| /**************************************************************************** |
| * apps/nshlib/dbg_timcmds.c |
| * |
| * Copyright (C) 2011-2012, 2014, 2019 Gregory Nutt. All rights reserved. |
| * Author: Gregory Nutt <gnutt@nuttx.org> |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * 3. Neither the name NuttX nor the names of its contributors may be |
| * used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
| * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
| * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
| * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED |
| * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN |
| * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| * |
| ****************************************************************************/ |
| |
| /**************************************************************************** |
| * Included Files |
| ****************************************************************************/ |
| |
| #include <nuttx/config.h> |
| |
| #include <stdlib.h> |
| #include <strings.h> |
| #include <unistd.h> |
| #include <time.h> |
| |
| #include "nsh.h" |
| #include "nsh_console.h" |
| |
| /**************************************************************************** |
| * Pre-processor Definitions |
| ****************************************************************************/ |
| |
| #define MAX_TIME_STRING 80 |
| |
| #ifdef CONFIG_CLOCK_MONOTONIC |
| # define TIME_CLOCK CLOCK_MONOTONIC |
| #else |
| # define TIME_CLOCK CLOCK_REALTIME |
| #endif |
| |
| /**************************************************************************** |
| * Private Function Prototypes |
| ****************************************************************************/ |
| |
| /**************************************************************************** |
| * Private Data |
| ****************************************************************************/ |
| |
| #ifndef CONFIG_NSH_DISABLE_DATE |
| static FAR const char * const g_datemontab[] = |
| { |
| "jan", "feb", "mar", "apr", "may", "jun", |
| "jul", "aug", "sep", "oct", "nov", "dec" |
| }; |
| #endif |
| |
| /**************************************************************************** |
| * Public Data |
| ****************************************************************************/ |
| |
| /**************************************************************************** |
| * Private Functions |
| ****************************************************************************/ |
| |
| /**************************************************************************** |
| * Name: date_month |
| ****************************************************************************/ |
| |
| #ifndef CONFIG_NSH_DISABLE_DATE |
| static inline int date_month(FAR const char *abbrev) |
| { |
| int i; |
| |
| for (i = 0; i < 12; i++) |
| { |
| if (strncasecmp(g_datemontab[i], abbrev, 3) == 0) |
| { |
| return i; |
| } |
| } |
| |
| return ERROR; |
| } |
| #endif |
| |
| /**************************************************************************** |
| * Name: date_gettime |
| ****************************************************************************/ |
| |
| #ifndef CONFIG_NSH_DISABLE_DATE |
| static inline int date_showtime(FAR struct nsh_vtbl_s *vtbl, |
| FAR const char *name) |
| { |
| static const char format[] = "%a, %b %d %H:%M:%S %Y"; |
