blob: 0c5ca76c7ee941cc92cd8ab72d8c63f667321db2 [file] [log] [blame]
#!/usr/bin/perl -w -T
# <@LICENSE>
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to you under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at:
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# </@LICENSE>
use strict;
use warnings;
# use bytes;
use Errno qw(EBADF);
use Getopt::Long;
use Pod::Usage;
use File::Spec;
use POSIX qw(locale_h setsid sigprocmask _exit);
POSIX::setlocale(LC_TIME,'C');
our ( $spamtest, %opt, $isspam, $forget, $messagecount, $learnedcount, $messagelimit, $progress,
$total_messages, $init_results, $start_time, $synconly, $learnprob, @targets, $bayes_override_path );
my $PREFIX = '@@PREFIX@@'; # substituted at 'make' time
my $DEF_RULES_DIR = '@@DEF_RULES_DIR@@'; # substituted at 'make' time
my $LOCAL_RULES_DIR = '@@LOCAL_RULES_DIR@@'; # substituted at 'make' time
use lib '@@INSTALLSITELIB@@'; # substituted at 'make' time
BEGIN { # see comments in "spamassassin.raw" for doco
my @bin = File::Spec->splitpath($0);
my $bin = ($bin[0] ? File::Spec->catpath(@bin[0..1], '') : $bin[1])
|| File::Spec->curdir;
if (-e $bin.'/lib/Mail/SpamAssassin.pm'
|| !-e '@@INSTALLSITELIB@@/Mail/SpamAssassin.pm' )
{
my $searchrelative;
$searchrelative = 1; # disabled during "make install": REMOVEFORINST
if ($searchrelative && $bin eq '../' && -e '../blib/lib/Mail/SpamAssassin.pm')
{
unshift ( @INC, '../blib/lib' );
} else {
foreach ( qw(lib ../lib/site_perl
../lib/spamassassin ../share/spamassassin/lib))
{
my $dir = File::Spec->catdir( $bin, split ( '/', $_ ) );
if ( -f File::Spec->catfile( $dir, "Mail", "SpamAssassin.pm" ) )
{ unshift ( @INC, $dir ); last; }
}
}
}
}
use Mail::SpamAssassin;
use Mail::SpamAssassin::ArchiveIterator;
use Mail::SpamAssassin::Message;
use Mail::SpamAssassin::PerMsgLearner;
use Mail::SpamAssassin::Util::Progress;
use Mail::SpamAssassin::Logger;
###########################################################################
$SIG{PIPE} = 'IGNORE';
# used to be CmdLearn::cmd_run() ...
%opt = (
'force-expire' => 0,
'use-ignores' => 0,
'nosync' => 0,
'quiet' => 0,
'cf' => []
);
Getopt::Long::Configure(
qw(bundling no_getopt_compat
permute no_auto_abbrev no_ignore_case)
);
GetOptions(
'forget' => \$forget,
'ham|nonspam' => sub { $isspam = 0; },
'spam' => sub { $isspam = 1; },
'sync' => \$synconly,
'rebuild' => sub { $synconly = 1; warn "The --rebuild option has been deprecated. Please use --sync instead.\n" },
'q|quiet' => \$opt{'quiet'},
'username|u=s' => \$opt{'username'},
'configpath|config-file|config-dir|c|C=s' => \$opt{'configpath'},
'prefspath|prefs-file|p=s' => \$opt{'prefspath'},
'siteconfigpath=s' => \$opt{'siteconfigpath'},
'cf=s' => \@{$opt{'cf'}},
'folders|f=s' => \$opt{'folders'},
'force-expire|expire' => \$opt{'force-expire'},
'local|L' => \$opt{'local'},
'no-sync|nosync' => \$opt{'nosync'},
'showdots' => \$opt{'showdots'},
'progress' => \$opt{'progress'},
'use-ignores' => \$opt{'use-ignores'},
'no-rebuild|norebuild' => sub { $opt{'nosync'} = 1; warn "The --no-rebuild option has been deprecated. Please use --no-sync instead.\n" },
'learnprob=f' => \$opt{'learnprob'},
'randseed=i' => \$opt{'randseed'},
'stopafter=i' => \$opt{'stopafter'},
'max-size=i' => \$opt{'max-size'},
'debug|debug-level|D:s' => \$opt{'debug'},
'help|h|?' => \$opt{'help'},
'version|V' => \$opt{'version'},
'dump:s' => \$opt{'dump'},
'import' => \$opt{'import'},
'backup' => \$opt{'backup'},
'clear' => \$opt{'clear'},
'restore=s' => \$opt{'restore'},
'dir' => sub { $opt{'old_format'} = 'dir'; },
'file' => sub { $opt{'old_format'} = 'file'; },
'mbox' => sub { $opt{'format'} = 'mbox'; },
'mbx' => sub { $opt{'format'} = 'mbx'; },
'single' => sub { $opt{'old_format'} = 'single'; },
'db|dbpath=s' => \$bayes_override_path,
're|regexp=s' => \$opt{'regexp'},
'<>' => \&target,
)
or usage( 0, "Unknown option!" );
if ( defined $opt{'help'} ) {
usage( 0, "For more information read the manual page" );
}
if ( defined $opt{'version'} ) {
print "SpamAssassin version " . Mail::SpamAssassin::Version() . "\n";
exit 0;
}
# set debug areas, if any specified (only useful for command-line tools)
if (defined $opt{'debug'}) {
$opt{'debug'} ||= 'all';
}
if ( $opt{'force-expire'} ) {
$synconly = 1;
}
if ($opt{'showdots'} && $opt{'progress'}) {
print "--showdots and --progress may not be used together, please select just one\n";
exit 0;
}
if ( !defined $isspam
&& !defined $synconly
&& !defined $forget
&& !defined $opt{'dump'}
&& !defined $opt{'import'}
&& !defined $opt{'clear'}
&& !defined $opt{'backup'}
&& !defined $opt{'restore'}
&& !defined $opt{'folders'} )
{
usage( 0,
"Please select either --spam, --ham, --folders, --forget, --sync, --import,\n--dump, --clear, --backup or --restore"
);
