| /**************************************************************************** |
| * arch/arm/src/kinetis/kinetis_config.h |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed to the Apache Software Foundation (ASF) under one or more |
| * contributor license agreements. See the NOTICE file distributed with |
| * this work for additional information regarding copyright ownership. The |
| * ASF licenses this file to you under the Apache License, Version 2.0 (the |
| * "License"); you may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the |
| * License for the specific language governing permissions and limitations |
| * under the License. |
| * |
| ****************************************************************************/ |
| |
| #ifndef __ARCH_ARM_SRC_KINETIS_KINETIS_CONFIG_H |
| #define __ARCH_ARM_SRC_KINETIS_KINETIS_CONFIG_H |
| |
| /**************************************************************************** |
| * Included Files |
| ****************************************************************************/ |
| |
| #include <nuttx/config.h> |
| #include <arch/board/board.h> |
| |
| #include "chip.h" |
| |
| /**************************************************************************** |
| * Pre-processor Definitions |
| ****************************************************************************/ |
| |
| /* Configuration ************************************************************/ |
| |
| /* Make sure that no unsupported UARTs are enabled */ |
| |
| #ifndef KINETIS_NLPUART |
| # define KINETIS_NLPUART 0 |
| #endif |
| |
| #ifndef KINETIS_NISO7816 |
| # define KINETIS_NISO7816 0 |
| #endif |
| |
| #if (KINETIS_NISO7816 + KINETIS_NUART) < 6 |
| # undef CONFIG_KINETIS_UART5 |
| # if (KINETIS_NISO7816 + KINETIS_NUART) < 5 |
| # undef CONFIG_KINETIS_UART4 |
| # if (KINETIS_NISO7816 + KINETIS_NUART) < 4 |
| # undef CONFIG_KINETIS_UART3 |
| # if (KINETIS_NISO7816 + KINETIS_NUART) < 3 |
| # undef CONFIG_KINETIS_UART2 |
| # if (KINETIS_NISO7816 + KINETIS_NUART) < 2 |
| # undef CONFIG_KINETIS_UART1 |
| # if (KINETIS_NISO7816 + KINETIS_NUART) < 1 |
| # undef CONFIG_KINETIS_UART0 |
| # endif |
| # endif |
| # endif |
| # endif |
| # endif |
| #endif |
| |
| #if KINETIS_NLPUART < 1 |
| # undef CONFIG_KINETIS_LPUART0 |
| #endif |
| #if KINETIS_NLPUART < 2 |
| # undef CONFIG_KINETIS_LPUART1 |
| #endif |
| #if KINETIS_NLPUART < 3 |
| # undef CONFIG_KINETIS_LPUART2 |
| #endif |
| #if KINETIS_NLPUART < 4 |
| # undef CONFIG_KINETIS_LPUART3 |
| #endif |
| #if KINETIS_NLPUART < 5 |
| # undef CONFIG_KINETIS_LPUART4 |
| #endif |
| |
| /* Are any UARTs or LPUARTs enabled? */ |
| |
| #undef HAVE_UART_DEVICE |
| #if defined(CONFIG_KINETIS_UART0) || defined(CONFIG_KINETIS_UART1) || \ |
