| /**************************************************************************** |
| * arch/arm/src/stm32l4/stm32l4_exti_gpio.c |
| * |
| * Licensed to the Apache Software Foundation (ASF) under one or more |
| * contributor license agreements. See the NOTICE file distributed with |
| * this work for additional information regarding copyright ownership. The |
| * ASF licenses this file to you under the Apache License, Version 2.0 (the |
| * "License"); you may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the |
| * License for the specific language governing permissions and limitations |
| * under the License. |
| * |
| ****************************************************************************/ |
| |
| /**************************************************************************** |
| * Included Files |
| ****************************************************************************/ |
| |
| #include <nuttx/config.h> |
| #include <nuttx/irq.h> |
| #include <nuttx/arch.h> |
| |
| #include <stdint.h> |
| #include <stdbool.h> |
| #include <errno.h> |
| #include <debug.h> |
| |
| #include <arch/irq.h> |
| |
| #include "arm_internal.h" |
| #include "chip.h" |
| #include "stm32l4_gpio.h" |
| #include "stm32l4_exti.h" |
| |
| /**************************************************************************** |
| * Private Types |
| ****************************************************************************/ |
| |
| struct gpio_callback_s |
| { |
| xcpt_t callback; /* Callback entry point */ |
| void *arg; /* The argument that accompanies the callback */ |
| }; |
| |
| /**************************************************************************** |
| * Private Data |
| ****************************************************************************/ |
| |
| /* Interrupt handlers attached to each EXTI */ |
| |
| static struct gpio_callback_s g_gpio_handlers[16]; |
| |
| /**************************************************************************** |
| * Private Functions |
| ****************************************************************************/ |
| |
| /**************************************************************************** |
| * Interrupt Service Routines - Dispatchers |
| ****************************************************************************/ |
| |
| static int stm32l4_exti0_isr(int irq, void *context, void *arg) |
| { |
| int ret = OK; |
| |
| /* Clear the pending interrupt */ |
| |
| putreg32(0x0001, STM32L4_EXTI1_PR); |
| |
| /* And dispatch the interrupt to the handler */ |
| |
| if (g_gpio_handlers[0].callback != NULL) |
| { |
| xcpt_t callback = g_gpio_handlers[0].callback; |
| void *cbarg = g_gpio_handlers[0].arg; |
| |
| ret = callback(irq, context, cbarg); |
| } |
| |
| return ret; |
| } |
| |
| static int stm32l4_exti1_isr(int irq, void *context, void *arg) |
| { |
| int ret = OK; |
| |
| /* Clear the pending interrupt */ |
| |
| putreg32(0x0002, STM32L4_EXTI1_PR); |
| |
| /* And dispatch the interrupt to the handler */ |
| |
| if (g_gpio_handlers[1].callback != NULL) |
| { |
| xcpt_t callback = g_gpio_handlers[1].callback; |
| void *cbarg = g_gpio_handlers[1].arg; |
| |
| ret = callback(irq, context, cbarg); |
| } |
| |
| return ret; |
| } |
| |
| static int stm32l4_exti2_isr(int irq, void *context, void *arg) |
| { |
| int ret = OK; |
| |
| /* Clear the pending interrupt */ |
| |
| putreg32(0x0004, STM32L4_EXTI1_PR); |
| |
| /* And dispatch the interrupt to the handler */ |
| |
| if (g_gpio_handlers[2].callback != NULL) |
| { |
| xcpt_t callback = g_gpio_handlers[2].callback; |
| void *cbarg = g_gpio_handlers[2].arg; |
| |
| ret = callback(irq, context, cbarg); |
| } |
| |
| return ret; |
| } |
| |
| static int stm32l4_exti3_isr(int irq, void *context, void *arg) |
| { |
| int ret = OK; |
| |
| /* Clear the pending interrupt */ |
| |
| putreg32(0x0008, STM32L4_EXTI1_PR); |
| |
| /* And dispatch the interrupt to the handler */ |
| |
| if (g_gpio_handlers[3].callback != NULL) |
| { |
| xcpt_t callback = g_gpio_handlers[3].callback; |
| void *cbarg = g_gpio_handlers[3].arg; |
| |
| ret = callback(irq, context, cbarg); |
| } |
| |
| return ret; |
| } |
| |
| static int stm32l4_exti4_isr(int irq, void *context, void *arg) |
| { |
| int ret = OK; |
| |
| /* Clear the pending interrupt */ |
| |
| putreg32(0x0010, STM32L4_EXTI1_PR); |
| |
| /* And dispatch the interrupt to the handler */ |
| |
| if (g_gpio_handlers[4].callback != NULL) |
| { |
| xcpt_t callback = g_gpio_handlers[4].callback; |
| void *cbarg = g_gpio_handlers[4].arg; |
| |
| ret = callback(irq, context, cbarg); |
| } |
| |
| return ret; |
| } |
| |
