Google Git
Sign in
apache / nuttx / 350fa87fea6df20a7c470330d88222cee8cd6df0 / . / drivers / input / stmpe811_tsc.c
blob: a3f557aab6f52bccf377f7215ed59498d8d6556f [file] [log] [blame]
/****************************************************************************
* drivers/input/stmpe811_tsc.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* References:
* "STMPE811 S-Touch® advanced resistive touchscreen controller with 8-bit
* GPIO expander," Doc ID 14489 Rev 6, CD00186725, STMicroelectronics"
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdbool.h>
#include <stdio.h>
#include <unistd.h>
#include <string.h>
#include <fcntl.h>
#include <semaphore.h>
#include <poll.h>
#include <errno.h>
#include <assert.h>
#include <debug.h>
#include <nuttx/kmalloc.h>
#include <nuttx/arch.h>
#include <nuttx/fs/fs.h>
#include <nuttx/i2c.h>
#include <nuttx/wqueue.h>
#include <nuttx/arch.h>
#include <nuttx/input/touchscreen.h>
#include <nuttx/input/stmpe811.h>
#include "stmpe811.h"
#if defined(CONFIG_INPUT) && defined(CONFIG_INPUT_STMPE811) && !defined(CONFIG_STMPE811_TSC_DISABLE)
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#define Direction_IN 0x00
#define Direction_OUT 0x01
#define Polarity_Low 0x00
#define Polarity_High 0x04
#define Type_Level 0x00
#define Type_Edge 0x02
#define IO_IT_0 0x01
#define IO_IT_1 0x02
#define IO_IT_2 0x04
#define IO_IT_3 0x08
#define IO_IT_4 0x10
#define IO_IT_5 0x20
#define IO_IT_6 0x40
#define IO_IT_7 0x80
#define ALL_IT 0xFF
#define IOE_JOY_IT (uint8_t)(IO_IT_3 | IO_IT_4 | IO_IT_5 | IO_IT_6 | IO_IT_7)
#define IOE_TS_IT (uint8_t)(IO_IT_0 | IO_IT_1 | IO_IT_2)
#define IOE_INMEMS_IT (uint8_t)(IO_IT_2 | IO_IT_3)
#define EDGE_FALLING 0x01
#define EDGE_RISING 0x02
#define TIMEOUT_MAX 0x3000 /*<! The value of the maximal timeout for I2C waiting loops */
/****************************************************************************
* Private Types
****************************************************************************/
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* Internal logic */
static void stmpe811_notify(FAR struct stmpe811_dev_s *priv);
static int stmpe811_sample(FAR struct stmpe811_dev_s *priv,
FAR struct stmpe811_sample_s *sample);
static inline int stmpe811_waitsample(FAR struct stmpe811_dev_s *priv,
FAR struct stmpe811_sample_s *sample);
/* Character driver methods */
static int stmpe811_open(FAR struct file *filep);
static int stmpe811_close(FAR struct file *filep);
static ssize_t stmpe811_read(FAR struct file *filep, FAR char *buffer,
size_t len);
static int stmpe811_ioctl(FAR struct file *filep, int cmd,
unsigned long arg);
#ifndef CONFIG_DISABLE_POLL
static int stmpe811_poll(FAR struct file *filep, struct pollfd *fds,
bool setup);
#endif
/* Initialization logic */
static inline void stmpe811_tscinitialize(FAR struct stmpe811_dev_s *priv);
/****************************************************************************
* Private Data
****************************************************************************/
/* This the vtable that supports the character driver interface */
static const struct file_operations g_stmpe811fops =
{
stmpe811_open, /* open */
stmpe811_close, /* close */
stmpe811_read, /* read */
0, /* write */
0, /* seek */
stmpe811_ioctl /* ioctl */
#ifndef CONFIG_DISABLE_POLL
, stmpe811_poll /* poll */
#endif
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: stmpe811_notify
*
* Description:
* Notify any threads waiting on touchscreen data that data is now
* available for reading.
*
****************************************************************************/
static void stmpe811_notify(FAR struct stmpe811_dev_s *priv)
{
#ifndef CONFIG_DISABLE_POLL
int i;
#endif
/* If there are threads waiting for read data, then signal one of them
* that the read data is available.
*/
if (priv->nwaiters > 0)
{
/* After posting this semaphore, we need to exit because the STMPE811
* is no longer available.
