blob: 9ec71f38fab70718b0f2c26b133b03ad29d45246 [file] [log] [blame]
/****************************************************************************
* arch/arm/src/gd32f4/gd32f4xx_spi.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __ARCH_ARM_SRC_GD32F4_GD32F4XX_SPI_H
#define __ARCH_ARM_SRC_GD32F4_GD32F4XX_SPI_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/spi/spi.h>
#include "chip.h"
#include "hardware/gd32f4xx_spi.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Public Data
****************************************************************************/
struct spi_dev_s;
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
/****************************************************************************
* Name: gd32_spibus_initialize
*
* Description:
* Initialize the selected SPI bus
*
* Input Parameters:
* bus number (for hardware that has multiple SPI interfaces)
*
* Returned Value:
* Valid SPI device structure reference on success; a NULL on failure
*
****************************************************************************/
struct spi_dev_s *gd32_spibus_initialize(int bus);
/****************************************************************************
* Name: gd32_spibus_deinitialize
*
* Description:
* Deinitialize the selected SPI port
*
* Input Parameters:
* Port number (for hardware that has multiple SPI interfaces)
*
****************************************************************************/
void gd32_spibus_deinitialize(int port);
/****************************************************************************
* Name: gd32_spibus_deinitialize
*
* Description:
* Deinitialize the selected SPI port
*
* Input Parameters:
* Port number (for hardware that has multiple SPI interfaces)
*
****************************************************************************/
void gd32_spibus_deinitialize(int port);
/****************************************************************************
* Name: gd32_spi[n] select and gd32_spi[n] status
*
* Description:
* The external functions, gd32_spi[n]select, gd32_spi[n]status,
* and gd32_spi[n]cmddata must be provided by board-specific logic.
* These are implementations of the select, status, and cmddata methods of
* the SPI interface defined by struct spi_ops_s (see
* include/nuttx/spi/spi.h). All other methods (including
* gd32_spibus_initialize()) are provided by common GD32F4 logic.
* To use this common SPI logic on your board:
*
* 1. Provide logic in gd32_boardinitialize() to configure SPI chip
* select pins.
* 2. Provide gd32_spi[n]select() and gd32_spi[n] status() functions
* in your board-specific logic. These functions will perform chip
* selection and status operations using GPIOs in the way your board
* is configured.
* 3. If CONFIG_SPI_CMDDATA is defined in the NuttX configuration, then
* provide gd32_spi[n]cmddata() functions in your board-specific
* logic. These functions will perform cmd/data selection operations
* using GPIOs in the way your board is configured.
* 4. Add a calls to gd32_spibus_initialize() in your low level
* application initialization logic
* 5. The handle returned by gd32_spibus_initialize() may then be used to
* bind the SPI driver to higher level logic (e.g., calling
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
* the SPI MMC/SD driver).
*
****************************************************************************/
#ifdef CONFIG_GD32F4_SPI0
void gd32_spi0select(struct spi_dev_s *dev, uint32_t devid,
bool selected);
uint8_t gd32_spi0status(struct spi_dev_s *dev, uint32_t devid);
int gd32_spi0cmddata(struct spi_dev_s *dev, uint32_t devid, bool cmd);
#endif
#ifdef CONFIG_GD32F4_SPI1
void gd32_spi1select(struct spi_dev_s *dev, uint32_t devid,
bool selected);
uint8_t gd32_spi1status(struct spi_dev_s *dev, uint32_t devid);
int gd32_spi1cmddata(struct spi_dev_s *dev, uint32_t devid, bool cmd);
#endif
#ifdef CONFIG_GD32F4_SPI2
void gd32_spi2select(struct spi_dev_s *dev, uint32_t devid,
bool selected);
uint8_t gd32_spi2status(struct spi_dev_s *dev, uint32_t devid);
int gd32_spi2cmddata(struct spi_dev_s *dev, uint32_t devid, bool cmd);
#endif
#ifdef CONFIG_GD32F4_SPI3
void gd32_spi3select(struct spi_dev_s *dev, uint32_t devid,
bool selected);
uint8_t gd32_spi3status(struct spi_dev_s *dev, uint32_t devid);
int gd32_spi3cmddata(struct spi_dev_s *dev, uint32_t devid, bool cmd);
#endif
#ifdef CONFIG_GD32F4_SPI4
void gd32_spi4select(struct spi_dev_s *dev, uint32_t devid,
bool selected);
uint8_t gd32_spi4status(struct spi_dev_s *dev, uint32_t devid);
int gd32_spi4cmddata(struct spi_dev_s *dev, uint32_t devid, bool cmd);
#endif
#ifdef CONFIG_GD32F4_SPI5
void gd32_spi5select(struct spi_dev_s *dev, uint32_t devid,
bool selected);
uint8_t gd32_spi5status(struct spi_dev_s *dev, uint32_t devid);
int gd32_spi5cmddata(struct spi_dev_s *dev, uint32_t devid, bool cmd);
#endif
/****************************************************************************
* Name: gd32_spi[n]register
*
* Description:
* If the board supports a card detect callback to inform the SPI-based
* MMC/SD driver when an SD card is inserted or removed, then
* CONFIG_SPI_CALLBACK should be defined and the following function(s)
* must be implemented. These functions implements the registercallback
* method of the SPI interface (see include/nuttx/spi/spi.h for details)
*
* Input Parameters:
* dev - Device-specific state data
* callback - The function to call on the media change
* arg - A caller provided value to return with the callback
*
* Returned Value:
* 0 on success; negated errno on failure.
*
****************************************************************************/
#ifdef CONFIG_SPI_CALLBACK
#ifdef CONFIG_GD32F4_SPI0
int gd32_spi0register(struct spi_dev_s *dev, spi_mediachange_t callback,
void *arg);
#endif
#ifdef CONFIG_GD32F4_SPI1
int gd32_spi1register(struct spi_dev_s *dev, spi_mediachange_t callback,
void *arg);
#endif
#ifdef CONFIG_GD32F4_SPI2
int gd32_spi2register(struct spi_dev_s *dev, spi_mediachange_t callback,
void *arg);
#endif
#ifdef CONFIG_GD32F4_SPI3
int gd32_spi3register(struct spi_dev_s *dev, spi_mediachange_t callback,
void *arg);
#endif
#ifdef CONFIG_GD32F4_SPI4
int gd32_spi4register(struct spi_dev_s *dev, spi_mediachange_t callback,
void *arg);
#endif
#ifdef CONFIG_GD32F4_SPI5
int gd32_spi5register(struct spi_dev_s *dev, spi_mediachange_t callback,
void *arg);
#endif
#endif
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_ARM_SRC_GD32F4_GD32F4XX_SPI_H */