| *PPD-Adobe: "4.0" | |
| *% Adobe Systems PostScript(R) Printer Description File | |
| *% Copyright 1987-1994 Adobe Systems Incorporated. | |
| *% All Rights Reserved. | |
| *% Permission is granted for redistribution of this file as | |
| *% long as this copyright notice is intact and the contents | |
| *% of the file is not altered in any way from its original form. | |
| *% End of Copyright statement | |
| *FormatVersion: "4.0" | |
| *FileVersion: "1.3" | |
| *PCFileName: "APNTX501.PPD" | |
| *LanguageVersion: English | |
| *Product: "(LaserWriter II NTX)" | |
| *PSVersion: "(50.5) 2" | |
| *ModelName: "Apple LaserWriter II NTX v50.5" | |
| *NickName: "Apple LaserWriter II NTX v50.5" | |
| *% General Information and Defaults =============== | |
| *FreeVM: "4076994" | |
| *Extensions: FileSystem Composite | |
| *LanguageLevel: "1" | |
| *ColorDevice: False | |
| *DefaultColorSpace: Gray | |
| *VariablePaperSize: False | |
| *FileSystem: True | |
| *?FileSystem: " | |
| save | |
| statusdict /diskonline get exec {(True)}{(False)} ifelse = flush | |
| restore | |
| " | |
| *End | |
| *Throughput: "8" | |
| *Password: "0" | |
| *ExitServer: " | |
| count 0 eq { % is the password on the stack? | |
| true | |
| }{ | |
| dup % potential password | |
| statusdict /checkpassword get exec not | |
| } ifelse | |
| { % if no password or not valid | |
| (WARNING : Cannot perform the exitserver command.) = | |
| (Password supplied is not valid.) = | |
| (Please contact the author of this software.) = flush | |
| quit | |
| } if | |
| serverdict /exitserver get exec | |
| " | |
| *End | |
| *Reset: " | |
| count 0 eq { % is the password on the stack? | |
| true | |
| }{ | |
| dup % potential password | |
| statusdict /checkpassword get exec not | |
| } ifelse | |
| { % if no password or not valid | |
| (WARNING : Cannot reset printer.) = | |
| (Password supplied is not valid.) = | |
| (Please contact the author of this software.) = flush | |
| quit | |
| } if | |
| serverdict /exitserver get exec | |
| systemdict /quit get exec | |
| (WARNING : Printer Reset Failed.) = flush | |
| " | |
| *End | |
| *DefaultResolution: 300dpi | |
| *?Resolution: " | |
| save | |
| initgraphics | |
| 0 0 moveto currentpoint matrix defaultmatrix transform | |
| 0 72 lineto currentpoint matrix defaultmatrix transform | |
| 3 -1 roll sub dup mul | |
| 3 1 roll exch sub dup mul | |
| add sqrt round cvi | |
| ( ) cvs print (dpi) = flush | |
| restore | |
| " | |
| *End | |
| *% Halftone Information =============== | |
| *ScreenFreq: "60.0" | |
| *ScreenAngle: "45.0" | |
| *DefaultScreenProc: Dot | |
| *ScreenProc Dot: " | |
| {abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1 | |
| sub }{dup mul exch dup mul add 1 exch sub }ifelse } | |
| " | |
| *End | |
| *ScreenProc Line: "{ pop }" | |
| *ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }" | |
| *DefaultTransfer: Null | |
| *Transfer Null: "{ }" | |
| *Transfer Null.Inverse: "{ 1 exch sub }" | |
| *% Paper Handling =================== | |
| *% Use these entries to set paper size most of the time, unless there is | |
| *% specific reason to use PageRegion. | |
| *OpenUI *PageSize: PickOne | |
| *OrderDependency: 30 AnySetup *PageSize | |
| *DefaultPageSize: Letter | |
| *PageSize Letter/US Letter: "statusdict /lettertray get exec" | |
| *PageSize Legal/US Legal: "statusdict /legaltray get exec" | |
| *PageSize A4: "statusdict /a4tray get exec" | |
