boards/arm/tlsr82/tlsr8278adk80d/scripts/flash_boot_ble.ld

/****************************************************************************
 * board/arm/src/tlsr82/tlsr8278adk80d/scripts/flash_boot_ble.ld
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.  The
 * ASF licenses this file to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance with the
 * License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
 * License for the specific language governing permissions and limitations
 * under the License.
 *
 ****************************************************************************/

/* to tell the linker the program begin from __start label in cstartup.s,
 * thus do not treat it as a unused symbol
 */

ENTRY(__start)

SECTIONS
{
    . = 0x0;
    .vectors :
    {
        *(.vectors)

        /* MUST as follows, when compile with -ffunction-sections
         * -fdata-sections, session name may changed
         */

        *(.vectors.*)
    }

    .ram_code :
    {
        PROVIDE(_sramcode = ABSOLUTE(.));
        *(.ram_code)
        *(.ram_code.*)

        /* RF and system timer interrupt handler may call the libgcc
         * functions, to make sure the RF and system timer interrupt
         * handler do not execute flash code, copy all the libgcc code
         * to ram (exclude _divdi3, _udivdi3 and _umoddi3).
         */

        *libgcc.a:*(EXCLUDE_FILE(_divdi3.o _udivdi3.o _umoddi3.o) .text)

        /* Copy some scheduler related functions and read only data to ram
         * to improve the performance and make sure the RF and system timer
         * interrupt handler do not execute flash code.
         */

        *libarch.a:arm_interruptcontext.o(.text .text.*)
        *libarch.a:arm_doirq.o(.text .text.*)
        *libarch.a:arm_unblocktask.o(.text .text.*)
        *libarch.a:arm_blocktask.o(.text .text.*)

        *libsched.a:nx_start.o(.rodata .rodata.g_tasklisttable)
        *libsched.a:sem_post.o(.text .text.*)
        *libsched.a:nxsem_post.o(.text .text.*)
        *libsched.a:sem_wait.o(.text .text.*)
        *libsched.a:nxsem_wait.o(.text .text.*)
        *libsched.a:wd_cancel.o(.text .text.*)
        *libsched.a:sched_removeblocked.o(.text .text.*)
        *libsched.a:sched_addreadytorun.o(.text .text.*)
        *libsched.a:sched_addprioritized.o(.text .text.*)
        *libsched.a:sched_mergepending.o(.text .text.*)
        *libsched.a:sched_lock.o(.text .text.*)
        *libsched.a:sched_unlock.o(.text .text.*)
        *libsched.a:irq_dispatch.o(.text .text.*)

        /* Copy some libs fundamental functions to ram to improve the
         * performance.
         */

        *libc.a:dq_rem.o(.text .text.*)
        *libc.a:sq_remfirst.o(.text .text.*)
        *libc.a:sq_remafter.o(.text .text.*)
        *libc.a:lib_memcmp.o(.text .text.*)
        *libc.a:lib_memcpy.o(.text .text.*)
        *libc.a:lib_strlen.o(.text .text.*)
        *libc.a:lib_strcmp.o(.text .text.*)
        *libc.a:lib_strncmp.o(.text .text.*)

        /* Copy some zephyr ble functions to ram_code to improve the
         * performance.
         */

        *libapps.a:*.zblue.o(.text.work_queue_main)
        *libapps.a:*.zblue.o(.text.work_timeout)

        *libapps.a:*.zblue.o(.text.atomic_and)
        *libapps.a:*.zblue.o(.text.atomic_get)
        *libapps.a:*.zblue.o(.text.atomic_or)
        *libapps.a:*.zblue.o(.text.atomic_set)
        *libapps.a:*.zblue.o(.text.atomic_sub)

        *libapps.a:*.zblue.o(.text.arch_irq_lock)
        *libapps.a:*.zblue.o(.text.arch_irq_unlock)

        *libapps.a:*.zblue.o(.text.k_sem_give)