*/
sem_post(&priv->waitsem);
}
/* If there are threads waiting on poll() for STMPE811 data to become available,
* then wake them up now. NOTE: we wake up all waiting threads because we
* do not know that they are going to do. If they all try to read the data,
* then some make end up blocking after all.
*/
#ifndef CONFIG_DISABLE_POLL
for (i = 0; i < CONFIG_STMPE811_NPOLLWAITERS; i++)
{
struct pollfd *fds = priv->fds[i];
if (fds)
{
fds->revents |= POLLIN;
ivdbg("Report events: %02x\n", fds->revents);
sem_post(fds->sem);
}
}
#endif
}
/****************************************************************************
* Name: stmpe811_sample
*
* Description:
* Check if touchscreen sample data is available now and, if so, return
* the sample data. This is part of the stmpe811_read logic.
*
* Assumption:
* Pre-emption is disable to prevent the worker thread from running.
* Otherwise, sampled data may continue to change.
*
****************************************************************************/
static int stmpe811_sample(FAR struct stmpe811_dev_s *priv,
FAR struct stmpe811_sample_s *sample)
{
int ret = -EAGAIN;
/* Is there new STMPE811 sample data available? */
if (priv->penchange)
{
/* Yes.. the state has changed in some way. Return a copy of the
* sampled data.
*/
memcpy(sample, &priv->sample, sizeof(struct stmpe811_sample_s));
/* Now manage state transitions */
if (sample->contact == CONTACT_UP)
{
/* The sampling logic has detected pen-up in some condition other
* than CONTACT_NONE. Set the next state to CONTACT_NONE: Further
* pen-down reports will be ignored. Increment the ID so that
* next contact ID will be unique
*/
priv->sample.contact = CONTACT_NONE;
priv->sample.valid = false;
priv->id++;
}
else if (sample->contact == CONTACT_DOWN)
{
/* The sampling logic has detected pen-up in some condition other
* than CONTACT_MOVE. Set the next state to CONTACT_MOVE: Further
* samples collected while the pen is down will reported as movement
* events.
*/
priv->sample.contact = CONTACT_MOVE;
}
priv->penchange = false;
ret = OK;
}
return ret;
}
/****************************************************************************
* Name: stmpe811_waitsample
*
* Description:
* Wait for a sample to become available (this is really part of the
* stmpe811_read logic).
*
****************************************************************************/
static inline int stmpe811_waitsample(FAR struct stmpe811_dev_s *priv,
FAR struct stmpe811_sample_s *sample)
{
int ret;
/* Disable pre-emption to prevent the worker thread from running
* asynchronously.
*/
sched_lock();
/* Now release the semaphore that manages mutually exclusive access to
* the device structure. This may cause other tasks to become ready to
* run, but they cannot run yet because pre-emption is disabled.
*/
sem_post(&priv->exclsem);
/* Try to get the a sample... if we cannot, then wait on the semaphore
* that is posted when new sample data is availble.
*/
while (stmpe811_sample(priv, sample) < 0)
{
/* Wait for a change in the STMPE811 state */
priv->nwaiters++;
ret = sem_wait(&priv->waitsem);
priv->nwaiters--;
/* When we are re-awakened, pre-emption will again be disabled */
if (ret < 0)
{
#ifdef CONFIG_DEBUG
// Sample the errno (debug output could change it)
int errval = errno;
/* If we are awakened by a signal, then we need to return
* the failure now.
*/
idbg("ERROR: sem_wait failed: %d\n", errval);
DEBUGASSERT(errval == EINTR);
#endif
ret = -EINTR;
goto errout;
}
}
/* Re-acquire the semaphore that manages mutually exclusive access to
* the device structure. We may have to wait here. But we have our sample.
* Interrupts and pre-emption will be re-enabled while we wait.
*/
ret = sem_wait(&priv->exclsem);
errout:
/* Restore pre-emption. We might get suspended here but that is okay
* because we already have our sample. Note: this means that if there
* were two threads reading from the STMPE811 for some reason, the data
* might be read out of order.
*/
sched_unlock();
return ret;
}
/****************************************************************************
* Name: stmpe811_open
*
* Description:
* Standard character driver open method.
