blob: f430f8867b6f060c018428fd8abb45672c8a0f40 [file] [log] [blame]
# -*- Makefile -*-
#
# $Id$
#
# main makefile to build and test the C++ Standard library
#
########################################################################
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed
# with this work for additional information regarding copyright
# ownership. The ASF licenses this file to you under the Apache
# License, Version 2.0 (the "License"); you may not use this file
# except in compliance with the License. You may obtain a copy of
# the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
# implied. See the License for the specific language governing
# permissions and limitations under the License.
#
# Copyright 1999-2007 Rogue Wave Software, Inc.
#
########################################################################
#
# Usage:
#
# Invoke from $TOPDIR to create the build directory tree, $BUILDDIR
# configure and build the library, example programs, utility programs
# testsuite driver, and the testsuite.
#
# $ make [ BUILDTYPE=<build-type> ] \
# [ BUILDDIR=<build-dir> ] \
# [ CONFIG=<config-file> ] \
# [ PHDIR=<plumhall-testsuite-source-dir> ]
# [ <targets> ]
#
# From $BUILDDIR/include to [re]configure or just run one or more tests:
#
# $ make [ config | config.h | <target> ... ]
#
# From $TOPDIR or $BUILDDIR to configure if necessary and build the lib,
# tests, plumhall testsuite, and examples:
#
# $ make [ lib ] [ bin ] [ rwtest ] [ tests ] [ phtst ] [ examples ]
#
# From $TOPDIR or $BUILDDIR to build the lib, tests, and examples, run the
# built executables, and (by default, unless DRYRUN is non-empty)
# post results in Perforce:
#
# $ make run | runall | run_all [ RUN=<executables> | ALL ]
#
# For every invocation of make the variables CPPOPTS, CXXOPTS, LDOPTS,
# and RUNOPTS can be set on the command line to pass additional options to
# the preprocessor, compiler, linker, and the runall.sh script, respectively.
#
# The variable MAKE can be set to contain any additional make arguments
# to be passed to recursive invokations of make (e.g., make -j).
#
# The variable SHELL can be defined to override the default shell, /bin/sh.
#
########################################################################
#
# Targets:
#
# builddir - creates the build directory (BUILDDIR) and makefile.in
#
# config - performs configuration tests and creates the configuration
# header, $(BUILDDIR)/include/config.h
#
# libstd - builds the library
#
# rwtest - builds the testsuite driver
#
# tests - builds the testsuite
#
# examples - builds the example programs
#
# util - builds the utility programs
#
##############################################################################
#
# Nonstandard variables:
#
# BUILDDIR - (optional) the root of the build directory tree,
# the default value is $(TOPDIR)/build
#
# BUILDTAG - (optional) a string appended to a report filename
# the default value is empty
#
# BUILDTYPE - (optional) one of
# 8s, 8d, 11s, 11d, 12s, 12d, 15s, 15d,
# 8S, 8D, 11S, 11D, 12S, 12D, 15S, 15D
# where the capitalized forms are wide forms of the others
# the default value is 11s
#
# BUILDMODE - (optional) a comma separated list of at most one of each of
# debug, optimized, shared
# threads, pthreads, dcethreads, wide
# where
# * debug turns on debugging and disables optimization
# * optimized enables optimization and disables debugging
# * shared creates and links with a shared library
# * threads uses Solaris threads for thread safety
# * pthreads uses POSIX threads for thread safety
# * dcethreads uses DCE threads for thread safety
# * wide uses wide (typically 64-bit) memory model
# the default value is debug (same as 11s)
#
# CATFILE - name of library catalog file to be generated - see gencat(1)
#
# CCVER - compiler version (must contain no spaces)
#
# DEPENDFLAGS - preprocessor flags used to generate dependencies
#
# LIBBASE - name of the library w/o the suffix suitable
# for use by the linker after the -l option
#
# DEPENDDIR - the subdirectory where dependency files will reside
#
# LIBM - the linker option to link with the math library
# (typically -lm, may be unnecessary or not even exist
# on some systems)
#
# LIBNAME - full name of the library being built
#
# LIBVER - library version number in the <major>.