| defined(CONFIG_KINETIS_UART2) || defined(CONFIG_KINETIS_UART3) || \ |
| defined(CONFIG_KINETIS_UART4) || defined(CONFIG_KINETIS_UART5) |
| # define HAVE_UART_DEVICE 1 |
| #endif |
| |
| #undef HAVE_LPUART_DEVICE |
| #if defined(CONFIG_KINETIS_LPUART0) || defined(CONFIG_KINETIS_LPUART1) || \ |
| defined(CONFIG_KINETIS_LPUART2) || defined(CONFIG_KINETIS_LPUART3) || \ |
| defined(CONFIG_KINETIS_LPUART4) |
| # define HAVE_LPUART_DEVICE 1 |
| #endif |
| |
| /* Is there a serial console? There should be at most one defined. |
| * It could be on any UARTn, n=0,1,2,3,4,5 |
| */ |
| |
| #undef HAVE_UART_CONSOLE |
| #undef HAVE_LPUART_CONSOLE |
| |
| #if defined(CONFIG_CONSOLE_SYSLOG) |
| # undef CONFIG_UART0_SERIAL_CONSOLE |
| # undef CONFIG_UART1_SERIAL_CONSOLE |
| # undef CONFIG_UART2_SERIAL_CONSOLE |
| # undef CONFIG_UART3_SERIAL_CONSOLE |
| # undef CONFIG_UART4_SERIAL_CONSOLE |
| # undef CONFIG_UART5_SERIAL_CONSOLE |
| # undef CONFIG_LPUART0_SERIAL_CONSOLE |
| # undef CONFIG_LPUART1_SERIAL_CONSOLE |
| # undef CONFIG_LPUART2_SERIAL_CONSOLE |
| # undef CONFIG_LPUART3_SERIAL_CONSOLE |
| # undef CONFIG_LPUART4_SERIAL_CONSOLE |
| #else |
| # if defined(CONFIG_UART0_SERIAL_CONSOLE) && defined(CONFIG_KINETIS_UART0) |
| # undef CONFIG_UART1_SERIAL_CONSOLE |
| # undef CONFIG_UART2_SERIAL_CONSOLE |
| # undef CONFIG_UART3_SERIAL_CONSOLE |
| # undef CONFIG_UART4_SERIAL_CONSOLE |
| # undef CONFIG_UART5_SERIAL_CONSOLE |
| # undef CONFIG_LPUART0_SERIAL_CONSOLE |
| # undef CONFIG_LPUART1_SERIAL_CONSOLE |
| # undef CONFIG_LPUART2_SERIAL_CONSOLE |
| # undef CONFIG_LPUART3_SERIAL_CONSOLE |
| # undef CONFIG_LPUART4_SERIAL_CONSOLE |
| # define HAVE_UART_CONSOLE 1 |
| # elif defined(CONFIG_UART1_SERIAL_CONSOLE) && defined(CONFIG_KINETIS_UART1) |
| # undef CONFIG_UART0_SERIAL_CONSOLE |
| # undef CONFIG_UART2_SERIAL_CONSOLE |
| # undef CONFIG_UART3_SERIAL_CONSOLE |
| # undef CONFIG_UART4_SERIAL_CONSOLE |
| # undef CONFIG_UART5_SERIAL_CONSOLE |
| # undef CONFIG_LPUART0_SERIAL_CONSOLE |
| # undef CONFIG_LPUART1_SERIAL_CONSOLE |
| # undef CONFIG_LPUART2_SERIAL_CONSOLE |
| # undef CONFIG_LPUART3_SERIAL_CONSOLE |
| # undef CONFIG_LPUART4_SERIAL_CONSOLE |
| # define HAVE_UART_CONSOLE 1 |
| # elif defined(CONFIG_UART2_SERIAL_CONSOLE) && defined(CONFIG_KINETIS_UART2) |
| # undef CONFIG_UART0_SERIAL_CONSOLE |
| # undef CONFIG_UART1_SERIAL_CONSOLE |
| # undef CONFIG_UART3_SERIAL_CONSOLE |
| # undef CONFIG_UART4_SERIAL_CONSOLE |
| # undef CONFIG_UART5_SERIAL_CONSOLE |
| # undef CONFIG_LPUART0_SERIAL_CONSOLE |
| # undef CONFIG_LPUART1_SERIAL_CONSOLE |
| # undef CONFIG_LPUART2_SERIAL_CONSOLE |
| # undef CONFIG_LPUART3_SERIAL_CONSOLE |
| # undef CONFIG_LPUART4_SERIAL_CONSOLE |
