| 5.19 2011-03-12 Gregory Nutt <gnutt@nuttx.org> |
| |
| * Initial version of the apps/ directory was released as contributed by |
| Uros Platise. |
| |
| 6.0 2011-03-21 Gregory Nutt <gnutt@nuttx.org> |
| |
| * README.txt -- README cosmetics |
| * hello/ -- hello world minor changes |
| * Makefile -- Makefile cosmetics (I am slowly adding the Darjeeling JVM) |
| * Make.defs -- New file adds common make definitions for applications. |
| * hello/Makefile -- Now uses new Make.defs definitions. Added README.txt. |
| * apps/poweroff -- New application to turn off board power. |
| * Moved NSH library, netutils, and examples from the nuttx/ directory to |
| the apps/ directory |
| * Moved exec_nuttapp machinery into the nuttapp/ directory. |
| |
| 6.1 2011-04-10 Gregory Nutt <gnutt@nuttx.org> |
| |
| * Creation of auto-generated header files now occurs during the context |
| build phase. |
| * Added sdcard insert and eject, nsh command '?' and some code remarks |
| * Renamed nuttapp to namedapp |
| * namedapp/binfs.c -- Create a tiny filesystem that can be used |
| to show the internal named apps under /bin. |
| * Numerous fixes to build system required to support building with native |
| Windows toolchain. |
| |
| 6.2 2011-05-06 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/nxffs: Add a test a a configuration that will be used to |
| verify NXFFS. |
| |
| 6.3 2011-05-15 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/interpreter: Add a directory to hold interpreters. The Pascal add- |
| on module now installs and builds under this directory. |
| * apps/interpreter/ficl: Added logic to build Ficl (the "Forth Inspired |
| Command Language"). See http://ficl.sourceforge.net/. |
| * apps/netutils/dhcpc, dhcpcd, and tftp. If these directories are included |
| in the configuration but CONFIG_NET_UDP is disable (which is not very wise), |
| then a make error occurs because tools/mkdep.sh is called with no files. |
| * system/free: Move Uros' custom free command from vsn/free |
| * system/install: Add a new install command submitted by Uros Platise. |
| * examples/rgmp. Add a placeholder for an RGMP build example. |
| RGMP is a project for running GPOS and RTOS simultaneously on |
| multi-processor platforms. See http://rgmp.sourceforge.net/wiki/index.php/Main_Page |
| for further information about RGMP. NOTE: This is an empty example |
| on initial check-in. |
| |
| 6.4 2011-06-06 Gregory Nutt <gnutt@nuttx.org> |
| |
| * nshlib/nsh_netcmds.c: If a network device name and IP address are provided |
| with the ifconfig command, then this command will now set the network address. |
| (Contributed by Yu Qiang). |
| * netutils/ftpc: A library to support client-side FTP. |
| * examples/ftpc: A simple add-on to the NSH. From NSH, you can start |
| this simple FTP shell to transfer files to/from a remote FTP server. |
| |
| 6.5 2011-06-21 Gregory Nutt <gnutt@nuttx.org> |
| |
| * netutils/ftpc: Simpflication and size reduction. |
| |
| 6.6 2011-07-11 Gregory Nutt <gnutt@nuttx.org> |
| |
| * Make.defs, namedapp/namedapp.c: Several structural changes made to get a |
| clean compile under the ez80 ZDS-II toolchain (no design changes). |
| * apps/examples/buttons: Add a test for the new standardized button interfaces |
| * apps/examples/nxtext: Add another NX graphics test. This one focus on |
| placing text on the background while pop-up windows occur. Text should |
| continue to update normally with or without the popup windows present. |
| |
| 6.7 2011-08-02 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/nx and nxtext: These examples can now be built as NSH |
| "built-in" commands. |
| * apps/examples/nxhello: The simplest graphics example: It just says |
| "Hello, World!" in the center of the display. This example can also be |
| built as an NSH "built-in" command. |
| * apps/examples/nx, ntext, and nxhello: All updated to use the new |
| NuttX font interfaces. |
| * apps/examples/nximage: Another super simple graphics example: It just puts |
| the NuttX logo in the center of the display. This example can also be |
| built as an NSH "built-in" command. |
| * apps/examples/usbstorage: Can now be built as two NSH "built-in" commands: |
| 'msconn' will connect the USB mass storage device; 'msdis' will disconnect |
| the USB storage device. |
| * apps/examples/nx*: All NX header files moved from nuttx/include/nuttx to |
| nuttx/include/nuttx/nx. |
| * apps/examples/usbstorage: Added instrumentation to monitor memory usage |
| to check for memory leaks in the USB storage driver. |
| * apps/examples/nxhello/nxhello_bkgd.c: Fix handling of allocated glyph |
| memory. |
| |
| 6.8 2011-08-11 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/nxlines: Added a test for NX line drawing capabilities. |
| |
| 6.9 2011-09-11 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/nxlines: Extend the line drawing text to include drawing |
| of circles. |
| * apps/system/i2c: Add an I2C test tool that should help to bring up I2C |
| devices (when it is fully functional). |
| * apps/nshlib/nsh_timcmds.c: Add the date command that can be used to |
| show or set the time (only if CONFIG_RTC is set). |
| |
| 6.10 2011-10-06 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/system/i2c: Add repitition and address auto-incrementing so that |
| and command can be executed numerous times. Add a new verify command |
| that will write to a register, read from register, and verify that |
| returned value. |
| * apps/graphics/tiff: Add a library that can be used to create TIFF files. |
| * apps/examples/tiff: Add a unit test for the TIFF file creation logic |
| * apps/examples/lcdrw: Add a test to verify if you can or can or read |
| data from an LCD correctly. |
| * apps/examples/usbterm: A USB terminal example.. more of a USB chat or |
| serial bridge: Data received on local console echoed via USB serial; |
| data received on USB serial is echoed on the local console. |
| * apps/examples/touchscreen: Add a simple, generic test for any |
| touschscreen driver. |
| * Makefile: The apps/ Makefile now checks for an apps/external directory |
| or symbolic link. If such a directory/link exists (and has a Makefile), |
| it will be added to the apps/ build. This allows external directories |
| to be included into the apps/ build by simply creating a symbolic link. |
| |
| 6.11 2011-11-12 Gregory Nutt <gnutt@nuttx.org> |
| |
| (No major changes from 6.10) |
| |
| 6.12 2011-12-06 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/buttons: The button test can now be executed as an NSH |
| built in command. |
| |
| 6.13 2012-12-26 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/dhcpd: May now be built as an NSH built-in application |
| by setting CONFIG_NSH_BUILTIN_APPS. |
| * apps/netutils/dhcpd/dhcpd.c: Fix several problems using host order address |
| where network addresses expected (and vice versa). |
| * apps/examples/nettest: May now be built as an NSH built-in application |
| by setting CONFIG_NSH_BUILTIN_APPS. |
| * apps/examples/nettest: Correct some build issues with the nettest is |
