| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. See accompanying LICENSE file. |
| # |
| |
| import os |
| import sys |
| import urllib2 |
| import base64 |
| import httplib |
| import json |
| import time |
| from xml.etree import ElementTree as ET |
| import datetime |
| from subprocess import Popen, PIPE |
| import re |
| |
| |
| def port_ranger_installation_to_ambari(): |
| print('preparing advanged configurations for ranger') |
| flag_ranger_admin_present, ranger_admin_properties_from_file = get_ranger_admin_install_properties() |
| if flag_ranger_admin_present: |
| print('ranger admin service is installed, making configurations as required by ambari.') |
| if create_ranger_service_in_ambari(): |
| print('ranger service is added sucessfully in ambari') |
| if create_ranger_service_components_in_ambari('RANGER_ADMIN'): |
| print('ranger service component is added successfully in ambari') |
| if register_ranger_admin_host_in_ambari(): |
| print('ranger admin host is registered successfully in ambari') |
| if add_advanced_ranger_configurations(1, ranger_admin_properties_from_file): |
| print('ranger-admin advanced configurations added successfully in ambari, kindly run ranger-usersync to complete ranger service install') |
| else: |
| print('ranger advanced configurations added failed in ambari') |
| else: |
| print('ranger admin host registration failed in ambari') |
| else: |
| print('ranger service component add failed in ambari') |
| else: |
| print('ranger service add failed in ambari') |
| else: |
| print('ranger admin and usersync services are not installed, not importing configurations to ambari.') |
| |
| |
| def port_ranger_usersync_installation_to_ambari(): |
| print ('preparing configurations for ranger user-sync') |
| flag_ranger_usersync_present, ranger_usersync_properties_from_file = get_ranger_usersync_install_properties() |
| if flag_ranger_usersync_present: |
| print('ranger usersync service is installed, making configurations as required by ambari.') |
| if create_ranger_service_components_in_ambari('RANGER_USERSYNC'): |
| print('ranger service component is added successfully in ambari') |
| if register_ranger_usersync_host_in_ambari(): |
| print('ranger usersync host is registered successfully in ambari') |
| if add_advanced_ranger_configurations(2, ranger_usersync_properties_from_file): |
| print('ranger advanced configurations added successfully in ambari') |
| if call_ranger_installed(): |
| print('ranger service installed successfully in ambari.') |
| else: |
| print('ranger service install failed in ambari') |
| else: |
| print('ranger advanced configurations added failed in ambari') |
| else: |
| print('ranger usersync host registration failed in ambari') |
| else: |
| print('ranger service add failed in ambari') |
| else: |
| print('ranger admin and usersync services are not installed, not importing configurations to ambari.') |
| |
| |
| def create_ranger_service_in_ambari(): |
| print('creating ranger service in ambari') |
| ranger_create_url = ambari_service_url + '/' + ranger_service_name |
| request_result = call_ambari_api(ranger_create_url, 'POST', ambari_username_password, '') |
| if request_result is not None: |
| response_code = request_result.getcode() |
| response = json.loads(json.JSONEncoder().encode(request_result.read())) |
| if (response_code == 201 and response is not None): |
| print('ranger service created successfully in ambari.') |
| return True |
| elif (response_code == 409 and response is not None): |
| print('ranger service is already created in ambari.') |
| return True |
| else: |
| print('ranger service creation failed in ambari.') |
| return False |
| |
| def create_ranger_service_components_in_ambari(ranger_service_component_name): |
| print('adding ranger servcie components in ambari') |
| ranger_service_components = '{"components":[{"ServiceComponentInfo":{"component_name":"' + ranger_service_component_name + '"}}]}' |
| print('creating ranger service in ambari') |
| ranger_service_component_create_url = ambari_service_url + '?ServiceInfo/service_name=' + ranger_service_name |
| request_result = call_ambari_api(ranger_service_component_create_url, 'POST', ambari_username_password, ranger_service_components) |
| if request_result is not None: |
| response_code = request_result.getcode() |
| response = json.loads(json.JSONEncoder().encode(request_result.read())) |
| if (response_code == 201 and response is not None): |
| print('ranger service component : ' + ranger_service_component_name + ', created successfully in ambari.') |
| return True |
| elif (response_code == 409 and response is not None): |
| print('ranger service component : ' + ranger_service_component_name + ', is already present in ambari.') |
| return True |
| else: |
| print('ranger service component creation for : ' + ranger_service_component_name + ', failed in ambari.') |
| return False |
| |
| def register_ranger_admin_host_in_ambari(): |
| print('adding ranger servcie components in ambari') |
| print('creating ranger admin service in ambari') |
| ranger_service_component_create_url = ambari_cluster_url + '/hosts/' + ranger_admin_fqdn + '/host_components/' + admin_component_name |
| request_result = call_ambari_api(ranger_service_component_create_url, 'POST', ambari_username_password, '') |
| if request_result is not None: |
| response_code = request_result.getcode() |
| response = json.loads(json.JSONEncoder().encode(request_result.read())) |
| if response_code == 201 and response is not None: |
| print('ranger admin host registered successfully in ambari.') |
| return True |
| elif (response_code == 409 and response is not None): |
| print('ranger admin host is already registered ambari.') |
| return True |
| else: |
| print('ranger admin host registration failed in ambari.') |
| return False |
| |
| |
| def register_ranger_usersync_host_in_ambari(): |
| print('adding ranger servcie components in ambari') |
| print('creating ranger admin service in ambari') |
| ranger_host_register_url = ambari_cluster_url + '/hosts/' + ranger_admin_fqdn + '/host_components/' + usersync_component_name |
| request_result = call_ambari_api(ranger_host_register_url, 'POST', ambari_username_password, '') |
| if request_result is not None: |
| response_code = request_result.getcode() |
| response = json.loads(json.JSONEncoder().encode(request_result.read())) |
| if (response_code == 201 and response is not None): |
| print('ranger usersync host registered successfully in ambari.') |
| return True |
| elif (response_code == 409 and response is not None): |
| print('ranger usersync host is already registered ambari.') |
| return True |
| else: |
| print('ranger usersync host registration failed in ambari.') |
| return False |
| |
| |
| def add_advanced_ranger_configurations(add_admin_or_usersync, ranger_service_properties_from_file): |
| print('creating advanced configurations to be added to ambari.') |
| ranger_config_data = '' |
| advanced_admin_properties = dict() |
| advanced_ranger_site_properties = dict() |
| advanced_ranger_env_properties = dict() |
| advanced_user_sync_properties = dict() |
| date_time_stamp = getDateTimeNow() |
| |
| if (add_admin_or_usersync == 1): |
| if not ((str(ranger_service_properties_from_file['db_root_password']).strip() == '') or |
| (str(ranger_service_properties_from_file['db_root_user']).strip() == '' )) : |
| advanced_admin_properties['DB_FLAVOR'] = ranger_service_properties_from_file['DB_FLAVOR'] |
| advanced_admin_properties['SQL_COMMAND_INVOKER'] = ranger_service_properties_from_file['SQL_COMMAND_INVOKER'] |
| advanced_admin_properties['SQL_CONNECTOR_JAR'] = ranger_service_properties_from_file['SQL_CONNECTOR_JAR'] |
| advanced_admin_properties['db_root_user'] = ranger_service_properties_from_file['db_root_user'] |
| advanced_admin_properties['db_root_password'] = ranger_service_properties_from_file['db_root_password'] |
| advanced_admin_properties['db_host'] = ranger_service_properties_from_file['db_host'] |
| advanced_admin_properties['db_name'] = ranger_service_properties_from_file['db_name'] |
| advanced_admin_properties['db_user'] = ranger_service_properties_from_file['jdbc.user'] |
| advanced_admin_properties['db_password'] = ranger_service_properties_from_file['jdbc.password'] |
| advanced_admin_properties['audit_db_name'] = ranger_service_properties_from_file['audit_db_name'] |
| advanced_admin_properties['audit_db_user'] = ranger_service_properties_from_file['auditDB.jdbc.user'] |
| advanced_admin_properties['audit_db_password'] = ranger_service_properties_from_file['auditDB.jdbc.password'] |
| advanced_admin_properties['policymgr_external_url'] = ranger_service_properties_from_file['xa.webapp.url.root'] |
| advanced_admin_properties['policymgr_http_enabled'] = ranger_service_properties_from_file['http.enabled'] |
| advanced_admin_properties['authentication_method'] = get_authentication_method() |
| advanced_admin_properties['remoteLoginEnabled'] = ranger_service_properties_from_file.get('remoteLoginEnabled','false') |
| advanced_admin_properties['authServiceHostName'] = ranger_service_properties_from_file.get('authServiceHostName','localhost') |
| advanced_admin_properties['authServicePort'] = ranger_service_properties_from_file.get('authServicePort','5151') |
| advanced_admin_properties['xa_ldap_url'] = ranger_service_properties_from_file['xa_ldap_url'] |
| advanced_admin_properties['xa_ldap_userDNpattern'] = ranger_service_properties_from_file['xa_ldap_userDNpattern'] |
| advanced_admin_properties['xa_ldap_groupSearchBase'] = ranger_service_properties_from_file['xa_ldap_groupSearchBase'] |
