pulsar-client-cpp/include/pulsar/ClientConfiguration.h - pulsar - Git at Google

 /**
  * Licensed to the Apache Software Foundation (ASF) under one
  * or more contributor license agreements.  See the NOTICE file
  * distributed with this work for additional information
  * regarding copyright ownership.  The ASF licenses this file
  * to you under the Apache License, Version 2.0 (the
  * "License"); you may not use this file except in compliance
  * with the License.  You may obtain a copy of the License at
  *
  *   http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing,
  * software distributed under the License is distributed on an
  * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
  * KIND, either express or implied.  See the License for the
  * specific language governing permissions and limitations
  * under the License.
  */
 #ifndef PULSAR_CLIENTCONFIGURATION_H_
 #define PULSAR_CLIENTCONFIGURATION_H_

 #include <pulsar/defines.h>
 #include <pulsar/Authentication.h>
 #include <pulsar/Logger.h>

 namespace pulsar {
 class PulsarWrapper;
 struct ClientConfigurationImpl;
 class PULSAR_PUBLIC ClientConfiguration {
    public:
     ClientConfiguration();
     ~ClientConfiguration();
     ClientConfiguration(const ClientConfiguration&);
     ClientConfiguration& operator=(const ClientConfiguration&);

     /**
      * Configure a limit on the amount of memory that will be allocated by this client instance.
      * Setting this to 0 will disable the limit. By default this is disabled.
      *
      * @param memoryLimitBytes the memory limit
      */
     ClientConfiguration& setMemoryLimit(uint64_t memoryLimitBytes);

     /**
      * @return the client memory limit in bytes
      */
     uint64_t getMemoryLimit() const;

     /**
      * Set the authentication method to be used with the broker
      *
      * @param authentication the authentication data to use
      */
     ClientConfiguration& setAuth(const AuthenticationPtr& authentication);

     /**
      * @return the authentication data
      */
     Authentication& getAuth() const;

     /**
      * Set timeout on client operations (subscribe, create producer, close, unsubscribe)
      * Default is 30 seconds.
      *
      * @param timeout the timeout after which the operation will be considered as failed
      */
     ClientConfiguration& setOperationTimeoutSeconds(int timeout);

     /**
      * @return the client operations timeout in seconds
      */
     int getOperationTimeoutSeconds() const;

     /**
      * Set the number of IO threads to be used by the Pulsar client. Default is 1
      * thread.
      *
      * @param threads number of threads
      */
     ClientConfiguration& setIOThreads(int threads);

     /**
      * @return the number of IO threads to use
      */
     int getIOThreads() const;

     /**
      * Set the number of threads to be used by the Pulsar client when delivering messages
      * through message listener. Default is 1 thread per Pulsar client.
      *
      * If using more than 1 thread, messages for distinct MessageListener will be
      * delivered in different threads, however a single MessageListener will always
      * be assigned to the same thread.
      *
      * @param threads number of threads
      */
     ClientConfiguration& setMessageListenerThreads(int threads);

     /**
      * @return the number of IO threads to use
      */
     int getMessageListenerThreads() const;

     /**
      * Number of concurrent lookup-requests allowed on each broker-connection to prevent overload on broker.
      * <i>(default: 50000)</i> It should be configured with higher value only in case of it requires to
      * produce/subscribe on
      * thousands of topic using created {@link PulsarClient}
      *
      * @param concurrentLookupRequest
      */
     ClientConfiguration& setConcurrentLookupRequest(int concurrentLookupRequest);

     /**
      * @return Get configured total allowed concurrent lookup-request.
      */
     int getConcurrentLookupRequest() const;

     /**
      * Initialize the log configuration
      *
      * @param logConfFilePath  path of the configuration file
      * @deprecated
      */
     ClientConfiguration& setLogConfFilePath(const std::string& logConfFilePath);

     /**
      * Get the path of log configuration file (log4cpp)
      */
     const std::string& getLogConfFilePath() const;