| # define HAVE_UART_CONSOLE 1 |
| # elif defined(CONFIG_UART3_SERIAL_CONSOLE) && defined(CONFIG_KINETIS_UART3) |
| # undef CONFIG_UART0_SERIAL_CONSOLE |
| # undef CONFIG_UART1_SERIAL_CONSOLE |
| # undef CONFIG_UART2_SERIAL_CONSOLE |
| # undef CONFIG_UART4_SERIAL_CONSOLE |
| # undef CONFIG_UART5_SERIAL_CONSOLE |
| # undef CONFIG_LPUART0_SERIAL_CONSOLE |
| # undef CONFIG_LPUART1_SERIAL_CONSOLE |
| # undef CONFIG_LPUART2_SERIAL_CONSOLE |
| # undef CONFIG_LPUART3_SERIAL_CONSOLE |
| # undef CONFIG_LPUART4_SERIAL_CONSOLE |
| # define HAVE_UART_CONSOLE 1 |
| # elif defined(CONFIG_UART4_SERIAL_CONSOLE) && defined(CONFIG_KINETIS_UART4) |
| # undef CONFIG_UART0_SERIAL_CONSOLE |
| # undef CONFIG_UART1_SERIAL_CONSOLE |
| # undef CONFIG_UART2_SERIAL_CONSOLE |
| # undef CONFIG_UART3_SERIAL_CONSOLE |
| # undef CONFIG_UART5_SERIAL_CONSOLE |
| # undef CONFIG_LPUART0_SERIAL_CONSOLE |
| # undef CONFIG_LPUART1_SERIAL_CONSOLE |
| # undef CONFIG_LPUART2_SERIAL_CONSOLE |
| # undef CONFIG_LPUART3_SERIAL_CONSOLE |
| # undef CONFIG_LPUART4_SERIAL_CONSOLE |
| # define HAVE_UART_CONSOLE 1 |
| # elif defined(CONFIG_UART5_SERIAL_CONSOLE) && defined(CONFIG_KINETIS_UART5) |
| # undef CONFIG_UART0_SERIAL_CONSOLE |
| # undef CONFIG_UART1_SERIAL_CONSOLE |
| # undef CONFIG_UART2_SERIAL_CONSOLE |
| # undef CONFIG_UART3_SERIAL_CONSOLE |
| # undef CONFIG_UART4_SERIAL_CONSOLE |
| # undef CONFIG_LPUART0_SERIAL_CONSOLE |
| # undef CONFIG_LPUART1_SERIAL_CONSOLE |
| # undef CONFIG_LPUART2_SERIAL_CONSOLE |
| # undef CONFIG_LPUART3_SERIAL_CONSOLE |
| # undef CONFIG_LPUART4_SERIAL_CONSOLE |
| # define HAVE_UART_CONSOLE 1 |
| # elif defined(CONFIG_LPUART0_SERIAL_CONSOLE) && defined(CONFIG_KINETIS_LPUART0) |
| # undef CONFIG_UART0_SERIAL_CONSOLE |
| # undef CONFIG_UART1_SERIAL_CONSOLE |
| # undef CONFIG_UART2_SERIAL_CONSOLE |
| # undef CONFIG_UART3_SERIAL_CONSOLE |
| # undef CONFIG_UART4_SERIAL_CONSOLE |
| # undef CONFIG_UART5_SERIAL_CONSOLE |
| # undef CONFIG_LPUART1_SERIAL_CONSOLE |
| # undef CONFIG_LPUART2_SERIAL_CONSOLE |
| # undef CONFIG_LPUART3_SERIAL_CONSOLE |
| # undef CONFIG_LPUART4_SERIAL_CONSOLE |
| # define HAVE_LPUART_CONSOLE 1 |
| # elif defined(CONFIG_LPUART1_SERIAL_CONSOLE) && defined(CONFIG_KINETIS_LPUART1) |
| # undef CONFIG_UART0_SERIAL_CONSOLE |
| # undef CONFIG_UART1_SERIAL_CONSOLE |
| # undef CONFIG_UART2_SERIAL_CONSOLE |
| # undef CONFIG_UART3_SERIAL_CONSOLE |
| # undef CONFIG_UART4_SERIAL_CONSOLE |
| # undef CONFIG_UART5_SERIAL_CONSOLE |
| # undef CONFIG_LPUART0_SERIAL_CONSOLE |
| # undef CONFIG_LPUART2_SERIAL_CONSOLE |
| # undef CONFIG_LPUART3_SERIAL_CONSOLE |
| # undef CONFIG_LPUART4_SERIAL_CONSOLE |
| # define HAVE_LPUART_CONSOLE 1 |
| # elif defined(CONFIG_LPUART2_SERIAL_CONSOLE) && defined(CONFIG_KINETIS_LPUART2) |
| # undef CONFIG_UART0_SERIAL_CONSOLE |
| # undef CONFIG_UART1_SERIAL_CONSOLE |
| # undef CONFIG_UART2_SERIAL_CONSOLE |
| # undef CONFIG_UART3_SERIAL_CONSOLE |
| # undef CONFIG_UART4_SERIAL_CONSOLE |
| # undef CONFIG_UART5_SERIAL_CONSOLE |
| # undef CONFIG_LPUART0_SERIAL_CONSOLE |
| # undef CONFIG_LPUART1_SERIAL_CONSOLE |
| # undef CONFIG_LPUART3_SERIAL_CONSOLE |
| # undef CONFIG_LPUART4_SERIAL_CONSOLE |
| # define HAVE_LPUART_CONSOLE 1 |
| # elif defined(CONFIG_LPUART3_SERIAL_CONSOLE) && defined(CONFIG_KINETIS_LPUART3) |
| # undef CONFIG_UART0_SERIAL_CONSOLE |
| # undef CONFIG_UART1_SERIAL_CONSOLE |
| # undef CONFIG_UART2_SERIAL_CONSOLE |
| # undef CONFIG_UART3_SERIAL_CONSOLE |
| # undef CONFIG_UART4_SERIAL_CONSOLE |
| # undef CONFIG_UART5_SERIAL_CONSOLE |
| # undef CONFIG_LPUART0_SERIAL_CONSOLE |
| # undef CONFIG_LPUART1_SERIAL_CONSOLE |
| # undef CONFIG_LPUART2_SERIAL_CONSOLE |
| # undef CONFIG_LPUART4_SERIAL_CONSOLE |
| # define HAVE_LPUART_CONSOLE 1 |
| # elif defined(CONFIG_LPUART4_SERIAL_CONSOLE) && defined(CONFIG_KINETIS_LPUART4) |
| # undef CONFIG_UART0_SERIAL_CONSOLE |
| # undef CONFIG_UART1_SERIAL_CONSOLE |
| # undef CONFIG_UART2_SERIAL_CONSOLE |
| # undef CONFIG_UART3_SERIAL_CONSOLE |
| # undef CONFIG_UART4_SERIAL_CONSOLE |
| # undef CONFIG_UART5_SERIAL_CONSOLE |
| # undef CONFIG_LPUART0_SERIAL_CONSOLE |
| # undef CONFIG_LPUART1_SERIAL_CONSOLE |
| # undef CONFIG_LPUART2_SERIAL_CONSOLE |
| # undef CONFIG_LPUART3_SERIAL_CONSOLE |
| # define HAVE_LPUART_CONSOLE 1 |
| # else |
| # ifdef CONFIG_DEV_CONSOLE |
| # warning "No valid CONFIG_[LP]UART[n]_SERIAL_CONSOLE Setting" |
| # endif |
| # undef CONFIG_UART0_SERIAL_CONSOLE |
| # undef CONFIG_UART1_SERIAL_CONSOLE |
| # undef CONFIG_UART2_SERIAL_CONSOLE |
| # undef CONFIG_UART3_SERIAL_CONSOLE |
| # undef CONFIG_UART4_SERIAL_CONSOLE |
| # undef CONFIG_UART5_SERIAL_CONSOLE |
| # undef CONFIG_LPUART0_SERIAL_CONSOLE |
| # undef CONFIG_LPUART1_SERIAL_CONSOLE |
| # undef CONFIG_LPUART2_SERIAL_CONSOLE |
| # undef CONFIG_LPUART3_SERIAL_CONSOLE |
| # undef CONFIG_LPUART4_SERIAL_CONSOLE |
| # endif |
| #endif |
| |
| /* Which version of up_putc() should be built? |
| * |
| * -------------------+------------------+----------------+------------------ |
| * HAVE_UART_DEVICE && HAVE_UART_DEVICE HAVE_LPUART_DEVICE |
| * HAVE_LPUART_DEVICE (only) (only) |
| * -------------------+------------------+----------------+------------------ |
| * HAVE_UART_CONSOLE kinetis_serial kinetis_serial (impossible) |
| * HAVE_LPUART_CONSOLE kinetis_lpserial (impossible) kinetis_lpserial |
| * No serial console kinetis_serial kinetis_serial kinetis_lpserial |
