cpp/qpid-autotools-install - qpid - Git at Google


            
            #!/bin/sh

            
            #

            
            # Licensed to the Apache Software Foundation (ASF) under one

            
            # or more contributor license agreements.  See the NOTICE file

            
            # distributed with this work for additional information

            
            # regarding copyright ownership.  The ASF licenses this file

            
            # to you under the Apache License, Version 2.0 (the

            
            # "License"); you may not use this file except in compliance

            
            # with the License.  You may obtain a copy of the License at

            
            #

            
            #   http://www.apache.org/licenses/LICENSE-2.0

            
            #

            
            # Unless required by applicable law or agreed to in writing,

            
            # software distributed under the License is distributed on an

            
            # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY

            
            # KIND, either express or implied.  See the License for the

            
            # specific language governing permissions and limitations

            
            # under the License.

            
            #

            
            # Written by Jim Meyering


            VERSION='2007-01-22 19:38' # UTC


            prog_name=`basename $0`

            
            die () { echo "$prog_name: $*" >&2; exit 1; }


            tarballs='

            
              http://pkgconfig.freedesktop.org/releases/pkg-config-0.21.tar.gz

            
              ftp://ftp.gnu.org/gnu/m4/m4-1.4.8.tar.gz

            
              ftp://ftp.gnu.org/gnu/automake/automake-1.10.tar.gz

            
              ftp://ftp.gnu.org/gnu/autoconf/autoconf-2.61.tar.gz

            
              ftp://ftp.gnu.org/gnu/libtool/libtool-1.5.22.tar.gz

            
            '


            usage() {

            
              echo >&2 "\

            
            Usage: $0 [OPTION]...

            
            Download, build, and install some tools.


            Options:

            
             --prefix=PREFIX    install tools under specified directory

            
             --skip-check       do not run "make check" (this can save 50+ min)

            
             --help             display this help and exit


            For example, to install programs into \$HOME/qpid-tools/bin, run this command:


              $prog_name --prefix=\$HOME/qpid-tools


            If you've already verified that your system/environment can build working

            
            versions of these tools, you can make this script complete in just a

            
            minute or two (rather than about an hour if you let all "make check"

            
            tests run) by invoking it like this:


              $prog_name --prefix=\$HOME/qpid-tools --skip-check


            "

            
            }


            # Get the listed tarballs into the current directory.

            
            get_sources()

            
            {

            
              case `wget --help` in

            
                *'--no-cache'*)

            
                  WGET_COMMAND='wget -nv --no-cache';;

            
                *'--cache=on/off'*)

            
                  WGET_COMMAND='wget -nv --cache=off';;

            
                *'--non-verbose'*)

            
                  WGET_COMMAND='wget -nv';;

            
                *)

            
                  die 'no wget program found; please install it and try again';;

            
              esac


              # Download the each tar-ball along with its signature, if there is one.

            
              pkgs=

            
              for t in $(echo $tarballs); do

            
                base=$(basename $t)

            
                pkgs="$pkgs $base"

            
                test -f $base     || $WGET_COMMAND $t


                # pkg-config has no .sig file.

            
                case $base in pkg-config*) continue;; esac


                test -f $base.sig || $WGET_COMMAND $t.sig

            
                # Verify each signature.

            
                gpg --quiet --verify --trust-model=always   \

            
                    --trusted-key=32419B785D0CDCFC          \

            
                    --trusted-key=3859C03B2E236E47          \

            
                    --trusted-key=B93F60C6B5C4CE13          \

            
                    --trusted-key=F382AE19F4850180          \

            
                    $base.sig > /dev/null 2>&1              \

            
                  || echo "info: not verifying GPG signature for $base" 1>&2

            
              done


              printf 'verifying package SHA1 checksums...' 1>&2

            
              sha1sum -c --warn --status <<EOF || die "checksum mismatch"