| struct timespec ts; |
| struct tm tm; |
| char timbuf[MAX_TIME_STRING]; |
| int ret; |
| |
| /* Get the current time */ |
| |
| ret = clock_gettime(CLOCK_REALTIME, &ts); |
| if (ret < 0) |
| { |
| nsh_error(vtbl, g_fmtcmdfailed, name, "clock_gettime", NSH_ERRNO); |
| return ERROR; |
| } |
| |
| /* Break the current time up into the format needed by strftime */ |
| |
| if (gmtime_r((FAR const time_t *)&ts.tv_sec, &tm) == NULL) |
| { |
| nsh_error(vtbl, g_fmtcmdfailed, name, "gmtime_r", NSH_ERRNO); |
| return ERROR; |
| } |
| |
| /* Show the current time in the requested format */ |
| |
| ret = strftime(timbuf, MAX_TIME_STRING, format, &tm); |
| if (ret < 0) |
| { |
| nsh_error(vtbl, g_fmtcmdfailed, name, "strftime", NSH_ERRNO); |
| return ERROR; |
| } |
| |
| nsh_output(vtbl, "%s\n", timbuf); |
| return OK; |
| } |
| #endif |
| |
| /**************************************************************************** |
| * Name: date_settime |
| ****************************************************************************/ |
| |
| #ifndef CONFIG_NSH_DISABLE_DATE |
| static inline int date_settime(FAR struct nsh_vtbl_s *vtbl, |
| FAR const char *name, FAR char *newtime) |
| { |
| struct timespec ts; |
| struct tm tm; |
| FAR char *token; |
| FAR char *saveptr; |
| long result; |
| int ret; |
| |
| memset(&tm, 0, sizeof(tm)); |
| |
| /* Only this date format is supported: MMM DD HH:MM:SS YYYY */ |
| |
| /* Get the month abbreviation */ |
| |
| token = strtok_r(newtime, " \t", &saveptr); |
| if (token == NULL) |
| { |
| goto errout_bad_parm; |
| } |
| |
| tm.tm_mon = date_month(token); |
| if (tm.tm_mon < 0) |
| { |
| goto errout_bad_parm; |
| } |
| |
| /* Get the day of the month. |
| * NOTE: Accepts day-of-month up to 31 for all months |
| */ |
| |
| token = strtok_r(NULL, " \t", &saveptr); |
| if (token == NULL) |
| { |
| goto errout_bad_parm; |
| } |
| |
| result = strtol(token, NULL, 10); |
| if (result < 1 || result > 31) |
| { |
| goto errout_bad_parm; |
| } |
| |
| tm.tm_mday = (int)result; |
| |
| /* Get the hours */ |
| |
| token = strtok_r(NULL, " \t:", &saveptr); |
| if (token == NULL) |
| { |
| goto errout_bad_parm; |
| } |
| |
| result = strtol(token, NULL, 10); |
| if (result < 0 || result > 23) |
| { |
| goto errout_bad_parm; |
| } |
| |
| tm.tm_hour = (int)result; |
| |
| /* Get the minutes */ |
| |
| token = strtok_r(NULL, " \t:", &saveptr); |
| if (token == NULL) |
| { |
| goto errout_bad_parm; |
| } |
| |
| result = strtol(token, NULL, 10); |
| if (result < 0 || result > 59) |
| { |
| goto errout_bad_parm; |
| } |
| |
| tm.tm_min = (int)result; |
| |
| /* Get the seconds */ |
| |
| token = strtok_r(NULL, " \t:", &saveptr); |
| if (token == NULL) |
| { |
| goto errout_bad_parm; |
| } |
| |
| result = strtol(token, NULL, 10); |
| if (result < 0 || result > 61) |
| { |
| goto errout_bad_parm; |
| } |
| |
| tm.tm_sec = (int)result; |
| |
| /* And finally the year */ |
| |
| token = strtok_r(NULL, " \t", &saveptr); |
| if (token == NULL) |
| { |
| goto errout_bad_parm; |
| } |
| |
| result = strtol(token, NULL, 10); |
| if (result < 1900 || result > 2100) |
| { |
| goto errout_bad_parm; |
| } |
| |
| tm.tm_year = (int)result - 1900; |
| |
| /* Convert this to the right form, then set the timer */ |
| |
| ts.tv_sec = mktime(&tm); |
| ts.tv_nsec = 0; |
| |
| ret = clock_settime(CLOCK_REALTIME, &ts); |
| if (ret < 0) |
| { |
