| # Licensed to the Apache Software Foundation (ASF) under one | |
| # or more contributor license agreements. See the NOTICE file | |
| # distributed with this work for additional information | |
| # regarding copyright ownership. The ASF licenses this file | |
| # to you under the Apache License, Version 2.0 (the | |
| # "License"); you may not use this file except in compliance | |
| # with the License. You may obtain a copy of the License at | |
| # | |
| # http://www.apache.org/licenses/LICENSE-2.0 | |
| # | |
| # Unless required by applicable law or agreed to in writing, | |
| # software distributed under the License is distributed on an | |
| # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY | |
| # KIND, either express or implied. See the License for the | |
| # specific language governing permissions and limitations | |
| # under the License. | |
| CONFIG=debug | |
| #CONFIG=release | |
| # will be appended to 'svn --version --quiet' output; set to zero to suppress | |
| BUILDDESCR=0 | |
| MSBUILD=msbuild subversion_vcnet.sln /nologo /v:q /p:Configuration=$(CONFIG) | |
| CP=cp | |
| TEEPATH=C:\Path\To\Parent\Of\tee\dot\exe\and\other\utils\as\needed\see\below.80 | |
| SOURCESDIR=C:\Path\To\Dependency\Sources | |
| SVNDIR=C:\Path\To\Subversion\SourceTree | |
| TARGETDIR=$(SVNDIR)\dist | |
| INSTALLDIR=E:\svn | |
| EXPATVER=2.0.0 | |
| HTTPDVER=2.2.13 | |
| SERFVER=1.1.0 | |
| OPENSSLVER=0.9.8k | |
| SQLITEVER=3.6.3 | |
| ZLIBVER=1.2.3 | |
| #ENABLE_ML=--enable-ml | |
| PATCHESDIR=$(HOME)\mydiffs\svn | |
| OPENSSLDIR=$(SOURCESDIR)\openssl-$(OPENSSLVER) | |
| EXPATDIR=$(SOURCESDIR)\expat-$(EXPATVER) | |
| HTTPDDIR=$(SOURCESDIR)\httpd-$(HTTPDVER) | |
| #APRDIR=$(SOURCESDIR)\apr | |
| #APRUTILDIR=$(SOURCESDIR)\apr-util | |
| #APRICONVDIR=$(SOURCESDIR)\apr-iconv | |
| APRDIR=$(HTTPDDIR)\srclib\apr | |
| APRUTILDIR=$(HTTPDDIR)\srclib\apr-util | |
| APRICONVDIR=$(HTTPDDIR)\srclib\apr-iconv | |
| SQLITEDIR=$(SOURCESDIR)\sqlite-amalgamation | |
| ZLIBDIR=$(SOURCESDIR)\zlib-$(ZLIBVER) | |
| SERFDIR=$(SOURCESDIR)\serf-$(SERFVER) | |
| all: | |
| @echo Available targets: newfiles versionstamp | |
| @echo Available targets: config | |
| @echo Available targets: progname testname | |
| @echo Available targets: all1 all2 | |
| @echo Available targets: buildlog package | |
| @echo Available targets: check checklog | |
| TARGETDIRset: SVNDIRset | |
| if X$(TARGETDIR) == X exit 1 | |
| SVNDIRset: | |
| if X$(SVNDIR) == X exit 1 | |
| removealllocalmods: | |
| svn revert -R . | |
| svn status --no-ignore | xargs rm -rf -- | |
| svn status --no-ignore | |
| # last, in case of wc format bump | |
| rmdir /s /q dist local Release Debug | |
| newfiles: SVNDIRset | |
| xcopy /s /y $(PATCHESDIR)\newfiles $(SVNDIR) | |
| versionstamp: | |
| perl tools\dev\windows-build\document-version.pl subversion\include\svn_version.h $(TARGETDIR) $(SVNDIR) $(BUILDDESCR) | |
| svn diff subversion\include\svn_version.h | |
| cleanup1: TARGETDIR | |
| del log.all-tests log.gen-make.py log.devenv log.win-tests | |
| rmdir /s /q $(TARGETDIR)\bin | |
| clean: | |
| @echo "Sorry, '$@' target not yet implemented" >&2 | |
| # TODO also copy sqlite3.dll if it's used | |
| install: TARGETDIRset | |
| test ! -d $(INSTALLDIR) | |
| mkdir $(INSTALLDIR)\bin | |
| pushd $(TARGETDIR)\bin &&\ | |
| $(CP) *.exe $(INSTALLDIR)/bin &&\ | |
| $(CP) libapr*.dll $(INSTALLDIR)/bin &&\ | |