            
            69f37c509a4757d747b6f4c091d209ab3984d62f  autoconf-2.61.tar.gz

            
            69dc02b083b9a609b28fc4db129fef6a83ed2339  automake-1.10.tar.gz

            
            17353e66aeaac80ae188ea0a3a90609550ce3254  libtool-1.5.22.tar.gz

            
            32b5bb526de9315d1a319c2ca8eb881d9b835506  m4-1.4.8.tar.gz

            
            b2508ba8404cad46ec42f6f58cbca43ae59d715f  pkg-config-0.21.tar.gz

            
            EOF

            
              printf 'ok\n' 1>&2

            
              echo $pkgs

            
            }


            #################################################################

            
            set -e


            # Parse options.


            make_check=yes

            
            prefix=


            for option

            
            do

            
              case $option in

            
                --help) usage; exit;;

            
                --skip-check) make_check=no;;

            
                --prefix=*) prefix=`expr "$option" : '--prefix=\(.*\)'`;;

            
                *) die "$option: unknown option";;

            
              esac

            
            done


            test -n "$prefix" \

            
              || die "you must specify a --prefix"


            case $prefix in

            
              /*) ;;

            
              *) die 'invalid prefix: '"$prefix"': it must be an absolute name';;

            
            esac


            # Don't run as root.

            
            # Make sure id -u succeeds.

            
            my_uid=`id -u`

            
            test $? = 0 || {

            
              echo "$0: cannot run \`id -u'" 1>&2

            
              (exit 1); exit 1

            
            }

            
            test $my_uid = 0 && die "please don't run this program as root"


            # Ensure that prefix is not /usr/bin or /bin, /sbin, etc.

            
            case $prefix in

            
              /bin|/sbin|/usr/bin|/usr/sbin)

            
                die "don't set PREFIX to a system directory";;

            
              *) ;;

            
            esac


            # Create a build directory, then cd into it for the rest....

            
            tmpdir=.build-auto-tools

            
            mkdir -p $tmpdir

            
            cd $tmpdir


            pkgs=$(get_sources)


            for pkg in $pkgs; do

            
              echo building/installing $pkg...

            
              dir=$(basename $pkg .tar.gz)

            
              rm -rf dir

            
              gzip -dc $pkg|tar xf -

            
              cd $dir

            
              ./configure CFLAGS=-O2 LDFLAGS=-s --prefix=$prefix    > makerr-config  2>&1

            
              make -j1                                              > makerr-build   2>&1

            
              if test "$make_check" = yes; then

            
                case $pkg in

            
                  automake*) expected_duration_minutes=40;;

            
                  autoconf*) expected_duration_minutes=15;;

            
                  # libtool*) expected_duration_minutes=3;;

            
                  *);;

            
                esac

            
                test -n "$expected_duration_minutes" \

            
                  && echo "running 'make check' for $pkg; NB: this can take over" \

            
                          "$expected_duration_minutes minutes"

            
                case $pkg in

            
                  # In this package, the check-requires-private test fails.

            
                  # Change the Makefile so it skips that test.

            
                  pkg-config-0.21.tar.gz)

            
                    perl -pi.bak -e 's/check-requires-private //' check/Makefile;;


                esac

            
                make -j1 check                                      > makerr-check   2>&1

            
              fi

            
              make -j1 install                                      > makerr-install 2>&1

            
              echo done at $(date +%Y-%m-%d.%T)

            
              cd ..

            
            done


            # Without checks (and with existing tarballs), it takes just one minute.

            
            # Including all checks, it takes nearly an hour on an AMD64/3400+


            case $PKG_CONFIG_PATH in

            
              $prefix/lib/pkgconfig:/usr/lib/pkgconfig)

            
                echo 'Good! your PKG_CONFIG_PATH envvar is already set';;

            
              *) cat <<EOF;;

            
            **************************************************************************

            
            Be sure that PKG_CONFIG_PATH is set in your environment, e.g.,

            
            PKG_CONFIG_PATH=$prefix/lib/pkgconfig:/usr/lib/pkgconfig

            
            **************************************************************************

            
            EOF

            
            esac


            case $PATH in

            
              "$prefix/bin:"*) echo 'Good! your PATH is fine';;

            
              *) cat <<EOF;;

            
            **************************************************************************

            
            Be sure that "$prefix/bin" is earlier in your PATH than /bin, /usr/bin, etc.