<minor>.<micro> format
#
# LIBSUFFIX - archive/shared library suffix (defaults to a)
#
# LDSOFLAGS - linker flags used when building a shared lib
#
# LDLIBS - set of system libraries to link executables with
#
# PHDIR - directory containing the PlumHall testsuite distribution
# (e.g., ".../lvs99a")
#
# PHWARNFLAGS - extra flags to suppress warnings coming from PlumHall tests
#
# PICFLAGS - flags to generate Position Independent Code
# for shared libraries
#
# PREFIX - the root of the installation directory where the bin/
# include/ and lib/ subdirectories will be rooted
#
# PRELINKFLAGS - flags passed to the prelinker
#
# RUNFLAGS - default options passed to runall.sh when running executables
# RUNOPTS - additional options to pass to runall.sh (empty by default)
#
# SHARED - set to `true' if building a shared lib, `false' otherwise
#
# WARNFLAGS - any compiler warning options
#
# WITH_PURIFY - set to `true' to build with purify. additional flags
# can be specified in PURIFYFLAGS.
#
# WITH_CADVISE - set to `true' to build with cadvise. additional flags
# can be specified in CADVISEFLAGS.
#
########################################################################
SHELL = /bin/sh
# define the value of OSNAME first so that it can be used in *.config files
OSNAME := $(shell uname)
# provide a value if it isn't already set by (an older version of) make
ifeq ($(CURDIR),)
ifneq ($(PWD),)
# use the shell PWD variable to avoid expanding NFS paths
# as mount points instead of the user-visible directories
CURDIR := $(PWD)
else
CURDIR := $(shell pwd)
endif
endif
-include ./makefile.in
# buildpath must not be defined
ifneq ($(buildpath),)
$(error "buildpath not empty ('$(buildpath)')")
endif
# check to see if BUILDDIR is defined
ifeq ($(BUILDDIR),)
# the default value is $(TOPDIR)/build
buildpath = $(CURDIR)/build
else
# see if BUILDDIR is an absolute pathname
ifeq ($(filter /%,$(BUILDDIR)),)
# ...if not, prepend the name of CURDIR
buildpath = $(CURDIR)/$(BUILDDIR)
else
# ...otherwise, make sure it doesn't refer to TOPDIR
ifeq ($(BUILDDIR),$(TOPDIR))
$(error "BUILDDIR ('$(BUILDDIR)') is same as TOPDIR ('$(TOPDIR)')")
endif
buildpath = $(BUILDDIR)
endif # ifneq ($(filter /%,$(BUILDDIR)),)
endif # ifneq ($(BUILDDIR),)
ifeq ($(filter /%,$(buildpath)),)
# buildpath must be an absolute pathname
$(error "buildpath=$(buildpath): not an absolute pathname")
endif
ifeq ($(buildpath),$(TOPDIR))
# buildpath must be distinct from TOPDIR
$(error "buildpath=$(buildpath): not distinct from TOPDIR=$(TOPDIR)")
endif
MAKEFILE_IN = $(buildpath)/makefile.in
-include $(MAKEFILE_IN)
INCDIR = $(buildpath)/include
LIBDIR = $(buildpath)/lib
BINDIR = $(buildpath)/bin
EXMDIR = $(buildpath)/examples
TSTDIR = $(buildpath)/tests
PHTSTDIR = $(buildpath)/plumhall
MAKEDIRS = $(buildpath) \
$(LIBDIR) \
$(buildpath)/rwtest \
$(BINDIR) \
$(buildpath)/nls \
$(TSTDIR) \
$(PHTSTDIR) \
$(EXMDIR) \
$(INCDIR)
# file to write log of the build to
LOGFILE = /dev/null
# convert a relative pathname to an absolute one
ifneq ($(shell echo $(LOGFILE) | sed -n "s/^ *\/.*/\//p"),/)
LOGFILE := $(buildpath)/$(LOGFILE)
endif
ifeq ($(TOPDIR),)
# this is the first invocation of make in TOPDIR
in_topdir = 1
else
ifeq ($(TOPDIR),$(CURDIR))
# this is a recursive invocation of make in TOPDIR
in_topdir = 1
endif
endif
ifeq ($(in_topdir),1)
######################################################################
# THIS BLOCK IS EVALUATED ONLY WHEN MAKE IS INVOKED IN TOPDIR
######################################################################
# try to determine configuration (unless specified on the command line)
# invoke $(SHELL) from within the $(shell) function to silence shell
# any error messages when the compiler isn't found
ifeq ($(CONFIG),)
ifeq ($(shell $(SHELL) -c "g++ -v" >/dev/null 2>&1 \
&& echo $$?),0)
# use gcc on every OS by default
CONFIG = gcc.config
else
ifeq ($(OSNAME),AIX)
