| # |
| # Licensed to the Apache Software Foundation (ASF) under one |
| # or more contributor license agreements. See the NOTICE file |
| # distributed with this work for additional information |
| # regarding copyright ownership. The ASF licenses this file |
| # to you under the Apache License, Version 2.0 (the |
| # "License"); you may not use this file except in compliance |
| # with the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, |
| # software distributed under the License is distributed on an |
| # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| # KIND, either express or implied. See the License for the |
| # specific language governing permissions and limitations |
| # under the License. |
| # |
| |
| # Enable dashboard reporting. |
| include (CTest) |
| |
| # Make sure that everything get built before the tests |
| # Need to create a var with all the necessary top level targets |
| |
| # If we're linking Boost for DLLs, turn that on for the unit test too. |
| if (QPID_LINK_BOOST_DYNAMIC) |
| add_definitions(-DBOOST_TEST_DYN_LINK) |
| endif (QPID_LINK_BOOST_DYNAMIC) |
| |
| include_directories( ${CMAKE_CURRENT_SOURCE_DIR} ) |
| |
| include (FindPythonInterp) |
| |
| # Create the environment scripts for tests |
| set (abs_srcdir ${CMAKE_CURRENT_SOURCE_DIR}) |
| set (abs_builddir ${CMAKE_CURRENT_BINARY_DIR}) |
| set (abs_top_srcdir ${CMAKE_SOURCE_DIR}) |
| set (abs_top_builddir ${CMAKE_BINARY_DIR}) |
| set (builddir_lib_suffix "") |
| |
| if (CMAKE_SYSTEM_NAME STREQUAL Windows) |
| configure_file (${CMAKE_CURRENT_SOURCE_DIR}/test_env.ps1.in |
| ${CMAKE_CURRENT_BINARY_DIR}/test_env.ps1) |
| else (CMAKE_SYSTEM_NAME STREQUAL Windows) |
| configure_file (${CMAKE_CURRENT_SOURCE_DIR}/test_env.sh.in |
| ${CMAKE_CURRENT_BINARY_DIR}/test_env.sh) |
| endif (CMAKE_SYSTEM_NAME STREQUAL Windows) |
| |
| |
| # If valgrind is selected in the configuration step, set up the path to it |
| # for CTest. |
| if (ENABLE_VALGRIND) |
| set (MEMORYCHECK_COMMAND ${VALGRIND}) |
| set (MEMORYCHECK_COMMAND_OPTIONS "--gen-suppressions=all |
| --leak-check=full |
| --demangle=yes |
| --suppressions=${CMAKE_CURRENT_SOURCE_DIR}/.valgrind.supp |
| --num-callers=25 |
| --log-file=ctest_valgrind.vglog") |
| endif (ENABLE_VALGRIND) |
| |
| # Using the Boost DLLs triggers warning 4275 on Visual Studio |
| # (non dll-interface class used as base for dll-interface class). |
| # This is ok, so suppress the warning. |
| # Also, boost lengthy names trigger warning 4503, decorated name length exceeded |
| # and using getenv() triggers insecure CRT warnings which we can silence in the |
| # test environment. |
| if (MSVC) |
| add_definitions( /wd4275 /wd4503 /D_CRT_SECURE_NO_WARNINGS) |
| endif (MSVC) |
| |
| # Like this to work with cmake 2.4 on Unix |
| set (qpid_test_boost_libs |
| ${Boost_UNIT_TEST_FRAMEWORK_LIBRARY} ${Boost_SYSTEM_LIBRARY}) |
| |
| # Macro to make it easier to remember where the tests are built |
| macro(remember_location testname) |
| set (${testname}_LOCATION ${CMAKE_CURRENT_BINARY_DIR}/${testname}${CMAKE_EXECUTABLE_SUFFIX}) |
| endmacro(remember_location) |
| |
| # Windows uses some process-startup calls to ensure that errors, etc. don't |
| # result in error boxes being thrown up. Since it's expected that most test |
| # runs will be in scripts, the default is to force these outputs to stderr |
| # instead of windows. If you want to remove this code, build without the |
| # QPID_WINDOWS_DEFAULT_TEST_OUTPUTS ON. |
| if (CMAKE_SYSTEM_NAME STREQUAL Windows) |
| option(QPID_WINDOWS_DEFAULT_TEST_OUTPUTS "Use default error-handling on Windows tests" OFF) |
| if (NOT QPID_WINDOWS_DEFAULT_TEST_OUTPUTS) |