*
****************************************************************************/
static int stmpe811_open(FAR struct file *filep)
{
#ifdef CONFIG_STMPE811_REFCNT
FAR struct inode *inode;
FAR struct stmpe811_dev_s *priv;
uint8_t tmp;
int ret;
DEBUGASSERT(filep);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = (FAR struct stmpe811_dev_s *)inode->i_private;
/* Get exclusive access to the driver data structure */
ret = sem_wait(&priv->exclsem);
if (ret < 0)
{
/* This should only happen if the wait was canceled by an signal */
DEBUGASSERT(errno == EINTR);
return -EINTR;
}
/* Increment the reference count */
tmp = priv->crefs + 1;
if (tmp == 0)
{
/* More than 255 opens; uint8_t overflows to zero */
ret = -EMFILE;
goto errout_with_sem;
}
/* When the reference increments to 1, this is the first open event
* on the driver.. and an opportunity to do any one-time initialization.
*/
/* Save the new open count on success */
priv->crefs = tmp;
errout_with_sem:
sem_post(&priv->exclsem);
return ret;
#else
return OK;
#endif
}
/****************************************************************************
* Name: stmpe811_close
*
* Description:
* Standard character driver close method.
*
****************************************************************************/
static int stmpe811_close(FAR struct file *filep)
{
#ifdef CONFIG_STMPE811_REFCNT
FAR struct inode *inode;
FAR struct stmpe811_dev_s *priv;
int ret;
DEBUGASSERT(filep);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = (FAR struct stmpe811_dev_s *)inode->i_private;
/* Get exclusive access to the driver data structure */
ret = sem_wait(&priv->exclsem);
if (ret < 0)
{
/* This should only happen if the wait was canceled by an signal */
DEBUGASSERT(errno == EINTR);
return -EINTR;
}
/* Decrement the reference count unless it would decrement a negative
* value. When the count decrements to zero, there are no further
* open references to the driver.
*/
if (priv->crefs >= 1)
{
priv->crefs--;
}
sem_post(&priv->exclsem);
#endif
return OK;
}
/****************************************************************************
* Name: stmpe811_read
*
* Description:
* Standard character driver read method.
*
****************************************************************************/
static ssize_t stmpe811_read(FAR struct file *filep, FAR char *buffer, size_t len)
{
FAR struct inode *inode;
FAR struct stmpe811_dev_s *priv;
FAR struct touch_sample_s *report;
struct stmpe811_sample_s sample;
int ret;
ivdbg("len=%d\n", len);
DEBUGASSERT(filep);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = (FAR struct stmpe811_dev_s *)inode->i_private;
/* Verify that the caller has provided a buffer large enough to receive
* the touch data.
*/
if (len < SIZEOF_TOUCH_SAMPLE_S(1))
{
/* We could provide logic to break up a touch report into segments and
* handle smaller reads... but why?
*/
return -ENOSYS;
}
/* Get exclusive access to the driver data structure */
ret = sem_wait(&priv->exclsem);
if (ret < 0)
{
/* This should only happen if the wait was canceled by an signal */
DEBUGASSERT(errno == EINTR);
return -EINTR;
}
/* Try to read sample data. */
ret = stmpe811_sample(priv, &sample);
if (ret < 0)
{
/* Sample data is not available now. We would ave to wait to get
* receive sample data. If the user has specified the O_NONBLOCK
* option, then just return an error.
*/
if (filep->f_oflags & O_NONBLOCK)
{
ret = -EAGAIN;
goto errout;
}
/* Wait for sample data */
ret = stmpe811_waitsample(priv, &sample);
if (ret < 0)
{
/* We might have been awakened by a signal */
goto errout;
}
}
/* In any event, we now have sampled STMPE811 data that we can report
* to the caller.
*/
report = (FAR struct touch_sample_s *)buffer;
memset(report, 0, SIZEOF_TOUCH_SAMPLE_S(1));
report->npoints = 1;
report->point[0].id = sample.id;
report->point[0].x = sample.x;
report->point[0].y = sample.y;
report->point[0].pressure = sample.z;
/* Report the appropriate flags */
if (sample.contact == CONTACT_UP)
{
/* Pen is now up. Is the positional data valid? This is important to
* know because the release will be sent to the window based on its
* last positional data.