# check for VisualAge on AIX
# avoid comparing the exit status to 0 since VAC++ return 249...
ifneq ($(shell $(SHELL) -c "xlC -qversion" >/dev/null 2>&1; \
echo $$?),127)
CONFIG = vacpp.config
endif
else
ifeq ($(OSNAME),HP-UX)
# check for aCC on HP-UX
ifeq ($(shell $(SHELL) -c "aCC -V" >/dev/null 2>&1 && echo $$?),0)
CONFIG = acc.config
endif
else
ifeq ($(OSNAME),IRIX64)
# check for MIPSpro on IRIX
ifeq ($(shell $(SHELL) -c "CC -v" >/dev/null 2>&1 && echo $$?),0)
CONFIG = mipspro.config
endif
else
ifeq ($(OSNAME),OSF1)
# check for Compaq C++ on Tru64 UNIX
ifeq ($(shell $(SHELL) -c "cxx -V" >/dev/null 2>&1; echo $$?),0)
CONFIG = osf_cxx.config
endif
else
ifeq ($(OSNAME),SunOS)
# check for SunPro on Solaris
ifeq ($(shell $(SHELL) -c "CC -V" >/dev/null 2>&1 \
&& echo $$?),0)
CONFIG = sunpro.config
endif
endif # SunOS
endif # OSF1
endif # IRIX64
endif # HP-UX
endif # AIX
endif # gcc
ifeq ($(CONFIG),)
$(error "could not find a config file for this platform: $(OSNAME)")
else
$(warning "CONFIG not specified, using $(CONFIG)")
endif
endif # ifeq ($(CONFIG),)
ifeq ($(CONFIG),)
$(error "CONFIG not defined")
endif
# decode the BUILDTYPE value and set BUILDMODE correspondingly
ifeq ($(BUILDTYPE),8s)
bmode = optimized,narrow
endif # ifeq ($(BUILDTYPE),8s)
ifeq ($(BUILDTYPE),8S)
bmode = optimized,wide
endif # ifeq ($(BUILDTYPE),8s)
ifeq ($(BUILDTYPE),8d)
bmode = shared,optimized,narrow
endif # ifeq ($(BUILDTYPE),8d)
ifeq ($(BUILDTYPE),8D)
bmode = shared,optimized,wide
endif # ifeq ($(BUILDTYPE),8d)
ifeq ($(BUILDTYPE),11s)
bmode = debug,narrow
endif # ifeq ($(BUILDTYPE),11s)
ifeq ($(BUILDTYPE),11S)
bmode = debug,wide
endif # ifeq ($(BUILDTYPE),11s)
# 11d - single-thread, debug, shared
ifeq ($(BUILDTYPE),11d)
bmode = debug,shared,narrow
endif # ifeq ($(BUILDTYPE),11d)
ifeq ($(BUILDTYPE),11D)
bmode = debug,shared,wide
endif # ifeq ($(BUILDTYPE),11d)
# 12s - multi-thread, optimized, static
ifeq ($(BUILDTYPE),12s)
bmode = pthreads,optimized,narrow
endif # ifeq ($(BUILDTYPE),12s)
ifeq ($(BUILDTYPE),12S)
bmode = pthreads,optimized,wide
endif # ifeq ($(BUILDTYPE),12s)
# 12d - multi-thread, optimized, shared
ifeq ($(BUILDTYPE),12d)
bmode = pthreads,shared,optimized,narrow
endif # ifeq ($(BUILDTYPE),12d)
ifeq ($(BUILDTYPE),12D)
bmode = pthreads,shared,optimized,wide
endif # ifeq ($(BUILDTYPE),12d)
# 15s - multi-thread, debug, static
ifeq ($(BUILDTYPE),15s)
bmode = debug,pthreads,narrow
endif # ifeq ($(BUILDTYPE),15s)
ifeq ($(BUILDTYPE),15S)
bmode = debug,pthreads,wide
endif # ifeq ($(BUILDTYPE),15s)
# 15d - multi-thread, debug, shared
ifeq ($(BUILDTYPE),15d)
bmode = debug,pthreads,shared,narrow
endif # ifeq ($(BUILDTYPE),15d)