     /**
      * Configure a custom logger backend to route of Pulsar client library
      * to a different logger implementation.
      *
      * By default, log messages are printed on standard output.
      *
      * When passed in, the configuration takes ownership of the loggerFactory object.
      * The logger factory can only be set once per process. Any subsequent calls to
      * set the logger factory will have no effect, though the logger factory object
      * will be cleaned up.
      */
     ClientConfiguration& setLogger(LoggerFactory* loggerFactory);

     /**
      * Configure whether to use the TLS encryption on the connections.
      *
      * The default value is false.
      *
      * @param useTls
      */
     ClientConfiguration& setUseTls(bool useTls);

     /**
      * @return whether the TLS encryption is used on the connections
      */
     bool isUseTls() const;

     /**
      * Set the path to the trusted TLS certificate file.
      *
      * @param tlsTrustCertsFilePath
      */
     ClientConfiguration& setTlsTrustCertsFilePath(const std::string& tlsTrustCertsFilePath);

     /**
      * @return the path to the trusted TLS certificate file
      */
     const std::string& getTlsTrustCertsFilePath() const;

     /**
      * Configure whether the Pulsar client accepts untrusted TLS certificates from brokers.
      *
      * The default value is false.
      *
      * @param tlsAllowInsecureConnection
      */
     ClientConfiguration& setTlsAllowInsecureConnection(bool allowInsecure);

     /**
      * @return whether the Pulsar client accepts untrusted TLS certificates from brokers
      */
     bool isTlsAllowInsecureConnection() const;

     /**
      * Configure whether it allows validating hostname verification when a client connects to a broker over
      * TLS.
      *
      * It validates the incoming x509 certificate and matches the provided hostname (CN/SAN) with the
      * expected broker's hostname. It follows the server identity hostname verification in RFC 2818.
      *
      * The default value is false.
      *
      * @see [RFC 2818](https://tools.ietf.org/html/rfc2818).
      *
      * @param validateHostName whether to enable the TLS hostname verification
      */
     ClientConfiguration& setValidateHostName(bool validateHostName);

     /**
      * @return true if the TLS hostname verification is enabled
      */
     bool isValidateHostName() const;

     /**
      * Configure the listener name that the broker returns the corresponding `advertisedListener`.
      *
      * @param name the listener name
      */
     ClientConfiguration& setListenerName(const std::string& listenerName);

     /**
      * @return the listener name for the broker
      */
     const std::string& getListenerName() const;

     /**
      * Initialize stats interval in seconds. Stats are printed and reset after every `statsIntervalInSeconds`.
      *
      * Default: 600
      *
      * Set to 0 means disabling stats collection.
      */
     ClientConfiguration& setStatsIntervalInSeconds(const unsigned int&);

     /**
      * @return the stats interval configured for the client
      */
     const unsigned int& getStatsIntervalInSeconds() const;

     /**
      * Set partitions update interval in seconds.
      * If a partitioned topic is produced or subscribed and `intervalInSeconds` is not 0, every
      * `intervalInSeconds` seconds the partition number will be retrieved by sending lookup requests. If
      * partition number has been increased, more producer/consumer of increased partitions will be created.
      * Default is 60 seconds.
      *
      * @param intervalInSeconds the seconds between two lookup request for partitioned topic's metadata
      */
     ClientConfiguration& setPartititionsUpdateInterval(unsigned int intervalInSeconds);

     /**
      * Get partitions update interval in seconds.
      */
     unsigned int getPartitionsUpdateInterval() const;

     /**
      * Set the duration of time to wait for a connection to a broker to be established. If the duration passes
      * without a response from the broker, the connection attempt is dropped.
      *
      * Default: 10000
      *
      * @param timeoutMs the duration in milliseconds
      * @return
      */
     ClientConfiguration& setConnectionTimeout(int timeoutMs);

     /**
      * The getter associated with setConnectionTimeout().
      */
     int getConnectionTimeout() const;

     friend class ClientImpl;
     friend class PulsarWrapper;

    private:
     const AuthenticationPtr& getAuthPtr() const;
     std::shared_ptr<ClientConfigurationImpl> impl_;
 };
 }  // namespace pulsar