| advanced_admin_properties['xa_ldap_groupSearchFilter'] = ranger_service_properties_from_file['xa_ldap_groupSearchFilter'] |
| advanced_admin_properties['xa_ldap_groupRoleAttribute'] = ranger_service_properties_from_file['xa_ldap_groupRoleAttribute'] |
| advanced_admin_properties['xa_ldap_ad_domain'] = ranger_service_properties_from_file['xa_ldap_ad_domain'] |
| advanced_admin_properties['xa_ldap_ad_url'] = ranger_service_properties_from_file['xa_ldap_ad_url'] |
| |
| advanced_ranger_site_properties['HTTP_SERVICE_PORT'] = ranger_service_properties_from_file['http.service.port'] |
| advanced_ranger_site_properties['HTTPS_SERVICE_PORT'] = ranger_service_properties_from_file['https.service.port'] |
| advanced_ranger_site_properties['HTTPS_KEYSTORE_FILE'] = ranger_service_properties_from_file['https.attrib.keystoreFile'] |
| advanced_ranger_site_properties['HTTPS_KEYSTORE_PASS'] = ranger_service_properties_from_file['https.attrib.keystorePass'] |
| advanced_ranger_site_properties['HTTPS_KEY_ALIAS'] = ranger_service_properties_from_file['https.attrib.keyAlias'] |
| advanced_ranger_site_properties['HTTPS_CLIENT_AUTH'] = ranger_service_properties_from_file['https.attrib.clientAuth'] |
| advanced_ranger_site_properties['HTTP_ENABLED'] = ranger_service_properties_from_file['http.enabled'] |
| |
| advanced_ranger_env_properties['ranger_user'] = 'ranger' |
| advanced_ranger_env_properties['ranger_group'] = 'ranger' |
| advanced_ranger_env_properties['ranger_admin_log_dir'] = '/var/log/ranger/admin' |
| advanced_ranger_env_properties['ranger_usersync_log_dir'] = '/var/log/ranger/usersync' |
| advanced_ranger_env_properties['ranger_admin_username'] = 'amb_ranger_admin' |
| advanced_ranger_env_properties['ranger_admin_password'] = 'ambari123' |
| advanced_ranger_env_properties['admin_password'] = 'admin' |
| |
| ranger_config_data = '[{"Clusters":{"desired_config":[{"type":"admin-properties", "service_config_version_note": "Initial configuration for Ranger Admin service" ,"tag":"' + str( |
| date_time_stamp) + '","properties":' + json.dumps( |
| advanced_admin_properties) + ', "properties_attributes": {"final": "true"}},{"type":"ranger-site", "service_config_version_note": "Initial configuration for Ranger Admin service" ,"tag":"' + str( |
| date_time_stamp) + '","properties":' + json.dumps( |
| advanced_ranger_site_properties) + ', "properties_attributes": {"final": "false"}},{"type":"ranger-env", "service_config_version_note": "Initial configuration for Ranger Admin service" ,"tag":"' + str( |
| date_time_stamp) + '","properties":' + json.dumps(advanced_ranger_env_properties) + ', "properties_attributes": {"final": "false"}}]}}]' |
| |
| |
| print ('####################### admin_properties configuration :') |
| for each_key in advanced_admin_properties: |
| print str(each_key) + ' = ' + str(advanced_admin_properties[each_key]) |
| |
| print ('####################### ranger_site_properties configuration :') |
| for each_key in advanced_ranger_site_properties: |
| print str(each_key) + ' = ' + str(advanced_ranger_site_properties[each_key]) |
| |
| print ('####################### ranger_env_properties configuration :') |
| for each_key in advanced_ranger_env_properties: |
| print str(each_key) + ' = ' + str(advanced_ranger_env_properties[each_key]) |
| |
| |
| else: |
| print('either db_root_user or db_root_password value is missing from ranger_admin_install.properties file, please set appropriate value and run the script again.') |
| sys.exit(1) |
| |
| elif (add_admin_or_usersync == 2): |
| advanced_user_sync_properties['SYNC_SOURCE'] = ranger_service_properties_from_file['SYNC_SOURCE'] |
| advanced_user_sync_properties['MIN_UNIX_USER_ID_TO_SYNC'] = ranger_service_properties_from_file['usergroupSync.unix.minUserId'] |
| advanced_user_sync_properties['SYNC_INTERVAL'] = ranger_service_properties_from_file['usergroupSync.sleepTimeInMillisBetweenSyncCycle'] |
| advanced_user_sync_properties['SYNC_LDAP_URL'] = ranger_service_properties_from_file['ldapGroupSync.ldapUrl'] \ |
| if str(ranger_service_properties_from_file['SYNC_SOURCE']).strip().lower() == 'ldap' else ' ' |
| advanced_user_sync_properties['SYNC_LDAP_BIND_DN'] = ranger_service_properties_from_file['ldapGroupSync.ldapBindDn'] \ |
| if str(ranger_service_properties_from_file['SYNC_SOURCE']).strip().lower() == 'ldap' else ' ' |
| advanced_user_sync_properties['SYNC_LDAP_BIND_PASSWORD'] = ranger_service_properties_from_file['ldapGroupSync.ldapBindPassword'] \ |
| if str(ranger_service_properties_from_file['SYNC_SOURCE']).strip().lower() == 'ldap' else ' ' |
| advanced_user_sync_properties['CRED_KEYSTORE_FILENAME'] = ranger_service_properties_from_file['ldapGroupSync.ldapBindKeystore'] |
| advanced_user_sync_properties['SYNC_LDAP_USER_SEARCH_BASE'] = ranger_service_properties_from_file['ldapGroupSync.userSearchBase'] \ |
| if str(ranger_service_properties_from_file['SYNC_SOURCE']).strip().lower() == 'ldap' else ' ' |
| advanced_user_sync_properties['SYNC_LDAP_USER_SEARCH_SCOPE'] = ranger_service_properties_from_file['ldapGroupSync.userSearchScope'] |
| advanced_user_sync_properties['SYNC_LDAP_USER_OBJECT_CLASS'] = ranger_service_properties_from_file['ldapGroupSync.userObjectClass'] |
| advanced_user_sync_properties['SYNC_LDAP_USER_SEARCH_FILTER'] = ranger_service_properties_from_file['ldapGroupSync.userSearchFilter'] \ |
| if str(ranger_service_properties_from_file['SYNC_SOURCE']).strip().lower() == 'ldap' else ' ' |
| advanced_user_sync_properties['SYNC_LDAP_USER_NAME_ATTRIBUTE'] = ranger_service_properties_from_file['ldapGroupSync.userNameAttribute'] |
| advanced_user_sync_properties['SYNC_LDAP_USER_GROUP_NAME_ATTRIBUTE'] = ranger_service_properties_from_file['ldapGroupSync.userGroupNameAttribute'] |
| advanced_user_sync_properties['SYNC_LDAP_USERNAME_CASE_CONVERSION'] = ranger_service_properties_from_file['ldapGroupSync.username.caseConversion'] |
| advanced_user_sync_properties['SYNC_LDAP_GROUPNAME_CASE_CONVERSION'] = ranger_service_properties_from_file['ldapGroupSync.groupname.caseConversion'] |
| advanced_user_sync_properties['logdir'] = ranger_service_properties_from_file['logdir'] |
| |
| ranger_config_data = '[{"Clusters":{"desired_config":[{"type":"usersync-properties", "service_config_version_note": "Initial configuration for Ranger Usersync service" ,"tag":"' + str( |
| date_time_stamp) + '","properties":' + json.dumps(advanced_user_sync_properties) + ', "properties_attributes": {"final": "false"}}]}}]' |
| |
| print ('####################### user_sync_properties configuration :') |
| for each_key in advanced_user_sync_properties: |
| print str(each_key) + ' = ' + str(advanced_user_sync_properties[each_key]) |
| |
| else: |
| print ('invalid option for to add configuration to ranger.') |
| sys.exit(1) |
| |
| |
| confirm_configurations = raw_input('please confirm the above configuration values y/n (n) : ') |
| if(confirm_configurations == ''): |
| confirm_configurations = 'n' |
| print ('input registered as ' + str(confirm_configurations)) |
| |
| if(confirm_configurations.lower() == 'y'): |
| ranger_config_request_url = ambari_cluster_url |
| request_result = call_ambari_api(ranger_config_request_url, 'PUT', ambari_username_password, str(ranger_config_data)) |
| if request_result is not None: |
| response_code = request_result.getcode() |
| response = json.loads(json.JSONEncoder().encode(request_result.read())) |
| if response_code == 200 and response is not None: |
| print('ranger advanced configuration added successfully in ambari.') |
| return True |
| else: |
| print('ranger advanced configuration add failed in ambari.') |
| return False |
| else: |
| print('ranger advanced configuration add failed in ambari.') |
| return False |
| else: |
| print ('exiting installation without configuration !') |
| sys.exit(0) |
| |
| |
| def call_ranger_installed(): |
| print('changing state of ranger services from init to installed.') |
| ranger_state_change_request = '{"RequestInfo":{"context":"Install Ranger Service","operation_level":{"level":"CLUSTER","cluster_name":"' + str( |
| cluster_name) + '"}},"Body":{"ServiceInfo":{"state":"INSTALLED"}}}' |
| ranger_state_change_url = ambari_service_url + '?ServiceInfo/state=INIT' |
| request_result = call_ambari_api(ranger_state_change_url, 'PUT', ambari_username_password, ranger_state_change_request) |
| if request_result is not None: |
| response_code = request_result.getcode() |
| response = json.loads(json.JSONEncoder().encode(request_result.read())) |
| if (response_code == 200 and response is not None): |
| print('ranger state changed to install successfully in ambari.') |
| return True |
| if (response_code == 409 and response is not None): |
| print('ranger is already installed in ambari.') |
| return True |
| if response_code == 202 and response is not None: |
| print('ranger state changed to install posted in ambari, checking for updated status waiting for 30 seconds') |
| parsed_response = json.loads(response) |
| response_href_url = parsed_response['href'] |
| response_request_id = parsed_response['Requests']['id'] |
| response_status = parsed_response['Requests']['status'] |
| if response_status != 'Installed': |
| print('Received response but status is not installed, verifying installation to be successful.') |
| flag_ranger_installed = True |
| time.sleep(30) |
| while flag_ranger_installed: |
| print('checking request status') |
| ambari_request_url = ambari_cluster_url + '/requests/' + str(response_request_id) |
| request_status_result = call_ambari_api(ambari_request_url, 'GET', ambari_username_password, '') |