ifeq ($(BUILDTYPE),15D)
bmode = debug,pthreads,shared,wide
endif # ifeq ($(BUILDTYPE),15d)
ifneq ($(BUILDTYPE),)
ifeq ($(bmode),)
$(error "unknown BUILDTYPE value: '$(BUILDTYPE)'")
endif
endif
ifeq ($(TOPDIR),)
# during the first (non-recursive) invocation only,
# check to make sure at most one of BUILDTYPE and BUILDMODE
# is defined
ifneq ($(BUILDTYPE),)
ifneq ($(BUILDMODE),)
$(error "at most one of BUILDMODE and BUILDTYPE may be defined")
else
BUILDMODE=$(bmode)
endif
endif
TOPDIR = $(CURDIR)
endif
ifeq ($(filter /%,$(CONFIG)),)
ifeq ($(filter %/%,$(CONFIG)),)
configpath = $(TOPDIR)/etc/config/$(CONFIG)
else
configpath = $(TOPDIR)/$(CONFIG)
endif
else
configpath = $(CONFIG)
endif
include $(configpath)
ETCDIR = $(TOPDIR)/etc/config
ifeq ($(findstring debug,$(BUILDMODE)),debug)
ifeq ($(findstring optimized,$(BUILDMODE)),optimized)
$(error "cannot have both debug and optimized options")
endif
endif
# unless $(LD) is set, use the same command to link as to compile
ifeq ($(LD),ld)
LD = $(CXX)
endif
ifeq ($(AS_EXT),)
# assume the .S extension for assembly files by default,
# unless specified otherwise in the config file
AS_EXT = ".S"
endif
# debug/optimized
ifeq ($(findstring debug,$(BUILDMODE)),debug)
CXXFLAGS += $(DEBUG_CXXFLAGS)
CPPFLAGS += -D_RWSTDDEBUG $(DEBUG_CPPFLAGS)
else
# TODO - check the number, check if the compiler supports it
ifeq ($(findstring optimized,$(BUILDMODE)),optimized)
CXXFLAGS += $(OPTMZ_CXXFLAGS)
CPPFLAGS += $(OPTMZ_CPPFLAGS)
endif
endif
ifeq ($(SHARED_SUFFIX),)
# shared library suffix default (may be set in config file)
SHARED_SUFFIX = .so
endif
ifeq ($(STATIC_SUFFIX),)
# archive library suffix default (may be set in config file)
STATIC_SUFFIX = .a
endif
# shared/archive
ifeq ($(findstring shared,$(BUILDMODE)),shared)
CXXFLAGS += $(SHARED_CXXFLAGS)
CPPFLAGS += $(SHARED_CPPFLAGS)
LDFLAGS += $(SHARED_LDFLAGS)
LIBSUFFIX = $(SHARED_SUFFIX)
else
CXXFLAGS += $(STATIC_CXXFLAGS)
CPPFLAGS += $(STATIC_CPPFLAGS)
LDFLAGS += $(STATIC_LDFLAGS)
LIBSUFFIX = $(STATIC_SUFFIX)
# not applicable to non-shared builds
PICFLAGS =
LDSOFLAGS =
RPATH =
endif
# POSIX, Solaris, DCE threads
ifeq ($(findstring pthreads,$(BUILDMODE)),pthreads)
CPPFLAGS += $(MULTI_CPPFLAGS_POSIX)
LDFLAGS += $(MULTI_LDFLAGS_POSIX)
else
ifeq ($(findstring dcethreads,$(BUILDMODE)),dcethreads)
ifneq ($(OSNAME),OSF1)
$(error "DCE threads not suported on this platform:" $(OSNAME))
endif
CPPFLAGS += $(MULTI_CPPFLAGS_DCE)
LDFLAGS += $(MULTI_LDFLAGS_DCE)
else
ifeq ($(findstring threads,$(BUILDMODE)),threads)
ifneq ($(OSNAME),SunOS)
$(error "Solaris threads not suported on this platform: " $(OSNAME))
endif
CPPFLAGS += $(MULTI_CPPFLAGS_SOLARIS)
