| /**************************************************************************** |
| * tools/mkconfig.c |
| * |
| * Copyright (C) 2007-2011 Gregory Nutt. All rights reserved. |
| * Author: Gregory Nutt <spudmonkey@racsa.co.cr> |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * 3. Neither the name NuttX nor the names of its contributors may be |
| * used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
| * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
| * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
| * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED |
| * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN |
| * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| * |
| ****************************************************************************/ |
| |
| /**************************************************************************** |
| * Included Files |
| ****************************************************************************/ |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <limits.h> |
| #include <ctype.h> |
| #include <unistd.h> |
| #include <errno.h> |
| |
| /**************************************************************************** |
| * Definitions |
| ****************************************************************************/ |
| |
| #define DEFCONFIG ".config" |
| #define LINESIZE ( PATH_MAX > 256 ? PATH_MAX : 256 ) |
| |
| /**************************************************************************** |
| * Private Functions |
| ****************************************************************************/ |
| |
| static char line[LINESIZE+1]; |
| |
| static char *skip_space(char *ptr) |
| { |
| while (*ptr && isspace(*ptr)) ptr++; |
| return ptr; |
| } |
| |
| static char *find_name_end(char *ptr) |
| { |
| while (*ptr && (isalnum(*ptr) || *ptr == '_')) ptr++; |
| return ptr; |
| } |
| |
| static char *find_value_end(char *ptr) |
| { |
| while (*ptr && !isspace(*ptr)) |
| { |
| if (*ptr == '"') |
| { |
| do ptr++; while (*ptr && *ptr != '"'); |
| if (*ptr) ptr++; |
| } |
| else |
| { |
| do ptr++; while (*ptr && !isspace(*ptr) && *ptr != '"'); |
| } |
| } |
| return ptr; |
| } |
| |
| static char *read_line(FILE *stream) |
| { |
| char *ptr; |
| |
| for (;;) |
| { |
| line[LINESIZE] = '\0'; |
| if (!fgets(line, LINESIZE, stream)) |
| { |
| return NULL; |
| } |
| else |
| { |
| ptr = skip_space(line); |
| if (*ptr && *ptr != '#' && *ptr != '\n') |
| { |
| return ptr; |
| } |
| } |
| } |
| } |
| |
| static void parse_line(char *ptr, char **varname, char **varval) |
| { |
| *varname = ptr; |
| *varval = NULL; |
| |
| ptr = find_name_end(ptr); |
| if (*ptr && *ptr != '=') |
| { |
| *ptr = '\0'; |
| ptr = skip_space(ptr + 1); |
| } |
| |
| if (*ptr == '=') |
| { |
| *ptr = '\0'; |
| ptr = skip_space(ptr + 1); |
| if (*ptr) |
| { |
| *varval = ptr; |
| ptr = find_value_end(ptr); |
| *ptr = '\0'; |
| } |
| } |
| } |
| |
| static void parse_file(FILE *stream) |
| { |
| char *varname; |
| char *varval; |
| char *ptr; |
| |
| do |
| { |
| ptr = read_line(stream); |
| if (ptr) |
| { |
| parse_line(ptr, &varname, &varval); |
| if (varname) |
| { |
| if (!varval || strcmp(varval, "n") == 0) |
| { |
| printf("#undef %s\n", varname); |
| } |
| else if (strcmp(varval, "y") == 0) |
| { |
| printf("#define %s 1\n", varname); |
| } |
| else |
| { |
| printf("#define %s %s\n", varname, varval); |
| } |
| } |
| } |
| } |
| while (ptr); |
| } |
| |
| static inline char *getfilepath(const char *name) |
| { |
| snprintf(line, PATH_MAX, "%s/" DEFCONFIG, name); |
| line[PATH_MAX] = '\0'; |
| return strdup(line); |
| } |
| |
| static void show_usage(const char *progname) |
| { |
| fprintf(stderr, "USAGE: %s <abs path to .config>\n", progname); |
| exit(1); |
| } |
| |
| /**************************************************************************** |
