| # This file is being maintained by Puppet. |
| # DO NOT EDIT |
| |
| # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ |
| |
| # This is the sshd server system-wide configuration file. See |
| # sshd_config(5) for more information. |
| |
| # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin |
| |
| # The strategy used for options in the default sshd_config shipped with |
| # OpenSSH is to specify options with their default value where |
| # possible, but leave them commented. Uncommented options change a |
| # default value. |
| |
| #Port 22 |
| <% @sshd_config_port_array.each do |p| -%> |
| <%= "Port #{p}" %> |
| <% end -%> |
| #Protocol 2,1 |
| Protocol 2 |
| <% if @sshd_addressfamily_real != nil -%> |
| #AddressFamily any |
| AddressFamily <%= @sshd_addressfamily_real %> |
| <% end -%> |
| <% if @sshd_listen_address.class == Array -%> |
| <% @sshd_listen_address.each do |val| -%> |
| ListenAddress <%= val %> |
| <% end -%> |
| <% elsif @sshd_listen_address.class == String -%> |
| ListenAddress <%= @sshd_listen_address %> |
| <% end -%> |
| |
| # HostKey for protocol version 1 |
| #HostKey /etc/ssh/ssh_host_key |
| # HostKeys for protocol version 2 |
| #HostKey /etc/ssh/ssh_host_rsa_key |
| #HostKey /etc/ssh/ssh_host_dsa_key |
| <% @sshd_config_hostkey_real.each do |hostkey| -%> |
| HostKey <%= hostkey %> |
| <% end -%> |
| |
| # Lifetime and size of ephemeral version 1 server key |
| #KeyRegenerationInterval 1h |
| #ServerKeyBits 1024 |
| <% if @sshd_config_serverkeybits_real != nil -%> |
| ServerKeyBits <%= @sshd_config_serverkeybits_real %> |
| <% end -%> |
| # Logging |
| # obsoletes QuietMode and FascistLogging |
| #SyslogFacility AUTH |
| SyslogFacility <%= @sshd_config_syslog_facility %> |
| #LogLevel INFO |
| LogLevel <%= @sshd_config_loglevel %> |
| |
| # Authentication: |
| |
| #LoginGraceTime 120 |
| LoginGraceTime <%= @sshd_config_login_grace_time %> |
| #PermitRootLogin yes |
| PermitRootLogin <%= @permit_root_login %> |
| #StrictModes yes |
| <% if @sshd_config_strictmodes -%> |
| StrictModes <%= @sshd_config_strictmodes %> |
| <% end -%> |
| #MaxAuthTries 6 |
| <% if @sshd_config_maxauthtries %> |
| MaxAuthTries <%= @sshd_config_maxauthtries %> |
| <% end -%> |
| |
| #RSAAuthentication yes |
| <% if @sshd_pubkeyacceptedkeytypes -%> |
| PubkeyAcceptedKeyTypes <%= @sshd_pubkeyacceptedkeytypes.join(',') %> |
| <% end -%> |
| #PubkeyAuthentication yes |
| PubkeyAuthentication <%= @sshd_pubkeyauthentication %> |
| #AuthorizedKeysFile .ssh/authorized_keys |
| <% if @sshd_config_authkey_location -%> |
| AuthorizedKeysFile <%= @sshd_config_authkey_location %> |
| <% end -%> |
| <% if @sshd_authorized_keys_command -%> |
| AuthorizedKeysCommand <%= @sshd_authorized_keys_command %> |
| <% end -%> |
| <% if @sshd_authorized_keys_command_user -%> |
| AuthorizedKeysCommandUser <%= @sshd_authorized_keys_command_user %> |
| <% end -%> |
| |
| # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts |
| #RhostsRSAAuthentication no |
| # similar for protocol version 2 |
| #HostbasedAuthentication no |
| HostbasedAuthentication <%= @sshd_hostbasedauthentication %> |
| # Change to yes if you don't trust ~/.ssh/known_hosts for |
| # RhostsRSAAuthentication and HostbasedAuthentication |
| #IgnoreUserKnownHosts no |
| IgnoreUserKnownHosts <%= @sshd_ignoreuserknownhosts %> |
| # Don't read the user's ~/.rhosts and ~/.shosts files |