}
# We need to make sure the journal syncs pre-forget...
if ( defined $forget && $opt{'nosync'} ) {
$opt{'nosync'} = 0;
warn "sa-learn warning: --forget requires read/write access to the database, and is incompatible with --no-sync\n";
}
if ( defined $opt{'old_format'} ) {
#Format specified in the 2.5x form of --dir, --file, --mbox, --mbx or --single.
#Convert it to the new behavior:
if ( $opt{'old_format'} eq 'single' ) {
push ( @ARGV, '-' );
}
}
my $post_config = '';
# kluge to support old check_bayes_db operation
# bug 3799: init() will go r/o with the configured DB, and then dbpath needs
# to override. Just access the dbpath version via post_config_text.
if ( defined $bayes_override_path ) {
# Add a default prefix if the path is a directory
if ( -d $bayes_override_path ) {
$bayes_override_path = File::Spec->catfile( $bayes_override_path, 'bayes' );
}
$post_config .= "bayes_path $bayes_override_path\n";
}
# These options require bayes_scanner, which requires "use_bayes 1", but
# that's not necessary for these commands.
if (defined $opt{'dump'} || defined $opt{'import'} || defined $opt{'clear'} ||
defined $opt{'backup'} || defined $opt{'restore'}) {
$post_config .= "use_bayes 1\n";
}
$post_config .= join("\n", @{$opt{'cf'}})."\n";
# create the tester factory
$spamtest = Mail::SpamAssassin->new(
{
rules_filename => $opt{'configpath'},
site_rules_filename => $opt{'siteconfigpath'},
userprefs_filename => $opt{'prefspath'},
username => $opt{'username'},
debug => $opt{'debug'},
local_tests_only => $opt{'local'},
dont_copy_prefs => 1,
PREFIX => $PREFIX,
DEF_RULES_DIR => $DEF_RULES_DIR,
LOCAL_RULES_DIR => $LOCAL_RULES_DIR,
post_config_text => $post_config,
}
);
$spamtest->init(1);
dbg("sa-learn: spamtest initialized");
# Bug 6228 hack: bridge the transition gap of moving Bayes.pm into a plugin;
# To be resolved more cleanly!!!
if ($spamtest->{bayes_scanner}) {
foreach my $plugin ( @{ $spamtest->{plugins}->{plugins} } ) {
if ($plugin->isa('Mail::SpamAssassin::Plugin::Bayes')) {
# copy plugin's "store" object ref one level up!
$spamtest->{bayes_scanner}->{store} = $plugin->{store};
}
}
}
if (Mail::SpamAssassin::Util::am_running_on_windows()) {
binmode(STDIN) or die "cannot set binmode on STDIN: $!"; # bug 4363
binmode(STDOUT) or die "cannot set binmode on STDOUT: $!";
}
if ( defined $opt{'dump'} ) {
my ( $magic, $toks );
if ( $opt{'dump'} eq 'all' || $opt{'dump'} eq '' ) { # show us all tokens!
( $magic, $toks ) = ( 1, 1 );
}
elsif ( $opt{'dump'} eq 'magic' ) { # show us magic tokens only
( $magic, $toks ) = ( 1, 0 );
}
elsif ( $opt{'dump'} eq 'data' ) { # show us data tokens only
( $magic, $toks ) = ( 0, 1 );
}
else { # unknown option
warn "Unknown dump option '" . $opt{'dump'} . "'\n";
$spamtest->finish_learner();
exit 1;
}
if (!$spamtest->dump_bayes_db( $magic, $toks, $opt{'regexp'}) ) {
$spamtest->finish_learner();
die "ERROR: Bayes dump returned an error, please re-run with -D for more information\n";
}
$spamtest->finish_learner();
# make sure we notice any write errors while flushing output buffer
close STDOUT or die "error closing STDOUT: $!";
close STDIN or die "error closing STDIN: $!";
exit 0;
}
if ( defined $opt{'import'} ) {
my $ret = $spamtest->{bayes_scanner}->{store}->perform_upgrade();
$spamtest->finish_learner();
# make sure we notice any write errors while flushing output buffer
close STDOUT or die "error closing STDOUT: $!";
close STDIN or die "error closing STDIN: $!";
exit( !$ret );
}
if (defined $opt{'clear'}) {
unless ($spamtest->{bayes_scanner}->{store}->clear_database()) {
$spamtest->finish_learner();
die "ERROR: Bayes clear returned an error, please re-run with -D for more information\n";
}
$spamtest->finish_learner();
# make sure we notice any write errors while flushing output buffer
close STDOUT or die "error closing STDOUT: $!";
close STDIN or die "error closing STDIN: $!";
exit 0;
}
if (defined $opt{'backup'}) {
unless ($spamtest->{bayes_scanner}->{store}->backup_database()) {
$spamtest->finish_learner();
die "ERROR: Bayes backup returned an error, please re-run with -D for more information\n";
}
$spamtest->finish_learner();
# make sure we notice any write errors while flushing output buffer
close STDOUT or die "error closing STDOUT: $!";
close STDIN or die "error closing STDIN: $!";
exit 0;
}
if (defined $opt{'restore'}) {
my $filename = $opt{'restore'};
unless ($filename) {
$spamtest->finish_learner();
die "ERROR: You must specify a filename to restore.\n";
}