| if request_status_result is not None: |
| response_code = request_status_result.getcode() |
| response_status = json.loads(json.JSONEncoder().encode(request_status_result.read())) |
| if (response_code == 200 and 'FAILED' in response_status): |
| print('ranger install failed in ambari.') |
| flag_ranger_installed = True |
| if (response_code == 200 ): |
| print('ranger install is pending in ambari.') |
| flag_ranger_installed = True |
| if (response_code == 200 and ('PENDING' in response_status or 'INTERNAL_REQUEST' in response_status)): |
| print('ranger install is pending in ambari.') |
| flag_ranger_installed = True |
| if (response_code == 200 and 'COMPLETED' in response_status): |
| print('ranger installed successfully in ambari.') |
| flag_ranger_installed = False |
| else: |
| flag_ranger_installed = True |
| return not flag_ranger_installed |
| else: |
| print('ranger state changed to install failed in ambari.') |
| return False |
| |
| |
| def get_ranger_usersync_install_properties(): |
| print('preparing advanced configurations for ranger User-sync') |
| flag_hadoop_present = check_hadoop_dir_present(hdp_current_dir) |
| flag_ranger_usersync_present = False |
| ranger_usersync_current_dir = os.path.join(hdp_current_dir, 'ranger-usersync') |
| ranger_usersync_properties_from_file = dict() |
| print('checking for ranger-usersync service to be present') |
| flag_ranger_usersync_present, ranger_usersync__installed_version = check_ranger_usersync_install(ranger_usersync_current_dir) |
| if flag_ranger_usersync_present: |
| print('ranger usersync is installed, getting existing properties for ambari import') |
| print('got ranger usersync values from install.properties file, need to configure ambari for ranger service.') |
| ranger_usersync_properties_from_file = get_additional_properties_for_usersync(ranger_usersync_properties_from_file) |
| return flag_ranger_usersync_present, ranger_usersync_properties_from_file |
| |
| |
| def get_ranger_admin_install_properties(): |
| ranger_admin_current_dir = os.path.join(hdp_current_dir, 'ranger-admin') |
| flag_hadoop_present = check_hadoop_dir_present(hdp_current_dir) |
| flag_ranger_admin_present = False |
| ranger_admin_properties_from_file = dict() |
| |
| if flag_hadoop_present: |
| print('hadoop directory is present, checking ranger admin installation.') |
| flag_ranger_admin_present, ranger_admin_installed_version = check_ranger_admin_install(ranger_admin_current_dir) |
| |
| if flag_ranger_admin_present: |
| print('ranger admin is present.getting existing configurations to port to ambari.') |
| if os.path.isfile("ranger_admin_install.properties"): |
| print('ranger_install_properties_path exists, getting existing properties for ambari port') |
| ranger_admin_properties_from_file = import_properties_from_file("ranger_admin_install.properties") |
| if not (ranger_admin_properties_from_file['db_root_user'] == '' or ranger_admin_properties_from_file['db_root_password'] == ''): |
| print 'db_root_username and db_root_password are not blank.' |
| print 'value for db_root_user = ' + str(ranger_admin_properties_from_file['db_root_user']) |
| print 'value for db_root_password = ' + str(ranger_admin_properties_from_file['db_root_password']) |
| else: |
| print 'db_root_username or db_root_password are blank, please provide proper values in ranger_admin_install.properties. exiting installation without any changes.' |
| sys.exit(1) |
| |
| print('got ranger admin values from ranger_admin_install.properties file, need to configure ambari for ranger service.') |
| print('getting additional properties required by ranger services') |
| ranger_admin_properties_from_file = get_additional_properties_for_admin(ranger_admin_properties_from_file) |
| |
| return flag_ranger_admin_present, ranger_admin_properties_from_file |
| |
| |
| def check_hadoop_dir_present(hdp_current_dir_path): |
| flag_hadoop_dir_present = False |
| if os.path.isdir(hdp_current_dir_path): |
| print('hadoop is installed.') |
| flag_hadoop_dir_present = True |
| return flag_hadoop_dir_present |
| |
| |
| def check_ranger_admin_install(ranger_admin_current_dir): |
| flag_ranger_dir_present = False |
| ranger_current_installed_version = '' |
| print('checking ranger service path folder') |
| if os.path.isdir(ranger_admin_current_dir): |
| print('ranger admin is installed.') |
| if os.path.islink(ranger_admin_current_dir): |
| flag_ranger_dir_present = True |
| print('ranger admin link found getting current version from link.') |
| ranger_home_path = os.path.realpath(ranger_admin_current_dir) |
| ranger_current_installed_version = ranger_home_path.split('/')[4] |
| return flag_ranger_dir_present, ranger_current_installed_version |
| |
| |
| def check_ranger_usersync_install(ranger_usersync_current_dir): |
| flag_ranger_dir_present = False |
| ranger_current_installed_version = '' |
| print('checking ranger service path folder') |
| if os.path.isdir(ranger_usersync_current_dir): |
| print('ranger user-sync is installed.') |
| if os.path.islink(ranger_usersync_current_dir): |
| flag_ranger_dir_present = True |
| print('ranger admin link found getting current version from link.') |
| ranger_home_path = os.path.realpath(ranger_usersync_current_dir) |
| ranger_current_installed_version = ranger_home_path.split('/')[4] |
| return flag_ranger_dir_present, ranger_current_installed_version |
| |
| |
| def get_additional_properties_for_admin(ranger_admin_properties_from_file): |
| ranger_conf_path = '/etc/ranger/admin/conf' |
| ranger_webserver_properties_path = os.path.join(ranger_conf_path, 'ranger_webserver.properties') |
| ranger_ldap_properties_path = os.path.join(ranger_conf_path, 'xa_ldap.properties') |
| ranger_system_properties_path = os.path.join(ranger_conf_path, 'xa_system.properties') |
| ranger_unixauth_properties_path = os.path.join(ranger_conf_path, 'ranger_jaas', 'unixauth.properties') |
| try: |
| ranger_admin_properties_from_file = import_properties_from_file(ranger_webserver_properties_path, ranger_admin_properties_from_file) |
| ranger_admin_properties_from_file = import_properties_from_file(ranger_ldap_properties_path, ranger_admin_properties_from_file) |
| ranger_admin_properties_from_file = import_properties_from_file(ranger_system_properties_path, ranger_admin_properties_from_file) |
| ranger_admin_properties_from_file = import_properties_from_file(ranger_unixauth_properties_path, ranger_admin_properties_from_file) |
| except Exception, e: |
| print "Error loading property files: ", str(e) |
| |
| print('getting db flavor, library and command invoker') |
| xa_system_properties_db_dialect = ranger_admin_properties_from_file['jdbc.dialect'] |
| print('xa_system_properties_db_dialect = ' + xa_system_properties_db_dialect) |
| xa_system_properties_url = ranger_admin_properties_from_file['jdbc.url'] |
| print('xa_system_properties_url = ' + xa_system_properties_url) |
| if ('mysql'.lower() in xa_system_properties_db_dialect.lower() and 'mysql'.lower() in xa_system_properties_url.lower()): |
| print('db dialect and jdbc url are set as MYSQL setting db_flavour and sql command invoker as mysql') |
| ranger_admin_properties_from_file['DB_FLAVOR'] = 'MYSQL' |
| ranger_admin_properties_from_file['SQL_COMMAND_INVOKER'] = 'mysql' |
| ranger_admin_properties_from_file['SQL_CONNECTOR_JAR'] = '/usr/share/java/mysql-connector-java.jar' |
| elif ('oracle'.lower() in xa_system_properties_db_dialect and 'oracle'.lower() in xa_system_properties_url.lower()): |
| print('db dialect and jdbc url are set as Oracle setting db_flavour and sql command invoker as oracle') |
| ranger_admin_properties_from_file['DB_FLAVOR'] = 'ORACLE' |
| ranger_admin_properties_from_file['SQL_COMMAND_INVOKER'] = 'sqlplus' |
| ranger_admin_properties_from_file['SQL_CONNECTOR_JAR'] = '/usr/share/java/ojdbc6.jar' |
| else: |
| print('found unsupported DB_FLAVOUR, please configure as MYSQL or ORACLE, which are supported for now.exitting for now') |
| sys.exit(1) |
| |
| xa_system_properties_jdbc_url = ranger_admin_properties_from_file['jdbc.url'] |
| print('found jdbc url configured as : ' + str(xa_system_properties_jdbc_url) + ' , getting db host from configured jdbc url') |
| xa_database_host_name = xa_system_properties_jdbc_url.split(':') |
| xa_database_host = xa_database_host_name[3].split('/')[2] |
| xa_database_name = xa_database_host_name[3].split('/')[3] |
| print('found db host as : ' + str(xa_database_host)) |
| print('found db name as : ' + str(xa_database_name)) |
| ranger_admin_properties_from_file['db_host'] = xa_database_host |
| ranger_admin_properties_from_file['db_name'] = xa_database_name |
| |
| xa_system_properties_audit_jdbc_url = ranger_admin_properties_from_file['auditDB.jdbc.url'] |
| print('found audit jdbc url configured as : ' + str(xa_system_properties_audit_jdbc_url) + ' , getting db host from configured jdbc url') |
| xa_audit_database_host_name = xa_system_properties_audit_jdbc_url.split(':') |
| |
| xa_audit_database_host = xa_audit_database_host_name[3].split('/')[2] |
| xa_audit_database_name = xa_audit_database_host_name[3].split('/')[3] |
| print('found xa_audit_database_name as : ' + str(xa_audit_database_name)) |
| ranger_admin_properties_from_file['audit_db_host'] = xa_audit_database_host |
| ranger_admin_properties_from_file['audit_db_name'] = xa_audit_database_name |
| |
| xa_db_password = '' |
| xa_audit_db_password = '' |
| |
| libpath = os.path.join(hdp_version_dir, 'ranger-admin', 'cred', 'lib', '*') |
| aliasKey = 'policydb.jdbc.password' |
| aliasValue = '' |
