| 5.19 2011-03-12 Gregory Nutt <gnutt@nuttx.org> |
| |
| * Initial version of the apps/ directory was released as contributed by |
| Uros Platise. |
| |
| 6.0 2011-03-21 Gregory Nutt <gnutt@nuttx.org> |
| |
| * README.txt -- README cosmetics |
| * hello/ -- hello world minor changes |
| * Makefile -- Makefile cosmetics (I am slowly adding the Darjeeling JVM) |
| * Make.defs -- New file adds common make definitions for applications. |
| * hello/Makefile -- Now uses new Make.defs definitions. Added README.txt. |
| * apps/poweroff -- New application to turn off board power. |
| * Moved NSH library, netutils, and examples from the nuttx/ directory to |
| the apps/ directory |
| * Moved exec_nuttapp machinery into the nuttapp/ directory. |
| |
| 6.1 2011-04-10 Gregory Nutt <gnutt@nuttx.org> |
| |
| * Creation of auto-generated header files now occurs during the context |
| build phase. |
| * Added sdcard insert and eject, nsh command '?' and some code remarks |
| * Renamed nuttapp to namedapp |
| * namedapp/binfs.c -- Create a tiny filesystem that can be used |
| to show the internal named apps under /bin. |
| * Numerous fixes to build system required to support building with native |
| Windows toolchain. |
| |
| 6.2 2011-05-06 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/nxffs: Add a test a a configuration that will be used to |
| verify NXFFS. |
| |
| 6.3 2011-05-15 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/interpreter: Add a directory to hold interpreters. The Pascal add- |
| on module now installs and builds under this directory. |
| * apps/interpreter/ficl: Added logic to build Ficl (the "Forth Inspired |
| Command Language"). See http://ficl.sourceforge.net/. |
| * apps/netutils/dhcpc, dhcpcd, and tftp. If these directories are included |
| in the configuration but CONFIG_NET_UDP is disable (which is not very wise), |
| then a make error occurs because tools/mkdep.sh is called with no files. |
| * system/free: Move Uros' custom free command from vsn/free |
| * system/install: Add a new install command submitted by Uros Platise. |
| * examples/rgmp. Add a placeholder for an RGMP build example. |
| RGMP is a project for running GPOS and RTOS simultaneously on |
| multi-processor platforms. See http://rgmp.sourceforge.net/wiki/index.php/Main_Page |
| for further information about RGMP. NOTE: This is an empty example |
| on initial check-in. |
| |
| 6.4 2011-06-06 Gregory Nutt <gnutt@nuttx.org> |
| |
| * nshlib/nsh_netcmds.c: If a network device name and IP address are provided |
| with the ifconfig command, then this command will now set the network address. |
| (Contributed by Yu Qiang). |
| * netutils/ftpc: A library to support client-side FTP. |
| * examples/ftpc: A simple add-on to the NSH. From NSH, you can start |
| this simple FTP shell to transfer files to/from a remote FTP server. |
| |
| 6.5 2011-06-21 Gregory Nutt <gnutt@nuttx.org> |
| |
| * netutils/ftpc: Simpflication and size reduction. |
| |
| 6.6 2011-07-11 Gregory Nutt <gnutt@nuttx.org> |
| |
| * Make.defs, namedapp/namedapp.c: Several structural changes made to get a |
| clean compile under the ez80 ZDS-II toolchain (no design changes). |
| * apps/examples/buttons: Add a test for the new standardized button interfaces |
| * apps/examples/nxtext: Add another NX graphics test. This one focus on |
| placing text on the background while pop-up windows occur. Text should |
| continue to update normally with or without the popup windows present. |
| |
| 6.7 2011-08-02 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/nx and nxtext: These examples can now be built as NSH |
| "built-in" commands. |
| * apps/examples/nxhello: The simplest graphics example: It just says |
| "Hello, World!" in the center of the display. This example can also be |
| built as an NSH "built-in" command. |
| * apps/examples/nx, ntext, and nxhello: All updated to use the new |
| NuttX font interfaces. |
| * apps/examples/nximage: Another super simple graphics example: It just puts |
| the NuttX logo in the center of the display. This example can also be |
| built as an NSH "built-in" command. |
| * apps/examples/usbstorage: Can now be built as two NSH "built-in" commands: |
| 'msconn' will connect the USB mass storage device; 'msdis' will disconnect |
| the USB storage device. |
| * apps/examples/nx*: All NX header files moved from nuttx/include/nuttx to |
| nuttx/include/nuttx/nx. |
| * apps/examples/usbstorage: Added instrumentation to monitor memory usage |
| to check for memory leaks in the USB storage driver. |
| * apps/examples/nxhello/nxhello_bkgd.c: Fix handling of allocated glyph |
| memory. |
| |
| 6.8 2011-08-11 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/nxlines: Added a test for NX line drawing capabilities. |
| |
| 6.9 2011-09-11 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/nxlines: Extend the line drawing text to include drawing |
| of circles. |
| * apps/system/i2c: Add an I2C test tool that should help to bring up I2C |
| devices (when it is fully functional). |
| * apps/nshlib/nsh_timcmds.c: Add the date command that can be used to |
| show or set the time (only if CONFIG_RTC is set). |
| |
| 6.10 2011-10-06 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/system/i2c: Add repitition and address auto-incrementing so that |
| and command can be executed numerous times. Add a new verify command |
| that will write to a register, read from register, and verify that |
| returned value. |
| * apps/graphics/tiff: Add a library that can be used to create TIFF files. |
| * apps/examples/tiff: Add a unit test for the TIFF file creation logic |
| * apps/examples/lcdrw: Add a test to verify if you can or can or read |
| data from an LCD correctly. |
| * apps/examples/usbterm: A USB terminal example.. more of a USB chat or |
| serial bridge: Data received on local console echoed via USB serial; |
| data received on USB serial is echoed on the local console. |
| * apps/examples/touchscreen: Add a simple, generic test for any |
| touschscreen driver. |
| * Makefile: The apps/ Makefile now checks for an apps/external directory |
| or symbolic link. If such a directory/link exists (and has a Makefile), |
| it will be added to the apps/ build. This allows external directories |
| to be included into the apps/ build by simply creating a symbolic link. |
| |
| 6.11 2011-11-12 Gregory Nutt <gnutt@nuttx.org> |
| |
| (No major changes from 6.10) |
| |
| 6.12 2011-12-06 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/buttons: The button test can now be executed as an NSH |
| built in command. |
| |
| 6.13 2012-12-26 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/dhcpd: May now be built as an NSH built-in application |
| by setting CONFIG_NSH_BUILTIN_APPS. |
| * apps/netutils/dhcpd/dhcpd.c: Fix several problems using host order address |
| where network addresses expected (and vice versa). |
| * apps/examples/nettest: May now be built as an NSH built-in application |
| by setting CONFIG_NSH_BUILTIN_APPS. |
| * apps/examples/nettest: Correct some build issues with the nettest is |
| built for performance evaluation. |
| * apps/examples/adc: Add a very simple test to drive and test an ADC |
| driver. |
| * apps/examples/pwm: Add an NSH PWM command to drive and test a PWM |
| driver. |
| * apps/examples/can: Add an NSH CAN command to drive and test a CAN |
| driver in loopback mode. |
| |
| 6.14 2012-01-15 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/buttons/main.c: The test needs to call up_buttoninit() to |
| properly configure the button interrupt GPIOs. |
| * apps/examples/pwm: Add support to test the pulse count option recently |
| added to the PWM interface. |
| |
| 6.15 2012-02-12 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/nshlib/nsh_serial.c and nsh_usbdev.c: If NuttX is configured to use |
| a USB serial console, then NSH needs to wait until the USB console is |
| connected and available. |
| * apps/examples/composite: Add a test of the USB composite device. |
| * apps/examples/Telnetd: Move the tiny uIP shell example from |
| netutils/Telnetd to examples/Telnetd. Enhanced the Telnetd daemon so that |
| it supports Telnetd via a TTY device driver: A new TTY device driver is |
| created when each new Telnet connection is created. The shell thread |
| is started with stdin, stdout, and stderr mapped to the TTY device. |
| * netutils/Telnetd: The old uIP Telnet demo is gone. In its place is a new |
| Telnet infrastructure. The new Telnet daemon creates sessions that are |
| "wrapped" as character devices and mapped to stdin, stdout, and stderr. |
| Now the Telnet session can be inherited by spawned tasks. |
| * examples/Telnetd: Add a test for the new Telnet daemon. |
| * examples/Telnetd/telnetd_driver.c: Move the internal socket structure from |
| the daemon's socket array into the driver's state data so that it will be |
| independent from the Telnetd daemon. |
| * apps/system/readline: Moved the old nuttx/lib/stdio/lib_fgets.c here |
| and renamed it as readline(). The old fgets was simplied and the overloaded |
| readline functionality was removed. |
| * apps/netutils/ftpd: Add an FTPD server (does not even compile on initial |
| checkin). |
| * apps/examples/ftpd: Add a test for the FTPD server (untest on initial |
| check-in). |
| * apps/nshlib/nsh_fscmds.c: Add support for a 'dmesg' command that will |
| dump the system log if CONFIG_SYSLOG is selected. |
| |
| 6.16 2012-03-10 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/qencoder: Add a quadrature driver test. |
| * apps/examples/ostest/fpu.c: Add a test to verify that FPU registers |
| are properly saved and restored on context switches. |
| * apps/system/readline/readline.c: readline() will now treat either a |
| backspace or a DEL character as a backspace (i.e., deleting the character |
| to the left of the cursor). This makes NSH less dependent on particular |
| keyboard mappings of the Backspace key. Submitted by Mike Smith. |
| * apps/system/cdcacm: An example that illustrates how the CDC/ACM driver |
| may to connected and disconnected through software control. |
| * apps/examples/nsh/nsh_main.c: If available, call up_cxxinitialize() to |
| initialize all statically defined C++ classes. |
| * apps/nshlib: Now supports a USB serial device for NSH console I/O. This |
| allows NSH to be used on boards that have USB but no serial connectors. |
| |
| 6.17 2012-04-14 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/can: Add conditional compilation so that the test can be |
| configured to only send messages or to only receive messages. This will |
| let the test work in other modes than simple loopback testing. |
| * apps/examples/hello and apps/examples/ostest: Can now be built as NSH |
| built-int functions. |
| * vsn/hello: Removed. The modified apps/examples/hello is enough "Hello, |
| World!" |
| * apps/examples/nxconsole: Add a test of the NX console device. |
| * apps/examples/nxconsole: The NX console example now supports running |
| the NuttShell (NSH) within an NX window. |
| * apps/system/readline: Now uses standard definitions from |
| include/nuttx/ascii.h and vt100.h |
| * Kconfig, */Kconfig: Added skeleton Kconfig files to all directories that |
| may need them. |
| |
| 6.18 2012-05-19 Gregory Nutt <gnutt@nuttx.org> |
| |
| * Kconfig: Continued Kconfig file updates (no longer tracking on a per-file |