| built for performance evaluation. |
| * apps/examples/adc: Add a very simple test to drive and test an ADC |
| driver. |
| * apps/examples/pwm: Add an NSH PWM command to drive and test a PWM |
| driver. |
| * apps/examples/can: Add an NSH CAN command to drive and test a CAN |
| driver in loopback mode. |
| |
| 6.14 2012-01-15 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/buttons/main.c: The test needs to call up_buttoninit() to |
| properly configure the button interrupt GPIOs. |
| * apps/examples/pwm: Add support to test the pulse count option recently |
| added to the PWM interface. |
| |
| 6.15 2012-02-12 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/nshlib/nsh_serial.c and nsh_usbdev.c: If NuttX is configured to use |
| a USB serial console, then NSH needs to wait until the USB console is |
| connected and available. |
| * apps/examples/composite: Add a test of the USB composite device. |
| * apps/examples/Telnetd: Move the tiny uIP shell example from |
| netutils/Telnetd to examples/Telnetd. Enhanced the Telnetd daemon so that |
| it supports Telnetd via a TTY device driver: A new TTY device driver is |
| created when each new Telnet connection is created. The shell thread |
| is started with stdin, stdout, and stderr mapped to the TTY device. |
| * netutils/Telnetd: The old uIP Telnet demo is gone. In its place is a new |
| Telnet infrastructure. The new Telnet daemon creates sessions that are |
| "wrapped" as character devices and mapped to stdin, stdout, and stderr. |
| Now the Telnet session can be inherited by spawned tasks. |
| * examples/Telnetd: Add a test for the new Telnet daemon. |
| * examples/Telnetd/telnetd_driver.c: Move the internal socket structure from |
| the daemon's socket array into the driver's state data so that it will be |
| independent from the the Telnetd daemon. |
| * apps/system/readline: Moved the old nuttx/lib/stdio/lib_fgets.c here |
| and renamed it as readline(). The old fgets was simplied and the overloaded |
| readline functionality was removed. |
| * apps/netutils/ftpd: Add an FTPD server (does not even compile on initial |
| checkin). |
| * apps/examples/ftpd: Add a test for the FTPD server (untest on initial |
| check-in). |
| * apps/nshlib/nsh_fscmds.c: Add support for a 'dmesg' command that will |
| dump the system log if CONFIG_SYSLOG is selected. |
| |
| 6.16 2012-03-10 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/qencoder: Add a quadrature driver test. |
| * apps/examples/ostest/fpu.c: Add a test to verify that FPU registers |
| are properly saved and restored on context switches. |
| * apps/system/readline/readline.c: readline() will now treat either a |
| backspace or a DEL character as a backspace (i.e., deleting the character |
| to the left of the cursor). This makes NSH less dependent on particular |
| keyboard mappings of the Backspace key. Submitted by Mike Smith. |
| * apps/system/cdcacm: An example that illustrates how the CDC/ACM driver |
| may to connected and disconnected through software control. |
| * apps/examples/nsh/nsh_main.c: If available, call up_cxxinitialize() to |
| initialize all statically defined C++ classes. |
| * apps/nshlib: Now supports a USB serial device for NSH console I/O. This |
| allows NSH to be used on boards that have USB but no serial connectors. |
| |
| 6.17 2012-04-14 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/can: Add conditional compilation so that the test can be |
| configured to only send messages or to only receive messages. This will |
| let the test work in other modes than simple loopback testing. |
| * apps/examples/hello and apps/examples/ostest: Can now be built as NSH |
| built-int functions. |
| * vsn/hello: Removed. The modified apps/examples/hello is enough "Hello, |
| World!" |
| * apps/examples/nxconsole: Add a test of the NX console device. |
| * apps/examples/nxconsole: The NX console example now supports running |
| the NuttShell (NSH) within an NX window. |
| * apps/system/readline: Now uses standard definitions from |
| include/nuttx/ascii.h and vt100.h |
| * Kconfig, */Kconfig: Added skeleton Kconfig files to all directories that |
| may need them. |
| |
| 6.18 2012-05-19 Gregory Nutt <gnutt@nuttx.org> |
| |
| * Kconfig: Continued Kconfig file updates (no longer tracking on a per-file |
| basis in the ChangeLog) |
| * apps/examples/watchdog: Add a watchdog timer example. |
| * apps/examples/tiff: Fix wrong path used for temporary file. |
| * apps/examples/touchscreen: Standardize the board-specific, touchscreen |
| initialization interfaces. |
| |
| 6.19 2012-06-15 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/nshlib/nsh_usbdev.c: Add the capability to use an arbitrary USB |
| device as the console (not necessarily /dev/console). This is a useful |
| option because then you can still use the serial console to debug with. |
| * apps/nshlib/nsh_usbdev.c: User now has to press ENTER 3 times before |
| USB console will start. Otherwise, the USB console starts before there |
| is anyone at the other end to listen. |
| * apps/nshlib/nsh_usbdev.c and nsh_consolemain.c: Add support for the USB |
| capability when a USB console is used. |
| * apps/nshlib/nsh_fscmds.c: Add the 'mv' command |
| |
| 6.20 2012-07-12 Gregory Nutt <gnutt@nuttx.org> |
| |
| * namedapp/exec_namedapp.c - Correct an error when round robin scheduling |
| is enabled. The priority of the new, named application was erroneously |
| being set to the priority of the parent thread; losing its configured |
| priority. Reported by Mike Smith. |
| |
| 6.21 2012-08-25 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/include/: Stylistic clean-up of all header files. |
| * apps/modbus and apps/include/modbus: A port of freemodbus-v1.5.0 |
| has been added to the NuttX apps/ source tree. |
| * apps/examples/modbus: A port of the freemodbus-v1.5.0 "demo" |
| program that will be used to verify the FreeModBus port |
| * apps/modbus: Don't use strerror(). It is just too big. |
| * apps/modbus: Add CONFIG_MB_TERMIOS. If the driver doesn't support |
| termios ioctls, then don't bother trying to configure the baud, parity |
| etc. |
| * apps/nshlib: If waitpid() is supported, then NSH now catches the |
| return value from spawned applications (provided by Mike Smith) |
| * apps/nshlib: Lock the scheduler while starting built-in applications |
| in order to eliminate race conditions (also from Mike Smith). |
| * apps/examples/adc, pwm, and qencoder: Add support for testing |
| devices with multiple ADC, PWM, and QE devices. |
| * apps/nshlib/nsh_mntcmds.c: Separated mount-related commands out of |
| nsh_fscmds.c. Extended to the mount command so that if no arguments |
| are provided, then the current mountpoints are enumerated. |
| * apps/nshlib/nsh_mntcmds.c: Add an NSH df command to list the |
| properties of mounted file systems. |
| * apps/nshlib/nsh_parse.c: Extend help command options. 'help' with |
| no arguments outputs a short list of commands. With -v lists all |