LDFLAGS += $(MULTI_LDFLAGS_SOLARIS)
else
CPPFLAGS += $(SINGL_CPPFLAGS)
LDFLAGS += $(SINGL_LDFLAGS)
endif
endif
endif
# wide (typically 64-bit) mode
ifeq ($(findstring wide,$(BUILDMODE)),wide)
CXXFLAGS += $(CXXFLAGS.wide)
LDFLAGS += $(LDFLAGS.wide)
LDSOFLAGS += $(LDSOFLAGS.wide)
ARFLAGS += $(ARFLAGS.wide)
endif
ifeq ($(findstring narrow,$(BUILDMODE)),narrow)
CXXFLAGS += $(CXXFLAGS.narrow)
LDFLAGS += $(LDFLAGS.narrow)
LDSOFLAGS += $(LDSOFLAGS.narrow)
ARFLAGS += $(ARFLAGS.narrow)
endif
# platform is determined as {OS-name}-{OS-version}-{hardware}
PLATFORM := $(shell uname -srm | sed "s/[ \/]/-/g")
ifeq ($(OSNAME),SunOS)
# Sun recommends to use uname -p rather than the POSIX uname -m
PLATFORM := $(shell uname -srp | sed "s/[ \/]/-/g")
else
ifeq ($(OSNAME),AIX)
PLATFORM := $(shell uname -srv | awk '{ print $$1 "-" $$3 "." $$2 }')
else
ifeq ($(findstring CYGWIN,$(OSNAME)),CYGWIN)
PLATFORM := $(shell uname -sm | sed "s/[ \/]/-/g")
endif
endif
endif
# harmonize all the different Intel IA32 chips
PLATFORM := $(subst i486,i86,$(PLATFORM))
PLATFORM := $(subst i586,i86,$(PLATFORM))
PLATFORM := $(subst i686,i86,$(PLATFORM))
PLATFORM := $(shell echo $(PLATFORM) | tr "[:upper:]" "[:lower:]")
CONFIG_H := $(CXX)-$(CCVER)-$(BUILDTYPE)
# name of the library w/o the prefix and suffix
# suitable for use by the linker after the -l option
LIBBASE = std$(BUILDTYPE)
# full library filename (including suffix)
LIBNAME = lib$(LIBBASE)$(LIBSUFFIX)
ifeq ($(DEPENDDIR),)
DEPENDDIR=.depend
endif
# obtain library version number from the macro _RWSTD_VER
# #defined in the rw/_config.h library header
LIBVER := $(shell awk '/^.define _RWSTD_VER / { major = substr ($$3, 3, 2); minor = substr ($$3, 5, 2); micro = substr ($$3, 7, 2); print (major + 0) "." (minor + 0) "." (micro + 0) }' $(TOPDIR)/include/rw/_config.h)
########################################################################
# TARGETS
########################################################################
all: libstd
# make-builddir function: creates the build directory tree
# defined as a single shell command to avoid executing each command
# in a separate subshell
define make-builddir
[ "$(buildpath)" = "" -o -x $(buildpath) ] && exit 0; \
echo "creating BUILDDIR=$(buildpath)"; \
mkdir -p $(MAKEDIRS); \
[ $$? -ne 0 ] && { \
echo "unable to create build directory"; \
exit 1; \
}; \
ln -sf $(TOPDIR)/GNUmakefile $(buildpath); \
ln -sf $(ETCDIR)/GNUmakefile.cfg $(buildpath)/include/GNUmakefile; \
ln -sf $(ETCDIR)/GNUmakefile.lib $(LIBDIR)/GNUmakefile; \
ln -sf $(ETCDIR)/GNUmakefile.rwt $(buildpath)/rwtest/GNUmakefile; \
ln -sf $(ETCDIR)/GNUmakefile.exm $(EXMDIR)/GNUmakefile; \