| basis in the ChangeLog) |
| * apps/examples/watchdog: Add a watchdog timer example. |
| * apps/examples/tiff: Fix wrong path used for temporary file. |
| * apps/examples/touchscreen: Standardize the board-specific, touchscreen |
| initialization interfaces. |
| |
| 6.19 2012-06-15 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/nshlib/nsh_usbdev.c: Add the capability to use an arbitrary USB |
| device as the console (not necessarily /dev/console). This is a useful |
| option because then you can still use the serial console to debug with. |
| * apps/nshlib/nsh_usbdev.c: User now has to press ENTER 3 times before |
| USB console will start. Otherwise, the USB console starts before there |
| is anyone at the other end to listen. |
| * apps/nshlib/nsh_usbdev.c and nsh_consolemain.c: Add support for the USB |
| capability when a USB console is used. |
| * apps/nshlib/nsh_fscmds.c: Add the 'mv' command |
| |
| 6.20 2012-07-12 Gregory Nutt <gnutt@nuttx.org> |
| |
| * namedapp/exec_namedapp.c - Correct an error when round robin scheduling |
| is enabled. The priority of the new, named application was erroneously |
| being set to the priority of the parent thread; losing its configured |
| priority. Reported by Mike Smith. |
| |
| 6.21 2012-08-25 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/include/: Stylistic clean-up of all header files. |
| * apps/modbus and apps/include/modbus: A port of freemodbus-v1.5.0 |
| has been added to the NuttX apps/ source tree. |
| * apps/examples/modbus: A port of the freemodbus-v1.5.0 "demo" |
| program that will be used to verify the FreeModBus port |
| * apps/modbus: Don't use strerror(). It is just too big. |
| * apps/modbus: Add CONFIG_MB_TERMIOS. If the driver doesn't support |
| termios ioctls, then don't bother trying to configure the baud, parity |
| etc. |
| * apps/nshlib: If waitpid() is supported, then NSH now catches the |
| return value from spawned applications (provided by Mike Smith) |
| * apps/nshlib: Lock the scheduler while starting built-in applications |
| in order to eliminate race conditions (also from Mike Smith). |
| * apps/examples/adc, pwm, and qencoder: Add support for testing |
| devices with multiple ADC, PWM, and QE devices. |
| * apps/nshlib/nsh_mntcmds.c: Separated mount-related commands out of |
| nsh_fscmds.c. Extended to the mount command so that if no arguments |
| are provided, then the current mountpoints are enumerated. |
| * apps/nshlib/nsh_mntcmds.c: Add an NSH df command to list the |
| properties of mounted file systems. |
| * apps/nshlib/nsh_parse.c: Extend help command options. 'help' with |
| no arguments outputs a short list of commands. With -v lists all |
| command line details. A command name can be added to just get |
| help on one command. |
| * system/readline.c: If character input/output is interrupted by a |
| signal, then readline() will try the read/write again. |
| * apps/*/Make.defs: Numerous fixes needed to use the automated |
| configuration (from Richard Cochran). |
| |
| 6.22 2012-09-29 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/netutils/thttpd/thttpd_cgi.c: Missing NULL in argv[] |
| list (contributed by Kate). |
| * apps/nshlib/nsh_parse.c: CONFIG_NSH_DISABLE_WGET not CONFIG_NSH_DISABLE_GET |
| in one location (found by Kate). |
| * apps/examples/ostest/prioinherit.c: Limit the number of test |
| threads to no more than 3 of each priority. Bad things happen |
| when the existing logic tried to created several hundred test |
| treads! |
| * apps/nshlib/nsh.h: Both CONFIG_LIBC_STRERROR and CONFIG_NSH_STRERROR |
| must be defined to use strerror() with NSH. |
| * apps/examples/*/*_main.c, system/i2c/i2c_main.c, and others: Added |
| configuration variable CONFIG_USER_ENTRYPOINT that may be used to change |
| the default entry from user_start to some other symbol. Contributed by |
| Kate. |
| * apps/netutils/webserver/httpd/c: Fix a typo that as introduced in |
| version r4402: 'lese' instead of 'else' (Noted by Max Holtzberg). |
| * tools/mkfsdata.pl: The uIP web server CGI image making perl script was |
| moved from apps/netutils/webserver/makefsdata to nuttx/tools/mkfsdata.pl |
| (Part of a larger change submitted by Max Holtzberg). |
| * apps/netutils/webserver, apps/examples/uip, and apps/include/netutils/httpd.h: |
| The "canned" version of the uIP web servers content that was at |
| netutils/webserver/httpd_fsdata.c has been replaced with a dynamically |
| built configuration located at apps/examples/uip (Contributed by |
| Max Holtzberg). |
| * apps/netutils/webserver: Several inenhancements from Kate including the |
| ability to elide scripting and SERVER headers and the ability to map |
| files into memory before transferring them. |
| * apps/netutils/webserver: Add ability to map a URL to CGI function. |
| Contributed by Kate. |
| * apps/nshlib/nsh_mntcmds.c: The changes of 6.21 introduced holes in the |
| error handling: Now the number of arguments to mount can be 0 or 4. |
| Additional parameter checking is required to prevent mysterious errors |
| (submiteed by Kate). |
| * apps/netutils/webserver/httpd_mmap.c: Fix errors when the mmap() |
| length is zero (submitted by Kate). |
| * apps/netutils/webserver/httpd_sendfile.c: Add and option, |
| CONFIG_NETUTILS_HTTPD_SENDFILE to transfer files using the NuttX |
| sendfile() interface. |
| * apps/netutils/discover: A UDP network discovery utility contributed |
| by Max Holtzberg. |
| * apps/examples/discover: A test example for the UDP network discovery |
| utility (also contribed by Max Holtzberg). |
| * apps/examples/*/main.c: Too many files called main.c. Each renamed |
| to something unique so that they will not collide in the archive. |
| * apps/netutils/xmlrpc: The Embeddable Lightweight XML-RPC Server |
| discussed at http://www.drdobbs.com/web-development/\ |
| an-embeddable-lightweight-xml-rpc-server/184405364. Contributed by |
| Max Holtzberg. |
| * apps/netutils/uip_listenon.c: Logic in uip_server.c that creates |
| the listening socket was moved to this new file to support re-use. |
| Contributed by Kate. |
| * apps/netutils/webserver/httpd.c: The option CONFIG_NETUTILS_HTTPD_SINGLECONNECT |
| can now be used to limit the server to a single thread. Option |
| CONFIG_NETUTILS_HTTPD_TIMEOUT can be used to generate HTTP 408 errors. |
| Both from Kate. |
| * apps/netutils/webserver/httpd.c: Improvements to HTTP parser from |
| Kate. |
| * apps/netutils/webserver/httpd.c: Add support for Keep-alive connections |
| (from Kate). |
| * apps/NxWidget/Kconfig: This is a kludge. I created this NxWidgets |
| directory that ONLY contains Kconfig. NxWidgets does not live in |
| either the nuttx/ or the apps/ source trees. This kludge makes it |
| possible to configure NxWidgets/NxWM without too much trouble (with |
| the tradeoff being a kind ugly structure and some maintenance issues). |
| * apps/examples/Make.defs: Missing support for apps/examples/watchdog. |
| * apps/NxWidgets/Kconfig: Add option to turn on the memory monitor |
| feature of the NxWidgets/NxWM unit tests. |
| |
| 6.23 2012-11-05 Gregory Nutt <gnutt@nuttx.org> |
| |
| * vsn: Moved all NSH commands from vsn/ to system/. Deleted the vsn/ |
| directory. |
| * Makefile: Change order of includes when CONFIG_NEWCONFIG=y. In |
| that case, namedapp must be included first so that the namedapp |
| context is established first. If the namedapp context is established |
| later, it will overwrite any existing namedapp_list.h and nameapp_proto.h |
| files. |
| * CONFIG_EXAMPLES_*: To make things consistent, changed all occurrences |
| of CONFIG_EXAMPLE_* to CONFIG_EXAMPLES_*. |
| * Kconfig: Fleshed out apps/examples/adc/Kconfig and apps/examples/wget/Kconfig. |
| There are still a LOT of empty, stub Kconfig files. |
| * Kconfig: Fleshed out apps/examples/buttons/Kconfig. There are still a LOT |
| of empty, stub Kconfig files. |
| * apps/netutils/webserver/httpd.c: Fix a bug that I introduced in |
| recent check-ins (Darcy Gong). |
| * apps/netutils/webclient/webclient.c: Fix another but that I introduced |
| when I was trying to add correct handling for loss of connection (Darcy Gong) |
| * apps/nshlib/nsh_telnetd.c: Add support for login to Telnet session via |
| username and password (Darcy Gong). |
| * apps/netutils/resolv/resolv.c (and files using the DNS resolver): Various |
| DNS address resolution improvements from Darcy Gong. |
| * apps/nshlib/nsh_netcmds.c: The ping command now passes a maximum round |
| trip time to uip_icmpping(). This allows pinging of hosts on complex |
| networks where the ICMP ECHO round trip time may exceed the ping interval. |
| * apps/examples/nxtext/nxtext_main.c: Fix bad conditional compilation |
| when CONFIG_NX_KBD is not defined. Submitted by Petteri Aimonen. |
| * apps/examples/nximage/nximage_main.c: Add a 5 second delay after the |
| NX logo is presented so that there is time for the image to be verified. |
| Suggested by Petteri Aimonen. |
| * apps/Makefile: Small change that reduces the number of shell invocations |
| by one (Mike Smith). |
| * apps/examples/elf: Test example for the ELF loader. |
| * apps/examples/elf: The ELF module test example appears fully functional. |
| * apps/netutils/json: Add a snapshot of the cJSON project. Contributed by |
| Darcy Gong. |
| * apps/examples/json: Test example for cJSON from Darcy Gong |
| * apps/nshlib/nsh_netinit.c: Fix static IP DNS problem (Darcy Gong) |
| * apps/netutils/resolv/resolv.c: DNS fixes from Darcy Gong. |
| * COPYING: Licensing information added. |
| * apps/netutils/codec and include/netutils/urldecode.h, base64.h, and md5.h: |
| A port of the BASE46, MD5 and URL CODEC library from Darcy Gong. |
| * nsnlib/nsh_codeccmd.c: NSH commands to use the CODEC library. |
| Contributed by Darcy Gong. |
| * apps/examples/wgetjson: Test example contributed by Darcy Gong |
| * apps/examples/cxxtest: A test for the uClibc++ library provided by |
| Qiang Yu and the RGMP team. |
| * apps/netutils/webclient, apps/netutils.codes, and apps/examples/wgetjson: |
| Add support for wget POST interface. Contributed by Darcy Gong. |
| * apps/examples/relays: A relay example contributed by Darcy Gong. |
| * apps/nshlib/nsh_netcmds: Add ifup and ifdown commands (from Darcy |
| Gong). |
| * apps/nshlib/nsh_netcmds: Extend the ifconfig command so that it |
| supports setting IP addresses, network masks, name server addresses, |
| and hardware address (from Darcy Gong). |
| |
| 6.24 2012-12-20 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/ostest/roundrobin.c: Replace large tables with |
| algorithmic prime number generation. This allows the roundrobin |
| test to run on platforms with minimal SRAM (Freddie Chopin). |
| * apps/nshlib/nsh_dbgcmds.c: Add hexdump command to dump the contents |
| of a file (or character device) to the console Contributed by Petteri |
| Aimonen. |
| * apps/examples/modbus: Fixes from Freddie Chopin |
| * apps/examples/modbus/Kconfig: Kconfig logic for FreeModBus contributed |
| by Freddie Chopin. |
| * Makefile, */Makefile: Various fixes for Windows native build. Now uses |
| make foreach loops instead of shell loops. |
| * apps/examples/elf/test/*/Makefile: OSX doesn't support install -D, use |
| mkdir -p then install without the -D. From Mike Smith. |
| * apps/examples/relays/Makefile: Reduced stack requirement (Darcy Gong). |