 #endif /* PULSAR_CLIENTCONFIGURATION_H_ */
	/**
	* Licensed to the Apache Software Foundation (ASF) under one
	* or more contributor license agreements. See the NOTICE file
	* distributed with this work for additional information
	* regarding copyright ownership. The ASF licenses this file
	* to you under the Apache License, Version 2.0 (the
	* "License"); you may not use this file except in compliance
	* with the License. You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing,
	* software distributed under the License is distributed on an
	* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
	* KIND, either express or implied. See the License for the
	* specific language governing permissions and limitations
	* under the License.
	*/
	#ifndef PULSAR_CLIENTCONFIGURATION_H_
	#define PULSAR_CLIENTCONFIGURATION_H_

	#include <pulsar/defines.h>
	#include <pulsar/Authentication.h>
	#include <pulsar/Logger.h>

	namespace pulsar {
	class PulsarWrapper;
	struct ClientConfigurationImpl;
	class PULSAR_PUBLIC ClientConfiguration {
	public:
	ClientConfiguration();
	~ClientConfiguration();
	ClientConfiguration(const ClientConfiguration&);
	ClientConfiguration& operator=(const ClientConfiguration&);

	/**
	* Configure a limit on the amount of memory that will be allocated by this client instance.
	* Setting this to 0 will disable the limit. By default this is disabled.
	*
	* @param memoryLimitBytes the memory limit
	*/
	ClientConfiguration& setMemoryLimit(uint64_t memoryLimitBytes);

	/**
	* @return the client memory limit in bytes
	*/
	uint64_t getMemoryLimit() const;

	/**
	* Set the authentication method to be used with the broker
	*
	* @param authentication the authentication data to use
	*/
	ClientConfiguration& setAuth(const AuthenticationPtr& authentication);

	/**
	* @return the authentication data
	*/
	Authentication& getAuth() const;

	/**
	* Set timeout on client operations (subscribe, create producer, close, unsubscribe)
	* Default is 30 seconds.
	*
	* @param timeout the timeout after which the operation will be considered as failed
	*/
	ClientConfiguration& setOperationTimeoutSeconds(int timeout);

	/**
	* @return the client operations timeout in seconds
	*/
	int getOperationTimeoutSeconds() const;

	/**
	* Set the number of IO threads to be used by the Pulsar client. Default is 1
	* thread.
	*
	* @param threads number of threads
	*/
	ClientConfiguration& setIOThreads(int threads);

	/**
	* @return the number of IO threads to use
	*/
	int getIOThreads() const;

	/**
	* Set the number of threads to be used by the Pulsar client when delivering messages
	* through message listener. Default is 1 thread per Pulsar client.
	*
	* If using more than 1 thread, messages for distinct MessageListener will be
	* delivered in different threads, however a single MessageListener will always
	* be assigned to the same thread.
	*
	* @param threads number of threads
	*/
	ClientConfiguration& setMessageListenerThreads(int threads);

	/**
	* @return the number of IO threads to use
	*/
	int getMessageListenerThreads() const;

	/**
	* Number of concurrent lookup-requests allowed on each broker-connection to prevent overload on broker.
	* <i>(default: 50000)</i> It should be configured with higher value only in case of it requires to
	* produce/subscribe on
	* thousands of topic using created {@link PulsarClient}
	*
	* @param concurrentLookupRequest
	*/
	ClientConfiguration& setConcurrentLookupRequest(int concurrentLookupRequest);

	/**
	* @return Get configured total allowed concurrent lookup-request.
	*/
	int getConcurrentLookupRequest() const;

	/**
	* Initialize the log configuration
	*
	* @param logConfFilePath path of the configuration file
	* @deprecated
	*/
	ClientConfiguration& setLogConfFilePath(const std::string& logConfFilePath);

	/**
	* Get the path of log configuration file (log4cpp)
	*/
	const std::string& getLogConfFilePath() const;

