| /************************************************************** | |
| * | |
| * Licensed to the Apache Software Foundation (ASF) under one | |
| * or more contributor license agreements. See the NOTICE file | |
| * distributed with this work for additional information | |
| * regarding copyright ownership. The ASF licenses this file | |
| * to you under the Apache License, Version 2.0 (the | |
| * "License"); you may not use this file except in compliance | |
| * with the License. You may obtain a copy of the License at | |
| * | |
| * http://www.apache.org/licenses/LICENSE-2.0 | |
| * | |
| * Unless required by applicable law or agreed to in writing, | |
| * software distributed under the License is distributed on an | |
| * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY | |
| * KIND, either express or implied. See the License for the | |
| * specific language governing permissions and limitations | |
| * under the License. | |
| * | |
| *************************************************************/ | |
| #ifndef __com_sun_star_drawing_EnhancedCustomShapeExtrusion_idl__ | |
| #define __com_sun_star_drawing_EnhancedCustomShapeExtrusion_idl__ | |
| #ifndef __com_sun_star_awt_Size_idl__ | |
| #include <com/sun/star/awt/Size.idl> | |
| #endif | |
| #ifndef __com_sun_star_awt_Point_idl__ | |
| #include <com/sun/star/awt/Point.idl> | |
| #endif | |
| #ifndef __com_sun_star_beans_PropertyValue_idl__ | |
| #include <com/sun/star/beans/PropertyValue.idl> | |
| #endif | |
| #ifndef __com_sun_star_drawing_Position3D_idl__ | |
| #include <com/sun/star/drawing/Position3D.idl> | |
| #endif | |
| #ifndef __com_sun_star_drawing_Direction3D_idl__ | |
| #include <com/sun/star/drawing/Direction3D.idl> | |
| #endif | |
| #ifndef __com_sun_star_drawing_ProjectionMode_idl__ | |
| #include <com/sun/star/drawing/ProjectionMode.idl> | |
| #endif | |
| #ifndef __com_sun_star_drawing_ShadeMode_idl__ | |
| #include <com/sun/star/drawing/ShadeMode.idl> | |
| #endif | |
| #ifndef __com_sun_star_drawing_EnhancedCustomShapeParameterPair_idl__ | |
| #include <com/sun/star/drawing/EnhancedCustomShapeParameterPair.idl> | |
| #endif | |
| //============================================================================= | |
| module com { module sun { module star { module drawing { | |
| //============================================================================= | |
| /** | |
| This service may be represented by a ::com::sun::star::beans::PropertyValue []. | |
| */ | |
| service EnhancedCustomShapeExtrusion | |
| { | |
| /** This property specifies if extrusion is displayed. The default for this property | |
| is "false" | |
| */ | |
| [optional, property] boolean Extrusion; | |
| /** This attribute specifies the brightness of a scene in percent. | |
| */ | |
| [optional, property] double Brightness; | |
| /** The first value of EnhancedCustomShapeParameterPair specifies the depth of the | |
| extrusion in 1/100 mm. The second value (0.0 to 1.0) specifies the fraction of | |
| the extrusion that lies before the shape, a value of 0 is default. | |
| */ | |
| [optional, property] ::com::sun::star::drawing::EnhancedCustomShapeParameterPair Depth; | |
| /** This attribute specifies the amount of diffusion reflected by the shape | |
| in percent | |
| */ | |
| [optional, property] double Diffusion; | |
| /** Specifies the number of line segments that should be used to display curved surfaces. | |
| The higher the number the more line segments are used. | |
| */ | |
| [optional, property] long NumberOfLineSegments; | |
| /** Specifies if the front face of the extrusion responds to lightning changes. | |
| */ | |
| [optional, property] boolean LightFace; | |
| /** Specifies if the primary light is harsh. | |
| */ | |
| [optional, property] boolean FirstLightHarsh; | |
| /** Specifies if the secondary light is harsh. | |
| */ | |
| [optional, property] boolean SecondLightHarsh; | |
| /** Specifies the intensity for the first light in percent. | |
| */ | |
| [optional, property] double FirstLightLevel; | |
| /** Specifies the intensity for the second light in percent. | |
| */ | |
| [optional, property] double SecondLightLevel; | |
| /** Specifies the direction of the first light. | |
| */ | |
| [optional, property] ::com::sun::star::drawing::Direction3D FirstLightDirection; | |
| /** Specifies the direction of the second light. | |
| */ | |
| [optional, property] ::com::sun::star::drawing::Direction3D SecondLightDirection; | |
| /** Specifies if the surface of the extrusion object looks like metal. | |
| */ | |
| [optional, property] boolean Metal; | |
| /** This property defines the shade mode. | |
| */ | |
| [optional, property] ::com::sun::star::drawing::ShadeMode ShadeMode; | |
| /** This attributes specifies the rotation angle about the x-axis in grad. | |
| The order of rotation is: z-axis, y-axis and then x-axis. The z-axis is | |
| specified by the draw:rotate-angle. | |
| */ | |
| [optional, property] ::com::sun::star::drawing::EnhancedCustomShapeParameterPair RotateAngle; | |
| /** This attribute specifies the position of the rotate center | |
| in terms of shape size fractions, if the property is omitted, then | |
| the geometrical center of the shape is used (this is the default). | |
| */ | |
| [optional, property] ::com::sun::star::drawing::Direction3D RotationCenter; | |
| /** The draw:extrusion-shininess specifies the shininess of a mirror in percent. | |
| */ | |
| [optional, property] double Shininess; | |
| /** The first value of the draw:extrusion-skew attribute specifies the skew amount of | |
| an extrusion in percent. The second parameter specifies the skew-angle. Skew settings | |
| are only applied if the attribute ProjectionMode is ProjectionMode_PARALLEL. | |
| */ | |
| [optional, property] ::com::sun::star::drawing::EnhancedCustomShapeParameterPair Skew; | |
| /** This attribute specifies the specularity of an extrusion object in percent. | |
| */ | |
| [optional, property] double Specularity; | |
| /** This property defines the projection mode. | |
| */ | |
| [optional, property] com::sun::star::drawing::ProjectionMode ProjectionMode; | |
| /** This attribute specifies the viewpoint of the observer. | |
| */ | |
| [optional, property] ::com::sun::star::drawing::Position3D ViewPoint; | |
| /** This attribute specifies the origin within the bounding box of the | |
| shape in terms of the shape size fractions. | |
| */ | |
| [optional, property] ::com::sun::star::drawing::EnhancedCustomShapeParameterPair Origin; | |
| /** This attribute specifies if the "SecondFillColor" is used as extrusion color | |
| */ | |
| [optional, property] boolean ExtrusionColor; | |
| }; | |
| //============================================================================= | |
| }; }; }; }; | |
| #endif |