| * apps/nshlib and apps/netutils/dhcpc: Extend the NSH ifconfig command plus |
| various DHCPC improvements(Darcy Gong). |
| * apps/nshlib/nsh_apps.c: Fix compilation errors when CONFIG_NSH_DISABLEBG=y. |
| From Freddie Chopin. |
| * Rename CONFIG_PCODE and CONFIG_FICL as CONFIG_INTERPRETERS_PCODE and |
| CONFIG_INTERPRETERS_FICL for consistency with other configuration naming. |
| * apps/examples/keypadtest: A keypad test example contributed by Denis |
| Carikli. |
| * apps/examples/elf and nxflat: If CONFIG_BINFMT_EXEPATH is defined, these |
| tests will now use a relative path to the program and expect the binfmt/ |
| logic to find the absolute path to the program using the PATH variable. |
| |
| 6.25 2013-02-01 Gregory Nutt <gnutt@nuttx.org> |
| |
| * Makefiles: Removed dependency of distclean on clean in most top-level |
| files. It makes sense for 'leaf' Makefiles to have this dependency, |
| but it does not make sense for upper-level Makefiles. |
| * apps/namedapp/: Renamed to builtins in preparation for another change. |
| * .context: Removed the .context kludge. This caused lots of problems |
| when changing configurations because there is no easy way to get the |
| system to rebuild the context. Now, the context will be rebuilt |
| whenever there is a change in either .config or the Makefile. |
| * apps/builtin/registry: Updated new built-in registration logic to handle |
| cases where (1) old apps/.config is used, and (2) applications ared |
| removed, not just added. |
| * apps/examples/nettest/Makefile: Fix an error that crept in during |
| some of the recent, massive build system changes. |
| * apps/builtin/Makefile: Need to have auto-generated header files |
| in place early in the dependency generation phase to avoid warnings. |
| It is not important if they are only stubbed out header files at |
| this build phase. |
| * apps/examples/hidbkd: Now supports decoding of encoded special keys |
| if CONFIG_EXAMPLES_HIDKBD_ENCODED is defined. |
| * apps/examples/hidbkd: Add support for decoding key release events |
| as well. However, the USB HID keyboard drier has not yet been |
| updated to detect key release events. That is kind of tricky in |
| the USB HID keyboard report data. |
| * apps/examples/wlan: Remove non-functional example. |
| * apps/examples/ostest/vfork.c: Added a test of vfork(). |
| * apps/exampes/posix_spawn: Added a test of posix_spawn(). |
| * apps/examples/ostest: Extend signal handler test to catch |
| death-of-child signals (SIGCHLD). |
| * apps/examples/ostest/waitpid.c: Add a test for waitpid(), waitid(), |
| and wait(). |
| * builtin/binfs.c: Add hooks for dup() method (not implemented). |
| * builtin/exec_builtin.c, nshlib/nsh_parse.c, and nshlib/nsh_builtin.c: |
| NSH now supports re-direction of I/O to files (but still not from). |
| * builtin/binfs.c: Greatly simplified (it is going to need to be |
| very lightweight). Now supports open, close, and a new ioctl to recover |
| the builtin filename. The latter will be needed to support a binfs |
| binfmt. |
| * builtin/binfs.c: Move apps/builtin/binfs.c to fs/binfs/fs_binfs.c |
| CONFIG_APPS_BINDIR rename CONFIG_FS_BINFS |
| * apps/include/builtin.h: Some of the content of |
| apps/include/apps.h moved to include/nuttx/binfmt/builtin.h. |
| apps/include/apps.h renamed builtin.h |
| * apps/builtin/exec_builtins.c: Move builtin |
| utility functions from apps/builtin/exec_builtins.c to |
| binfmt/libbuiltin/libbuiltin_utils.c |
| * apps/nshlib/nsh_mountcmds.c: The block driver/source |
| argument is now optional. Many files systems do not need |
| a source and it is really stupid to have to enter a bogus |
| source parameter. |
| * apps/nshlib/nsh_fileapp.c: Add the ability to execute a file |
| from a file system using posix_spawn(). |
| * apps/builtin/: Extensions from Mike Smith. |
| * apps/examples/ftpd/Makefile: Name ftpd_start is not the name of |
| the entrypoint. Should be ftpd_main (from Yan T.) |
| * apps/netutils/telnetd/telnetd_driver: Was stuck in a loop if |
| recv[from]() ever returned a value <= 0. |
| * apps/examples/nettest and poll: Complete Kconfig files. |
| * apps/examples/ostest/waitpid.c: Need to use WEXITSTATUS() |
| to decode the correct exit status. |
| * apps/system/usbmonitor: A daemon that can be used to monitor USB |
| trace outpout. |
| * apps/nshlib/nsh_usbdev.c, nsh_consolemain.c, nsh_session.c, nsh_script.c: |
| Add support for a login script. The init.d/rcS script will be executed |
| once when NSH starts; the .nshrc script will be executed for each session: |
| Once for serial, once for each USB connection, once for each Telnet |
| session. |
| * apps/system/readline: Correct readline() return value. Was not |
| any returning special values when end-of-file or read errors |
| occur (it would return an empty string which is not very useful). |
| |
| 6.26 2013-03-15 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/builtin/exec_builtin.c: Now uses task_spawn() to start |
| builtin applications. |
| * Type of argv has changed from const char ** to char * const * |
| * apps/nshlib/nsh_parse.c: Fix memory lead: Need to detach after |
| creating a pthread. |
| * apps/examples and nshlib: Change name of _TCB to struct tcb_s to |
| match NuttX name change. |
| * apps/examples/ostest/restart.c: Add a test case to verify |
| task_restart(). |
| * apps/system/readline.c: readline() now returns EOF on any failure |
| (instead of a negated errno value). This is because the underlying |
| read is based on logic similar to getc. The value zero was being |
| confused with a NUL. So if a NUL was received, the NSH session |
| would terminate because it thought it was the end of file. |
| |
| 6.27 2013-04-28 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/system/ramtest: Add a simple memory test (2013-03-26). |
| * apps/examples/ostest: In the non-cancelable thread test, we need |
| to give the thread an opportunity to run and to set the non- |
| cancelable state. |
| * apps/nshlib/nsh_ddcmd.c: Correct the test of the skip input |
| parameter. Was limiting the range to <= count. From Ken |
| Pettit (2014-4-24). |
| |
| 6.28 2013-06-14 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/mtdpart: Provides a simple test of MTD partitions. |
| * apps/nshlib/nsh_mntcmds.c: Add a -h option to the df command to show |
| the volume information in human readable form (Ken Pettit, 2013-4-30). |
| * apps/nshlib/nsh_fscmds.c: Add support for the mksmartfs command. |
| (Ken Pettit, 2013-4-30). |
| * apps/system/flash_eraseall: Add an interface to erase FLASH using a |
| flash_eraseall NSH command (Ken Pettit, 2013-5-1). |
| * apps/examples/flash_test and apps/examples/smart_test: Add tests of |
| the SMART block driver and file system (Ken Pettit, 2013-5-1). |
| * apps/examples/mtdpart: Extended the test. The original test |
| coverage was superficial (2013-5-3). |
| * apps/examples/smart: This is an adaptation of the NXFFS stress |
| test for the SMART file system (Ken Pettit, 2013-5-3). |
| * apps/examplex/nxtext: Remove the CONFIG_EXAMPLES_NXTEXT_NOGETRUN |
| option. The test logic was bad for the case where this options |
| is not selected. Also, complete the empty Kconfig file (2013-5-7). |
| * apps/NxWidgets/Kconfig: Updated to match NxWidgets/Kconfig by |
| Ken Pettit (2013-5-11). |
| * apps/examples/helloxx: C++ name mangling was occurring when this |
| example is built as an NSH built-in application. (2013-5-16). |
| * apps/netutils/discover: Added a runtime configuration for the |
| UDP discover utility. From Max Holtzberg (2013-5-21). |
| * apps/examples/tcpecho: Added a simple single threaded, poll based |
| TCP echo server based on W. Richard Stevens UNIX Network Programming |
| Book. Contributed by Max Holtzberg (2013-5-22). |
| * apps/examples/slcd: Add an example for testing alphanumeric, |
| segment LCDs (2013-5-24). |
| * apps/examples/slcd: Extend SLCD test to handle multi-line displays |
| (2013-5-26). |
| * apps/examples/slcd: This test now sets the SLCD brightness level to |
| the mid-point as part of its initialization (2013-5-27). |
| * .gitignore: Clean-up of most all .gitignore files: Make scope of |
| ignore to be only the current directory; Ignore .dSYM files in |
| directories where .exe's may be build. Also, in Makefiles, |
| clean .dSYM files in directories where .exe may be built (2013-5-30). |
| * apps/examples/nrf35l01_term: Add an example application to demo the |
| nRF24L01 driver. From Laurent Latil (2013-6-1). |
| * apps/nshlib/Kconfig: Add some missing NSH configuration values. |
| From Lorenz Meier (2013-6-2). |
| * Standardize on CONFIG_NSH_BUILTIN_APPS. Remove all other variants |
| of the build-as-an-NSH-application configuration settings |
| (2013-6-12). |
| |
| 6.29 2013-07-31 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/nsh, cxxtest, and helloxx: C++ initializers should be |
| set once and, preferably, in the context of the task that uses any C++ |
| statically initialized classes. These only becomes an issue if cxxtest |
| or helloxx are built as NSH builtin applications. Then you want the |
| initialization done in cxxtext or helloxx and not in NSH (and certainly |
| not twice). Added configuration options to control who does the C++ |
| initialization. NSH now does not do C++ initialization be default and |
| must be configured to do otherwise. Converely, cxxtest and helloxx |
| will do C++ initialization unless configured do otherwise (2013-6-21). |
| * apps/examples/cxxtext: Add ostream test as provided by Michael |
| (2013-6-21). |
| * apps/examples/nxhello: Minor fix for compilation error when the |
| display resolution is low (< 8bpp) due to a typo that has been there |
| for a long time (2013-6-23). |
| * apps/examplex/nxhello: Correct default colors when in Y1 code mode. |
| (2013-6-24). |
| * apps/system/Make.defs and Kconfig: The RAM test was not correctly built |
| into the configuration and build system (2013-6-26). |
| * apps/examples/composite/composite_main.c: SourceForge But Ticket #19. |
| Change to prevent some false alarm debug assertions (From Chia Cheng |
| Tao, 2013-7-9). |
| * apps/system/zmodem: Add configuration support and a build framework |
| for the Zmodem sz and rz command (which exist but have not yet been |
| checked in) (2013-7-12). |
| * apps/system/zmodem: The 'sz' command is now complete and seems |
| functional (given on light testing). The rz command logic exists but |
| is still untested and not yet checked in (2013-7-13). |
| * apps/system/zmodem: The 'rz' command is now complete and functional |
| under certain conditaions. There are, however, some data overrun |
| issues that I am still uncertain how should be handled (2012-7-15). |
| * apps/system/zmodem/Makefile.host and host/: The Zmodem utilities |
| can now be built to execute on a Linux host. |
| * apps/nshlib/nsh_fscmds.c: Add a 'cmp' command that can be used to |
| compare two files for equivalence. Returns an indication if the files |
| differ. Contributed by Andrew Tridgell (via Lorenz Meier) (2013-7-18). |
| |
| 6.30 2013-09-14 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/composite/: SourceForge bug #19: Fix a typo that can |
| cause a configuration error. From CCTSAO (2013-9-4). |
| * apps/examples/cc3000. Initial support for the TI CC3000 network module |
| on the Freescale Freedom-KL25Z board from Alan Carvalho de Assis. |