| #IgnoreRhosts yes |
| IgnoreRhosts <%= @sshd_ignorerhosts %> |
| |
| # To disable tunneled clear text passwords, change to no here! |
| #PasswordAuthentication yes |
| PasswordAuthentication <%= @sshd_password_authentication %> |
| <% if @sshd_pamauthenticationviakbdint_real != nil -%> |
| # Use PAM via keyboard interactive method for authentication. |
| # Depending on the setup of pam.conf(4) this may allow tunneled clear text |
| # passwords even when PasswordAuthentication is set to no. This is dependent |
| # on what the individual modules request and is out of the control of sshd |
| # or the protocol. |
| PAMAuthenticationViaKBDInt <%= @sshd_pamauthenticationviakbdint_real %> |
| <% end -%> |
| #PermitEmptyPasswords no |
| <% if @sshd_config_permitemptypasswords != nil -%> |
| PermitEmptyPasswords <%= @sshd_config_permitemptypasswords %> |
| <% end -%> |
| |
| # Change to no to disable s/key passwords |
| #ChallengeResponseAuthentication yes |
| ChallengeResponseAuthentication <%= @sshd_config_challenge_resp_auth %> |
| |
| # Kerberos options |
| <% if @sshd_kerberos_authentication != nil -%> |
| #KerberosAuthentication no |
| KerberosAuthentication <%= @sshd_kerberos_authentication %> |
| <% end -%> |
| #KerberosOrLocalPasswd yes |
| #KerberosTicketCleanup yes |
| #KerberosGetAFSToken no |
| |
| # GSSAPI options |
| #GSSAPIAuthentication no |
| GSSAPIAuthentication <%= @sshd_gssapiauthentication %> |
| <% if @sshd_gssapikeyexchange_real != nil -%> |
| GSSAPIKeyExchange <%= @sshd_gssapikeyexchange_real %> |
| <% end -%> |
| <% if @sshd_gssapicleanupcredentials_real != nil -%> |
| #GSSAPICleanupCredentials yes |
| GSSAPICleanupCredentials <%= @sshd_gssapicleanupcredentials_real %> |
| <% end -%> |
| |
| <% if @sshd_use_pam_real != nil -%> |
| # Set this to 'yes' to enable PAM authentication, account processing, |
| # and session processing. If this is enabled, PAM authentication will |
| # be allowed through the ChallengeResponseAuthentication mechanism. |
| # Depending on your PAM configuration, this may bypass the setting of |
| # PasswordAuthentication, PermitEmptyPasswords, and |
| # "PermitRootLogin without-password". If you just want the PAM account and |
| # session checks to run without PAM authentication, then enable this but set |
| # ChallengeResponseAuthentication=no |
| #UsePAM no |
| UsePAM <%= @sshd_use_pam_real %> |
| <% end -%> |
| |
| <% if @sshd_acceptenv_real == true -%> |
| # Accept locale-related environment variables |
| AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES |
| AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT |
| AcceptEnv LC_IDENTIFICATION LC_ALL |
| <% end -%> |
| #AllowTcpForwarding yes |
| AllowTcpForwarding <%= @sshd_allow_tcp_forwarding %> |
| #GatewayPorts no |
| #X11Forwarding no |
| X11Forwarding <%= @sshd_x11_forwarding %> |
| #X11DisplayOffset 10 |
| #X11UseLocalhost yes |
| X11UseLocalhost <%= @sshd_x11_use_localhost %> |
| #PrintMotd yes |
| PrintMotd <%= @sshd_config_print_motd %> |
| #PrintLastLog yes |
| <% if @sshd_config_print_last_log != nil -%> |
| PrintLastLog <%= @sshd_config_print_last_log %> |
| <% end -%> |
| #TCPKeepAlive yes |
| <% if @sshd_config_tcp_keepalive_real != nil -%> |
| TCPKeepAlive <%= @sshd_config_tcp_keepalive_real %> |
| <% end -%> |
| #UseLogin no |
| #UsePrivilegeSeparation yes |
| <% if @sshd_config_use_privilege_separation != nil -%> |