ln -sf $(ETCDIR)/GNUmakefile.tst $(TSTDIR)/GNUmakefile; \
ln -sf $(ETCDIR)/GNUmakefile.ph $(PHTSTDIR)/GNUmakefile; \
ln -sf $(ETCDIR)/GNUmakefile.bin $(BINDIR)/GNUmakefile; \
ln -sf $(ETCDIR)/makefile.common $(buildpath); \
ln -sf $(ETCDIR)/makefile.rules $(buildpath); \
ln -sf $(ETCDIR)/configure.sh $(buildpath)/include/configure; \
ln -sf $(BINDIR)/exec $(buildpath)/run; \
ln -sf $(BINDIR)/exec $(BINDIR)/run; \
ln -sf $(ETCDIR)/run_locale_utils.sh $(BINDIR)/run_utils; \
ln -sf $(BINDIR)/exec $(TSTDIR)/run; \
ln -sf $(BINDIR)/exec $(PHTSTDIR)/run; \
ln -sf $(BINDIR)/exec $(EXMDIR)/run
endef # make-builddir
# create $(MAKEFILE_IN)
#
# NOTE: adding a new variable here that is used by the configuration
# machinery requires replacing $BUILDDIR/$(MAKEFILE_IN) as well
# as $BUILDDIR/include/vars.sh generated from this file and
# used by the libc_decl.sh script
$(MAKEFILE_IN): $(configpath)
@( $(make-builddir); \
echo "generating $(MAKEFILE_IN) from $(configpath)" \
&& echo "TOPDIR = $(TOPDIR)" >> $(MAKEFILE_IN) \
&& echo "BUILDDIR = $(buildpath)" >> $(MAKEFILE_IN) \
&& echo "CONFIG = $$""(TOPDIR)/etc/config/$(CONFIG)" \
>> $(MAKEFILE_IN) \
&& echo "CONFIG_H = $(CONFIG_H)" >> $(MAKEFILE_IN) \
&& echo "BUILDTYPE = $(BUILDTYPE)" >> $(MAKEFILE_IN) \
&& echo "BUILDMODE = $(BUILDMODE)" >> $(MAKEFILE_IN) \
&& echo "CXX = $(CXX)" >> $(MAKEFILE_IN) \
&& echo "CXXFLAGS = $(CXXFLAGS)" >> $(MAKEFILE_IN) \
&& echo "PRELINKFLAGS = $(PRELINKFLAGS)" >> $(MAKEFILE_IN) \
&& echo "PICFLAGS = $(PICFLAGS)" >> $(MAKEFILE_IN) \
&& echo "CPPFLAGS = $(CPPFLAGS)" >> $(MAKEFILE_IN) \
&& echo "WARNFLAGS = $(WARNFLAGS)" >> $(MAKEFILE_IN) \
&& echo "DEPENDFLAGS = $(DEPENDFLAGS)" >> $(MAKEFILE_IN) \
&& echo "DEPENDFLAGS.cpp = $(DEPENDFLAGS.cpp)" >> $(MAKEFILE_IN) \
&& echo "DEPENDFLAGS$(AS_EXT) = $(value DEPENDFLAGS$(AS_EXT))" \
>> $(MAKEFILE_IN) \
&& echo "AS_EXT = $(AS_EXT)" >> $(MAKEFILE_IN) \
&& echo "LD = $(LD)" >> $(MAKEFILE_IN) \
&& echo "LDFLAGS = $(LDFLAGS)" >> $(MAKEFILE_IN) \
&& echo "LDLIBS = $(LDLIBS)" >> $(MAKEFILE_IN) \
&& echo "LDSOFLAGS = $(LDSOFLAGS)" >> $(MAKEFILE_IN) \
&& echo "LIBM = $(LIBM)" >> $(MAKEFILE_IN) \
&& echo "MAPFLAGS = $(MAPFLAGS)" >> $(MAKEFILE_IN) \
&& echo "RPATH = $(RPATH)" >> $(MAKEFILE_IN) \
&& [ "$(MAPFILE)" = "" ] \
|| echo "MAPFILE = $$""(TOPDIR)/$(MAPFILE)" >> $(MAKEFILE_IN) \
&& echo "RUNFLAGS = -t 300" >> $(MAKEFILE_IN) \
&& echo "DEPENDDIR = $(DEPENDDIR)" >> $(MAKEFILE_IN) \
&& echo "PHDIR = $(PHDIR)" >> $(MAKEFILE_IN) \
&& echo "PHWARNFLAGS = $(PHWARNFLAGS)" >> $(MAKEFILE_IN) \
&& echo "LIBSUFFIX = $(LIBSUFFIX)" >> $(MAKEFILE_IN) \
&& echo "LIBBASE = std$$""(BUILDTYPE)" >> $(MAKEFILE_IN) \
