| /**************************************************************************** |
| * drivers/net/e1000.h |
| * |
| * Copyright (C) 2011 Yu Qiang. All rights reserved. |
| * Author: Yu Qiang <yuq825@gmail.com> |
| * |
| * This file is a part of NuttX: |
| * |
| * Copyright (C) 2011 Gregory Nutt. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * 3. Neither the name NuttX nor the names of its contributors may be |
| * used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
| * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
| * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
| * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED |
| * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN |
| * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| * |
| ****************************************************************************/ |
| |
| #ifndef __DRIVERS_NET_E1000_H |
| #define __DRIVERS_NET_E1000_H |
| |
| /**************************************************************************** |
| * Included Files |
| ****************************************************************************/ |
| |
| #include <rgmp/types.h> |
| #include <rgmp/trap.h> |
| #include <rgmp/arch/arch.h> |
| |
| /**************************************************************************** |
| * Pre-processor Definitions |
| ****************************************************************************/ |
| |
| /************** PCI ID ***************/ |
| |
| #define INTEL_VENDERID 0x8086 |
| #define E1000_82573L 0x109a |
| #define E1000_82540EM 0x100e |
| #define E1000_82574L 0x10d3 |
| #define E1000_82567LM 0x10f5 |
| #define E1000_82541PI 0x107c |
| |
| /**************************************************************************** |
| * Public Types |
| ****************************************************************************/ |
| |
| enum e1000_registers { |
| E1000_CTRL = 0x0000, // Device Control |
| E1000_STATUS = 0x0008, // Device Status |
| E1000_CTRL_EXT = 0x0018, // Device Control Extension |
| E1000_FCAL = 0x0028, // Flow Control Address Low |
| E1000_FCAH = 0x002C, // Flow Control Address High |
| E1000_FCT = 0x0030, // Flow Control Type |
| E1000_ICR = 0x00C0, // Interrupt Cause Read |
| E1000_ICS = 0x00C8, // Interrupt Cause Set |
| E1000_IMS = 0x00D0, // Interrupt Mask Set |
| E1000_IMC = 0x00D8, // Interrupt Mask Clear |
| E1000_RCTL = 0x0100, // Receive Control |
| E1000_FCTTV = 0x0170, // Flow Control Transmit Timer Value |
| E1000_TCTL = 0x0400, // Transmit Control |
| E1000_PBA = 0x1000, // Packet Buffer Allocation |
| E1000_FCRTL = 0x2160, // Flow Control Receive Threshold Low |
| E1000_FCRTH = 0x2168, // Flow Control Receive Threshold High |
| E1000_RDBAL = 0x2800, // Rx Descriptor Base Address Low |
| E1000_RDBAH = 0x2804, // Rx Descriptor Base Address High |
| E1000_RDLEN = 0x2808, // Rx Descriptor Length |
| E1000_RDH = 0x2810, // Rx Descriptor Head |
| E1000_RDT = 0x2818, // Rx Descriptor Tail |
| E1000_RXDCTL = 0x2828, // Rx Descriptor Control |
| E1000_TDBAL = 0x3800, // Tx Descriptor Base Address Low |
| E1000_TDBAH = 0x3804, // Tx Descriptor Base Address High |
| E1000_TDLEN = 0x3808, // Tx Descriptor Length |
| E1000_TDH = 0x3810, // Tx Descriptor Head |
| E1000_TDT = 0x3818, // Tx Descriptor Tail |
| E1000_TXDCTL = 0x3828, // Tx Descriptor Control |
| E1000_TPR = 0x40D0, // Total Packets Received |
| E1000_TPT = 0x40D4, // Total Packets Transmitted |
| E1000_RA = 0x5400, // Receive-filter Array |
| }; |
| |
| /***************** e1000 device structure *****************/ |
| |
| struct tx_desc { |
| uint64_t base_address; |
| uint16_t packet_length; |
| uint8_t cksum_offset; |
| uint8_t desc_command; |
| uint8_t desc_status; |
| uint8_t cksum_origin; |
| uint16_t special_info; |
| }; |
| |
| struct rx_desc { |
| uint64_t base_address; |
| uint16_t packet_length; |
| uint16_t packet_cksum; |
| uint8_t desc_status; |
| uint8_t desc_errors; |
| uint16_t vlan_tag; |
| }; |
| |
| #endif |