| UsePrivilegeSeparation <%= @sshd_config_use_privilege_separation %> |
| <% end -%> |
| #PermitUserEnvironment no |
| <% if @sshd_config_permituserenvironment != nil -%> |
| PermitUserEnvironment <%= @sshd_config_permituserenvironment %> |
| <% end -%> |
| #Compression delayed |
| <% if @sshd_config_compression != nil -%> |
| Compression <%= @sshd_config_compression %> |
| <% end -%> |
| #ClientAliveInterval 0 |
| ClientAliveInterval <%= @sshd_client_alive_interval %> |
| ClientAliveCountMax <%= @sshd_client_alive_count_max %> |
| #ShowPatchLevel no |
| <% if @sshd_config_use_dns_real != nil -%> |
| #UseDNS yes |
| UseDNS <%= @sshd_config_use_dns_real %> |
| <% end -%> |
| #PidFile /var/run/sshd.pid |
| <% if @sshd_config_maxstartups -%> |
| MaxStartups <%= @sshd_config_maxstartups %> |
| <% else -%> |
| #MaxStartups 10:30:100 |
| <% end -%> |
| <% if @sshd_config_maxsessions_integer != nil -%> |
| MaxSessions <%= @sshd_config_maxsessions_integer %> |
| <% else -%> |
| #MaxSessions 10 |
| <% end -%> |
| |
| #PermitTunnel no |
| <% if @sshd_config_permittunnel_real != nil -%> |
| PermitTunnel <%= @sshd_config_permittunnel_real %> |
| <% end -%> |
| <% if @sshd_config_chrootdirectory -%> |
| ChrootDirectory <%= @sshd_config_chrootdirectory %> |
| <% else -%> |
| #ChrootDirectory none |
| <% end -%> |
| <% if @sshd_config_forcecommand -%> |
| ForceCommand <%= @sshd_config_forcecommand %> |
| <% end -%> |
| |
| # no default banner path |
| #Banner none |
| Banner <%= @sshd_config_banner %> |
| |
| <% if @sshd_config_xauth_location_real -%> |
| #XAuthLocation /usr/bin/xauth |
| XAuthLocation <%= @sshd_config_xauth_location_real %> |
| |
| <% end -%> |
| # override default of no subsystems |
| Subsystem sftp <%= @sshd_config_subsystem_sftp_real %> |
| |
| <% if @sshd_config_ciphers -%> |
| Ciphers <%= @sshd_config_ciphers.join(',') %> |
| <% end -%> |
| <% if @sshd_config_kexalgorithms -%> |
| KexAlgorithms <%= @sshd_config_kexalgorithms.join(',') %> |
| <% end -%> |
| <% if @sshd_config_macs -%> |
| MACs <%= @sshd_config_macs.join(',') %> |
| <% end -%> |
| <% if @sshd_config_denyusers_real != [] -%> |
| DenyUsers <%= @sshd_config_denyusers_real.join(' ') %> |
| <% end -%> |
| <% if @sshd_config_denygroups_real != [] -%> |
| DenyGroups <%= @sshd_config_denygroups_real.join(' ') %> |
| <% end -%> |
| <% if @sshd_config_allowusers_real != [] -%> |
| AllowUsers <%= @sshd_config_allowusers_real.join(' ') %> |
| <% end -%> |
| <% if @sshd_config_allowgroups_real != [] -%> |
| AllowGroups <%= @sshd_config_allowgroups_real.join(' ') %> |
| <% end -%> |
| <% if @sshd_config_match -%> |
| |
| <% @sshd_config_match.sort.each do |key, hash| -%> |
| Match <%= key %> |
| <% hash.sort.each do |values| -%> |
| <%= values %> |
| <% end -%> |
| <% end -%> |
| <% end -%> |
| <% if @sshd_config_hostcertificate_real.class == Array -%> |
| <% @sshd_config_hostcertificate_real.each do |cert| -%> |
| HostCertificate <%= cert %> |
| <% end -%> |
| <% elsif @sshd_config_hostcertificate_real.class == String -%> |
| HostCertificate <%= @sshd_config_hostcertificate_real %> |
| <% end -%> |
| <% if @sshd_config_trustedusercakeys_real -%> |
| TrustedUserCAKeys <%= @sshd_config_trustedusercakeys_real %> |
| <% end -%> |
| <% if @sshd_config_authorized_principals_file_real -%> |
| AuthorizedPrincipalsFile <%= @sshd_config_authorized_principals_file_real %> |
| <% end -%> |
