| ====================================== |
| INSTALLING SUBVERSION |
| A Quick Guide |
| ====================================== |
| |
| $LastChangedDate$ |
| |
| *** Note: Subversion is PRE-ALPHA code. Don't use it on real data. *** |
| |
| Contents: |
| |
| I. BUILD REQUIREMENTS |
| |
| II. INSTALLATION |
| A. Bootstrapping from a Tarball or RPM |
| B. Building the Latest Source under Unix |
| C. Building under Unix in Different Directories |
| D. Bootstrapping from a Zip File under Windows |
| E. Building the Latest Source under Windows |
| |
| III. BUILDING A SUBVERSION SERVER |
| A. Setting Up Apache |
| B. Making and Installing the Subversion Server |
| C. Configuring Apache for Subversion |
| D. Running and Testing |
| |
| |
| I. BUILD REQUIREMENTS |
| ================== |
| |
| Subversion depends on a number of third party tools and libraries. |
| If you are bootstrapping from a tarball, zipfile or an RPM then |
| you will already have everything you require to get a Subversion |
| client. So long as you don't plan to build a new client from the |
| latest source or to build a Subversion server, you can go directly |
| to section II.A. |
| |
| Otherwise, you need to read the following so that you can determine |
| what other tools and libraries will be required so that Subversion |
| can be built with the set of features you want. |
| |
| On Unix systems, the './configure' script will tell you if you are |
| missing the correct version of any of the required libraries or |
| tools, so if you are in a real hurry to get building, you can skip |
| straight to section II. If you want to gather the pieces you will |
| need before starting out, however, you should read the following. |
| |
| Note: Because previous builds of Subversion may have installed older |
| versions of these libraries, you may want to run some of the cleanup |
| commands described in section II.B before installing the following. |
| |
| 1. Apache Portable Runtime |
| |
| Whenever you want to build any part of Subversion, you need the |
| Apache Portable Runtime (APR) and the APR Utility (APRUTIL) |
| libraries. At the time of this writing, there were no official |
| release versions of APR/APRUTIL available. |
| |
| If you already have the APR libraries compiled and do not wish to |
| regenerate them from source code, then Subversion needs to be |
| able to find them. |
| |
| There are a couple of options to "./configure" that tell it where |
| to look for the APR and APRUTIL libraries. By default, it will look |
| for and use the apr-config and apu-config scripts. These scripts |
| provide all the relevant information for the APR and APRUTIL |
| installations. If the libraries are installed in the default Apache |
| HTTP 2.0 location (/usr/local/apache2/lib) then these scripts will |
| be found and used. |
| |
| If you want to specify the location of the APR library, you can use |
| the "--with-apr=" option of "./configure". It should be able to find |
| the apr-config script in the standard location under that directory |
| (e.g. ${prefix}/bin). |
| |
| Similar, you can specify the location of APRUTIL using the |
| "--with-apr-util=" option to "./configure". It will look for the |
| apu-config script relative to that directory. |
| |
| For example, if you want to use the APR libraries you built |
| with the Apache HTTP 2.0 server, and which you have installed in |
| a non-standard location, you could run: |
| |
| $ ./configure --with-apr=/home/fred/apache2 \ |
| --with-apr-util=/home/fred/apache2 ... |
| |
| If you want Subversion to build the APR libraries from source code |
| as part of the Subversion build process, you can put their source |
| code into the "./apr" and "./apr-util" directories. The Subversion |
| tarball comes with copies of the libraries' source code stored in |
| these subdirectories which you could copy or link to. To be safe, |
| however, you should check out the latest version from the Apache CVS |
| repository, since the latest Subversion may well rely on the latest |
| changes to APR and APRUTIL. |
| |
| You can get the latest version of APR and APRUTIL with the following |
| two commands. If you run them from the directory where you've |
| checked out Subversion, then the APR source code will be in "./apr" |
| and "./apr-util", where Subversion wants it: |
| |
| $ cvs -d :pserver:anoncvs@cvs.apache.org:/home/cvspublic login |
| (password: 'anoncvs') |
| |
| $ cvs -d :pserver:anoncvs@cvs.apache.org:/home/cvspublic co apr |
| $ cvs -d :pserver:anoncvs@cvs.apache.org:/home/cvspublic co apr-util |
