Dockerfile - qpid-dispatch - Git at Google


            
            #

            
            # Licensed to the Apache Software Foundation (ASF) under one

            
            # or more contributor license agreements.  See the NOTICE file

            
            # distributed with this work for additional information

            
            # regarding copyright ownership.  The ASF licenses this file

            
            # to you under the Apache License, Version 2.0 (the

            
            # "License"); you may not use this file except in compliance

            
            # with the License.  You may obtain a copy of the License at

            
            #

            
            #   http://www.apache.org/licenses/LICENSE-2.0

            
            #

            
            # Unless required by applicable law or agreed to in writing,

            
            # software distributed under the License is distributed on an

            
            # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY

            
            # KIND, either express or implied.  See the License for the

            
            # specific language governing permissions and limitations

            
            # under the License.

            
            #


            # Downloads, builds and installs Apache Qpid Proton and Qpid Dispatch on CentOS and starts the dispatch router

            
            # /main is the top level folder under which proton (/main/qpid-proton/) and dispatch (/main/qpid-dispatch) source code is downloaded from github

            
            # /usr/lib64 is the folder in which the proton artifacts are installed.

            
            # /usr/sbin is the folder in which dispatch executable installed


            # Copy this docker file to your local folder. Build the docker image like this:

            
            # > sudo docker build -t <username>/dispatch --file=Dockerfile .


            # "<username>/dispatch" is a convention, you can call it whatever you want


            # To launch a container running the new image:

            
            # > sudo docker run -i -t <username>/dispatch


            # To launch a container running the new image with an interactive shell prompt:

            
            # > sudo docker run -i -t <username>/dispatch /bin/bash


            ################# Begin code #######


            # Get the latest Centos version from dockerhub

            
            FROM quay.io/centos/centos:stream8


            MAINTAINER "dev@qpid.apache.org"


            # Install all the required packages. Some in this list were picked off from proton's INSTALL.md (https://github.com/apache/qpid-proton/blob/main/INSTALL.md) and the rest are from dispatch (https://github.com/apache/qpid-dispatch/blob/main/README)


            # Enable additional package repositories for CentOS

            
            #  note: PowerTools is called CodeReady Linux Builder in RHEL 8

            
            RUN dnf -y install epel-release

            
            RUN dnf config-manager --set-enabled powertools


            # now install the rest of the packages

            
            RUN dnf -y install gcc gcc-c++ cmake libuuid-devel openssl-devel cyrus-sasl-devel cyrus-sasl-plain cyrus-sasl-gssapi cyrus-sasl-md5 swig python3-devel java-11-openjdk-devel git make doxygen valgrind emacs libuv libuv-devel libwebsockets-devel && dnf clean all -y


            # Create a main directory and clone the qpid-proton repo from github

            
            RUN mkdir /main && cd /main && git clone https://github.com/apache/qpid-proton.git  && cd /main/qpid-proton && mkdir /main/qpid-proton/build


            WORKDIR /main/qpid-proton/build


            # make and install proton

            
            RUN cmake .. -DSYSINSTALL_BINDINGS=ON -DCMAKE_INSTALL_PREFIX=/usr -DSYSINSTALL_PYTHON=ON && make install


            # Clone the qpid-dispatch git repo

            
            RUN cd /main && git clone https://github.com/apache/qpid-dispatch.git && mkdir /main/qpid-dispatch/build


            WORKDIR /main/qpid-dispatch/build

            
            RUN cmake .. -DCMAKE_INSTALL_PREFIX=/usr && make install


            # Uncomment the following line if you would like to run all the dispatch unit tests and system tests.

            
            # RUN ctest -VV


            # Start the dispatch router

            
            ENTRYPOINT ["qdrouterd"]
	#
	# Licensed to the Apache Software Foundation (ASF) under one
	# or more contributor license agreements. See the NOTICE file
	# distributed with this work for additional information
	# regarding copyright ownership. The ASF licenses this file
	# to you under the Apache License, Version 2.0 (the
	# "License"); you may not use this file except in compliance
	# with the License. You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing,
	# software distributed under the License is distributed on an
	# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
	# KIND, either express or implied. See the License for the
	# specific language governing permissions and limitations
	# under the License.
	#

	# Downloads, builds and installs Apache Qpid Proton and Qpid Dispatch on CentOS and starts the dispatch router
	# /main is the top level folder under which proton (/main/qpid-proton/) and dispatch (/main/qpid-dispatch) source code is downloaded from github
	# /usr/lib64 is the folder in which the proton artifacts are installed.
	# /usr/sbin is the folder in which dispatch executable installed


	# Copy this docker file to your local folder. Build the docker image like this:
	# > sudo docker build -t <username>/dispatch --file=Dockerfile .

	# "<username>/dispatch" is a convention, you can call it whatever you want

	# To launch a container running the new image:
	# > sudo docker run -i -t <username>/dispatch

	# To launch a container running the new image with an interactive shell prompt:
	# > sudo docker run -i -t <username>/dispatch /bin/bash

	################# Begin code #######

	# Get the latest Centos version from dockerhub
	FROM quay.io/centos/centos:stream8

	MAINTAINER "dev@qpid.apache.org"

	# Install all the required packages. Some in this list were picked off from proton's INSTALL.md (https://github.com/apache/qpid-proton/blob/main/INSTALL.md) and the rest are from dispatch (https://github.com/apache/qpid-dispatch/blob/main/README)

	# Enable additional package repositories for CentOS
	# note: PowerTools is called CodeReady Linux Builder in RHEL 8
	RUN dnf -y install epel-release
	RUN dnf config-manager --set-enabled powertools

	# now install the rest of the packages
	RUN dnf -y install gcc gcc-c++ cmake libuuid-devel openssl-devel cyrus-sasl-devel cyrus-sasl-plain cyrus-sasl-gssapi cyrus-sasl-md5 swig python3-devel java-11-openjdk-devel git make doxygen valgrind emacs libuv libuv-devel libwebsockets-devel && dnf clean all -y

	# Create a main directory and clone the qpid-proton repo from github
	RUN mkdir /main && cd /main && git clone https://github.com/apache/qpid-proton.git && cd /main/qpid-proton && mkdir /main/qpid-proton/build

	WORKDIR /main/qpid-proton/build

	# make and install proton
	RUN cmake .. -DSYSINSTALL_BINDINGS=ON -DCMAKE_INSTALL_PREFIX=/usr -DSYSINSTALL_PYTHON=ON && make install

	# Clone the qpid-dispatch git repo
	RUN cd /main && git clone https://github.com/apache/qpid-dispatch.git && mkdir /main/qpid-dispatch/build

	WORKDIR /main/qpid-dispatch/build
	RUN cmake .. -DCMAKE_INSTALL_PREFIX=/usr && make install

	# Uncomment the following line if you would like to run all the dispatch unit tests and system tests.
	# RUN ctest -VV

	# Start the dispatch router
	ENTRYPOINT ["qdrouterd"]