| /**************************************************************************** |
| * examples/module/module_main.c |
| * |
| * Copyright (C) 2015, 2017-2018 Gregory Nutt. All rights reserved. |
| * Author: Gregory Nutt <gnutt@nuttx.org> |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * 3. Neither the name NuttX nor the names of its contributors may be |
| * used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
| * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
| * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
| * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED |
| * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN |
| * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| * |
| ****************************************************************************/ |
| |
| /**************************************************************************** |
| * Included Files |
| ****************************************************************************/ |
| |
| #include <nuttx/config.h> |
| #include <nuttx/compiler.h> |
| |
| #include <sys/mount.h> |
| #include <sys/stat.h> |
| |
| #include <sys/boardctl.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <unistd.h> |
| #include <fcntl.h> |
| #include <string.h> |
| #include <syslog.h> |
| #include <errno.h> |
| #include <debug.h> |
| |
| #include <nuttx/module.h> |
| #include <nuttx/symtab.h> |
| |
| #if defined(CONFIG_EXAMPLES_MODULE_ROMFS) |
| # include <nuttx/drivers/ramdisk.h> |
| # include "drivers/romfs.h" |
| #elif defined(CONFIG_EXAMPLES_MODULE_CROMFS) |
| # include "drivers/cromfs.h" |
| #endif |
| |
| /**************************************************************************** |
| * Pre-processor Definitions |
| ****************************************************************************/ |
| |
| /* Check configuration. This is not all of the configuration settings that |
| * are required -- only the more obvious. |
| */ |
| |
| #ifndef CONFIG_MODULE |
| # error "You must select CONFIG_MODULE in your configuration file" |
| #endif |
| |
| #if defined(CONFIG_EXAMPLES_MODULE_BUILTINFS) |
| # if !defined(CONFIG_FS_ROMFS) && !defined(CONFIG_FS_CROMFS) |
| # error "You must select CONFIG_FS_ROMFS or CONFIG_FS_CROMFS in your configuration file" |
| # endif |
| |
| # ifdef CONFIG_DISABLE_MOUNTPOINT |
| # error "You must not disable mountpoints via CONFIG_DISABLE_MOUNTPOINT in your configuration file" |
| # endif |
| |
| # if defined(CONFIG_EXAMPLES_MODULE_ROMFS) |
| /* Describe the ROMFS file system */ |
| |
| # define SECTORSIZE 64 |
| # define NSECTORS(b) (((b)+SECTORSIZE-1)/SECTORSIZE) |
| # define MOUNTPT "/mnt/romfs" |
| |
| # ifndef CONFIG_EXAMPLES_MODULE_DEVMINOR |
| # define CONFIG_EXAMPLES_MODULE_DEVMINOR 0 |
| # endif |
| |
| # ifndef CONFIG_EXAMPLES_MODULE_DEVPATH |
| # define CONFIG_EXAMPLES_MODULE_DEVPATH "/dev/ram0" |
| # endif |
| |
| # elif defined(CONFIG_EXAMPLES_MODULE_CROMFS) |
| /* Describe the CROMFS file system */ |
| |
| # define MOUNTPT "/mnt/cromfs" |
| # endif |
| |
| # define BINDIR MOUNTPT |
| |
| #elif defined(CONFIG_EXAMPLES_MODULE_FSMOUNT) |
| /* Describe how to auto-mount the external file system */ |
| |
| # define MOUNTPT "/mnt/" CONFIG_EXAMPLES_MODULE_FSTYPE |
| # define BINDIR MOUNTPT |
| |
| #else |
| /* Describe how to use the pre-mounted external file system */ |
| |
| # define BINDIR CONFIG_EXAMPLES_MODULE_BINDIR |
