| # Makefile.in generated by automake 1.9.5 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
| # 2003, 2004, 2005 Free Software Foundation, Inc. |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| # |
| # Copyright 2006 The Apache Software Foundation. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| srcdir = @srcdir@ |
| top_srcdir = @top_srcdir@ |
| VPATH = @srcdir@ |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| top_builddir = .. |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| INSTALL = @INSTALL@ |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| subdir = include |
| DIST_COMMON = $(nobase_include_HEADERS) $(srcdir)/Makefile.am \ |
| $(srcdir)/Makefile.in |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \ |
| $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| mkinstalldirs = $(install_sh) -d |
| CONFIG_HEADER = $(top_builddir)/src/framework/XSECConfig.hpp |
| CONFIG_CLEAN_FILES = |
| SOURCES = |
| DIST_SOURCES = |
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| am__vpath_adj = case $$p in \ |
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| *) f=$$p;; \ |
| esac; |
| am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; |
| am__installdirs = "$(DESTDIR)$(includedir)" |
| nobase_includeHEADERS_INSTALL = $(install_sh_DATA) |
| HEADERS = $(nobase_include_HEADERS) |
| ETAGS = etags |
| CTAGS = ctags |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| ACLOCAL = @ACLOCAL@ |
| AMDEP_FALSE = @AMDEP_FALSE@ |
| AMDEP_TRUE = @AMDEP_TRUE@ |
| AMTAR = @AMTAR@ |
| AR = @AR@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| CC = @CC@ |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CXX = @CXX@ |
| CXXCPP = @CXXCPP@ |
| CXXDEPMODE = @CXXDEPMODE@ |
| CXXFLAGS = @CXXFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| ECHO = @ECHO@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EXEEXT = @EXEEXT@ |
| F77 = @F77@ |
| FFLAGS = @FFLAGS@ |
| INSTALL_COMMAND_1 = @INSTALL_COMMAND_1@ |
| INSTALL_COMMAND_2 = @INSTALL_COMMAND_2@ |
| INSTALL_COMMAND_3 = @INSTALL_COMMAND_3@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| LDFLAGS = @LDFLAGS@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LINK_COMMAND_1 = @LINK_COMMAND_1@ |
| LINK_COMMAND_2 = @LINK_COMMAND_2@ |
| LN_S = @LN_S@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| MAINT = @MAINT@ |
| MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ |
| MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ |
| MAKEINFO = @MAKEINFO@ |
| OBJEXT = @OBJEXT@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| PTHREAD_CC = @PTHREAD_CC@ |
| PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ |
| PTHREAD_LIBS = @PTHREAD_LIBS@ |
| RANLIB = @RANLIB@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| STRIP = @STRIP@ |
| VERSION = @VERSION@ |
| XSEC_AM_HAVE_OPENSSL_FALSE = @XSEC_AM_HAVE_OPENSSL_FALSE@ |
| XSEC_AM_HAVE_OPENSSL_TRUE = @XSEC_AM_HAVE_OPENSSL_TRUE@ |
| ac_ct_AR = @ac_ct_AR@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_CXX = @ac_ct_CXX@ |
| ac_ct_F77 = @ac_ct_F77@ |
| ac_ct_RANLIB = @ac_ct_RANLIB@ |
| ac_ct_STRIP = @ac_ct_STRIP@ |
| acx_pthread_config = @acx_pthread_config@ |
| am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ |
| am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ |
| am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ |
| am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| bindir = @bindir@ |
| bitstobuild = @bitstobuild@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| cc = @cc@ |
| cc1 = @cc1@ |
| cc4 = @cc4@ |
| cflags = @cflags@ |
| cppflags = @cppflags@ |
| cxx = @cxx@ |
| cxxflags = @cxxflags@ |
| datadir = @datadir@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install = @install@ |
| install_data = @install_data@ |
| install_sh = @install_sh@ |
| ldflags = @ldflags@ |
| lib_major_name = @lib_major_name@ |
| lib_name = @lib_name@ |
| lib_short_name = @lib_short_name@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| libs = @libs@ |
| link = @link@ |
| ln_s = @ln_s@ |
| localstatedir = @localstatedir@ |
| make_shared = @make_shared@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| objsuffix = @objsuffix@ |
| oldincludedir = @oldincludedir@ |
| osver = @osver@ |
| package_libtool_version = @package_libtool_version@ |
| package_name = @package_name@ |
| package_tarname = @package_tarname@ |
| package_version = @package_version@ |
| package_version_major = @package_version_major@ |
| platform = @platform@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| shlibsuffix = @shlibsuffix@ |
| sysconfdir = @sysconfdir@ |
| target_alias = @target_alias@ |
| threads = @threads@ |
| transcoder = @transcoder@ |
| BUILT_SOURCES = xsec ${lib_includes} |
| nobase_include_HEADERS = ${lib_includes} |
| |
| # The required include files |
| |
| # A line like the following will generate a list of headers |
| # for a given directory: (must be issued from base directory) |
| # |
| # find src/framework -name '*.hpp' -exec echo {} \\ ";" | sed "s/src/ xsec/g" |
| |
| # Canon |
| |
| # enc |
| |
| # dsig |
| |
| # framework |
| |
| # transformers |
| |
| # utils |
| |
| # XML Encryption |
| |
| # XML Key Management |
| lib_includes = xsec/canon/XSECXMLNSStack.hpp xsec/canon/XSECCanon.hpp \ |
| xsec/canon/XSECC14n20010315.hpp xsec/enc/XSECCryptoKeyHMAC.hpp \ |
| xsec/enc/XSECCryptoX509.hpp xsec/enc/XSECCryptoKeyDSA.hpp \ |
| xsec/enc/XSECKeyInfoResolver.hpp xsec/enc/XSECCryptoHash.hpp \ |
| xsec/enc/XSECCryptoBase64.hpp \ |
| xsec/enc/XSECCryptoSymmetricKey.hpp xsec/enc/XSECCryptoKey.hpp \ |
| xsec/enc/XSECCryptoProvider.hpp \ |
| xsec/enc/XSECKeyInfoResolverDefault.hpp \ |
| xsec/enc/XSECCryptoKeyRSA.hpp xsec/enc/XSECCryptoException.hpp \ |
| xsec/enc/XSECCryptoUtils.hpp \ |
| xsec/enc/XSCrypt/XSCryptCryptoBase64.hpp \ |
| xsec/enc/OpenSSL/OpenSSLCryptoBase64.hpp \ |
| xsec/enc/OpenSSL/OpenSSLCryptoSymmetricKey.hpp \ |
| xsec/enc/OpenSSL/OpenSSLCryptoProvider.hpp \ |
| xsec/enc/OpenSSL/OpenSSLCryptoKeyRSA.hpp \ |
| xsec/enc/OpenSSL/OpenSSLCryptoX509.hpp \ |
| xsec/enc/OpenSSL/OpenSSLCryptoHashHMAC.hpp \ |
| xsec/enc/OpenSSL/OpenSSLCryptoKeyDSA.hpp \ |
| xsec/enc/OpenSSL/OpenSSLCryptoKeyHMAC.hpp \ |
| xsec/enc/OpenSSL/OpenSSLCryptoHash.hpp \ |
| xsec/enc/NSS/NSSCryptoX509.hpp \ |
| xsec/enc/NSS/NSSCryptoHashHMAC.hpp \ |
| xsec/enc/NSS/NSSCryptoKeyDSA.hpp \ |
| xsec/enc/NSS/NSSCryptoKeyHMAC.hpp \ |
| xsec/enc/NSS/NSSCryptoHash.hpp \ |
| xsec/enc/NSS/NSSCryptoSymmetricKey.hpp \ |
| xsec/enc/NSS/NSSCryptoProvider.hpp \ |