*/
if (sample.valid)
{
report->point[0].flags = TOUCH_UP | TOUCH_ID_VALID |
TOUCH_POS_VALID | TOUCH_PRESSURE_VALID;
}
else
{
report->point[0].flags = TOUCH_UP | TOUCH_ID_VALID;
}
}
else if (sample.contact == CONTACT_DOWN)
{
/* First contact */
report->point[0].flags = TOUCH_DOWN | TOUCH_ID_VALID |
TOUCH_POS_VALID | TOUCH_PRESSURE_VALID;
}
else /* if (sample->contact == CONTACT_MOVE) */
{
/* Movement of the same contact */
report->point[0].flags = TOUCH_MOVE | TOUCH_ID_VALID |
TOUCH_POS_VALID | TOUCH_PRESSURE_VALID;
}
ret = SIZEOF_TOUCH_SAMPLE_S(1);
errout:
sem_post(&priv->exclsem);
return ret;
}
/****************************************************************************
* Name: stmpe811_ioctl
*
* Description:
* Standard character driver ioctl method.
*
****************************************************************************/
static int stmpe811_ioctl(FAR struct file *filep, int cmd, unsigned long arg)
{
FAR struct inode *inode;
FAR struct stmpe811_dev_s *priv;
int ret;
ivdbg("cmd: %d arg: %ld\n", cmd, arg);
DEBUGASSERT(filep);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = (FAR struct stmpe811_dev_s *)inode->i_private;
/* Get exclusive access to the driver data structure */
ret = sem_wait(&priv->exclsem);
if (ret < 0)
{
/* This should only happen if the wait was canceled by an signal */
DEBUGASSERT(errno == EINTR);
return -EINTR;
}
/* Process the IOCTL by command */
switch (cmd)
{
case TSIOC_SETFREQUENCY: /* arg: Pointer to uint32_t frequency value */
{
FAR uint32_t *ptr = (FAR uint32_t *)((uintptr_t)arg);
DEBUGASSERT(priv->config != NULL && ptr != NULL);
priv->config->frequency = I2C_SETFREQUENCY(priv->i2c, *ptr);
}
break;
case TSIOC_GETFREQUENCY: /* arg: Pointer to uint32_t frequency value */
{
FAR uint32_t *ptr = (FAR uint32_t *)((uintptr_t)arg);
DEBUGASSERT(priv->config != NULL && ptr != NULL);
*ptr = priv->config->frequency;
}
break;
default:
ret = -ENOTTY;
break;
}
sem_post(&priv->exclsem);
return ret;
}
/****************************************************************************
* Name: stmpe811_poll
*
* Description:
* Standard character driver poll method.
*
****************************************************************************/
#ifndef CONFIG_DISABLE_POLL
static int stmpe811_poll(FAR struct file *filep, FAR struct pollfd *fds,
bool setup)
{
FAR struct inode *inode;
FAR struct stmpe811_dev_s *priv;
int ret;
int i;
ivdbg("setup: %d\n", (int)setup);
DEBUGASSERT(filep && fds);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = (FAR struct stmpe811_dev_s *)inode->i_private;
/* Are we setting up the poll? Or tearing it down? */
ret = sem_wait(&priv->exclsem);
if (ret < 0)
{
/* This should only happen if the wait was canceled by an signal */
DEBUGASSERT(errno == EINTR);
return -EINTR;
}
if (setup)
{
/* Ignore waits that do not include POLLIN */
if ((fds->events & POLLIN) == 0)
{
idbg("ERROR: Missing POLLIN: revents: %08x\n", fds->revents);
ret = -EDEADLK;
goto errout;
}
/* This is a request to set up the poll. Find an available
* slot for the poll structure reference
*/
for (i = 0; i < CONFIG_STMPE811_NPOLLWAITERS; i++)
{
/* Find an available slot */
if (!priv->fds[i])
{
/* Bind the poll structure and this slot */
priv->fds[i] = fds;
fds->priv = &priv->fds[i];
break;
}
}
if (i >= CONFIG_STMPE811_NPOLLWAITERS)
{
idbg("ERROR: No availabled slot found: %d\n", i);
fds->priv = NULL;
ret = -EBUSY;
goto errout;
}
/* Should we immediately notify on any of the requested events? */
if (priv->penchange)
{
stmpe811_notify(priv);
}
}
else if (fds->priv)
{
/* This is a request to tear down the poll. */
struct pollfd **slot = (struct pollfd **)fds->priv;
DEBUGASSERT(slot != NULL);
/* Remove all memory of the poll setup */
*slot = NULL;
fds->priv = NULL;
}
errout:
sem_post(&priv->exclsem);
return ret;
}
#endif
/****************************************************************************
* Name: stmpe811_timeoutworker
*
* Description:
* A timer has expired without receiving a pen up event. Check again.
*
****************************************************************************/
static void stmpe811_timeoutworker(FAR void *arg)
{
FAR struct stmpe811_dev_s *priv = (FAR struct stmpe811_dev_s *)arg;
DEBUGASSERT(priv);
/* Treat the timeout just like an interrupt occurred */
stmpe811_tscworker(priv, stmpe811_getreg8(priv, STMPE811_INT_STA));
}
/****************************************************************************
* Name: stmpe811_timeout
*
* Description:
* A timer has expired without receiving a pen up event. Schedule work
* to check again.
*
****************************************************************************/
static void stmpe811_timeout(int argc, uint32_t arg1, ...)
{
FAR struct stmpe811_dev_s *priv = (FAR struct stmpe811_dev_s *)((uintptr_t)arg1);
int ret;
/* Are we still stuck in the pen down state? */
if (priv->sample.contact == CONTACT_DOWN ||
priv->sample.contact == CONTACT_MOVE)
{
/* Yes... is the worker thread available? If not, then apparently
* we have work already pending?
*/
if (work_available(&priv->timeout))
{
/* Yes.. Transfer processing to the worker thread. Since STMPE811
* interrupts are disabled while the work is pending, no special
* action should be required to protect the work queue.
*/
ret = work_queue(HPWORK, &priv->timeout, stmpe811_timeoutworker, priv, 0);
if (ret != 0)
{
illdbg("Failed to queue work: %d\n", ret);
}
}
}
}
/****************************************************************************
* Name: stmpe811_tscinitialize
*
* Description:
* Initialize the touchscreen controller. This is really a part of the
* stmpe811_register logic,
*
****************************************************************************/
static inline void stmpe811_tscinitialize(FAR struct stmpe811_dev_s *priv)
{
uint8_t regval;
ivdbg("Initializing touchscreen controller\n");
/* Enable TSC and ADC functions */
regval = stmpe811_getreg8(priv, STMPE811_SYS_CTRL2);
regval &= ~(SYS_CTRL2_TSC_OFF | SYS_CTRL2_ADC_OFF);
stmpe811_putreg8(priv, STMPE811_SYS_CTRL2, regval);
/* Enable the TSC global interrupts */
regval = stmpe811_getreg8(priv, STMPE811_INT_EN);
regval |= (uint32_t)(INT_TOUCH_DET | INT_FIFO_TH | INT_FIFO_OFLOW);
stmpe811_putreg8(priv, STMPE811_INT_EN, regval);
/* Select Sample Time, bit number and ADC Reference */
stmpe811_putreg8(priv, STMPE811_ADC_CTRL1, priv->config->ctrl1);
/* Wait for 20 ms */
up_mdelay(20);
/* Select the ADC clock speed */
stmpe811_putreg8(priv, STMPE811_ADC_CTRL2, priv->config->ctrl2);
/* Select TSC pins in non-GPIO mode (AF=0) */
regval = stmpe811_getreg8(priv, STMPE811_GPIO_AF);
regval &= ~(uint8_t)TSC_PIN_SET;
stmpe811_putreg8(priv, STMPE811_GPIO_AF, regval);
/* Select 2 nF filter capacitor */
stmpe811_putreg8(priv, STMPE811_TSC_CFG,
(TSC_CFG_AVE_CTRL_4SAMPLES | TSC_CFG_TOUCH_DELAY_500US | TSC_CFG_SETTLING_500US));
/* Select single point reading */
stmpe811_putreg8(priv, STMPE811_FIFO_TH, 1);
/* Reset and clear the FIFO. */
stmpe811_putreg8(priv, STMPE811_FIFO_STA, FIFO_STA_FIFO_RESET);
stmpe811_putreg8(priv, STMPE811_FIFO_STA, 0);
/* set the data format for Z value: 7 fractional part and 1 whole part */
stmpe811_putreg8(priv, STMPE811_TSC_FRACTIONZ, 0x01);
/* Set the driving capability of the device for TSC pins: 50mA */
stmpe811_putreg8(priv, STMPE811_TSC_IDRIVE, TSC_IDRIVE_50MA);
/* Enable the TSC. Use no tracking index, touch-screen controller
* operation mode (XYZ).
*/
stmpe811_putreg8(priv, STMPE811_TSC_CTRL, TSC_CTRL_EN);
/* Clear all the status pending bits */
stmpe811_putreg8(priv, STMPE811_INT_STA, INT_ALL);
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: stmpe811_register
*
* Description:
* Enable TSC functionality. GPIO4-7 must be available. This function
* will register the touchsceen driver as /dev/inputN where N is the minor
* device number
*
* Input Parameters:
* handle - The handle previously returned by stmpe811_register
* minor - The input device minor number
*
* Returned Value:
* Zero is returned on success. Otherwise, a negated errno value is
* returned to indicate the nature of the failure.
*
****************************************************************************/
int stmpe811_register(STMPE811_HANDLE handle, int minor)
{
FAR struct stmpe811_dev_s *priv = (FAR struct stmpe811_dev_s *)handle;
char devname[DEV_NAMELEN];
int ret;
ivdbg("handle=%p minor=%d\n", handle, minor);
DEBUGASSERT(priv);
/* Get exclusive access to the device structure */
ret = sem_wait(&priv->exclsem);
if (ret < 0)
{
int errval = errno;
idbg("ERROR: sem_wait failed: %d\n", errval);
return -errval;
}
/* Make sure that the pins (4-7) need by the TSC are not already in use */
if ((priv->inuse & TSC_PIN_SET) != 0)
{
idbg("ERROR: TSC pins is already in-use: %02x\n", priv->inuse);
sem_post(&priv->exclsem);
return -EBUSY;
}
/* Initialize the TS structure fields to their default values */
priv->minor = minor;
priv->penchange = false;
priv->threshx = 0;
priv->threshy = 0;
/* Create a timer for catching missed pen up conditions */
priv->wdog = wd_create();
if (!priv->wdog)
{
idbg("ERROR: Failed to create a watchdog\n", errno);
sem_post(&priv->exclsem);
return -ENOSPC;
}
/* Register the character driver */
snprintf(devname, DEV_NAMELEN, DEV_FORMAT, minor);
ret = register_driver(devname, &g_stmpe811fops, 0666, priv);
if (ret < 0)
{
idbg("ERROR: Failed to register driver %s: %d\n", devname, ret);
sem_post(&priv->exclsem);
return ret;
}
/* Initialize the touchscreen controller */
stmpe811_tscinitialize(priv);
/* Inidicate that the touchscreen controller was successfully initialized */
priv->inuse |= TSC_PIN_SET; /* Pins 4-7 are now in-use */
priv->flags |= STMPE811_FLAGS_TSC_INITIALIZED; /* TSC function is initialized */
sem_post(&priv->exclsem);
return ret;
}
/****************************************************************************
* Name: stmpe811_tscworker
*
* Description:
* This function is called to handle a TSC interrupt. It is not really
* an interrupt handle because it is called from the STMPE811 "bottom half"
* logic that runs on the worker thread.
*
****************************************************************************/
void stmpe811_tscworker(FAR struct stmpe811_dev_s *priv, uint8_t intsta)
{
FAR struct stmpe811_config_s *config; /* Convenience pointer */
bool pendown; /* true: pend is down */
uint16_t xdiff; /* X difference used in thresholding */
uint16_t ydiff; /* Y difference used in thresholding */
uint16_t x; /* X position */
uint16_t y; /* Y position */
ASSERT(priv != NULL);
/* Cancel the missing pen up timer */
(void)wd_cancel(priv->wdog);
/* Get a pointer the callbacks for convenience (and so the code is not so
* ugly).
