arch/arm/src/stm32l5/stm32l5_rcc.c

/****************************************************************************
 * arch/arm/src/stm32l5/stm32l5_rcc.c
 *
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.  The
 * ASF licenses this file to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance with the
 * License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
 * License for the specific language governing permissions and limitations
 * under the License.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <stdint.h>
#include <stdio.h>
#include <assert.h>
#include <debug.h>

#include <arch/board/board.h>

#include "arm_internal.h"
#include "chip.h"
#include "stm32l5_rcc.h"
#include "stm32l5_flash.h"
#include "stm32l5.h"
#include "stm32l5_waste.h"

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/

/* Allow up to 100 milliseconds for the high speed clock to become ready.
 * that is a very long delay, but if the clock does not become ready we are
 * hosed anyway.
 */

#define HSERDY_TIMEOUT (100 * CONFIG_BOARD_LOOPSPERMSEC)

/****************************************************************************
 * Private Data
 ****************************************************************************/

/****************************************************************************
 * Private Functions
 ****************************************************************************/

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name
 *
 * Description
 *   The RTC needs to reset the Backup Domain to change RTCSEL and resetting
 *   the Backup Domain renders to disabling the LSE as consequence.   In
 *   order to avoid resetting the Backup Domain when we already configured
 *   LSE we will reset the Backup Domain early (here).
 *
 * Input Parameters
 *   None
 *
 * Returned Value
 *   None
 *
 ****************************************************************************/

#if defined(CONFIG_STM32L5_PWR) && defined(CONFIG_STM32L5_RTC)
static inline void rcc_resetbkp(void)
{
  bool init_stat;

  /* Check if the RTC is already configured */

  init_stat = stm32l5_rtc_is_initialized();
  if (!init_stat)
    {
      uint32_t bkregs[STM32L5_RTC_BKCOUNT];
      int i;

      /* Backup backup-registers before RTC reset. */

      for (i = 0; i < STM32L5_RTC_BKCOUNT; i++)
        {
          bkregs[i] = getreg32(STM32L5_RTC_BKR(i));
        }

      /* Enable write access to the backup domain (RTC registers, RTC
       * backup data registers and backup SRAM).
       */

      stm32l5_pwr_enablebkp(true);

      /* We might be changing RTCSEL - to ensure such changes work, we must
       * reset the backup domain (having backed up the RTC_MAGIC token)
       */

      modifyreg32(STM32L5_RCC_BDCR, 0, RCC_BDCR_BDRST);
      modifyreg32(STM32L5_RCC_BDCR, RCC_BDCR_BDRST, 0);

      /* Restore backup-registers, except RTC related. */

      for (i = 0; i < STM32L5_RTC_BKCOUNT; i++)
        {
          if (RTC_MAGIC_REG == STM32L5_RTC_BKR(i))
            {
              continue;
            }

          putreg32(bkregs[i], STM32L5_RTC_BKR(i));
        }

      stm32l5_pwr_enablebkp(false);
    }
}
#else
#  define rcc_resetbkp()
#endif

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name
 *
 * Description
 *   Called to establish the clock settings based on the values in board.h.
 *   This function (by default) will reset most everything, enable the PLL,
 *   and enable peripheral clocking for all peripherals enabled in the NuttX
 *   configuration file.
 *
 *   If CONFIG_ARCH_BOARD_STM32L5_CUSTOM_CLOCKCONFIG is defined, then
 *   clocking will be enabled by an externally provided, board-specific
 *   function called stm32l5_board_clockconfig().
 *
 * Input Parameters
 *   None
 *
 * Returned Value
 *   None
 *
 ****************************************************************************/

void stm32l5_clockconfig(void)
{
#if 0
  /* Make sure that we are starting in the reset state */

  rcc_reset();

  /* Reset backup domain if appropriate */

  rcc_resetbkp();
#endif
#if defined(CONFIG_ARCH_BOARD_STM32L5_CUSTOM_CLOCKCONFIG)

  /* Invoke Board Custom Clock Configuration */

  stm32l5_board_clockconfig();

#else

  /* Invoke standard, fixed clock configuration based on definitions in
   * board.h
   */

  stm32l5_stdclockconfig();

#endif

  /* Enable peripheral clocking */

  stm32l5_rcc_enableperipherals();
}

/****************************************************************************
 * Name
 *
 * Description
 *   Re-enable the clock and restore the clock settings based on settings in
 *   board.h.  This function is only available to support low-power modes of
 *   operation
 *   re-enable/re-start the PLL
 *
 *   This function performs a subset of the operations performed by
 *   stm32l5_clockconfig()
 *   reset the currently enabled peripheral clocks.
 *
 *   If CONFIG_ARCH_BOARD_STM32L5_CUSTOM_CLOCKCONFIG is defined, then
 *   clocking will be enabled by an externally provided, board-specific
 *   function called stm32l5_board_clockconfig().
 *
 * Input Parameters
 *   None
 *
 * Returned Value
 *   None
 *
 ****************************************************************************/

#ifdef CONFIG_PM
void stm32l5_clockenable(void)
{
#if defined(CONFIG_ARCH_BOARD_STM32L5_CUSTOM_CLOCKCONFIG)

  /* Invoke Board Custom Clock Configuration */

  stm32l5_board_clockconfig();

#else

  /* Invoke standard, fixed clock configuration based on definitions in
   * board.h
   */

  stm32l5_stdclockconfig();

#endif
}
#endif