| /* |
| * Copyright 2015-2016 IBM Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package whisk.core.cli.test |
| |
| import java.time.Instant |
| import scala.concurrent.duration._ |
| import org.junit.runner.RunWith |
| import org.scalatest.BeforeAndAfterAll |
| import org.scalatest.junit.JUnitRunner |
| import common.TestHelpers |
| import common.TestUtils._ |
| import common.TestUtils |
| import common.WhiskProperties |
| import common.Wsk |
| import common.WskAdmin |
| import common.WskProps |
| import common.WskTestHelpers |
| |
| /** |
| * Tests for testing the CLI "api" subcommand. Most of these tests require a deployed backend. |
| */ |
| @RunWith(classOf[JUnitRunner]) |
| class ApiGwTests |
| extends TestHelpers |
| with WskTestHelpers |
| with BeforeAndAfterAll { |
| |
| implicit val wskprops = WskProps() |
| val wsk = new Wsk |
| val (cliuser, clinamespace) = WskAdmin.getUser(wskprops.authKey) |
| |
| // This test suite makes enough CLI invocations in 60 seconds to trigger the OpenWhisk |
| // throttling restriction. To avoid CLI failures due to being throttled, track the |
| // CLI invocation calls and when at the throttle limit, pause the next CLI invocation |
| // with exactly enough time to relax the throttling. |
| val throttleWindow = 1.minute |
| var cliCallCount = 5 // Set to >0 to allow for other action invocations in prior tests |
| var clearedThrottleTime = Instant.now |
| val maxActionsPerMin = WhiskProperties.getMaxActionInvokesPerMinute() |
| |
| /** |
| * Expected to be called before or after each CLI invocation |
| * If number of CLI invocations in this suite have reached the throttle limit |
| * then pause the test for enough time so that the throttle restriction is gone |
| */ |
| def checkThrottle() = { |
| // If the # CLI calls at the throttle limit, then wait enough time to avoid the CLI being blocked |
| cliCallCount += 1 |
| if ( cliCallCount > maxActionsPerMin ) { |
| println(s"Action invokes ${cliCallCount} exceeds per minute thottle limit of ${maxActionsPerMin}") |
| val waitedAlready = Duration.fromNanos(java.time.Duration.between(clearedThrottleTime, Instant.now).toNanos) |
| settleThrottle(waitedAlready) |
| cliCallCount = 0 |
| clearedThrottleTime = Instant.now |
| } |
| } |
| |
| /** |
| * Settles throttles of 1 minute. Waits up to 1 minute depending on the time already waited. |
| * |
| * @param waitedAlready the time already gone after the last invoke or fire |
| */ |
| def settleThrottle(waitedAlready: FiniteDuration) = { |
| val timeToWait = (throttleWindow - waitedAlready).max(Duration.Zero) |
| println(s"Waiting for ${timeToWait.toSeconds} seconds, already waited for ${waitedAlready.toSeconds} seconds") |
| Thread.sleep(timeToWait.toMillis) |
| } |
| |
| /* |
| * Forcibly clear the throttle so that downstream tests are not affected by |
| * this test suite |
| */ |
| override def afterAll() = { |
| // If this test suite is exiting with over 30 action invocations since the last throttle clearing, clear the throttle |
| if (cliCallCount > 30) { |
| val waitedAlready = Duration.fromNanos(java.time.Duration.between(clearedThrottleTime, Instant.now).toNanos) |
| settleThrottle(waitedAlready) |
| } |
| } |
| |
| def apiCreate( |
| basepath: Option[String] = None, |
| relpath: Option[String] = None, |
| operation: Option[String] = None, |
| action: Option[String] = None, |
| apiname: Option[String] = None, |
| swagger: Option[String] = None, |
| expectedExitCode: Int = SUCCESS_EXIT): RunResult = { |
| checkThrottle() |
| wsk.api.create(basepath, relpath, operation, action, apiname, swagger, expectedExitCode) |
| } |
| |
| def apiList( |
| basepathOrApiName: Option[String] = None, |
| relpath: Option[String] = None, |
| operation: Option[String] = None, |
| limit: Option[Int] = None, |
| since: Option[Instant] = None, |
| full: Option[Boolean] = None, |
| expectedExitCode: Int = SUCCESS_EXIT): RunResult = { |
