| # |
| # For a description of the syntax of this configuration file, |
| # see the file kconfig-language.txt in the NuttX tools repository. |
| # |
| |
| if ARCH_BOARD_MIKROE_STM32F4 |
| |
| config MIKROE_FLASH |
| bool "MTD driver for onboard 1M FLASH" |
| default n |
| select MTD |
| select MTD_M25P |
| select MTD_SMART |
| select FS_SMARTFS |
| select STM32_SPI3 |
| select MTD_BYTE_WRITE |
| ---help--- |
| Configures an MTD device for use with the onboard flash |
| |
| config MIKROE_FLASH_MINOR |
| int "Minor number for the FLASH /dev/smart entry" |
| default 0 |
| depends on MIKROE_FLASH |
| ---help--- |
| Sets the minor number for the FLASH MTD /dev entry |
| |
| config MIKROE_FLASH_PART |
| bool "Enable partition support on FLASH" |
| default n |
| depends on MIKROE_FLASH |
| ---help--- |
| Enables creation of partitions on the FLASH |
| |
| config MIKROE_FLASH_CONFIG_PART |
| bool "Create application config data partition on FLASH" |
| default y |
| depends on MIKROE_FLASH_PART |
| depends on PLATFORM_CONFIGDATA |
| ---help--- |
| Enables creation of a /dev/config partition on the FLASH |
| |
| config MIKROE_FLASH_CONFIG_PART_NUMBER |
| int "Index number of config partition (in list below)" |
| default 0 |
| depends on MIKROE_FLASH_CONFIG_PART |
| ---help--- |
| Specifies the index number of the config data partition |
| from the partition list. |
| |
| config MIKROE_FLASH_PART_LIST |
| string "Flash partition size list" |
| default "8,248,768" |
| depends on MIKROE_FLASH_PART |
| ---help--- |
| Comma separated list of partition sizes in KB. |
| |
| config MIKROE_RAMMTD |
| bool "MTD driver for SMARTFS RAM disk" |
| default n |
| select MTD |
| select RAMMTD |
| ---help--- |
| Configures an MTD based RAM device for use with SMARTFS. |
| |
| config MIKROE_RAMMTD_MINOR |
| int "Minor number for RAM /dev/smart entry" |
| default 1 |
| depends on MIKROE_RAMMTD |
| ---help--- |
| Sets the minor number for the RAM MTD /dev entry |
| |
| config MIKROE_RAMMTD_SIZE |
| int "Size in KB of the RAM device to create" |
| default 32 |
| depends on MIKROE_RAMMTD |
| ---help--- |
| Sets the size of static RAM allocation for the SMART RAM device |
| |
| config MIKROE_QETIMER |
| int "Timer to use with QE encoder" |
| default 3 |
| depends on SENSORS_QENCODER |
| |
| config PM_ALARM_SEC |
| int "PM_STANDBY delay (seconds)" |
| default 15 |
| depends on PM && RTC_ALARM |
| ---help--- |
| Number of seconds to wait in PM_STANDBY before going to PM_STANDBY mode. |
| |
| config PM_ALARM_NSEC |
| int "PM_STANDBY delay (nanoseconds)" |
| default 0 |
| depends on PM && RTC_ALARM |
| ---help--- |
| Number of additional nanoseconds to wait in PM_STANDBY before going to PM_STANDBY mode. |
| |
| config PM_SLEEP_WAKEUP |
| bool "PM_SLEEP wake-up alarm" |
| default n |
| depends on PM && RTC_ALARM |
| ---help--- |
| Wake-up of PM_SLEEP mode after a delay and resume normal operation. |
| |
| config PM_SLEEP_WAKEUP_SEC |
| int "PM_SLEEP delay (seconds)" |
| default 10 |
| depends on PM && RTC_ALARM |
| ---help--- |
| Number of seconds to wait in PM_SLEEP before going to PM_STANDBY mode. |
| |
| config PM_SLEEP_WAKEUP_NSEC |
| int "PM_SLEEP delay (nanoseconds)" |
| default 0 |
| depends on PM && RTC_ALARM |
| ---help--- |
| Number of additional nanoseconds to wait in PM_SLEEP before going to PM_STANDBY mode. |
| |
| endif |
