| # Licensed to the Apache Software Foundation (ASF) under one or more |
| # contributor license agreements. See the NOTICE file distributed with |
| # this work for additional information regarding copyright ownership. The |
| # ASF licenses this file to you under the Apache License, Version 2.0 (the |
| # "License"); you may not use this file except in compliance with the |
| # License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the |
| # License for the specific language governing permissions and limitations |
| # under the License. |
| |
| FROM ubuntu:20.04 AS builder-base |
| # NOTE WE ARE NOT REMOVEING APT CACHE. |
| # This should only be used for temp build images that artifacts will be copied from |
| RUN apt-get update -qq && apt-get install -y -qq \ |
| curl \ |
| xz-utils |
| |
| ############################################################################### |
| # Base image that should be used to prepare tools from nuttx-tools |
| ############################################################################### |
| FROM builder-base AS nuttx-tools |
| |
| RUN apt-get update -qq && DEBIAN_FRONTEND="noninteractive" apt-get install -y -qq \ |
| flex \ |
| bison \ |
| gperf \ |
| libncurses5-dev \ |
| make \ |
| cmake \ |
| g++ \ |
| gawk \ |
| git |
| |
| RUN mkdir /tools |
| WORKDIR /tools |
| |
| RUN mkdir -p /tools/nuttx-tools |
| RUN curl -s -L https://bitbucket.org/nuttx/tools/get/9ad3e1ee75c7.tar.gz \ |
| | tar -C nuttx-tools --strip-components=1 -xz |
| |
| RUN cd nuttx-tools/kconfig-frontends \ |
| && ./configure --enable-mconf --disable-gconf --disable-qconf --enable-static --prefix=/tools/kconfig-frontends \ |
| && make install |
| |
| RUN cd nuttx-tools \ |
| && mkdir genromfs \ |
| && tar -C genromfs --strip-components=1 -xf genromfs-0.5.2.tar.gz \ |
| && cd genromfs \ |
| && make install PREFIX=/tools/genromfs |
| |
| RUN mkdir bloaty -p \ |
| && git clone --depth 1 --branch v1.1 https://github.com/google/bloaty bloaty \ |
| && cd bloaty \ |
| && cmake -DCMAKE_SYSTEM_PREFIX_PATH=/tools/bloaty \ |
| && make install |
| |
| CMD [ "/bin/bash" ] |
| |
| ############################################################################### |
| # Base image that should be used to prepare arch build images |
| ############################################################################### |
| FROM builder-base AS nuttx-toolchain-base |
| |
| RUN mkdir /tools |
| WORKDIR /tools |
| |
| ############################################################################### |
| # Build image for tool required by ARM builds |
| ############################################################################### |
| FROM nuttx-toolchain-base AS nuttx-toolchain-arm |
| # Download the latest ARM GCC toolchain prebuilt by ARM |
| RUN mkdir gcc-arm-none-eabi && \ |
| curl -s -L "https://developer.arm.com/-/media/Files/downloads/gnu-rm/9-2019q4/gcc-arm-none-eabi-9-2019-q4-major-x86_64-linux.tar.bz2?revision=108bd959-44bd-4619-9c19-26187abf5225&la=en&hash=E788CE92E5DFD64B2A8C246BBA91A249CB8E2D2D" \ |
| | tar -C gcc-arm-none-eabi --strip-components 1 -xj |
| |
| ############################################################################### |
| # Build image for tool required by Pinguino builds |