| * Public Functions |
| ****************************************************************************/ |
| |
| int main(int argc, char **argv, char **envp) |
| { |
| char *filepath; |
| FILE *stream; |
| |
| if (argc != 2) |
| { |
| fprintf(stderr, "Unexpected number of arguments\n"); |
| show_usage(argv[0]); |
| } |
| |
| filepath = getfilepath(argv[1]); |
| if (!filepath) |
| { |
| fprintf(stderr, "getfilepath failed\n"); |
| exit(2); |
| } |
| |
| stream= fopen(filepath, "r"); |
| if (!stream) |
| { |
| fprintf(stderr, "open %s failed: %s\n", filepath, strerror(errno)); |
| exit(3); |
| } |
| |
| printf("/* config.h -- Autogenerated! Do not edit. */\n\n"); |
| printf("#ifndef __ARCH_CONFIG_H\n"); |
| printf("#define __ARCH_CONFIG_H\n\n"); |
| printf("/* Architecture-specific options *************************/\n\n"); |
| parse_file(stream); |
| printf("\n/* Sanity Checks *****************************************/\n\n"); |
| printf("/* If this is an NXFLAT, external build, then make sure that\n"); |
| printf(" * NXFLAT support is enabled in the base code.\n"); |
| printf(" */\n\n"); |
| printf("#if defined(__NXFLAT__) && !defined(CONFIG_NXFLAT)\n"); |
| printf("# error \"NXFLAT support not enabled in this configuration\"\n"); |
| printf("#endif\n\n"); |
| printf("/* NXFLAT requires PIC support in the TCBs. */\n\n"); |
| printf("#if defined(CONFIG_NXFLAT)\n"); |
| printf("# undef CONFIG_PIC\n"); |
| printf("# define CONFIG_PIC 1\n"); |
| printf("#endif\n\n"); |
| printf("/* Binary format support is disabled if no binary formats are\n"); |
| printf(" * configured (at present, NXFLAT is the only supported binary.\n"); |
| printf(" * format).\n"); |
| printf(" */\n\n"); |
| printf("#if !defined(CONFIG_NXFLAT)\n"); |
| printf("# undef CONFIG_BINFMT_DISABLE\n"); |
| printf("# define CONFIG_BINFMT_DISABLE 1\n"); |
| printf("#endif\n\n"); |
| printf("/* The correct way to disable RR scheduling is to set the\n"); |
| printf(" * timeslice to zero.\n"); |
| printf(" */\n\n"); |
| printf("#ifndef CONFIG_RR_INTERVAL\n"); |
| printf("# define CONFIG_RR_INTERVAL 0\n"); |
| printf("#endif\n\n"); |
| printf("/* The correct way to disable filesystem supuport is to set the\n"); |
| printf(" * number of file descriptors to zero.\n"); |
| printf(" */\n\n"); |
| printf("#ifndef CONFIG_NFILE_DESCRIPTORS\n"); |
| printf("# define CONFIG_NFILE_DESCRIPTORS 0\n"); |
| printf("#endif\n\n"); |
| printf("/* If a console is selected, then make sure that there are\n"); |
| printf(" * resources for 3 file descriptors and, if any streams are\n"); |
| printf(" * selected, also for 3 file streams.\n"); |
| printf(" */\n\n"); |
| printf("#ifdef CONFIG_DEV_CONSOLE\n"); |
| printf("# if CONFIG_NFILE_DESCRIPTORS < 3\n"); |
| printf("# undef CONFIG_NFILE_DESCRIPTORS\n"); |
| printf("# define CONFIG_NFILE_DESCRIPTORS 3\n"); |
| printf("# endif\n\n"); |
| printf("# if CONFIG_NFILE_STREAMS > 0 && CONFIG_NFILE_STREAMS < 3\n"); |
| printf("# undef CONFIG_NFILE_STREAMS\n"); |
| printf("# define CONFIG_NFILE_STREAMS 3\n"); |
| printf("# endif\n"); |
| printf("#endif\n\n"); |
| printf("/* If priority inheritance is disabled, then do not allocate any\n"); |
| printf(" * associated resources.\n"); |
| printf(" */\n\n"); |
| printf("#if !defined(CONFIG_PRIORITY_INHERITANCE) || !defined(CONFIG_SEM_PREALLOCHOLDERS)\n"); |
| printf("# undef CONFIG_SEM_PREALLOCHOLDERS\n"); |
| printf("# define CONFIG_SEM_PREALLOCHOLDERS 0\n"); |
| printf("#endif\n\n"); |
| printf("#if !defined(CONFIG_PRIORITY_INHERITANCE) || !defined(CONFIG_SEM_NNESTPRIO)\n"); |
| printf("# undef CONFIG_SEM_NNESTPRIO\n"); |
| printf("# define CONFIG_SEM_NNESTPRIO 0\n"); |
| printf("#endif\n\n"); |
| printf("/* If no file descriptors are configured, then make certain no\n"); |
| printf(" * streams are configured either.\n"); |