unless ($spamtest->{bayes_scanner}->{store}->restore_database($filename, $opt{'showdots'})) {
$spamtest->finish_learner();
die "ERROR: Bayes restore returned an error, please re-run with -D for more information\n";
}
$spamtest->finish_learner();
# make sure we notice any write errors while flushing output buffer
close STDOUT or die "error closing STDOUT: $!";
close STDIN or die "error closing STDIN: $!";
exit 0;
}
if ( !$spamtest->{conf}->{use_bayes} ) {
warn "ERROR: configuration specifies 'use_bayes 0', sa-learn disabled\n";
exit 1;
}
$spamtest->init_learner(
{
force_expire => $opt{'force-expire'},
learn_to_journal => $opt{'nosync'},
wait_for_lock => 1,
caller_will_untie => 1
}
);
$spamtest->{bayes_scanner}{use_ignores} = $opt{'use-ignores'};
if ($synconly) {
$spamtest->rebuild_learner_caches(
{
verbose => !$opt{'quiet'},
showdots => $opt{'showdots'}
}
);
$spamtest->finish_learner();
# make sure we notice any write errors while flushing output buffer
close STDOUT or die "error closing STDOUT: $!";
close STDIN or die "error closing STDIN: $!";
exit 0;
}
$messagelimit = $opt{'stopafter'};
$learnprob = $opt{'learnprob'};
if ( defined $opt{'randseed'} ) {
srand( $opt{'randseed'} );
}
# sync the journal first if we're going to go r/w so we make sure to
# learn everything before doing anything else.
#
if ( !$opt{nosync} ) {
$spamtest->rebuild_learner_caches();
}
# what is the result of the run? will end up being the exit code.
my $exit_status = 0;
# run this lot in an eval block, so we can catch die's and clear
# up the dbs.
eval {
$SIG{HUP} = \&killed;
$SIG{INT} = \&killed;
$SIG{TERM} = \&killed;
if ( $opt{folders} ) {
open( F, $opt{folders} ) or die "cannot open $opt{folders}: $!";
for ($!=0; <F>; $!=0) {
chomp;
next if /^\s*$/;
if (/^(ham|spam):(\w*):(.*)/) {
my $class = $1;
my $format = $2 || "detect";
my $target = $3;
push ( @targets, "$class:$format:$target" );
}
else {
target($_);
}
}
defined $_ || $!==0 or
$!==EBADF ? dbg("error reading from $opt{folders}: $!")
: die "error reading from $opt{folders}: $!";
close(F) or die "error closing $opt{folders}: $!";
}
###########################################################################
# Deal with the target listing, and STDIN -> tempfile
my $tempfile; # will be defined if stdin -> tempfile
push(@targets, @ARGV);
@targets = ('-') unless @targets || $opt{folders};
for(my $elem = 0; $elem <= $#targets; $elem++) {
# ArchiveIterator doesn't really like STDIN, so if "-" is specified
# as a target, make it a temp file instead.
if ( $targets[$elem] =~ /(?:^|:)-$/ ) {
if (defined $tempfile) {
# uh-oh, stdin specified multiple times?
warn "skipping extra stdin target (".$targets[$elem].")\n";
splice @targets, $elem, 1;
$elem--; # go back to this element again
next;
}
else {
my $handle;
( $tempfile, $handle ) = Mail::SpamAssassin::Util::secure_tmpfile();
binmode $handle or die "cannot set binmode on file $tempfile: $!";
# avoid slurping the whole file into memory, copy chunk by chunk
my($inbuf,$nread);
while ( $nread=sysread(STDIN,$inbuf,16384) )
{ print {$handle} $inbuf or die "error writing to $tempfile: $!" }
defined $nread or die "error reading from STDIN: $!";
close $handle or die "error closing $tempfile: $!";
# re-aim the targets at the tempfile instead of STDIN
$targets[$elem] =~ s/-$/$tempfile/;
}
}
# make sure the target list is in the normal AI format
if ($targets[$elem] !~ /^[^:]*:[a-z]+:/) {
my $item = splice @targets, $elem, 1;
target($item); # add back to the list
$elem--; # go back to this element again
next;
}
}
###########################################################################
my $iter = Mail::SpamAssassin::ArchiveIterator->new(
{
# skip messages larger than max-size bytes,
# 0 for no limit, undef defaults to 500 KB
'opt_max_size' => $opt{'max-size'},
'opt_want_date' => 0,
'opt_from_regex' => $spamtest->{conf}->{mbox_format_from_regex},
}
);
$iter->set_functions(\&wanted, \&result);
$messagecount = 0;
$learnedcount = 0;
$init_results = 0;
$start_time = time;
# if exit_status isn't already set to non-zero, set it to the reverse of the
# run result (0 is bad, 1+ is good -- the opposite of exit status codes)
my $run_ok = eval { $exit_status ||= ! $iter->run(@targets); 1 };
print STDERR "\n" if ($opt{showdots});
$progress->final() if ($opt{progress} && $progress);
my $phrase = defined $forget ? "Forgot" : "Learned";
print "$phrase tokens from $learnedcount message(s) ($messagecount message(s) examined)\n"
if !$opt{'quiet'};