| ############################################################################### |
| FROM nuttx-toolchain-base AS nuttx-toolchain-pinguino |
| # Download the pinguino compilers. Note this includes both 8bit and 32bit |
| # toolchains and builds for multiple host systems. Only copy what is needed. |
| RUN mkdir pinguino-compilers && \ |
| curl -s -L "https://github.com/PinguinoIDE/pinguino-compilers/archive/62db5158d7f6d41c6fadb05de81cc31dd81a1958.tar.gz" \ |
| | tar -C pinguino-compilers --strip-components=2 --wildcards -xz */linux64 |
| |
| ############################################################################### |
| # Build image for tool required by RISCV builds |
| ############################################################################### |
| FROM nuttx-toolchain-base AS nuttx-toolchain-riscv |
| # Download the latest RISCV GCC toolchain prebuilt by SiFive |
| RUN mkdir riscv64-unknown-elf-gcc && \ |
| curl -s -L "https://static.dev.sifive.com/dev-tools/riscv64-unknown-elf-gcc-8.3.0-2019.08.0-x86_64-linux-ubuntu14.tar.gz" \ |
| | tar -C riscv64-unknown-elf-gcc --strip-components 1 -xz |
| |
| ############################################################################### |
| # Build image for tool required by ESP32 builds |
| ############################################################################### |
| FROM nuttx-toolchain-base AS nuttx-toolchain-esp32 |
| # Download the latest ESP32 GCC toolchain prebuilt by Espressif |
| RUN mkdir -p xtensa-esp32-elf-gcc && \ |
| curl -s -L "https://github.com/espressif/crosstool-NG/releases/download/esp-2020r3/xtensa-esp32-elf-gcc8_4_0-esp-2020r3-linux-amd64.tar.gz" \ |
| | tar -C xtensa-esp32-elf-gcc --strip-components 1 -xz |
| |
| RUN echo "ESP Binaries: 2021/02/20" |
| RUN mkdir -p /tools/blobs && cd /tools/blobs \ |
| && curl -s -L "https://github.com/espressif/esp-nuttx-bootloader/releases/download/latest/bootloader-esp32.bin" -o bootloader-esp32.bin \ |
| && curl -s -L "https://github.com/espressif/esp-nuttx-bootloader/releases/download/latest/bootloader-esp32c3.bin" -o bootloader-esp32c3.bin \ |
| && curl -s -L "https://github.com/espressif/esp-nuttx-bootloader/releases/download/latest/partition-table-esp32.bin" -o partition-table-esp32.bin \ |
| && curl -s -L "https://github.com/espressif/esp-nuttx-bootloader/releases/download/latest/partition-table-esp32c3.bin" -o partition-table-esp32c3.bin |
| |
| ############################################################################### |
| # Build image for tool required by Renesas builds |
| ############################################################################### |
| FROM nuttx-toolchain-base AS nuttx-toolchain-renesas |
| # Build Renesas RX GCC toolchain |
| RUN apt-get update -qq && DEBIAN_FRONTEND="noninteractive" apt-get install -y -qq \ |
| flex \ |
| bison \ |
| texinfo \ |
| libncurses5-dev \ |
| m4 \ |
| make \ |
| gcc \ |
| g++ \ |
| wget |
| |
| # Download toolchain source code |
| RUN mkdir -p /tools/renesas-tools/source/binutils && \ |
| curl -s -L "https://gcc-renesas.com/downloads/d.php?f=rx/binutils/4.8.4.201803-gnurx/rx_binutils2.24_2018Q3.tar.gz" \ |
| | tar -C renesas-tools/source/binutils --strip-components=1 -xz |