| filepath = os.path.join(hdp_version_dir, 'ranger-admin', 'ews', 'webapp', 'WEB-INF', 'classes', 'conf', '.jceks', 'rangeradmin.jceks') |
| |
| getorcreateorlist = 'get' |
| |
| statuscode, value = call_keystore(libpath, aliasKey, aliasValue, filepath, getorcreateorlist) |
| if statuscode == 0: |
| xa_db_password = value.strip() |
| |
| aliasKey = 'auditdb.jdbc.password' |
| statuscode, value = call_keystore(libpath, aliasKey, aliasValue, filepath, getorcreateorlist) |
| if statuscode == 0: |
| xa_audit_db_password = value.strip() |
| |
| ranger_admin_properties_from_file['jdbc.password'] = xa_db_password |
| ranger_admin_properties_from_file['auditDB.jdbc.password'] = xa_audit_db_password |
| return ranger_admin_properties_from_file |
| |
| |
| def get_additional_properties_for_usersync(ranger_usersync_properties_from_file): |
| ranger_conf_path = '/etc/ranger/usersync/conf' |
| unix_auth_properties_path = os.path.join(ranger_conf_path, 'unixauthservice.properties') |
| ranger_usersync_properties_from_file = import_properties_from_file(unix_auth_properties_path, ranger_usersync_properties_from_file) |
| if (('unix'.lower()) in str(ranger_usersync_properties_from_file['usergroupSync.source.impl.class']).lower()): |
| print('sync_source is unix') |
| ranger_usersync_properties_from_file['SYNC_SOURCE'] = 'unix' |
| if (('ldap'.lower()) in str(ranger_usersync_properties_from_file['usergroupSync.source.impl.class']).lower()): |
| print('sync source is ldap') |
| ranger_usersync_properties_from_file['SYNC_SOURCE'] = 'ldap' |
| return ranger_usersync_properties_from_file |
| |
| |
| def port_ranger_hdfs_plugin_to_ambari(): |
| print('Trying to add ranger hdfs plugin.') |
| flag_hdfs_plugin_installed, hdfs_plugin_install_properties, hdfs_site_xml_properties = get_hdfs_plugin_configuration() |
| if flag_hdfs_plugin_installed and hdfs_plugin_install_properties is not None and hdfs_site_xml_properties is not None: |
| hdfs_site_xml_properties['dfs.permissions.enabled'] = 'true' |
| print('hdfs plugin is installed and enabled, adding to configurations') |
| advanced_ranger_hdfs_plugin_properties = dict() |
| |
| advanced_ranger_hdfs_plugin_properties['policy_user'] = 'ambari-qa' |
| advanced_ranger_hdfs_plugin_properties['hadoop.rpc.protection'] = '-' |
| advanced_ranger_hdfs_plugin_properties['common.name.for.certificate'] = '-' |
| advanced_ranger_hdfs_plugin_properties['ranger-hdfs-plugin-enabled'] = 'Yes' |
| advanced_ranger_hdfs_plugin_properties['REPOSITORY_CONFIG_USERNAME'] = 'hadoop' |
| advanced_ranger_hdfs_plugin_properties['REPOSITORY_CONFIG_PASSWORD'] = 'hadoop' |
| advanced_ranger_hdfs_plugin_properties['XAAUDIT.DB.IS_ENABLED'] = hdfs_plugin_install_properties['xasecure.audit.db.is.enabled'] |
| advanced_ranger_hdfs_plugin_properties['XAAUDIT.HDFS.IS_ENABLED'] = hdfs_plugin_install_properties['xasecure.audit.hdfs.is.enabled'] |
| advanced_ranger_hdfs_plugin_properties['XAAUDIT.HDFS.DESTINATION_DIRECTORY'] = hdfs_plugin_install_properties['xasecure.audit.hdfs.config.destination.directory'] |
| advanced_ranger_hdfs_plugin_properties['XAAUDIT.HDFS.LOCAL_BUFFER_DIRECTORY'] = hdfs_plugin_install_properties['xasecure.audit.hdfs.config.local.buffer.directory'] |
| advanced_ranger_hdfs_plugin_properties['XAAUDIT.HDFS.LOCAL_ARCHIVE_DIRECTORY'] = hdfs_plugin_install_properties['xasecure.audit.hdfs.config.local.archive.directory'] |
| advanced_ranger_hdfs_plugin_properties['XAAUDIT.HDFS.DESTINTATION_FILE'] = hdfs_plugin_install_properties['xasecure.audit.hdfs.config.destination.file'] |
| advanced_ranger_hdfs_plugin_properties['XAAUDIT.HDFS.DESTINTATION_FLUSH_INTERVAL_SECONDS'] = hdfs_plugin_install_properties['xasecure.audit.hdfs.config.destination.flush.interval.seconds'] |
| advanced_ranger_hdfs_plugin_properties['XAAUDIT.HDFS.DESTINTATION_ROLLOVER_INTERVAL_SECONDS'] = hdfs_plugin_install_properties[ |
| 'xasecure.audit.hdfs.config.destination.rollover.interval.seconds'] |
| advanced_ranger_hdfs_plugin_properties['XAAUDIT.HDFS.DESTINTATION_OPEN_RETRY_INTERVAL_SECONDS'] = hdfs_plugin_install_properties[ |
| 'xasecure.audit.hdfs.config.destination.open.retry.interval.seconds'] |
| advanced_ranger_hdfs_plugin_properties['XAAUDIT.HDFS.LOCAL_BUFFER_FILE'] = hdfs_plugin_install_properties['xasecure.audit.hdfs.config.local.buffer.file'] |
| advanced_ranger_hdfs_plugin_properties['XAAUDIT.HDFS.LOCAL_BUFFER_FLUSH_INTERVAL_SECONDS'] = hdfs_plugin_install_properties['xasecure.audit.hdfs.config.local.buffer.flush.interval.seconds'] |
| advanced_ranger_hdfs_plugin_properties['XAAUDIT.HDFS.LOCAL_BUFFER_ROLLOVER_INTERVAL_SECONDS'] = hdfs_plugin_install_properties[ |
| 'xasecure.audit.hdfs.config.local.buffer.rollover.interval.seconds'] |
| advanced_ranger_hdfs_plugin_properties['XAAUDIT.HDFS.LOCAL_ARCHIVE_MAX_FILE_COUNT'] = hdfs_plugin_install_properties['xasecure.audit.hdfs.config.local.archive.max.file.count'] |
| advanced_ranger_hdfs_plugin_properties['SSL_KEYSTORE_FILE_PATH'] = hdfs_plugin_install_properties['xasecure.policymgr.clientssl.keystore'] |
| advanced_ranger_hdfs_plugin_properties['SSL_TRUSTSTORE_FILE_PATH'] = hdfs_plugin_install_properties['xasecure.policymgr.clientssl.truststore'] |
| |
| date_time_stamp = getDateTimeNow() |
| plugin_configuration_data = '[{"Clusters":{"desired_config":[{"type":"hdfs-site", "service_config_version_note": "Initial configuration for Ranger HDFS plugin" ,"tag":"' + str(date_time_stamp) + '","properties":' + str( |
| json.dumps(hdfs_site_xml_properties)) + ', "properties_attributes": {"final": "false"}},{"type": "ranger-hdfs-plugin-properties", "service_config_version_note": "Initial configuration for Ranger HDFS plugin" , "tag": "' + str( |
| date_time_stamp) + '", "properties":' + json.dumps(advanced_ranger_hdfs_plugin_properties) + ',"properties_attributes": {"final": "false"}}]}}]' |
| |
| print ('####################### hdfs_site_xml configuration :') |
| for each_key in hdfs_site_xml_properties: |
| print str(each_key) + ' = ' + str(hdfs_site_xml_properties[each_key]) |
| |
| print ('####################### ranger_hdfs_plugin_properties configuration :') |
| for each_key in advanced_ranger_hdfs_plugin_properties: |
| print str(each_key) + ' = ' + str(advanced_ranger_hdfs_plugin_properties[each_key]) |
| |
| confirm_configurations = raw_input('please confirm the above configuration values y/n (n) : ') |
| if(confirm_configurations == ''): |
| confirm_configurations = 'n' |
| print ('Input registered as ' + str(confirm_configurations)) |
| |
| |
| if(confirm_configurations.lower() == 'y'): |
| ranger_config_request_url = ambari_cluster_url |
| request_result = call_ambari_api(ranger_config_request_url, 'PUT', ambari_username_password, str(plugin_configuration_data)) |
| if request_result is not None: |
| response_code = request_result.getcode() |
| response = json.loads(json.JSONEncoder().encode(request_result.read())) |
| if response_code == 200 and response is not None: |
| print('ranger hdfs plugin configuration added successfully in ambari.') |
| return True |
| else: |
| print('ranger hdfs plugin configuration add failed in ambari.') |
| return False |
| else: |
| print('ranger hdfs plugin configuration add failed in ambari.') |
| return False |
| else: |
| print ('exiting installation without configuration !') |
| sys.exit(0) |
| else: |
| print('ranger hdfs plugin configuration add failed in ambari.') |
| return False |
| |
| |
| |
| def port_ranger_hive_plugin_to_ambari(): |
| print('Trying to add ranger hive plugin.') |
| flag_hive_plugin_installed, hive_plugin_install_properties, hive_server2_xml_properties = get_hive_plugin_configuration() |
| if flag_hive_plugin_installed and hive_plugin_install_properties is not None and hive_server2_xml_properties is not None: |
| hive_server2_xml_properties['hive.security.authorization.enabled'] = 'true' |
| hive_server2_xml_properties['hive.security.authorization.manager'] = 'com.xasecure.authorization.hive.authorizer.XaSecureHiveAuthorizerFactory' |
| hive_server2_xml_properties['hive.security.authenticator.manager'] = 'org.apache.hadoop.hive.ql.security.SessionStateUserAuthenticator' |
| hive_server2_xml_properties['hive.conf.restricted.list'] = 'hive.security.authorization.enabled, hive.security.authorization.manager,hive.security.authenticator.manager' |
| print('hive plugin is installed and enabled, adding to configurations') |
| advanced_ranger_hive_plugin_properties = dict() |
| |
| advanced_ranger_hive_plugin_properties['policy_user'] = 'ambari-qa' |
| advanced_ranger_hive_plugin_properties['jdbc.driverClassName'] = 'org.apache.hive.jdbc.HiveDriver' |
| advanced_ranger_hive_plugin_properties['common.name.for.certificate'] = '-' |
| advanced_ranger_hive_plugin_properties['ranger-hive-plugin-enabled'] = 'Yes' |
| advanced_ranger_hive_plugin_properties['REPOSITORY_CONFIG_USERNAME'] = 'hive' |
| advanced_ranger_hive_plugin_properties['REPOSITORY_CONFIG_PASSWORD'] = 'hive' |
| advanced_ranger_hive_plugin_properties['XAAUDIT.DB.IS_ENABLED'] = hive_plugin_install_properties['xasecure.audit.db.is.enabled'] |
| advanced_ranger_hive_plugin_properties['XAAUDIT.HDFS.IS_ENABLED'] = hive_plugin_install_properties['xasecure.audit.hdfs.is.enabled'] |
| advanced_ranger_hive_plugin_properties['XAAUDIT.HDFS.DESTINATION_DIRECTORY'] = hive_plugin_install_properties['xasecure.audit.hdfs.config.destination.directory'] |
| advanced_ranger_hive_plugin_properties['XAAUDIT.HDFS.LOCAL_BUFFER_DIRECTORY'] = hive_plugin_install_properties['xasecure.audit.hdfs.config.local.buffer.directory'] |
| advanced_ranger_hive_plugin_properties['XAAUDIT.HDFS.LOCAL_ARCHIVE_DIRECTORY'] = hive_plugin_install_properties['xasecure.audit.hdfs.config.local.archive.directory'] |