# If we needed to make a tempfile, go delete it.
if (defined $tempfile) {
unlink $tempfile or die "cannot unlink temporary file $tempfile: $!";
undef $tempfile;
}
if (!$run_ok && $@ !~ /HITLIMIT/) { die $@ }
1;
} or do {
my $eval_stat = $@ ne '' ? $@ : "errno=$!"; chomp $eval_stat;
$spamtest->finish_learner();
die $eval_stat;
};
$spamtest->finish_learner();
# make sure we notice any write errors while flushing output buffer
close STDOUT or die "error closing STDOUT: $!";
close STDIN or die "error closing STDIN: $!";
exit $exit_status;
###########################################################################
sub killed {
$spamtest->finish_learner();
die "interrupted";
}
sub target {
my ($target) = @_;
if (!defined $isspam && !$forget)
{
usage( 0,
"Please select either --spam or --ham or --forget before the first target"
);
}
my $class = ( $isspam ? "spam" : "ham" );
my $format = ( defined( $opt{'format'} ) ? $opt{'format'} : "detect" );
push ( @targets, "$class:$format:$target" );
}
###########################################################################
sub init_results {
$init_results = 1;
return unless $opt{'progress'};
$total_messages = $Mail::SpamAssassin::ArchiveIterator::MESSAGES;
$progress = Mail::SpamAssassin::Util::Progress->new({total => $total_messages,});
}
###########################################################################
sub result {
my ($class, $result, $time) = @_;
# don't open results files until we get here to avoid overwriting files
&init_results if !$init_results;
$progress->update($messagecount) if ($opt{progress} && $progress);
}
###########################################################################
sub wanted {
my ( $class, $id, $time, $dataref ) = @_;
my $spam = $class eq "s" ? 1 : 0;
if ( defined($learnprob) ) {
if ( int( rand( 1 / $learnprob ) ) != 0 ) {
print STDERR '_' if ( $opt{showdots} );
return 1;
}
}
if ( defined($messagelimit) && $learnedcount > $messagelimit ) {
$progress->final() if ($opt{progress} && $progress);
die 'HITLIMIT';
}
$messagecount++;
my $ma = $spamtest->parse($dataref);
if ( $ma->get_header("X-Spam-Checker-Version") ) {
my $new_ma = $spamtest->parse($spamtest->remove_spamassassin_markup($ma), 1);
$ma->finish();
$ma = $new_ma;
}
my $status = $spamtest->learn( $ma, undef, $spam, $forget );
my $learned = $status->did_learn();
if ( !defined $learned ) { # undef=learning unavailable
die "ERROR: the Bayes learn function returned an error, please re-run with -D for more information\n";
}
elsif ( $learned == 1 ) { # 1=message was learned. 0=message wasn't learned
$learnedcount++;
}
# Do cleanup ...
$status->finish();
undef $status;
$ma->finish();
undef $ma;
print STDERR '.' if ( $opt{showdots} );
return 1;
}
###########################################################################
sub usage {
my ( $verbose, $message ) = @_;
my $ver = Mail::SpamAssassin::Version();
print "SpamAssassin version $ver\n";
pod2usage( -verbose => $verbose, -message => $message, -exitval => 64 );
}
# ---------------------------------------------------------------------------
=head1 NAME
sa-learn - train SpamAssassin's Bayesian classifier
=head1 SYNOPSIS
B<sa-learn> [options] [file]...
B<sa-learn> [options] --dump [ all | data | magic ]
Options:
--ham Learn the following messages as ham (non-spam)
--spam Learn the following messages as spam
--forget Forget the following messages
--use-ignores Use bayes_ignore_from and bayes_ignore_to
--sync Synchronize the database and the journal if needed
--force-expire Force a database sync and expiry run
--dbpath <path> Allows commandline override (in bayes_path form)
for where to read the Bayes DB from
--dump [all|data|magic] Display the contents of the Bayes database
Takes optional argument for what to display
--regexp <re> For dump only, specifies which tokens to
dump based on a regular expression.
-f file, --folders=file Read list of files/directories from file
--dir Ignored; historical compatibility
--file Ignored; historical compatibility
--mbox Input sources are in mbox format
--mbx Input sources are in mbx format
--max-size <b> Skip messages larger than b bytes;
defaults to 500 KB, 0 implies no limit
--showdots Show progress using dots
--progress Show progress using progress bar
--no-sync Skip synchronizing the database and journal
after learning
-L, --local Operate locally, no network accesses. Use
of this is recommended, see documentation.
--import Migrate data from older version/non DB_File
based databases
--clear Wipe out existing database
--backup Backup, to STDOUT, existing database
--restore <filename> Restore a database from filename
-u username, --username=username
Override username taken from the runtime
environment, used with SQL
-C path, --configpath=path, --config-file=path
Path to standard configuration dir
-p prefs, --prefspath=file, --prefs-file=file
Set user preferences file
--siteconfigpath=path Path for site configs
(default: @@PREFIX@@/etc/mail/spamassassin)
--cf='config line' Additional line of configuration
-D, --debug [area,...] Print debugging messages
-V, --version Print version
-h, --help Print usage message
=head1 DESCRIPTION
Given a typical selection of your incoming mail classified as spam or ham
(non-spam), this tool will feed each mail to SpamAssassin, allowing it
to 'learn' what signs are likely to mean spam, and which are likely to
mean ham.