| set(platform_test_additions windows/DisableWin32ErrorWindows.cpp) |
| endif (NOT QPID_WINDOWS_DEFAULT_TEST_OUTPUTS) |
| endif (CMAKE_SYSTEM_NAME STREQUAL Windows) |
| |
| # |
| # Unit test program |
| # |
| # Unit tests are built as a single program to reduce valgrind overhead |
| # when running the tests. If you want to build a subset of the tests run |
| # ccmake and set unit_tests_to_build to the set you want to build. |
| |
| set(all_unit_tests |
| AccumulatedAckTest |
| Array |
| AsyncCompletion |
| AtomicValue |
| ClientMessage |
| ClientMessageTest |
| ClientSessionTest |
| ConsoleTest |
| DeliveryRecordTest |
| DtxWorkRecordTest |
| exception_test |
| ExchangeTest |
| FieldTable |
| FieldValue |
| FrameDecoder |
| FramingTest |
| HeadersExchangeTest |
| HeaderTest |
| InlineAllocator |
| InlineVector |
| logging |
| ManagementTest |
| MessageReplayTracker |
| MessageTest |
| MessagingSessionTests |
| PollableCondition |
| ProxyTest |
| QueueDepth |
| QueueFlowLimitTest |
| QueueOptionsTest |
| QueuePolicyTest |
| QueueRegistryTest |
| QueueTest |
| RangeSet |
| RefCounted |
| RetryList |
| SequenceNumberTest |
| SequenceSet |
| SessionState |
| Shlib |
| StringUtils |
| SystemInfo |
| TimerTest |
| TopicExchangeTest |
| TxBufferTest |
| Url |
| Uuid |
| Variant |
| ${xml_tests} |
| ) |
| |
| set(unit_tests_to_build |
| "" |
| CACHE STRING "Which unit tests to build" |
| ) |
| |
| mark_as_advanced(unit_tests_to_build) |
| |
| # If no unit_test specifically set then use all unit tests |
| if (unit_tests_to_build) |
| set(actual_unit_tests ${unit_tests_to_build}) |
| else() |
| set(actual_unit_tests ${all_unit_tests}) |
| endif() |
| |
| add_executable (unit_test unit_test |
| ${actual_unit_tests} ${platform_test_additions}) |
| target_link_libraries (unit_test |
| ${qpid_test_boost_libs} |
| qpidmessaging qpidbroker qmfconsole) |
| set_target_properties (unit_test PROPERTIES COMPILE_DEFINITIONS _IN_QPID_BROKER) |
| remember_location(unit_test) |
| |
| add_library (shlibtest MODULE shlibtest.cpp) |
| |
| # FIXME aconway 2009-11-30: enable SSL |
| #if SSL |
| #include ssl.mk |
| #endif |
| |
| # |
| # Other test programs |
| # |
| add_executable (qpid-perftest qpid-perftest.cpp ${platform_test_additions}) |
| target_link_libraries (qpid-perftest qpidclient) |
| #qpid_perftest_SOURCES=qpid-perftest.cpp test_tools.h TestOptions.h ConnectionOptions.h |
| remember_location(qpid-perftest) |
| |
| add_executable (qpid-txtest qpid-txtest.cpp ${platform_test_additions}) |
| target_link_libraries (qpid-txtest qpidclient) |
| #qpid_txtest_SOURCES=qpid-txtest.cpp TestOptions.h ConnectionOptions.h |
| remember_location(qpid-txtest) |
| |
| add_executable (qpid-latency-test qpid-latency-test.cpp ${platform_test_additions}) |
| target_link_libraries (qpid-latency-test qpidclient) |
| #qpid_latencytest_SOURCES=qpid-latency-test.cpp TestOptions.h ConnectionOptions.h |
| remember_location(qpid-latency-test) |
| |
| add_executable (echotest echotest.cpp ${platform_test_additions}) |
| target_link_libraries (echotest qpidclient) |
| #echotest_SOURCES=echotest.cpp TestOptions.h ConnectionOptions.h |
| remember_location(echotest) |
| |
| add_executable (qpid-client-test qpid-client-test.cpp ${platform_test_additions}) |
| target_link_libraries (qpid-client-test qpidclient) |
| #qpid_client_test_SOURCES=qpid-client-test.cpp TestOptions.h ConnectionOptions.h |
| remember_location(qpid-client-test) |
| |
| add_executable (qpid-topic-listener qpid-topic-listener.cpp ${platform_test_additions}) |
| target_link_libraries (qpid-topic-listener qpidclient) |
| #qpid_topic_listener_SOURCES=qpid-topic-listener.cpp TestOptions.h ConnectionOptions.h |
| remember_location(qpid-topic-listener) |