| |
| The "./apr" and "./apr-util" directories will not be considered |
| if the search for apr-config and apu-config scripts is successful. |
| |
| |
| 2. autoconf 2.50 or newer (Unix only) |
| |
| This is required only if you plan to build from the latest source |
| (See section II.B). Generally only developers would be doing this, |
| but at this stage in Subversion's development chances are you'll |
| want to do this as well. |
| |
| |
| 3. libtool 1.4 or newer (Unix only) |
| |
| This is required only if you plan to build from the latest source |
| (See section II.B), which you probably want to do. See above. |
| |
| |
| 4. bison or yacc (Unix only) |
| |
| This is required only if you plan to build from the latest source |
| (See section II.B), which you probably want to do. See above. |
| |
| The reason one of these programs is required is that it will |
| generate the code which parses complex date formats, so that |
| Subversion can work with dates like "yesterday" and "last month" |
| and "four hours ago". Note that most modern Unices come with one |
| or the other of these programs, and only one is required. |
| |
| The reason you don't need one of these programs on a Windows |
| platform is that the date parsing file has been pregenerated |
| and will automatically be copied into place by the Windows |
| Build. |
| |
| |
| 5. Neon library 0.21.1 |
| |
| The Neon library allows a Subversion client to interact with remote |
| repositories over the Internet. Although in theory you could have |
| the client interact only with local repositories, currently the |
| build system requires Neon to be present. Hopefully, this will be |
| fixed in the future. |
| |
| The Neon library source code can be installed in "./neon" if you |
| want Subversion to build it. The source code is included with the |
| latest Subversion tarball, and it can also be obtained from: |
| |
| http://www.webdav.org/neon/neon-0.21.1.tar.gz |
| |
| Unpack the archive using tar/gunzip and rename the resulting |
| directory from "./neon-0.21.1/" to "./neon/". |
| |
| Without source code, a previously compiled library can be picked up |
| from the standard locations. If you want to specify a nonstandard |
| location, you need to use the LDFLAGS environmental variable when |
| you run "./configure". You may also have to specify where the |
| neon-config script (which identifies various features of the Neon |
| library) is kept by giving the "--with-neon=" option to |
| "./configure". Note that the script should be kept in a "bin" |
| subdirectory beneath whereever "--with-neon" is pointed. |
| |
| |
| 6. Berkeley DB 4.0.14 |
| |
| Berkeley DB is needed to build a Subversion server, or to access |
| a repository on local disk. If you are only interested in |
| building a Subversion client that speaks to a remote (networked) |
| repository, you don't need it. |
| |
| You'll need Berkeley DB 4.0.14 installed on your system. You can |
| get it from: |
| |
| http://www.sleepycat.com/. |
| |
| If you already have another version of Berkeley DB installed and |
| don't want to downgrade, you can unpack the Berkeley 4.0.14 |
| distribution into a subdir named `db' in the top-level of the |
| Subversion source tree. Then Subversion will ignore the system |
| DB and use the one it found in its own source tree. |
| |
| Alternatively, you can add this flag |
| |
| --with-berkeley-db=/usr/local/BerkeleyDB.4.0 |
| |
| to your `configure' switches, and the build process will use the |
| Berkeley library in the named directory. You may need to use a |
| different path, of course. |
| |
| If you are on the Windows platform and want to build Subversion, |
| a precompiled version of the Berkeley DB library is available for |
| download at the Subversion web site: |
| |
| http://subversion.tigris.org/servlets/ProjectDownloadList |
| |
| |
| 7. Apache Web Server 2.0.36 or newer |
| |
| The Apache HTTP server is required if you wish to offer your |
| Subversion repository over the Internet. Building Subversion, the |
| Apache server, and the modules that Apache needs to communicate |
| with Subversion are complicated enough that there is a whole |
| section at the end of this document that describes how it is |
| done. See section III for details. |
| |
| |
| 8. Python 2.0 |
| |
| If you want to run "make check" or build from the latest source |
| under Unix as described in section II.B, install Python 2.0 or |
| higher on your system. The majority of the test suite is written |
| in Python, as is part of Subversion's build system. Get it from |