| checkThrottle() |
| wsk.api.list(basepathOrApiName, relpath, operation, limit, since, full, expectedExitCode) |
| } |
| |
| def apiGet( |
| basepathOrApiName: Option[String] = None, |
| full: Option[Boolean] = None, |
| expectedExitCode: Int = SUCCESS_EXIT): RunResult = { |
| checkThrottle() |
| wsk.api.get(basepathOrApiName, full, expectedExitCode) |
| } |
| |
| def apiDelete( |
| basepathOrApiName: String, |
| relpath: Option[String] = None, |
| operation: Option[String] = None, |
| expectedExitCode: Int = SUCCESS_EXIT): RunResult = { |
| checkThrottle() |
| wsk.api.delete(basepathOrApiName, relpath, operation, expectedExitCode) |
| } |
| |
| behavior of "Wsk api" |
| |
| it should "reject an api commands with an invalid path parameter" in { |
| val badpath = "badpath" |
| |
| var rr = apiCreate(basepath = Some("/basepath"), relpath = Some(badpath), operation = Some("GET"), action = Some("action"), expectedExitCode = ANY_ERROR_EXIT) |
| rr.stderr should include (s"'${badpath}' must begin with '/'") |
| |
| rr = apiDelete(basepathOrApiName = "/basepath", relpath = Some(badpath), operation = Some("GET"), expectedExitCode = ANY_ERROR_EXIT) |
| rr.stderr should include (s"'${badpath}' must begin with '/'") |
| |
| rr = apiList(basepathOrApiName = Some("/basepath"), relpath = Some(badpath), operation = Some("GET"), expectedExitCode = ANY_ERROR_EXIT) |
| rr.stderr should include (s"'${badpath}' must begin with '/'") |
| } |
| |
| it should "verify full list output" in { |
| val testName = "CLI_APIGWTEST_RO1" |
| val testbasepath = "/" + testName + "_bp" |
| val testrelpath = "/path" |
| val testnewrelpath = "/path_new" |
| val testurlop = "get" |
| val testapiname = testName + " API Name" |
| val actionName = testName + "_action" |
| try { |
| println("cli user: " + cliuser + "; cli namespace: " + clinamespace) |
| |
| var rr = apiCreate(basepath = Some(testbasepath), relpath = Some(testrelpath), operation = Some(testurlop), action = Some(actionName), apiname = Some(testapiname)) |
| println("api create: " + rr.stdout) |
| rr.stdout should include("ok: created API") |
| rr = apiList(basepathOrApiName = Some(testbasepath), relpath = Some(testrelpath), operation = Some(testurlop), full = Some(true)) |
| println("api list: " + rr.stdout) |
| rr.stdout should include("ok: APIs") |
| rr.stdout should include regex (s"Action:\\s+/${clinamespace}/${actionName}\n") |
| rr.stdout should include regex (s"Verb:\\s+${testurlop}\n") |
| rr.stdout should include regex (s"Base path:\\s+${testbasepath}\n") |
| rr.stdout should include regex (s"Path:\\s+${testrelpath}\n") |
| rr.stdout should include regex (s"API Name:\\s+${testapiname}\n") |
| rr.stdout should include regex (s"URL:\\s+") |
| rr.stdout should include(testbasepath + testrelpath) |
| } |
| finally { |
| val deleteresult = apiDelete(basepathOrApiName = testbasepath) |
| } |
| } |
| |
| it should "verify successful creation and deletion of a new API" in { |
| val testName = "CLI_APIGWTEST1" |
| val testbasepath = "/"+testName+"_bp" |
| val testrelpath = "/path" |
| val testnewrelpath = "/path_new" |
| val testurlop = "get" |
| val testapiname = testName+" API Name" |
| val actionName = testName+"_action" |
| try { |
| println("cli user: "+cliuser+"; cli namespace: "+clinamespace) |
| |
| var rr = apiCreate(basepath = Some(testbasepath), relpath = Some(testrelpath), operation = Some(testurlop), action = Some(actionName), apiname = Some(testapiname)) |
| rr.stdout should include("ok: created API") |
| rr = apiList(basepathOrApiName = Some(testbasepath), relpath = Some(testrelpath), operation = Some(testurlop)) |
| rr.stdout should include("ok: APIs") |
| rr.stdout should include regex (s"/${clinamespace}/${actionName}\\s+${testurlop}\\s+${testapiname}\\s+") |
| rr.stdout should include(testbasepath + testrelpath) |
| val deleteresult = apiDelete(basepathOrApiName = testbasepath) |
| deleteresult.stdout should include("ok: deleted API") |