        *libapps.a:*.zblue.o(.text.net_buf_simple_add)
        *libapps.a:*.zblue.o(.text.net_buf_simple_pull)

        /* Copy some tinycrypt functions to ram_code to improve the
         * performance.
         */

        *libapps.a:*.tinycrypt.o(.text.uECC_vli_add)
        *libapps.a:*.tinycrypt.o(.text.uECC_vli_sub)
        *libapps.a:*.tinycrypt.o(.text.uECC_vli_set)
        PROVIDE(_eramcode = ABSOLUTE(.));
    }

    PROVIDE(_ramcode_size_ = . );
    PROVIDE(_ramcode_size_div_16_ = (. + 15 ) / 16);
    PROVIDE(_ramcode_size_div_256_ = (. + 255) / 256);
    PROVIDE(_ramcode_size_div_16_align_256_ = ( (. + 255) / 256) * 16);
    PROVIDE(_ramcode_size_align_256_ = ( (. + 255) / 256) * 256);

    . =  _ramcode_size_align_256_ ; /* >= (_ictag_start_ - 0x840000)*/

    .text :
    {
        PROVIDE(_stext = ABSOLUTE(.));
        *(.text)
        *(.text.*)
        PROVIDE(_etext = ABSOLUTE(.));
    }

    .rodata :
    {
        *(.rodata)
        *(.rodata.*)
    }

    . = ALIGN(4);
    PROVIDE(_rstored_ = . );
    PROVIDE(_code_size_ = .);

    /* __LOAD_FLASH for MCU RUN IN Flash 0x100 aligned, must greater
     * than or equal to : 0x808000 + ram_code_size + irq_vector(0x100) +
     * IC_tag(0x100) + IC_cache(0x800) == 0x808a00 + ram_code_size
     *
     * __LOAD_DUT for MCU RUN IN SRAM, this setting is used for DUT
     * Test and bin size is limited to 8k
     *
     * __LOAD_RAM for MCU RUN IN SRAM
     */

    . = (0x840000 + ((0x900 + _ramcode_size_align_256_) * __LOAD_FLASH) + (0x400 * __LOAD_DUT) + (_rstored_ * __LOAD_RAM));

    .retention_data : AT ( _rstored_ )
    {
        . = ALIGN(4);
        PROVIDE(_retention_data_start_ = . );
        *(.retention_data)
        *(.retention_data.*)
        . = ALIGN(4);
        PROVIDE(_retention_data_end_ = . );
    }
    PROVIDE(_dstored_ = _rstored_ + _retention_data_end_ - _retention_data_start_);

    .my_code(NOLOAD) :
    {
        *(.spi_slave_buff)
    }

    .data : AT ( _dstored_ )
    {
        . = ALIGN(4);
        PROVIDE(_start_data_ = . );
        *(.data);
        *(.data.*);
        . = ALIGN(4);
        KEEP(*(.info));
        KEEP(*(.info.*));
        . = ALIGN(4);
        PROVIDE(_end_data_ = . );
    }

    /* data in ram but no need to clean in .s*/

    .noinit (NOLOAD) :
    {
        . = ALIGN(4);
        *(.noinit)
        *(.noinit.*)
    }

    .bss :
    {
        . = ALIGN(4);
        PROVIDE(_sbss = .);
        *(.sbss)
        *(.sbss.*)
        *(.bss)
        *(.bss.*)
    }

    . = ALIGN(4);

    PROVIDE(_ebss = .);
    PROVIDE(_bin_size_ = _code_size_ + _end_data_ - _start_data_ + _retention_data_end_ - _retention_data_start_ );
    PROVIDE(_bin_size_div_16 = ( _bin_size_ + 15 ) / 16 );
    PROVIDE(_ictag_start_ = 0x840000 + _ramcode_size_align_256_ );
    PROVIDE(_ictag_end_ = 0x840000 + _ramcode_size_align_256_ + 0x100);
}