| * --------------------+------------------+----------------+----------------- |
| */ |
| |
| #undef HAVE_UART_PUTC |
| #undef HAVE_LPUART_PUTC |
| |
| #if defined(HAVE_LPUART_CONSOLE) |
| # define HAVE_LPUART_PUTC 1 |
| #elif defined(HAVE_UART_CONSOLE) |
| # define HAVE_UART_PUTC 1 |
| #elif defined(HAVE_UART_DEVICE) |
| # define HAVE_UART_PUTC 1 |
| #elif defined(HAVE_LPUART_DEVICE) |
| # define HAVE_LPUART_PUTC 1 |
| #endif |
| |
| /* Check UART flow control (Not yet supported) */ |
| |
| # undef CONFIG_UART0_FLOWCONTROL |
| # undef CONFIG_UART1_FLOWCONTROL |
| # undef CONFIG_UART2_FLOWCONTROL |
| # undef CONFIG_UART3_FLOWCONTROL |
| # undef CONFIG_UART4_FLOWCONTROL |
| # undef CONFIG_UART5_FLOWCONTROL |
| # undef CONFIG_LPUART0_FLOWCONTROL |
| # undef CONFIG_LPUART1_FLOWCONTROL |
| # undef CONFIG_LPUART2_FLOWCONTROL |
| # undef CONFIG_LPUART3_FLOWCONTROL |
| # undef CONFIG_LPUART4_FLOWCONTROL |
| |
| /* UART FIFO support is not fully implemented. |
| * |
| * NOTE: UART0 has an 8-byte deep FIFO; the other UARTs have no FIFOs |
| * (1-deep). There appears to be no way to know when the FIFO is not |
| * full (other than reading the FIFO length and comparing the FIFO count). |
| * Hence, the FIFOs are not used in this implementation and, as a result |
| * TDRE indeed mean that the single output buffer is available. |
| * |
| * Performance on UART0 could be improved by enabling the FIFO and by |
| * redesigning all of the FIFO status logic. |
| */ |
| |
| #undef CONFIG_KINETIS_UARTFIFOS |
| |
| /* Ethernet controller configuration */ |
| |
| #ifndef CONFIG_ENET_NRXBUFFERS |
| # define CONFIG_ENET_NRXBUFFERS 6 |
| #endif |
| #ifndef CONFIG_ENET_NTXBUFFERS |
| # define CONFIG_ENET_NTXBUFFERS 2 |
| #endif |
| |
| #ifndef CONFIG_ENET_PHYADDR |
| # define CONFIG_ENET_PHYADDR 1 |
| #endif |
| |
| #ifndef CONFIG_ENETNETHIFS |
| # define CONFIG_ENETNETHIFS 1 |
| #endif |
| |
| /**************************************************************************** |
| * Public Types |
| ****************************************************************************/ |
| |
| /**************************************************************************** |
| * Public Data |
| ****************************************************************************/ |
| |
| /**************************************************************************** |
| * Inline Functions |
| ****************************************************************************/ |
| |
| /**************************************************************************** |
| * Public Functions Prototypes |
| ****************************************************************************/ |
| |
| #endif /* __ARCH_ARM_SRC_KINETIS_KINETIS_CONFIG_H */ |
