within(1,2,3).and(not(eq(2))).test(3) <3>
inside(1,4).or(eq(5)).test(3) <4>
inside(1,4).or(eq(5)).test(5)
between(1,2) <5>
not(between(1,2))
----

<1> The `not()` of a `P`-predicate is another `P`-predicate.
<2> `P`-predicates are arguments to various steps which internally `test()` the incoming value.
<3> `P`-predicates can be and'd together.
<4> `P`-predicates can be or' together.
<5> `and()` is a `P`-predicate and thus, a `P`-predicate can be composed of multiple `P`-predicates.

TIP: To reduce the verbosity of predicate expressions, it is good to
`import static org.apache.tinkerpop.gremlin.process.traversal.P.*`.

Finally, note that <<where-step,`where()`>>-step takes a `P<String>`. The provided string value refers to a variable
binding, not to the explicit string value.

[gremlin-groovy,modern]
----
g.V().as('a').both().both().as('b').count()
g.V().as('a').both().both().as('b').where('a',neq('b')).count()
----

NOTE: It is possible for graph system providers and users to extend `P` and provide new predicates. For instance, a
`regex(pattern)` could be a graph system specific `P`.

[[a-note-on-barrier-steps]]
== A Note on Barrier Steps

image:barrier.png[width=165,float=right] Gremlin is primarily a
link:http://en.wikipedia.org/wiki/Lazy_evaluation[lazy], stream processing language. This means that Gremlin fully
processes (to the best of its abilities) any traversers currently in the traversal pipeline before getting more data
from the start/head of the traversal. However, there are numerous situations in which a completely lazy computation
is not possible (or impractical). When a computation is not lazy, a "barrier step" exists. There are three types of
barriers:

. `CollectingBarrierStep`: All of the traversers prior to the step are put into a collection and then processed in
some way (e.g. ordered) prior to the collection being "drained" one-by-one to the next step. Examples
include: <<order-step,`order()`>>, <<sample-step,`sample()`>>, <<aggregate-step,`aggregate()`>>, <<barrier-step,`barrier()`>>.
. `ReducingBarrierStep`: All of the traversers prior to the step are processed by a reduce function and once all the
previous traversers are processed, a single "reduced value" traverser is emitted to the next step. Note that the path
history leading up to a reducing barrier step is destroyed given its many-to-one nature. Examples include:
<<fold-step,`fold()`>>, <<count-step,`count()`>>, <<sum-step,`sum()`>>, <<max-step,`max()`>>, <<min-step,`min()`>>.
. `SupplyingBarrierStep`: All of the traversers prior to the step are iterated (no processing) and then some provided
supplier yields a single traverser to continue to the next step. Examples include: <<cap-step,`cap()`>>.

In Gremlin OLAP (see <<traversalvertexprogram,`TraversalVertexProgram`>>), a barrier is introduced at the end of
every <<vertex-steps,adjacent vertex step>>. This means that the traversal does its best to compute as much as
possible at the current, local vertex. What it can't compute without referencing an adjacent vertex is aggregated
into a barrier collection. When there are no more traversers at the local vertex, the barriered traversers are the
messages that are propagated to remote vertices for further processing.

[[a-note-on-scopes]]
== A Note on Scopes

The `Scope` enum has two constants: `Scope.local` and `Scope.global`. Scope determines whether the particular step
being scoped is with respects to the current object (`local`) at that step or to the entire stream of objects up to that
step (`global`).

[NOTE, caption=Python]
====
The term `global` is a reserved word in Python, and therefore a `Scope` using that term must be referred as `global_`.
====

[gremlin-groovy,modern]
----
g.V().has('name','marko').out('knows').count() <1>
g.V().has('name','marko').out('knows').fold().count() <2>
g.V().has('name','marko').out('knows').fold().count(local) <3>
g.V().has('name','marko').out('knows').fold().count(global) <4>
----

<1> Marko knows 2 people.
<2> A list of Marko's friends is created and thus, one object is counted (the single list).
<3> A list of Marko's friends is created and a `local`-count yields the number of objects in that list.
<4> `count(global)` is the same as `count()` as the default behavior for most scoped steps is `global`.

The steps that support scoping are:

* <<count-step,`count()`>>: count the local collection or global stream.
* <<dedup-step, `dedup()`>>: dedup the local collection of global stream.
* <<max-step, `max()`>>: get the max value in the local collection or global stream.
* <<mean-step, `mean()`>>: get the mean value in the local collection or global stream.
* <<min-step, `min()`>>: get the min value in the local collection or global stream.
* <<order-step,`order()`>>: order the objects in the local collection or global stream.
* <<range-step, `range()`>>: clip the local collection or global stream.
* <<limit-step, `limit()`>>: clip the local collection or global stream.
* <<sample-step, `sample()`>>: sample objects from the local collection or global stream.
* <<tail-step, `tail()`>>: get the tail of the objects in the local collection or global stream.