| xsec/enc/NSS/NSSCryptoKeyRSA.hpp \ |
| xsec/dsig/DSIGKeyInfoSPKIData.hpp xsec/dsig/DSIGXPathHere.hpp \ |
| xsec/dsig/DSIGAlgorithmHandlerDefault.hpp \ |
| xsec/dsig/DSIGXPathFilterExpr.hpp \ |
| xsec/dsig/DSIGKeyInfoX509.hpp xsec/dsig/DSIGKeyInfoList.hpp \ |
| xsec/dsig/DSIGKeyInfoValue.hpp xsec/dsig/DSIGTransformC14n.hpp \ |
| xsec/dsig/DSIGTransformXSL.hpp xsec/dsig/DSIGKeyInfo.hpp \ |
| xsec/dsig/DSIGKeyInfoPGPData.hpp xsec/dsig/DSIGObject.hpp \ |
| xsec/dsig/DSIGTransformList.hpp xsec/dsig/DSIGTransform.hpp \ |
| xsec/dsig/DSIGTransformBase64.hpp \ |
| xsec/dsig/DSIGTransformXPath.hpp \ |
| xsec/dsig/DSIGKeyInfoMgmtData.hpp xsec/dsig/DSIGSignedInfo.hpp \ |
| xsec/dsig/DSIGTransformXPathFilter.hpp \ |
| xsec/dsig/DSIGReferenceList.hpp xsec/dsig/DSIGReference.hpp \ |
| xsec/dsig/DSIGSignature.hpp xsec/dsig/DSIGKeyInfoName.hpp \ |
| xsec/dsig/DSIGTransformEnvelope.hpp \ |
| xsec/dsig/DSIGConstants.hpp \ |
| xsec/framework/XSECAlgorithmHandler.hpp \ |
| xsec/framework/XSECURIResolver.hpp xsec/framework/XSECDefs.hpp \ |
| xsec/framework/XSECEnv.hpp xsec/framework/XSECException.hpp \ |
| xsec/framework/XSECError.hpp xsec/framework/XSECProvider.hpp \ |
| xsec/framework/XSECConfig.hpp \ |
| xsec/framework/XSECURIResolverXerces.hpp \ |
| xsec/framework/XSECAlgorithmMapper.hpp \ |
| xsec/framework/XSECW32Config.hpp \ |
| xsec/transformers/TXFMXPathFilter.hpp \ |
| xsec/transformers/TXFMSHA1.hpp \ |
| xsec/transformers/TXFMParser.hpp \ |
| xsec/transformers/TXFMOutputFile.hpp \ |
| xsec/transformers/TXFMURL.hpp xsec/transformers/TXFMBase.hpp \ |
| xsec/transformers/TXFMCipher.hpp \ |
| xsec/transformers/TXFMEnvelope.hpp \ |
| xsec/transformers/TXFMChain.hpp xsec/transformers/TXFMMD5.hpp \ |
| xsec/transformers/TXFMDocObject.hpp \ |
| xsec/transformers/TXFMConcatChains.hpp \ |
| xsec/transformers/TXFMSB.hpp xsec/transformers/TXFMC14n.hpp \ |
| xsec/transformers/TXFMXSL.hpp xsec/transformers/TXFMXPath.hpp \ |
| xsec/transformers/TXFMBase64.hpp \ |
| xsec/utils/unixutils/XSECURIResolverGenericUnix.hpp \ |
| xsec/utils/unixutils/XSECBinHTTPURIInputStream.hpp \ |
| xsec/utils/XSECSafeBuffer.hpp xsec/utils/XSECSOAPRequestor.hpp \ |
| xsec/utils/XSECTXFMInputSource.hpp \ |
| xsec/utils/XSECNameSpaceExpander.hpp \ |
| xsec/utils/XSECSOAPRequestorSimple.hpp \ |
| xsec/utils/XSECXPathNodeList.hpp \ |
| xsec/utils/XSECSafeBufferFormatter.hpp \ |
| xsec/utils/XSECDOMUtils.hpp \ |
| xsec/utils/XSECBinTXFMInputStream.hpp \ |
| xsec/utils/XSECPlatformUtils.hpp \ |
| xsec/xenc/XENCEncryptionMethod.hpp \ |
| xsec/xenc/XENCEncryptedType.hpp xsec/xenc/XENCCipherData.hpp \ |
| xsec/xenc/XENCEncryptedKey.hpp xsec/xenc/XENCCipherValue.hpp \ |
| xsec/xenc/XENCEncryptedData.hpp \ |
| xsec/xenc/XENCCipherReference.hpp xsec/xenc/XENCCipher.hpp \ |
| xsec/xkms/XKMSNotBoundAuthentication.hpp \ |
| xsec/xkms/XKMSValidateResult.hpp \ |
| xsec/xkms/XKMSValidityInterval.hpp \ |
| xsec/xkms/XKMSStatusRequest.hpp \ |
| xsec/xkms/XKMSRegisterRequest.hpp \ |
| xsec/xkms/XKMSPendingRequest.hpp \ |
| xsec/xkms/XKMSCompoundRequest.hpp xsec/xkms/XKMSUseKeyWith.hpp \ |
| xsec/xkms/XKMSValidateRequest.hpp \ |
| xsec/xkms/XKMSUnverifiedKeyBinding.hpp \ |
| xsec/xkms/XKMSLocateResult.hpp xsec/xkms/XKMSRespondWith.hpp \ |