| } |
| finally { |
| val deleteresult = apiDelete(basepathOrApiName = testbasepath, expectedExitCode = DONTCARE_EXIT) |
| } |
| } |
| |
| it should "verify get API name " in { |
| val testName = "CLI_APIGWTEST3" |
| val testbasepath = "/"+testName+"_bp" |
| val testrelpath = "/path" |
| val testnewrelpath = "/path_new" |
| val testurlop = "get" |
| val testapiname = testName+" API Name" |
| val actionName = testName+"_action" |
| try { |
| var rr = apiCreate(basepath = Some(testbasepath), relpath = Some(testrelpath), operation = Some(testurlop), action = Some(actionName), apiname = Some(testapiname)) |
| rr.stdout should include("ok: created API") |
| rr = apiGet(basepathOrApiName = Some(testapiname)) |
| rr.stdout should include(testbasepath) |
| rr.stdout should include(s"${actionName}") |
| } |
| finally { |
| val deleteresult = apiDelete(basepathOrApiName = testbasepath, expectedExitCode = DONTCARE_EXIT) |
| } |
| } |
| |
| it should "verify delete API name " in { |
| val testName = "CLI_APIGWTEST4" |
| val testbasepath = "/"+testName+"_bp" |
| val testrelpath = "/path" |
| val testnewrelpath = "/path_new" |
| val testurlop = "get" |
| val testapiname = testName+" API Name" |
| val actionName = testName+"_action" |
| try { |
| var rr = apiCreate(basepath = Some(testbasepath), relpath = Some(testrelpath), operation = Some(testurlop), action = Some(actionName), apiname = Some(testapiname)) |
| rr.stdout should include("ok: created API") |
| rr = apiDelete(basepathOrApiName = testapiname) |
| rr.stdout should include("ok: deleted API") |
| } |
| finally { |
| val deleteresult = apiDelete(basepathOrApiName = testbasepath, expectedExitCode = DONTCARE_EXIT) |
| } |
| } |
| |
| it should "verify delete API basepath " in { |
| val testName = "CLI_APIGWTEST5" |
| val testbasepath = "/"+testName+"_bp" |
| val testrelpath = "/path" |
| val testnewrelpath = "/path_new" |
| val testurlop = "get" |
| val testapiname = testName+" API Name" |
| val actionName = testName+"_action" |
| try { |
| var rr = apiCreate(basepath = Some(testbasepath), relpath = Some(testrelpath), operation = Some(testurlop), action = Some(actionName), apiname = Some(testapiname)) |
| rr.stdout should include("ok: created API") |
| rr = apiDelete(basepathOrApiName = testbasepath) |
| rr.stdout should include("ok: deleted API") |
| } |
| finally { |
| val deleteresult = apiDelete(basepathOrApiName = testbasepath, expectedExitCode = DONTCARE_EXIT) |
| } |
| } |
| |
| it should "verify adding endpoints to existing api" in { |
| val testName = "CLI_APIGWTEST6" |
| val testbasepath = "/"+testName+"_bp" |
| val testrelpath = "/path2" |
| val testnewrelpath = "/path_new" |
| val testurlop = "get" |
| val testapiname = testName+" API Name" |
| val actionName = testName+"_action" |
| val newEndpoint = "/newEndpoint" |
| try { |
| var rr = apiCreate(basepath = Some(testbasepath), relpath = Some(testrelpath), operation = Some(testurlop), action = Some(actionName), apiname = Some(testapiname)) |
| rr.stdout should include("ok: created API") |
| rr = apiCreate(basepath = Some(testbasepath), relpath = Some(newEndpoint), operation = Some(testurlop), action = Some(actionName), apiname = Some(testapiname)) |
| rr.stdout should include("ok: created API") |
| rr = apiList(basepathOrApiName = Some(testbasepath)) |
| rr.stdout should include("ok: APIs") |
| rr.stdout should include regex (s"/${clinamespace}/${actionName}\\s+${testurlop}\\s+${testapiname}\\s+") |
| rr.stdout should include(testbasepath + testrelpath) |
| rr.stdout should include(testbasepath + newEndpoint) |
| } |
| finally { |
| val deleteresult = apiDelete(basepathOrApiName = testbasepath, expectedExitCode = DONTCARE_EXIT) |
| } |
| } |
| |
| it should "verify successful creation with swagger doc as input" in { |
| // NOTE: These values must match the swagger file contents |
| val testName = "CLI_APIGWTEST7" |
| val testbasepath = "/"+testName+"_bp" |