Simply run this command once for each of your mail folders, and it will
''learn'' from the mail therein.
Note that csh-style I<globbing> in the mail folder names is supported;
in other words, listing a folder name as C<*> will scan every folder
that matches. See C<Mail::SpamAssassin::ArchiveIterator> for more details.
If you are using mail boxes in format other than maildir you should use
the B<--mbox> or B<--mbx> parameters.
Files compressed with gzip/bzip2/xz/lz4/lzip/lzo are uncompressed
automatically. See C<Mail::SpamAssassin::ArchiveIterator> for more details.
SpamAssassin remembers which mail messages it has learnt already, and will not
re-learn those messages again, unless you use the B<--forget> option. Messages
learnt as spam will have SpamAssassin markup removed, on the fly.
If you make a mistake and scan a mail as ham when it is spam, or vice
versa, simply rerun this command with the correct classification, and the
mistake will be corrected. SpamAssassin will automatically 'forget' the
previous indications.
Users of C<spamd> who wish to perform training remotely, over a network,
should investigate the C<spamc -L> switch.
=head1 OPTIONS
=over 4
=item B<--ham>
Learn the input message(s) in the files following the option as ham.
If you have previously learnt any of the messages as spam, SpamAssassin will
forget them first, then re-learn them as ham. Alternatively, if you have
previously learnt them as ham, it'll skip them this time around.
If the messages have already been filtered through SpamAssassin, the learner
will ignore any modifications SpamAssassin may have made.
=item B<--spam>
Learn the input message(s) in the files following the option as spam.
If you have previously learnt any of the messages as ham, SpamAssassin will
forget them first, then re-learn them as spam. Alternatively, if you have
previously learnt them as spam, it'll skip them this time around.
If the messages have already been filtered through SpamAssassin, the learner
will ignore any modifications SpamAssassin may havemmade.
=item B<--folders>=I<filename>, B<-f> I<filename>
sa-learn will read in the list of folders from the specified file, one folder
per line in the file. If the folder is prefixed with C<ham:type:> or C<spam:type:>,
sa-learn will learn that folder appropriately, otherwise the folders will be
assumed to be of the type specified by B<--ham> or B<--spam>.
C<type> above is optional, but is the same as the standard for
ArchiveIterator: mbox, mbx, dir, file, or detect (the default if not
specified).
=item B<--mbox>
sa-learn will read in the file(s) containing the emails to be learned,
and will process them in mbox format (one or more emails per file).
=item B<--mbx>
sa-learn will read in the file(s) containing the emails to be learned,
and will process them in mbx format (one or more emails per file).
=item B<--use-ignores>
Don't learn the message if a from address matches configuration file
item C<bayes_ignore_from> or a to address matches C<bayes_ignore_to>.
The option might be used when learning from a large file of messages
from which the hammy spam messages or spammy ham messages have not
been removed.
=item B<--sync>
Synchronize the journal and databases. Upon successfully syncing the
database with the entries in the journal, the journal file is removed.
=item B<--force-expire>
Forces an expiry attempt, regardless of whether it may be necessary
or not. Note: This doesn't mean any tokens will actually expire.
Please see the EXPIRATION section below.
Note: C<--force-expire> also causes the journal data to be synchronized
into the Bayes databases.
=item B<--forget>
Forget the input message(s) in the files following the option as previously
learnt.
=item B<--dbpath>
Allows a commandline override of the I<bayes_path> configuration option.
=item B<--dump> I<option>
Display the contents of the Bayes database. Without an option or with
the I<all> option, all magic tokens and data tokens will be displayed.
I<magic> will only display magic tokens, and I<data> will only display
the data tokens.
Can also use the B<--regexp> I<RE> option to specify which tokens to
display based on a regular expression.
=item B<--clear>
Clear an existing Bayes database by removing all traces of the database.
WARNING: This is destructive and should be used with care.
=item B<--backup>
Performs a dump of the Bayes database in machine/human readable format.
The dump will include token and seen data. It is suitable for input back
into the --restore command.
=item B<--restore>=I<filename>
Performs a restore of the Bayes database defined by I<filename>.
WARNING: This is a destructive operation, previous Bayes data will be wiped out.
=item B<-h>, B<--help>
Print help message and exit.
=item B<-u> I<username>, B<--username>=I<username>
If specified this username will override the username taken from the runtime
environment. You can use this option to specify users in a virtual user
configuration when using SQL as the Bayes backend.
NOTE: This option will not change to the given I<username>, it will only attempt
to act on behalf of that user. Because of this you will need to have proper
permissions to be able to change files owned by I<username>. In the case of SQL
this generally is not a problem.
=item B<-C> I<path>, B<--configpath>=I<path>, B<--config-file>=I<path>
Use the specified path for locating the distributed configuration files.
Ignore the default directories (usually C</usr/share/spamassassin> or similar).
=item B<--siteconfigpath>=I<path>
Use the specified path for locating site-specific configuration files. Ignore
the default directories (usually C</etc/mail/spamassassin> or similar).
=item B<--cf='config line'>
Add additional lines of configuration directly from the command-line, parsed
after the configuration files are read. Multiple B<--cf> arguments can be
used, and each will be considered a separate line of configuration.
=item B<-p> I<prefs>, B<--prefspath>=I<prefs>, B<--prefs-file>=I<prefs>
Read user score preferences from I<prefs> (usually C<$HOME/.spamassassin/user_prefs>).