| command line details. A command name can be added to just get |
| help on one command. |
| * system/readline.c: If character input/output is interrupted by a |
| signal, then readline() will try the read/write again. |
| * apps/*/Make.defs: Numerous fixes needed to use the automated |
| configuration (from Richard Cochran). |
| |
| 6.22 2012-09-29 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/netutils/thttpd/thttpd_cgi.c: Missing NULL in argv[] |
| list (contributed by Kate). |
| * apps/nshlib/nsh_parse.c: CONFIG_NSH_DISABLE_WGET not CONFIG_NSH_DISABLE_GET |
| in one location (found by Kate). |
| * apps/examples/ostest/prioinherit.c: Limit the number of test |
| threads to no more than 3 of each priority. Bad things happen |
| when the existing logic tried to created several hundred test |
| treads! |
| * apps/nshlib/nsh.h: Both CONFIG_LIBC_STRERROR and CONFIG_NSH_STRERROR |
| must be defined to use strerror() with NSH. |
| * apps/examples/*/*_main.c, system/i2c/i2c_main.c, and others: Added |
| configuration variable CONFIG_USER_ENTRYPOINT that may be used to change |
| the default entry from user_start to some other symbol. Contributed by |
| Kate. |
| * apps/netutils/webserver/httpd/c: Fix a typo that as introduced in |
| version r4402: 'lese' instead of 'else' (Noted by Max Holtzberg). |
| * tools/mkfsdata.pl: The uIP web server CGI image making perl script was |
| moved from apps/netutils/webserver/makefsdata to nuttx/tools/mkfsdata.pl |
| (Part of a larger change submitted by Max Holtzberg). |
| * apps/netutils/webserver, apps/examples/uip, and apps/include/netutils/httpd.h: |
| The "canned" version of the uIP web servers content that was at |
| netutils/webserver/httpd_fsdata.c has been replaced with a dynamically |
| built configuration located at apps/examples/uip (Contributed by |
| Max Holtzberg). |
| * apps/netutils/webserver: Several inenhancements from Kate including the |
| ability to elide scripting and SERVER headers and the ability to map |
| files into memory before transferring them. |
| * apps/netutils/webserver: Add ability to map a URL to CGI function. |
| Contributed by Kate. |
| * apps/nshlib/nsh_mntcmds.c: The changes of 6.21 introduced holes in the |
| error handling: Now the number of arguments to mount can be 0 or 4. |
| Additional parameter checking is required to prevent mysterious errors |
| (submiteed by Kate). |
| * apps/netutils/webserver/httpd_mmap.c: Fix errors when the mmap() |
| length is zero (submitted by Kate). |
| * apps/netutils/webserver/httpd_sendfile.c: Add and option, |
| CONFIG_NETUTILS_HTTPD_SENDFILE to transfer files using the NuttX |
| sendfile() interface. |
| * apps/netutils/discover: A UDP network discovery utility contributed |
| by Max Holtzberg. |
| * apps/examples/discover: A test example for the UDP network discovery |
| utility (also contribed by Max Holtzberg). |
| * apps/examples/*/main.c: Too many files called main.c. Each renamed |
| to something unique so that they will not collide in the archive. |
| * apps/netutils/xmlrpc: The Embeddable Lightweight XML-RPC Server |
| discussed at http://www.drdobbs.com/web-development/\ |
| an-embeddable-lightweight-xml-rpc-server/184405364. Contributed by |
| Max Holtzberg. |
| * apps/netutils/uip_listenon.c: Logic in uip_server.c that creates |
| the listening socket was moved to this new file to support re-use. |
| Contributed by Kate. |
| * apps/netutils/webserver/httpd.c: The option CONFIG_NETUTILS_HTTPD_SINGLECONNECT |
| can now be used to limit the server to a single thread. Option |
| CONFIG_NETUTILS_HTTPD_TIMEOUT can be used to generate HTTP 408 errors. |
| Both from Kate. |
| * apps/netutils/webserver/httpd.c: Improvements to HTTP parser from |
| Kate. |
| * apps/netutils/webserver/httpd.c: Add support for Keep-alive connections |
| (from Kate). |
| * apps/NxWidget/Kconfig: This is a kludge. I created this NxWidgets |
| directory that ONLY contains Kconfig. NxWidgets does not live in |
| either the nuttx/ or the apps/ source trees. This kludge makes it |
| possible to configure NxWidgets/NxWM without too much trouble (with |
| the tradeoff being a kind ugly structure and some maintenance issues). |
| * apps/examples/Make.defs: Missing support for apps/examples/watchdog. |
| * apps/NxWidgets/Kconfig: Add option to turn on the memory monitor |
| feature of the NxWidgets/NxWM unit tests. |
| |
| 6.23 2012-11-05 Gregory Nutt <gnutt@nuttx.org> |
| |
| * vsn: Moved all NSH commands from vsn/ to system/. Deleted the vsn/ |
| directory. |
| * Makefile: Change order of includes when CONFIG_NEWCONFIG=y. In |
| that case, namedapp must be included first so that the namedapp |
| context is established first. If the namedapp context is established |
| later, it will overwrite any existing namedapp_list.h and nameapp_proto.h |
| files. |
| * CONFIG_EXAMPLES_*: To make things consistent, changed all occurrences |
| of CONFIG_EXAMPLE_* to CONFIG_EXAMPLES_*. |
| * Kconfig: Fleshed out apps/examples/adc/Kconfig and apps/examples/wget/Kconfig. |
| There are still a LOT of empty, stub Kconfig files. |
| * Kconfig: Fleshed out apps/examples/buttons/Kconfig. There are still a LOT |
| of empty, stub Kconfig files. |
| * apps/netutils/webserver/httpd.c: Fix a bug that I introduced in |
| recent check-ins (Darcy Gong). |
| * apps/netutils/webclient/webclient.c: Fix another but that I introduced |
| when I was trying to add correct handling for loss of connection (Darcy Gong) |
| * apps/nshlib/nsh_telnetd.c: Add support for login to Telnet session via |
| username and password (Darcy Gong). |
| * apps/netutils/resolv/resolv.c (and files using the DNS resolver): Various |
| DNS address resolution improvements from Darcy Gong. |
| * apps/nshlib/nsh_netcmds.c: The ping command now passes a maximum round |
| trip time to uip_icmpping(). This allows pinging of hosts on complex |
| networks where the ICMP ECHO round trip time may exceed the ping interval. |
| * apps/examples/nxtext/nxtext_main.c: Fix bad conditional compilation |
| when CONFIG_NX_KBD is not defined. Submitted by Petteri Aimonen. |
| * apps/examples/nximage/nximage_main.c: Add a 5 second delay after the |
| NX logo is presented so that there is time for the image to be verified. |
| Suggested by Petteri Aimonen. |
| * apps/Makefile: Small change that reduces the number of shell invocations |
| by one (Mike Smith). |
| * apps/examples/elf: Test example for the ELF loader. |
| * apps/examples/elf: The ELF module test example appears fully functional. |
| * apps/netutils/json: Add a snapshot of the cJSON project. Contributed by |
| Darcy Gong. |
| * apps/examples/json: Test example for cJSON from Darcy Gong |
| * apps/nshlib/nsh_netinit.c: Fix static IP DNS problem (Darcy Gong) |
| * apps/netutils/resolv/resolv.c: DNS fixes from Darcy Gong. |
| * COPYING: Licensing information added. |
| * apps/netutils/codec and include/netutils/urldecode.h, base64.h, and md5.h: |
| A port of the BASE46, MD5 and URL CODEC library from Darcy Gong. |
| * nsnlib/nsh_codeccmd.c: NSH commands to use the CODEC library. |
| Contributed by Darcy Gong. |