| advanced_ranger_hive_plugin_properties['XAAUDIT.HDFS.DESTINTATION_FILE'] = hive_plugin_install_properties['xasecure.audit.hdfs.config.destination.file'] |
| advanced_ranger_hive_plugin_properties['XAAUDIT.HDFS.DESTINTATION_FLUSH_INTERVAL_SECONDS'] = hive_plugin_install_properties['xasecure.audit.hdfs.config.destination.flush.interval.seconds'] |
| advanced_ranger_hive_plugin_properties['XAAUDIT.HDFS.DESTINTATION_ROLLOVER_INTERVAL_SECONDS'] = hive_plugin_install_properties[ |
| 'xasecure.audit.hdfs.config.destination.rollover.interval.seconds'] |
| advanced_ranger_hive_plugin_properties['XAAUDIT.HDFS.DESTINTATION_OPEN_RETRY_INTERVAL_SECONDS'] = hive_plugin_install_properties[ |
| 'xasecure.audit.hdfs.config.destination.open.retry.interval.seconds'] |
| advanced_ranger_hive_plugin_properties['XAAUDIT.HDFS.LOCAL_BUFFER_FILE'] = hive_plugin_install_properties['xasecure.audit.hdfs.config.local.buffer.file'] |
| advanced_ranger_hive_plugin_properties['XAAUDIT.HDFS.LOCAL_BUFFER_FLUSH_INTERVAL_SECONDS'] = hive_plugin_install_properties['xasecure.audit.hdfs.config.local.buffer.flush.interval.seconds'] |
| advanced_ranger_hive_plugin_properties['XAAUDIT.HDFS.LOCAL_BUFFER_ROLLOVER_INTERVAL_SECONDS'] = hive_plugin_install_properties[ |
| 'xasecure.audit.hdfs.config.local.buffer.rollover.interval.seconds'] |
| advanced_ranger_hive_plugin_properties['XAAUDIT.HDFS.LOCAL_ARCHIVE_MAX_FILE_COUNT'] = hive_plugin_install_properties['xasecure.audit.hdfs.config.local.archive.max.file.count'] |
| advanced_ranger_hive_plugin_properties['SSL_KEYSTORE_FILE_PATH'] = hive_plugin_install_properties['xasecure.policymgr.clientssl.keystore'] |
| advanced_ranger_hive_plugin_properties['SSL_TRUSTSTORE_FILE_PATH'] = hive_plugin_install_properties['xasecure.policymgr.clientssl.truststore'] |
| advanced_ranger_hive_plugin_properties['UPDATE_XAPOLICIES_ON_GRANT_REVOKE'] = hive_plugin_install_properties['xasecure.hive.update.xapolicies.on.grant.revoke'] |
| |
| date_time_stamp = getDateTimeNow() |
| plugin_configuration_data = '[{"Clusters":{"desired_config":[{"type":"hiveserver2-site", "service_config_version_note": "Initial configuration for Ranger HIVE plugin" ,"tag":"' + str(date_time_stamp) + '","properties":' + str( |
| json.dumps(hive_server2_xml_properties)) + ', "properties_attributes": {"final": "false"}},{"type": "ranger-hive-plugin-properties", "service_config_version_note": "Initial configuration for Ranger HIVE plugin" ,"tag":"' + str( |
| date_time_stamp) + '", "properties":' + json.dumps(advanced_ranger_hive_plugin_properties) + ',"properties_attributes": {"final": "false"}}]}}]' |
| |
| |
| print ('####################### hive_server2_xml configuration :') |
| for each_key in hive_server2_xml_properties: |
| print str(each_key) + ' = ' + str(hive_server2_xml_properties[each_key]) |
| |
| print ('####################### ranger_hive_plugin_properties configuration :') |
| for each_key in advanced_ranger_hive_plugin_properties: |
| print str(each_key) + ' = ' + str(advanced_ranger_hive_plugin_properties[each_key]) |
| |
| confirm_configurations = raw_input('please confirm the above configuration values y/n (n) : ') |
| if(confirm_configurations == ''): |
| confirm_configurations = 'n' |
| print ('Input registered as ' + str(confirm_configurations)) |
| |
| |
| if(confirm_configurations.lower() == 'y'): |
| ranger_config_request_url = ambari_cluster_url |
| request_result = call_ambari_api(ranger_config_request_url, 'PUT', ambari_username_password, str(plugin_configuration_data)) |
| if request_result is not None: |
| response_code = request_result.getcode() |
| response = json.loads(json.JSONEncoder().encode(request_result.read())) |
| if response_code == 200 and response is not None: |
| print('ranger hive plugin configuration added successfully in ambari.') |
| return True |
| else: |
| print('ranger hive plugin configuration add failed in ambari.') |
| return False |
| else: |
| print('ranger hive plugin configuration add failed in ambari.') |
| return False |
| else: |
| print ('exiting installation without configuration !') |
| sys.exit(0) |
| else: |
| print('ranger hive plugin configuration add failed in ambari.') |
| return False |
| |
| |
| |
| def port_ranger_hbase_plugin_to_ambari(): |
| print('Trying to add ranger Hbase plugin.') |
| flag_hbase_plugin_installed, hbase_plugin_install_properties, hbase_site_xml_properties = get_hbase_plugin_configuration() |
| if flag_hbase_plugin_installed and hbase_plugin_install_properties is not None and hbase_site_xml_properties is not None: |
| print('Hbase plugin is installed and enabled, adding to configurations') |
| advanced_ranger_hbase_plugin_properties = dict() |
| |
| advanced_ranger_hbase_plugin_properties['policy_user'] = 'ambari-qa' |
| advanced_ranger_hbase_plugin_properties['common.name.for.certificate'] = '-' |
| advanced_ranger_hbase_plugin_properties['ranger-hbase-plugin-enabled'] = 'Yes' |
| advanced_ranger_hbase_plugin_properties['REPOSITORY_CONFIG_USERNAME'] = 'hbase' |
| advanced_ranger_hbase_plugin_properties['REPOSITORY_CONFIG_PASSWORD'] = 'hbase' |
| advanced_ranger_hbase_plugin_properties['XAAUDIT.DB.IS_ENABLED'] = hbase_plugin_install_properties['xasecure.audit.db.is.enabled'] |
| advanced_ranger_hbase_plugin_properties['XAAUDIT.HDFS.IS_ENABLED'] = hbase_plugin_install_properties['xasecure.audit.hdfs.is.enabled'] |
| advanced_ranger_hbase_plugin_properties['XAAUDIT.HDFS.DESTINATION_DIRECTORY'] = hbase_plugin_install_properties['xasecure.audit.hdfs.config.destination.directory'] |
| advanced_ranger_hbase_plugin_properties['XAAUDIT.HDFS.LOCAL_BUFFER_DIRECTORY'] = hbase_plugin_install_properties['xasecure.audit.hdfs.config.local.buffer.directory'] |
| advanced_ranger_hbase_plugin_properties['XAAUDIT.HDFS.LOCAL_ARCHIVE_DIRECTORY'] = hbase_plugin_install_properties['xasecure.audit.hdfs.config.local.archive.directory'] |
| advanced_ranger_hbase_plugin_properties['XAAUDIT.HDFS.DESTINTATION_FILE'] = hbase_plugin_install_properties['xasecure.audit.hdfs.config.destination.file'] |
| advanced_ranger_hbase_plugin_properties['XAAUDIT.HDFS.DESTINTATION_FLUSH_INTERVAL_SECONDS'] = hbase_plugin_install_properties['xasecure.audit.hdfs.config.destination.flush.interval.seconds'] |
| advanced_ranger_hbase_plugin_properties['XAAUDIT.HDFS.DESTINTATION_ROLLOVER_INTERVAL_SECONDS'] = hbase_plugin_install_properties[ |
| 'xasecure.audit.hdfs.config.destination.rollover.interval.seconds'] |
| advanced_ranger_hbase_plugin_properties['XAAUDIT.HDFS.DESTINTATION_OPEN_RETRY_INTERVAL_SECONDS'] = hbase_plugin_install_properties[ |
| 'xasecure.audit.hdfs.config.destination.open.retry.interval.seconds'] |
| advanced_ranger_hbase_plugin_properties['XAAUDIT.HDFS.LOCAL_BUFFER_FILE'] = hbase_plugin_install_properties['xasecure.audit.hdfs.config.local.buffer.file'] |
| advanced_ranger_hbase_plugin_properties['XAAUDIT.HDFS.LOCAL_BUFFER_FLUSH_INTERVAL_SECONDS'] = hbase_plugin_install_properties['xasecure.audit.hdfs.config.local.buffer.flush.interval.seconds'] |
| advanced_ranger_hbase_plugin_properties['XAAUDIT.HDFS.LOCAL_BUFFER_ROLLOVER_INTERVAL_SECONDS'] = hbase_plugin_install_properties[ |
| 'xasecure.audit.hdfs.config.local.buffer.rollover.interval.seconds'] |
| advanced_ranger_hbase_plugin_properties['XAAUDIT.HDFS.LOCAL_ARCHIVE_MAX_FILE_COUNT'] = hbase_plugin_install_properties['xasecure.audit.hdfs.config.local.archive.max.file.count'] |
| advanced_ranger_hbase_plugin_properties['SSL_KEYSTORE_FILE_PATH'] = hbase_plugin_install_properties['xasecure.policymgr.clientssl.keystore'] |
| advanced_ranger_hbase_plugin_properties['SSL_TRUSTSTORE_FILE_PATH'] = hbase_plugin_install_properties['xasecure.policymgr.clientssl.truststore'] |
| advanced_ranger_hbase_plugin_properties['UPDATE_XAPOLICIES_ON_GRANT_REVOKE'] = hbase_plugin_install_properties['xasecure.hbase.update.xapolicies.on.grant.revoke'] |
| |
| date_time_stamp = getDateTimeNow() |
| plugin_configuration_data = '[{"Clusters":{"desired_config":[{"type":"hbase-site", "service_config_version_note": "Initial configuration for Ranger HBASE plugin" ,"tag":"' + str(date_time_stamp) + '","properties":' + str( |
| json.dumps(hbase_site_xml_properties)) + ', "properties_attributes": {"final": "false"}},{"type": "ranger-hbase-plugin-properties","service_config_version_note": "Initial configuration for Ranger HBASE plugin" ,"tag":"' + str( |
| date_time_stamp) + '", "properties":' + json.dumps(advanced_ranger_hbase_plugin_properties) + ',"properties_attributes": {"final": "false"}}]}}]' |
| |
| print ('####################### hbase_site_xml configuration :') |
| for each_key in hbase_site_xml_properties: |
| print str(each_key) + ' = ' + str(hbase_site_xml_properties[each_key]) |
| |
| print ('####################### ranger_hbase_plugin_properties configuration :') |
| for each_key in advanced_ranger_hbase_plugin_properties: |
| print str(each_key) + ' = ' + str(advanced_ranger_hbase_plugin_properties[each_key]) |
| |
| confirm_configurations = raw_input('please confirm the above configuration values y/n (n) : ') |
| if(confirm_configurations == ''): |
| confirm_configurations = 'n' |
| print ('Input registered as ' + str(confirm_configurations)) |
| |
| |
| if(confirm_configurations.lower() == 'y'): |
| ranger_config_request_url = ambari_cluster_url |
| request_result = call_ambari_api(ranger_config_request_url, 'PUT', ambari_username_password, str(plugin_configuration_data)) |
| if request_result is not None: |
| response_code = request_result.getcode() |
| response = json.loads(json.JSONEncoder().encode(request_result.read())) |
