lang/cs/.nuget/NuGet.targets

<?xml version="1.0" encoding="utf-8"?>
<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements.  See the NOTICE file
distributed with this work for additional information
regarding copyright ownership.  The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License.  You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied.  See the License for the
specific language governing permissions and limitations
under the License.
-->
<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
    <PropertyGroup>
        <SolutionDir Condition="$(SolutionDir) == '' Or $(SolutionDir) == '*Undefined*'">$(MSBuildProjectDirectory)\..</SolutionDir>

        <!-- Enable the restore command to run before builds -->
        <RestorePackages Condition="  '$(RestorePackages)' == '' ">false</RestorePackages>

        <!-- Property that enables building a package from a project -->
        <BuildPackage Condition=" '$(BuildPackage)' == '' ">false</BuildPackage>

        <!-- Determines if package restore consent is required to restore packages -->
        <RequireRestoreConsent Condition=" '$(RequireRestoreConsent)' != 'false' ">true</RequireRestoreConsent>

        <!-- Download NuGet.exe if it does not already exist -->
        <DownloadNuGetExe Condition=" '$(DownloadNuGetExe)' == '' ">true</DownloadNuGetExe>
    </PropertyGroup>
    <Import Project="$(SolutionDir)\build.props" Condition="'$(BuildDotPropsIsImported)'!='true'" />
    <Import Project="$(SolutionDir)\build.targets" Condition="'$(BuildDotTargetsIsImported)'!='true'"/>
    <ItemGroup Condition=" '$(PackageSources)' == '' ">
        <!-- Package sources used to restore packages. By default, registered sources under %APPDATA%\NuGet\NuGet.Config will be used -->
        <!-- The official NuGet package source (https://www.nuget.org/api/v2/) will be excluded if package sources are specified and it does not appear in the list -->
        <!--
            <PackageSource Include="https://www.nuget.org/api/v2/" />
            <PackageSource Include="https://my-nuget-source/nuget/" />
        -->
    </ItemGroup>

    <PropertyGroup Condition=" '$(OS)' == 'Windows_NT'">
        <!-- Windows specific commands -->
        <NuGetToolsPath>$([System.IO.Path]::Combine($(SolutionDir), ".nuget"))</NuGetToolsPath>
    </PropertyGroup>

    <PropertyGroup Condition=" '$(OS)' != 'Windows_NT'">
        <!-- We need to launch nuget.exe with the mono command if we're not on windows -->
        <NuGetToolsPath>$(SolutionDir)\.nuget</NuGetToolsPath>
    </PropertyGroup>

    <PropertyGroup>
        <PackagesProjectConfig Condition=" '$(OS)' == 'Windows_NT'">$(MSBuildProjectDirectory)\packages.$(MSBuildProjectName.Replace(' ', '_')).config</PackagesProjectConfig>
        <PackagesProjectConfig Condition=" '$(OS)' != 'Windows_NT'">$(MSBuildProjectDirectory)\packages.$(MSBuildProjectName).config</PackagesProjectConfig>
    </PropertyGroup>

    <PropertyGroup>
      <PackagesConfig Condition="Exists('$(MSBuildProjectDirectory)\packages.config')">$(MSBuildProjectDirectory)\packages.config</PackagesConfig>
      <PackagesConfig Condition="Exists('$(PackagesProjectConfig)')">$(PackagesProjectConfig)</PackagesConfig>
    </PropertyGroup>
    
    <PropertyGroup>
        <!-- NuGet command -->
        <NuGetExePath Condition=" '$(NuGetExePath)' == '' ">$(NuGetToolsPath)\NuGet.exe</NuGetExePath>
        <PackageSources Condition=" $(PackageSources) == '' ">@(PackageSource)</PackageSources>

        <NuGetCommand Condition=" '$(OS)' == 'Windows_NT'">"$(NuGetExePath)"</NuGetCommand>
        <NuGetCommand Condition=" '$(OS)' != 'Windows_NT' ">mono --runtime=v4.0.30319 "$(NuGetExePath)"</NuGetCommand>

        <PackageOutputDir Condition="$(PackageOutputDir) == ''">$(SolutionDir)\.nuget\packages</PackageOutputDir>

        <RequireConsentSwitch Condition=" $(RequireRestoreConsent) == 'true' ">-RequireConsent</RequireConsentSwitch>
        <NonInteractiveSwitch Condition=" '$(VisualStudioVersion)' != '' AND '$(OS)' == 'Windows_NT' ">-NonInteractive</NonInteractiveSwitch>

        <PaddedSolutionDir Condition=" '$(OS)' == 'Windows_NT'">"$(SolutionDir) "</PaddedSolutionDir>
        <PaddedSolutionDir Condition=" '$(OS)' != 'Windows_NT' ">"$(SolutionDir)"</PaddedSolutionDir>

        <!-- Nuspec file -->
        <FinalizedNuspecFile>$(SolutionDir)\$(AssemblyName)\$(AssemblyName).nuspec</FinalizedNuspecFile>

        <!-- Project path -->
        <NugetProjectPath>$(SolutionDir)\$(RootNamespace)</NugetProjectPath>

        <!-- Commands -->
        <RestoreCommand>$(NuGetCommand) install "$(PackagesConfig)" -source "$(PackageSources)"  $(NonInteractiveSwitch) $(RequireConsentSwitch) -solutionDir $(PaddedSolutionDir)</RestoreCommand>

        <!-- We need to ensure packages are restored prior to assembly resolve -->
        <BuildDependsOn Condition="$(RestorePackages) == 'true'">
            RestorePackages;
            $(BuildDependsOn);
        </BuildDependsOn>