| http://www.python.org/. |
| |
| |
| 9. Visual C++ 6.0 or newer (Windows Only) |
| |
| To build Subversion under any of the MS Windows platforms, you |
| will need a copy of Microsoft Visual C++. The project files are |
| provided for you. |
| |
| |
| 10. A gnu-like diff and diff3 |
| |
| Many of the features of the Subversion client require the ability |
| to call out to an external diff or diff3 program, one that |
| conforms to the behaviour of the GNU versions of these programs. |
| |
| On some versions of Unix, this may involve getting a replacement |
| for your already existing diff and diff3 program. On FreeBSD |
| systems, for example, it requires getting gdiff and gdiff3. |
| |
| On a Windows platform, Subversion also requires a GNU diff.exe |
| and diff3.exe. One implementation is provided by the Cygwin |
| project: |
| |
| http://sources.redhat.com/cygwin |
| |
| Note that the positions for diff.exe and diff3.exe are defined |
| in svn_private_config.hw and that the default path is |
| "C:\Program Files\cygnus\cygwin\bin". If you are using the Cygwin |
| versions the file cygwin1.dll needs to reside in the same directory. |
| |
| |
| 11. Libraries for our libraries |
| |
| Some of the libraries that Subversion depends on themselves have |
| optional dependencies that can add features to what Subversion |
| can do. Here are some examples. |
| |
| The Neon library has support for SSL encryption by relying on the |
| OpenSSL library. When Neon is created with this dependency, then |
| the Subversion client inherits the ability to support SSL |
| connections. Neon also has support for sending compressed data |
| using the zlib library which a Subversion client can take |
| advantage of. |
| |
| With Unix-based systems, you can enable support for SSL from the |
| Subversion build provided that you are building Neon in the |
| "./neon/" directory as described above in section I.5. You also |
| need OpenSSL installed on your system. Just add "--with-ssl" as |
| a parameter when you run Subversion's "./configure", and it will |
| be passed on to the Neon build system. If your OpenSSL |
| installation is hard for Neon to find, you may need to use |
| "--with-ssl=/path/to/lib" instead. The zlib library is included |
| in Neon by default, but you can also specify a path to the |
| library using "--with-zlib". Consult the Neon documentation for |
| more information on how to use these parameters and versions of |
| libraries you need. |
| |
| Under Windows, you have to edit a batch file available in your |
| Subversion source tree (the root of which is labelled <SVN> |
| below): |
| |
| <SVN>\build\win32\build_neon.bat |
| |
| and point it to the appropriate directories. |
| |
| You can also add support for these features to a Subversion server |
| and you can even use the same support libraries. The Subversion |
| build system will not provide them, however. You add them by |
| specifying parameters to the "./configure" script of the Apache |
| Server instead. |
| |
| For getting SSL on your server, you would add the "--enable-ssl" |
| or "--with-ssl=/path/to/lib" option to Apache's "./configure" |
| script. Apache enables zlib support by default, but you can |
| specify a nonstandard location for the library with the |
| "--with-z=/path/to/dir" option. Consult the Apache documentation |
| for more details, and for other modules you may wish to install |
| to enhance your Subversion server. |
| |
| If you don't already have it, you can get a copy of OpenSSL, |
| including instructions for building and packaging on both Unix |
| systems and Windows, at: |
| |
| http://www.openssl.org/ |
| |
| Many Unix systems already come with zlib, but if you need it it |
| is available from: |
| |
| http://www.gzip.org/zlib/ |
| |
| Windows users should just get the pre-built package: |
| |
| http://www.gzip.org/zlib/contrib/zlib113-win32.zip |
| |
| The neon build scripts on Windows are set up to use those |
| libraries. |
| |
| |
| II. INSTALLATION |
| ============ |
| |
| A. Bootstrapping from a Tarball or RPM |
| ----------------------------------- |
| |
| In order to get the very latest Subversion source code, you need |
| to check it out of a Subversion repository, and therefore you |
| first need a Subversion client. |
| |
| |
| 1. Boostrapping from a Tarball |
| |
| Download the most recent distribution tarball from: |
| |
| http://subversion.tigris.org/servlets/ProjectDownloadList |
| |
| Unpack it, and use the standard GNU procedure to compile: |
| |
| $ ./configure --enable-maintainer-mode --disable-shared |
| $ make |
| |
| (The first switch to ./configure turns on debugging, and the |
| second switch builds a statically-linked client binary.) |
| |
| After compiling, you will have a large 'svn' binary sitting in |
| the tree. Use it to check out a real Subversion working copy: |
| |
| $ subversion-rXXXX/subversion/clients/cmdline/svn checkout \ |
| http://svn.collab.net/repos/svn/trunk -d svn |
| |
| A svn/dist.sh |
| A svn/buildcheck.sh |
| A svn/HACKING |
| ... |
| |
| |
| 2. Bootstrapping from an RPM |
| |
| If you are using Linux (or any OS that can use RPM) then another |
| possibility is to download the binary RPM from the |
| http://summersoft.fay.ar.us/pub/linux/RPMS/i386 or |
| http://summersoft.fay.ar.us/pub/linux/RPMS/ppc directory. |
| |
| Currently only Linux on the i386 and ppc platforms are supported |
| using this method. You might also require additional RPMS |
| (which can be found in the above mentioned directory) to use the |
| subversion RPM depending on what packages you already have installed: |
| |
| subversion*.i386.rpm |
| apache*.i386.rpm (Version 2.0.36 or greater) |
| db*.i386.rpm (Version 4.0.14 or greater) |
| expat (Comes with RedHat) |
| neon (Version 0.21.1) |
| |
| After downloading, install it (as root user): |
| |
| # rpm -ivh subversion*.386.rpm (add other packages as necessary) |
| |
| After installing, you can then use the svn command to check out the |
| latest source code: |
| |
| $ /usr/bin/svn checkout http://svn.collab.net/repos/svn/trunk -d svn |
| A svn/dist.sh |
| A svn/buildcheck.sh |
| A svn/HACKING |
| ... |
| |
| Note: For an easy way to generate a new version of the RPM |
| source and binary package from the latest source code you |
| just checked out, see the packages/rpm/README file for a |
| one-line build procedure. |
| |
| |
| B. Building the Latest Source under Unix |
| ------------------------------------- |
| |
| (These instructions assume you have already installed Subversion |
| and checked out a Subversion working copy. See the section |
| "Bootstrapping From A Tarball Or RPM" above for more.) |
| |
| You can discard the directory created by the tarball; you're |
| about to build the latest, greatest Subversion client. |
| |
| First off, if you have any Subversion libraries lying around |
| from previous 'make installs', clean them up first! |
| |
| # rm -f /usr/local/lib/libsvn* |
| # rm -f /usr/local/lib/libapr* |
| # rm -f /usr/local/lib/libexpat* |
| # rm -f /usr/local/lib/libneon* |
| |
| Start the process by running "autogen.sh": |
| |
| $ sh ./autogen.sh |
| |
| This script will make sure you have all the necessary components |
| available to build Subversion. If any are missing, you will be |
| told where to get them from. (See the 'Build Requirements' in |
| section I.) |
| |
| After all components are in place, follow the usual procedure: |
| |
| $ ./configure --enable-maintainer-mode --disable-shared |
| $ make |
| $ make check (optional) |
| # make install |
| |
| The flags to `configure' are highly recommended for developers, |
| as they build a statically-linked binary. If you don't use |
| those flags, then you must reverse the order of the "make check" |
| and "make install" steps, because the shared libraries must be |
| installed before "make check" will work. |
| |
| Additionally, with shared library builds, the destination |
| library directory must be identified in your operating system's |
| library search path. That is in either /etc/ld.so.conf or |
| $LD_LIBRARY_PATH for linux systems and in /etc/rc.conf for |
| FreeBSD, followed by a run of the 'ldconfig' program. Check your |
| system documentation for details. By identifying the destination |
| directory, Subversion will be able to dynamically load repository |
| access plugins. If you try to do a checkout and see an error |
| like: |
| |
| svn_error: #21068 : <Bad URL passed to RA layer> |
| Unrecognized URL scheme: http://svn.collab.net/repos/svn/trunk |
| |
| It probably means that the dynamic loader/linker can't find all |
| of the libsvn_* libraries. |
| |
| Note that if you commonly build with the -jN option to make, the |
| make step above may fail, because we don't ensure that third |
| party libraries in our source tree will finish building before |
| subversion itself. If you want to use -jN, use the following |
| instead: |
| |
| $ ./configure --enable-maintainer-mode --disable-shared |
| $ make -jN external-all |
| $ make -jN local-all |
| $ make check |
| # make install |