| Includes the test to verify the CC3000 (2013-9-3). |
| * apps/examples/usbmsc: apps/examples/usbstorage renamed usbmsc. |
| Change submitted by CCTSAO (2013-6-5). |
| * apps/examples/pwm: Clean-up some configuration confusion (2013-9-5). |
| * apps/netutils/dhcpd/dhcpd.c: Fix calculation of the next lease |
| address. SourceForge bug #21 from Paolo Messina (2013-9-6). |
| * apps/examples/usbmsc: Don't try to control USB trace if we are |
| an NSH built-in task. In that case our attempts are inadequate |
| and only interfere with with other logic that is attempting to |
| to do the same thing (in NSH or in the USB monitor) (2013-9-6). |
| * apps/examples/usbmsc: IMPORTANT bug fix: Change how the msconn |
| works. Because of recent changes the msconn command was hanging. |
| This was because the USB MSC start-up logic creates a pthread; |
| Now waitpid() will wait until all members of the task group |
| exit. So NSH was hanging in waitpid when msconn started even |
| though msconn returned. The USB MSC logic really should not use |
| a pthread, but we are stuck with that for now. The work-around |
| is that msconn now daemonizes itself so that it so that the pthread |
| is created in a different task group (2013-9-7). |
| * apps/system/usbmonitor: The USB monitor has been extended so |
| that it can be used with USB device or host trace data (2013-9-9). |
| * apps/nshlib/nsh_fscmds.c: Fix NSH listing output for the case |
| of a single file. Provided by Lorenz Meier (2013-9-13). |
| |
| 6.31 2013-10-28 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/nshlib/nsh_netcmds.c: Remove a warning when DHCP is not |
| enabled (2013-9-17). |
| * apps/nshlib/Kconfig: Default IP address should be 0x0a000001 |
| (10.0.0.1), not 0xa0000001 (160.0.0.1). Ditto for the gateway |
| (2013-9017). |
| * apps/examples/ostest/Kconfig: Add configuration options for |
| the FPU test. There are still many OS test configuration |
| options that do not appear in Kconfig (2013-9-18). |
| * apps/examples/cc3000: Condition the CC3000 example on having |
| selected the CC3000 device. Otherwise, you are prompted for |
| this option on each 'make oldconfig' (2013-9-18). |
| * apps/system/usbmonitor/usbmonitor.c: Fix some bad conditional |
| compilation probably introduced on 2013-9-9 (2013-9-23). |
| * apps/system/stackmonitor: Add a daemon that can be used to |
| monitor stack usage by all threads (2013-9-24). |
| * system/usbmsc: Move examples/usbmsc to system/usbmsc (2013-9-25). |
| * system/cdcacm: Move examples/cdcacm to system/cdcacm (2013-9-25). |
| * system/composite: Move examples/composite to system/composite |
| (2013-9-25). |
| * apps/nshlib and apps/readline: Numerous changes to get NSH |
| working with no file system. Basically this suppresses I/O |
| redirection and replaces file I/O with calls to low-level |
| console read/write functions. Suggested by Alan Carvalho de Assis |
| in a somewhat different form. (2013-9-30). |
| * apps/nshlib/nsm_routecmds.c: Add addroute and delroute |
| commands (2013-10-5). |
| * apps/system/i2ctool/Kconfig: Fix default I2C frequency: 400KHz |
| instead of 4MHz. Suggested by Max Kriegleder (2013-10-10). |
| * apps/system/info/Kconfig and Makefile: Increase stack size. |
| Ken Pettit reports that this simple command can exceed its 768 |
| stack size under certain conditions. The size is marginal and |
| has been increased to 1024 by default but is also now configurable |
| (2013-10-14). |
| * apps/Makefile: Need to include external/Make.defs if we want |
| allow external applications to participate in the NuttX |
| configuration. Suggested by gdi@embedders.org (2013-10-14). |
| * apps/examples/cc3300: Updates as part of larger re-organizaion |
| of CC3000 logic by David Sidrane (2013-10-16). |
| * apps/examples/random: Add a simple test that dumps values from |
| /dev/random (2013-10-20). |
| * apps/examples/cc3000: Extensions and enhancements from David |
| Sidrane (2013-10-23). |
| * apps/netutils/telnetd/telnetd_driver.c: Missing argument to |
| debug statement can cause crashes in certain error conditions. |
| From David Sidrane (2013-10-24). |
| * apps/examples/cc3000: Updates from David Sidrane. Plus |
| some kruft removal (2013-10-24). |
| * apps/examples/can/can_main.c: Correct an error in a debug |
| statement. From Martin Lederhilger (2013-10-24). |
| * apps/examples/adc: Add support so that a ADC driven by |
| software triggering can be tested (2013-10-25). |
| * apps/examples/cc3000: Updates from David Sidrane (2013-10-25). |
| * apps/system/nxplayer: Implements a command line media |
| player. From Ken Pettit (2013-10-27). |
| * apps/system/nxplayer: Add logic to verify the audio sub-format. |
| From Ken Pettit (2013-10-28). |
| |
| 6.32 2013-12-07 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/platform: A new home for board-specific application code |
| (2013-10-30). |
| * apps/include/platform/configdata.h: Define an interface that can be |
| used to manage platform-specific storage of configuration data |
| (2013-10-30). |
| * apps/examples/cc3000: Fine tuning of memory usage from David Sidrane |
| (2013-10-30). |
| * apps/platform/mikroe-stm32f4: Now supports storage of configuration |
| data. From Ken Pettit (2013-10-30). |
| * apps/nshlib/nsh_dbgcmds.c and others: Add skip= and count= |
| options to the hexdump command. From Ken Pettit (2013-11-1). |
| * apps/platform/mikroe-stm32f4: Now uses /dev/config for configuration |
| data storage. From Ken Pettit (2013-11-1). |
| * apps/platform/Makefile: Was not dealing with the bin sub-directory |
| correctly (2013-11-2). |
| * apps/examples/configdata: A unit test for the MTD configuration |
| data driver from Ken Pettit (2013-11-4). |
| * apps/platform/mikroe-stm32f4: Updated to use new MTD configuration |
| driver features. From Ken Pettit (2013-11-1). |
| * apps/nshlib/nsh.h: Allow USB trace without a USB console. From |
| David Sidrane (2013-11-06). |
| * apps/system/composite/composite_main.c: The wrong handle was getting |
| nullified. From David Sidrane (2013-11-7). |
| * apps/system/nxplayer: Play thread stack size is now configurable. All |
| NxPlayer threads now have names assigned via pthread_setname_np(). |
| From Ken Pettit (2013-11-10). |
| * apps/examples/i2schar: The beginning of an I2S test based on the I2S |
| character driver (2013-11-10). |
| * apps/nshlib/nsh_mntcmds.c: Mount command updates from Ken Pettit |
| (2013-11-17). |
| * apps/examples/hidkbd/hidkbd_main.c: Now calls a function named |
| arch_usbhost_initialize() that must be provided by the platform- |
| specific code (2013-11-29). |
| * apps/nshlib/nsh_fscmds.c: Add an option to the mkfatfs command to |
| specify FAT12, FAT16, or FAT32 (2013-12-5). |
| |
| 6.33 2014-01-30 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/nshlib/nsh_mntcmds.c: Modified the df -h logic to eliminate |
| truncating numbers in conversion (like 7900 -> 7M). From Ken |
| Pettit (2013-12-12). |
| * Moved configs/stm3240g-eval/src/up_cxxinitialize.c to |
| apps/platform/stm3240g-eval/up_cxxinitialize.c: Now it is available |
| in user-space in the kernel mode build (2013-12-29). |
| * apps/examples/mount/Kconfig: Fill in empty Kconfig file (2013-12-31). |
| * builtin/Makefile: Fixes for native Windows build from Max Holtzberg |
| (2014-1-4). |
| * apps/netutils/dhcpc/Kconfig, resolv/Kconfig, telnetd/Kconfig, and |
| apps/nshlib/Kconfig: Refactor some configuration dependencies: NSH |
| features should depend on netutil selections; netutil selections |
| should depend on networking selections. (2014-1-9). |
| * apps/nshlib/nsh_command.c: Separate NSH command handling from NSH |
| line parsing. This re-partitioning simplifies the logic and will |
| enable some things to come (2014-1-10). |
| * apps/nshlib/nsh_parse.c: Will now support multiple commands on a |
| command line, each separated with a semi-colon (2014-1-10). |
| * apps/nshlib/nsh_parse.c: Put the logic that executes a command |
| after parsing parameters into a separate file so that it can be |
| reused (2014-1-10). |
| * apps/nshlib/nsh_parse.c: Add initial support of commands enclosed |
| in back quotes as command arguments. Functionality still incomplete |
| on initial commit (2014-1-10). |
| * Logic to support commands enclosed in back quotes is functional |
| but not thoroughly tested (2014-1-11). |
| * apps/nshlib/nsh_parse.c: Can now handle arguments that are |
| concatenations of constant strings, command return data, application |
| return data, and environment variables (2014-1-11). |
| * apps/nshlib/nsh_parse.c: Fix a memory leak ... forgot to close |
| a temporary file (2013-1-12). |
| * apps/system/inifile: A simple INI file parser (perhaps too simple). |
| This is code that I wrote a long time ago and have used many time but |
| is untested in its current incarnation (2014-1-15). |
| * aps/nshlib/nsh_parse.c: Recent changes broke redirection of output |
| (2014-1-14). |
| * apps/nshlib/nsh_parse.c: Add true and false commands (2014-1-17) |
| * apps/nshlib/nsh.h and nsh_parse.c: Re-name and re-organize some |
| if-then-else related structures to better support forthcoming until |
| and while loops (2014-1-17). |
| * apps/nshlib/nsh_script.c: Now saves the FILE stream for the script |
| file in the vtbl structure so that it can be accessed by forthcoming |
| while and until logic (2014-1-17). |
| * apps/nshlib/nsh.h, nsh_command.c, nsh_parse.c, and nsh_script.c: Add |
| support for while-do-done and until-do-done loops. These only work |
| when executing a script file because they depend on the ability to seek |
| in the file to implement the looping behaviors (2014-1-17). |
| * apps/nshlib/nsh_parse.c: Loosen up if-then-else-fi syntax to allow |
| a command to be on the same line as the then and else tokens like: |
| "if true; then echo true; else echo false; fi". Much more like bash! |
| (2014-1-17). |
| * apps/nshlib/Kconfig, README.txt, nsh.h, nsh_command.c, and |
| nsh_script.c: Add an option to conditionally compile out support for |
| loop and for if-then-else-fi sequence (2014-1-17). |
| * apps/nshlib/nsh.h, nsh_command.c, and nsh_parse.c: Add a break |
| command that can be executed with a loop to terminate the loop |
| immediately (2014-1-17). |
| * apps/system/vi: Add support for a tiny, VI work-alike editor. This |
| is still very much a work-in-progress on initial check-in (2014-1-20). |
| * apps/netutils/uiplib: Support new definitions and state passing for |
| network device status. From Maz Holtzberg (2014-1-21). |
| * apps/system/vi: Tiny VI is basically functional. All commands seem |
| to work. There are still some display artifacts and probably several |
| untested conditions (2014-1-21). |
| |
| 7.1 2014-03-15 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/system/cle: Add a EMACS-like command line editor. This CLE, |
| is really more like readline than the NuttX readline is! (2014-02-02). |
| * apps/nshlib: Use of the standard tiny readline (about .25KB) is now |
| an option and can be replaces with the EMACX-like CLE (about 2KB) |
| (2014-02-02). |
| * Several changes to restore Windows native build (2014-2-7) |
| * apps/examples/touchscreen: Can now be configured to work with a mouse |
| interface as well (2014-2-10). |
| * Several files changes based on complaints from the tool CppCheck. Some |
| latent bugs were fixed (and most likely some new typos were introduced) |