A few more examples of the use of `Scope` are provided below:

[gremlin-groovy,modern]
----
g.V().both().group().by(label).select('software').dedup(local)
g.V().groupCount().by(label).select(values).min(local)
g.V().groupCount().by(label).order(local).by(values,desc)
g.V().fold().sample(local,2)
----

Finally, note that <<local-step,`local()`>>-step is a "hard-scoped step" that transforms any internal traversal into a
locally-scoped operation. A contrived example is provided below:

[gremlin-groovy,modern]
----
g.V().fold().local(unfold().count())
g.V().fold().count(local)
----

[[a-note-on-lambdas]]
== A Note On Lambdas

image:lambda.png[width=150,float=right] A link:http://en.wikipedia.org/wiki/Anonymous_function[lambda] is a function
that can be referenced by software and thus, passed around like any other piece of data. In Gremlin, lambdas make it
possible to generalize the behavior of a step such that custom steps can be created (on-the-fly) by the user. However,
it is advised to avoid using lambdas if possible.

[gremlin-groovy,modern]
----
g.V().filter{it.get().value('name') == 'marko'}.
      flatMap{it.get().vertices(OUT,'created')}.
      map {it.get().value('name')} <1>
g.V().has('name','marko').out('created').values('name') <2>
----

<1> A lambda-rich Gremlin traversal which should and can be avoided. (*bad*)
<2> The same traversal (result), but without using lambdas. (*good*)

Gremlin attempts to provide the user a comprehensive collection of steps in the hopes that the user will never need to
leverage a lambda in practice. It is advised that users only leverage a lambda if and only if there is no
corresponding lambda-less step that encompasses the desired functionality. The reason being, lambdas can not be
optimized by Gremlin's compiler strategies as they can not be programmatically inspected (see
<<traversalstrategy,traversal strategies>>). It is also not currently possible to send a lambda for remote execution to Gremlin-Server or a driver that supports remote execution.

In many situations where a lambda could be used, either a corresponding step exists or a traversal can be provided in
its place. A `TraversalLambda` behaves like a typical lambda, but it can be optimized and it yields less objects than
the corresponding pure-lambda form.

[gremlin-groovy,modern]
----
g.V().out().out().path().by {it.value('name')}.
                         by {it.value('name')}.
                         by {g.V(it).in('created').values('name').fold().next()} <1>
g.V().out().out().path().by('name').
                         by('name').
                         by(__.in('created').values('name').fold()) <2>
----

<1> The length-3 paths have each of their objects transformed by a lambda. (*bad*)
<2> The length-3 paths have their objects transformed by a lambda-less step and a traversal lambda. (*good*)

[[traversalstrategy]]
== TraversalStrategy

image:traversal-strategy.png[width=125,float=right] A `TraversalStrategy` analyzes a `Traversal` and, if the traversal
meets its criteria, can mutate it accordingly. Traversal strategies are executed at compile-time and form the foundation
of the Gremlin traversal machine's compiler. There are 5 categories of strategies which are itemized below:

 * There is an application-level feature that can be embedded into the traversal logic (*decoration*).
 * There is a more efficient way to express the traversal at the TinkerPop3 level (*optimization*).
 * There is a more efficient way to express the traversal at the graph system/language/driver level (*provider optimization*).
 * There are some final adjustments/cleanups/analyses required before executing the traversal (*finalization*).
 * There are certain traversals that are not legal for the application or traversal engine (*verification*).

NOTE: The <<explain-step,`explain()`>>-step shows the user how each registered strategy mutates the traversal.

A simple `OptimizationStrategy` is the `IdentityRemovalStrategy`.

[source,java]
----
public final class IdentityRemovalStrategy extends AbstractTraversalStrategy<TraversalStrategy.OptimizationStrategy> implements TraversalStrategy.OptimizationStrategy {

    private static final IdentityRemovalStrategy INSTANCE = new IdentityRemovalStrategy();

    private IdentityRemovalStrategy() {
    }

    @Override
    public void apply(Traversal.Admin<?, ?> traversal) {
        if (traversal.getSteps().size() <= 1)
            return;

        for (IdentityStep<?> identityStep : TraversalHelper.getStepsOfClass(IdentityStep.class, traversal)) {
            if (identityStep.getLabels().isEmpty() || !(identityStep.getPreviousStep() instanceof EmptyStep)) {
                TraversalHelper.copyLabels(identityStep, identityStep.getPreviousStep(), false);
                traversal.removeStep(identityStep);
            }
        }
    }

    public static IdentityRemovalStrategy instance() {
        return INSTANCE;
    }
}
----

This strategy simply removes any `IdentityStep` steps in the Traversal as `aStep().identity().identity().bStep()`
is equivalent to `aStep().bStep()`. For those traversal strategies that require other strategies to execute prior or
post to the strategy, then the following two methods can be defined in `TraversalStrategy` (with defaults being an
empty set). If the `TraversalStrategy` is in a particular traversal category (i.e. decoration, optimization,
provider-optimization, finalization, or verification), then priors and posts are only possible within the respective category.