| |
| |
| C. Building under Unix in Different Directories |
| -------------------------------------------- |
| |
| It is possible to configure and build Subversion on Unix in a |
| directory other than the working copy. For example |
| |
| $ svn co http://svn.collab.net/repos/svn/trunk -d svn |
| $ cd svn |
| $ # get neon/db/apr as required |
| $ chmod +x autogen.sh |
| $ ./autogen.sh |
| $ mkdir ../obj |
| $ cd ../obj |
| $ ../svn/configure [...with options as appropriate...] |
| $ make |
| |
| puts the Subversion working copy in the directory svn and builds |
| it in a separate, parallel directory obj. |
| |
| Why would you want to do this? Well there are a number of |
| reasons... |
| |
| * You may prefer to avoid "polluting" the working copy with |
| files generated during the build. |
| |
| * You may want to put the build directory and the working |
| copy on different physical disks to improve performance. |
| |
| * You may want to separate source and object code and only |
| backup the source. |
| |
| * You may want to remote mount the working copy on multiple |
| machines, and build for different machines from the same |
| working copy. |
| |
| * You may want to build multiple configurations from the |
| same working copy. |
| |
| The last reason above is possibly the most useful. For instance |
| you can have separate debug and optimised builds each using the |
| same working copy. Or you may want a client only build and a |
| client-server build. Using multiple build directories you can |
| rebuild any or all configurations after an edit without the need |
| to either clean and reconfigure, or identify and copy changes |
| into a another working copy. |
| |
| |
| D. Bootstrapping from a Zip File under Windows |
| ------------------------------------------- |
| |
| Of all the ways of getting a Subversion client, this is the |
| easiest. Just download the ZIP file, run your unzipping utility |
| (WinZIP, ZipGenius, UltimateZIP, FreeZIP, whatever) and extract |
| the DLLs and EXEs to a directory of your choice. Included in |
| the download is the SVN client, the SVNADMIN administration |
| tool, and the SVNLOOK reporting tool. |
| |
| Now open a DOS box (run either "cmd" or "command" from the |
| Start menu's "Run..." menu option), change to the directory you |
| installed the executables into, and run: |
| |
| C:\test>svn co http://svn.collab.net/repos/svn/trunk -d svn |
| |
| This will get the latest Subversion sources and put them into the |
| "svn" subdirectory. |
| |
| If you want to use this client for more than just downloading |
| the latest sources, though, you will probably need to make sure |
| that Subversion has access to the diff.exe and diff3.exe |
| programs, as described in section I.10. |
| |
| |
| E. Building the Latest Source under Windows |
| ---------------------------------------- |
| |
| (These instructions assume you have already installed Subversion |
| and checked out a Subversion working copy. See the section |
| "Bootstrapping From A Zip File Under Windows" above for more.) |
| |
| There is some support for building Subversion on Win32 platforms. |
| The project files included in the source tree are from Microsoft |
| Visual C++ 6.x; earlier versions of the compiler are not |
| supported at this time. |
| |
| To build the client components, you'll need a copy of neon |
| 0.21.1. See section I.5 for details on where to get one and |
| what to do with it when you get it. |
| |
| [NOTE: The neon library supports secure connections with OpenSSL |
| and on-the-wire compression with zlib. If you want to use |
| those features, you should edit the file |
| |
| <SVN>\build\win32\build_neon.bat |
| |
| to point to the appropriate directories. |
| |
| See Section I.11 for more details. |
| |
| If you want to build the (local) server components, you'll also |
| need a copy of Berkeley DB, version 4.0.14 or newer. Details are |
| in Section I.6. For your convenience, there is also a binary |
| distibution on the Subversion downloads page |
| |
| http://subversion.tigris.org/ProjectDownloadList |
| |
| The file there is named |
| |
| db-4.0.14-win32.zip |
| |
| Unpack the distribution into the root directory of the Subversion |
| source tree as <SVN>\db4-win32. It's a good idea to add |
| <SVN>\db4-win32\bin to your PATH, so that Subversion can find the |
| Berkeley DB DLLs. |
| |
| [NOTE: This binary package of Berkeley DB is provided for |
| convenience only. Please don't address questions about |
| Berkeley DB that aren't directly related to using Subversion |