| xsec/xkms/XKMSQueryKeyBinding.hpp \ |
| xsec/xkms/XKMSPrototypeKeyBinding.hpp \ |
| xsec/xkms/XKMSKeyBindingAbstractType.hpp \ |
| xsec/xkms/XKMSMessageAbstractType.hpp \ |
| xsec/xkms/XKMSMessageFactory.hpp xsec/xkms/XKMSConstants.hpp \ |
| xsec/xkms/XKMSRequestAbstractType.hpp xsec/xkms/XKMSResult.hpp \ |
| xsec/xkms/XKMSAuthentication.hpp \ |
| xsec/xkms/XKMSLocateRequest.hpp xsec/xkms/XKMSResultType.hpp \ |
| xsec/xkms/XKMSStatusResult.hpp xsec/xkms/XKMSKeyBinding.hpp \ |
| xsec/xkms/XKMSCompoundResult.hpp \ |
| xsec/xkms/XKMSRegisterResult.hpp \ |
| xsec/xkms/XKMSResponseMechanism.hpp xsec/xkms/XKMSStatus.hpp \ |
| xsec/xkms/XKMSRevokeRequest.hpp xsec/xkms/XKMSRevokeResult.hpp \ |
| xsec/xkms/XKMSRecoverKeyBinding.hpp \ |
| xsec/xkms/XKMSRevokeKeyBinding.hpp \ |
| xsec/xkms/XKMSRSAKeyPair.hpp xsec/xkms/XKMSRecoverResult.hpp \ |
| xsec/xkms/XKMSReissueResult.hpp \ |
| xsec/xkms/XKMSRecoverRequest.hpp \ |
| xsec/xkms/XKMSReissueRequest.hpp \ |
| xsec/xkms/XKMSReissueKeyBinding.hpp |
| |
| # Now the rules for copying the include files over |
| SUFFIXES = .hpp |
| all: $(BUILT_SOURCES) |
| $(MAKE) $(AM_MAKEFLAGS) all-am |
| |
| .SUFFIXES: |
| .SUFFIXES: .hpp |
| $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ |
| && exit 0; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu include/Makefile'; \ |
| cd $(top_srcdir) && \ |
| $(AUTOMAKE) --gnu include/Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| |
| $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| |
| distclean-libtool: |
| -rm -f libtool |
| uninstall-info-am: |
| install-nobase_includeHEADERS: $(nobase_include_HEADERS) |
| @$(NORMAL_INSTALL) |
| test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)" |
| @$(am__vpath_adj_setup) \ |
| list='$(nobase_include_HEADERS)'; for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| $(am__vpath_adj) \ |
| echo " $(nobase_includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \ |
| $(nobase_includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \ |
| done |
| |
| uninstall-nobase_includeHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @$(am__vpath_adj_setup) \ |
| list='$(nobase_include_HEADERS)'; for p in $$list; do \ |
| $(am__vpath_adj) \ |
| echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \ |
| rm -f "$(DESTDIR)$(includedir)/$$f"; \ |
| done |
| |
| ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| mkid -fID $$unique |
| tags: TAGS |
| |
| TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$tags $$unique; \ |
| fi |
| ctags: CTAGS |
| CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| test -z "$(CTAGS_ARGS)$$tags$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$tags $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && cd $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) $$here |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| |
| distdir: $(DISTFILES) |
| $(mkdir_p) $(distdir)/xsec/canon $(distdir)/xsec/dsig $(distdir)/xsec/enc $(distdir)/xsec/enc/NSS $(distdir)/xsec/enc/OpenSSL $(distdir)/xsec/enc/XSCrypt $(distdir)/xsec/framework $(distdir)/xsec/transformers $(distdir)/xsec/utils $(distdir)/xsec/utils/unixutils $(distdir)/xsec/xenc $(distdir)/xsec/xkms |
| @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ |
| list='$(DISTFILES)'; for file in $$list; do \ |
| case $$file in \ |
| $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ |
| $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ |
| esac; \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
| dir="/$$dir"; \ |
| $(mkdir_p) "$(distdir)$$dir"; \ |
| else \ |
| dir=''; \ |
| fi; \ |
| if test -d $$d/$$file; then \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
| fi; \ |
| cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
| else \ |
| test -f $(distdir)/$$file \ |
| || cp -p $$d/$$file $(distdir)/$$file \ |
| || exit 1; \ |
| fi; \ |
| done |
| check-am: all-am |
| check: $(BUILT_SOURCES) |
| $(MAKE) $(AM_MAKEFLAGS) check-am |
| all-am: Makefile $(HEADERS) |
| installdirs: |
| for dir in "$(DESTDIR)$(includedir)"; do \ |
| test -z "$$dir" || $(mkdir_p) "$$dir"; \ |
| done |
| install: $(BUILT_SOURCES) |
| $(MAKE) $(AM_MAKEFLAGS) install-am |
| install-exec: install-exec-am |
| install-data: install-data-am |
| uninstall: uninstall-am |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-am |
| install-strip: |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| `test -z '$(STRIP)' || \ |
| echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install |
| mostlyclean-generic: |
| |
| clean-generic: |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) |
| clean: clean-am |
| |
| clean-am: clean-generic clean-libtool clean-local mostlyclean-am |
| |
| distclean: distclean-am |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic distclean-libtool \ |
| distclean-tags |
| |
| dvi: dvi-am |
| |
| dvi-am: |
| |
| html: html-am |
| |
| info: info-am |
| |
| info-am: |
| |
| install-data-am: install-nobase_includeHEADERS |
| |
| install-exec-am: |
| |
| install-info: install-info-am |
| |
| install-man: |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-am |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-am |
| |
| mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
| |
| pdf: pdf-am |
| |
| pdf-am: |
| |
| ps: ps-am |
| |
| ps-am: |
| |
| uninstall-am: uninstall-info-am uninstall-nobase_includeHEADERS |
| |
| .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ |
| clean-libtool clean-local ctags distclean distclean-generic \ |
| distclean-libtool distclean-tags distdir dvi dvi-am html \ |
| html-am info info-am install install-am install-data \ |
| install-data-am install-exec install-exec-am install-info \ |
| install-info-am install-man install-nobase_includeHEADERS \ |
| install-strip installcheck installcheck-am installdirs \ |
| maintainer-clean maintainer-clean-generic mostlyclean \ |
| mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ |
| tags uninstall uninstall-am uninstall-info-am \ |
| uninstall-nobase_includeHEADERS |
| |
| |
| xsec/%.hpp: ../src/%.hpp |
| cp ../src/$*.hpp $@ |
| |
| xsec: |
| mkdir xsec |
| mkdir xsec/canon |
| mkdir xsec/dsig |
| mkdir xsec/framework |
| mkdir xsec/utils |
| mkdir xsec/utils/unixutils |
| mkdir xsec/enc |
| mkdir xsec/enc/OpenSSL |
| mkdir xsec/enc/NSS |
| mkdir xsec/enc/XSCrypt |
| mkdir xsec/transformers |
| mkdir xsec/xenc |
| mkdir xsec/xkms |
| |
| # Cleaning |
| |
| clean-local: |
| $(RM) -r xsec |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |
