| # |
| # For a description of the syntax of this configuration file, |
| # see the file kconfig-language.txt in the NuttX tools repository. |
| # |
| |
| if ARCH_BOARD_STM32F429I_DISCO |
| |
| config STM32F429I_DISCO_FLASH |
| bool "MTD driver for external 8Mbyte SST25 FLASH on SPI4" |
| default n |
| select MTD |
| select MTD_SST25XX |
| select MTD_SMART |
| select FS_SMARTFS |
| select STM32_SPI4 |
| select MTD_BYTE_WRITE |
| ---help--- |
| Configures an MTD device for use with the onboard flash |
| |
| config STM32F429I_DISCO_FLASH_MINOR |
| int "Minor number for the FLASH /dev/smart entry" |
| default 0 |
| depends on STM32F429I_DISCO_FLASH |
| ---help--- |
| Sets the minor number for the FLASH MTD /dev entry |
| |
| config STM32F429I_DISCO_FLASH_PART |
| bool "Enable partition support on FLASH" |
| default n |
| depends on STM32F429I_DISCO_FLASH |
| ---help--- |
| Enables creation of partitions on the FLASH |
| |
| config STM32F429I_DISCO_FLASH_CONFIG_PART |
| bool "Create application config data partition on FLASH" |
| default y |
| depends on STM32F429I_DISCO_FLASH_PART |
| depends on PLATFORM_CONFIGDATA |
| ---help--- |
| Enables creation of a /dev/config partition on the FLASH |
| |
| config STM32F429I_DISCO_FLASH_CONFIG_PART_NUMBER |
| int "Index number of config partition (in list below)" |
| default 0 |
| depends on STM32F429I_DISCO_FLASH_CONFIG_PART |
| ---help--- |
| Specifies the index number of the config data partition |
| from the partition list. |
| |
| config STM32F429I_DISCO_FLASH_PART_LIST |
| string "Flash partition size list" |
| default "4,8188" |
| depends on STM32F429I_DISCO_FLASH_PART |
| ---help--- |
| Comma separated list of partition sizes in KB. |
| |
| config STM32F429I_DISCO_FLASH_PART_NAMES |
| string "Flash partition name list" |
| default "config,rfs" |
| depends on STM32F429I_DISCO_FLASH_PART |
| depends on MTD_PARTITION_NAMES |
| ---help--- |
| Comma separated list of partition names. |
| |
| config STM32F429I_DISCO_RAMMTD |
| bool "MTD driver for SMARTFS RAM disk" |
| default n |
| select MTD |
| select RAMMTD |
| ---help--- |
| Configures an MTD based RAM device for use with SMARTFS. |
| |
| config STM32F429I_DISCO_RAMMTD_MINOR |
| int "Minor number for RAM /dev/smart entry" |
| default 1 |
| depends on STM32F429I_DISCO_RAMMTD |
| ---help--- |
| Sets the minor number for the RAM MTD /dev entry |
| |
| config STM32F429I_DISCO_RAMMTD_SIZE |
| int "Size in KB of the RAM device to create" |
| default 32 |
| depends on STM32F429I_DISCO_RAMMTD |
| ---help--- |
| Sets the size of static RAM allocation for the SMART RAM device |
| |
| config STM32F429IDISCO_USBHOST_STACKSIZE |
| int "USB host waiter stack size" |
| default 1024 |
| depends on USBHOST |
| |
| config STM32F429IDISCO_USBHOST_PRIO |
| int "USB host waiter task priority" |
| default 100 |
| depends on USBHOST |
| |
| config PM_BUTTONS |
| bool "PM Button support" |
| default n |
| depends on PM && ARCH_IRQBUTTONS |
| ---help--- |
| Enable PM button EXTI interrupts to support PM testing |
| |
| config PM_BUTTON_ACTIVITY |
| int "Button PM activity weight" |
| default 10 |
| depends on PM_BUTTONS |
| ---help--- |
| The activity weight to report to the power management subsystem when a button is pressed. |
| |
| config PM_ALARM_SEC |
| int "PM_STANDBY delay (seconds)" |
| default 15 |
| depends on PM && RTC_ALARM |
| ---help--- |
| Number of seconds to wait in PM_STANDBY before going to PM_STANDBY mode. |
| |
| config PM_ALARM_NSEC |
| int "PM_STANDBY delay (nanoseconds)" |
| default 0 |
| depends on PM && RTC_ALARM |
| ---help--- |
| Number of additional nanoseconds to wait in PM_STANDBY before going to PM_STANDBY mode. |
| |
| config PM_SLEEP_WAKEUP |
| bool "PM_SLEEP wake-up alarm" |