| val testrelpath = "/path" |
| val testurlop = "get" |
| val testapiname = testName+" API Name" |
| val actionName = testName+"_action" |
| val swaggerPath = TestUtils.getTestApiGwFilename("testswaggerdoc1") |
| try { |
| var rr = apiCreate(swagger = Some(swaggerPath)) |
| rr.stdout should include("ok: created API") |
| rr = apiList(basepathOrApiName = Some(testbasepath), relpath = Some(testrelpath), operation = Some(testurlop)) |
| println("list stdout: "+rr.stdout) |
| println("list stderr: "+rr.stderr) |
| rr.stdout should include("ok: APIs") |
| // Actual CLI namespace will vary from local dev to automated test environments, so don't check |
| rr.stdout should include regex (s"/[@\\w._\\-]+/${actionName}\\s+${testurlop}\\s+${testapiname}\\s+") |
| rr.stdout should include(testbasepath + testrelpath) |
| } |
| finally { |
| val deleteresult = apiDelete(basepathOrApiName = testbasepath, expectedExitCode = DONTCARE_EXIT) |
| } |
| } |
| |
| it should "verify adding endpoints to two existing apis" in { |
| val testName = "CLI_APIGWTEST8" |
| val testbasepath = "/"+testName+"_bp" |
| val testbasepath2 = "/"+testName+"_bp2" |
| val testrelpath = "/path2" |
| val testnewrelpath = "/path_new" |
| val testurlop = "get" |
| val testapiname = testName+" API Name" |
| val actionName = testName+"_action" |
| val newEndpoint = "/newEndpoint" |
| try { |
| var rr = apiCreate(basepath = Some(testbasepath), relpath = Some(testrelpath), operation = Some(testurlop), action = Some(actionName), apiname = Some(testapiname)) |
| rr.stdout should include("ok: created API") |
| rr = apiCreate(basepath = Some(testbasepath2), relpath = Some(testrelpath), operation = Some(testurlop), action = Some(actionName), apiname = Some(testapiname)) |
| rr.stdout should include("ok: created API") |
| |
| // Update both APIs - each with a new endpoint |
| rr = apiCreate(basepath = Some(testbasepath), relpath = Some(newEndpoint), operation = Some(testurlop), action = Some(actionName)) |
| rr.stdout should include("ok: created API") |
| rr = apiCreate(basepath = Some(testbasepath2), relpath = Some(newEndpoint), operation = Some(testurlop), action = Some(actionName)) |
| rr.stdout should include("ok: created API") |
| |
| rr = apiList(basepathOrApiName = Some(testbasepath)) |
| rr.stdout should include("ok: APIs") |
| rr.stdout should include regex (s"/${clinamespace}/${actionName}\\s+${testurlop}\\s+${testapiname}\\s+") |
| rr.stdout should include(testbasepath + testrelpath) |
| rr.stdout should include(testbasepath + newEndpoint) |
| |
| rr = apiList(basepathOrApiName = Some(testbasepath2)) |
| rr.stdout should include("ok: APIs") |
| rr.stdout should include regex (s"/${clinamespace}/${actionName}\\s+${testurlop}\\s+${testapiname}\\s+") |
| rr.stdout should include(testbasepath2 + testrelpath) |
| rr.stdout should include(testbasepath2 + newEndpoint) |
| } |
| finally { |
| var deleteresult = apiDelete(basepathOrApiName = testbasepath, expectedExitCode = DONTCARE_EXIT) |
| deleteresult = apiDelete(basepathOrApiName = testbasepath2, expectedExitCode = DONTCARE_EXIT) |
| } |
| } |
| |
| it should "verify successful creation of a new API using an action name using all allowed characters" in { |
| // Be aware: full action name is close to being truncated by the 'list' command |
| // e.g. /lime@us.ibm.com/CLI_APIGWTEST9a-c@t ion is currently at the 40 char 'list' display max |
| val testName = "CLI_APIGWTEST9" |
| val testbasepath = "/" + testName + "_bp" |
| val testrelpath = "/path" |
| val testnewrelpath = "/path_new" |
| val testurlop = "get" |
| val testapiname = testName+" API Name" |
| val actionName = testName+"a-c@t ion" |
| try { |
| println("cli user: "+cliuser+"; cli namespace: "+clinamespace) |
| |
| var rr = apiCreate(basepath = Some(testbasepath), relpath = Some(testrelpath), operation = Some(testurlop), action = Some(actionName), apiname = Some(testapiname)) |