| * apps/examples/wgetjson: Test example contributed by Darcy Gong |
| * apps/examples/cxxtest: A test for the uClibc++ library provided by |
| Qiang Yu and the RGMP team. |
| * apps/netutils/webclient, apps/netutils.codes, and apps/examples/wgetjson: |
| Add support for wget POST interface. Contributed by Darcy Gong. |
| * apps/examples/relays: A relay example contributed by Darcy Gong. |
| * apps/nshlib/nsh_netcmds: Add ifup and ifdown commands (from Darcy |
| Gong). |
| * apps/nshlib/nsh_netcmds: Extend the ifconfig command so that it |
| supports setting IP addresses, network masks, name server addresses, |
| and hardware address (from Darcy Gong). |
| |
| 6.24 2012-12-20 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/ostest/roundrobin.c: Replace large tables with |
| algorithmic prime number generation. This allows the roundrobin |
| test to run on platforms with minimal SRAM (Freddie Chopin). |
| * apps/nshlib/nsh_dbgcmds.c: Add hexdump command to dump the contents |
| of a file (or character device) to the console Contributed by Petteri |
| Aimonen. |
| * apps/examples/modbus: Fixes from Freddie Chopin |
| * apps/examples/modbus/Kconfig: Kconfig logic for FreeModBus contributed |
| by Freddie Chopin. |
| * Makefile, */Makefile: Various fixes for Windows native build. Now uses |
| make foreach loops instead of shell loops. |
| * apps/examples/elf/test/*/Makefile: OSX doesn't support install -D, use |
| mkdir -p then install without the -D. From Mike Smith. |
| * apps/examples/relays/Makefile: Reduced stack requirement (Darcy Gong). |
| * apps/nshlib and apps/netutils/dhcpc: Extend the NSH ifconfig command plus |
| various DHCPC improvements(Darcy Gong). |
| * apps/nshlib/nsh_apps.c: Fix compilation errors when CONFIG_NSH_DISABLEBG=y. |
| From Freddie Chopin. |
| * Rename CONFIG_PCODE and CONFIG_FICL as CONFIG_INTERPRETERS_PCODE and |
| CONFIG_INTERPRETERS_FICL for consistency with other configuration naming. |
| * apps/examples/keypadtest: A keypad test example contributed by Denis |
| Carikli. |
| * apps/examples/elf and nxflat: If CONFIG_BINFMT_EXEPATH is defined, these |
| tests will now use a relative path to the program and expect the binfmt/ |
| logic to find the absolute path to the program using the PATH variable. |
| |
| 6.25 2013-02-01 Gregory Nutt <gnutt@nuttx.org> |
| |
| * Makefiles: Removed dependency of distclean on clean in most top-level |
| files. It makes sense for 'leaf' Makefiles to have this dependency, |
| but it does not make sense for upper-level Makefiles. |
| * apps/namedapp/: Renamed to builtins in preparation for another change. |
| * .context: Removed the .context kludge. This caused lots of problems |
| when changing configurations because there is no easy way to get the |
| system to rebuild the context. Now, the context will be rebuilt |
| whenever there is a change in either .config or the Makefile. |
| * apps/builtin/registry: Updated new built-in registration logic to handle |
| cases where (1) old apps/.config is used, and (2) applications ared |
| removed, not just added. |
| * apps/examples/nettest/Makefile: Fix an error that crept in during |
| some of the recent, massive build system changes. |
| * apps/builtin/Makefile: Need to have auto-generated header files |
| in place early in the dependency generation phase to avoid warnings. |
| It is not important if they are only stubbed out header files at |
| this build phase. |
| * apps/examples/hidbkd: Now supports decoding of encoded special keys |
| if CONFIG_EXAMPLES_HIDKBD_ENCODED is defined. |
| * apps/examples/hidbkd: Add support for decoding key release events |
| as well. However, the USB HID keyboard drier has not yet been |
| updated to detect key release events. That is kind of tricky in |
| the USB HID keyboard report data. |
| * apps/examples/wlan: Remove non-functional example. |
| * apps/examples/ostest/vfork.c: Added a test of vfork(). |
| * apps/exampes/posix_spawn: Added a test of posix_spawn(). |
| * apps/examples/ostest: Extend signal handler test to catch |
| death-of-child signals (SIGCHLD). |
| * apps/examples/ostest/waitpid.c: Add a test for waitpid(), waitid(), |
| and wait(). |
| * builtin/binfs.c: Add hooks for dup() method (not implemented). |
| * builtin/exec_builtin.c, nshlib/nsh_parse.c, and nshlib/nsh_builtin.c: |
| NSH now supports re-direction of I/O to files (but still not from). |
| * builtin/binfs.c: Greatly simplified (it is going to need to be |
| very lightweight). Now supports open, close, and a new ioctl to recover |
| the builtin filename. The latter will be needed to support a binfs |
| binfmt. |
| * builtin/binfs.c: Move apps/builtin/binfs.c to fs/binfs/fs_binfs.c |
| CONFIG_APPS_BINDIR rename CONFIG_FS_BINFS |
| * apps/include/builtin.h: Some of the content of |
| apps/include/apps.h moved to include/nuttx/binfmt/builtin.h. |
| apps/include/apps.h renamed builtin.h |
| * apps/builtin/exec_builtins.c: Move builtin |
| utility functions from apps/builtin/exec_builtins.c to |
| binfmt/libbuiltin/libbuiltin_utils.c |
| * apps/nshlib/nsh_mountcmds.c: The block driver/source |
| argument is now optional. Many files systems do not need |
| a source and it is really stupid to have to enter a bogus |
| source parameter. |
| * apps/nshlib/nsh_fileapp.c: Add the ability to execute a file |
| from a file system using posix_spawn(). |
| * apps/builtin/: Extensions from Mike Smith. |
| * apps/examples/ftpd/Makefile: Name ftpd_start is not the name of |
| the entrypoint. Should be ftpd_main (from Yan T.) |
| * apps/netutils/telnetd/telnetd_driver: Was stuck in a loop if |
| recv[from]() ever returned a value <= 0. |
| * apps/examples/nettest and poll: Complete Kconfig files. |
| * apps/examples/ostest/waitpid.c: Need to use WEXITSTATUS() |
| to decode the correct exit status. |
| * apps/system/usbmonitor: A daemon that can be used to monitor USB |
| trace outpout. |
| * apps/nshlib/nsh_usbdev.c, nsh_consolemain.c, nsh_session.c, nsh_script.c: |
| Add support for a login script. The init.d/rcS script will be executed |
| once when NSH starts; the .nshrc script will be executed for each session: |
| Once for serial, once for each USB connection, once for each Telnet |
| session. |
| * apps/system/readline: Correct readline() return value. Was not |
| any returning special values when end-of-file or read errors |
| occur (it would return an empty string which is not very useful). |
| |
| 6.26 2013-03-15 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/builtin/exec_builtin.c: Now uses task_spawn() to start |
| builtin applications. |
| * Type of argv has changed from const char ** to char * const * |
| * apps/nshlib/nsh_parse.c: Fix memory lead: Need to detach after |
| creating a pthread. |
| * apps/examples and nshlib: Change name of _TCB to struct tcb_s to |
| match NuttX name change. |
| * apps/examples/ostest/restart.c: Add a test case to verify |
| task_restart(). |
| * apps/system/readline.c: readline() now returns EOF on any failure |
| (instead of a negated errno value). This is because the underlying |