| if response_code == 200 and response is not None: |
| print('ranger hbase plugin configuration added successfully in ambari.') |
| return True |
| else: |
| print('ranger hbase plugin configuration add failed in ambari.') |
| return False |
| else: |
| print ('ranger hbase plugin configuration add failed in ambari.') |
| return False |
| else: |
| print ('exiting installation without configuration !') |
| sys.exit(0) |
| else: |
| print ('ranger hbase plugin configuration add failed in ambari.') |
| return False |
| |
| |
| |
| def port_ranger_knox_plugin_to_ambari(): |
| print('trying to add ranger knox plugin.') |
| flag_knox_plugin_installed, knox_plugin_install_properties = get_knox_plugin_configuration() |
| if flag_knox_plugin_installed and knox_plugin_install_properties is not None: |
| print('Knox plugin is installed and enabled, adding to configurations') |
| advanced_ranger_knox_plugin_properties = dict() |
| |
| advanced_ranger_knox_plugin_properties['policy_user'] = 'ambari-qa' |
| advanced_ranger_knox_plugin_properties['common.name.for.certificate'] = '-' |
| advanced_ranger_knox_plugin_properties['ranger-knox-plugin-enabled'] = 'Yes' |
| advanced_ranger_knox_plugin_properties['REPOSITORY_CONFIG_USERNAME'] = 'admin' |
| advanced_ranger_knox_plugin_properties['REPOSITORY_CONFIG_PASSWORD'] = 'admin-password' |
| advanced_ranger_knox_plugin_properties['KNOX_HOME'] = '/usr/hdp/current/knox-server' |
| advanced_ranger_knox_plugin_properties['XAAUDIT.DB.IS_ENABLED'] = knox_plugin_install_properties['xasecure.audit.db.is.enabled'] |
| advanced_ranger_knox_plugin_properties['XAAUDIT.HDFS.IS_ENABLED'] = knox_plugin_install_properties['xasecure.audit.hdfs.is.enabled'] |
| advanced_ranger_knox_plugin_properties['XAAUDIT.HDFS.DESTINATION_DIRECTORY'] = knox_plugin_install_properties['xasecure.audit.hdfs.config.destination.directory'] |
| advanced_ranger_knox_plugin_properties['XAAUDIT.HDFS.LOCAL_BUFFER_DIRECTORY'] = knox_plugin_install_properties['xasecure.audit.hdfs.config.local.buffer.directory'] |
| advanced_ranger_knox_plugin_properties['XAAUDIT.HDFS.LOCAL_ARCHIVE_DIRECTORY'] = knox_plugin_install_properties['xasecure.audit.hdfs.config.local.archive.directory'] |
| advanced_ranger_knox_plugin_properties['XAAUDIT.HDFS.DESTINTATION_FILE'] = knox_plugin_install_properties['xasecure.audit.hdfs.config.destination.file'] |
| advanced_ranger_knox_plugin_properties['XAAUDIT.HDFS.DESTINTATION_FLUSH_INTERVAL_SECONDS'] = knox_plugin_install_properties['xasecure.audit.hdfs.config.destination.flush.interval.seconds'] |
| advanced_ranger_knox_plugin_properties['XAAUDIT.HDFS.DESTINTATION_ROLLOVER_INTERVAL_SECONDS'] = knox_plugin_install_properties[ |
| 'xasecure.audit.hdfs.config.destination.rollover.interval.seconds'] |
| advanced_ranger_knox_plugin_properties['XAAUDIT.HDFS.DESTINTATION_OPEN_RETRY_INTERVAL_SECONDS'] = knox_plugin_install_properties[ |
| 'xasecure.audit.hdfs.config.destination.open.retry.interval.seconds'] |
| advanced_ranger_knox_plugin_properties['XAAUDIT.HDFS.LOCAL_BUFFER_FILE'] = knox_plugin_install_properties['xasecure.audit.hdfs.config.local.buffer.file'] |
| advanced_ranger_knox_plugin_properties['XAAUDIT.HDFS.LOCAL_BUFFER_FLUSH_INTERVAL_SECONDS'] = knox_plugin_install_properties['xasecure.audit.hdfs.config.local.buffer.flush.interval.seconds'] |
| advanced_ranger_knox_plugin_properties['XAAUDIT.HDFS.LOCAL_BUFFER_ROLLOVER_INTERVAL_SECONDS'] = knox_plugin_install_properties[ |
| 'xasecure.audit.hdfs.config.local.buffer.rollover.interval.seconds'] |
| advanced_ranger_knox_plugin_properties['XAAUDIT.HDFS.LOCAL_ARCHIVE_MAX_FILE_COUNT'] = knox_plugin_install_properties['xasecure.audit.hdfs.config.local.archive.max.file.count'] |
| |
| knox_ssl_keystore_password = '' |
| knox_ssl_truststore_password = '' |
| |
| libpath = os.path.join(hdp_version_dir, 'ranger-knox-plugin', 'install', 'lib', '*') |
| aliasKey = 'sslkeystore' |
| aliasValue = '' |
| filepath = os.path.join('/etc/ranger', knox_plugin_install_properties['xasecure.audit.repository.name'], 'cred.jceks') |
| getorcreateorlist = 'get' |
| |
| statuscode, value = call_keystore(libpath, aliasKey, aliasValue, filepath, getorcreateorlist) |
| if statuscode == 0: |
| knox_ssl_keystore_password = value.strip() |
| |
| aliasKey = 'ssltruststore' |
| statuscode, value = call_keystore(libpath, aliasKey, aliasValue, filepath, getorcreateorlist) |
| if statuscode == 0: |
| knox_ssl_truststore_password = value.strip() |
| |
| advanced_ranger_knox_plugin_properties['SSL_KEYSTORE_FILE_PATH'] = knox_plugin_install_properties['xasecure.policymgr.clientssl.keystore'] |
| advanced_ranger_knox_plugin_properties['SSL_KEYSTORE_PASSWORD'] = knox_ssl_keystore_password |
| advanced_ranger_knox_plugin_properties['SSL_TRUSTSTORE_FILE_PATH'] = knox_plugin_install_properties['xasecure.policymgr.clientssl.truststore'] |
| advanced_ranger_knox_plugin_properties['SSL_TRUSTSTORE_PASSWORD'] = knox_ssl_truststore_password |
| |
| date_time_stamp = getDateTimeNow() |
| plugin_configuration_data = '[{"Clusters":{"desired_config":[{"type": "ranger-knox-plugin-properties", "service_config_version_note": "Initial configuration for Ranger KNOX plugin" ,"tag":"' + str(date_time_stamp) + '", "properties":' + json.dumps( |
| advanced_ranger_knox_plugin_properties) + ',"properties_attributes": {"final": "false"}}]}}]' |
| |
| print ('####################### ranger_knox_plugin_properties configuration :') |
| for each_key in advanced_ranger_knox_plugin_properties: |
| print str(each_key) + ' = ' + str(advanced_ranger_knox_plugin_properties[each_key]) |
| |
| confirm_configurations = raw_input('please confirm the above configuration values y/n (n) : ') |
| if(confirm_configurations == ''): |
| confirm_configurations = 'n' |
| print ('input registered as ' + str(confirm_configurations)) |
| |
| |
| if(confirm_configurations.lower() == 'y'): |
| ranger_config_request_url = ambari_cluster_url |
| request_result = call_ambari_api(ranger_config_request_url, 'PUT', ambari_username_password, str(plugin_configuration_data)) |
| if request_result is not None: |
| response_code = request_result.getcode() |
| response = json.loads(json.JSONEncoder().encode(request_result.read())) |
| if response_code == 200 and response is not None: |
| print('ranger knox plugin configuration added successfully in ambari.') |
| return True |
| else: |
| print('ranger knox plugin configuration add failed in ambari.') |
| return False |
| else: |
| print('ranger knox plugin configuration add failed in ambari.') |
| return False |
| else: |
| print ('exiting installation without configuration !') |
| sys.exit(0) |
| else: |
| print('ranger knox plugin configuration add failed in ambari.') |
| return False |
| |
| |
| def port_ranger_storm_plugin_to_ambari(): |
| print('Trying to add ranger storm plugin.') |
| flag_storm_plugin_installed, storm_plugin_install_properties = get_storm_plugin_configuration() |
| if flag_storm_plugin_installed and storm_plugin_install_properties is not None: |
| print('Storm plugin is installed and enabled, adding to configurations') |
| advanced_ranger_storm_plugin_properties = dict() |
| |
| advanced_ranger_storm_plugin_properties['policy_user'] = 'storm' |
| advanced_ranger_storm_plugin_properties['common.name.for.certificate'] = '-' |
| advanced_ranger_storm_plugin_properties['ranger-storm-plugin-enabled'] = 'Yes' |
| advanced_ranger_storm_plugin_properties['REPOSITORY_CONFIG_USERNAME'] = 'stormtestuser@EXAMPLE.COM' |
| advanced_ranger_storm_plugin_properties['REPOSITORY_CONFIG_PASSWORD'] = 'stormtestuser' |
| advanced_ranger_storm_plugin_properties['XAAUDIT.DB.IS_ENABLED'] = storm_plugin_install_properties['xasecure.audit.db.is.enabled'] |
| advanced_ranger_storm_plugin_properties['XAAUDIT.HDFS.IS_ENABLED'] = storm_plugin_install_properties['xasecure.audit.hdfs.is.enabled'] |
| advanced_ranger_storm_plugin_properties['XAAUDIT.HDFS.DESTINATION_DIRECTORY'] = storm_plugin_install_properties['xasecure.audit.hdfs.config.destination.directory'] |
| advanced_ranger_storm_plugin_properties['XAAUDIT.HDFS.LOCAL_BUFFER_DIRECTORY'] = storm_plugin_install_properties['xasecure.audit.hdfs.config.local.buffer.directory'] |
| advanced_ranger_storm_plugin_properties['XAAUDIT.HDFS.LOCAL_ARCHIVE_DIRECTORY'] = storm_plugin_install_properties['xasecure.audit.hdfs.config.local.archive.directory'] |
| advanced_ranger_storm_plugin_properties['XAAUDIT.HDFS.DESTINTATION_FILE'] = storm_plugin_install_properties['xasecure.audit.hdfs.config.destination.file'] |
| advanced_ranger_storm_plugin_properties['XAAUDIT.HDFS.DESTINTATION_FLUSH_INTERVAL_SECONDS'] = storm_plugin_install_properties['xasecure.audit.hdfs.config.destination.flush.interval.seconds'] |
| advanced_ranger_storm_plugin_properties['XAAUDIT.HDFS.DESTINTATION_ROLLOVER_INTERVAL_SECONDS'] = storm_plugin_install_properties[ |
| 'xasecure.audit.hdfs.config.destination.rollover.interval.seconds'] |
| advanced_ranger_storm_plugin_properties['XAAUDIT.HDFS.DESTINTATION_OPEN_RETRY_INTERVAL_SECONDS'] = storm_plugin_install_properties[ |
| 'xasecure.audit.hdfs.config.destination.open.retry.interval.seconds'] |
| advanced_ranger_storm_plugin_properties['XAAUDIT.HDFS.LOCAL_BUFFER_FILE'] = storm_plugin_install_properties['xasecure.audit.hdfs.config.local.buffer.file'] |
| advanced_ranger_storm_plugin_properties['XAAUDIT.HDFS.LOCAL_BUFFER_FLUSH_INTERVAL_SECONDS'] = storm_plugin_install_properties['xasecure.audit.hdfs.config.local.buffer.flush.interval.seconds'] |
| advanced_ranger_storm_plugin_properties['XAAUDIT.HDFS.LOCAL_BUFFER_ROLLOVER_INTERVAL_SECONDS'] = storm_plugin_install_properties[ |
