| # |
| # Licensed to the Apache Software Foundation (ASF) under one or more |
| # contributor license agreements. See the NOTICE file distributed with |
| # this work for additional information regarding copyright ownership. |
| # The ASF licenses this file to You under the Apache License, Version 2.0 |
| # (the "License"); you may not use this file except in compliance with |
| # the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| SH = sh |
| GO = go |
| GIT = git |
| GO_PATH = $$($(GO) env GOPATH) |
| GO_BUILD = $(GO) build |
| GO_GET = $(GO) get |
| GO_LINT = $(GO_PATH)/bin/golangci-lint |
| |
| GO_TEST = $(GO) test |
| GO_TEST_LDFLAGS = |
| |
| REPODIR := $(shell dirname $(realpath $(firstword $(MAKEFILE_LIST))))/ |
| LINT_FILE_PATH = $(REPODIR).golangci.yml |
| |
| SHELL = /bin/bash |
| |
| HUB ?= docker.io/apache |
| PROJECT ?= skywalking-go |
| VERSION ?= $(shell git rev-parse --short HEAD) |
| |
| LOG_TARGET = echo -e "\033[0;32m===========> Running $@ ... \033[0m" |
| |
| ##@ General |
| |
| .PHONY: help |
| help: ## Display this help. |
| @awk 'BEGIN {FS = ":.*##"; printf "\nUsage:\n make \033[36m<target>\033[0m\n"} /^[a-zA-Z_0-9-]+:.*?##/ { printf " \033[36m%-15s\033[0m %s\n", $$1, $$2 } /^##@/ { printf "\n\033[1m%s\033[0m\n", substr($$0, 5) } ' $(MAKEFILE_LIST) |
| |
| deps: |
| $(GO_GET) -v -t -d ./... |
| |
| linter: |
| $(GO_LINT) version || curl -sfL https://raw.githubusercontent.com/golangci/golangci-lint/master/install.sh | sh -s -- -b $(GO_PATH)/bin v1.50.0 |
| |
| |
| ##@ Golang |
| |
| .PHONY: test |
| test: ## Run E2E scenario tests |
| @$(LOG_TARGET) |
| echo "mode: atomic" > ${REPODIR}/coverage.txt; |
| @for dir in $$(find . -name go.mod -exec dirname {} \; ); do \ |
| if [[ $$dir == "./test/plugins/scenarios/"* ]]; then \ |
| continue; \ |
| fi; \ |
| cd $$dir; \ |
| echo "Testing $$dir"; \ |
| go test -v -coverprofile=module_coverage.txt -covermode=atomic ./...; \ |
| test_status=$$?; \ |
| if [ -f module_coverage.txt ]; then \ |
| tail -n +2 module_coverage.txt >> ${REPODIR}/coverage.txt; \ |
| rm module_coverage.txt; \ |
| fi; \ |
| cd ${REPODIR}; \ |
| if [ $$test_status -ne 0 ]; then \ |
| echo "Error occurred during go test, exiting..."; \ |
| exit $$test_status; \ |
| fi; \ |
| done |
| |
| .PHONY: lint |
| lint: linter ## Run golangci-lint linter |
| @$(LOG_TARGET) |
| @for dir in $$(find . -name go.mod -exec dirname {} \; ); do \ |
| if [[ $$dir == "./test/plugins/scenarios/"* ]]; then \ |
| continue; \ |
| fi; \ |
| echo "Linting $$dir"; \ |
| (cd $$dir && $(GO_LINT) run -v --timeout 5m --config $(LINT_FILE_PATH) ./...); \ |
| if [ $$? -ne 0 ]; then \ |
| exit 1; \ |
| fi; \ |
| done |
| $(GO_LINT) run -v --timeout 5m ./... |
| |
| .PHONY: check |
| check: ## Run consistency checks |
| @$(LOG_TARGET) |
| go mod tidy |
| @if [ ! -z "`git status -s`" ]; then \ |
| echo "Following files are not consistent with CI:"; \ |
| git status -s; \ |
| git diff; \ |
| exit 1; \ |
| fi |
| |
| .PHONY: build |
| build: ## Build skywalking-go agent binary |
| @$(LOG_TARGET) |
| @make -C tools/go-agent build |
| |
| .PHONE: release |
| release: ## Build skywalking-go agent release |
| @$(LOG_TARGET) |
| /bin/sh tools/release/create_bin_release.sh |
| /bin/sh tools/release/create_source_release.sh |
| |
| base.all := go1.16 go1.17 go1.18 go1.19 go1.20 go1.21 go1.22 |
| base.each = $(word 1, $@) |
| |
| |
| ##@ Docker |
| |
| base.image.go1.16 := golang:1.16 |
| base.image.go1.17 := golang:1.17 |
| base.image.go1.18 := golang:1.18 |
| base.image.go1.19 := golang:1.19 |
| base.image.go1.20 := golang:1.20 |
| base.image.go1.21 := golang:1.21 |
| base.image.go1.22 := golang:1.22 |
| |
| docker.%: PLATFORMS = |
| docker.%: LOAD_OR_PUSH = --load |
| docker.push.%: PLATFORMS = --platform linux/amd64,linux/arm64 |
| docker.push.%: LOAD_OR_PUSH = --push |
| |
| .PHONY: $(base.all) |
| $(base.all:%=docker.%): BASE_IMAGE=$($(base.each:docker.%=base.image.%)) |
| $(base.all:%=docker.%): FINAL_TAG=$(VERSION)-$(base.each:docker.%=%) |
| $(base.all:%=docker.push.%): BASE_IMAGE=$($(base.each:docker.push.%=base.image.%)) |
| $(base.all:%=docker.push.%): FINAL_TAG=$(VERSION)-$(base.each:docker.push.%=%) |
| $(base.all:%=docker.%) $(base.all:%=docker.push.%): |
| @$(LOG_TARGET) |
| docker buildx create --use --driver docker-container --name skywalking_go > /dev/null 2>&1 || true |
| docker buildx build $(PLATFORMS) $(LOAD_OR_PUSH) \ |
| --no-cache \ |
| --build-arg "BASE_GO_IMAGE=$(BASE_IMAGE)" \ |
| --build-arg "VERSION=$(VERSION)" \ |
| . -t $(HUB)/$(PROJECT):$(FINAL_TAG) |
| docker buildx rm skywalking_go || true |
| |
| .PHONY: docker docker.push |
| docker: $(base.all:%=docker.%) ## Build docker images for skywalking-go agent and Push docker images to registry |
| docker.push: $(base.all:%=docker.push.%) |