| read is based on logic similar to getc. The value zero was being |
| confused with a NUL. So if a NUL was received, the NSH session |
| would terminate because it thought it was the end of file. |
| |
| 6.27 2013-04-28 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/system/ramtest: Add a simple memory test (2013-03-26). |
| * apps/examples/ostest: In the non-cancelable thread test, we need |
| to give the thread an opportunity to run and to set the non- |
| cancelable state. |
| * apps/nshlib/nsh_ddcmd.c: Correct the test of the skip input |
| parameter. Was limiting the range to <= count. From Ken |
| Petit (2014-4-24). |
| |
| 6.28 2013-06-14 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/mtdpart: Provides a simple test of MTD partitions. |
| * apps/nshlib/nsh_mntcmds.c: Add a -h option to the df command to show |
| the volume information in human readable form (Ken Petit, 2013-4-30). |
| * apps/nshlib/nsh_fscmds.c: Add support for the mksmartfs command. |
| (Ken Petit, 2013-4-30). |
| * apps/system/flash_eraseall: Add an interface to erase FLASH using a |
| flash_eraseall NSH command (Ken Pettit, 2013-5-1). |
| * apps/examples/flash_test and apps/examples/smart_test: Add tests of |
| the SMART block driver and file system (Ken Pettit, 2013-5-1). |
| * apps/examples/mtdpart: Extended the test. The original test |
| coverage was superficial (2013-5-3). |
| * apps/examples/smart: This is an adaptation of the NXFFS stress |
| test for the SMART file system (Ken Pettit, 2013-5-3). |
| * apps/examplex/nxtext: Remove the CONFIG_EXAMPLES_NXTEXT_NOGETRUN |
| option. The test logic was bad for the case where this options |
| is not selected. Also, complete the empty Kconfig file (2013-5-7). |
| * apps/NxWidgets/Kconfig: Updated to match NxWidgets/Kconfig by |
| Ken Pettit (2013-5-11). |
| * apps/examples/helloxx: C++ name mangling was occurring when this |
| example is built as an NSH built-in application. (2013-5-16). |
| * apps/netutils/discover: Added a runtime configuration for the |
| UDP discover utility. From Max Holtzberg (2013-5-21). |
| * apps/examples/tcpecho: Added a simple single threaded, poll based |
| TCP echo server based on W. Richard Stevens UNIX Network Programming |
| Book. Contributed by Max Holtzberg (2013-5-22). |
| * apps/examples/slcd: Add an example for testing alphanumeric, |
| segment LCDs (2013-5-24). |
| * apps/examples/slcd: Extend SLCD test to handle multi-line displays |
| (2013-5-26). |
| * apps/examples/slcd: This test now sets the SLCD brightness level to |
| the mid-point as part of its initialization (2013-5-27). |
| * .gitignore: Clean-up of most all .gitignore files: Make scope of |
| ignore to be only the current directory; Ignore .dSYM files in |
| directories where .exe's may be build. Also, in Makefiles, |
| clean .dSYM files in directories where .exe may be built (2013-5-30). |
| * apps/examples/nrf35l01_term: Add an example application to demo the |
| nRF24L01 driver. From Laurent Latil (2013-6-1). |
| * apps/nshlib/Kconfig: Add some missing NSH configuration values. |
| From Lorenz Meier (2013-6-2). |
| * Standardize on CONFIG_NSH_BUILTIN_APPS. Remove all other variants |
| of the build-as-an-NSH-application configuration settings |
| (2013-6-12). |
| |
| 6.29 2013-07-31 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/nsh, cxxtest, and helloxx: C++ initializers should be |
| set once and, preferably, in the context of the task that uses any C++ |
| statically initialized classes. These only becomes an issue if cxxtest |
| or helloxx are built as NSH builtin applications. Then you want the |
| initialization done in cxxtext or helloxx and not in NSH (and certainly |
| not twice). Added configuration options to control who does the C++ |
| initialization. NSH now does not do C++ initialization be default and |
| must be configured to do otherwise. Converely, cxxtest and helloxx |
| will do C++ initialization unless configured do otherwise (2013-6-21). |
| * apps/examples/cxxtext: Add ostream test as provided by Michael |
| (2013-6-21). |
| * apps/examples/nxhello: Minor fix for compilation error when the |
| display resolution is low (< 8bpp) due to a typo that has been there |
| for a long time (2013-6-23). |
| * apps/examplex/nxhello: Correct default colors when in Y1 code mode. |
| (2013-6-24). |
| * apps/system/Make.defs and Kconfig: The RAM test was not correctly built |
| into the configuration and build system (2013-6-26). |
| * apps/examples/composite/composite_main.c: SourceForge But Ticket #19. |
| Change to prevent some false alarm debug assertions (From Chia Cheng |
| Tao, 2013-7-9). |
| * apps/system/zmodem: Add configuration support and a build framework |
| for the Zmodem sz and rz command (which exist but have not yet been |
| checked in) (2013-7-12). |
| * apps/system/zmodem: The 'sz' command is now complete and seems |
| functional (given on light testing). The rz command logic exists but |
| is still untested and not yet checked in (2013-7-13). |
| * apps/system/zmodem: The 'rz' command is now complete and functional |
| under certain conditaions. There are, however, some data overrun |
| issues that I am still uncertain how should be handled (2012-7-15). |
| * apps/system/zmodem/Makefile.host and host/: The Zmodem utilities |
| can now be built to execute on a Linux host. |
| * apps/nshlib/nsh_fscmds.c: Add a 'cmp' command that can be used to |
| compare two files for equivalence. Returns an indication if the files |
| differ. Contributed by Andrew Tridgell (via Lorenz Meier) (2013-7-18). |
| |
| 6.30 2013-09-14 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/composite/: SourceForge bug #19: Fix a typo that can |
| cause a configuration error. From CCTSAO (2013-9-4). |
| * apps/examples/cc3000. Initial support for the TI CC3000 network module |
| on the Freescale Freedom-KL25Z board from Alan Carvalho de Assis. |
| Includes the test to verify the CC3000 (2013-9-3). |
| * apps/examples/usbmsc: apps/examples/usbstorage renamed usbmsc. |
| Change submitted by CCTSAO (2013-6-5). |
| * apps/examples/pwm: Clean-up some configuration confusion (2013-9-5). |
| * apps/netutils/dhcpd/dhcpd.c: Fix calculation of the next lease |
| address. SourceForge bug #21 from Paolo Messina (2013-9-6). |
| * apps/examples/usbmsc: Don't try to control USB trace if we are |
| an NSH built-in task. In that case our attempts are inadequate |
| and only interfere with with other logic that is attempting to |
| to do the same thing (in NSH or in the USB monitor) (2013-9-6). |
| * apps/examples/usbmsc: IMPORTANT bug fix: Change how the msconn |
| works. Because of recent changes the msconn command was hanging. |
| This was because the USB MSC start-up logic creates a pthread; |
| Now waitpid() will wait until all members of the task group |
| exit. So NSH was hanging in waitpid when msconn started even |
| though msconn returned. The USB MSC logic really should not use |
| a pthread, but we are stuck with that for now. The work-around |