| $(CP) libeay32.dll $(INSTALLDIR)/bin &&\ | |
| $(CP) ssleay32.dll $(INSTALLDIR)/bin &&\ | |
| $(CP) libsvn*.dll $(INSTALLDIR)/bin &&\ | |
| $(CP) ..\*.diff $(INSTALLDIR) &&\ | |
| popd | |
| targetdir: TARGETDIRset | |
| test -d $(TARGETDIR)\bin || mkdir $(TARGETDIR)\bin | |
| # TODO: pass --with-apr-* if you don't have httpd; make --with-* args optional | |
| config: targetdir | |
| python gen-make.py --$(CONFIG) --with-httpd=$(HTTPDDIR) --with-serf=$(SERFDIR) --with-openssl=$(OPENSSLDIR) --with-sqlite=$(SQLITEDIR) --with-zlib=$(ZLIBDIR) $(ENABLE_ML) --vsnet-version=2008 -t vcproj 2>&1 | tee log.gen-make | |
| # Visual Studio 2008 | |
| libsvn_auth_gnome_keyring libsvn_auth_kwallet libsvn_client libsvn_delta libsvn_diff libsvn_fs libsvn_fs_base libsvn_fs_fs libsvn_fs_util libsvn_ra libsvn_ra_local libsvn_ra_serf libsvn_ra_svn libsvn_repos libsvn_subr libsvn_wc: targetdir | |
| $(MSBUILD) /t:Libraries\$@ | |
| $(MAKE) package | |
| svn svnadmin svndumpfilter svnlook svnmucc svnserve svnsync svnversion svnrdump entries-dump: targetdir | |
| $(MSBUILD) /t:Programs\$@ | |
| $(MAKE) package | |
| auth-test cache-test changes-test checksum-test client-test compat-test config-test db-test diff-diff3-test dir-delta-editor dirent_uri-test error-test fs-base-test fs-pack-test fs-test hashdump-test key-test locks-test mergeinfo-test opt-test path-test ra-local-test random-test repos-test revision-test skel-test stream-test string-test strings-reps-test svn_test_fs svn_test_main svndiff-test target-test time-test translate-test tree-conflict-data-test utf-test vdelta-test window-test: targetdir | |
| $(MSBUILD) /t:Tests\$@ | |
| $(MAKE) package | |
| __ALL__ __ALL_TESTS__: targetdir | |
| $(MSBUILD) /t:$@ | |
| $(MAKE) package | |
| all1: targetdir | |
| $(MSBUILD) /t:__ALL__ | |
| $(MAKE) package | |
| @echo TODO entries-test | |
| all2: targetdir | |
| $(MSBUILD) /t:__ALL_TESTS__ | |
| $(MAKE) package | |
| package: | |
| test -d $(SVNDIR)\$(CONFIG)\Subversion\tests\cmdline || mkdir $(SVNDIR)\$(CONFIG)\Subversion\tests\cmdline | |
| test -d $(TARGETDIR)\bin || mkdir $(TARGETDIR)\bin | |
| for %%i in (svn svnadmin svndumpfilter svnlook svnserve svnsync svnversion svnrdump svnmucc) do @$(CP) $(CONFIG)\subversion\%%i\%%i.exe $(TARGETDIR)\bin | |
| for %%i in (diff diff3 diff4) do @if exist $(CONFIG)\tools\diff\%%i.exe $(CP) $(CONFIG)\tools\diff\%%i.exe $(TARGETDIR)\bin | |
| $(CP) $(APRDIR)\$(CONFIG)/*.dll $(TARGETDIR)\bin | |
| $(CP) $(APRUTILDIR)\$(CONFIG)/*.dll $(TARGETDIR)\bin | |
| $(CP) $(APRICONVDIR)\$(CONFIG)/*.dll $(TARGETDIR)\bin | |
| $(CP) $(OPENSSLDIR)\out32dll/*.dll $(TARGETDIR)\bin | |
| for %%i in (client delta diff fs ra repos subr wc) do @$(CP) $(CONFIG)\subversion\libsvn_%%i\*.dll $(TARGETDIR)\bin | |
| buildlog: | |
| gvim -c "set autoread nowrap" -c "/\(\<0 \)\@<!error" log.devenv | |
| # 'make check' | |
| # TODO: also support svncheck, etc | |
| check: | |
| echo %date% %time% :: Starting fsfs file >> log.all-tests | |
| python win-tests.py --verbose --cleanup --bin=$(TARGETDIR)\bin --$(CONFIG) -f fsfs 2>&1 | %TEEPATH%\tee log.win-tests | |
| echo %date% %time% :: Finished fsfs file >> log.all-tests | |
| # check errors | |
| checklog: | |
| gvim -c "set autoread" -p log.win-tests *\*.log "+silent! /X\@<!FAIL\|XPASS" | |
| tags: . | |
| REM vim +Ctags +quit | |
| ctags -R . | |
| $(CP) tags ..\svntags |