| static int stm32l4_exti_multiisr(int irq, void *context, void *arg, |
| int first, int last) |
| { |
| uint32_t pr; |
| int pin; |
| int ret = OK; |
| |
| /* Examine the state of each pin in the group */ |
| |
| pr = getreg32(STM32L4_EXTI1_PR); |
| |
| /* And dispatch the interrupt to the handler */ |
| |
| for (pin = first; pin <= last; pin++) |
| { |
| /* Is an interrupt pending on this pin? */ |
| |
| uint32_t mask = (1 << pin); |
| if ((pr & mask) != 0) |
| { |
| /* Clear the pending interrupt */ |
| |
| putreg32(mask, STM32L4_EXTI1_PR); |
| |
| /* And dispatch the interrupt to the handler */ |
| |
| if (g_gpio_handlers[pin].callback != NULL) |
| { |
| xcpt_t callback = g_gpio_handlers[pin].callback; |
| void *cbarg = g_gpio_handlers[pin].arg; |
| int tmp; |
| |
| tmp = callback(irq, context, cbarg); |
| if (tmp < 0) |
| { |
| ret = tmp; |
| } |
| } |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int stm32l4_exti95_isr(int irq, void *context, void *arg) |
| { |
| return stm32l4_exti_multiisr(irq, context, arg, 5, 9); |
| } |
| |
| static int stm32l4_exti1510_isr(int irq, void *context, void *arg) |
| { |
| return stm32l4_exti_multiisr(irq, context, arg, 10, 15); |
| } |
| |
| /**************************************************************************** |
| * Public Functions |
| ****************************************************************************/ |
| |
| /**************************************************************************** |
| * Name: stm32l4_gpiosetevent |
| * |
| * Description: |
| * Sets/clears GPIO based event and interrupt triggers. |
| * |
| * Description: |
| * Sets/clears GPIO based event and interrupt triggers. |
| * |
| * Input Parameters: |
| * pinset - GPIO pin configuration |
| * risingedge - Enables interrupt on rising edges |
| * fallingedge - Enables interrupt on falling edges |
| * event - Generate event when set |
| * func - When non-NULL, generate interrupt |
| * arg - Argument passed to the interrupt callback |
| * |
| * Returned Value: |
| * Zero (OK) is returned on success, otherwise a negated errno value is |
| * returned to indicate the nature of the failure. |
| * |
| ****************************************************************************/ |
| |
| int stm32l4_gpiosetevent(uint32_t pinset, bool risingedge, bool fallingedge, |
| bool event, xcpt_t func, void *arg) |
| { |
| struct gpio_callback_s *shared_cbs; |
| uint32_t pin = pinset & GPIO_PIN_MASK; |
| uint32_t exti = STM32L4_EXTI1_BIT(pin); |
| int irq; |
| xcpt_t handler; |
| int nshared; |
| int i; |
| |
| /* Select the interrupt handler for this EXTI pin */ |
| |
| if (pin < 5) |
| { |
| irq = pin + STM32L4_IRQ_EXTI0; |
| nshared = 1; |
| shared_cbs = &g_gpio_handlers[pin]; |
| switch (pin) |
| { |
| case 0: |
| handler = stm32l4_exti0_isr; |
| break; |
| |
| case 1: |
| handler = stm32l4_exti1_isr; |
| break; |
| |
| case 2: |
| handler = stm32l4_exti2_isr; |
| break; |
| |
| case 3: |
| handler = stm32l4_exti3_isr; |
| break; |
| |
| default: |
| handler = stm32l4_exti4_isr; |
| break; |
| } |
| } |
| else if (pin < 10) |
| { |
| irq = STM32L4_IRQ_EXTI95; |
| handler = stm32l4_exti95_isr; |
| shared_cbs = &g_gpio_handlers[5]; |
| nshared = 5; |
| } |
| else |
| { |
| irq = STM32L4_IRQ_EXTI1510; |
| handler = stm32l4_exti1510_isr; |
| shared_cbs = &g_gpio_handlers[10]; |
| nshared = 6; |
| } |
| |
| /* Get the previous GPIO IRQ handler; Save the new IRQ handler. */ |
| |
| g_gpio_handlers[pin].callback = func; |
| g_gpio_handlers[pin].arg = arg; |
| |
| /* Install external interrupt handlers */ |
| |
| if (func) |
| { |
| irq_attach(irq, handler, NULL); |
| up_enable_irq(irq); |
| } |
| else |
| { |
| /* Only disable IRQ if shared handler does not have any active |
| * callbacks. |
| */ |
| |
| for (i = 0; i < nshared; i++) |
| { |
| if (shared_cbs[i].callback != NULL) |
| { |
| break; |
| } |
| } |
| |
| if (i == nshared) |
| { |
| up_disable_irq(irq); |
| } |
| } |
| |
| /* Configure GPIO, enable EXTI line enabled if event or interrupt is |
| * enabled. |
| */ |
| |
| if (event || func) |
| { |
| pinset |= GPIO_EXTI; |
| } |
| |
| stm32l4_configgpio(pinset); |
| |
| /* Configure rising/falling edges */ |
| |
| modifyreg32(STM32L4_EXTI1_RTSR, |
| risingedge ? 0 : exti, |
| risingedge ? exti : 0); |
| modifyreg32(STM32L4_EXTI1_FTSR, |
| fallingedge ? 0 : exti, |
| fallingedge ? exti : 0); |
| |
| /* Enable Events and Interrupts */ |
| |
| modifyreg32(STM32L4_EXTI1_EMR, |
| event ? 0 : exti, |
| event ? exti : 0); |
| modifyreg32(STM32L4_EXTI1_IMR, |
| func ? 0 : exti, |
| func ? exti : 0); |
| |
| /* Return the old IRQ handler */ |
| |
| return OK; |
| } |