| rr.stdout should include("ok: created API") |
| rr = apiList(basepathOrApiName = Some(testbasepath), relpath = Some(testrelpath), operation = Some(testurlop)) |
| rr.stdout should include("ok: APIs") |
| rr.stdout should include regex (s"/${clinamespace}/${actionName}\\s+${testurlop}\\s+${testapiname}\\s+") |
| rr.stdout should include(testbasepath + testrelpath) |
| val deleteresult = apiDelete(basepathOrApiName = testbasepath) |
| deleteresult.stdout should include("ok: deleted API") |
| } |
| finally { |
| val deleteresult = apiDelete(basepathOrApiName = testbasepath, expectedExitCode = DONTCARE_EXIT) |
| } |
| } |
| |
| it should "verify failed creation with invalid swagger doc as input" in { |
| val testName = "CLI_APIGWTEST10" |
| val testbasepath = "/" + testName + "_bp" |
| val testrelpath = "/path" |
| val testnewrelpath = "/path_new" |
| val testurlop = "get" |
| val testapiname = testName + " API Name" |
| val actionName = testName + "_action" |
| val swaggerPath = TestUtils.getTestApiGwFilename(s"testswaggerdocinvalid") |
| try { |
| var rr = apiCreate(swagger = Some(swaggerPath), expectedExitCode = ANY_ERROR_EXIT) |
| println("api create stdout: " + rr.stdout) |
| println("api create stderr: " + rr.stderr) |
| rr.stderr should include(s"Swagger file is invalid") |
| } finally { |
| val deleteresult = apiDelete(basepathOrApiName = testbasepath, expectedExitCode = DONTCARE_EXIT) |
| } |
| } |
| |
| it should "verify delete basepath/path " in { |
| val testName = "CLI_APIGWTEST11" |
| val testbasepath = "/" + testName + "_bp" |
| val testrelpath = "/path" |
| val testnewrelpath = "/path_new" |
| val testurlop = "get" |
| val testapiname = testName + " API Name" |
| val actionName = testName + "_action" |
| try { |
| var rr = apiCreate(basepath = Some(testbasepath), relpath = Some(testrelpath), operation = Some(testurlop), action = Some(actionName), apiname = Some(testapiname)) |
| rr.stdout should include("ok: created API") |
| var rr2 = apiCreate(basepath = Some(testbasepath), relpath = Some(testnewrelpath), operation = Some(testurlop), action = Some(actionName), apiname = Some(testapiname)) |
| rr2.stdout should include("ok: created API") |
| rr = apiDelete(basepathOrApiName = testbasepath, relpath = Some(testrelpath)) |
| rr.stdout should include("ok: deleted " + testrelpath +" from "+ testbasepath) |
| rr2 = apiList(basepathOrApiName = Some(testbasepath), relpath = Some(testnewrelpath)) |
| rr2.stdout should include("ok: APIs") |
| rr2.stdout should include regex (s"/${clinamespace}/${actionName}\\s+${testurlop}\\s+${testapiname}\\s+") |
| rr2.stdout should include(testbasepath + testnewrelpath) |
| } finally { |
| val deleteresult = apiDelete(basepathOrApiName = testbasepath, expectedExitCode = DONTCARE_EXIT) |
| } |
| } |
| |
| it should "verify delete single operation from existing API basepath/path/operation(s) " in { |
| val testName = "CLI_APIGWTEST12" |
| val testbasepath = "/" + testName + "_bp" |
| val testrelpath = "/path2" |
| val testnewrelpath = "/path_new" |
| val testurlop = "get" |
| val testurlop2 = "post" |
| val testapiname = testName + " API Name" |
| val actionName = testName + "_action" |
| try { |
| var rr = apiCreate(basepath = Some(testbasepath), relpath = Some(testrelpath), operation = Some(testurlop), action = Some(actionName), apiname = Some(testapiname)) |
| rr.stdout should include("ok: created API") |
| rr = apiCreate(basepath = Some(testbasepath), relpath = Some(testrelpath), operation = Some(testurlop2), action = Some(actionName), apiname = Some(testapiname)) |
| rr.stdout should include("ok: created API") |
| rr = apiList(basepathOrApiName = Some(testbasepath)) |
| rr.stdout should include("ok: APIs") |
| rr.stdout should include regex (s"/${clinamespace}/${actionName}\\s+${testurlop}\\s+${testapiname}\\s+") |
| rr.stdout should include(testbasepath + testrelpath) |