            
            **************************************************************************

            
            EOF

            
            esac


            cat <<EOF

            
            **************************************************************************

            
            You may want to remove the tool build directory:

            
            rm -rf $tmpdir

            
            **************************************************************************

            
            EOF


            ## Local Variables:

            
            ## eval: (add-hook 'write-file-hooks 'time-stamp)

            
            ## time-stamp-start: "VERSION='"

            
            ## time-stamp-format: "%:y-%02m-%02d %02H:%02M"

            
            ## time-stamp-time-zone: "UTC"

            
            ## time-stamp-end: "' # UTC"

            
            ## End:
	#!/bin/sh
	#
	# Licensed to the Apache Software Foundation (ASF) under one
	# or more contributor license agreements. See the NOTICE file
	# distributed with this work for additional information
	# regarding copyright ownership. The ASF licenses this file
	# to you under the Apache License, Version 2.0 (the
	# "License"); you may not use this file except in compliance
	# with the License. You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing,
	# software distributed under the License is distributed on an
	# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
	# KIND, either express or implied. See the License for the
	# specific language governing permissions and limitations
	# under the License.
	#
	# Written by Jim Meyering

	VERSION='2007-01-22 19:38' # UTC

	prog_name=`basename $0`
	die () { echo "$prog_name: $*" >&2; exit 1; }

	tarballs='
	http://pkgconfig.freedesktop.org/releases/pkg-config-0.21.tar.gz
	ftp://ftp.gnu.org/gnu/m4/m4-1.4.8.tar.gz
	ftp://ftp.gnu.org/gnu/automake/automake-1.10.tar.gz
	ftp://ftp.gnu.org/gnu/autoconf/autoconf-2.61.tar.gz
	ftp://ftp.gnu.org/gnu/libtool/libtool-1.5.22.tar.gz
	'

	usage() {
	echo >&2 "\
	Usage: $0 [OPTION]...
	Download, build, and install some tools.

	Options:
	--prefix=PREFIX install tools under specified directory
	--skip-check do not run "make check" (this can save 50+ min)
	--help display this help and exit

	For example, to install programs into \$HOME/qpid-tools/bin, run this command:

	$prog_name --prefix=\$HOME/qpid-tools

	If you've already verified that your system/environment can build working
	versions of these tools, you can make this script complete in just a
	minute or two (rather than about an hour if you let all "make check"
	tests run) by invoking it like this:

	$prog_name --prefix=\$HOME/qpid-tools --skip-check

	"
	}

	# Get the listed tarballs into the current directory.
	get_sources()
	{
	case `wget --help` in
	'--no-cache')
	WGET_COMMAND='wget -nv --no-cache';;
	'--cache=on/off')
	WGET_COMMAND='wget -nv --cache=off';;
	'--non-verbose')
	WGET_COMMAND='wget -nv';;
	*)
	die 'no wget program found; please install it and try again';;
	esac

	# Download the each tar-ball along with its signature, if there is one.
	pkgs=
	for t in $(echo $tarballs); do
	base=$(basename $t)
	pkgs="$pkgs $base"
	test -f $base \|\| $WGET_COMMAND $t

	# pkg-config has no .sig file.
	case $base in pkg-config*) continue;; esac

	test -f $base.sig \|\| $WGET_COMMAND $t.sig
	# Verify each signature.
	gpg --quiet --verify --trust-model=always \
	--trusted-key=32419B785D0CDCFC \
	--trusted-key=3859C03B2E236E47 \
	--trusted-key=B93F60C6B5C4CE13 \
	--trusted-key=F382AE19F4850180 \
	$base.sig > /dev/null 2>&1 \
	\|\| echo "info: not verifying GPG signature for $base" 1>&2
	done

	printf 'verifying package SHA1 checksums...' 1>&2
	sha1sum -c --warn --status <<EOF \|\| die "checksum mismatch"
	69f37c509a4757d747b6f4c091d209ab3984d62f autoconf-2.61.tar.gz
	69dc02b083b9a609b28fc4db129fef6a83ed2339 automake-1.10.tar.gz
	17353e66aeaac80ae188ea0a3a90609550ce3254 libtool-1.5.22.tar.gz
	32b5bb526de9315d1a319c2ca8eb881d9b835506 m4-1.4.8.tar.gz
	b2508ba8404cad46ec42f6f58cbca43ae59d715f pkg-config-0.21.tar.gz
	EOF
	printf 'ok\n' 1>&2
	echo $pkgs
	}