        <!-- Make the build depend on restore packages -->
        <BuildDependsOn Condition="$(BuildPackage) == 'true'">
            $(BuildDependsOn);
            BuildPackage;
        </BuildDependsOn>

        <BuildDependsOn Condition="$(PushPackages) == 'true'">
            $(BuildDependsOn);
            PushPackages;
        </BuildDependsOn>
    </PropertyGroup>

    <!-- Make sure clean will clean up .nuget/packages and .nuget/nuspec directories -->
    <PropertyGroup>
      <CleanDependsOn>$(CleanDependsOn);CleanNugetPackages</CleanDependsOn>
    </PropertyGroup>

    <Target Name="CheckPrerequisites">
        <!-- Raise an error if we're unable to locate nuget.exe  -->
        <Error Condition="'$(DownloadNuGetExe)' != 'true' AND !Exists('$(NuGetExePath)')" Text="Unable to locate '$(NuGetExePath)'" />
        <!--
        Take advantage of MsBuild's build dependency tracking to make sure that we only ever download nuget.exe once.
        This effectively acts as a lock that makes sure that the download operation will only happen once and all
        parallel builds will have to wait for it to complete.
        -->
        <MsBuild Targets="_DownloadNuGet" Projects="$(MSBuildThisFileFullPath)" Properties="Configuration=NOT_IMPORTANT;DownloadNuGetExe=$(DownloadNuGetExe)" />
        <MakeDir Directories="$(PackageOutputDir)" />
    </Target>

    <Target Name="_DownloadNuGet">
        <DownloadNuGet OutputFilename="$(NuGetExePath)" Condition=" '$(DownloadNuGetExe)' == 'true' AND !Exists('$(NuGetExePath)')" />
    </Target>

    <Target Name="RestorePackages" DependsOnTargets="CheckPrerequisites">        
        <Exec Command="$(RestoreCommand)"
              Condition="'$(OS)' != 'Windows_NT' And Exists('$(PackagesConfig)')" />

        <Exec Command="$(RestoreCommand)"
              LogStandardErrorAsError="true"
              Condition="'$(OS)' == 'Windows_NT' And Exists('$(PackagesConfig)')" />
    </Target>

    <Target Name="BuildPackage" DependsOnTargets="ExtractPOMVersion; CheckPrerequisites">
        <PropertyGroup>
            <BuildCommand>$(NuGetCommand) pack "$(FinalizedNuspecFile)" -BasePath $(NugetProjectPath) -Properties "Configuration=$(Configuration);Platform=$(Platform);REEF_Version=$(REEF_Version);Version=$(REEF_NugetVersion)" $(NonInteractiveSwitch) -OutputDirectory "$(PackageOutputDir)" </BuildCommand>
        </PropertyGroup>

        <Exec Command="$(BuildCommand)"
              Condition=" '$(OS)' != 'Windows_NT' " />

        <Exec Command="$(BuildCommand)"
              LogStandardErrorAsError="true"
              Condition=" '$(OS)' == 'Windows_NT' " />
    </Target>

    <Target Name="CleanNugetPackages">
        <Delete Files="$(SolutionDir2).nuget\packages\$(RootNamespace).$(REEF_NugetVersion).nupkg" />
    </Target>

    <Choose>
        <When Condition="'$(SolutionDir)'=='..'">
            <PropertyGroup>
                <SolutionDir2>..\</SolutionDir2>
            </PropertyGroup>
        </When>
        <Otherwise>
            <PropertyGroup>
                <SolutionDir2>$(SolutionDir)</SolutionDir2>
            </PropertyGroup>
        </Otherwise>
    </Choose>

    <Target Name="PushPackages" >
        <ItemGroup>
            <PackageFile Include="$(SolutionDir2).nuget\packages\$(RootNamespace).$(REEF_NugetVersion).nupkg" />
        </ItemGroup>

        <PropertyGroup>
            <PushCommand Condition="'$(NuGetApiKey)' == '' OR '$(NuGetApiKey)' == '*Undefined*'">$(NuGetCommand) push @(PackageFile) -Source $(NuGetRepository)</PushCommand>
            <PushCommand Condition="'$(NuGetApiKey)' != '' AND '$(NuGetApiKey)' != '*Undefined*'">$(NuGetCommand) push @(PackageFile) $(NuGetApiKey) -Source $(NuGetRepository)</PushCommand>

        </PropertyGroup>

        <Exec
            Condition="'$(BuildPackage)' == 'true'"
            Command="$(PushCommand)"
            LogStandardErrorAsError="true">
        </Exec>

    </Target>

    <UsingTask TaskName="DownloadNuGet" TaskFactory="CodeTaskFactory" AssemblyFile="$(MSBuildToolsPath)\Microsoft.Build.Tasks.v4.0.dll">
        <ParameterGroup>
            <OutputFilename ParameterType="System.String" Required="true" />
        </ParameterGroup>
        <Task>
            <Reference Include="System.Core" />
            <Using Namespace="System" />
            <Using Namespace="System.IO" />
            <Using Namespace="System.Net" />
            <Using Namespace="Microsoft.Build.Framework" />
            <Using Namespace="Microsoft.Build.Utilities" />
            <Code Type="Fragment" Language="cs">
                <![CDATA[
                try {
                    OutputFilename = Path.GetFullPath(OutputFilename);

                    Log.LogMessage("Downloading latest version of NuGet.exe...");
                    WebClient webClient = new WebClient();
                    webClient.DownloadFile("https://dist.nuget.org/win-x86-commandline/v4.1.0/nuget.exe", OutputFilename);

                    return true;
                }
                catch (Exception ex) {
                    Log.LogErrorFromException(ex);
                    return false;
                }
            ]]>
            </Code>
        </Task>
    </UsingTask>
</Project>