| /************************************************************** | |
| * | |
| * Licensed to the Apache Software Foundation (ASF) under one | |
| * or more contributor license agreements. See the NOTICE file | |
| * distributed with this work for additional information | |
| * regarding copyright ownership. The ASF licenses this file | |
| * to you under the Apache License, Version 2.0 (the | |
| * "License"); you may not use this file except in compliance | |
| * with the License. You may obtain a copy of the License at | |
| * | |
| * http://www.apache.org/licenses/LICENSE-2.0 | |
| * | |
| * Unless required by applicable law or agreed to in writing, | |
| * software distributed under the License is distributed on an | |
| * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY | |
| * KIND, either express or implied. See the License for the | |
| * specific language governing permissions and limitations | |
| * under the License. | |
| * | |
| *************************************************************/ | |
| import com.sun.star.awt.PushButtonType; | |
| import com.sun.star.awt.XControl; | |
| import com.sun.star.awt.XDialog; | |
| import com.sun.star.awt.XFixedText; | |
| import com.sun.star.awt.XListBox; | |
| import com.sun.star.awt.XWindow; | |
| import com.sun.star.beans.MethodConcept; | |
| import com.sun.star.beans.Property; | |
| import com.sun.star.beans.PropertyValue; | |
| import com.sun.star.beans.XIntrospection; | |
| import com.sun.star.beans.XIntrospectionAccess; | |
| import com.sun.star.beans.XMultiPropertySet; | |
| import com.sun.star.beans.XPropertySet; | |
| import com.sun.star.frame.XComponentLoader; | |
| import com.sun.star.lang.XMultiComponentFactory; | |
| import com.sun.star.lang.XServiceInfo; | |
| import com.sun.star.lang.XTypeProvider; | |
| import com.sun.star.reflection.XIdlMethod; | |
| import com.sun.star.uno.Type; | |
| import com.sun.star.uno.UnoRuntime; | |
| import com.sun.star.uno.XComponentContext; | |
| public class UnoDialogSample2 extends UnoDialogSample { | |
| XIntrospectionAccess m_xIntrospectionAccess = null; | |
| Object m_oUnoObject = null; | |
| // define some constants used to set positions and sizes | |
| // of controls. For further information see | |
| // http://ui.openoffice.org/knowledge/DialogSpecificationandGuidelines.odt | |
| final static int nFixedTextHeight = 8; | |
| final static int nControlMargin = 6; | |
| final static int nDialogWidth = 250; | |
| final static int nDialogHeight = 140; | |
| // the default roadmap width == 80 MAPs | |
| final static int nRoadmapWidth = 80; | |
| final static int nButtonHeight = 14; | |
| final static int nButtonWidth = 50; | |
| public UnoDialogSample2(XComponentContext _xContext, XMultiComponentFactory _xMCF, Object _oUnoObject) { | |
| super(_xContext, _xMCF); | |
| try { | |
| m_oUnoObject = _oUnoObject; | |
| Object o = m_xMCF.createInstanceWithContext("com.sun.star.beans.Introspection", m_xContext); | |
| XIntrospection m_xIntrospection = UnoRuntime.queryInterface(XIntrospection.class, o ); | |
| // the variable m_xIntrospectionAccess offers functionality to access all methods and properties | |
| // of a variable | |
| m_xIntrospectionAccess = m_xIntrospection.inspect(_oUnoObject); | |
| } catch (com.sun.star.uno.Exception ex) { | |
| ex.printStackTrace(); | |
| } | |
| } | |
| public static void main(String args[]) { | |
| UnoDialogSample2 oUnoDialogSample2 = null; | |
| try { | |
| XComponentContext xContext = com.sun.star.comp.helper.Bootstrap.bootstrap(); | |
| if(xContext != null ) | |
| System.out.println("Connected to a running office ..."); | |
| XMultiComponentFactory xMCF = xContext.getServiceManager(); | |
| PropertyValue[] aPropertyValues = new PropertyValue[]{}; | |
| // create an arbitrary Uno-Object - in this case an empty writer document.. | |
| Object oDesktop =xMCF.createInstanceWithContext("com.sun.star.frame.Desktop", xContext); | |
| XComponentLoader xComponentLoader = UnoRuntime.queryInterface(XComponentLoader.class, oDesktop); | |
| Object oUnoObject = xComponentLoader.loadComponentFromURL("private:factory/swriter", "_default", 0, aPropertyValues); | |
| // define some coordinates where to position the controls | |
| final int nButtonPosX = (int)((nDialogWidth/2) - (nButtonWidth/2)); | |
| final int nButtonPosY = nDialogHeight - nButtonHeight - nControlMargin; | |
| final int nControlPosX = nRoadmapWidth + 2*nControlMargin; | |
| final int nControlWidth = nDialogWidth - 3*nControlMargin - nRoadmapWidth; | |
| final int nListBoxHeight = nDialogHeight - 4*nControlMargin - nButtonHeight; | |
| oUnoDialogSample2 = new UnoDialogSample2(xContext, xMCF, oUnoObject); | |
| oUnoDialogSample2.initialize( new String[] {"Height", "Moveable", "Name","PositionX","PositionY", "Step", "TabIndex","Title","Width"}, | |
| new Object[] { new Integer(nDialogHeight), Boolean.TRUE, "Dialog1", new Integer(102),new Integer(41), new Integer(1), new Short((short) 0), "Inspect a Uno-Object", new Integer(nDialogWidth)}); | |
| String sIntroLabel = "This Dialog lists information about a given Uno-Object.\nIt offers a view to inspect all suppported servicenames, exported interfaces, methods and properties."; | |
| oUnoDialogSample2.insertMultiLineFixedText(nControlPosX, 27, nControlWidth, 4, 1, sIntroLabel); | |
| // get the data from the UNO object... | |
| String[] sSupportedServiceNames = oUnoDialogSample2.getSupportedServiceNames(); | |
| String[] sInterfaceNames = oUnoDialogSample2.getExportedInterfaceNames(); | |
| String[] sMethodNames = oUnoDialogSample2.getMethodNames(); | |
| String[] sPropertyNames = oUnoDialogSample2.getPropertyNames(); | |
| // add controls to the dialog... | |
| oUnoDialogSample2.insertListBox(nControlPosX, nControlMargin, nListBoxHeight, nControlWidth, 2, sSupportedServiceNames); | |
| oUnoDialogSample2.insertListBox(nControlPosX, nControlMargin, nListBoxHeight, nControlWidth, 3, sInterfaceNames); | |
| oUnoDialogSample2.insertListBox(nControlPosX, nControlMargin, nListBoxHeight, nControlWidth, 4, sMethodNames); | |
| oUnoDialogSample2.insertListBox(nControlPosX, nControlMargin, nListBoxHeight, nControlWidth, 5, sPropertyNames); | |
| oUnoDialogSample2.insertButton(oUnoDialogSample2, nButtonPosX, nButtonPosY, nButtonWidth, "~Close", (short) PushButtonType.OK_value); | |
| oUnoDialogSample2.insertHorizontalFixedLine(0, nButtonPosY - nControlMargin - 4, nDialogWidth, ""); | |
| // create the windowpeer; | |
| // it must be kept in mind that it must be created after the insertion of the controls | |
| // (see http://qa.openoffice.org/issues/show_bug.cgi?id=75129) | |
| oUnoDialogSample2.createWindowPeer(); | |
| // add the roadmap control. Note that the roadmap may not be created before the windowpeer of the dialog exists | |
| // (see http://qa.openoffice.org/issues/show_bug.cgi?id=67369) | |
| oUnoDialogSample2.addRoadmap(oUnoDialogSample2.getRoadmapItemStateChangeListener()); | |
| oUnoDialogSample2.insertRoadmapItem(0, true, "Introduction", 1); | |
| oUnoDialogSample2.insertRoadmapItem(1, true, "Supported Services", 2); | |
| oUnoDialogSample2.insertRoadmapItem(2, true, "Interfaces", 3); | |
| oUnoDialogSample2.insertRoadmapItem(3, true, "Methods", 4); | |
| oUnoDialogSample2.insertRoadmapItem(4, true, "Properties", 5); | |
| oUnoDialogSample2.m_xRMPSet.setPropertyValue("CurrentItemID", new Short((short) 1)); | |
| oUnoDialogSample2.m_xRMPSet.setPropertyValue("Complete", Boolean.TRUE); | |
| oUnoDialogSample2.xDialog = UnoRuntime.queryInterface(XDialog.class, oUnoDialogSample2.m_xDialogControl); | |
| oUnoDialogSample2.xDialog.execute(); | |
| }catch( Exception ex ) { | |
| ex.printStackTrace(System.out); | |
| } | |
| finally{ | |
| //make sure always to dispose the component and free the memory! | |
| if (oUnoDialogSample2 != null){ | |
| if (oUnoDialogSample2.m_xComponent != null){ | |
| oUnoDialogSample2.m_xComponent.dispose(); | |
| } | |
| } | |
| } | |
| System.exit( 0 ); | |
| } | |
| public String[] getMethodNames() { | |
| String[] sMethodNames = new String[]{}; | |
| try { | |
| XIdlMethod[] xIdlMethods = m_xIntrospectionAccess.getMethods(MethodConcept.ALL); | |
| sMethodNames = new String[xIdlMethods.length]; | |
| for (int i = 0; i < xIdlMethods.length; i++){ | |
| sMethodNames[i] = xIdlMethods[i].getName(); | |
| } | |
| } | |
| catch( Exception e ) { | |
| System.err.println( e ); | |
| } | |
| return sMethodNames; | |
| } | |
| // returns the names of all supported servicenames of a UNO object | |
| public String[] getSupportedServiceNames() { | |
| String[] sSupportedServiceNames = new String[]{}; | |
| // If the Uno-Object supports "com.sun.star.lang.XServiceInfo" | |
| // this will give access to all supported servicenames | |
| XServiceInfo xServiceInfo = UnoRuntime.queryInterface( XServiceInfo.class, m_oUnoObject); | |
| if ( xServiceInfo != null ) { | |
| sSupportedServiceNames = xServiceInfo.getSupportedServiceNames(); | |
| } | |
| return sSupportedServiceNames; | |
| } | |
| // returns the names of all properties of a UNO object | |
| protected String[] getPropertyNames() { | |
| String[] sPropertyNames = new String[]{}; | |
| try { | |
| Property[] aProperties = m_xIntrospectionAccess.getProperties(com.sun.star.beans.PropertyConcept.ATTRIBUTES + com.sun.star.beans.PropertyConcept.PROPERTYSET); | |
| sPropertyNames = new String[aProperties.length]; | |
| for (int i = 0; i < aProperties.length; i++){ | |
| sPropertyNames[i] = aProperties[i].Name; | |
| } | |
| } | |
| catch( Exception e ) { | |
| System.err.println( e ); | |
| } | |
| return sPropertyNames; | |
| } | |
| // returns the names of all exported interfaces of a UNO object | |
| protected String[] getExportedInterfaceNames(){ | |
| Type[] aTypes = new Type[]{}; | |
| String[] sTypeNames = new String[]{}; | |
| // The XTypeProvider interfaces offers access to all exported interfaces | |
| XTypeProvider xTypeProvider = UnoRuntime.queryInterface( XTypeProvider.class, m_oUnoObject); | |
| if ( xTypeProvider != null ) { | |
| aTypes = xTypeProvider.getTypes(); | |
| sTypeNames = new String[aTypes.length]; | |
| for (int i = 0; i < aTypes.length - 1; i++){ | |
| sTypeNames[i] = aTypes[i].getTypeName(); | |
| } | |
| } | |
| return sTypeNames; | |
| } | |
| public XListBox insertListBox(int _nPosX, int _nPosY, int _nHeight, int _nWidth, int _nStep, String[] _sStringItemList) { | |
| XListBox xListBox = null; | |
| try{ | |
| // create a unique name by means of an own implementation... | |
| String sName = createUniqueName(m_xDlgModelNameContainer, "ListBox"); | |
| // create a controlmodel at the multiservicefactory of the dialog model... | |
| Object oListBoxModel = m_xMSFDialogModel.createInstance("com.sun.star.awt.UnoControlListBoxModel"); | |
| XMultiPropertySet xLBModelMPSet = UnoRuntime.queryInterface(XMultiPropertySet.class, oListBoxModel); | |
| // Set the properties at the model - keep in mind to pass the property names in alphabetical order! | |
| xLBModelMPSet.setPropertyValues( | |
| new String[] {"Dropdown", "Height", "Name", "PositionX", "PositionY", "ReadOnly", "Step", "StringItemList", "Width" } , | |
| new Object[] {Boolean.FALSE, new Integer(_nHeight), sName, new Integer(_nPosX), new Integer(_nPosY), Boolean.TRUE, new Integer(_nStep), _sStringItemList, new Integer(_nWidth)}); | |
| m_xDlgModelNameContainer.insertByName(sName, xLBModelMPSet); | |
| }catch (com.sun.star.uno.Exception ex) { | |
| throw new java.lang.RuntimeException("cannot happen..."); | |
| } | |
| return xListBox; | |
| } | |
| public void insertMultiLineFixedText(int _nPosX, int _nPosY, int _nWidth, int _nLineCount, int _nStep, String _sLabel) { | |
| try { | |
| // create a unique name by means of an own implementation... | |
| String sName = createUniqueName(m_xDlgModelNameContainer, "Label"); | |
| int nHeight = _nLineCount * nFixedTextHeight; | |
| // create a controlmodel at the multiservicefactory of the dialog model... | |
| Object oFTModel = m_xMSFDialogModel.createInstance("com.sun.star.awt.UnoControlFixedTextModel"); | |
| XMultiPropertySet xFTModelMPSet = UnoRuntime.queryInterface(XMultiPropertySet.class, oFTModel); | |
| // Set the properties at the model - keep in mind to pass the property names in alphabetical order! | |
| xFTModelMPSet.setPropertyValues( | |
| new String[] {"Height", "Label", "MultiLine", "Name", "PositionX", "PositionY", "Step", "Width"}, | |
| new Object[] { new Integer(nHeight), _sLabel, Boolean.TRUE, sName, new Integer(_nPosX), new Integer(_nPosY), new Integer(_nStep), new Integer(_nWidth)}); | |
| // add the model to the NameContainer of the dialog model | |
| m_xDlgModelNameContainer.insertByName(sName, oFTModel); | |
| }catch (com.sun.star.uno.Exception ex){ | |
| /* perform individual exception handling here. | |
| * Possible exception types are: | |
| * com.sun.star.lang.IllegalArgumentException, | |
| * com.sun.star.lang.WrappedTargetException, | |
| * com.sun.star.container.ElementExistException, | |
| * com.sun.star.beans.PropertyVetoException, | |
| * com.sun.star.beans.UnknownPropertyException, | |
| * com.sun.star.uno.Exception | |
| */ | |
| ex.printStackTrace(System.out); | |
| } | |
| } | |
| }// end of class |