| RUN mkdir -p /tools/renesas-tools/source/gcc && \ |
| curl -s -L "https://gcc-renesas.com/downloads/d.php?f=rx/gcc/4.8.4.201803-gnurx/rx_gcc_4.8.4_2018Q3.tar.gz" \ |
| | tar -C renesas-tools/source/gcc --strip-components=1 -xz |
| RUN mkdir -p /tools/renesas-tools/source/newlib && \ |
| curl -s -L "https://gcc-renesas.com/downloads/d.php?f=rx/newlib/4.8.4.201803-gnurx/rx_newlib2.2.0_2018Q3.tar.gz" \ |
| | tar -C renesas-tools/source/newlib --strip-components=1 -xz |
| |
| # Install binutils |
| RUN cd renesas-tools/source/binutils && \ |
| chmod +x ./configure ./mkinstalldirs && \ |
| mkdir -p /tools/renesas-tools/build/binutils && cd /tools/renesas-tools/build/binutils && \ |
| /tools/renesas-tools/source/binutils/configure --target=rx-elf --prefix=/tools/renesas-toolchain/rx-elf-gcc --disable-werror &&\ |
| make && make install |
| ENV PATH="/tools/renesas-toolchain/rx-elf-gcc/bin:$PATH" |
| |
| # Install gcc |
| RUN cd renesas-tools/source/gcc && \ |
| chmod +x ./contrib/download_prerequisites ./configure ./move-if-change ./libgcc/mkheader.sh && \ |
| ./contrib/download_prerequisites && \ |
| sed -i '1s/^/@documentencoding ISO-8859-1\n/' ./gcc/doc/gcc.texi && \ |
| sed -i 's/@tex/\n&/g' ./gcc/doc/gcc.texi && sed -i 's/@end tex/\n&/g' ./gcc/doc/gcc.texi && \ |
| mkdir -p /tools/renesas-tools/build/gcc && cd /tools/renesas-tools/build/gcc && \ |
| /tools/renesas-tools/source/gcc/configure --target=rx-elf --prefix=/tools/renesas-toolchain/rx-elf-gcc \ |
| --disable-shared --disable-multilib --disable-libssp --disable-libstdcxx-pch --disable-werror --enable-lto \ |
| --enable-gold --with-pkgversion=GCC_Build_1.02 --with-newlib --enable-languages=c && \ |
| make && make install |
| ENV PATH="/tools/renesas-toolchain/rx-elf-gcc/bin:$PATH" |
| |
| # Install newlib |
| RUN cd renesas-tools/source/newlib && \ |
| chmod +x ./configure && \ |
| mkdir -p /tools/renesas-tools/build/newlib && cd /tools/renesas-tools/build/newlib && \ |
| /tools/renesas-tools/source/newlib/configure --target=rx-elf --prefix=/tools/renesas-toolchain/rx-elf-gcc && \ |
| make && make install |
| RUN cd /tools/renesas-tools/build/gcc && \ |
| make && make install |
| |
| |
| ############################################################################### |
| # Final Docker image used for running CI system. This includes all toolchains |
| # supported by the CI system. |
| ############################################################################### |
| FROM ubuntu:20.04 |
| LABEL maintainer="dev@nuttx.apache.org" |
| |
| RUN dpkg --add-architecture i386 |
| # This is used for the final images so make sure to not store apt cache |
| # Note: xtensa-esp32-elf-gdb is linked to libpython2.7 |
| RUN apt-get update -qq && DEBIAN_FRONTEND="noninteractive" apt-get install -y -qq --no-install-recommends \ |
| -o APT::Immediate-Configure=0 \ |
| avr-libc \ |
| build-essential \ |
| ccache \ |
| curl \ |
| gcc \ |
| gcc-avr \ |
| gcc-multilib \ |
| gettext \ |
| git \ |
| lib32z1-dev \ |
| libc6-dev-i386 \ |
| libasound2-dev libasound2-dev:i386 \ |
| libcurl4-openssl-dev \ |
| libpulse-dev libpulse-dev:i386 \ |
| libpython2.7 \ |
| libx11-dev libx11-dev:i386 \ |
| libxext-dev libxext-dev:i386 \ |