| (2014-2-10). |
| * apps/examples/nximage/Kconfig and apps/examples/uip/Kconfig: Incomplete |
| Kconfig files fleshed out by Alan Carvalho de Assis (2014-2-18). |
| * apps/nshlib: 'rmdir' can now be used in the pseudo-filesystem. Hence, |
| the command needs to be available even if there are no write-able |
| filesystem enabled (2014-2-19). |
| * apps/nshlib: 'mkdir' can now be used in the pseudo-filesystem. Hence, |
| the command needs to be available even if there are no write-able |
| filesystem enabled (2014-2-19). |
| * apps/nshlib: 'mv' can now be used in the pseudo-filesystem. Hence, |
| the 'mv' command needs to be available even if there are no write-able |
| filesystem enabled (2014-2-19). |
| * apps/nshlib: 'rm' can now be used to remove nodes from the pseudo- |
| filesystem. Hence, the 'rm' command needs to be available even if there |
| are no write-able filesystem enabled (2014-2-20). |
| * CONFIG_DISABLE_PSEUDOFS_OPERATIONS: This new configuration setting |
| basically backs out the recent changes to mv, rm, mkdir, and rmdir |
| (2014-2-20). |
| * nshlib/Kconfig: Use CONFIG_DEFAULT_SMALL in selecting default |
| settings (2014-2-20). |
| * nshlib/nsh_telnetd.c: Use strncpy vs strcpy to avoid overruning the |
| username and password buffers. From Bertold Van den Bergh (2014-2-22). |
| * nshlib/Kconfig, nsh_proccmds.c: If the CPU load feature and the procfs |
| features are enabled, then show CPU load used by each thread in the |
| 'ps' command (2014-2-27). |
| * nshlib/nsh_fscmds.c: Add a newline after printing the file in the |
| 'cat' command. This prevents the NSH prompt from be in the same line |
| as the final line of the file in the case where there is no newline |
| at the end of the file (2014-2-27). |
| * netutils/dhcpd/dhcpd.c: allocipaddr() should not call ntohl(), the |
| returned IP address is already in host order. |
| * apps/netutils/dhcpd/Kconfig: Add missing DHCPD configuration |
| settings(2014-3-3). |
| * Support for the legacy configuration mechanism (using appconfig files) |
| is removed. Only the newer configuration using the kconfig-frontends |
| tools is now supported (2014-3-6). |
| |
| 7.2 2014-04-29 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/nshlib/nsh_parse.c: Fix NuttShell version number display in |
| welcome message. version.h was not being included (2014-3-23). |
| * apps/examples/igmp: Fill out Kconfig file; update makefile so |
| that the IGMP example can be used as an NSH built-in application. |
| From Manuel Stühn (2014-3-24). |
| * apps/system/usbmsc: Back out the USBMSC daemon... it is no longer |
| needed with the recent fix to the USBMSC class driver (2014-3-25). |
| * apps/examples/lcdrw: Fill out empty Kconfig file (2014-2-27). |
| * apps/netutils/dhcpd/dhcpd.c: The correct value of the PAD option |
| is zero, not one. From Brennan Ashton (2014-3-31). |
| * apps/sysinfo: CONFIG_VERSION_BUILD is a string an needs to be |
| printed with %s, not %d. Noted by Librae (2014-4-8). |
| * apps/netutils/ntpclient/ and apps/include/netufils/ntpclient.h: Add |
| a very primitive NTP client. The initial check-in is untested and |
| probably incomplete (2014-4-10). |
| * apps/netutils/resolv: Long needed major clean up for coding style |
| and unification of naming conventions (resolv vs dns) (2014-4-11). |
| * apps/netutils/dnsclient and include/netutils/dnsclient.h: File name |
| changes that are part of the overal resolv->dns renaming (2014-4-11). |
| * apps/netutils/dnsclient: Break the one big monolithic file into |
| three smaller files (2014-4-11). |
| * apps/netutils/ntpclient/ntpclient.c: Corrections to the NTP client |
| from Manuel Stuehn (2014-4-12). |
| * apps/examples/touchscreen: Add a configuration option to indicate if |
| architecture-specific initialized is required, yes or no (2014-4-14). |
| * apps/system/nxplayer/nxplayer.c: Compilation failure in one |
| configuration reported by Manuel Stuhn (2014-4-21). |
| * apps/system/sdcard: Remove an STM32 dependency. From Bob Doiron |
| (2014-4-21). |
| * apps/nshlib: malloc/free IOBUFFER for 'cat' and 'hexdump' commands |
| instead of using the stack. From Bob Doiron (2014-4-21). |
| * apps/examples/cpuhog, serialblaster, and serialrx: Stress test |
| examples added by Bob Doiron (2014-4-22). |
| * apps/examples/telnetd: Naming is confused. In someplaces 'telnetd', |
| and in others 'shell.' All changes to telnetd. Noted by Pelle |
| Windestam (2014-4-38). |
| |
| 7.3 2014-06-25 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/serialblaster: Update configuration an make logic in |
| order to select that the serial blaster task priority and stack size. |
| From Bob Doiron (2014-4-30). |
| * apps/nshlib/Kconfig and other NSH files: The alternate console device |
| CONFIG_NSH_CONDEV must not be defined unconditionally. This causes errors |
| when using Telnet sessions. This was solved by adding CONFIG_NSH_ALTCONDEV: |
| CONFIG_NSH_ALTCONDEV enables or disables the feature then, if enabled, |
| CONFIG_NSH_CONDEV provides the alternative console device name (2014-5-5). |
| * apps/system/i2c/i2c_get.c: Fix to show the updated register address on |
| each fetch (vs. showing the same starting address each time). From |
| Ryan VanSickle (2014-5-8). |
| * apps/interpreters/prun and apps/include/interpreters/prun.h: Broke out |
| the P-code execution logic from apps/examples/pashello and moved it to |
| these directory where it can be used more generally (2014-5-9). |
| * apps/system/prun and apps/include/interpreters/pexec_main.c: Move the |
| P-Code execution logic from apps/interpreters/prun to |
| apps/system/prun; Add pexec_main.c which is an NSH built-in |
| application that can be used to run P-Code programs from the NSH |
| command line (2014-5-9). |
| * Several files: Convert all old-style variadic macros to the C99 form. |
| Recent GCC changes tightens up that behavior and can cause some problems |
| (at least for the IAR compiler for some reason). See |
| https://gcc.gnu.org/onlinedocs/cpp/Variadic-Macros.html#Variadic-Macros. |
| Noted by Bob Grimes (2014-5-22). |
| * apps/system/cle: CLE was not returning the terminating newline character. |
| But reported by Max kriegleder; work-around reported by Lorenz Meier |
| (2015-5-23). |
| * Misc changes due to moving nuttx/net/uip/uip-arp.h to nuttx/net/arp.h |
| (2015-5-30). |
| * apps/examples/netpkt/: A "raw" socket test from Lazlo Sitzer |
| (2014-6-12). |
| * apps/system/hex2bin/: A library and built-in task to convert from |
| Intel HEX to binary format. Untested on initial commit (2014-6-15). |
| * apps/system/hex2bin/: Appears to be functional but testing is still |
| light (2014-6-16). |
| * apps/system/hex2bin/hex2mem_main: Add a variant application that will |
| write Intel HEX files directly to memory (2014-6-16). |
| * netutils/webserver: httpd_fs_open() should return OK on success and |
| ERROR on failure, not 1 and 0 (2014-6-23) |
| |
| 7.4 2014-08-15 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/system/mdio: PHY tool from Daniel Lazlo Sizter (2014-6-27). |
| * apps/nshlib: Networking logic modified to handler the case of SLIP |
| transport. From Max Neklyudov (2014-6-27). |
| * apps/nshlib: if # appears on line, need to comment ignore additional |
| commands on the line (2014-7-1). |
| * apps/netlib: Renamed all occurrences of uiplib to netlib. Renamed |
| files under netutils/uiplib/uip_*.c to netutils/netlib/netlib_*.c. |
| Renamed all functions defined in netutils/netlib/ to begin with netlib_, |
| instead of uip_. (2014-7-2). |
| * apps/nshlib/nsh_usbkeyboard.c: Add a configuration to use a USB |
| keyboard for the stdin device (2014-7-3). |
| * apps/neturils/webclient/webclient.c: Fix to offset calculation from |
| Rony Xln. Prevents 0x0a at the beginning of lines (2014-7-7). |
| * netutils/webserver (and other files): Fix some configuration usage: |
| CONFIG_NETUTILS_HTTPD_SENDFILE was missing from Kconfig; CONFIG_NET_HAVE_SOLINGER |
| should be CONFIG_NET_SOLINGER; Type of CONFIG_NET_HTTPD_MAXPATH was wrong |
| in Kconfig file. From Max (2014-7-11). |
| * apps/system/nxplayer/nxplayer.c: Check for file read errors and end-of-file |
| with zero bytes read (2014-7-23). |
| * apps/system/nxplayer: Misc changes to better integrate with |
| NxWM::CMediaPlayer (2014-7-23). |
| * apps/system/nxplayer/nxplayer.c and apps/include/nxplayer.h: Add hooks |
| for fast-forward and rewind needed by CMediaPlayer; add hooks for |
| equalizer settings needed by the WM8904 (2014-7-24). |
| * apps/include/nxplayer.h and apps/system/nxplayer/nxplayer.c: Changes to |
| integrate with Ken's NxWM::CMediaPlayer (2014-7-24). |
| * apps/include/nxplayer.h: Move subsampling rate definitions from nxplayer.h |
| to audio.h *2014-7-27). |
| * apps/system/nxplayer/nxplayer.c: NxPlayer needs to set curbyte field to |
| zero before enqueuing a buffer. Otherwise, it looks like beginning of |
| the buffer has already been consumed. (2014-7-27). |
| * apps/netutils/webserver/httpd.c: Missing logic to close sockets on loop |
| termination. From Max (2014-7-28). |
| * apps/system/nxplayer/nxplayer.c: Fix some error handling, update |
| comments, more debug output (2014-7-31). |
| * apps/system/nxplayer/nxplayer.c: Change how the end of the audio |
| stream is detected by the leaf audio component. This used by be done |
| by looking for the first partial buffer. That does not work with the |
| in-place sub-sampling performed by the PCM decoder: That always reduces |
| the size of the buffer so that all buffers only partially filled by the |
| time they get to the leaf. Now, a flag is set in the audio buffer |
| flags set to indicate the final buffer in the stream (2014-7-31). |
| * apps/system/nxplayer/nxplayer.c: Fix an error I introduced: Need to |
| pass through final buffer even if is it zero length because it contains |
| the end of audio stream flag (2014-8-1). |
| * apps/system/nxplayer/nxplayer.c: Break reading and enqueueing of audio |
| buffers into two steps so that errors in enqueueing can be |
| distinguished from errors in reading. Errors in enqueueing signal a |
| downstream decoder error. Add logic to gracefully recover from |
| downstream decoder errors (2014-8-5). |
| * apps/nshlib/Kconfig, nsh.h, and nsh_netinit.c: Software assigned MAC |
| address is now configurable. From Lazlo (2014-8-6). |
| * apps/nshlib/Kconfig, nsh.h, and nsh_netinit.c: Also add an option to |
| let platform-specific logic select the MAC address (2014-8-5). |
| * apps/nshlib/Kconfig, nsh.h, and nsh_netinit.c: There is now a |
| configuration option that will bring up the network on an separate |
| thread. Since the network bring-up is asynchronous, there are not |
| serial console start-up delays due to the network negotiation time |
| (2014-8-6). |
| * apps/system/sudoku: Add a sudoku game (2014-8-11). |
| |
| 7.5 2014-09-28 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/nshlib/Kconfig, nsh.h, and nsh_netinit.c: Extend the NSH network |
| initialization logic. There is now an option that will create a |
| network monitor thread that will monitor the state of the link. When |
| the link goes down, the code will attempt to gracefully put the |
| Ethernet driver in a down state; When the link comes back, the code |
| will attempt to bring the network back up (2014-8-17). |
| * apps/system/free/free.c and install/install.c: STM32 FLASH fixes: |