	/**
	* Configure a custom logger backend to route of Pulsar client library
	* to a different logger implementation.
	*
	* By default, log messages are printed on standard output.
	*
	* When passed in, the configuration takes ownership of the loggerFactory object.
	* The logger factory can only be set once per process. Any subsequent calls to
	* set the logger factory will have no effect, though the logger factory object
	* will be cleaned up.
	*/
	ClientConfiguration& setLogger(LoggerFactory* loggerFactory);

	/**
	* Configure whether to use the TLS encryption on the connections.
	*
	* The default value is false.
	*
	* @param useTls
	*/
	ClientConfiguration& setUseTls(bool useTls);

	/**
	* @return whether the TLS encryption is used on the connections
	*/
	bool isUseTls() const;

	/**
	* Set the path to the trusted TLS certificate file.
	*
	* @param tlsTrustCertsFilePath
	*/
	ClientConfiguration& setTlsTrustCertsFilePath(const std::string& tlsTrustCertsFilePath);

	/**
	* @return the path to the trusted TLS certificate file
	*/
	const std::string& getTlsTrustCertsFilePath() const;

	/**
	* Configure whether the Pulsar client accepts untrusted TLS certificates from brokers.
	*
	* The default value is false.
	*
	* @param tlsAllowInsecureConnection
	*/
	ClientConfiguration& setTlsAllowInsecureConnection(bool allowInsecure);

	/**
	* @return whether the Pulsar client accepts untrusted TLS certificates from brokers
	*/
	bool isTlsAllowInsecureConnection() const;

	/**
	* Configure whether it allows validating hostname verification when a client connects to a broker over
	* TLS.
	*
	* It validates the incoming x509 certificate and matches the provided hostname (CN/SAN) with the
	* expected broker's hostname. It follows the server identity hostname verification in RFC 2818.
	*
	* The default value is false.
	*
	* @see [RFC 2818](https://tools.ietf.org/html/rfc2818).
	*
	* @param validateHostName whether to enable the TLS hostname verification
	*/
	ClientConfiguration& setValidateHostName(bool validateHostName);

	/**
	* @return true if the TLS hostname verification is enabled
	*/
	bool isValidateHostName() const;

	/**
	* Configure the listener name that the broker returns the corresponding `advertisedListener`.
	*
	* @param name the listener name
	*/
	ClientConfiguration& setListenerName(const std::string& listenerName);

	/**
	* @return the listener name for the broker
	*/
	const std::string& getListenerName() const;

	/**
	* Initialize stats interval in seconds. Stats are printed and reset after every `statsIntervalInSeconds`.
	*
	* Default: 600
	*
	* Set to 0 means disabling stats collection.
	*/
	ClientConfiguration& setStatsIntervalInSeconds(const unsigned int&);

	/**
	* @return the stats interval configured for the client
	*/
	const unsigned int& getStatsIntervalInSeconds() const;

	/**
	* Set partitions update interval in seconds.
	* If a partitioned topic is produced or subscribed and `intervalInSeconds` is not 0, every
	* `intervalInSeconds` seconds the partition number will be retrieved by sending lookup requests. If
	* partition number has been increased, more producer/consumer of increased partitions will be created.
	* Default is 60 seconds.
	*
	* @param intervalInSeconds the seconds between two lookup request for partitioned topic's metadata
	*/
	ClientConfiguration& setPartititionsUpdateInterval(unsigned int intervalInSeconds);

	/**
	* Get partitions update interval in seconds.
	*/
	unsigned int getPartitionsUpdateInterval() const;

	/**
	* Set the duration of time to wait for a connection to a broker to be established. If the duration passes
	* without a response from the broker, the connection attempt is dropped.
	*
	* Default: 10000
	*
	* @param timeoutMs the duration in milliseconds
	* @return
	*/
	ClientConfiguration& setConnectionTimeout(int timeoutMs);

	/**
	* The getter associated with setConnectionTimeout().
	*/
	int getConnectionTimeout() const;

	friend class ClientImpl;
	friend class PulsarWrapper;

	private:
	const AuthenticationPtr& getAuthPtr() const;
	std::shared_ptr<ClientConfigurationImpl> impl_;
	};
	} // namespace pulsar

	#endif /* PULSAR_CLIENTCONFIGURATION_H_ */