[source,java]
public Set<Class<? extends S>> applyPrior();
public Set<Class<? extends S>> applyPost();

IMPORTANT: `TraversalStrategy` categories are sorted within their category and the categories are then executed in
the following order: decoration, optimization, provider optimization, finalization, and verification. If a designed strategy
does not fit cleanly into these categories, then it can implement `TraversalStrategy` and its prior and posts can reference
strategies within any category. However, such generalization are strongly discouraged.

An example of a `GraphSystemOptimizationStrategy` is provided below.

[source,groovy]
g.V().has('name','marko')

The expression above can be executed in a `O(|V|)` or `O(log(|V|)` fashion in <<tinkergraph-gremlin,TinkerGraph>>
depending on whether there is or is not an index defined for "name."

[source,java]
----
public final class TinkerGraphStepStrategy extends AbstractTraversalStrategy<TraversalStrategy.ProviderOptimizationStrategy> implements TraversalStrategy.ProviderOptimizationStrategy {

    private static final TinkerGraphStepStrategy INSTANCE = new TinkerGraphStepStrategy();

    private TinkerGraphStepStrategy() {
    }

    @Override
    public void apply(Traversal.Admin<?, ?> traversal) {
        if (TraversalHelper.onGraphComputer(traversal))
            return;

        for (GraphStep originalGraphStep : TraversalHelper.getStepsOfClass(GraphStep.class, traversal)) {
            TinkerGraphStep<?, ?> tinkerGraphStep = new TinkerGraphStep<>(originalGraphStep);
            TraversalHelper.replaceStep(originalGraphStep, tinkerGraphStep, traversal);
            Step<?, ?> currentStep = tinkerGraphStep.getNextStep();
            while (currentStep instanceof HasStep || currentStep instanceof NoOpBarrierStep) {
                if (currentStep instanceof HasStep) {
                    for (HasContainer hasContainer : ((HasContainerHolder) currentStep).getHasContainers()) {
                        if (!GraphStep.processHasContainerIds(tinkerGraphStep, hasContainer))
                            tinkerGraphStep.addHasContainer(hasContainer);
                    }
                    TraversalHelper.copyLabels(currentStep, currentStep.getPreviousStep(), false);
                    traversal.removeStep(currentStep);
                }
                currentStep = currentStep.getNextStep();
            }
        }
    }

    public static TinkerGraphStepStrategy instance() {
        return INSTANCE;
    }
}
----

The traversal is redefined by simply taking a chain of `has()`-steps after `g.V()` (`TinkerGraphStep`) and providing
their `HasContainers` to `TinkerGraphStep`. Then its up to `TinkerGraphStep` to determine if an appropriate index exists.
Given that the strategy uses non-TinkerPop3 provided steps, it should go into the `ProviderOptimizationStrategy` category
to ensure the added step does not interfere with the assumptions of the `OptimizationStrategy` strategies.

[gremlin-groovy,modern]
----
t = g.V().has('name','marko'); null
t.toString()
t.iterate(); null
t.toString()
----

WARNING: The reason that `OptimizationStrategy` and `ProviderOptimizationStrategy` are two different categories is
that optimization strategies should only rewrite the traversal using TinkerPop3 steps. This ensures that the
optimizations executed at the end of the optimization strategy round are TinkerPop3 compliant. From there, provider
optimizations can analyze the traversal and rewrite the traversal as desired using graph system specific steps (e.g.
replacing `GraphStep.HasStep...HasStep` with `TinkerGraphStep`). If provider optimizations use graph system specific
steps and implement `OptimizationStrategy`, then other TinkerPop3 optimizations may fail to optimize the traversal or
mis-understand the graph system specific step behaviors (e.g. `ProviderVertexStep extends VertexStep`) and yield
incorrect semantics.

Finally, here is a complicated traversal that has various components that are optimized by the default TinkerPop strategies.