=item B<--progress>
Prints a progress bar (to STDERR) showing the current progress. In the case
where no valid terminal is found this option will behave very much like the
--showdots option.
=item B<-D> [I<area,...>], B<--debug> [I<area,...>]
Produce debugging output. If no areas are listed, all debugging information is
printed. Diagnostic output can also be enabled for each area individually;
I<area> is the area of the code to instrument. For example, to produce
diagnostic output on bayes, learn, and dns, use:
spamassassin -D bayes,learn,dns
Use an empty string (-D '') to indicate no areas when the next item on the
command line is a path, to prevent the path from being parsed as an area.
For more information about which areas (also known as channels) are available,
please see the documentation at:
C<https://wiki.apache.org/spamassassin/DebugChannels>
Higher priority informational messages that are suitable for logging in normal
circumstances are available with an area of "info".
=item B<--no-sync>
Skip the slow synchronization step which normally takes place after
changing database entries. If you plan to learn from many folders in
a batch, or to learn many individual messages one-by-one, it is faster
to use this switch and run C<sa-learn --sync> once all the folders have
been scanned.
Clarification: The state of I<--no-sync> overrides the
I<bayes_learn_to_journal> configuration option. If not specified,
sa-learn will learn to the database directly. If specified, sa-learn
will learn to the journal file.
Note: I<--sync> and I<--no-sync> can be specified on the same commandline,
which is slightly confusing. In this case, the I<--no-sync> option is
ignored since there is no learn operation.
=item B<-L>, B<--local>
Do not perform any network accesses while learning details about the mail
messages. This should be normally used, as there really isn't anything
Bayes can learn from network lookup results. Official SpamAssassin plugins
do not currently do any network lookups when learning, but it's possible
that third party ones might.
=item B<--import>
If you previously used SpamAssassin's Bayesian learner without the C<DB_File>
module installed, it will have created files in other formats, such as
C<GDBM_File>, C<NDBM_File>, or C<SDBM_File>. This switch allows you to migrate
that old data into the C<DB_File> format. It will overwrite any data currently
in the C<DB_File>.
Can also be used with the B<--dbpath> I<path> option to specify the location of
the Bayes files to use.
=back
=head1 MIGRATION
There are now multiple backend storage modules available for storing
user's bayesian data. As such you might want to migrate from one
backend to another. Here is a simple procedure for migrating from one
backend to another.
Note that if you have individual user databases you will have to
perform a similar procedure for each one of them.
=over 4
=item sa-learn --sync
This will sync any outstanding journal entries
=item sa-learn --backup E<gt> backup.txt
This will save all your Bayes data to a plain text file.
=item sa-learn --clear
This is optional, but good to do to clear out the old database.
=item Repeat!
At this point, if you have multiple databases, you should perform the
procedure above for each of them. (i.e. each user's database needs to
be backed up before continuing.)
=item Switch backends
Once you have backed up all databases you can update your
configuration for the new database backend. This will involve at least
the bayes_store_module config option and may involve some additional
config options depending on what is required by the module. (For
example, you may need to configure an SQL database.)
=item sa-learn --restore backup.txt
Again, you need to do this for every database.
=back
If you are migrating to SQL you can make use of the -u I<username>
option in sa-learn to populate each user's database. Otherwise, you
must run sa-learn as the user who database you are restoring.
=head1 INTRODUCTION TO BAYESIAN FILTERING
(Thanks to Michael Bell for this section!)
For a more lengthy description of how this works, go to
http://www.paulgraham.com/ and see "A Plan for Spam". It's reasonably
readable, even if statistics make me break out in hives.
The short semi-inaccurate version: Given training, a spam heuristics engine
can take the most "spammy" and "hammy" words and apply probabilistic
analysis. Furthermore, once given a basis for the analysis, the engine can
continue to learn iteratively by applying both the non-Bayesian and Bayesian
rulesets together to create evolving "intelligence".
SpamAssassin 2.50 and later supports Bayesian spam analysis, in
the form of the BAYES rules. This is a new feature, quite powerful,
and is disabled until enough messages have been learnt.
The pros of Bayesian spam analysis:
=over 4
=item Can greatly reduce false positives and false negatives.
It learns from your mail, so it is tailored to your unique e-mail flow.
=item Once it starts learning, it can continue to learn from SpamAssassin
and improve over time.
=back
And the cons:
=over 4
=item A decent number of messages are required before results are useful
for ham/spam determination.
=item It's hard to explain why a message is or isn't marked as spam.
i.e.: a straightforward rule, that matches, say, "VIAGRA" is
easy to understand. If it generates a false positive or false negative,
it is fairly easy to understand why.
With Bayesian analysis, it's all probabilities - "because the past says
it is likely as this falls into a probabilistic distribution common to past
spam in your systems". Tell that to your users! Tell that to the client
when he asks "what can I do to change this". (By the way, the answer in
this case is "use welcomelisting".)
=item It will take disk space and memory.
The databases it maintains take quite a lot of resources to store and use.
=back
=head1 GETTING STARTED
Still interested? Ok, here's the guidelines for getting this working.
First a high-level overview:
=over 4
=item Build a significant sample of both ham and spam.
I suggest several thousand of each, placed in SPAM and HAM directories or
mailboxes. Yes, you MUST hand-sort this - otherwise the results won't be much
better than SpamAssassin on its own. Verify the spamminess/haminess of EVERY
message. You're urged to avoid using a publicly available corpus (sample) -
this must be taken from YOUR mail server, if it is to be statistically useful.