| use size_t instead of uint16_t, make interface more generic. From |
| Freddie Chopin (2014-8-28). |
| * apps/examples/elf: The ELF test/example has been extended so the |
| individual ELF test programs can link against the SYSCALL library |
| (if it is available) or against the C library to eliminate or |
| minimize the need for symbol tables (2014-8-29). |
| * apps/nshlib/nsh_proccmds.c: Fix NSH PS command: If there are no |
| arguments, it would print garbage for argument list (2014-9-1). |
| * apps/import/, apps/tools/, apps/Makefile: Beginning of logic that |
| will, hopefully, allow me to build applications against a NuttX export |
| package (vs. the nuttx/ source tree) (2014-9-4). |
| * apps/tools/mkimport.sh and apps/import/Makefile: Add .config file to |
| export package (2014-9-5). |
| * apps/Makefile: Add a 'make import' target. More is needed before |
| it will be usable (2014-9-5). |
| * apps/import/Make.defs and .gitignore: Added mostly empty Make.defs |
| file. Something like this will be bee needed for the 'make import' |
| build (2014-9-5). |
| * apps/Makefile, examples/elf/Kconfig, and import/Make.defs: Copy more |
| logic from nuttx/tools/Config.mk into the Make.defs file (2014-9-5). |
| * apps/import/Make.defs: Also need to define CFLAGS (2015-9-5) |
| * apps/import/scripts/gnu-elf.ld: Add GCC linker script for ELF |
| import builds (2014-9-5). |
| * All Makefiles: Add an install target to all makefiles. For the |
| import build, the top-level Makefile now does two passes: (1) builds |
| libapp.a, then (2) installs the programs (not yet finished) (2014-9-6). |
| * Many files: With kernel build (CONFIG_BUILD_KERNEL), entry point to |
| all tasks is main, not some xyz_main (2014-9-6). |
| * Many Makefiles: Add program installation for CONFIG_BUILD_KERNEL in |
| all Makefiles that build a main() (2014-9-6). |
| * Many Makefiles. For kernel build, the object file containing main |
| cannot go into library because of name collisions. The object file |
| must be handled as a special case in every Makefile (2014-9-7). |
| * apps/import/Make.defs: libapps.a needs to be added to the list of |
| libraries to link against (2014-9-7). |
| * apps/nshlib/nsh.h and nsh_ddcmd.c: Several commands must be disabled |
| in the kernel build because they depend on interfaces that are not |
| available outside of the kernel: dd, df, losetup, mkfatfs, mkdr, and |
| ps (2014-9-7). |
| * apps/import/Make.defs: ELF build requires -fno-common in CFLAGS |
| (2014-9-8). |
| * apps/tools/mkromfsimg.sh: Add a script to create a BOOT ROMFS |
| filesystem image (2014-9-9). |
| * Many makefiles: All makefiles that have separated the MAINOBJ |
| need to include MAINOBJ in list of C objects to be compiled. |
| SourceForge tick #31 from Aton (2014-9-11). |
| * apps/examples/elf/tests/Makefile and nxflat/tests/Makefile: Do |
| not build test cases that use task_create if there is an address |
| environment (2014-9-14). |
| * apps/examples/null/null_main.c: Need to include config.h it order know |
| if this is or is not a kernel build (2014-9-16). |
| * Change all occurrences of NxConsole to NxTerm (2014-9-20). |
| * apps/examples/Konfig, Makefile, README.txt and all of mdrwb/: Add an |
| example to test MTD R/W buffering (2014-9-25). |
| * apps/examples/ostest: Add a trivial test of sem_timedwait (2014-9-16). |
| |
| 7.6 2014-11-26 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/ostest: Add a simple test of named semaphores |
| (2014-9-23). |
| * apps/netutils/webclient/Kconfig and webclient.c: Add implementation of |
| timeouts for the apps/netutils/webclient. From Brennan Ashton |
| * apps/nshlib/Kconfig and nsh_romfsetc.c: Add support for a custom NSH |
| ROMFS startup image header file location. From Martin Lederhilger |
| (2014-9-30). |
| * apps/nshlib/nsh_fscmds.c: Fix ls -l output for regular files (14-9-30). |
| * apps/nshlib/nsh_ddcmd.c: Fix reversed in/out file closing when an |
| error occurs. From Ken Pettit (2014-10-2). |
| * apps/examples/ostest/aio.c, Kconfig, Makefile, and ostest_main.c: Add |
| AIO test case in OS test (2014-10-5). |
| * apps/examples and system: Remove non-portable uses of syslog |
| (014-10-8). |
| * apps/: Correct everything under apps to use the corrected syslog |
| interfaces (2014-10-8). |
| * apps/netutils/netlib/netlib_gethostaddr.c: Fix memcpy of host address |
| in netlib_gethostaddr(). From Brennan Ashton (2014-10-17). |
| * apps/system/stackmonitor.c and stackmonitor/Makefile: Fix compile |
| problems introduced when the syslog() prototype changed; Also update |
| Makefile for kernel build From Radoslaw Adamczyk (2014-10-23). |
| * apps/examples/nxterm/Makefile: Update makefile for kernel-build |
| issues. From Radoslaw Adamczyk (2014-10-23). |
| * apps/examples/keypadtest/keypadtest_main.c: Fixes to keypadtest from |
| Pierre-Noel Bouteville (2014-10-23). |
| * apps/nshlib/nsh_parse.c, nsh.h, and Kconfig: Move CONFIG_NSH_TMPDIR |
| to CONFIG_LIBC_TMPDIR (2014-11-05). |
| * apps/interpreter/bas: Merged in the Michael Haardt's BAS 2.4 adapted |
| for use by NuttX by Alan Carvalho de Assis. The bas24 branch was merged |
| into the master branch on this date (2014-11-7). |
| * apps/examples/bastest: This is a special version of Michael |
| Haardt's BAS 2.4 test files adapted for use by NuttX on a ROMFS file |
| system (2014-11-7). |
| * apps/interpreter/bas: Add VT100 support for color command (2014-11-10). |
| * nshlib/: Remove use of CONFIG_MAX_TASKS in ps command and in range |
| checkout (2014-11-13). |
| * netutils/thttpd: Remove use of CONFIG_MAX_TASKS in in 'task' CGI |
| example (2014-11-13). |
| * sysm/i2c: Remove use of CONFIG_MAX_TASKS for maximum argument I2C |
| tool size (2014-11-13). |
| * apps/netutils/dnsclient/dns_socket.c: Right now if you make a DNS |
| request before the dns address it set you will get an assertion. The |
| state of the IP setting is not something the application should be |
| aware of, it should only be concerned with whether or not the name |
| was resolved. From Brennan Ashton (2014-11-13). |
| * apps/nshlib/, apps/netutils, and apps/include/netutils: Misc |
| changes to support multiple networks with different link layers. For |
| example, ETHERNET + SLIP (2014-11-15). |
| * apps/nshlib/nsh_usbconsole.c: Add logic to restart the console wait |
| if an error occurs while reading from the console.In USB console |
| startup, the logic must be able to open the USB serial and receive 3 |
| newlines. However, it the USB driver is disconnected or otherwise |
| fails before the 3 newlines are received, the receive loop becomes a |
| killer, infinite loop, CPU hog. Noted by spasbyspas (2014-11-16). |
| * examples/, netutils/, nshlib/, various files: Rename |
| CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU; Add CONFIG_NET_SLIP_MTU. |
| Modify logic to handle different MTUs when both Ethernet and SLIP |
| are enabled (2014-11-16). |
| * apps/examples/discover, tcpecho, webserver, xmlrpc: These examples |
| all set the IP address of eth1 but the netmask and gateway of eth0 |
| if DHCP is enabled. That can't be right???? (2014-11-17). |
| * apps/examples/bridge: Add a simple UDP relay bridge for testing |
| configurations with multiple networks. Initial checkin is not |
| very usuable because it lacks a host-side test driver for the |
| bridge (2014-11-17). |
| * apps/netutils/codecs/md5.c: Fix md5 hashing when digest[$i] lower |
| that 16. From Sergey (2015-11-20). |
| * apps/examples/bridge/host_main.c, host_net1.c, host_net2.c, Kconfig, |
| and Makefile: Add host-side test driver (2014-11-21). |
| |
| 7.7 2015-01-26 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/romfs/Makefile: fix romfs example builtin app registry |
| issue. From Librae (2014-11-27). |
| * apps/examples/djoystick and support files: Add a test of the discrete |
| joystick driver (2014-11-28). |
| * apps/examples/ajoystick and support files: Add a test of the analog |
| joystick driver (2014-12-03). |
| * apps/nshlib/nsh_netcmds.c: NSH TFTP get command: Wrong file namei |
| used for the destination. From Lazlo (2014-12-10). |
| * apps/system/cu: Add a minimalist implementation of the 'cu' terminal |
| program (part of Taylor UUCP for ages). Using it, you can simply open |
| a serial port and interact with it. Using '~.' you can leave the |
| terminal program and drop back to nsh. This might come in handy for |
| people that have e.g. GSM modems, GPS receivers or other devices with |
| text based serial communications attached to their Nuttx systems. From |
| Harald Welte (2014-12-13). |
| * apps/examples/ltdc and build-related file: Add ltdc test example. From |
| Marco Krahl (2014-12-19). |
| * apps/system/cdcacm, composite and usbmsc: Fix some strangely placed |
| conditional compilation. Looks like an automated update gone awry |
| (2014-12-28). |
| * apps/examples/ltdc/ltdc_main.c: Clean up documentation, some formatting |
| improvements. From Marco Krahl (2014-12-29). |
| * apps/system/lm75 and build-related files: Add a tiny application to |
| read the temperature from an LM-75 (or compatible) temperature sensor |
| (2015-01-06). |
| * apps/interpreters/micropython: A port of Micro Python to NuttX. |
| Contributed by Dave Marples (2015-01-11). |
| * apps/examples/timer: Add a trivial test of the timer driver |
| (2015-01-13). |
| * apps/netutils/dnsclient: Can select to be either IPv4 or IPv6, but |
| not both (IPv6 still does not compile) (2015-01-18). |
| * apps/netutils/netlib: Add new library functions to manipulate IPv6 |
| addresses (2015-01-13). |
| * apps/nshlib/Kconfig and nsh_netinit.c: Add logic to initialize |
| IPv6 addresses (2015-01-19). |
| * apps/netutils/netlib: All IOCTLs must use a valid address family -- |
| even if the address family does not matter such as when getting the |
| MAC address or the network flags (2015-01-19). |
| * apps/examples/nettest: Update test so that it can be used to test |
| IPv6 TCP sockets (2015-01-20). |
| * Many files: Correct name of fields in struct sockaddr_in6: sin6_port |
| and sin6_family, not sin_port and sin_family (2015-01-20). |
| * apps/netutils/telnetd: Add protection when CONFIG_SCHED_HAVE_PARENT |
| is enabled: Call sigaction with SA_NOCLDWAIT so that exit status is |
| not retained (no zombies) and block receipt of SIGCHLD so that accept |
| is not awakened by a signal. If accept() is awakened by a signal, do |
| not do anything crazy like exit. Most from Rony Xln (2015-01-22). |
| * apps/examples/udp: The UDP test example has been extend to support |
| IPv6 domain sockets (2015-01-22). |
| * apps/nshlib: Add the ping6 command to support checking IPv6 networks. |
| (2015-01-23). |
| * apps/nsh: Clean up network status presentation for IPv6 (2015-01-24). |
| |
| 7.8 2015-02-11 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/interpreters/micropython: Add math library defines for nan(), |
| copysign(), and trunc() functions. From Brennan Ashton (2015-01-26). |
| * apps/examples/ustream: Add a simple test of Unix domain sockets |
| (2015-01-27). |
| * apps/examples/udgram: Add a simple test of Unix domain datagram |
| sockets (2015-01-28) |
| * apps/Makefile and builtin/Makefile: Fix for building with parallel |
| make. Build-server sometimes failed 'make -j24' with errors in the |
| builtin line or or sometimes silently succeeds but generated builds |