| is that msconn now daemonizes itself so that it so that the pthread |
| is created in a different task group (2013-9-7). |
| * apps/system/usbmonitor: The USB monitor has been extended so |
| that it can be used with USB device or host trace data (2013-9-9). |
| * apps/nshlib/nsh_fscmds.c: Fix NSH listing output for the case |
| of a single file. Provided by Lorenz Meier (2013-9-13). |
| |
| 6.31 2013-10-28 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/nshlib/nsh_netcmds.c: Remove a warning when DHCP is not |
| enabled (2013-9-17). |
| * apps/nshlib/Kconfig: Default IP address should be 0x0a000001 |
| (10.0.0.1), not 0xa0000001 (160.0.0.1). Ditto for the gateway |
| (2013-9017). |
| * apps/examples/ostest/Kconfig: Add configuration options for |
| the FPU test. There are still many OS test configuration |
| options that do not appear in Kconfig (2013-9-18). |
| * apps/examples/cc3000: Condition the CC3000 example on having |
| selected the CC3000 device. Otherwise, you are prompted for |
| this option on each 'make oldconfig' (2013-9-18). |
| * apps/system/usbmonitor/usbmonitor.c: Fix some bad conditional |
| compilation probably introduced on 2013-9-9 (2013-9-23). |
| * apps/system/stackmonitor: Add a daemon that can be used to |
| monitor stack usage by all threads (2013-9-24). |
| * system/usbmsc: Move examples/usbmsc to system/usbmsc (2013-9-25). |
| * system/cdcacm: Move examples/cdcacm to system/cdcacm (2013-9-25). |
| * system/composite: Move examples/composite to system/composite |
| (2013-9-25). |
| * apps/nshlib and apps/readline: Numerous changes to get NSH |
| working with no file system. Basically this suppresses I/O |
| redirection and replaces file I/O with calls to low-level |
| console read/write functions. Suggested by Alan Carvalho de Assis |
| in a somewhat different form. (2013-9-30). |
| * apps/nshlib/nsm_routecmds.c: Add addroute and delroute |
| commands (2013-10-5). |
| * apps/system/i2ctool/Kconfig: Fix default I2C frequency: 400KHz |
| instead of 4MHz. Suggested by Max Kriegleder (2013-10-10). |
| * apps/system/info/Kconfig and Makefile: Increase stack size. |
| Ken Petit reports that this simple command can exceed its 768 |
| stack size under certain conditions. The size is marginal and |
| has been increased to 1024 by default but is also now configurable |
| (2013-10-14). |
| * apps/Makefile: Need to include external/Make.defs if we want |
| allow external applications to participate in the NuttX |
| configuration. Suggested by gdi@embedders.org (2013-10-14). |
| * apps/examples/cc3300: Updates as part of larger re-organizaion |
| of CC3000 logic by David Sidrane (2013-10-16). |
| * apps/examples/random: Add a simple test that dumps values from |
| /dev/random (2013-10-20). |
| * apps/examples/cc3000: Extensions and enhancements from David |
| Sidrane (2013-10-23). |
| * apps/netutils/telnetd/telnetd_driver.c: Missing argument to |
| debug statement can cause crashes in certain error conditions. |
| From David Sidrane (2013-10-24). |
| * apps/examples/cc3000: Updates from David Sidrane. Plus |
| some kruft removal (2013-10-24). |
| * apps/examples/can/can_main.c: Correct an error in a debug |
| statement. From Martin Lederhilger (2013-10-24). |
| * apps/examples/adc: Add support so that a ADC driven by |
| software triggering can be tested (2013-10-25). |
| * apps/examples/cc3000: Updates from David Sidrane (2013-10-25). |
| * apps/system/nxplayer: Implements a command line media |
| player. From Ken Pettit (2013-10-27). |
| * apps/system/nxplayer: Add logic to verify the audio sub-format. |
| From Ken Pettit (2013-10-28). |
| |
| 6.32 2013-12-07 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/platform: A new home for board-specific application code |
| (2013-10-30). |
| * apps/include/platform/configdata.h: Define an interface that can be |
| used to manage platform-specific storage of configuration data |
| (2013-10-30). |
| * apps/examples/cc3000: Fine tuning of memory usage from David Sidrane |
| (2013-10-30). |
| * apps/platform/mikroe-stm32f4: Now supports storage of configuration |
| data. From Ken Pettit (2013-10-30). |
| * apps/nshlib/nsh_dbgcmds.c and others: Add skip= and count= |
| options to the hexdump command. From Ken Pettit (2013-11-1). |
| * apps/platform/mikroe-stm32f4: Now uses /dev/config for configuration |
| data storage. From Ken Pettit (2013-11-1). |
| * apps/platform/Makefile: Was not dealing with the bin sub-directory |
| correctly (2013-11-2). |
| * apps/examples/configdata: A unit test for the MTD configuration |
| data driver from Ken Pettit (2013-11-4). |
| * apps/platform/mikroe-stm32f4: Updated to use new MTD configuration |
| driver features. From Ken Pettit (2013-11-1). |
| * apps/nshlib/nsh.h: Allow USB trace without a USB console. From |
| David Sidrane (2013-11-06). |
| * apps/system/composite/composite_main.c: The wrong handle was getting |
| nullified. From David Sidrane (2013-11-7). |
| * apps/system/nxplayer: Play thread stack size is now configurable. All |
| NxPlayer threads now have names assigned via pthread_setname_np(). |
| From Ken Pettit (2013-11-10). |
| * apps/examples/i2schar: The beginning of an I2S test based on the I2S |
| character driver (2013-11-10). |
| * apps/nshlib/nsh_mntcmds.c: Mount command updates from Ken Pettit |
| (2013-11-17). |
| * apps/examples/hidkbd/hidkbd_main.c: Now calls a function named |
| arch_usbhost_initialize() that must be provided by the platform- |
| specific code (2013-11-29). |
| * apps/nshlib/nsh_fscmds.c: Add an option to the mkfatfs command to |
| specify FAT12, FAT16, or FAT32 (2013-12-5). |
| |
| 6.33 2014-01-30 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/nshlib/nsh_mntcmds.c: Modified the df -h logic to eliminate |
| truncating numbers in conversion (like 7900 -> 7M). From Ken |
| Pettit (2013-12-12). |
| * Moved configs/stm3240g-eval/src/up_cxxinitialize.c to |
| apps/platform/stm3240g-eval/up_cxxinitialize.c: Now it is available |
| in user-space in the kernel mode build (2013-12-29). |
| * apps/examples/mount/Kconfig: Fill in empty Kconfig file (2013-12-31). |
| * builtin/Makefile: Fixes for native Windows build from Max Holtzberg |
| (2014-1-4). |
| * apps/netutils/dhcpc/Kconfig, resolv/Kconfig, telnetd/Kconfig, and |
| apps/nshlib/Kconfig: Refactor some configuration dependencies: NSH |
| features should depend on netutil selections; netutil selections |
| should depend on networking selections. (2014-1-9). |
| * apps/nshlib/nsh_command.c: Separate NSH command handling from NSH |
| line parsing. This re-partitioning simplifies the logic and will |
| enable some things to come (2014-1-10). |
| * apps/nshlib/nsh_parse.c: Will now support multiple commands on a |
| command line, each separated with a semi-colon (2014-1-10). |
| * apps/nshlib/nsh_parse.c: Put the logic that executes a command |
| after parsing parameters into a separate file so that it can be |
| reused (2014-1-10). |
| * apps/nshlib/nsh_parse.c: Add initial support of commands enclosed |
| in back quotes as command arguments. Functionality still incomplete |