	#################################################################
	set -e

	# Parse options.

	make_check=yes
	prefix=

	for option
	do
	case $option in
	--help) usage; exit;;
	--skip-check) make_check=no;;
	--prefix=) prefix=`expr "$option" : '--prefix=\(.\)'`;;
	*) die "$option: unknown option";;
	esac
	done

	test -n "$prefix" \
	\|\| die "you must specify a --prefix"

	case $prefix in
	/*) ;;
	*) die 'invalid prefix: '"$prefix"': it must be an absolute name';;
	esac

	# Don't run as root.
	# Make sure id -u succeeds.
	my_uid=`id -u`
	test $? = 0 \|\| {
	echo "$0: cannot run \`id -u'" 1>&2
	(exit 1); exit 1
	}
	test $my_uid = 0 && die "please don't run this program as root"

	# Ensure that prefix is not /usr/bin or /bin, /sbin, etc.
	case $prefix in
	/bin\|/sbin\|/usr/bin\|/usr/sbin)
	die "don't set PREFIX to a system directory";;
	*) ;;
	esac

	# Create a build directory, then cd into it for the rest....
	tmpdir=.build-auto-tools
	mkdir -p $tmpdir
	cd $tmpdir

	pkgs=$(get_sources)

	for pkg in $pkgs; do
	echo building/installing $pkg...
	dir=$(basename $pkg .tar.gz)
	rm -rf dir
	gzip -dc $pkg\|tar xf -
	cd $dir
	./configure CFLAGS=-O2 LDFLAGS=-s --prefix=$prefix > makerr-config 2>&1
	make -j1 > makerr-build 2>&1
	if test "$make_check" = yes; then
	case $pkg in
	automake*) expected_duration_minutes=40;;
	autoconf*) expected_duration_minutes=15;;
	# libtool*) expected_duration_minutes=3;;
	*);;
	esac
	test -n "$expected_duration_minutes" \
	&& echo "running 'make check' for $pkg; NB: this can take over" \
	"$expected_duration_minutes minutes"
	case $pkg in
	# In this package, the check-requires-private test fails.
	# Change the Makefile so it skips that test.
	pkg-config-0.21.tar.gz)
	perl -pi.bak -e 's/check-requires-private //' check/Makefile;;

	esac
	make -j1 check > makerr-check 2>&1
	fi
	make -j1 install > makerr-install 2>&1
	echo done at $(date +%Y-%m-%d.%T)
	cd ..
	done

	# Without checks (and with existing tarballs), it takes just one minute.
	# Including all checks, it takes nearly an hour on an AMD64/3400+

	case $PKG_CONFIG_PATH in
	$prefix/lib/pkgconfig:/usr/lib/pkgconfig)
	echo 'Good! your PKG_CONFIG_PATH envvar is already set';;
	*) cat <<EOF;;
	**************************************************************************
	Be sure that PKG_CONFIG_PATH is set in your environment, e.g.,
	PKG_CONFIG_PATH=$prefix/lib/pkgconfig:/usr/lib/pkgconfig
	**************************************************************************
	EOF
	esac

	case $PATH in
	"$prefix/bin:"*) echo 'Good! your PATH is fine';;
	*) cat <<EOF;;
	**************************************************************************
	Be sure that "$prefix/bin" is earlier in your PATH than /bin, /usr/bin, etc.
	**************************************************************************
	EOF
	esac

	cat <<EOF
	**************************************************************************
	You may want to remove the tool build directory:
	rm -rf $tmpdir
	**************************************************************************
	EOF

	## Local Variables:
	## eval: (add-hook 'write-file-hooks 'time-stamp)
	## time-stamp-start: "VERSION='"
	## time-stamp-format: "%:y-%02m-%02d %02H:%02M"
	## time-stamp-time-zone: "UTC"
	## time-stamp-end: "' # UTC"
	## End: