| /************************************************************** | |
| * | |
| * Licensed to the Apache Software Foundation (ASF) under one | |
| * or more contributor license agreements. See the NOTICE file | |
| * distributed with this work for additional information | |
| * regarding copyright ownership. The ASF licenses this file | |
| * to you under the Apache License, Version 2.0 (the | |
| * "License"); you may not use this file except in compliance | |
| * with the License. You may obtain a copy of the License at | |
| * | |
| * http://www.apache.org/licenses/LICENSE-2.0 | |
| * | |
| * Unless required by applicable law or agreed to in writing, | |
| * software distributed under the License is distributed on an | |
| * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY | |
| * KIND, either express or implied. See the License for the | |
| * specific language governing permissions and limitations | |
| * under the License. | |
| * | |
| *************************************************************/ | |
| // MARKER(update_precomp.py): autogen include statement, do not remove | |
| #include "precompiled_drawinglayer.hxx" | |
| #include <drawinglayer/processor3d/cutfindprocessor3d.hxx> | |
| #include <drawinglayer/primitive3d/drawinglayer_primitivetypes3d.hxx> | |
| #include <drawinglayer/primitive3d/transformprimitive3d.hxx> | |
| #include <drawinglayer/primitive3d/hatchtextureprimitive3d.hxx> | |
| #include <drawinglayer/primitive3d/polypolygonprimitive3d.hxx> | |
| #include <basegfx/polygon/b3dpolygon.hxx> | |
| #include <basegfx/polygon/b3dpolygontools.hxx> | |
| #include <basegfx/polygon/b3dpolypolygontools.hxx> | |
| #include <drawinglayer/primitive3d/hiddengeometryprimitive3d.hxx> | |
| ////////////////////////////////////////////////////////////////////////////// | |
| namespace drawinglayer | |
| { | |
| namespace processor3d | |
| { | |
| CutFindProcessor::CutFindProcessor(const geometry::ViewInformation3D& rViewInformation, | |
| const basegfx::B3DPoint& rFront, | |
| const basegfx::B3DPoint& rBack, | |
| bool bAnyHit) | |
| : BaseProcessor3D(rViewInformation), | |
| maFront(rFront), | |
| maBack(rBack), | |
| maResult(), | |
| maCombinedTransform(), | |
| mbAnyHit(bAnyHit), | |
| mbUseInvisiblePrimitiveContent(true) | |
| { | |
| } | |
| void CutFindProcessor::processBasePrimitive3D(const primitive3d::BasePrimitive3D& rCandidate) | |
| { | |
| if(getAnyHit() && maResult.size()) | |
| { | |
| // stop processing as soon as a hit was recognized | |
| return; | |
| } | |
| // it is a BasePrimitive3D implementation, use getPrimitive3DID() call for switch | |
| switch(rCandidate.getPrimitive3DID()) | |
| { | |
| case PRIMITIVE3D_ID_TRANSFORMPRIMITIVE3D : | |
| { | |
| // transform group. | |
| const primitive3d::TransformPrimitive3D& rPrimitive = static_cast< const primitive3d::TransformPrimitive3D& >(rCandidate); | |
| // remember old and transform front, back to object coordinates | |
| const basegfx::B3DPoint aLastFront(maFront); | |
| const basegfx::B3DPoint aLastBack(maBack); | |
| basegfx::B3DHomMatrix aInverseTrans(rPrimitive.getTransformation()); | |
| aInverseTrans.invert(); | |
| maFront *= aInverseTrans; | |
| maBack *= aInverseTrans; | |
| // remember current and create new transformation; add new object transform from right side | |
| const geometry::ViewInformation3D aLastViewInformation3D(getViewInformation3D()); | |
| const geometry::ViewInformation3D aNewViewInformation3D( | |
| aLastViewInformation3D.getObjectTransformation() * rPrimitive.getTransformation(), | |
| aLastViewInformation3D.getOrientation(), | |
| aLastViewInformation3D.getProjection(), | |
| aLastViewInformation3D.getDeviceToView(), | |
| aLastViewInformation3D.getViewTime(), | |
| aLastViewInformation3D.getExtendedInformationSequence()); | |
| updateViewInformation(aNewViewInformation3D); | |
| // #i102956# remember needed back-transform for found cuts (combine from right side) | |
| const basegfx::B3DHomMatrix aLastCombinedTransform(maCombinedTransform); | |
| maCombinedTransform = maCombinedTransform * rPrimitive.getTransformation(); | |
| // let break down | |
| process(rPrimitive.getChildren()); | |
| // restore transformations and front, back | |
| maCombinedTransform = aLastCombinedTransform; | |
| updateViewInformation(aLastViewInformation3D); | |
| maFront = aLastFront; | |
| maBack = aLastBack; | |
| break; | |
| } | |
| case PRIMITIVE3D_ID_POLYGONHAIRLINEPRIMITIVE3D : | |
| { | |
| // PolygonHairlinePrimitive3D, not used for hit test with planes, ignore. This | |
| // means that also thick line expansion will not be hit-tested as | |
| // PolyPolygonMaterialPrimitive3D | |
| break; | |
| } | |
| case PRIMITIVE3D_ID_HATCHTEXTUREPRIMITIVE3D : | |
| { | |
| // #i97321# | |
| // For HatchTexturePrimitive3D, do not use the decomposition since it will produce | |
| // clipped hatch lines in 3D. It can be used when the hatch also has a filling, but for | |
| // simplicity, just use the children which are the PolyPolygonMaterialPrimitive3D | |
| // which define the hatched areas anyways; for HitTest this is more than adequate | |
| const primitive3d::HatchTexturePrimitive3D& rPrimitive = static_cast< const primitive3d::HatchTexturePrimitive3D& >(rCandidate); | |
| process(rPrimitive.getChildren()); | |
| break; | |
| } | |
| case PRIMITIVE3D_ID_HIDDENGEOMETRYPRIMITIVE3D : | |
| { | |
| // HiddenGeometryPrimitive3D; the default decomposition would return an empty seqence, | |
| // so force this primitive to process it's children directly if the switch is set | |
| // (which is the default). Else, ignore invisible content | |
| const primitive3d::HiddenGeometryPrimitive3D& rHiddenGeometry(static_cast< const primitive3d::HiddenGeometryPrimitive3D& >(rCandidate)); | |
| const primitive3d::Primitive3DSequence& rChildren = rHiddenGeometry.getChildren(); | |
| if(rChildren.hasElements()) | |
| { | |
| if(getUseInvisiblePrimitiveContent()) | |
| { | |
| process(rChildren); | |
| } | |
| } | |
| break; | |
| } | |
| case PRIMITIVE3D_ID_UNIFIEDTRANSPARENCETEXTUREPRIMITIVE3D : | |
| { | |
| const primitive3d::UnifiedTransparenceTexturePrimitive3D& rPrimitive = static_cast< const primitive3d::UnifiedTransparenceTexturePrimitive3D& >(rCandidate); | |
| const primitive3d::Primitive3DSequence rChildren = rPrimitive.getChildren(); | |
| if(rChildren.getLength()) | |
| { | |
| if(1.0 <= rPrimitive.getTransparence()) | |
| { | |
| // not visible, but use for HitTest | |
| if(getUseInvisiblePrimitiveContent()) | |
| { | |
| process(rChildren); | |
| } | |
| } | |
| else if(rPrimitive.getTransparence() >= 0.0 && rPrimitive.getTransparence() < 1.0) | |
| { | |
| // visible; use content | |
| process(rChildren); | |
| } | |
| } | |
| break; | |
| } | |
| case PRIMITIVE3D_ID_POLYPOLYGONMATERIALPRIMITIVE3D : | |
| { | |
| // PolyPolygonMaterialPrimitive3D | |
| const primitive3d::PolyPolygonMaterialPrimitive3D& rPrimitive = static_cast< const primitive3d::PolyPolygonMaterialPrimitive3D& >(rCandidate); | |
| if(!maFront.equal(maBack)) | |
| { | |
| const basegfx::B3DPolyPolygon& rPolyPolygon = rPrimitive.getB3DPolyPolygon(); | |
| const sal_uInt32 nPolyCount(rPolyPolygon.count()); | |
| if(nPolyCount) | |
| { | |
| const basegfx::B3DPolygon aPolygon(rPolyPolygon.getB3DPolygon(0)); | |
| const sal_uInt32 nPointCount(aPolygon.count()); | |
| if(nPointCount > 2) | |
| { | |
| const basegfx::B3DVector aPlaneNormal(aPolygon.getNormal()); | |
| if(!aPlaneNormal.equalZero()) | |
| { | |
| const basegfx::B3DPoint aPointOnPlane(aPolygon.getB3DPoint(0)); | |
| double fCut(0.0); | |
| if(basegfx::tools::getCutBetweenLineAndPlane(aPlaneNormal, aPointOnPlane, maFront, maBack, fCut)) | |
| { | |
| const basegfx::B3DPoint aCutPoint(basegfx::interpolate(maFront, maBack, fCut)); | |
| if(basegfx::tools::isInside(rPolyPolygon, aCutPoint, false)) | |
| { | |
| // #i102956# add result. Do not forget to do this in the coordinate | |
| // system the processor get started with, so use the collected | |
| // combined transformation from processed TransformPrimitive3D's | |
| maResult.push_back(maCombinedTransform * aCutPoint); | |
| } | |
| } | |
| } | |
| } | |
| } | |
| } | |
| break; | |
| } | |
| default : | |
| { | |
| // process recursively | |
| process(rCandidate.get3DDecomposition(getViewInformation3D())); | |
| break; | |
| } | |
| } | |
| } | |
| } // end of namespace processor3d | |
| } // end of namespace drawinglayer | |
| ////////////////////////////////////////////////////////////////////////////// | |
| // eof |