Otherwise, the results may be pretty skewed.
=item Use this tool to teach SpamAssassin about these samples, like so:
sa-learn --spam /path/to/spam/folder
sa-learn --ham /path/to/ham/folder
sa-learn --ham hampath1 hampath2 --spam spampath1 spampath2
...
Let SpamAssassin proceed, learning stuff. When it finds ham and spam
it will add the "interesting tokens" to the database.
=item If you need SpamAssassin to forget about specific messages, use
the B<--forget> option.
This can be applied to either ham or spam that has run through the
B<sa-learn> processes. It's a bit of a hammer, really, lowering the
weighting of the specific tokens in that message (only if that message has
been processed before).
=item Learning from single messages uses a command like this:
sa-learn --ham --no-sync mailmessage
This is handy for binding to a key in your mail user agent. It's very fast, as
all the time-consuming stuff is deferred until you run with the C<--sync>
option.
=item Autolearning is enabled by default
If you don't have a corpus of mail saved to learn, you can let
SpamAssassin automatically learn the mail that you receive. If you are
autolearning from scratch, the amount of mail you receive will determine
how long until the BAYES_* rules are activated.
=back
=head1 EFFECTIVE TRAINING
Learning filters require training to be effective. If you don't train
them, they won't work. In addition, you need to train them with new
messages regularly to keep them up-to-date, or their data will become
stale and impact accuracy.
You need to train with both spam I<and> ham mails. One type of mail
alone will not have any effect.
Note that if your mail folders contain things like forwarded spam,
discussions of spam-catching rules, etc., this will cause trouble. You
should avoid scanning those messages if possible. (An easy way to do this
is to move them aside, into a folder which is not scanned.)
If the messages you are learning from have already been filtered through
SpamAssassin, the learner will compensate for this. In effect, it learns what
each message would look like if you had run C<spamassassin -d> over it in
advance.
Another thing to be aware of, is that typically you should aim to train
with at least 1000 messages of spam, and 1000 ham messages, if
possible. More is better, but anything over about 5000 messages does not
improve accuracy significantly in our tests.
Be careful that you train from the same source -- for example, if you train
on old spam, but new ham mail, then the classifier will think that
a mail with an old date stamp is likely to be spam.
It's also worth noting that training with a very small quantity of
ham, will produce atrocious results. You should aim to train with at
least the same amount (or more if possible!) of ham data than spam.
On an on-going basis, it is best to keep training the filter to make
sure it has fresh data to work from. There are various ways to do
this:
=over 4
=item 1. Supervised learning
This means keeping a copy of all or most of your mail, separated into spam
and ham piles, and periodically re-training using those. It produces
the best results, but requires more work from you, the user.
(An easy way to do this, by the way, is to create a new folder for
'deleted' messages, and instead of deleting them from other folders,
simply move them in there instead. Then keep all spam in a separate
folder and never delete it. As long as you remember to move misclassified
mails into the correct folder set, it is easy enough to keep up to date.)
=item 2. Unsupervised learning from Bayesian classification
Another way to train is to chain the results of the Bayesian classifier
back into the training, so it reinforces its own decisions. This is only
safe if you then retrain it based on any errors you discover.
SpamAssassin does not support this method, due to experimental results
which strongly indicate that it does not work well, and since Bayes is
only one part of the resulting score presented to the user (while Bayes
may have made the wrong decision about a mail, it may have been overridden
by another system).
=item 3. Unsupervised learning from SpamAssassin rules
Also called 'auto-learning' in SpamAssassin. Based on statistical
analysis of the SpamAssassin success rates, we can automatically train the
Bayesian database with a certain degree of confidence that our training
data is accurate.
It should be supplemented with some supervised training in addition, if
possible.
This is the default, but can be turned off by setting the SpamAssassin
configuration parameter C<bayes_auto_learn> to 0.
=item 4. Mistake-based training
This means training on a small number of mails, then only training on
messages that SpamAssassin classifies incorrectly. This works, but it
takes longer to get it right than a full training session would.
=back
=head1 FILES
B<sa-learn> and the other parts of SpamAssassin's Bayesian learner,
use a set of persistent database files to store the learnt tokens, as follows.
=over 4
=item bayes_toks
The database of tokens, containing the tokens learnt, their count of
occurrences in ham and spam, and the timestamp when the token was last
seen in a message.
This database also contains some 'magic' tokens, as follows: the version
number of the database, the number of ham and spam messages learnt, the
number of tokens in the database, and timestamps of: the last journal
sync, the last expiry run, the last expiry token reduction count, the
last expiry timestamp delta, the oldest token timestamp in the database,
and the newest token timestamp in the database.
This is a database file, using C<DB_File>. The database 'version
number' is 0 for databases from 2.5x, 1 for databases from certain 2.6x
development releases, 2 for 2.6x, and 3 for 3.0 and later releases.
=item bayes_seen
A map of Message-Id and some data from headers and body to what that
message was learnt as. This is used so that SpamAssassin can avoid
re-learning a message it has already seen, and so it can reverse the
training if you later decide that message was learnt incorrectly.
This is a database file, using C<DB_File>.
=item bayes_journal
While SpamAssassin is scanning mails, it needs to track which tokens
it uses in its calculations. To avoid the contention of having each
SpamAssassin process attempting to gain write access to the Bayes DB,
the token timestamps are written to a 'journal' file which will later
(either automatically or via C<sa-learn --sync>) be used to synchronize
the Bayes DB.