| to the project list.] |
| |
| If you build Berkeley DB from the source, you will have to copy |
| the file ..db-4.0.14\build_win32\db.h to <SVN>\db4-win32\include, |
| and all the import libraries to <SVN>\db4-win32\lib. Again, the |
| DLLs should be somewhere in your path. |
| |
| The workspace `subversion.dsw' at the top of the source tree |
| includes all the necessary projects. Right now, only static |
| libraries are built. The "__build__" project (active by default) |
| builds all the libraries and programs. The "__check__" project |
| builds the test drivers. |
| |
| You will have to edit the file svn_private_config.hw to set the |
| correct paths for diff and diff3. |
| |
| [NOTE: There have been rumours that Subversion on Win32 can be built |
| using the latest cygwin. ymmv.] |
| |
| |
| |
| III. BUILDING A SUBVERSION SERVER |
| ============================ |
| |
| A. Setting Up Apache |
| ----------------- |
| |
| (Following the BOOTSTRAPPING FROM RPM procedures above will install and |
| build the latest Subversion server for Linux RedHat 7.1, 7.2, and PPC |
| Linux systems *IF* the apache-devel-2.0.36 or greater package is already |
| installed when the SUBVERSION RPM is built.) |
| |
| |
| 1. Obtaining and Installing Apache 2.0 |
| |
| Checkout the "httpd-2.0" cvs module from apache.org. If you have |
| questions about the Apache 2.0 build, please consult the HTTPD |
| install documentation: http://httpd.apache.org/docs-2.0/install.html |
| Place this module wherever you wish; it's an independent project. |
| |
| $ cvs -d :pserver:anoncvs@cvs.apache.org:/home/cvspublic login |
| (password 'anoncvs') |
| |
| $ cvs -d :pserver:anoncvs@cvs.apache.org:/home/cvspublic co httpd-2.0 |
| |
| Checkout the "apr" and "apr-util" modules into the srclib/ directory: |
| |
| $ cd httpd-2.0/srclib |
| $ cvs -d :pserver:anoncvs@cvs.apache.org:/home/cvspublic co apr |
| $ cvs -d :pserver:anoncvs@cvs.apache.org:/home/cvspublic co apr-util |
| |
| At the top of the httpd-2.0 tree: |
| |
| $ ./buildconf |
| $ ./configure --enable-dav --enable-so --prefix=/usr/local/apache2 |
| |
| The first arg says to build mod_dav. |
| The second arg says to enable shared module support which is needed |
| for a typical compile of mod_dav_svn (see below). |
| The third arg is where you will ultimately install apache. |
| |
| Note: if you build Subversion with --enable-maintainer-mode, |
| then do the same for Apache. mod_dav_svn uses Apache's |
| maintainer-mode stuff from its headers, so you want to ensure |
| that Apache is built with the same assumption. Just add |
| --enable-maintainer-mode to the configure line above. |
| |
| Note: if you have multiple db versions installed on your system, |
| Apache might link to a different one than Subversion, causing |
| failures when accessing the repository through Apache. To prevent |
| this from happening, you have to tell Apache which db version to |
| use and where to find db. Add --with-dbm=db4 and |
| --with-berkeley-db=/usr/local/BerkeleyDB.4.0 to the configure |
| line. Make sure this is the same db as the one Subversion uses. |
| This note assumes you have installed Berkeley DB 4.0.14 |
| at its default locations. For more info about the db requirement, |
| see section I.6. |
| |
| You may also want to include other modules in your build. Add |
| --enable-ssl to turn on SSL support, for example. Consult the |
| Apache documentation for more details. |
| |
| All instructions below assume you configured Apache to install |
| under /usr/local/apache2/; substitute appropriately if you |
| chose some other location. |
| |
| Compile and install apache: |
| |
| $ make depend && make && make install |
| |
| |
| B. Making and Installing the Subversion Server |
| ------------------------------------------- |
| |
| Go back into your subversion working copy and run ./autogen.sh if |
| you need to. Then, assuming Apache HTTP 2.0 is installed in the |
| standard location, run: |
| |
| $ ./configure |
| |
| Note: do *not* configure subversion with "--disable-shared"! |
| mod_dav_svn *must* be built as a shared library, and it will |
| look for other libsvn_*.so libraries on your system. |
| |
| If you see a warning message that the build of mod_dav_svn is being |
| skipped, this may be because you have Apache HTTP 2.0 installed |
| in a non-standard location. You can use the "--with-apxs=" option |
| to locate the apxs script: |
| |
| $ ./configure --with-apxs=/home/fred/apache2/bin/apxs |
| |
| |
| Note: it *is* possible to build mod_dav_svn as a static library |