[gremlin-groovy,modern]
----
g.V().hasLabel('person'). <1>
        and(has('name'),  <2>
            has('name','marko'),
            filter(has('age',gt(20)))). <3>
  match(__.as('a').has('age',lt(32)), <4>
        __.as('a').repeat(outE().inV()).times(2).as('b')). <5>
    where('a',neq('b')). <6>
    where(__.as('b').both().count().is(gt(1))). <7>
  select('b'). <8>
  groupCount().
    by(out().count()). <9>
  explain()
----

<1> `TinkerGraphStepStrategy` pulls in `has()`-step predicates for global, graph-centric index lookups.
<2> `FilterRankStrategy` sorts filter steps by their time/space execution costs.
<3> `InlineFilterStrategy` de-nests filters to increase the likelihood of filter concatenation and aggregation.
<4> `InlineFilterStrategy` pulls out named predicates from `match()`-step to more easily allow provider strategies to use indices.
<5> `RepeatUnrollStrategy` will unroll loops and `IncidentToAdjacentStrategy` will turn `outE().inV()`-patterns into `out()`.
<6> `MatchPredicateStrategy` will pull in `where()`-steps so that they can be subjected to `match()`-steps runtime query optimizer.
<7> `CountStrategy` will limit the traversal to only the number of traversers required for the `count().is(x)`-check.
<8> `PathRetractionStrategy` will remove paths from the traversers and increase the likelihood of bulking as path data is not required after `select('b')`.
<9> `AdjacentToIncidentStrategy` will turn `out()` into `outE()` to increase data access locality.

A collection of useful `DecorationStrategy` strategies are provided with TinkerPop3 and are generally useful to
end-users.  The following sub-sections detail these strategies:

=== ElementIdStrategy

`ElementIdStrategy` provides control over element identifiers. Some Graph implementations, such as TinkerGraph,
allow specification of custom identifiers when creating elements:

[gremlin-groovy]
----
g = TinkerGraph.open().traversal()
v = g.addV().property(id,'42a').next()
g.V('42a')
----

Other `Graph` implementations, such as Neo4j, generate element identifiers automatically and cannot be assigned.
As a helper, `ElementIdStrategy` can be used to make identifier assignment possible by using vertex and edge indices
under the hood.

[gremlin-groovy]
----
graph = Neo4jGraph.open('/tmp/neo4j')
strategy = ElementIdStrategy.build().create()
g = graph.traversal().withStrategies(strategy)
g.addV().property(id, '42a').id()
----

IMPORTANT: The key that is used to store the assigned identifier should be indexed in the underlying graph
database. If it is not indexed, then lookups for the elements that use these identifiers will perform a linear scan.

=== EventStrategy

The purpose of the `EventStrategy` is to raise events to one or more `MutationListener` objects as changes to the
underlying `Graph` occur within a `Traversal`. Such a strategy is useful for logging changes, triggering certain
actions based on change, or any application that needs notification of some mutating operation during a `Traversal`.
If the transaction is rolled back, the event queue is reset.

The following events are raised to the `MutationListener`:

* New vertex
* New edge
* Vertex property changed
* Edge property changed
* Vertex property removed
* Edge property removed
* Vertex removed
* Edge removed

To start processing events from a `Traversal` first implement the `MutationListener` interface. An example of this
implementation is the `ConsoleMutationListener` which writes output to the console for each event.  The following
console session displays the basic usage:

[gremlin-groovy]
----
import org.apache.tinkerpop.gremlin.process.traversal.step.util.event.*
graph = TinkerFactory.createModern()
l = new ConsoleMutationListener(graph)
strategy = EventStrategy.build().addListener(l).create()
g = graph.traversal().withStrategies(strategy)
g.addV().property('name','stephen')
g.V().has('name','stephen').
  property(list, 'location', 'centreville', 'startTime', 1990, 'endTime', 2000).
  property(list, 'location', 'dulles', 'startTime', 2000, 'endTime', 2006).
  property(list, 'location', 'purcellville', 'startTime', 2006)
g.V().has('name','stephen').
  property(set, 'location', 'purcellville', 'startTime', 2006, 'endTime', 2019)
g.E().drop()
----

By default, the `EventStrategy` is configured with an `EventQueue` that raises events as they occur within execution
of a `Step`.  As such, the final line of Gremlin execution that drops all edges shows a bit of an inconsistent count,
where the removed edge count is accounted for after the event is raised.  The strategy can also be configured with a
`TransactionalEventQueue` that captures the changes within a transaction and does not allow them to fire until the
transaction is committed.

WARNING: `EventStrategy` is not meant for usage in tracking global mutations across separate processes.  In other
words, a mutation in one JVM process is not raised as an event in a different JVM process.  In addition, events are
not raised when mutations occur outside of the `Traversal` context.

Another default configuration for `EventStrategy` revolves around the concept of "detachment". Graph elements are
detached from the graph as copies when passed to referring mutation events. Therefore, when adding a new `Vertex` in
TinkerGraph, the event will not contain a `TinkerVertex` but will instead include a `DetachedVertex`. This behavior
can be modified with the `detach()` method on the `EventStrategy.Builder` which accepts the following inputs: `null`
meaning no detachment and the return of the original element, `DetachedFactory` which is the same as the default
behavior, and `ReferenceFactory` which will return "reference" elements only with no properties.

IMPORTANT: If setting the `detach()` configuration to `null`, be aware that transactional graphs will likely create a
new transaction immediately following the `commit()` that raises the events. The graph elements raised in the events
may also not behave as "snapshots" at the time of their creation as they are "live" references to actual database
elements.