| |
| #endif /* CONFIG_EXAMPLES_MODULE_BUILTINFS */ |
| |
| /**************************************************************************** |
| * Private data |
| ****************************************************************************/ |
| |
| static const char g_write_string[] = "Hi there, installed driver\n"; |
| |
| /**************************************************************************** |
| * Symbols from Auto-Generated Code |
| ****************************************************************************/ |
| |
| #ifdef CONFIG_BUILD_FLAT |
| extern const struct symtab_s g_mod_exports[]; |
| extern const int g_mod_nexports; |
| #endif |
| |
| /**************************************************************************** |
| * Public Functions |
| ****************************************************************************/ |
| |
| /**************************************************************************** |
| * Name: module_main |
| ****************************************************************************/ |
| |
| int main(int argc, FAR char *argv[]) |
| { |
| #ifdef CONFIG_BUILD_FLAT |
| struct boardioc_symtab_s symdesc; |
| #endif |
| #if defined(CONFIG_EXAMPLES_MODULE_FSMOUNT) && \ |
| defined(CONFIG_EXAMPLES_MODULE_FSREMOVEABLE) |
| struct stat buf; |
| #endif |
| FAR void *handle; |
| char buffer[128]; |
| ssize_t nbytes; |
| int ret; |
| int fd; |
| |
| #ifdef CONFIG_BUILD_FLAT |
| /* Set the OS symbol table indirectly through the boardctl() */ |
| |
| symdesc.symtab = (FAR struct symtab_s *)g_mod_exports; |
| symdesc.nsymbols = g_mod_nexports; |
| ret = boardctl(BOARDIOC_OS_SYMTAB, (uintptr_t)&symdesc); |
| if (ret < 0) |
| { |
| fprintf(stderr, "ERROR: boardctl(BOARDIOC_OS_SYMTAB) failed: %d\n", |
| ret); |
| exit(EXIT_FAILURE); |
| } |
| #endif |
| |
| #ifdef CONFIG_EXAMPLES_MODULE_BUILTINFS |
| #if defined(CONFIG_EXAMPLES_MODULE_ROMFS) |
| /* Create a ROM disk for the ROMFS filesystem */ |
| |
| printf("main: Registering romdisk at /dev/ram%d\n", |
| CONFIG_EXAMPLES_MODULE_DEVMINOR); |
| |
| #if defined(CONFIG_BUILD_FLAT) |
| /* This example violates the portable POSIX interface by calling the OS |
| * internal function romdisk_register() (aka ramdisk_register()). We can |
| * squeak by in with this violation in the FLAT build mode, but not in |
| * other build modes. In other build modes, the following logic must be |
| * performed in the OS board initialization logic (where it really belongs |
| * anyway). |
| */ |
| |
| ret = romdisk_register(CONFIG_EXAMPLES_MODULE_DEVMINOR, |
| (FAR uint8_t *)romfs_img, |
| NSECTORS(romfs_img_len), SECTORSIZE); |
| if (ret < 0) |
| { |
| /* This will happen naturally if we registered the ROM disk previously. */ |
| |
| if (ret != -EEXIST) |
| { |
| fprintf(stderr, "ERROR: romdisk_register failed: %d\n", ret); |
| exit(EXIT_FAILURE); |
| } |
| |
| printf("main: ROM disk already registered\n"); |
| } |
| #endif |
| |
| /* Mount the file system */ |
| |
| printf("main: Mounting ROMFS filesystem at target=%s with source=%s\n", |
| MOUNTPT, CONFIG_EXAMPLES_MODULE_DEVPATH); |
| |
| ret = mount(CONFIG_EXAMPLES_MODULE_DEVPATH, MOUNTPT, "romfs", |
| MS_RDONLY, NULL); |
| if (ret < 0) |
| { |
| fprintf(stderr, "ERROR: mount(%s,%s,romfs) failed: %s\n", |
| CONFIG_EXAMPLES_MODULE_DEVPATH, MOUNTPT, strerror(errno)); |
| exit(EXIT_FAILURE); |
| } |
| |