*/
config = priv->config;
DEBUGASSERT(config != NULL);
/* Check for pen up or down from the TSC_STA ibit n the STMPE811_TSC_CTRL register. */
pendown = (stmpe811_getreg8(priv, STMPE811_TSC_CTRL) & TSC_CTRL_TSC_STA) != 0;
/* Handle the change from pen down to pen up */
if (!pendown)
{
/* The pen is up.. reset thresholding variables. FIFOs will read zero if
* there is no data available (hence the choice of (0,0))
*/
priv->threshx = 0;
priv->threshy = 0;
/* Ignore the interrupt if the pen was already up (CONTACT_NONE == pen up and
* already reported; CONTACT_UP == pen up, but not reported)
*/
if (priv->sample.contact == CONTACT_NONE ||
priv->sample.contact == CONTACT_UP)
{
goto ignored;
}
/* A pen-down to up transition has been detected. CONTACT_UP indicates the
* initial loss of contzt. The state will be changed to CONTACT_NONE
* after the loss of contact is sampled.
*/
priv->sample.contact = CONTACT_UP;
}
/* The pen is down... check for data in the FIFO */
else if ((intsta & (INT_FIFO_TH|INT_FIFO_OFLOW)) != 0)
{
/* Read the next x and y positions from the FIFO. */
#ifdef CONFIG_STMPE811_SWAPXY
x = stmpe811_getreg16(priv, STMPE811_TSC_DATAX);
y = stmpe811_getreg16(priv, STMPE811_TSC_DATAY);
#else
x = stmpe811_getreg16(priv, STMPE811_TSC_DATAY);
y = stmpe811_getreg16(priv, STMPE811_TSC_DATAX);
#endif
/* If we have not yet processed the last pen up event, then we
* cannot handle this pen down event. We will have to discard it. That
* should be okay because there will be another FIFO event right behind
* this one. Other kinds of data overruns are not harmful.
*
* Hmm.. a better design might be to disable FIFO interrupts when we
* detect pen up. Then re-enable them when CONTACT_UP is reported.
* That would save processing interrupts just to discard the data.
*/
if (priv->sample.contact == CONTACT_UP)
{
/* We have not closed the loop on the last touch ... don't report
* anything.
*/
goto ignored;
}
/* Perform a thresholding operation so that the results will be more stable.
* If the difference from the last sample is small, then ignore the event.
* REVISIT: Should a large change in pressure also generate a event?
*/
xdiff = x > priv->threshx ? (x - priv->threshx) : (priv->threshx - x);
ydiff = y > priv->threshy ? (y - priv->threshy) : (priv->threshy - y);
if (xdiff < CONFIG_STMPE811_THRESHX && ydiff < CONFIG_STMPE811_THRESHY)
{
/* Little or no change in either direction ... don't report anything. */
goto ignored;
}
/* When we see a big difference, snap to the new x/y thresholds */
priv->threshx = x;
priv->threshy = y;
/* Update the x/y position in the sample data */
priv->sample.x = priv->threshx;
priv->sample.y = priv->threshy;
/* Update the Z pressure index */
priv->sample.z = stmpe811_getreg8(priv, STMPE811_TSC_DATAZ);
priv->sample.valid = true;
/* If this is the first (acknowledged) pen down report, then report
* this as the first contact. If contact == CONTACT_DOWN, it will be
* set to set to CONTACT_MOVE after the contact is first sampled.
*/
if (priv->sample.contact != CONTACT_MOVE)
{
/* First contact */
priv->sample.contact = CONTACT_DOWN;
}
}
/* Pen down, but no data in FIFO */
else
{
/* Ignore the interrupt... wait until there is data in the FIFO */
goto ignored;
}
/* We get here if (1) we just went from a pen down to a pen up state OR (2)
* We just get a measurement from the FIFO in a pen down state. Indicate
* the availability of new sample data for this ID.
*/
priv->sample.id = priv->id;
priv->penchange = true;
/* Notify any waiters that new STMPE811 data is available */
stmpe811_notify(priv);
/* If we think that the pend is still down, the start/re-start the pen up
* timer.
*/
ignored:
if (priv->sample.contact == CONTACT_DOWN ||
priv->sample.contact == CONTACT_MOVE)
{
(void)wd_start(priv->wdog, STMPE811_PENUP_TICKS, stmpe811_timeout,
1, (uint32_t)((uintptr_t)priv));
}
/* Reset and clear all data in the FIFO */
stmpe811_putreg8(priv, STMPE811_FIFO_STA, FIFO_STA_FIFO_RESET);
stmpe811_putreg8(priv, STMPE811_FIFO_STA, 0);
}
#endif /* CONFIG_INPUT && CONFIG_INPUT_STMPE811 && !CONFIG_STMPE811_TSC_DISABLE */