&& echo "LIBVER = $(LIBVER)" >> $(MAKEFILE_IN) \
&& echo "LIBNAME = lib$$""(LIBBASE)$$""(LIBSUFFIX)" \
>> $(MAKEFILE_IN) \
&& echo "AR = $(AR)" >> $(MAKEFILE_IN) \
&& echo "ARFLAGS = $(ARFLAGS)" >> $(MAKEFILE_IN) \
&& echo "CCVER = $(CCVER)" >> $(MAKEFILE_IN) \
&& echo "SHARED = $(SHARED)" >> $(MAKEFILE_IN) \
&& echo "CATFILE = $(CATFILE)" >> $(MAKEFILE_IN) \
&& echo "OMIT_EXM_SRCS = $(OMIT_EXM_SRCS)" >> $(MAKEFILE_IN) \
&& echo "OMIT_TST_SRCS = $(OMIT_TST_SRCS)" >> $(MAKEFILE_IN) \
&& echo "BUILDTAG = $(BUILDTAG)" >> $(MAKEFILE_IN) \
&& echo "PLATFORM = $(PLATFORM)" >> $(MAKEFILE_IN) \
&& echo "DEFAULT_SHROBJ = $(DEFAULT_SHROBJ)" >> $(MAKEFILE_IN) \
&& echo "WITH_CADVISE = $(WITH_CADVISE)" >> $(MAKEFILE_IN) \
&& echo "CADVISEFLAGS = $(CADVISEFLAGS)" >> $(MAKEFILE_IN) \
&& echo "WITH_PURIFY = $(WITH_PURIFY)" >> $(MAKEFILE_IN) \
&& echo "PURIFYFLAGS = $(PURIFYFLAGS)" >> $(MAKEFILE_IN) \
&& echo "CXX_REPOSITORY = $(CXX_REPOSITORY)" >> $(MAKEFILE_IN));
# creates the build directory tree and generates makefile.in
builddir: $(MAKEFILE_IN)
@echo "build directory created: BUILDDIR=$(BUILDDIR)"
# prevent trying to make makefile.in when $(BUILDDIR) is
# not defined and -include $(BUILDDIR)/makefile.in fails
makefile.in:
.DEFAULT:
@$(MAKE) -C$(buildpath) $(MAKEFLAGS) $(MAKECMDGOALS) \
BUILDDIR=$(buildpath)
else # ifneq ($(in_topdir),1) ##############################################
######################################################################
# THIS BLOCK IS EVALUATED ONLY WHEN MAKE IS INVOKED IN BUILDDIR
######################################################################
all: config lib examples util rwtest tests $(PHDTSTDIR)
# configure (create config.h)
config:
@$(MAKE) -C$(BUILDDIR)/include
# build utilities
util:
@$(MAKE) -C$(BINDIR)
# build library
lib:
@$(MAKE) -C$(LIBDIR)
# build the test library
rwtest:
@$(MAKE) -C$(BUILDDIR)/rwtest
# build tests, ignore failures
tests:
-$(MAKE) -C$(TSTDIR)
# build the Plum Hall test suite, ignore failures
phtst:
-@$(MAKE) -C$(PHTSTDIR)
# make examples, ignore failures
examples:
-@$(MAKE) -C$(EXMDIR)
# install library, headers, and utilities
install:
mkdir -p $(PREFIX)
$(MAKE) -Clib $@
$(MAKE) -Cbin $@
mkdir -p $(PREFIX)/include
cp include/config.h $(PREFIX)/include
cp -Rf $(TOPDIR)/include $(PREFIX)
# try each submakefile
.DEFAULT:
-@$(MAKE) -C$(BUILDDIR)/include $@
-@$(MAKE) -C$(LIBDIR) $@
-@$(MAKE) -C$(BUILDDIR)/rwtest $@
-@$(MAKE) -C$(BUILDDIR)/bin $@
-@$(MAKE) -C$(TSTDIR) $@
-@$(MAKE) -C$(PHTSTDIR) $@
-@$(MAKE) -C$(EXMDIR) $@
endif # ($(CURDIR),$(TOPDIR))
.PHONY: all bin builddir examples install lib phtst post rwtest tests util