boards/arm/stm32f0l0g0/nucleo-g071rb/src/stm32_bringup.c

/****************************************************************************
 * boards/arm/stm32f0l0g0/nucleo-g071rb/src/stm32_bringup.c
 *
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.  The
 * ASF licenses this file to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance with the
 * License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
 * License for the specific language governing permissions and limitations
 * under the License.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <sys/types.h>
#include <syslog.h>

#include <nuttx/board.h>
#include <nuttx/leds/userled.h>

#include "nucleo-g071rb.h"

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/

#undef HAVE_LEDS
#undef HAVE_DAC

#if !defined(CONFIG_ARCH_LEDS) && defined(CONFIG_USERLED_LOWER)
#  define HAVE_LEDS 1
#endif

#if defined(CONFIG_DAC)
#  define HAVE_DAC1 1
#  define HAVE_DAC2 1
#endif

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: stm32_bringup
 *
 * Description:
 *   Perform architecture-specific initialization
 *
 *   CONFIG_BOARD_LATE_INITIALIZE=y :
 *     Called from board_late_initialize().
 *
 *   CONFIG_BOARD_LATE_INITIALIZE=n && CONFIG_BOARDCTL=y :
 *     Called from the NSH library
 *
 ****************************************************************************/

int stm32_bringup(void)
{
  int ret;

#ifdef HAVE_LEDS
  /* Register the LED driver */

  ret = userled_lower_initialize(LED_DRIVER_PATH);
  if (ret < 0)
    {
      syslog(LOG_ERR, "ERROR: userled_lower_initialize() failed: %d\n",
             ret);
      return ret;
    }
#endif

#ifdef CONFIG_ADC
  /* Initialize ADC and register the ADC driver. */

  ret = stm32_adc_setup();
  if (ret < 0)
    {
      syslog(LOG_ERR, "ERROR: stm32_adc_setup failed: %d\n", ret);
    }
#endif

#ifdef CONFIG_DAC
  /* Initialize DAC and register the DAC driver. */

  ret = stm32_dac_setup();
  if (ret < 0)
    {
      syslog(LOG_ERR, "ERROR: stm32_dac_setup failed: %d\n", ret);
    }
#endif

#ifdef CONFIG_COMP
  /* Initialize COMP and register the COMP driver. */

  ret = stm32_comp_setup();
  if (ret < 0)
    {
      syslog(LOG_ERR, "ERROR: stm32_comp_setup failed: %d\n", ret);
    }
#endif

#ifdef CONFIG_OPAMP
  /* Initialize OPAMP and register the OPAMP driver. */

  ret = stm32_opamp_setup();
  if (ret < 0)
    {
      syslog(LOG_ERR, "ERROR: stm32_opamp_setup failed: %d\n", ret);
    }
#endif

#ifdef CONFIG_WL_NRF24L01
  ret = stm32_wlinitialize();
  if (ret < 0)
    {
      syslog(LOG_ERR, "ERROR: Failed to initialize wireless driver: %d\n",
             ret);
    }
#endif /* CONFIG_WL_NRF24L01 */

#ifdef CONFIG_LPWAN_SX127X
  ret = stm32_lpwaninitialize();
  if (ret < 0)
    {
      syslog(LOG_ERR, "ERROR: Failed to initialize wireless driver: %d\n",
             ret);
    }
#endif /* CONFIG_LPWAN_SX127X */

#ifdef CONFIG_CL_MFRC522
  ret = stm32_mfrc522initialize("/dev/rfid0");
  if (ret < 0)
    {
      syslog(LOG_ERR, "ERROR: stm32_mfrc522initialize() failed: %d\n", ret);
    }
#endif /* CONFIG_CL_MFRC522 */

  UNUSED(ret);
  return OK;
}