| 'xasecure.audit.hdfs.config.local.buffer.rollover.interval.seconds'] |
| advanced_ranger_storm_plugin_properties['XAAUDIT.HDFS.LOCAL_ARCHIVE_MAX_FILE_COUNT'] = storm_plugin_install_properties['xasecure.audit.hdfs.config.local.archive.max.file.count'] |
| advanced_ranger_storm_plugin_properties['SSL_KEYSTORE_FILE_PATH'] = storm_plugin_install_properties['xasecure.policymgr.clientssl.keystore'] |
| advanced_ranger_storm_plugin_properties['SSL_TRUSTSTORE_FILE_PATH'] = storm_plugin_install_properties['xasecure.policymgr.clientssl.truststore'] |
| |
| date_time_stamp = getDateTimeNow() |
| plugin_configuration_data = '[{"Clusters":{"desired_config":[{"type": "ranger-storm-plugin-properties", "service_config_version_note": "Initial configuration for Ranger STORM plugin" ,"tag":"' + str(date_time_stamp) + '", "properties":' + json.dumps( |
| advanced_ranger_storm_plugin_properties) + ',"properties_attributes": {"final": "false"}}]}}]' |
| |
| print ('####################### ranger_storm_plugin_properties configuration :') |
| for each_key in advanced_ranger_storm_plugin_properties: |
| print str(each_key) + ' = ' + str(advanced_ranger_storm_plugin_properties[each_key]) |
| |
| confirm_configurations = raw_input('please confirm the above configuration values y/n (n) : ') |
| if(confirm_configurations == ''): |
| confirm_configurations = 'n' |
| print ('Input registered as ' + str(confirm_configurations)) |
| |
| |
| if(confirm_configurations.lower() == 'y'): |
| ranger_config_request_url = ambari_cluster_url |
| request_result = call_ambari_api(ranger_config_request_url, 'PUT', ambari_username_password, str(plugin_configuration_data)) |
| if request_result is not None: |
| response_code = request_result.getcode() |
| response = json.loads(json.JSONEncoder().encode(request_result.read())) |
| if response_code == 200 and response is not None: |
| print('ranger storm plugin configuration added successfully in ambari.') |
| return True |
| else: |
| print('ranger storm plugin configuration add failed in ambari.') |
| return False |
| else: |
| print('ranger storm plugin configuration add failed in ambari.') |
| return False |
| else: |
| print ('exiting installation without configuration !') |
| sys.exit(0) |
| else: |
| print('ranger storm plugin configuration add failed in ambari.') |
| return False |
| |
| |
| |
| def get_hdfs_plugin_configuration(): |
| flag_hdfs_plugin_installed = False |
| hdfs_plugin_install_properties = dict() |
| print('hdfs plugin is present and installed to ranger,getting additional properties from installed files .') |
| base_hadoop_conf_path = '/etc/hadoop/conf/' |
| hdfs_site_xml_path = os.path.join(base_hadoop_conf_path, 'hdfs-site.xml') |
| hdfs_site_xml_properties = import_properties_from_xml(hdfs_site_xml_path) |
| xasecure_audit_xml_path = os.path.join(base_hadoop_conf_path, 'xasecure-audit.xml') |
| hdfs_plugin_install_properties = import_properties_from_xml(xasecure_audit_xml_path, hdfs_plugin_install_properties) |
| xasecure_hdfs_security_xml_path = os.path.join(base_hadoop_conf_path, 'xasecure-hdfs-security.xml') |
| hdfs_plugin_install_properties = import_properties_from_xml(xasecure_hdfs_security_xml_path, hdfs_plugin_install_properties) |
| xasecure_policy_ssl_xml_path = os.path.join(base_hadoop_conf_path, 'xasecure-policymgr-ssl.xml') |
| hdfs_plugin_install_properties = import_properties_from_xml(xasecure_policy_ssl_xml_path, hdfs_plugin_install_properties) |
| flag_plugin_installed = check_plugin_enabled('hdfs', hdfs_plugin_install_properties) |
| if(flag_plugin_installed): |
| flag_hdfs_plugin_installed = True |
| return flag_hdfs_plugin_installed, hdfs_plugin_install_properties, hdfs_site_xml_properties |
| |
| |
| def get_hive_plugin_configuration(): |
| flag_hive_plugin_installed = False |
| hive_plugin_install_properties = dict() |
| print('hive plugin is present and installed to ranger, configuring to setup in ambari.') |
| base_hive_conf_path = '/etc/hive/conf/' |
| hive_server2_xml_path = os.path.join(base_hive_conf_path, 'hiveserver2-site.xml') |
| hive_server2_xml_properties = import_properties_from_xml(hive_server2_xml_path) |
| xasecure_audit_xml_path = os.path.join(base_hive_conf_path, 'xasecure-audit.xml') |
| hive_plugin_install_properties = import_properties_from_xml(xasecure_audit_xml_path, hive_plugin_install_properties) |
| xasecure_hive_security_xml_path = os.path.join(base_hive_conf_path, 'xasecure-hive-security.xml') |
| hive_plugin_install_properties = import_properties_from_xml(xasecure_hive_security_xml_path, hive_plugin_install_properties) |
| xasecure_policy_ssl_xml_path = os.path.join(base_hive_conf_path, 'xasecure-policymgr-ssl.xml') |
| hive_plugin_install_properties = import_properties_from_xml(xasecure_policy_ssl_xml_path, hive_plugin_install_properties) |
| hive_security_xml_path = os.path.join(base_hive_conf_path, 'xasecure-hive-security.xml') |
| hive_plugin_install_properties = import_properties_from_xml(hive_security_xml_path, hive_plugin_install_properties) |
| flag_plugin_installed = check_plugin_enabled('hive', hive_plugin_install_properties) |
| if(flag_plugin_installed): |
| flag_hive_plugin_installed = True |
| return flag_hive_plugin_installed, hive_plugin_install_properties, hive_server2_xml_properties |
| |
| |
| def get_hbase_plugin_configuration(): |
| flag_hbase_plugin_installed = False |
| hbase_plugin_install_properties = dict() |
| print('hbase plugin is present and installed to ranger, configuring to setup in ambari.') |
| base_hbase_conf_path = '/etc/hbase/conf/' |
| hbase_site_xml_path = os.path.join(base_hbase_conf_path, 'hbase-site.xml') |
| hbase_site_xml_properties = import_properties_from_xml(hbase_site_xml_path) |
| xasecure_audit_xml_path = os.path.join(base_hbase_conf_path, 'xasecure-audit.xml') |
| hbase_plugin_install_properties = import_properties_from_xml(xasecure_audit_xml_path, hbase_plugin_install_properties) |
| xasecure_hbase_security_xml_path = os.path.join(base_hbase_conf_path, 'xasecure-hbase-security.xml') |
| hbase_plugin_install_properties = import_properties_from_xml(xasecure_hbase_security_xml_path, hbase_plugin_install_properties) |
| xasecure_policy_ssl_xml_path = os.path.join(base_hbase_conf_path, 'xasecure-policymgr-ssl.xml') |
| hbase_plugin_install_properties = import_properties_from_xml(xasecure_policy_ssl_xml_path, hbase_plugin_install_properties) |
| hbase_security_xml_path = os.path.join(base_hbase_conf_path, 'xasecure-hbase-security.xml') |
| hbase_plugin_install_properties = import_properties_from_xml(hbase_security_xml_path, hbase_plugin_install_properties) |
| flag_plugin_installed = check_plugin_enabled('hbase', hbase_plugin_install_properties) |
| if(flag_plugin_installed): |
| flag_hbase_plugin_installed = True |
| return flag_hbase_plugin_installed, hbase_plugin_install_properties, hbase_site_xml_properties |
| |
| |
| def get_knox_plugin_configuration(): |
| flag_knox_plugin_installed = False |
| knox_plugin_install_properties = dict() |
| print('knox plugin is present and installed to ranger, configuring to setup in ambari.') |
| base_knox_conf_path = '/etc/knox/conf/' |
| xasecure_audit_xml_path = os.path.join(base_knox_conf_path, 'xasecure-audit.xml') |
| knox_plugin_install_properties = import_properties_from_xml(xasecure_audit_xml_path, knox_plugin_install_properties) |
| xasecure_knox_security_xml_path = os.path.join(base_knox_conf_path, 'xasecure-knox-security.xml') |
| knox_plugin_install_properties = import_properties_from_xml(xasecure_knox_security_xml_path, knox_plugin_install_properties) |
| xasecure_policy_ssl_xml_path = os.path.join(base_knox_conf_path, 'xasecure-policymgr-ssl.xml') |
| knox_plugin_install_properties = import_properties_from_xml(xasecure_policy_ssl_xml_path, knox_plugin_install_properties) |
| flag_plugin_installed = check_plugin_enabled('knox', knox_plugin_install_properties) |
| if(flag_plugin_installed): |
| flag_knox_plugin_installed = True |
| return flag_knox_plugin_installed, knox_plugin_install_properties |
| |
| |
| |
| def get_storm_plugin_configuration(): |
| flag_storm_plugin_installed = False |
| storm_plugin_install_properties = dict() |
| print('storm plugin is present and installed to ranger, configuring to setup in ambari.') |
| base_knox_conf_path = '/etc/storm/conf/' |
| xasecure_audit_xml_path = os.path.join(base_knox_conf_path, 'xasecure-audit.xml') |
| storm_plugin_install_properties = import_properties_from_xml(xasecure_audit_xml_path, storm_plugin_install_properties) |
| xasecure_storm_security_xml_path = os.path.join(base_knox_conf_path, 'xasecure-storm-security.xml') |
| storm_plugin_install_properties = import_properties_from_xml(xasecure_storm_security_xml_path, storm_plugin_install_properties) |
| xasecure_policy_ssl_xml_path = os.path.join(base_knox_conf_path, 'xasecure-policymgr-ssl.xml') |
| storm_plugin_install_properties = import_properties_from_xml(xasecure_policy_ssl_xml_path, storm_plugin_install_properties) |
| flag_plugin_installed = check_plugin_enabled('storm', storm_plugin_install_properties) |
| if(flag_plugin_installed): |
| flag_storm_plugin_installed = True |
| return flag_storm_plugin_installed, storm_plugin_install_properties |
| |
| |
| |
| |
| def check_plugin_enabled(component_name, component_plugin_install_properties): |
| flag_plugin_installed = False |
| if not (str(component_plugin_install_properties['xasecure.audit.repository.name']).strip() == ''): |
| repo_base_path = os.path.join('/etc/ranger', component_plugin_install_properties['xasecure.audit.repository.name']) |
| print('repo_base_path = ' + str(repo_base_path)) |