| #elif defined(CONFIG_EXAMPLES_MODULE_CROMFS) |
| /* Mount the CROMFS file system */ |
| |
| printf("Mounting CROMFS filesystem at target=%s\n", MOUNTPT); |
| |
| ret = mount(NULL, MOUNTPT, "cromfs", MS_RDONLY, NULL); |
| if (ret < 0) |
| { |
| errmsg("ERROR: mount(%s, cromfs) failed: %d\n", MOUNTPT, errno); |
| } |
| |
| #endif /* CONFIG_EXAMPLES_MODULE_ROMFS */ |
| #else /* CONFIG_EXAMPLES_MODULE_BUILTINFS */ |
| /* An external file system is being used */ |
| |
| #if defined(CONFIG_EXAMPLES_MODULE_FSMOUNT) |
| #if defined(CONFIG_EXAMPLES_MODULE_FSREMOVEABLE) |
| /* The file system is removable, wait until the block driver is available */ |
| |
| do |
| { |
| ret = stat(CONFIG_EXAMPLES_MODULE_DEVPATH, &buf); |
| if (ret < 0) |
| { |
| int errcode = errno; |
| if (errcode == ENOENT) |
| { |
| printf("%s does not exist. Waiting...\n", |
| CONFIG_EXAMPLES_MODULE_DEVPATH); |
| sleep(1); |
| } |
| else |
| { |
| printf("ERROR: stat(%s) failed: %d Aborting...\n", |
| CONFIG_EXAMPLES_MODULE_DEVPATH, errcode); |
| exit(EXIT_FAILURE); |
| } |
| } |
| else if (!S_ISBLK(buf.st_mode)) |
| { |
| printf("ERROR: stat(%s) exists but is not a block driver: %04x\n", |
| CONFIG_EXAMPLES_MODULE_DEVPATH, buf.st_mode); |
| exit(EXIT_FAILURE); |
| } |
| } |
| while (ret < 0); |
| #endif /* CONFIG_EXAMPLES_MODULE_FSREMOVEABLE */ |
| |
| /* Mount the external file system */ |
| |
| printf("Mounting %s filesystem at target=%s\n", |
| CONFIG_EXAMPLES_MODULE_FSTYPE, MOUNTPT); |
| |
| ret = mount(CONFIG_EXAMPLES_MODULE_DEVPATH, MOUNTPT, |
| CONFIG_EXAMPLES_MODULE_FSTYPE, MS_RDONLY, NULL); |
| if (ret < 0) |
| { |
| printf("ERROR: mount(%s, %s, %s) failed: %d\n", |
| CONFIG_EXAMPLES_MODULE_DEVPATH, CONFIG_EXAMPLES_MODULE_FSTYPE, |
| MOUNTPT, errno); |
| } |
| |
| #endif /* CONFIG_EXAMPLES_MODULE_FSMOUNT */ |
| #endif /* CONFIG_EXAMPLES_MODULE_BUILTINFS */ |
| |
| /* Install the character driver */ |
| |
| handle = insmod(BINDIR "/chardev", "chardev"); |
| if (handle == NULL) |
| { |
| int errcode = errno; |
| fprintf(stderr, "ERROR: insmod(%s/chardev, chardev) failed: %d\n", |
| BINDIR, errcode); |
| exit(EXIT_FAILURE); |
| } |
| |
| /* Open the installed character driver */ |
| |
| fd = open("/dev/chardev", O_RDWR); |
| if (fd < 0) |
| { |
| int errcode = errno; |
| fprintf(stderr, "ERROR: Failed to open /dev/chardev: %d\n", errcode); |
| exit(EXIT_FAILURE); |
| } |
| |
| /* Read from the character driver */ |
| |
| nbytes = read(fd, buffer, 128); |
| if (nbytes < 0) |
| { |
| int errcode = errno; |
| fprintf(stderr, "ERROR: Read from /dev/chardev failed: %d\n", errcode); |
| close(fd); |
| exit(EXIT_FAILURE); |
| } |
| |
| printf("main: Read %d bytes: %d\n", (int)nbytes); |
| lib_dumpbuffer("main: Bytes read", (FAR const uint8_t *)buffer, nbytes); |
| |
| /* Write to the character driver */ |
| |
| nbytes = write(fd, g_write_string, strlen(g_write_string)); |
| if (nbytes < 0) |
| { |
| int errcode = errno; |
| fprintf(stderr, "ERROR: Write to /dev/chardev failed: %d\n", errcode); |
| close(fd); |
| exit(EXIT_FAILURE); |
| } |
| |
| printf("main: Wrote %d bytes: %d\n", (int)nbytes); |
| lib_dumpbuffer("main: Bytes written", (FAR const uint8_t *)g_write_string, |
| nbytes); |
| |
| close(fd); |
| ret = rmmod(handle); |
| if (ret < 0) |
| { |
| fprintf(stderr, "ERROR: rmmod failed: %d\n", ret); |
| exit(EXIT_FAILURE); |
| } |
| |
| return EXIT_SUCCESS; |
| } |