=== PartitionStrategy

image::partition-graph.png[width=325]

`PartitionStrategy` partitions the vertices and edges of a graph into `String` named partitions (i.e. buckets,
subgraphs, etc.). The idea behind `PartitionStrategy` is presented in the image above where each element is in a
single partition (represented by its color). Partitions can be read from, written to, and linked/joined by edges
that span one or two partitions (e.g. a tail vertex in one partition and a head vertex in another).

There are three primary configurations in `PartitionStrategy`:

. Partition Key - The property key that denotes a String value representing a partition.
. Write Partition - A `String` denoting what partition all future written elements will be in.
. Read Partitions - A `Set<String>` of partitions that can be read from.

The best way to understand `PartitionStrategy` is via example.

[gremlin-groovy]
----
graph = TinkerFactory.createModern()
strategyA = PartitionStrategy.build().partitionKey("_partition").writePartition("a").readPartitions("a").create()
strategyB = PartitionStrategy.build().partitionKey("_partition").writePartition("b").readPartitions("b").create()
gA = graph.traversal().withStrategies(strategyA)
gA.addV() // this vertex has a property of {_partition:"a"}
gB = graph.traversal().withStrategies(strategyB)
gB.addV() // this vertex has a property of {_partition:"b"}
gA.V()
gB.V()
----

Partitions may also extend to `VertexProperty` elements if the `Graph` can support meta-properties and if the
`includeMetaProperties` value is set to `true` when the `PartitionStrategy` is built.  The `partitionKey` will be
stored in the meta-properties of the `VertexProperty` and blind the traversal to those properties.  Please note that
the `VertexProperty` will only be hidden by way of the `Traversal` itself.  For example, calling `Vertex.property(k)`
bypasses the context of the `PartitionStrategy` and will thus allow all properties to be accessed.

By writing elements to particular partitions and then restricting read partitions, the developer is able to create
multiple graphs within a single address space. Moreover, by supporting references between partitions, it is possible
to merge those multiple graphs (i.e. join partitions).

[[readonlystrategy]]
=== ReadOnlyStrategy

`ReadOnlyStrategy` is largely self-explanatory.  A `Traversal` that has this strategy applied will throw an
`IllegalStateException` if the `Traversal` has any mutating steps within it.

[source,text]
----
gremlin> readonly = g.withStrategies(ReadOnlyStrategy.instance())
==>graphtraversalsource[tinkergraph[vertices:5 edges:7], standard]
gremlin> readonly.addV('person')
The provided traversal has a mutating step and thus is not read only: AddVertexStartStep({label=[person]})
Type ':help' or ':h' for help.
Display stack trace? [yN]
----

=== SubgraphStrategy

`SubgraphStrategy` is similar to `PartitionStrategy` in that it constrains a `Traversal` to certain vertices, edges,
 and vertex properties as determined by a `Traversal`-based criterion defined individually for each.

[gremlin-groovy]
----
graph = TinkerFactory.createTheCrew()
g = graph.traversal()
g.V().as('a').values('location').as('b').  <1>
  select('a','b').by('name').by()
g = g.withStrategies(SubgraphStrategy.build().vertexProperties(hasNot('endTime')).create()) <2>
g.V().as('a').values('location').as('b').  <3>
  select('a','b').by('name').by()
g.V().as('a').values('location').as('b').
  select('a','b').by('name').by().explain()
----

<1> Get all vertices and their vertex property locations.
<2> Create a `SubgraphStrategy` where vertex properties must not have an `endTime`-property (thus, the current location).
<3> Get all vertices and their current vertex property locations.

IMPORTANT: This strategy is implemented such that the vertices attached to an `Edge` must both satisfy the vertex criterion
(if present) in order for the `Edge` to be considered a part of the subgraph.

The example below uses all three filters: vertex, edge, and vertex property. People vertices must have lived in more than three places,
edges must be labeled "develops," and vertex properties must be the persons current location or a non-location property.

[gremlin-groovy]
----
graph = TinkerFactory.createTheCrew()
g = graph.traversal().withStrategies(SubgraphStrategy.build().
  vertices(or(hasNot('location'),properties('location').count().is(gt(3)))).
  edges(hasLabel('develops')).
  vertexProperties(or(hasLabel(neq('location')),hasNot('endTime'))).create())
g.V().valueMap(true)
g.E().valueMap(true)
g.V().outE().inV().
  path().
    by('name').
    by().
    by('name')
----

[[dsl]]
== Domain Specific Languages

Gremlin is a link:http://en.wikipedia.org/wiki/Domain-specific_language[domain specific language] (DSL) for traversing
graphs. It operates in the language of vertices, edges and properties. Typically, applications built with Gremlin are
not of the graph domain, but instead model their domain within a graph. For example, the
link:https://tinkerpop.apache.org/docs/current/images/tinkerpop-modern.png["modern" toy graph] models
software and person domain objects with the relationships between them (i.e. a person "knows" another person and a
person "created" software).

