| |
| # Collect AWS EC2 custom tags as agent tags |
| collect_ec2_tags: <%= @collect_ec2_tags %> |
| |
| # Collect instance metadata |
| # The Agent will try to collect instance metadata for EC2 and GCE instances by |
| # trying to connect to the local endpoint: http://169.254.169.254 |
| # See http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/AESDG-chapter-instancedata.html |
| # and https://developers.google.com/compute/docs/metadata |
| # for more information |
| collect_instance_metadata: <%= @collect_instance_metadata %> |
| |
| # Set the threshold for accepting points to allow anything |
| # with recent_point_threshold seconds |
| # Defaults to 30 seconds if no value is provided |
| |
| <% if @recent_point_threshold.empty? -%> |
| # recent_point_threshold: 30 |
| <% else -%> |
| recent_point_threshold: <%= @recent_point_threshold %> |
| <% end -%> |
| |
| # Change port the Agent is listening to |
| <% if @listen_port.empty? -%> |
| # listen_port: 17123 |
| <% else -%> |
| listen_port: <%= @listen_port %> |
| <% end -%> |
| |
| # Start a graphite listener on this port |
| <% if @graphite_listen_port.empty? -%> |
| # graphite_listen_port: 17124 |
| <% else -%> |
| graphite_listen_port: <%= @graphite_listen_port %> |
| <% end -%> |
| |
| # Additional directory to look for Datadog checks |
| <% if @additional_checksd.empty? -%> |
| # additional_checksd: /etc/dd-agent/checks.d/ |
| <% else -%> |
| additional_checksd: <%= @additional_checksd %> |
| <% end -%> |
| |
| # Allow non-local traffic to this Agent |
| # This is required when using this Agent as a proxy for other Agents |
| # that might not have an internet connection |
| # For more information, please see |
| # https://github.com/DataDog/dd-agent/wiki/Network-Traffic-and-Proxy-Configuration |
| non_local_traffic: <%= @non_local_traffic %> |
| |
| # Select the Tornado HTTP Client in the forwarder |
| # Default to the simple http client |
| use_curl_http_client: <%= @use_curl_http_client %> |
| |
| # The loopback address the Forwarder and Dogstatsd will bind. |
| # Optional, it is mainly used when running the agent on Openshift |
| <% if @bind_host.empty? -%> |
| # bind_host: localhost |
| <% else -%> |
| bind_host: <%= @bind_host %> |
| <% end -%> |
| |
| # Sets how often checks should be run. |
| <% if @check_freq.empty? -%> |
| # check_freq: 15 |
| <% else -%> |
| check_freq: <%= @check_freq %> |
| <% end -%> |
| |
| |
| # ========================================================================== # |
| # Pup configuration |
| # ========================================================================== # |
| |
| # Pup is a small server that displays metric data collected by the Agent. |
| # Think of it as a fancy status page or a toe dip into the world of |
| # datadog. It can be connected to on the port below. |
| |
| use_pup: <%= @use_pup ? "yes" : "no" %> |
| |
| <% if @pup_port.empty? -%> |
| # pup_port: 17125 |
| <% else -%> |
| pup_port: <%= @pup_port %> |
| <% end -%> |
| |
| <% if @pup_interface.empty? -%> |
| # pup_interface: localhost |
| <% else -%> |
| pup_interface: <%= @pup_interface %> |
| <% end -%> |
| |
| <% if @pup_url.empty? -%> |
| # pup_url: http://localhost:17125 |
| <% else -%> |
| pup_url: <%= @pup_url %> |
| <% end -%> |
| |
| # ========================================================================== # |
| # DogStatsd configuration # |
| # ========================================================================== # |
| |
| # If you don't want to enable the DogStatsd server, set this option to no |
| |
| use_dogstatsd: <%= @use_dogstatsd ? "yes" : "no" %> |
| # DogStatsd is a small server that aggregates your custom app metrics. For |
| # usage information, check out http://api.datadoghq.com |
| |
| # Make sure your client is sending to the same port. |
| <% if @dogstatsd_port.nil? -%> |
| # dogstatsd_port: 8125 |
| <% else -%> |
| dogstatsd_port: <%= @dogstatsd_port %> |
| <% end -%> |
| |
| # By default dogstatsd will post aggregate metrics to the Agent (which handles |
| # errors/timeouts/retries/etc). To send directly to the datadog api, set this |
| # to https://app.datadoghq.com. |
| <% if @dogstatsd_target.empty? -%> |
| # dogstatsd_target: http://localhost:17123 |
| <% else -%> |
| dogstatsd_target: <%= @dogstatsd_target %> |
| <% end -%> |
| |
| ## The dogstatsd flush period. |
| <% if @dogstatsd_interval.empty? -%> |
| # dogstatsd_interval: 10 |
| <% else -%> |
| dogstatsd_interval: <%= @dogstatsd_interval -%> |
| <% end -%> |
| |
| ## If 'yes', counters and rates will be normalized to 1 second (that is divided |
| ## by the dogstatsd_interval) before being sent to the server. Defaults to 'yes' |
| dogstatsd_normalize: <%= @dogstatsd_normalize ? "yes" : "no" %> |
| |
| histogram_percentiles: <%= @statsd_histogram_percentiles %> |
| |
| # If you want to forward every packet received by the dogstatsd server |
| # to another statsd server, uncomment these lines. |
| # WARNING: Make sure that forwarded packets are regular statsd packets and not "dogstatsd" packets, |
| # as your other statsd server might not be able to handle them. |
| <% if @statsd_forward_host.empty? -%> |
| # statsd_forward_host: address_of_own_statsd_server |
| <% else -%> |
| statsd_forward_host: <%= @statsd_forward_host %> |
| <% end -%> |
| <% if @statsd_forward_port.empty? -%> |
| # statsd_forward_port: 8125 |
| <% else -%> |