| |
| add_executable (qpid-topic-publisher qpid-topic-publisher.cpp ${platform_test_additions}) |
| target_link_libraries (qpid-topic-publisher qpidclient) |
| #qpid_topic_publisher_SOURCES=qpid-topic-publisher.cpp TestOptions.h ConnectionOptions.h |
| remember_location(qpid-topic-publisher) |
| |
| add_executable (publish publish.cpp ${platform_test_additions}) |
| target_link_libraries (publish qpidclient) |
| #publish_SOURCES=publish.cpp TestOptions.h ConnectionOptions.h |
| remember_location(publish) |
| |
| add_executable (consume consume.cpp ${platform_test_additions}) |
| target_link_libraries (consume qpidclient) |
| #consume_SOURCES=consume.cpp TestOptions.h ConnectionOptions.h |
| remember_location(consume) |
| |
| add_executable (header_test header_test.cpp ${platform_test_additions}) |
| target_link_libraries (header_test qpidclient) |
| #header_test_SOURCES=header_test.cpp TestOptions.h ConnectionOptions.h |
| remember_location(header_test) |
| |
| add_executable (declare_queues declare_queues.cpp ${platform_test_additions}) |
| target_link_libraries (declare_queues qpidclient) |
| remember_location(declare_queues) |
| |
| add_executable (replaying_sender replaying_sender.cpp ${platform_test_additions}) |
| target_link_libraries (replaying_sender qpidclient) |
| remember_location(replaying_sender) |
| |
| add_executable (resuming_receiver resuming_receiver.cpp ${platform_test_additions}) |
| target_link_libraries (resuming_receiver qpidclient) |
| remember_location(resuming_receiver) |
| |
| add_executable (txshift txshift.cpp ${platform_test_additions}) |
| target_link_libraries (txshift qpidclient) |
| #txshift_SOURCES=txshift.cpp TestOptions.h ConnectionOptions.h |
| remember_location(txshift) |
| |
| add_executable (txjob txjob.cpp ${platform_test_additions}) |
| target_link_libraries (txjob qpidclient) |
| #txjob_SOURCES=txjob.cpp TestOptions.h ConnectionOptions.h |
| remember_location(txjob) |
| |
| add_executable (receiver receiver.cpp ${platform_test_additions}) |
| target_link_libraries (receiver qpidclient) |
| #receiver_SOURCES=receiver.cpp TestOptions.h ConnectionOptions.h |
| remember_location(receiver) |
| |
| add_executable (sender sender.cpp Statistics.cpp ${platform_test_additions}) |
| target_link_libraries (sender qpidmessaging) |
| #sender_SOURCES=sender.cpp TestOptions.h ConnectionOptions.h |
| remember_location(sender) |
| |
| add_executable (qpid-receive qpid-receive.cpp Statistics.cpp ${platform_test_additions}) |
| target_link_libraries (qpid-receive qpidmessaging) |
| remember_location(qpid-receive) |
| |
| add_executable (qpid-send qpid-send.cpp Statistics.cpp ${platform_test_additions}) |
| target_link_libraries (qpid-send qpidmessaging) |
| remember_location(qpid-send) |
| |
| add_executable (qpid-ping qpid-ping.cpp ${platform_test_additions}) |
| target_link_libraries (qpid-ping qpidclient) |
| remember_location(qpid-ping) |
| |
| add_executable (datagen datagen.cpp ${platform_test_additions}) |
| target_link_libraries (datagen qpidclient) |
| remember_location(datagen) |
| |
| add_executable (msg_group_test msg_group_test.cpp ${platform_test_additions}) |
| target_link_libraries (msg_group_test qpidmessaging) |
| remember_location(msg_group_test) |
| |
| |
| # qpid-perftest and qpid-latency-test are generally useful so install them |
| install (TARGETS |
| qpid-perftest qpid-latency-test qpid-client-test |
| qpid-ping |
| qpid-receive qpid-send qpid-topic-listener qpid-topic-publisher receiver sender |
| qpid-txtest |
| RUNTIME DESTINATION ${QPID_INSTALL_TESTDIR}) |
| |
| # This should ideally be done as part of the test run, but I don't know a way |
| # to get these arguments and the working directory set like Makefile.am does, |