An analyst who wanted to find out if "marko" knows "josh" could write the following Gremlin:

[source,java]
----
g.V().hasLabel('person').has('name','marko').
  out('knows').hasLabel('person').has('name','josh').hasNext()
----

While this method achieves the desired answer, it requires the analyst to traverse the graph in the domain language
of the graph rather than the domain language of the social network. A more natural way for the analyst to write this
traversal might be:

[source,java]
----
g.persons('marko').knows('josh').hasNext()
----

In the statement above, the traversal is written in the language of the domain, abstracting away the underlying
graph structure from the query. The two traversal results are equivalent and, indeed, the "Social DSL" produces
the same set of traversal steps as the "Graph DSL" thus producing equivalent strategy application and performance
runtimes.

To further the example of the Social DSL consider the following:

[source,java]
----
// Graph DSL - find the number of persons who created at least 2 projects
g.V().hasLabel('person').
  where(outE("created").count().is(P.gte(2))).count()

// Social DSL - find the number of persons who created at least 2 projects
social.persons().where(createdAtLeast(2)).count()

// Graph DSL - determine the age of the youngest friend "marko" has
g.V().hasLabel('person').has('name','marko').
  out("knows").hasLabel("person").values("age").min()

// Social DSL - determine the age of the youngest friend "marko" has
social.persons("marko").youngestFriendsAge()
----

The following sections explain how to develop application specific DSLs for different <<gremlin-variants,Gremlin Language Variants>>
using the examples above of the Social DSL as the API for the implementation.

[[gremlin-java-dsl]]
=== Gremlin-Java

Creating a DSL in Java requires the `@GremlinDsl` Java annotation in `gremlin-core`. This annotation should be applied
to a "DSL interface" that extends `GraphTraversal.Admin`.

[source,java]
----
@GremlinDsl
public interface SocialTraversalDsl<S, E> extends GraphTraversal.Admin<S, E> {
}
----

IMPORTANT: The name of the DSL interface should be suffixed with "TraversalDSL". All characters in the interface name
before that become the "name" of the DSL.

In this interface, define the methods that the DSL will be composed of:

[source,java]
----
@GremlinDsl
public interface SocialTraversalDsl<S, E> extends GraphTraversal.Admin<S, E> {
    public default GraphTraversal<S, Vertex> knows(String personName) {
        return out("knows").hasLabel("person").has("name", personName);
    }

    public default <E2 extends Number> GraphTraversal<S, E2> youngestFriendsAge() {
        return out("knows").hasLabel("person").values("age").min();
    }

    public default GraphTraversal<S, Long> createdAtLeast(int number) {
        return outE("created").count().is(P.gte(number));
    }
}
----

IMPORTANT: Follow the TinkerPop convention of using `<S,E>` in naming generics as those conventions are taken into
account when generating the anonymous traversal class. The processor attempts to infer the appropriate type parameters
when generating the anonymous traversal class. If it cannot do it correctly, it is possible to avoid the inference by
using the `GremlinDsl.AnonymousMethod` annotation on the DSL method. It allows explicit specification of the types to
use.

The `@GremlinDsl` annotation is used by the link:https://docs.oracle.com/javase/8/docs/api/index.html?javax/annotation/processing/Processor.html[Java Annotation Processor]
to generate the boilerplate class structure required to properly use the DSL within the TinkerPop framework. These
classes can be generated and maintained by hand, but it would be time consuming, monotonous and error-prone to do so.
Typically, the Java compilation process is automatically configured to detect annotation processors on the classpath
and will automatically use them when found. If that does not happen, it may be necessary to make configuration changes
to the build to allow for the compilation process to be aware of the following `javax.annotation.processing.Processor`
implementation:

[source,java]
----
org.apache.tinkerpop.gremlin.process.traversal.dsl.GremlinDslProcessor
----

The annotation processor will generate several classes for the DSL:

* `SocialTraversal` - A `Traversal` interface that extends the `SocialTraversalDsl` proxying methods to its underlying
interfaces (such as `GraphTraversal`) to instead return a `SocialTraversal`
* `DefaultSocialTraversal` - A default implementation of `SocialTraversal` (typically not used directly by the user)
* `SocialTraversalSource` - Spawns `DefaultSocialTraversal` instances.
* `+__+` - Spawns anonymous `DefaultSocialTraversal` instances.