| statsd_forward_port: <%= @statsd_forward_port %> |
| <% end -%> |
| |
| # ========================================================================== # |
| # Service-specific configuration # |
| # ========================================================================== # |
| |
| # -------------------------------------------------------------------------- # |
| # Disk # |
| # -------------------------------------------------------------------------- # |
| |
| # Some infrastrucures have many constantly changing virtual devices (e.g. folks |
| # running constantly churning linux containers) whose metrics aren't |
| # interesting for datadog. To filter out a particular pattern of devices |
| # from collection, configure a regex here: |
| |
| <% if @device_blacklist_re.empty? -%> |
| # device_blacklist_re: .*\/dev\/mapper\/lxc-box.* |
| <% else -%> |
| device_blacklist_re: <%= @device_blacklist_re %> |
| <% end -%> |
| |
| # -------------------------------------------------------------------------- # |
| # Ganglia # |
| # -------------------------------------------------------------------------- # |
| |
| <% if @ganglia_host.empty? -%> |
| # Ganglia host where gmetad is running |
| # ganglia_host: localhost |
| # |
| # Ganglia port where gmetad is running |
| # ganglia_port: 8651 |
| <% else -%> |
| # Ganglia host where gmetad is running |
| ganglia_host: <%= @ganglia_host %> |
| |
| # Ganglia port where gmetad is running |
| ganglia_port: <%= @ganglia_port %> |
| <% end -%> |
| |
| |
| # -------------------------------------------------------------------------- # |
| # Dogstream (log file parser) |
| # -------------------------------------------------------------------------- # |
| |
| # Comma-separated list of logs to parse and optionally custom parsers to use. |
| # The form should look like this: |
| # |
| # dogstreams: /path/to/log1:parsers_module:custom_parser, /path/to/log2, /path/to/log3, ... |
| # |
| # Or this: |
| # |
| # dogstreams: /path/to/log1:/path/to/my/parsers_module.py:custom_parser, /path/to/log2, /path/to/log3, ... |
| # |
| # Each entry is a path to a log file and optionally a Python module/function pair |
| # separated by colons. |
| # |
| # Custom parsers should take a 2 parameters, a logger object and |
| # a string parameter of the current line to parse. It should return a tuple of |
| # the form: |
| # (metric (str), timestamp (unix timestamp), value (float), attributes (dict)) |
| # where attributes should at least contain the key 'metric_type', specifying |
| # whether the given metric is a 'counter' or 'gauge'. |
| # |
| # Unless parsers are specified with an absolute path, the modules must exist in |
| # the Agent's PYTHONPATH. You can set this as an environment variable when |
| # starting the Agent. If the name of the custom parser function is not passed, |
| # 'parser' is assumed. |
| # |
| # If this value isn't specified, the default parser assumes this log format: |
| # metric timestamp value key0=val0 key1=val1 ... |
| # |
| <% |
| if not @dogstreams.empty? |
| -%> |
| dogstreams: <%= @dogstreams.join(', ') %> |
| <% end -%> |
| |
| # ========================================================================== # |
| # Custom Emitters # |
| # ========================================================================== # |
| |
| # Comma-separated list of emitters to be used in addition to the standard one |
| # |
| # Expected to be passed as a comma-separated list of colon-delimited |
| # name/object pairs. |
| # |
| <% if @custom_emitters.empty? -%> |
| # custom_emitters: /usr/local/my-code/emitters/rabbitmq.py:RabbitMQEmitter |
| <% else -%> |
| custom_emitters: <%= @custom_emitters %> |
| <% end -%> |
| # |
| # If the name of the emitter function is not specified, 'emitter' is assumed. |
| |
| |
| # ========================================================================== # |
| # Logging |
| # ========================================================================== # |
| |
| log_level: <%= @_loglevel %> |
| |
| <% if @collector_log_file.empty? -%> |
| # collector_log_file: /var/log/datadog/collector.log |
| <% else -%> |
| collector_log_file: <%= @collector_log_file %> |
| <% end -%> |
| |
| <% if @forwarder_log_file.empty? -%> |
| # forwarder_log_file: /var/log/datadog/forwarder.log |
| <% else -%> |
| forwarder_log_file: <%= @forwarder_log_file %> |
| <% end -%> |
| |
| <% if @dogstatsd_log_file.empty? -%> |
| # dogstatsd_log_file: /var/log/datadog/dogstatsd.log |
| <% else -%> |
| dogstatsd_log_file: <%= @dogstatsd_log_file %> |
| <% end -%> |
| |
| <% if @pup_log_file.empty? -%> |
| # pup_log_file: /var/log/datadog/pup.log |
| <% else -%> |
| pup_log_file: <%= @pup_log_file %> |
| <% end -%> |
| |
| |
| # if syslog is enabled but a host and port are not set, a local domain socket |
| # connection will be attempted |
| # |
| log_to_syslog: <%= @log_to_syslog ? "yes" : "no" %> |
| <% if @syslog_host.empty? -%> |
| # syslog_host: |
| <% else -%> |
| syslog_host: <%= @syslog_host %> |
| <% end -%> |
| |
| <% if @syslog_port.empty? -%> |
| # syslog_port: |
| <% else -%> |
| syslog_port: <%= @syslog_port %> |
| <% end -%> |
| |
| <% if not @extra_template.empty? -%> |
| # ========================================================================== # |
| # Custom Templates from Puppet # |
| # ========================================================================== # |
| |
| <% end -%> |