| printf(" */\n\n"); |
| printf("#if CONFIG_NFILE_DESCRIPTORS == 0\n"); |
| printf("# undef CONFIG_NFILE_STREAMS\n"); |
| printf("# define CONFIG_NFILE_STREAMS 0\n"); |
| printf("#endif\n\n"); |
| printf("/* There must be at least one memory region. */\n\n"); |
| printf("#ifndef CONFIG_MM_REGIONS\n"); |
| printf("# define CONFIG_MM_REGIONS 1\n"); |
| printf("#endif\n\n"); |
| printf("/* If no file streams are configured, then make certain that buffered I/O\n"); |
| printf(" * support is disabled\n"); |
| printf(" */\n\n"); |
| printf("#if CONFIG_NFILE_STREAMS == 0\n"); |
| printf("# undef CONFIG_STDIO_BUFFER_SIZE\n"); |
| printf("# define CONFIG_STDIO_BUFFER_SIZE 0\n"); |
| printf("#endif\n\n"); |
| printf("/* We are building a kernel version of the C library, then some user-space features\n"); |
| printf(" * need to be disabled\n"); |
| printf(" */\n\n"); |
| printf("#if defined(CONFIG_NUTTX_KERNEL) && defined(__KERNEL__)\n"); |
| printf("# undef CONFIG_STDIO_BUFFER_SIZE\n"); |
| printf("# define CONFIG_STDIO_BUFFER_SIZE 0\n"); |
| printf("# undef CONFIG_NUNGET_CHARS\n"); |
| printf("# define CONFIG_NUNGET_CHARS 0\n"); |
| printf("#endif\n\n"); |
| printf("/* If the maximum message size is zero, then we assume that message queues\n"); |
| printf(" * support should be disabled\n"); |
| printf(" */\n\n"); |
| printf("#if CONFIG_MQ_MAXMSGSIZE <= 0 && !defined(CONFIG_DISABLE_MQUEUE)\n"); |
| printf("# define CONFIG_DISABLE_MQUEUE 1\n"); |
| printf("#endif\n\n"); |
| printf("/* If mountpoint support in not included, then no filesystem can be supported */\n\n"); |
| printf("#ifdef CONFIG_DISABLE_MOUNTPOINT\n"); |
| printf("# undef CONFIG_FS_FAT\n"); |
| printf("# undef CONFIG_FS_ROMFS\n"); |
| printf("#endif\n\n"); |
| printf("/* Check if any readable and writable filesystem (OR USB storage) is supported */\n\n"); |
| printf("#undef CONFIG_FS_READABLE\n"); |
| printf("#undef CONFIG_FS_WRITABLE\n"); |
| printf("#if defined(CONFIG_FS_FAT) || defined(CONFIG_FS_ROMFS) || defined(CONFIG_USBSTRG)\n"); |
| printf("# define CONFIG_FS_READABLE 1\n"); |
| printf("#endif\n\n"); |
| printf("#if defined(CONFIG_FS_FAT) || defined(CONFIG_USBSTRG)\n"); |
| printf("# define CONFIG_FS_WRITABLE 1\n"); |
| printf("#endif\n\n"); |
| printf("/* There can be no network support with no socket descriptors */\n\n"); |
| printf("#if CONFIG_NSOCKET_DESCRIPTORS <= 0\n"); |
| printf("# undef CONFIG_NET\n"); |
| printf("#endif\n\n"); |
| printf("/* Conversely, if there is no network support, there is no need for\n"); |
| printf(" * socket descriptors\n"); |
| printf(" */\n\n"); |
| printf("#ifndef CONFIG_NET\n"); |
| printf("# undef CONFIG_NSOCKET_DESCRIPTORS\n"); |
| printf("# define CONFIG_NSOCKET_DESCRIPTORS 0\n"); |
| printf("#endif\n\n"); |
| printf("/* Protocol support can only be provided on top of basic network support */\n\n"); |
| printf("#ifndef CONFIG_NET\n"); |
| printf("# undef CONFIG_NET_TCP\n"); |
| printf("# undef CONFIG_NET_UDP\n"); |
| printf("# undef CONFIG_NET_ICMP\n"); |
| printf("#endif\n\n"); |
| printf("/* Verbose debug and sub-system debug only make sense if debug is enabled */\n\n"); |
| printf("#ifndef CONFIG_DEBUG\n"); |
| printf("# undef CONFIG_DEBUG_VERBOSE\n"); |
| printf("# undef CONFIG_DEBUG_SCHED\n"); |
| printf("# undef CONFIG_DEBUG_MM\n"); |
| printf("# undef CONFIG_DEBUG_PAGING\n"); |
| printf("# undef CONFIG_DEBUG_DMA\n"); |
| printf("# undef CONFIG_DEBUG_FS\n"); |
| printf("# undef CONFIG_DEBUG_LIB\n"); |
| printf("# undef CONFIG_DEBUG_BINFMT\n"); |
| printf("# undef CONFIG_DEBUG_NET\n"); |
| printf("# undef CONFIG_DEBUG_USB\n"); |
| printf("# undef CONFIG_DEBUG_GRAPHICS\n"); |
| printf("# undef CONFIG_DEBUG_GPIO\n"); |
| printf("#endif\n\n"); |
| printf("#endif /* __ARCH_CONFIG_H */\n"); |
| fclose(stream); |
| return 0; |
| } |