| linux-libc-dev:i386 \ |
| linux-headers-generic \ |
| python3 \ |
| python3-pip \ |
| python-is-python3 \ |
| u-boot-tools \ |
| unzip \ |
| wget \ |
| xxd \ |
| && rm -rf /var/lib/apt/lists/* |
| |
| |
| # Configure out base setup for adding python packages |
| ENV PIP_DISABLE_PIP_VERSION_CHECK=true |
| # This disables the cache with value 0. We do not want caching as it |
| # increases the images size. |
| ENV PIP_NO_CACHE_DIR=0 |
| # We are using the minimal python installation from the system so include |
| # setuptools and also wheel so we can use the binary releases of packages |
| # instead of requiring them to be compiled. |
| RUN pip3 install setuptools wheel |
| |
| RUN mkdir /tools |
| WORKDIR /tools |
| |
| # Pull in the tools we just built for nuttx |
| COPY --from=nuttx-tools /tools/genromfs/ /tools/genromfs/ |
| ENV PATH="/tools/genromfs/usr/bin:$PATH" |
| COPY --from=nuttx-tools /tools/kconfig-frontends/ kconfig-frontends/ |
| ENV PATH="/tools/kconfig-frontends/bin:$PATH" |
| COPY --from=nuttx-tools /tools/bloaty/ bloaty/ |
| ENV PATH="/tools/bloaty/bin:$PATH" |
| |
| # ARM toolchain |
| COPY --from=nuttx-toolchain-arm /tools/gcc-arm-none-eabi/ gcc-arm-none-eabi/ |
| ENV PATH="/tools/gcc-arm-none-eabi/bin:$PATH" |
| |
| # MIPS toolchain |
| COPY --from=nuttx-toolchain-pinguino /tools/pinguino-compilers/p32/ pinguino-compilers/p32/ |
| ENV PATH="/tools/pinguino-compilers/p32/bin:$PATH" |
| |
| # RISCV toolchain |
| COPY --from=nuttx-toolchain-riscv /tools/riscv64-unknown-elf-gcc/ riscv64-unknown-elf-gcc/ |
| ENV PATH="/tools/riscv64-unknown-elf-gcc/bin:$PATH" |
| |
| # ESP32 toolchain |
| COPY --from=nuttx-toolchain-esp32 /tools/xtensa-esp32-elf-gcc/ xtensa-esp32-elf-gcc/ |
| ENV PATH="/tools/xtensa-esp32-elf-gcc/bin:$PATH" |
| RUN mkdir -p /tools/blobs/esp-bins |
| COPY --from=nuttx-toolchain-esp32 /tools/blobs/* /tools/blobs/esp-bins/ |
| RUN pip3 install esptool |
| |
| # Renesas toolchain |
| COPY --from=nuttx-toolchain-renesas /tools/renesas-toolchain/rx-elf-gcc/ renesas-toolchain/rx-elf-gcc/ |
| ENV PATH="/tools/renesas-toolchain/rx-elf-gcc/bin:$PATH" |
| |
| # Configure ccache |
| RUN mkdir -p /tools/ccache/bin && \ |
| ln -sf `which ccache` /tools/ccache/bin/cc && \ |
| ln -sf `which ccache` /tools/ccache/bin/c++ && \ |
| ln -sf `which ccache` /tools/ccache/bin/clang && \ |
| ln -sf `which ccache` /tools/ccache/bin/clang++ && \ |
| ln -sf `which ccache` /tools/ccache/bin/gcc && \ |
| ln -sf `which ccache` /tools/ccache/bin/g++ && \ |
| ln -sf `which ccache` /tools/ccache/bin/arm-none-eabi-gcc && \ |
| ln -sf `which ccache` /tools/ccache/bin/arm-none-eabi-g++ && \ |
| ln -sf `which ccache` /tools/ccache/bin/p32-gcc && \ |
| ln -sf `which ccache` /tools/ccache/bin/riscv64-unknown-elf-gcc && \ |
| ln -sf `which ccache` /tools/ccache/bin/riscv64-unknown-elf-g++ && \ |
| ln -sf `which ccache` /tools/ccache/bin/xtensa-esp32-elf-gcc && \ |
| ln -sf `which ccache` /tools/ccache/bin/xtensa-esp32-elf-g++ && \ |
| ln -sf `which ccache` /tools/ccache/bin/avr-gcc && \ |
| ln -sf `which ccache` /tools/ccache/bin/avr-g++ && \ |
| ln -sf `which ccache` /tools/ccache/bin/rx-elf-gcc |
| ENV PATH="/tools/ccache/bin:$PATH" |
| |
| CMD [ "/bin/bash" ] |