| default n |
| depends on PM && RTC_ALARM |
| ---help--- |
| Wake-up of PM_SLEEP mode after a delay and resume normal operation. |
| |
| config PM_SLEEP_WAKEUP_SEC |
| int "PM_SLEEP delay (seconds)" |
| default 10 |
| depends on PM && RTC_ALARM |
| ---help--- |
| Number of seconds to wait in PM_SLEEP before going to PM_STANDBY mode. |
| |
| config PM_SLEEP_WAKEUP_NSEC |
| int "PM_SLEEP delay (nanoseconds)" |
| default 0 |
| depends on PM && RTC_ALARM |
| ---help--- |
| Number of additional nanoseconds to wait in PM_SLEEP before going to PM_STANDBY mode. |
| |
| menuconfig STM32F429I_DISCO_ILI9341 |
| bool "LCD driver for ILI9341 Liquid Crystal Display Controller" |
| default n |
| ---help--- |
| Enables support for a connected display based on ili9341 LCD Single Chip |
| Driver. This sub driver supports only communication with the display driver |
| connected via 4-wire serial (spi) mcu interface. |
| |
| if STM32F429I_DISCO_ILI9341 |
| |
| choice |
| prompt "LCD Interface Type" |
| default STM32F429I_DISCO_ILI9341_NONE if !LCD_ILI9341 && !STM32_LTDC |
| default STM32F429I_DISCO_ILI9341_LCDIFACE if LCD_ILI9341 && !STM32_LTDC |
| default STM32F429I_DISCO_ILI9341_FBIFACE if STM32_LTDC |
| |
| config STM32F429I_DISCO_ILI9341_NONE |
| bool "No LCD interface" |
| |
| config STM32F429I_DISCO_ILI9341_LCDIFACE |
| bool "Enable support for nuttx LCD interface" |
| depends on LCD_ILI9341 |
| ---help--- |
| Enable lcd driver support for the nuttx lcd interface. |
| |
| config STM32F429I_DISCO_ILI9341_FBIFACE |
| bool "Enable support for nuttx framebuffer interface" |
| depends on STM32_LTDC |
| ---help--- |
| Enable lcd driver support for the nuttx framebuffer interface to displaying |
| data via ltdc controller of the stm32f429i mcu. |
| |
| endchoice # LCD Interface Type |
| |
| if STM32F429I_DISCO_ILI9341_LCDIFACE |
| |
| config STM32F429I_DISCO_ILI9341_LCDDEVICE |
| int "LCD interface" |
| default 0 |
| range 0 1 |
| depends on STM32F429I_DISCO_ILI9341_LCDIFACE |
| ---help--- |
| Define the lcd interface which should be used. This must be |
| corresponding to the configured ili9341 LCD device in the driver |
| section. |
| |
| config STM32F429I_DISCO_ILI9341_SPIFREQUENCY |
| int "SPI frequency" |
| default 12000000 |
| ---help--- |
| Define the bus frequency of the SPI device. |
| |
| config STM32F429I_DISCO_ILI9341_SPIBITS16 |
| bool "Enable 16 bit pixel read/write" |
| default n |
| ---help--- |
| This enables faster 16-bit SPI mode for transmitting or receiving pixel data |
| to or from the display gram. But uses default 8-bit SPI mode for all other |
| display operations. |
| |
| endif # STM32F429I_DISCO_ILI9341_LCDIFACE |
| |
| if STM32F429I_DISCO_ILI9341_FBIFACE |
| |
| choice |
| prompt "LCD Orientation" |
| default STM32F429I_DISCO_ILI9341_FBIFACE_PORTRAIT |
| ---help--- |
| Configure display orientation. |
| |
| config STM32F429I_DISCO_ILI9341_FBIFACE_LANDSCAPE |
| bool "Landscape orientation" |
| ---help--- |
| Define for "landscape" orientation support. |
| |
| config STM32F429I_DISCO_ILI9341_FBIFACE_PORTRAIT |
| bool "Portrait orientation" |
| ---help--- |
| Define for "portrait" orientation support. |
| |
| config STM32F429I_DISCO_ILI9341_FBIFACE_RLANDSCAPE |
| bool "Reverse landscape orientation" |
| ---help--- |
| Define for "reverse landscape" orientation support. |
| |
| config STM32F429I_DISCO_ILI9341_FBIFACE_RORTRAIT |
| bool "Reverse portrait display" |
| ---help--- |
| Define for "reverse portrait" orientation support. |
| |
| endchoice |
| |
| endif # STM32F429I_DISCO_ILI9341_FBIFACE |
| endif # STM32F429I_DISCO_ILI9341 |
| |
| config STM32F429I_DISCO_HIGHPRI |
| bool "High priority interrupt test" |
| default n |
| |
| endif # ARCH_BOARD_STM32F429I_DISCO |