| # and have that run during the test pass. |
| if (PYTHON_EXECUTABLE) |
| set (python_bld ${CMAKE_CURRENT_BINARY_DIR}/python) |
| execute_process(COMMAND ${PYTHON_EXECUTABLE} setup.py install --prefix=${pythoon_bld} --install-lib=${python_bld} --install-scripts=${python_bld}/commands |
| WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}/../python) |
| endif (PYTHON_EXECUTABLE) |
| |
| if (CMAKE_SYSTEM_NAME STREQUAL Windows) |
| set (ENV{OUTDIR} ${EXECUTABLE_OUTPUT_PATH}) |
| set (test_script_suffix ".ps1") |
| set (shell "powershell") |
| endif (CMAKE_SYSTEM_NAME STREQUAL Windows) |
| |
| set(test_wrap ${shell} ${CMAKE_CURRENT_SOURCE_DIR}/run_test${test_script_suffix}) |
| |
| add_test (unit_test ${test_wrap} ${unit_test_LOCATION}) |
| add_test (start_broker ${shell} ${CMAKE_CURRENT_SOURCE_DIR}/start_broker${test_script_suffix}) |
| add_test (qpid-client-test ${test_wrap} ${qpid-client-test_LOCATION}) |
| add_test (quick_perftest ${test_wrap} ${qpid-perftest_LOCATION} --summary --count 100) |
| add_test (quick_topictest ${test_wrap} ${CMAKE_CURRENT_SOURCE_DIR}/quick_topictest${test_script_suffix}) |
| add_test (quick_txtest ${test_wrap} ${qpid-txtest_LOCATION} --queues 4 --tx-count 10 --quiet) |
| if (PYTHON_EXECUTABLE) |
| add_test (run_header_test ${shell} ${CMAKE_CURRENT_SOURCE_DIR}/run_header_test${test_script_suffix}) |
| add_test (python_tests ${test_wrap} ${CMAKE_CURRENT_SOURCE_DIR}/python_tests${test_script_suffix}) |
| endif (PYTHON_EXECUTABLE) |
| add_test (stop_broker ${shell} ${CMAKE_CURRENT_SOURCE_DIR}/stop_broker${test_script_suffix}) |
| if (PYTHON_EXECUTABLE) |
| add_test (ha_tests ${test_wrap} ${PYTHON_EXECUTABLE} ${CMAKE_CURRENT_SOURCE_DIR}/ha_tests.py) |
| add_test (ipv6_test ${shell} ${CMAKE_CURRENT_SOURCE_DIR}/ipv6_test${test_script_suffix}) |
| add_test (federation_tests ${shell} ${CMAKE_CURRENT_SOURCE_DIR}/run_federation_tests${test_script_suffix}) |
| add_test (federation_sys_tests ${shell} ${CMAKE_CURRENT_SOURCE_DIR}/run_federation_sys_tests${test_script_suffix}) |
| if (BUILD_ACL) |
| add_test (acl_tests ${shell} ${CMAKE_CURRENT_SOURCE_DIR}/run_acl_tests${test_script_suffix}) |
| endif (BUILD_ACL) |
| add_test (dynamic_log_level_test ${shell} ${CMAKE_CURRENT_SOURCE_DIR}/dynamic_log_level_test${test_script_suffix}) |
| add_test (dynamic_log_hires_timestamp ${shell} ${CMAKE_CURRENT_SOURCE_DIR}/dynamic_log_hires_timestamp${test_script_suffix}) |
| if (BUILD_MSSQL) |
| add_test (store_tests ${shell} ${CMAKE_CURRENT_SOURCE_DIR}/run_store_tests${test_script_suffix} MSSQL) |
| endif (BUILD_MSSQL) |
| if (BUILD_MSCLFS) |
| add_test (store_tests_clfs ${shell} ${CMAKE_CURRENT_SOURCE_DIR}/run_store_tests${test_script_suffix} MSSQL-CLFS) |
| endif (BUILD_MSCLFS) |
| endif (PYTHON_EXECUTABLE) |
| |
| add_library(test_store MODULE test_store.cpp) |
| target_link_libraries (test_store qpidbroker qpidcommon) |
| set_target_properties (test_store PROPERTIES |
| COMPILE_DEFINITIONS _IN_QPID_BROKER |
| PREFIX "") |
| |
| |
| add_library (dlclose_noop MODULE dlclose_noop.c) |
| #libdlclose_noop_la_LDFLAGS = -module -rpath $(abs_builddir) |
| |
| #CLEANFILES+=valgrind.out *.log *.vglog* dummy_test $(unit_wrappers) |
| # |
| ## Longer running stability tests, not run by default check: target. |
| ## Not run under valgrind, too slow |
| #LONG_TESTS=fanout_perftest shared_perftest multiq_perftest topic_perftest |
| #EXTRA_DIST+=$(LONG_TESTS) run_perftest |
| #check-long: |
| # $(MAKE) check TESTS="start_broker $(LONG_TESTS) stop_broker" VALGRIND= |
| |
| # Include async store tests |
| include(asyncstore.cmake) |
| |
| # |
| # legacystore |
| # |
| #add_subdirectory(legacystore) |
| |