| and link it directly into Apache. Possible, but painful. Stick |
| with the shared library for now; if you can't, then ask. |
| |
| $ rm /usr/local/lib/libsvn* |
| |
| If you have old subversion libraries sitting on your system, |
| libtool will link them instead of the `fresh' ones in your tree. |
| Remove them before building subversion. |
| |
| $ make clean && make && make install |
| |
| After the make install, the Subversion shared libraries are in |
| /usr/local/lib/. mod_dav_svn.so should be installed in |
| /usr/local/apache2/modules/. |
| |
| |
| 1. Building the Server on Windows [EXPERIMENTAL] |
| |
| The mod_dav_svn module can now be built on Windows, using the |
| mod_dav_svn project in the workspace `subversion.dsw'. You must |
| have Apache source tree installed in parallel to the Subversion |
| source tree, and will use the apr and apr-util libraries from |
| the Apache sources; like this: |
| |
| .../ |
| svn/ |
| db4-win32/ |
| subversion/ |
| mod_dav_svn/ |
| ... |
| httpd-2.0/ |
| srclib/ |
| apr/ |
| apr-util/ |
| ... |
| |
| You must have Berkeley DB available, as described in II.E. |
| First, buld (and install) Apache and the Subversion client and |
| local server. Then select mod_dav_svn as the active project, |
| build it, and copy mod_dav_svn.so to the Apache modules |
| directory. Apache configuration is the same as on Unix. |
| |
| |
| C. Configuring Apache for Subversion |
| --------------------------------- |
| |
| The following assumes you have already created a repository. |
| For documentation on how to do that, see README. |
| |
| Add this to the *bottom* of /usr/local/apache2/conf/httpd.conf: |
| |
| <Location /svn/repos> |
| DAV svn |
| SVNPath /absolute/path/to/repository |
| </Location> |
| |
| This will give anyone unrestricted access to the repository. If |
| you want limited access, read or write, you add these lines to |
| the Location block: |
| |
| AuthType Basic |
| AuthName "Subversion repository" |
| AuthUserFile /my/svn/user/passwd/file |
| |
| And: |
| |
| a) For a read/write restricted repository: |
| |
| Require valid-user |
| |
| b) For a write restricted repository: |
| |
| <LimitExcept GET PROPFIND OPTIONS REPORT> |
| Require valid-user |
| </LimitExcept> |
| |
| c) For seperate restricted read and write access: |
| |
| AuthGroupFile /my/svn/group/file |
| |
| <LimitExcept GET PROPFIND OPTIONS REPORT> |
| Require group svn_committers |
| </LimitExcept> |
| |
| <Limit GET PROPFIND OPTIONS REPORT> |
| Require group svn_committers |
| Require group svn_readers |
| </Limit> |
| |
| These are only a few simple examples. For a complete tutorial |
| on Apache access contol, please consider taking a look at the |
| tutorials found under the "Security" on the following page: |
| http://httpd.apache.org/docs-2.0/misc/tutorials.html |
| |
| In order for 'svn cp' to work (which is actually implemented as a |
| DAV COPY command), mod_dav needs to be able to be able to determine |
| the hostname of the server. A standard way of doing this is to use |
| Apache's ServerName directive to set the server's hostname. Edit |
| your /usr/local/apache2/conf/httpd.conf to include: |
| |
| ServerName svn.myserver.org |
| |
| If you are using virtual hosting through Apache's NameVirtualHost |
| directive, you may need to use the ServerAlias directive to specify |
| additional names that your server is known by. |
| |
| NOTE: If you are unfamiliar with an Apache directive, or not exactly |
| sure about what it does, don't hesitate to look it up in the |
| documentation: http://httpd.apache.org/docs-2.0/mod/directives.html. |
| |
| NOTE: Make sure that the user 'nobody' (or whatever UID the |
| httpd process runs as) has permission to read and write the |
| Berkeley DB files! This is a very common problem. |
| |
| |
| D. Running and Testing |
| ------------------- |
| |
| Fire up apache 2.0: |
| |
| $ /usr/local/apache2/bin/apachectl stop |
| $ /usr/local/apache2/bin/apachectl start |
| |
| Check /usr/local/apache2/logs/error_log to make sure it started |
| up okay. |
| |
| Try doing a network checkout from the repository: |
| |
| $ svn co http://localhost/svn/repos -d wc |
| |
| The most common reason this might fail is permission problems |
| reading the repository db files. If the checkout fails, chmod |
| 777 and try again. |
| |
| You can see all of mod_dav_svn's complaints in the Apache |
| error logfile, /usr/local/apache2/logs/error_log. For more |
| information about tracing problems, see "Debugging the server" |
| in the HACKING file. |