Using the DSL then just involves telling the `Graph` to use it:

[source,java]
----
SocialTraversalSource social = graph.traversal(SocialTraversalSource.class);
social.V().has("name","marko").knows("josh");
----

The `SocialTraversalSource` can also be customized with DSL functions. As an additional step, include a class that
extends from `GraphTraversalSource` and with a name that is suffixed with "TraversalSourceDsl". Include in this class,
any custom methods required by the DSL:

[source,java]
----
public class SocialTraversalSourceDsl extends GraphTraversalSource {

    public SocialTraversalSourceDsl(Graph graph, TraversalStrategies traversalStrategies) {
        super(graph, traversalStrategies);
    }

    public SocialTraversalSourceDsl(Graph graph) {
        super(graph);
    }

    public GraphTraversal<Vertex, Vertex> persons(String... names) {
        GraphTraversalSource clone = this.clone();

        // Manually add a "start" step for the traversal in this case the equivalent of V(). GraphStep is marked
        // as a "start" step by passing "true" in the constructor.
        clone.getBytecode().addStep(GraphTraversal.Symbols.V);
        GraphTraversal<Vertex, Vertex> traversal = new DefaultGraphTraversal<>(clone);
        traversal.asAdmin().addStep(new GraphStep<>(traversal.asAdmin(), Vertex.class, true));

        traversal = traversal.hasLabel("person");
        if (names.length > 0) traversal = traversal.has("name", P.within(names));

        return traversal;
    }
}
----

Then, back in the `SocialTraversal` interface, update the `GremlinDsl` annotation with the `traversalSource` argument
to point to the fully qualified class name of the `SocialTraversalSourceDsl`:

[source,java]
----
@GremlinDsl(traversalSource = "com.company.SocialTraversalSourceDsl")
public interface SocialTraversalDsl<S, E> extends GraphTraversal.Admin<S, E> {
    ...
}
----

It is then possible to use the `persons()` method to start traversals:

[source,java]
----
SocialTraversalSource social = graph.traversal(SocialTraversalSource.class);
social.persons("marko").knows("josh");
----

NOTE: Using Maven, as shown in the `gremlin-archetype-dsl` module, makes developing DSLs with the annotation processor
straightforward in that it sets up appropriate paths to the generated code automatically.

[[gremlin-python-dsl]]
=== Gremlin-Python

Writing a Gremlin DSL in Python simply requires direct extension of several classes:

* `GraphTraversal` - which exposes the various steps used in traversal writing
* `+__+` - which spawns anonymous traversals from steps
* `GraphTraversalSource` - which spawns `GraphTraversal` instances

The Social DSL based on the link:https://tinkerpop.apache.org/docs/current/images/tinkerpop-modern.png["modern" toy graph]
might look like this:

[source,python]
----
class SocialTraversal(GraphTraversal):

    def knows(self, person_name):
        return self.out("knows").hasLabel("person").has("name", person_name)

    def youngestFriendsAge(self):
        return self.out("knows").hasLabel("person").values("age").min()

    def createdAtLeast(self, number):
        return self.outE("created").count().is_(P.gte(number))

class __(AnonymousTraversal):

    graph_traversal = SocialTraversal

    @classmethod
    def knows(cls, *args):
        return cls.graph_traversal(None, None, Bytecode()).knows(*args)

    @classmethod
    def youngestFriendsAge(cls, *args):
        return cls.graph_traversal(None, None, Bytecode()).youngestFriendsAge(*args)

    @classmethod
    def createdAtLeast(cls, *args):
        return cls.graph_traversal(None, None, Bytecode()).createdAtLeast(*args)


class SocialTraversalSource(GraphTraversalSource):

    def __init__(self, *args, **kwargs):
        super(SocialTraversalSource, self).__init__(*args, **kwargs)
        self.graph_traversal = SocialTraversal

    def persons(self, *args):
        traversal = self.get_graph_traversal()
        traversal.bytecode.add_step("V")
        traversal.bytecode.add_step("hasLabel", "person")

        if len(args) > 0:
            traversal.bytecode.add_step("has", "name", P.within(args))

        return traversal
----

NOTE: The `AnonymousTraversal` class above is just an alias for `+__+` as in
`+from gremlin_python.process.graph_traversal import __ as AnonymousTraversal+`

Using the DSL is straightforward and just requires that the graph instance know the `SocialTraversalSource` should
be used:

[source,python]
----
social = Graph().traversal(SocialTraversalSource).withRemote(DriverRemoteConnection('ws://localhost:8182/gremlin','g'))
social.persons("marko").knows("josh")
social.persons("marko").youngestFriendsAge()
social.persons().filter(__.createdAtLeast(2)).count()
----

[[gremlin-net-dsl]]
=== Gremlin.Net

Developing DSLs for .Net is most easily implemented using link:https://docs.microsoft.com/en-us/dotnet/csharp/programming-guide/classes-and-structs/extension-methods[Extension Methods]
as they don't require direct extension of classes in the TinkerPop hierarchy. Extension Method classes simply need to
be constructed for the `GraphTraversal` and the `GraphTraversalSource`. Unfortunately, anonymous traversals (spawned
from `+__+`) can't use the Extension Method approach as they do not work for static classes and static classes can't be
extended. The only option is to re-implement the methods of `+__+` as a wrapper in the anonymous traversal for the DSL
or to simply create a static class for the DSL and use the two anonymous traversals creators independently. The
following example uses the latter approach as it saves a lot of boilerplate code with the minor annoyance of having a
second static class to deal with when writing traversals rather than just calling `+__+` for everything.