| on initial commit (2014-1-10). |
| * Logic to support commands enclosed in back quotes is functional |
| but not thoroughly tested (2014-1-11). |
| * apps/nshlib/nsh_parse.c: Can now handle arguments that are |
| concatenations of constant strings, command return data, application |
| return data, and environment variables (2014-1-11). |
| * apps/nshlib/nsh_parse.c: Fix a memory leak ... forgot to close |
| a temporary file (2013-1-12). |
| * apps/system/inifile: A simple INI file parser (perhaps too simple). |
| This is code that I wrote a long time ago and have used many time but |
| is untested in its current incarnation (2014-1-15). |
| * aps/nshlib/nsh_parse.c: Recent changes broke redirection of output |
| (2014-1-14). |
| * apps/nshlib/nsh_parse.c: Add true and false commands (2014-1-17) |
| * apps/nshlib/nsh.h and nsh_parse.c: Re-name and re-organize some |
| if-then-else related structures to better support forthcoming until |
| and while loops (2014-1-17). |
| * apps/nshlib/nsh_script.c: Now saves the FILE stream for the script |
| file in the vtbl structure so that it can be accessed by forthcoming |
| while and until logic (2014-1-17). |
| * apps/nshlib/nsh.h, nsh_command.c, nsh_parse.c, and nsh_script.c: Add |
| support for while-do-done and until-do-done loops. These only work |
| when executing a script file because they depend on the ability to seek |
| in the file to implement the looping behaviors (2014-1-17). |
| * apps/nshlib/nsh_parse.c: Loosen up if-then-else-fi syntax to allow |
| a command to be on the same line as the then and else tokens like: |
| "if true; then echo true; else echo false; fi". Much more like bash! |
| (2014-1-17). |
| * apps/nshlib/Kconfig, README.txt, nsh.h, nsh_command.c, and |
| nsh_script.c: Add an option to conditionally compile out support for |
| loop and for if-then-else-fi sequence (2014-1-17). |
| * apps/nshlib/nsh.h, nsh_command.c, and nsh_parse.c: Add a break |
| command that can be executed with a loop to terminate the loop |
| immediately (2014-1-17). |
| * apps/system/vi: Add support for a tiny, VI work-alike editor. This |
| is still very much a work-in-progress on initial check-in (2014-1-20). |
| * apps/netutils/uiplib: Support new definitions and state passing for |
| network device status. From Maz Holtzberg (2014-1-21). |
| * apps/system/vi: Tiny VI is basically functional. All commands seem |
| to work. There are still some display artifacts and probably several |
| untested conditions (2014-1-21). |
| |
| 7.1 2014-03-15 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/system/cle: Add a EMACS-like command line editor. This CLE, |
| is really more like readline than the NuttX readline is! (2014-02-02). |
| * apps/nshlib: Use of the standard tiny readline (about .25KB) is now |
| an option and can be replaces with the EMACX-like CLE (about 2KB) |
| (2014-02-02). |
| * Several changes to restore Windows native build (2014-2-7) |
| * apps/examples/touchscreen: Can now be configured to work with a mouse |
| interface as well (2014-2-10). |
| * Several files changes based on complaints from the tool CppCheck. Some |
| latent bugs were fixed (and most likely some new typos were introduced) |
| (2014-2-10). |
| * apps/examples/nximage/Kconfig and apps/examples/uip/Kconfig: Incomplete |
| Kconfig files fleshed out by Alan Carvalho de Assis (2014-2-18). |
| * apps/nshlib: 'rmdir' can now be used in the pseudo-filesystem. Hence, |
| the command needs to be available even if there are no write-able |
| filesystem enabled (2014-2-19). |
| * apps/nshlib: 'mkdir' can now be used in the pseudo-filesystem. Hence, |
| the command needs to be available even if there are no write-able |
| filesystem enabled (2014-2-19). |
| * apps/nshlib: 'mv' can now be used in the pseudo-filesystem. Hence, |
| the 'mv' command needs to be available even if there are no write-able |
| filesystem enabled (2014-2-19). |
| * apps/nshlib: 'rm' can now be used to remove nodes from the pseudo- |
| filesystem. Hence, the 'rm' command needs to be available even if there |
| are no write-able filesystem enabled (2014-2-20). |
| * CONFIG_DISABLE_PSEUDOFS_OPERATIONS: This new configuration setting |
| basically backs out the recent changes to mv, rm, mkdir, and rmdir |
| (2014-2-20). |
| * nshlib/Kconfig: Use CONFIG_DEFAULT_SMALL in selecting default |
| settings (2014-2-20). |
| * nshlib/nsh_telnetd.c: Use strncpy vs strcpy to avoid overruning the |
| username and password buffers. From Bertold Van den Bergh (2014-2-22). |
| * nshlib/Kconfig, nsh_proccmds.c: If the CPU load feature and the procfs |
| features are enabled, then show CPU load used by each thread in the |
| 'ps' command (2014-2-27). |
| * nshlib/nsh_fscmds.c: Add a newline after printing the file in the |
| 'cat' command. This prevents the NSH prompt from be in the same line |
| as the final line of the file in the case where there is no newline |
| at the end of the file (2014-2-27). |
| * netutils/dhcpd/dhcpd.c: allocipaddr() should not call ntohl(), the |
| returned IP address is already in host order. |
| * apps/netutils/dhcpd/Kconfig: Add missing DHCPD configuration |
| settings(2014-3-3). |
| * Support for the legacy configuration mechanism (using appconfig files) |
| is removed. Only the newer configuration using the kconfig-frontends |
| tools is now supported (2014-3-6). |
| |
| 7.2 2014-04-29 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/nshlib/nsh_parse.c: Fix NuttShell version number display in |
| welcome message. version.h was not being included (2014-3-23). |
| * apps/examples/igmp: Fill out Kconfig file; update makefile so |
| that the IGMP example can be used as an NSH built-in application. |
| From Manuel Stühn (2014-3-24). |
| * apps/system/usbmsc: Back out the USBMSC daemon... it is no longer |
| needed with the recent fix to the USBMSC class driver (2014-3-25). |
| * apps/examples/lcdrw: Fill out empty Kconfig file (2014-2-27). |
| * apps/netutils/dhcpd/dhcpd.c: The correct value of the PAD option |
| is zero, not one. From Brennan Ashton (2014-3-31). |
| * apps/sysinfo: CONFIG_VERSION_BUILD is a string an needs to be |
| printed with %s, not %d. Noted by Librae (2014-4-8). |
| * apps/netutils/ntpclient/ and apps/include/netufils/ntpclient.h: Add |
| a very primitive NTP client. The initial check-in is untested and |
| probably incomplete (2014-4-10). |
| * apps/netutils/resolv: Long needed major clean up for coding style |
| and unification of naming conventions (resolv vs dns) (2014-4-11). |
| * apps/netutils/dnsclient and include/netutils/dnsclient.h: File name |
| changes that are part of the overal resolv->dns renaming (2014-4-11). |
| * apps/netutils/dnsclient: Break the one big monolithic file into |
| three smaller files (2014-4-11). |
| * apps/netutils/ntpclient/ntpclient.c: Corrections to the NTP client |
| from Manuel Stuehn (2014-4-12). |
| * apps/examples/touchscreen: Add a configuration option to indicate if |
| architecture-specific initialized is required, yes or no (2014-4-14). |
| * apps/system/nxplayer/nxplayer.c: Compilation failure in one |
| configuration reported by Manuel Stuhn (2014-4-21). |
| * apps/system/sdcard: Remove an STM32 dependency. From Bob Doiron |
| (2014-4-21). |
| * apps/nshlib: malloc/free IOBUFFER for 'cat' and 'hexdump' commands |
| instead of using the stack. From Bob Doiron (2014-4-21). |
| * apps/examples/cpuhog, serialblaster, and serialrx: Stress test |
| examples added by Bob Doiron (2014-4-22). |
| * apps/examples/telnetd: Naming is confused. In someplaces 'telnetd', |
| and in others 'shell.' All changes to telnetd. Noted by Pelle |
| Windestam (2014-4-38). |
| |
| 7.3 2014-06-25 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/serialblaster: Update configuration an make logic in |
| order to select that the serial blaster task priority and stack size. |
| From Bob Doiron (2014-4-30). |
| * apps/nshlib/Kconfig and other NSH files: The alternate console device |
| CONFIG_NSH_CONDEV must not be defined unconditionally. This causes errors |
| when using Telnet sessions. This was solved by adding CONFIG_NSH_ALTCONDEV: |
| CONFIG_NSH_ALTCONDEV enables or disables the feature then, if enabled, |
| CONFIG_NSH_CONDEV provides the alternative console device name (2014-5-5). |
| * apps/system/i2c/i2c_get.c: Fix to show the updated register address on |
| each fetch (vs. showing the same starting address each time). From |
| Ryan VanSickle (2014-5-8). |
| * apps/interpreters/prun and apps/include/interpreters/prun.h: Broke out |
| the P-code execution logic from apps/examples/pashello and moved it to |
| these directory where it can be used more generally (2014-5-9). |
| * apps/system/prun and apps/include/interpreters/pexec_main.c: Move the |
| P-Code execution logic from apps/interpreters/prun to |
| apps/system/prun; Add pexec_main.c which is an NSH built-in |
| application that can be used to run P-Code programs from the NSH |
| command line (2014-5-9). |
| * Several files: Convert all old-style variadic macros to the C99 form. |
| Recent GCC changes tightens up that behavior and can cause some problems |
| (at least for the IAR compiler for some reason). See |
| https://gcc.gnu.org/onlinedocs/cpp/Variadic-Macros.html#Variadic-Macros. |
| Noted by Bob Grimes (2014-5-22). |
| * apps/system/cle: CLE was not returning the terminating newline character. |
| But reported by Max kriegleder; work-around reported by Lorenz Meier |
| (2015-5-23). |
| * Misc changes due to moving nuttx/net/uip/uip-arp.h to nuttx/net/arp.h |
| (2015-5-30). |
| * apps/examples/netpkt/: A "raw" socket test from Lazlo Sitzer |
| (2014-6-12). |
| * apps/system/hex2bin/: A library and built-in task to convert from |
| Intel HEX to binary format. Untested on initial commit (2014-6-15). |
| * apps/system/hex2bin/: Appears to be functional but testing is still |
| light (2014-6-16). |
| * apps/system/hex2bin/hex2mem_main: Add a variant application that will |
| write Intel HEX files directly to memory (2014-6-16). |
| * netutils/webserver: httpd_fs_open() should return OK on success and |
| ERROR on failure, not 1 and 0 (2014-6-23) |
| |
| 7.4 2014-08-15 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/system/mdio: PHY tool from Daniel Lazlo Sizter (2014-6-27). |
| * apps/nshlib: Networking logic modified to handler the case of SLIP |
| transport. From Max Neklyudov (2014-6-27). |
| * apps/nshlib: if # appears on line, need to comment ignore additional |
| commands on the line (2014-7-1). |
| * apps/netlib: Renamed all occurrences of uiplib to netlib. Renamed |
| files under netutils/uiplib/uip_*.c to netutils/netlib/netlib_*.c. |
| Renamed all functions defined in netutils/netlib/ to begin with netlib_, |
| instead of uip_. (2014-7-2). |
| * apps/nshlib/nsh_usbkeyboard.c: Add a configuration to use a USB |
| keyboard for the stdin device (2014-7-3). |
| * apps/neturils/webclient/webclient.c: Fix to offset calculation from |
| Rony Xln. Prevents 0x0a at the beginning of lines (2014-7-7). |
| * netutils/webserver (and other files): Fix some configuration usage: |
| CONFIG_NETUTILS_HTTPD_SENDFILE was missing from Kconfig; CONFIG_NET_HAVE_SOLINGER |
| should be CONFIG_NET_SOLINGER; Type of CONFIG_NET_HTTPD_MAXPATH was wrong |
| in Kconfig file. From Max (2014-7-11). |
| * apps/system/nxplayer/nxplayer.c: Check for file read errors and end-of-file |
| with zero bytes read (2014-7-23). |
| * apps/system/nxplayer: Misc changes to better integrate with |
| NxWM::CMediaPlayer (2014-7-23). |
| * apps/system/nxplayer/nxplayer.c and apps/include/nxplayer.h: Add hooks |
| for fast-forward and rewind needed by CMediaPlayer; add hooks for |
| equalizer settings needed by the WM8904 (2014-7-24). |
| * apps/include/nxplayer.h and apps/system/nxplayer/nxplayer.c: Changes to |
| integrate with Ken's NxWM::CMediaPlayer (2014-7-24). |
| * apps/include/nxplayer.h: Move subsampling rate definitions from nxplayer.h |
| to audio.h *2014-7-27). |
| * apps/system/nxplayer/nxplayer.c: NxPlayer needs to set curbyte field to |
| zero before enqueuing a buffer. Otherwise, it looks like beginning of |
| the buffer has already been consumed. (2014-7-27). |
| * apps/netutils/webserver/httpd.c: Missing logic to close sockets on loop |
| termination. From Max (2014-7-28). |
| * apps/system/nxplayer/nxplayer.c: Fix some error handling, update |
| comments, more debug output (2014-7-31). |
| * apps/system/nxplayer/nxplayer.c: Change how the end of the audio |
| stream is detected by the leaf audio component. This used by be done |
| by looking for the first partial buffer. That does not work with the |
| in-place sub-sampling performed by the PCM decoder: That always reduces |
| the size of the buffer so that all buffers only partially filled by the |
| time they get to the leaf. Now, a flag is set in the audio buffer |
| flags set to indicate the final buffer in the stream (2014-7-31). |
| * apps/system/nxplayer/nxplayer.c: Fix an error I introduced: Need to |
| pass through final buffer even if is it zero length because it contains |
| the end of audio stream flag (2014-8-1). |
| * apps/system/nxplayer/nxplayer.c: Break reading and enqueueing of audio |
| buffers into two steps so that errors in enqueueing can be |
| distinguished from errors in reading. Errors in enqueueing signal a |
| downstream decoder error. Add logic to gracefully recover from |
| downstream decoder errors (2014-8-5). |
| * apps/nshlib/Kconfig, nsh.h, and nsh_netinit.c: Software assigned MAC |
| address is now configurable. From Lazlo (2014-8-6). |
| * apps/nshlib/Kconfig, nsh.h, and nsh_netinit.c: Also add an option to |
| let platform-specific logic select the MAC address (2014-8-5). |
| * apps/nshlib/Kconfig, nsh.h, and nsh_netinit.c: There is now a |
| configuration option that will bring up the network on an separate |
| thread. Since the network bring-up is asynchronous, there are not |
| serial console start-up delays due to the network negotiation time |
| (2014-8-6). |
| * apps/system/sudoku: Add a sudoku game (2014-8-11). |
| |
| 7.5 2014-xx-xx Gregory Nutt <gnutt@nuttx.org> |
| |