| if os.path.exists(repo_base_path): |
| print('Plugin is installed for component ' + component_name) |
| flag_plugin_installed = True |
| return flag_plugin_installed |
| |
| |
| def call_ambari_api(ambari_url, method, username_password, data): |
| try: |
| url = ambari_url |
| base64string = base64.encodestring('{0}'.format(username_password)).replace('\n', '') |
| headers = {"X-Requested-By": "ambari"} |
| request = urllib2.Request(url, data, headers, 'compressed') |
| request.get_method = lambda: method |
| request.add_header("Authorization", "Basic {0}".format(base64string)) |
| result = urllib2.urlopen(request) |
| return result |
| except urllib2.URLError, e: |
| if isinstance(e, urllib2.HTTPError): |
| print("HTTP Code: {0}".format(e.code)) |
| print("HTTP Data: {0}".format(e.read())) |
| return e |
| else: |
| print("Error: {0}".format(e.reason)) |
| print ('ambari server is not reachable, please make sure valid ambari server url has been provided and ambari server is started.') |
| return e |
| except httplib.BadStatusLine: |
| print("ambari service is not reachable, please restart the service and then try again") |
| return None |
| |
| |
| def import_properties_from_file(install_properties_path, properties_from_file=None): |
| if properties_from_file is None: |
| print('properties_from_file is none initializing to dict') |
| properties_from_file = dict() |
| if os.path.isfile(install_properties_path): |
| install_properties_file = open(install_properties_path) |
| for each_line in install_properties_file.read().split('\n'): |
| each_line = each_line.strip() |
| if len(each_line) == 0: continue |
| if '#https.service.port' in each_line: |
| each_line = each_line.strip('#') |
| if '#' in each_line: continue |
| key, value = each_line.strip().split("=", 1) |
| key = key.strip() |
| value = value.strip() |
| properties_from_file[key] = value |
| else: |
| print('Property file not found at path : ' + str(install_properties_path)) |
| return properties_from_file |
| |
| |
| def import_properties_from_xml(xml_path, properties_from_xml=None): |
| print('getting values from file : ' + str(xml_path)) |
| if os.path.isfile(xml_path): |
| xml = ET.parse(xml_path) |
| root = xml.getroot() |
| if properties_from_xml is None: |
| properties_from_xml = dict() |
| for child in root.findall('property'): |
| name = child.find("name").text.strip() |
| value = child.find("value").text.strip() if child.find("value").text is not None else "" |
| properties_from_xml[name] = value |
| else: |
| print('XML file not found at path : ' + str(xml_path)) |
| return properties_from_xml |
| |
| |
| def get_authentication_method(): |
| print('Getting authentication method for ranger services') |
| ranger_conf_path = '/etc/ranger/admin/conf' |
| security_appln_context_path = os.path.join(ranger_conf_path,'security-applicationContext.xml') |
| print ('security_appln_context_path = ' + security_appln_context_path) |
| app_context_xml_tree = ET.parse(security_appln_context_path) |
| app_context_xml_root = app_context_xml_tree.getroot() |
| reference_auth_method = None |
| authentication_method = None |
| for child_nodes in app_context_xml_root.getiterator(): |
| if( ('authentication-provider' in str(child_nodes.tag)) and not('-ref' in str(child_nodes.attrib)) ): |
| reference_auth_method = child_nodes.attrib['ref'] |
| |
| if( reference_auth_method is not None and 'jaasAuthProvider' in reference_auth_method): |
| authentication_method = 'UNIX' |
| elif( reference_auth_method is not None and 'activeDirectoryAuthenticationProvider' in reference_auth_method): |
| authentication_method = 'ACTIVE_DIRECTORY' |
| elif( reference_auth_method is not None and 'ldapAuthProvider' in reference_auth_method): |
| authentication_method = 'LDAP' |
| else: |
| authentication_method = 'NONE' |
| |
| return authentication_method |
| |
| |
| |
| def call_keystore(libpath, aliasKey, aliasValue, filepath, getorcreateorlist): |
| finalLibPath = libpath.replace('\\', '/').replace('//', '/') |
| finalFilePath = 'jceks://file/' + filepath.replace('\\', '/').replace('//', '/') |
| if getorcreateorlist == 'create': |
| commandtorun = ['java', '-cp', finalLibPath, 'com.hortonworks.credentialapi.buildks', 'create', aliasKey, '-value', aliasValue, '-provider', finalFilePath] |
| p = Popen(commandtorun, stdin=PIPE, stdout=PIPE, stderr=PIPE) |
| output, error = p.communicate() |
| statuscode = p.returncode |
| return statuscode |
| elif getorcreateorlist == 'get': |
| commandtorun = ['java', '-cp', finalLibPath, 'com.hortonworks.credentialapi.buildks', 'get', aliasKey, '-provider', finalFilePath] |
| p = Popen(commandtorun, stdin=PIPE, stdout=PIPE, stderr=PIPE) |
| output, error = p.communicate() |
| statuscode = p.returncode |
| return statuscode, output |
| elif getorcreateorlist == 'list': |
| commandtorun = ['java', '-cp', finalLibPath, 'org.apache.ranger.credentialapi.buildks', 'list', '-provider', finalFilePath] |
| p = Popen(commandtorun, stdin=PIPE, stdout=PIPE, stderr=PIPE) |
| output, error = p.communicate() |
| statuscode = p.returncode |
| return statuscode, output |
| else: |
| print('proper command not received for input need get or create') |
| |
| |
| def get_hdp_version(): |
| return_code = -1 |
| hdp_output = '' |
| hdp_version = None |
| match = None |
| statuscode = -1 |
| try: |
| command_to_run = 'hdp-select status hadoop-client' |
| output = Popen(command_to_run, stdin=PIPE, stdout=PIPE, stderr=PIPE, shell=True) |
| return_code, error = output.communicate() |
| statuscode = output.returncode |
| except Exception, e: |
| print('Error : ' + str(e)) |
| if statuscode == 0: |
| hdp_version = re.sub('hadoop-client - ', '', return_code) |
| hdp_version = hdp_version.rstrip() |
| match = re.match('[0-9]+.[0-9]+.[0-9]+.[0-9]+-[0-9]+', hdp_version) |
| print ('hdp_version = ' + hdp_version) |
| else: |
| print('Unable to determine the current version because of a non-zero return code of {0}'.format(str(return_code))) |
| |
| if match is None: |
| print('Failed to get extracted version') |
| return None |
| else: |
| return hdp_version |
| |
| def getDateTimeNow(): |
| return datetime.datetime.now().strftime("%Y%m%d%H%M%S") |
| |
| |
| if __name__ == '__main__': |
| |
| |
| if len(sys.argv) > 1: |
| function_to_call = sys.argv[1] if len(sys.argv) > 1 else None |
| base_url = sys.argv[2] if len(sys.argv) > 2 else None |
| print ('base url = ' + base_url) |
| ambari_username_password = sys.argv[3] if len(sys.argv) > 3 else None |
| print ('ambari_username_password = ' + ambari_username_password) |
| cluster_name = sys.argv[4] if len(sys.argv) > 4 else None |
| print ('cluster_name = ' + cluster_name) |
| ranger_admin_fqdn = sys.argv[5] if len(sys.argv) > 5 else None |
| print ('ranger_admin_fqdn = ' + ranger_admin_fqdn) |
| ranger_service_name = 'RANGER' |
| admin_component_name = 'RANGER_ADMIN' |
| usersync_component_name = 'RANGER_USERSYNC' |
| ambari_cluster_url = str(base_url) + '/api/v1/clusters/' + str(cluster_name) |
| ambari_service_url = str(ambari_cluster_url) + '/services' |
| hdp_dir = os.path.join('/usr', 'hdp') |
| hdp_current_dir = os.path.join(hdp_dir, 'current') |
| hdp_version = get_hdp_version() |
| print('Found hdp_version = ' + str(hdp_version)) |
| hdp_version_dir = os.path.join(hdp_dir, hdp_version) |
| if function_to_call is not None and len(function_to_call) > 0: |
| print('Found first argument as : ' + function_to_call) |
| function_to_call = int(function_to_call) |
| if function_to_call == 1: |
| print('Porting ranger admin installation details to ambari.') |
| port_ranger_installation_to_ambari() |
| elif function_to_call == 2: |
| print('Porting ranger User-sync installation details to ambari.') |
| port_ranger_usersync_installation_to_ambari() |
| elif function_to_call == 3: |
| print('Porting ranger hdfs plugin details to ambari.') |
| port_ranger_hdfs_plugin_to_ambari() |
| elif function_to_call == 4: |
| print('Porting ranger Hive plugin details to ambari.') |
| port_ranger_hive_plugin_to_ambari() |
| elif function_to_call == 5: |
| print('Porting ranger Hbase plugin details to ambari.') |
| port_ranger_hbase_plugin_to_ambari() |
| elif function_to_call == 6: |
| print('Porting ranger Knox plugin details to ambari.') |
| port_ranger_knox_plugin_to_ambari() |
| elif function_to_call == 7: |
| print('Porting ranger Storm plugin details to ambari.') |
| port_ranger_storm_plugin_to_ambari() |
| else: |
| print ('Unsupported option passed for installation, please pass proper supported option') |
| |
| else: |
| print('Usage :' |
| '\n python import_ranger_to_ambari.py {install option eg. 1} { ambari server url (eg. http://100.100.100.100:8080) } {ambari server username password (eg. demo_user:demo_pass) } {cluster name (eg. ambari_cluster)} {FQDN of host having Ranger Admin or Ranger Usersync or plugins installe (eg. ambari.server.com)} ' |
| '\n Actual call will be like : python ranger_port_script.py 1 http://100.100.100.100:8080 demo_user:demo_pass ambari_cluster ambari.server.com' |
| '\n Pass first parameter as 1 for Ranger integration with Ambari.' |
| '\n Pass first parameter as 2 for Ranger User-sync integration with Ambari.' |
| '\n Pass first parameter as 3 for Ranger Hdfs Plugin integration with Ambari.' |
| '\n Pass first parameter as 4 for Ranger Hive Plugin integration with Ambari.' |
| '\n Pass first parameter as 5 for Ranger Hbase Plugin integration with Ambari.' |
| '\n Pass first parameter as 6 for Ranger Knox Plugin integration with Ambari.' |
| '\n Pass first parameter as 7 for Ranger Storm Plugin integration with Ambari.') |
| |
| sys.exit(0) |
| |