[source,csharp]
----
namespace Dsl
{

    public static class SocialTraversalExtensions
    {
        public static GraphTraversal<Vertex,Vertex> Knows(this GraphTraversal<Vertex,Vertex> t, string personName)
        {
            return t.Out("knows").HasLabel("person").Has("name", personName);
        }

        public static GraphTraversal<Vertex, int> YoungestFriendsAge(this GraphTraversal<Vertex,Vertex> t)
        {
            return t.Out("knows").HasLabel("person").Values<int>("age").Min<int>();
        }

        public static GraphTraversal<Vertex,long> CreatedAtLeast(this GraphTraversal<Vertex,Vertex> t, long number)
        {
            return t.OutE("created").Count().Is(P.Gte(number));
        }
    }

    public static class __Social
    {
        public static GraphTraversal<object,Vertex> Knows(string personName)
        {
            return __.Out("knows").HasLabel("person").Has("name", personName);
        }

        public static GraphTraversal<object, int> YoungestFriendsAge()
        {
            return __.Out("knows").HasLabel("person").Values<int>("age").Min<int>();
        }

        public static GraphTraversal<object,long> CreatedAtLeast(long number)
        {
            return __.OutE("created").Count().Is(P.Gte(number));
        }
    }

    public static class SocialTraversalSourceExtensions
    {
        public static GraphTraversal<Vertex,Vertex> Persons(this GraphTraversalSource g, params string[] personNames)
        {
            GraphTraversal<Vertex,Vertex> t = g.V().HasLabel("person");

            if (personNames.Length > 0)
            {
                t = t.Has("name", P.Within(personNames));
            }

            return t;
        }
    }
}
----

Note the creation of `+__Social+` as the Social DSL's "extension" to the available ways in which to spawn anonymous
traversals. The use of the double underscore prefix in the name is just a convention to consider using and is not a
requirement. To use the DSL, bring it into scope with the `using` directive:

[source,csharp]
----
using Dsl;
using static Dsl.__Social;
----

and then it can be called from the application as follows:

[source,csharp]
----
var graph = new Graph();
var connection = new DriverRemoteConnection(new GremlinClient(new GremlinServer("localhost", 8182)));
var social = graph.Traversal().WithRemote(connection);

social.Persons("marko").Knows("josh");
social.Persons("marko").YoungestFriendsAge();
social.Persons().Filter(CreatedAtLeast(2)).Count();
----

[[gremlin-javascript-dsl]]
=== Gremlin-JavaScript

Developing Gremlin DSLs in JavaScript largely requires extension of existing core classes with use of standalone
functions for anonymous traversal spawning. The pattern is demonstrated in the following example:

[source,javascript]
----
class SocialTraversal extends GraphTraversal {
  constructor(graph, traversalStrategies, bytecode) {
    super(graph, traversalStrategies, bytecode);
  }

  aged(age) {
    return this.has('person', 'age', age);
  }
}

class SocialTraversalSource extends GraphTraversalSource {
  constructor(graph, traversalStrategies, bytecode) {
    super(graph, traversalStrategies, bytecode, SocialTraversalSource, SocialTraversal);
  }

  person(name) {
    return this.V().has('person', 'name', name);
  }
}

function anonymous() {
  return new SocialTraversal(null, null, new Bytecode());
}

function aged(age) {
  return anonymous().aged(age);
}
----

`SocialTraversal` extends the core `GraphTraversal` class and has a three argument constructor which is immediately
proxied to the `GraphTraversal` constructor. New DSL steps are then added to this class using available steps to
construct the underlying traversal to execute as demonstrated in the `aged()` step.

The `SocialTraversal` is spawned from a `SocialTraversalSource` which is extended from `GraphTraversalSource`. Steps
added here are meant to be start steps. In the above case, the `person()` start step find a "person" vertex to begin
the traversal from.

Typically, steps that are made available on a `GraphTraversal` (i.e. SocialTraversal in this example) should also be
made available as spawns for anonymous traversals. The recommendation is that these steps be exposed in the module
as standalone functions. In the example above, the standalone `aged()` step creates an anonymous traversal through
an `anonymous()` utility function. The method for creating these standalone functions can be handled in other ways if
desired.

To use the DSL, simply initialize the `g` as follows:

[source,javascript]
----
const g = traversal(SocialTraversalSource).withRemote(connection);
g.person('marko').aged(29).values('name').toList().
  then(names => console.log(names));
----