Also, through the use of C<bayes_learn_to_journal>, or when using the
C<--no-sync> option with sa-learn, the actual learning data will take
be placed into the journal for later synchronization. This is typically
useful for high-traffic sites to avoid the same contention as stated
above.
=back
=head1 EXPIRATION
Since SpamAssassin can auto-learn messages, the Bayes database files
could increase perpetually until they fill your disk. To control this,
SpamAssassin performs journal synchronization and bayes expiration
periodically when certain criteria (listed below) are met.
SpamAssassin can sync the journal and expire the DB tokens either
manually or opportunistically. A journal sync is due if I<--sync>
is passed to sa-learn (manual), or if the following is true
(opportunistic):
=over 4
=item - bayes_journal_max_size does not equal 0 (means don't sync)
=item - the journal file exists
=back
and either:
=over 4
=item - the journal file has a size greater than bayes_journal_max_size
=back
or
=over 4
=item - a journal sync has previously occurred, and at least 1 day has
passed since that sync
=back
Expiry is due if I<--force-expire> is passed to sa-learn (manual),
or if all of the following are true (opportunistic):
=over 4
=item - the last expire was attempted at least 12hrs ago
=item - bayes_auto_expire does not equal 0
=item - the number of tokens in the DB is E<gt> 100,000
=item - the number of tokens in the DB is E<gt> bayes_expiry_max_db_size
=item - there is at least a 12 hr difference between the oldest and newest token atimes
=back
=head2 EXPIRE LOGIC
If either the manual or opportunistic method causes an expire run
to start, here is the logic that is used:
=over 4
=item - figure out how many tokens to keep. take the larger of
either bayes_expiry_max_db_size * 75% or 100,000 tokens. therefore, the goal
reduction is number of tokens - number of tokens to keep.
=item - if the reduction number is < 1000 tokens, abort (not worth the effort).
=item - if an expire has been done before, guesstimate the new
atime delta based on the old atime delta. (new_atime_delta =
old_atime_delta * old_reduction_count / goal)
=item - if no expire has been done before, or the last expire looks
"weird", do an estimation pass. The definition of "weird" is:
=over 8
=item - last expire over 30 days ago
=item - last atime delta was < 12 hrs
=item - last reduction count was < 1000 tokens
=item - estimated new atime delta is < 12 hrs
=item - the difference between the last reduction count and the goal reduction count is E<gt> 50%
=back
=back
=head2 ESTIMATION PASS LOGIC
Go through each of the DB's tokens. Starting at 12hrs, calculate
whether or not the token would be expired (based on the difference
between the token's atime and the db's newest token atime) and keep
the count. Work out from 12hrs exponentially by powers of 2. ie:
12hrs * 1, 12hrs * 2, 12hrs * 4, 12hrs * 8, and so on, up to 12hrs
* 512 (6144hrs, or 256 days).
The larger the delta, the smaller the number of tokens that will
be expired. Conversely, the number of tokens goes up as the delta
gets smaller. So starting at the largest atime delta, figure out
which delta will expire the most tokens without going above the
goal expiration count. Use this to choose the atime delta to use,
unless one of the following occurs:
=over 8
=item - the largest atime (smallest reduction count) would expire
too many tokens. this means the learned tokens are mostly old and
there needs to be new tokens learned before an expire can
occur.
=item - all of the atime choices result in 0 tokens being removed.
this means the tokens are all newer than 12 hours and there needs
to be new tokens learned before an expire can occur.
=item - the number of tokens that would be removed is < 1000. the
benefit isn't worth the effort. more tokens need to be learned.
=back
If the expire run gets past this point, it will continue to the end.
A new DB is created since the majority of DB libraries don't shrink the
DB file when tokens are removed. So we do the "create new, migrate old
to new, remove old, rename new" shuffle.
=head2 EXPIRY RELATED CONFIGURATION SETTINGS
=over 4
=item C<bayes_auto_expire> is used to specify whether or not SpamAssassin
ought to opportunistically attempt to expire the Bayes database.
The default is 1 (yes).
=item C<bayes_expiry_max_db_size> specifies both the auto-expire token
count point, as well as the resulting number of tokens after expiry
as described above. The default value is 150,000, which is roughly
equivalent to a 6Mb database file if you're using DB_File.
=item C<bayes_journal_max_size> specifies how large the Bayes
journal will grow before it is opportunistically synced. The
default value is 102400.
=back
=head1 INSTALLATION
The B<sa-learn> command is part of the B<Mail::SpamAssassin> Perl module.
Install this as a normal Perl module, using C<perl -MCPAN -e shell>,
or by hand.
=head1 SEE ALSO
spamassassin(1)
spamc(1)
Mail::SpamAssassin(3)
Mail::SpamAssassin::ArchiveIterator(3)
E<lt>http://www.paulgraham.com/E<gt>
Paul Graham's "A Plan For Spam" paper
E<lt>http://www.linuxjournal.com/article/6467E<gt>
Gary Robinson's f(x) and combining algorithms, as used in SpamAssassin
E<lt>http://web.archive.org/web/20120512230723/http://www.bgl.nu/~glouis/bogofilter/E<gt>
'Training on error' page. A discussion of various Bayes training regimes,
including 'train on error' and unsupervised training.
=head1 PREREQUISITES
C<Mail::SpamAssassin>
=head1 AUTHORS
The SpamAssassin(tm) Project E<lt>https://spamassassin.apache.org/E<gt>
=cut