| rr = apiDelete(basepathOrApiName = testbasepath,relpath = Some(testrelpath), operation = Some(testurlop2)) |
| rr.stdout should include("ok: deleted " + testrelpath + " " + "POST" +" from "+ testbasepath) |
| rr = apiList(basepathOrApiName = Some(testbasepath)) |
| rr.stdout should include regex (s"/${clinamespace}/${actionName}\\s+${testurlop}\\s+${testapiname}\\s+") |
| } finally { |
| val deleteresult = apiDelete(basepathOrApiName = testbasepath, expectedExitCode = DONTCARE_EXIT) |
| } |
| } |
| |
| it should "verify successful creation with complex swagger doc as input" in { |
| val testName = "CLI_APIGWTEST13" |
| val testbasepath = "/test1/v1" |
| val testrelpath = "/whisk.system/utils/echo" |
| val testrelpath2 = "/whisk.system/utils/split" |
| val testurlop = "get" |
| val testapiname = "/test1/v1" |
| val actionName = "test1a" |
| val swaggerPath = TestUtils.getTestApiGwFilename(s"testswaggerdoc2") |
| try { |
| var rr = apiCreate(swagger = Some(swaggerPath)) |
| println("api create stdout: " + rr.stdout) |
| println("api create stderror: " + rr.stderr) |
| rr.stdout should include("ok: created API") |
| rr = apiList(basepathOrApiName = Some(testbasepath), relpath = Some(testrelpath), operation = Some(testurlop)) |
| rr.stdout should include("ok: APIs") |
| // Actual CLI namespace will vary from local dev to automated test environments, so don't check |
| rr.stdout should include regex (s"/[@\\w._\\-]+/${actionName}\\s+${testurlop}\\s+${testapiname}\\s+") |
| rr.stdout should include(testbasepath + testrelpath) |
| rr.stdout should include(testbasepath + testrelpath2) |
| } finally { |
| val deleteresult = apiDelete(basepathOrApiName = testbasepath, expectedExitCode = DONTCARE_EXIT) |
| } |
| } |
| |
| it should "verify successful creation and deletion with multiple base paths" in { |
| val testName = "CLI_APIGWTEST14" |
| val testbasepath = "/" + testName + "_bp" |
| val testbasepath2 = "/" + testName + "_bp2" |
| val testrelpath = "/path" |
| val testnewrelpath = "/path_new" |
| val testurlop = "get" |
| val testapiname = testName + " API Name" |
| val actionName = testName + "_action" |
| try { |
| var rr = apiCreate(basepath = Some(testbasepath), relpath = Some(testrelpath), operation = Some(testurlop), action = Some(actionName), apiname = Some(testapiname)) |
| rr.stdout should include("ok: created API") |
| rr = apiList(basepathOrApiName = Some(testbasepath), relpath = Some(testrelpath), operation = Some(testurlop)) |
| rr.stdout should include("ok: APIs") |
| rr.stdout should include regex (s"/${clinamespace}/${actionName}\\s+${testurlop}\\s+${testapiname}\\s+") |
| rr.stdout should include(testbasepath + testrelpath) |
| rr = apiCreate(basepath = Some(testbasepath2), relpath = Some(testrelpath), operation = Some(testurlop), action = Some(actionName), apiname = Some(testapiname)) |
| rr.stdout should include("ok: created API") |
| rr = apiList(basepathOrApiName = Some(testbasepath2), relpath = Some(testrelpath), operation = Some(testurlop)) |
| rr.stdout should include("ok: APIs") |
| rr.stdout should include regex (s"/${clinamespace}/${actionName}\\s+${testurlop}\\s+${testapiname}\\s+") |
| rr.stdout should include(testbasepath2 + testrelpath) |
| rr = apiDelete(basepathOrApiName = testbasepath2) |
| rr.stdout should include("ok: deleted API") |
| rr = apiList(basepathOrApiName = Some(testbasepath), relpath = Some(testrelpath), operation = Some(testurlop)) |
| rr.stdout should include("ok: APIs") |
| rr.stdout should include regex (s"/${clinamespace}/${actionName}\\s+${testurlop}\\s+${testapiname}\\s+") |
| rr.stdout should include(testbasepath + testrelpath) |
| rr = apiDelete(basepathOrApiName = testbasepath) |
| rr.stdout should include("ok: deleted API") |
| } finally { |
| var deleteresult = apiDelete(basepathOrApiName = testbasepath, expectedExitCode = DONTCARE_EXIT) |
| deleteresult = apiDelete(basepathOrApiName = testbasepath2, expectedExitCode = DONTCARE_EXIT) |
| } |
| } |
| } |
