blob: b5e0c151f8cc493a4fa5561cf4e6f8a61dd9cafe [file] [log] [blame]
/* ====================================================================
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
* ====================================================================
*/
#ifndef SERF_PROTOCOL_HTTP2_BUCKETS_H
#define SERF_PROTOCOL_HTTP2_BUCKETS_H
#include "serf_bucket_types.h"
/**
* @file serf_bucket_types.h
* @brief serf-supported bucket types
*/
/* ### this whole file needs docco ... */
#ifdef __cplusplus
extern "C" {
#endif
/* ==================================================================== */
extern const serf_bucket_type_t serf_bucket_type__http2_unframe;
#define SERF__BUCKET_IS_HTTP2_UNFRAME(b) SERF_BUCKET_CHECK((b), _http2_unframe)
typedef apr_status_t (*serf_bucket_end_of_frame_t)(
void *baton,
serf_bucket_t *unframe_bucket);
/* Creates a bucket that reads a single http2 frame from stream. Note that
unlike many other buckets destroying the unframe bucket doesn't destroy the
underlying stream.
The frame header information can be obtained by calling
serf__bucket_http2_unframe_read_info().
After the header has been read the remaining payload size can be retrieved
using serf_bucket_get_remaining()
*/
serf_bucket_t *
serf__bucket_http2_unframe_create(serf_bucket_t *stream,
apr_size_t max_payload_size,
serf_bucket_alloc_t *allocator);
/* Sets the end of frame handler on the frame, which will be called as soon as
the whole frame has been read from the contained stream */
void
serf__bucket_http2_unframe_set_eof(serf_bucket_t *bucket,
serf_bucket_end_of_frame_t end_of_frame,
void *end_of_frame_baton);
/* Obtains the frame header state, reading from the bucket if necessary.
If the header was read successfully (or was already read before calling)
the *stream_id, * frame_type and *flags values (when not pointing to NULL)
will be set to the requested values.
returns APR_SUCCESS when the header was already read before calling this,
function. Otherwise it will return the result of reading. */
apr_status_t
serf__bucket_http2_unframe_read_info(serf_bucket_t *bucket,
apr_int32_t *stream_id,
unsigned char *frame_type,
unsigned char *flags);
/* ==================================================================== */
extern const serf_bucket_type_t serf_bucket_type__http2_unpad;
#define SERF__BUCKET_IS_HTTP2_UNPAD(b) SERF_BUCKET_CHECK((b), _http2_unpad)
serf_bucket_t *
serf__bucket_http2_unpad_create(serf_bucket_t *stream,
serf_bucket_alloc_t *allocator);
/* ==================================================================== */
extern const serf_bucket_type_t serf_bucket_type__hpack;
#define SERF_BUCKET_IS_HPACK(b) SERF_BUCKET_CHECK((b), _hpack)
serf_bucket_t *
serf__bucket_hpack_create(serf_hpack_table_t *hpack_table,
serf_bucket_alloc_t *allocator);
/**
* Set, copies: header and value copied.
*
* Copy the specified @a header and @a value into the bucket, using space
* from this bucket's allocator.
*/
void serf__bucket_hpack_setc(serf_bucket_t *hpack_bucket,
const char *key,
const char *value);
/**
* Set, extended: fine grained copy control of key and value.
*
* Set the specified @a key, with length @a key_size with the
* @a value, and length @a value_size, into the bucket. The header will
* be copied if @a header_copy is set, and the value is copied if
* @a value_copy is set. If the values are not copied, then they should
* remain in scope at least as long as the bucket.
*
* If @a headers_bucket already contains a header with the same name
* as @a header, then append @a value to the existing value,
* separating with a comma (as per RFC 2616, section 4.2). In this
* case, the new value must be allocated and the header re-used, so
* behave as if @a value_copy were true and @a header_copy false.
*/
void
serf__bucket_hpack_setx(serf_bucket_t *hpack_bucket,
const char *key,
apr_size_t key_size,
int header_copy,
const char *value,
apr_size_t value_size,
int value_copy,
int dont_index,
int never_index);
const char *
serf__bucket_hpack_getc(serf_bucket_t *hpack_bucket,
const char *key);
/**
* @param baton opaque baton as passed to @see serf_bucket_hpack_do
* @param key The header key from this iteration through the table
* @param value The header value from this iteration through the table
*/
typedef int (serf_bucket_hpack_do_callback_fn_t)(void *baton,
const char *key,
apr_size_t keylen,
const char *value,
apr_size_t value_len);
/**
* Iterates over all headers of the message and invokes the callback
* function with header key and value. Stop iterating when no more
* headers are available or when the callback function returned a
* non-0 value.
*
* @param headers_bucket headers to iterate over
* @param func callback routine to invoke for every header in the bucket
* @param baton baton to pass on each invocation to func
*/
void
serf__bucket_hpack_do(serf_bucket_t *hpack_bucket,
serf_bucket_hpack_do_callback_fn_t func,
void *baton);
serf_hpack_table_t *
serf__hpack_table_create(int for_http2,
apr_size_t default_max_table_size,
apr_pool_t *result_pool);
void
serf__hpack_table_set_max_table_size(serf_hpack_table_t *hpack_tbl,
apr_size_t max_decoder_size,
apr_size_t max_encoder_size);
/* ==================================================================== */
extern const serf_bucket_type_t serf_bucket_type__hpack_decode;
#define SERF_BUCKET_IS_HPACK_DECODE(b) SERF_BUCKET_CHECK((b), hpack_decode)
/* The bucket will read as a HTTP/1 like header block,
starting with either a status or a request line and ending with "\r\n\r\n",
which allows using the result as the start of the result for a response
or request bucket.
*/
serf_bucket_t *
serf__bucket_hpack_decode_create(serf_bucket_t *stream,
apr_size_t max_header_size,
serf_hpack_table_t *hpack_table,
serf_bucket_alloc_t *alloc);
/* ==================================================================== */
extern const serf_bucket_type_t serf_bucket_type__http2_frame;
#define SERF__BUCKET_IS_HTTP2_FRAME(b) SERF_BUCKET_CHECK((b), _http2_frame)
serf_bucket_t *
serf__bucket_http2_frame_create(serf_bucket_t *stream,
unsigned char frame_type,
unsigned char flags,
apr_int32_t *stream_id,
void(*stream_id_alloc)(
void *baton,
apr_int32_t *stream_id),
void *stream_id_baton,
apr_uint32_t max_payload_size,
serf_bucket_alloc_t *alloc);
/* ==================================================================== */
#ifdef __cplusplus
}
#endif
#endif /* !SERF_PROTOCOL_HTTP2_BUCKETS_H */