| that contain a random subset of configured NuttX applications. There |
| are two root causes for this: (1) Recipes for building builtin_list.h |
| and builtin_proto.h are not linearizable, and (2) Nothing ensures |
| that 'make context' is run first for apps/builtin. This change |
| address both issues. From Juha Niskanen (2015-02-03). |
| * apps/netutils/netlib: Add utilities to convert to/from prefix lengths |
| from/to 128-bit network masks (2015-02-06). |
| * apps/nshlib: Modify the NSH IPv6 ifconfig command to show the more |
| standard post-pended prefix value, rather than the full 128-bit netmask |
| (2015-02-06). |
| |
| 7.9 2015-04-14 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/ostest: Improved error checking for sem_timedwait() |
| from Juha Niskanen (2015-02-20). |
| * apps/netutils/Kconfig, Make.defs, and pppd/: Add a PPP daemon. From |
| Max Neklyudov (2015-03-11). |
| * Rename arch_nshinitialize() to board_app_initialize() (2015-03-30). |
| * apps/nshlib: NSH initialization now calls boardctl(BOARDIOC_INIT) |
| instead of board_app_initaliaze(). Remove support for |
| CONFIG_NSH_ARCHMAC. It is not used and there are better ways to do |
| that operation (2015-03-31). |
| * apps/examples/touchscreen: No longer calls arch_tcinitialize() or |
| arch_tcuninitialize(). Instead the new OS interface boardctl() is |
| called to perform these test operations on the touchscreen driver |
| (2015-03-31). |
| * apps/examples/adc: Change apps/examples/adc to that is now calls |
| boardctl() instead of adc_devinit() in order to initalize the ADC |
| device(2015-03-31). |
| * apps/examples/pwm/: Replace calls to pwm_devinit() in |
| apps/examples/pwm with calls to boardctl() (2015-03-31). |
| * apps/examples/: More renaming: up_lcdinitialize->board_lcd_initialize, |
| up_lcdgetdev->board_lcd_getdev, up_lcduninitialize->board_lcd_uninitialize |
| (2015-04-04). |
| * apps/examples/nxlines/: Add the new 'capped' parameter to nx_drawline() |
| calls (2015-04-05). |
| * apps/modbus/tcp: Fix some complile problems when TCP is enabled |
| (2015-04-06). |
| * apps/system: Clean up Kconfig menus. The way it worked before, it was |
| difficult to see what was enabled and what was not. menus replaced |
| with menuconfig (2015-04-07). |
| * apps/examples/ostest/sigprocmask.c: Add a simple test of sigprocmask, |
| sighold, and sigrelse (2015-04-09). |
| * apps/modbus: Includes extensions to support RTU master mode by |
| Armink(383016632@qq.com): |
| https://github.com/armink/FreeModbus_Slave-Master-RTT-STM32. Ported |
| to NuttX by Darcy Gong. |
| * apps/nshlib: Allow NSH 'date' command with no hardware RTC. Thisi |
| command is useful without an RTC too. Also, this permits testing on |
| the simulator which never has an RTC (2015-04-11). |
| * apps/netutils/ppp: Make pppd PAP authentication optional. From |
| Brennan Ashton |
| * apps/examples/pppd: Add PPPD test case. Split out from |
| apps/netutils/pppd by Brennan Ashton. |
| * apps/netutils/pppd: Spit up pppd utils. From Brennan Ashton. |
| * apps/system/zoneinfo: All logic to build timezone info. Does not do |
| much else yet (2015-04-14). |
| |
| 7.10 2015-06-09 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/system/zoneinfo: Add logic to build a ROMFS file system |
| containing the timezone data (2015-04-15). |
| * apps/nshlib/nsh_timcmds.c: Check return values from time functions |
| (2015-04-15). |
| * apps/examples/nxlines: Fix missing right bracket that causes |
| compile error when CONFIG_NX_XYINPUT=y. From Librae (2015-04-16). |
| * apps/examples: When boardctl() fails, need to print errno not the |
| returned value which will always be -1 (2015-04-16). |
| * apps/examples: Correct use of the BOARDIOC_GRAPHICS_SETUP boardctl() |
| call (2015-04-16). |
| * apps/examples/ltdc: Add testing support for the STM32 LTDC's 2D |
| DMA. From Marco Krahl (2015-04-16). |
| * apps/nshlib/: Fix handling of gmtime_r return value in time commands. |
| gmtime_r returns a pointer, not an int (2015-04-21). |
| * apps/netutils/ntp: Fix mismatched sched_lock/unlock. Noted by |
| Juha Niskanen (2015-05-06). |
| * apps/examples: Modify/simpify apps/examples build files. From Roman |
| Saveljev (2015-05-06). |
| * apps/nshlib/nsh_netinit.c and apps/examples/ustream/: Add poll |
| support for Unix stream sockets. From Jussi Kivilinna (2015-05-12). |
| * apps/examples/ostest: Add a test of nested signals. There are no |
| failures to handle signals but neither am I getting any nested |
| signal handling (2015-05-12). |
| * apps/nshlib: Enhancements to NSH ifconfig for case of multi-link |
| operation, TUN device and local connections. From Max Neklyudov |
| (2015-05-19). |
| * apps/nshlib: Enhanced output to NSH ping command from Max Neklyudov |
| (2015-05-27). |
| * apps/examples/elf: Add configuration options to support building the |
| hello++4 example that depends upon having uClibc++ available. From |
| Leo aloe3132 (2015-05-29). |
| * apps/platform/stm32f4discovery: Move up_cxxinitialize from |
| nuttx/configs/stm32f4discovery/src to apps/platform/stm32f4discovery |
| where it belongs (2015-05-29). |
| * apps/examples/elf/tests/helloxx: Add hello++5 to ELF example. From |
| Leo Aloe3132 (2015-06-01). |
| * apps/netutils/thttpd/ and apps/examples/thttpd/: Add support for using |
| binfs/ instead of NXFLAT. NXFLAT is probably the better solution but |
| recently compiler changes make it unusable. binfs or ELF are fallback |
| binary formats. This commit adds an option to use binfs (2015-06-02). |
| * apps/examples/unionfs: Add a test of the union file system to |
| apps/examples (2015-06-05). |
| * apps/examples/thttpd now uses the Union File System if BINFS is |
| selected for CGI binaries (2015-06-06). |
| * apps/nshlib/: The NSH mount command now recognizes the Union file |
| system type when listing mounted file systems (2015-06-07). |
| |
| 7.11 2015-08-13 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/netutils/thttpd: Fix compilation problems when |
| CONFIG_THTTPD_GENERATE_INDICES is defined (2015-06-12). |
| * apps/include: Clean up and review of header files for conformance to |
| standards (2015-06-12). |
| * apps/examples/ostest/: Extend the OS test to include a test of |
| pthread_mutex_trylock() for recursive mutexes. From Juha Niskanen |
| (2015-06-16). |
| * apps/netutils/thttpd: Missing gci-src as a dependency path when |
| building with BINFS enabled (2015-06-18). |
| * The apps/ directory has been removed from the NuttX GIT repository |
| and now stands alone in its own repository (2015-06-27). |
| * apps/examples/poll: Fix a few bit-rot compilation errors (2015-07-01). |
| * apps/nshlib: NSH will now support an (optional) shutdown command if |
| the board provides the option CONFIG_BOARDCTL_POWEROFF. The command can |
| also be used to reset the system if CONFIG_BOARDCTL_RESET=y. |
| (2015-07-04). |
| * apps/system/poweroff: Remove the system poweroff command. This is |
| replaced with the NSH shutdown command (2015-07-02). |
| * apps/nshlib: Add support for a uname command (2015-07-04). |
| * apps/system/sysinfo: Remove the system sysinfo command. This is |
| replaced with the NSH uname command (2015-07-04). |
| * apps/syste/netdb: Add a command to access the network database |
| (2015-07-08). |
| * apps/netutils/dnsclient and include/netutils/dnsclient.h: Move the |
| DNS client logic into the NuttX C library. It is a necessary part |
| for the full implementation of the netdb logic and provides more |
| flexibility in that location (2015-07-10). |
| * apps/examples/ and apps/netutils: Remove calls to obsolete, non- |
| functional DNS interfaces (2015-07-11). |
| * apps/netutils and apps/nshlib: Replace calls to the non-standard |
| dns_gethotip with calls to standard gethostbyname (2015-07-11). |
| * apps/netutils/netlib and other files: Create netlib wrapper functions |
| around dns_getserver() and dns_setserver() to isolate application |
| code from changes to those interfaces (2015-07-12). |
| * apps/nshlib: Add an nslookup command (2015-07-13). |
| * apps/examples/nxlines: If CONFIG_NX_ANTIALIASING=y, then the nxlines |
| example now erases a line that is 2 pixels longer and 2 pixels wideri |
| than the line it drew. That eliminates edges effects due to applying |
| the anti-aliasing algorithm twice. A better solution would be to makei |
| anti-aliasing an option for each graphics call so you would rend the |
| line with anti-aliasing ON and clear it with anti-aliasing OFF. but I |
| don't have the wherewithal for that change today (2015-04-14)`. |
| * apps/nshlib and apps/examaples/thttpd: Change decoding to handle the |
| increased size of the scheduling policy field in the TCB (2015-07-23). |
| * apps/examples/ostest: Improve synchronization in round robin tests. |
| On very fast processors, there are race conditions that make the test |
| failure. Need better interlocking to assure that the threads actually |
| do start at the same time (2015-07-24). |
| * apps/examples/ostest: Add a test for the sporadic scheduler. This |
| test is failing as of this commit (2015-07-24). |
| * apps/system/readline: Add support for Unix-style tab complete toi |
| readline. This currently works only for built-in functions. |
| Contributed by Nghia Ho (2015-07-28). |
| * apps/system/readline and apps/nshlib: Extended the tab-completion |
| support to also expand NSH command names (2015-07-30). |
| * apps/system/readline and apps/nshlib: Add support for an in-memory |
| command line history that can be retrieved using the up and down |
| arrows. Contributed by Nghia Ho (2015-08-09). |
| * apps/Makefile: No longer depends on hardcoded lists of directories. |
| Instead, it does a wildcard search to find all appropriate |
| directories. This means that to install a new application, you |
| simply have to copy the directory (or link it) into the apps/ |
| directory. If the new directory includes a Makefile and Make.defs |
| file, then it will automatically be included in the build (2015-08-11). |
| * apps/Makefile, Kconfig, */Kconfig, tools/mkkconfig.sh: Add the tool |
| mkkconfig.sh that dynamically builds the apps/Kconfig file at |
| configuration time. The hardcoded configuration file has been removed |
| and now the top-level Makefile executes tools/mkkconfig.sh to auto- |
| generate the top-level Kconfig file. A new apps/ make target call |
| preconfig: was added to support this operation. Now you do not have |
| to modify the top-level Kconfig file to add a new directory into the |
| configuration; the top-level subdirectory simply needs to include a |
| Kconfig file and it will automatically be included in the |
| configuration. The native Windows build is temporarily broken until |
| a new apps/tools/mkconfig.bat script is generated (2015-08-11). |
| * apps/tools/mkkconfig.bat: Add the Windows script corresponding to |
| apps/tools/mkkconfig.sh. Needed for a Windows native build. Untested |
| on initial commit (2015-08-12). |
| |
| 7.12 2015-10-01 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/can: Extend the CAN loopback test by adding more |
| command line options (2015-08-17). |
| * apps/examples/usbserial: Can now be run as an NSH builtin-function. |
| Now uses a configurable IO buffer size (2015-08-20). |
| * Various Kconfig files in netutils: Fix some changes from from |
| NETUTILS_DNSCLIENT to NETDB_DNSCLIENT. From Pavel Pisa (2015-08-20). |