| *PageSize B5: "statusdict /b5tray get exec" | |
| *PageSize LetterSmall/US Letter Small: "statusdict /lettertray get exec lettersmall" | |
| *PageSize A4Small/A4 Small: "statusdict /a4tray get exec a4small" | |
| *PageSize LegalSmall/US Legal Small: "legal" | |
| *PageSize Monarch/Monarch Envelope Center Fed: "statusdict /lettertray get exec" | |
| *PageSize Com10/Com10 Envelope Center Fed: "statusdict /lettertray get exec" | |
| *?PageSize: " | |
| save | |
| [(Letter)(Legal)] statusdict /pagetype get exec | |
| {get} stopped { pop pop (Unknown)} if = flush | |
| restore | |
| " | |
| *End | |
| *CloseUI: *PageSize | |
| *% These entries will set up the frame buffer. Usually used with manual feed. | |
| *OpenUI *PageRegion: PickOne | |
| *OrderDependency: 40 AnySetup *PageRegion | |
| *DefaultPageRegion: Letter | |
| *PageRegion Letter/US Letter: "letter" | |
| *PageRegion Legal/US Legal: "legal" | |
| *PageRegion A4: "a4" | |
| *PageRegion B5: "b5" | |
| *PageRegion LetterSmall/US Letter Small: "lettersmall" | |
| *PageRegion A4Small/A4 Small: "a4small" | |
| *PageRegion LegalSmall/US Legal Small: "legal" | |
| *PageRegion Monarch/Monarch Envelope Center Fed: "letter" | |
| *PageRegion Com10/Com10 Envelope Center Fed: "letter" | |
| *CloseUI: *PageRegion | |
| *% The following entries provide information about specific paper keywords. | |
| *DefaultImageableArea: Letter | |
| *ImageableArea Letter/US Letter: "15 8 597 784 " | |
| *ImageableArea Legal/US Legal: "15 8 597 1000 " | |
| *ImageableArea A4: "13 10 577 832 " | |
| *ImageableArea B5: "21 10 500 715 " | |
| *ImageableArea LetterSmall/US Letter Small: "31 31 583 761 " | |
| *ImageableArea A4Small/A4 Small: "29 31 567 812 " | |
| *ImageableArea LegalSmall/US Legal Small: "64 54 548 954 " | |
| *ImageableArea Monarch/Monarch Envelope Center Fed: "178.5 269 433.5 773 " | |
| *ImageableArea Com10/Com10 Envelope Center Fed: "169.5 125 442.5 773 " | |
| *?ImageableArea: " | |
| save | |
| /cvp {( ) cvs print ( ) print } bind def | |
| /upperright {10000 mul floor 10000 div} bind def | |
| /lowerleft {10000 mul ceiling 10000 div} bind def | |
| newpath clippath pathbbox | |
| 4 -2 roll exch 2 {lowerleft cvp} repeat | |
| exch 2 {upperright cvp} repeat flush | |
| restore | |
| " | |
| *End | |
| *% These provide the physical dimensions of the paper (by keyword) | |
| *DefaultPaperDimension: Letter | |
| *PaperDimension Letter/US Letter: "612 792" | |
| *PaperDimension Legal/US Legal: "612 1008" | |
| *PaperDimension A4: "595 842" | |
| *PaperDimension B5: "516 729" | |
| *PaperDimension LetterSmall/US Letter Small: "612 792" | |
| *PaperDimension A4Small/A4 Small: "595 842" | |
| *PaperDimension LegalSmall/US Legal Small: "612 1008" | |
| *PaperDimension Monarch/Monarch Envelope Center Fed: "611 792" | |
| *PaperDimension Com10/Com10 Envelope Center Fed: "610 792" | |
| *OpenUI *ManualFeed/Manual Feed: Boolean | |
| *OrderDependency: 20 AnySetup *ManualFeed | |
| *DefaultManualFeed: False | |
| *ManualFeed True: "statusdict /manualfeed true put" | |
| *ManualFeed False: "statusdict /manualfeed false put" | |
| *?ManualFeed: " | |
| save | |
| statusdict /manualfeed get {(True)}{(False)}ifelse = flush | |
| restore | |
| " | |
| *End | |
| *CloseUI: *ManualFeed | |
| *DefaultOutputOrder: Normal | |
| *RequiresPageRegion All: True | |
| *OpenUI *InputSlot: PickOne | |
| *OrderDependency: 20 AnySetup *InputSlot | |
| *DefaultInputSlot: Cassette | |
| *InputSlot Cassette: "" | |
| *CloseUI: *InputSlot | |
| *% Font Information ===================== | |
| *DefaultFont: Courier | |
| *Font AGaramond-Bold: Standard "(001.000)" Standard ROM | |
| *Font AGaramond-BoldItalic: Standard "(001.000)" Standard ROM | |
| *Font AGaramond-Italic: Standard "(001.000)" Standard ROM | |
| *Font AGaramond-Regular: Standard "(001.000)" Standard ROM | |
| *Font AGaramond-Semibold: Standard "(001.000)" Standard ROM | |
| *Font AGaramond-SemiboldItalic: Standard "(001.000)" Standard ROM | |
| *Font AGaramond-Titling: Standard "(001.000)" Standard ROM | |
| *Font AvantGarde-Book: Standard "(001.002)" Standard ROM | |
| *Font AvantGarde-BookOblique: Standard "(001.002)" Standard ROM | |
| *Font AvantGarde-Demi: Standard "(001.003)" Standard ROM | |
| *Font AvantGarde-DemiOblique: Standard "(001.003)" Standard ROM | |
| *Font Bookman-Demi: Standard "(001.001)" Standard ROM | |
| *Font Bookman-DemiItalic: Standard "(001.001)" Standard ROM | |
| *Font Bookman-Light: Standard "(001.001)" Standard ROM | |
| *Font Bookman-LightItalic: Standard "(001.001)" Standard ROM | |
| *Font Courier: Standard "(001.004)" Standard ROM | |
| *Font Courier-Bold: Standard "(001.004)" Standard ROM | |
| *Font Courier-BoldOblique: Standard "(001.004)" Standard ROM | |
| *Font Courier-Oblique: Standard "(001.004)" Standard ROM | |
| *Font Helvetica: Standard "(001.002)" Standard ROM | |
| *Font Helvetica-Bold: Standard "(001.002)" Standard ROM | |
| *Font Helvetica-BoldOblique: Standard "(001.002)" Standard ROM | |
| *Font Helvetica-Narrow: Standard "(001.002)" Standard ROM | |
| *Font Helvetica-Narrow-Bold: Standard "(001.002)" Standard ROM | |
| *Font Helvetica-Narrow-BoldOblique: Standard "(001.002)" Standard ROM | |
| *Font Helvetica-Narrow-Oblique: Standard "(001.002)" Standard ROM | |
| *Font Helvetica-Oblique: Standard "(001.002)" Standard ROM | |
| *Font NewCenturySchlbk-Bold: Standard "(001.006)" Standard ROM | |
| *Font NewCenturySchlbk-BoldItalic: Standard "(001.004)" Standard ROM | |
| *Font NewCenturySchlbk-Italic: Standard "(001.003)" Standard ROM | |
| *Font NewCenturySchlbk-Roman: Standard "(001.004)" Standard ROM | |
| *Font Palatino-Bold: Standard "(001.002)" Standard ROM | |
| *Font Palatino-BoldItalic: Standard "(001.002)" Standard ROM | |
| *Font Palatino-Italic: Standard "(001.002)" Standard ROM | |
| *Font Palatino-Roman: Standard "(001.001)" Standard ROM | |
| *Font Symbol: Special "(001.003)" Special ROM | |
| *Font Times-Bold: Standard "(001.002)" Standard ROM | |
| *Font Times-BoldItalic: Standard "(001.004)" Standard ROM | |
| *Font Times-Italic: Standard "(001.002)" Standard ROM | |
| *Font Times-Roman: Standard "(001.002)" Standard ROM | |
| *Font ZapfChancery-MediumItalic: Standard "(001.003)" Standard ROM | |
| *Font ZapfDingbats: Special "(001.002)" Special ROM | |
| *?FontQuery: " | |
| save | |
| /str 100 string dup 0 (fonts/) putinterval def | |
| { | |
| count 1 gt | |
| { | |
| exch dup str 6 94 getinterval cvs | |
| (/) print dup print (:) print exch | |
| FontDirectory exch known | |
| { pop (Yes) } | |
| { | |
| length 6 add str 0 3 -1 roll getinterval | |
| mark exch status | |
| {cleartomark (Yes)}{cleartomark (No)} ifelse | |
| } ifelse = | |
| } | |
| {exit} ifelse | |
| }bind loop | |
| (*) = flush | |
| restore | |
| " | |
| *End | |