| nsh_error(vtbl, g_fmtcmdfailed, name, "clock_settime", NSH_ERRNO); |
| return ERROR; |
| } |
| |
| return OK; |
| |
| errout_bad_parm: |
| nsh_error(vtbl, g_fmtarginvalid, name); |
| return ERROR; |
| } |
| #endif |
| |
| /**************************************************************************** |
| * Public Functions |
| ****************************************************************************/ |
| |
| /**************************************************************************** |
| * Name: cmd_time |
| ****************************************************************************/ |
| |
| #ifndef CONFIG_NSH_DISABLE_TIME |
| int cmd_time(FAR struct nsh_vtbl_s *vtbl, int argc, char **argv) |
| { |
| struct timespec start; |
| #ifndef CONFIG_NSH_DISABLEBG |
| bool bgsave; |
| #endif |
| #ifdef CONFIG_FILE_STREAM |
| bool redirsave; |
| #endif |
| int ret; |
| |
| /* Get the current time */ |
| |
| ret = clock_gettime(TIME_CLOCK, &start); |
| if (ret < 0) |
| { |
| nsh_error(vtbl, g_fmtcmdfailed, argv[0], "clock_gettime", NSH_ERRNO); |
| return ERROR; |
| } |
| |
| /* Save state */ |
| |
| #ifndef CONFIG_NSH_DISABLEBG |
| bgsave = vtbl->np.np_bg; |
| #endif |
| #ifdef CONFIG_FILE_STREAM |
| redirsave = vtbl->np.np_redirect; |
| #endif |
| |
| /* Execute the command */ |
| |
| ret = nsh_parse(vtbl, argv[1]); |
| if (ret >= 0) |
| { |
| struct timespec end; |
| struct timespec diff; |
| |
| /* Get and print the elapsed time */ |
| |
| ret = clock_gettime(TIME_CLOCK, &end); |
| if (ret < 0) |
| { |
| nsh_error(vtbl, g_fmtcmdfailed, |
| argv[0], "clock_gettime", NSH_ERRNO); |
| ret = ERROR; |
| } |
| else |
| { |
| diff.tv_sec = end.tv_sec - start.tv_sec; |
| if (start.tv_nsec > end.tv_nsec) |
| { |
| diff.tv_sec--; |
| end.tv_nsec += 1000000000; |
| } |
| |
| diff.tv_nsec = end.tv_nsec - start.tv_nsec; |
| nsh_output(vtbl, "\n%lu.%04lu sec\n", (unsigned long)diff.tv_sec, |
| (unsigned long)diff.tv_nsec / 100000); |
| } |
| } |
| |
| /* Restore state */ |
| |
| #ifndef CONFIG_NSH_DISABLEBG |
| vtbl->np.np_bg = bgsave; |
| #endif |
| #ifdef CONFIG_FILE_STREAM |
| vtbl->np.np_redirect = redirsave; |
| #endif |
| |
| return ret; |
| } |
| #endif |
| |
| /**************************************************************************** |
| * Name: cmd_date |
| ****************************************************************************/ |
| |
| #ifndef CONFIG_NSH_DISABLE_DATE |
| int cmd_date(FAR struct nsh_vtbl_s *vtbl, int argc, char **argv) |
| { |
| FAR char *newtime = NULL; |
| FAR const char *errfmt; |
| int option; |
| int ret; |
| |
| /* Get the date options: date [-s time] [+FORMAT] */ |
| |
| while ((option = getopt(argc, argv, "s:")) != ERROR) |
| { |
| if (option == 's') |
| { |
| /* We will be setting the time */ |
| |
| newtime = optarg; |
| } |
| else /* option = '?' */ |
| { |
| errfmt = g_fmtarginvalid; |
| goto errout; |
| } |
| } |
| |
| /* optind < argc-1 means that there are additional, unexpected arguments on |
| * th command-line |
| */ |
| |
| if (optind < argc) |
| { |
| errfmt = g_fmttoomanyargs; |
| goto errout; |
| } |
| |
| /* Display or set the time */ |
| |
| if (newtime) |
| { |
| ret = date_settime(vtbl, argv[0], newtime); |
| } |
| else |
| { |
| ret = date_showtime(vtbl, argv[0]); |
| } |
| |
| return ret; |
| |
| errout: |
| nsh_error(vtbl, errfmt, argv[0]); |
| return ERROR; |
| } |
| #endif |