blob: 4003623f443a051386d5c6f38ede5e99487b21b2 [file] [log] [blame]
/****************************************************************************
* arch/avr/src/at32uc3/at32uc3_config.h
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __ARCH_AVR_SRC_AT32UC3_AT32UC3_CONFIG_H
#define __ARCH_AVR_SRC_AT32UC3_AT32UC3_CONFIG_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include "chip.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* USART can be configured as a number of different devices (Only UART is
* supported here now, that will be extended).
* Check for consistency between USART enable options.
*/
#if AVR32_NUSART < 1
# undef CONFIG_AVR32_USART0
# undef CONFIG_AVR32_USART1
# undef CONFIG_AVR32_USART2
#endif
#if AVR32_NUSART < 2
# undef CONFIG_AVR32_USART1
# undef CONFIG_AVR32_USART2
#endif
#if AVR32_NUSART < 3
# undef CONFIG_AVR32_USART2
#endif
/* Not all USART features are supported on all chips or all USARTS */
#ifdef CONFIG_ARCH_CHIP_AT32UC3B
# undef CONFIG_AVR32_USART0_RS485
# undef CONFIG_AVR32_USART0_MAN
# undef CONFIG_AVR32_USART0_MODEM
# undef CONFIG_AVR32_USART0_IRDA
# undef CONFIG_AVR32_USART0_ISO786
# undef CONFIG_AVR32_USART1_RS485
# undef CONFIG_AVR32_USART2_RS485
# undef CONFIG_AVR32_USART2_MAN
# undef CONFIG_AVR32_USART2_MODEM
# undef CONFIG_AVR32_USART2_IRDA
# undef CONFIG_AVR32_USART2_ISO786
#endif
/* Disable configurations if USART not selected in configuration file */
#ifndef CONFIG_AVR32_USART0
# undef CONFIG_AVR32_USART0_RS232
# undef CONFIG_AVR32_USART0_SPI
# undef CONFIG_AVR32_USART0_RS485
# undef CONFIG_AVR32_USART0_MAN
# undef CONFIG_AVR32_USART0_MODEM
# undef CONFIG_AVR32_USART0_IRDA
# undef CONFIG_AVR32_USART0_ISO786
#endif
#ifndef CONFIG_AVR32_USART1
# undef CONFIG_AVR32_USART1_RS232
# undef CONFIG_AVR32_USART1_SPI
# undef CONFIG_AVR32_USART1_RS485
# undef CONFIG_AVR32_USART1_MAN
# undef CONFIG_AVR32_USART1_MODEM
# undef CONFIG_AVR32_USART1_IRDA
# undef CONFIG_AVR32_USART1_ISO786
#endif
#ifndef CONFIG_AVR32_USART2
# undef CONFIG_AVR32_USART2_RS232
# undef CONFIG_AVR32_USART2_SPI
# undef CONFIG_AVR32_USART2_RS485
# undef CONFIG_AVR32_USART2_MAN
# undef CONFIG_AVR32_USART2_MODEM
# undef CONFIG_AVR32_USART2_IRDA
# undef CONFIG_AVR32_USART2_ISO786
#endif
/* Is any UART configured? */
#if defined(CONFIG_AVR32_USART0_RS232) || \
defined(CONFIG_AVR32_USART1_RS232) || \
defined(CONFIG_AVR32_USART2_RS232)
# define HAVE_RS232_DEVICE
#else
# undef HAVE_RS232_DEVICE
#endif
/* Is there a serial console? */
#if defined(CONFIG_USART0_SERIAL_CONSOLE) && defined(CONFIG_AVR32_USART0_RS232)
# undef CONFIG_USART1_SERIAL_CONSOLE
# undef CONFIG_USART2_SERIAL_CONSOLE
# define HAVE_SERIAL_CONSOLE 1
#elif defined(CONFIG_USART1_SERIAL_CONSOLE) && defined(CONFIG_AVR32_USART1_RS232)
# undef CONFIG_USART0_SERIAL_CONSOLE
# undef CONFIG_USART2_SERIAL_CONSOLE
# define HAVE_SERIAL_CONSOLE 1
#elif defined(CONFIG_USART2_SERIAL_CONSOLE) && defined(CONFIG_AVR32_USART2_RS232)
# undef CONFIG_USART0_SERIAL_CONSOLE
# undef CONFIG_USART1_SERIAL_CONSOLE
# define HAVE_SERIAL_CONSOLE 1
#else
# undef CONFIG_USART0_SERIAL_CONSOLE
# undef CONFIG_USART1_SERIAL_CONSOLE
# undef CONFIG_USART2_SERIAL_CONSOLE
# undef HAVE_SERIAL_CONSOLE
#endif
/* Determine which (if any) console driver to use. If a console is enabled
* and no other console device is specified, then a serial console is
* assumed.
*/
#ifndef CONFIG_DEV_CONSOLE
# undef USE_SERIALDRIVER
# undef USE_EARLYSERIALINIT
#else
# if defined(CONFIG_CONSOLE_SYSLOG)
# undef USE_SERIALDRIVER
# undef USE_EARLYSERIALINIT
# elif defined(HAVE_RS232_DEVICE)
# define USE_SERIALDRIVER 1
# define USE_EARLYSERIALINIT 1
# else
# undef USE_SERIALDRIVER
# undef USE_EARLYSERIALINIT
# endif
#endif
/* If some other device is used as the console, then the serial driver may
* still be needed. Let's assume that if the upper half serial driver is
* built, then the lower half will also be needed. There is no need for
* the early serial initialization in this case.
*/
#if !defined(USE_SERIALDRIVER) && defined(CONFIG_STANDARD_SERIAL)
# define USE_SERIALDRIVER 1
#endif
/* If GPIO IRQ support is defined, then a set of GPIOs must all be included */
#if CONFIG_AVR32_GPIOIRQSETA == 0 && CONFIG_AVR32_GPIOIRQSETB == 0
# undef CONFIG_AVR32_GPIOIRQ
#endif
/****************************************************************************
* Public Types
****************************************************************************/
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Public Functions Prototypes
****************************************************************************/
#endif /* __ARCH_AVR_SRC_AT32UC3_AT32UC3_CONFIG_H */