| *?FontList: " | |
| save | |
| FontDirectory { pop == } bind forall flush | |
| /filenameforall where | |
| { | |
| pop (fonts/*) | |
| { dup length 6 sub 6 exch getinterval cvn == } bind | |
| 128 string filenameforall flush | |
| } if | |
| (*) = flush | |
| restore | |
| " | |
| *End | |
| *% Printer Messages (verbatim from printer): | |
| *Message: "%%[ exitserver: permanent state may be changed ]%%" | |
| *Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%" | |
| *Message: "\FontName\ not found, using Courier." | |
| *% Status (format: %%[ status: <one of these> ]%% ) | |
| *Status: "idle" | |
| *Status: "busy" | |
| *Status: "waiting" | |
| *Status: "printing" | |
| *Status: "warming up" | |
| *Status: "PrinterError: timeout, clearing printer" | |
| *Status: "PrinterError: paper entry misfeed" | |
| *Status: "PrinterError: service call" | |
| *Status: "PrinterError: warming up" | |
| *Status: "PrinterError: no toner cartridge" | |
| *% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% ) | |
| *Source: "serial9" | |
| *Source: "serial25" | |
| *Source: "AppleTalk" | |
| *% Printer Error (format: %%[ PrinterError: <one of these> ]%%) | |
| *PrinterError: "timeout, clearing printer" | |
| *PrinterError: "paper entry misfeed" | |
| *PrinterError: "service call" | |
| *PrinterError: "warming up" | |
| *PrinterError: "no toner cartridge" | |
| *%DeviceAdjustMatrix: "[1 0 0 1 0 0]" | |
| *% Color Separation Information ===================== | |
| *DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi | |
| *InkName: ProcessBlack/Process Black | |
| *InkName: CustomColor/Custom Color | |
| *InkName: ProcessCyan/Process Cyan | |
| *InkName: ProcessMagenta/Process Magenta | |
| *InkName: ProcessYellow/Process Yellow | |
| *% For 60 lpi / 300 dpi =============================== | |
| *ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45" | |
| *ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45" | |
| *ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15" | |
| *ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75" | |
| *ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0" | |
| *ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60" | |
| *ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60" | |
| *ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60" | |
| *ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60" | |
| *ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60" | |
| *% For 53 lpi / 300 dpi =============================== | |
| *ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0" | |
| *ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0" | |
| *ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651" | |
| *ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349" | |
| *ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0" | |
| *ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033" | |
| *ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033" | |
| *ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342" | |
| *ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342" | |
| *ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0" | |
| *% Produced by "bldppd41.ps" version 4.0 edit 9 | |
| *% Last Edit Date: Mar 23 1994 | |
| *% The byte count of this file should be exactly 012379 or 012730 | |
| *% depending on the filesystem it resides in. | |
| *% end of PPD file for LaserWriter II NTX |