| * system/netdb: Failed to build if CONFIG_NET_HOSTFILE was not defined |
| because gethostbyaddr() was not available. Noted by OrbitalFox |
| (2015-08-21). |
| * apps/system/symtab: Optional canned symtab inclusion to the build. When |
| option CONFIG_SYSTEM_SYMTAB is selected and symbol table file |
| libc/symtab/canned_symtab.inc is prepared then application can |
| use system provided complete symbol table. The option has |
| substantial effect on system image size. Mainly code/text. If |
| loading of applications at runtime is not planned do not select |
| this. From Pavel Pisa (2015-08-23). |
| * apps/examples/nettest: Add option to suppress network initialization. |
| This is necessary if the nettest is run from NSH which has already |
| initialized the network (2015-08-26). |
| * apps/examples/nettest: Extend test so that can be performed using the |
| local loopback device (2015-08-26). |
| * apps/nshlib: Fix error handling in 'cat' command. On a failure to |
| allocate memory, a file was not being closed. From Bruno Herrera |
| (2015-08-26). |
| * apps/nshlib: Fix error handling in 'mv' command. On a failure to |
| expand the second path, the memory allocated for the expansion of the |
| first path was not being freed. From Bruno Herrera (2015-08-26). |
| * apps/examples/netloop: Add a test of the local loopback device |
| (2015-09-02). |
| * apps/modbus and apps/include/modbus: Macros PR_BEGIN_EXTERN_C and |
| PR_END_EXTERN_C were not defined in all contexts. Replace with |
| explicit expansion in all cases. From Stefan Kolb (2015-09-03). |
| * apps/canutils/uavcan: Add support for libuavcan. From Paul |
| Alexander Patience (2015-09-25). |
| * apps/examples/udpblaster: Add a test to stress the network by |
| sending UDP packets at a very high rate. (2015-09-30). |
| * apps/examples/uavcan: libuavcan example from Paul Alexander |
| Patience (2015-10-01). |
| |
| 7.13 2015-12-05 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/fstest: Add a generic file system test. This is |
| essentially the same as examples/smart, but has all of the SmartFS |
| specific logic ripped out. This was created for testing the new |
| tmpfs (2015-10-10). |
| * apps/examples/zerocross: Add a Zero Cross application example. |
| From Alan Carvalho de Assis (2015-10-13). |
| * apps/examples/media: Add a simple test for access of media via |
| a block driver or MTD driver (2015-11-09). |
| * apps/nshlib/nsh_ddcmd.c: Now that NuttX automatically converts |
| block devices to character devices, all of the BCH stuff in NSH |
| can be removed (2015-11-21). |
| * apps/system/hexed: Port the hexed command line hexadeciamal |
| editor to Nuttx. See http://apps.venomdev.net/hexed/. |
| Initial port is not functional (2015-11-21). |
| * apps/fsutils/smartfs: Move into apps/fsutils from kernel, now |
| uses only open and ioctl. From Ken Pettit (2015-11-23). |
| * apps/fsutils/smartfs/ and apps/nshlib/: Add configuration option |
| to supported multiple root directories. From Ken Pettit (2015-11-23). |
| * apps/nshlib: Add support for 'basename' and 'dirname' commands |
| (2015-11-23). |
| * apps/nshlib: Like bash, NSH set command should strip off any |
| leading or trailing whitespace (2015-11-23). |
| * apps/nshlib: The mount commands now accepts mount options (currently |
| needed only for the hostfs file system). From Ken Pettit (2015-11-25). |
| * apps/nshlib: NSH no longer calls losetup() and loteardown directly. |
| Now it opens /dev/loop and accomplishes these things using ioctl() |
| calls (2015-11-25). |
| * apps/nshlib: If CONFIG_NETDEV_STATISTICS=y, then print the network |
| driver statistics in the ifconfig (15-11-26). |
| * apps/nshlib: The 'ifconfig' command now uses /proc/net/<dev> to view |
| network device configuration and status and /proc/net/stat to show |
| network statistics. A consequence of this is that you cannot view |
| this network information if the procfs is not enabled and mounted at |
| /proc (2015-11-27). |
| * apps/nshlib: Remove all references to internal OS interface |
| netdev_foreach(). Logic in ifconfig, ifup, and ifown now use the |
| procfs file system to examine networking status. (2015-11-27). |
| * apps/nshlib: Add a new NSH losmart command. losmart setups up |
| a loop device for the smart MTD driver similar to losetup but |
| with different syntax. From Ken Pettit (2015-11-28). |
| * apps/nshlib: The I/O buffer, g_iobuffer, should not be a global |
| buffer. That will not work in an environment where there are multiple |
| NSH sessions. The I/O buffer must, instead, be a part part of the |
| session-specific data defined in nsh_console.h (2015-11-28). |
| * apps/nshlib: The 'ps' command now uses /proc/<pid>/ to obtain |
| task status information. A consequence of this is that you cannot use |
| the 'ps' command if the procfs is not enabled and mounted at |
| /proc (2015-11-28). |
| |
| 7.14 2016-xx-xx Gregory Nutt <gnutt@nuttx.org> |
| |
| * netutils/telnetd: Move the Telnet driver from netutils/telnetd to |
| nuttx/drivers/net. It is a driver an belongs in the OS. There are |
| still some partitioning issues with the interface to the Telnet |
| driver (2015-12-07). |
| * netutils/telnetd: No longer calls OS interface telnet_driver. Now |
| creates Telnet sessions by opening a new factory device at /dev/telnet |
| and then using ioctl calls to create the session character drivers |
| at /dev/telnetN (2015-12-07). |
| * netutils/ping: Unfinished implementation of ping/ping6 using raw |
| sockets (2015-12-11). |
| * examples/module: Add a test harness for verifying NuttX kernel |
| modules (2015-12-12). |
| * apps/nshlib: Add module commands: insmod, rmmod, and lsmod |
| (2015-12-13). |
| * apps/examples/pca9635: Add a simple test of PCA9635PW PWM LED |
| driver. From Alan Carvalho de Assis (2015-12-15). |
| * apps/examples/ostest: Add a test of POSIX timers using |
| SIGEV_THREAD (2015-12-30). |
| * apps/nshlib: Add a 'time' command that may be used to time the |
| execution of other commands (2015-12-31). |
| * apps/netutils/netlib: Add netlib_get_dripv4addr() and |
| netlib_get_ipv4netmask(). From Pelle Windestam (2016-01-14). |
| * apps/fsutils/passwd: Utility library for accessing a password |
| file like /etc/passwd (2016-01-19). |
| * apps/nshlib/nsh_passwdcmds.c: Add useradd, userdel, and passwd |
| commands (2016-01-20). |
| * apps/nshlib: Now supports a Message of the Day (MOTD) that will |
| be presented after the NSH greeting (2015-01-20). |
| * apps/nshlib: All sessions may be protected with logins using |
| the encrypted password in /etc/passwd (2016-01-20). |
| * apps/fsutils/inifile: Move system/inifile to fsutils/inifile |
| where it seems to fit in better (2016-01-20). |
| * apps/nshlib: Extend logins. Added: Optional platform-specific |
| function to perform password verification and optional delay |
| after each failed login attempt (2016-01-22). |
| * system/ramtron: Removed completely. It inappropriately used |
| an internal OS interface (up_spiinitialize), that has been |
| obsoleted. That's what happens when you violate interface |
| boundaries between the application and the OS (2016-01-27). |
| * apps/platform/Makefile: Use a relative path to the board |
| directory link rather than the absolute path. For Cygwin, the |
| absolute would would need converted with cygpath. But just using |
| the relative path is a simpler solution (2016-01-27). |
| |
| 7.15 2016-03-27 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/chat and apps/netutils/chat: Contributed by |
| Vladimir Komendantskiy (2016-01-29). |
| * apps/examples/ubloxmodem: app to control the power state of the |
| modem in nsh. From Vladimir Komendantskiy (2016-01-31). |
| * apps/system/ubloxmodem: Moved the modem application from |
| examples/ to system/ (2016-01-31). |
| * apps/system/i2c: The I2C tool now obeys it OS interfacing: |
| it now uses an I2C character driver to access the I2C bus |
| (2016-02-02). |
| * apps/netutils/netlib: Add utility functions to support accesses |
| to the ARP table (2016-02-08). |
| * apps/netutils/dhcpd: DHCPD no longer calls directly into the |
| OS but uses the new network IOCTL commands to modify the ARP |
| table (2016-02-08). |
| * apps/nshlib: Add an 'arp' command that will support access to |
| the OS ARP table (2016-02-08). |
| * apps/nshlib: 'ps' command will show CPU if SMP is enabled |
| (2016-02-19). |
| * apps/examples/leds: An example to demonstrate use of LED |
| driver (2016-02-20). |
| * apps/examples/smp: Add a test to verify SMP configurations |
| (2016-02-21). |
| * apps/examples/rgbled: Example using the RGB LED driver to |
| drive an RGB LED via PWM. From Alan Carvalho de Assis |
| (2016-02-23). |
| * apps/platform/sabre-6quad: Add a platform directory for the |
| Sabre 6Quad board (2016-03-01). |
| * apps/examples/ostest: Add a test of TLS (2016-03-11). |
| * apps/modbus/nuttx/portserial.c: Was not returning an error |
| on failure to open the device driver. From Olololshka kokoko |
| (2016-03-16). |
| * apps/examples/sched_note: Add a simple example to exercise |
| the scheduler instrumentation logic. Kind of buggy right now |
| (2016-03-17). |
| * apps/system/cdcacm, usbmsc, and composite, apps/examples/usbserial, |
| composite, usbterm: Use new boardctl() instead of calling directly |
| in the OS when possible. There are still a few bad OS calls for |
| USB device interfaces that do not yet have boardctl() commands |
| (2016-03-25). |
| |
| 7.16 2016-06-01 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/system/sdcard: Remove the SD card application. This |
| application violates OS/application interface rules and has been |
| moved to Obsoleted/apps/system/sdcard (2016-03-29). |
| * apps/examples/alarm: Add a simple test of the ALARM iotcl calls |
| of the RTC driver (2016-04-03). |
| * apps/examples/nximage: No configuration option to select |
| greyscale. |
| * apps/canutils/uavcan: Update UAVCAN version. From Paul Alexander |
| Patience (2016-05-03) |
| * Several Makefiles: Add .PHONY definitions to prevent 'clean up to date' |
| message weirdness; Add default definitions for some commonly used |
| things when 'make clean' is used without .config or Make.defs files |
| installed (2016-05-10). |
| * apps/canutils/libcanard: Add libcanard UAVCAN library. From Paul |
| Alexander Patience (2016-05-12) |
| * apps/examples/watchdog: Remove call to up_wdginitialize(). This |
| interface should not be accessed from application code (2016-05-18). |
| * apps/system/sched_note: Move the schduler note monitor from examples/ |
| to system/ (2016-05-18). |
| * apps/platform/nucleo-144: Add platform files for NUCLEO-144 |
| (NUCLEO-F746ZG). From Mark Olsson (2016-05-19). |
| * apps/netutils/esp8266: ESP8266 driver application. From Pierre-noel |
| Bouteville (2016-05-21). |
| * apps/canutils/: Rename uavcan to libuavcan. From Paul Alexander |
| Patience (2016-05-25). |
| * apps/examples/media: You can now override the default device driver |
| path by providing an alternal path on the command line. From Sébastien |
| Lorquet (2016-06-01). |
| |
| 7.17 2016-07-25 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/examples/alarm: ioctl call was clobbering file descriptor |
| (2016-06-02). |
| * apps/system/flash_eraseall: Removed! This logic violates the OS/ |
| application interface and cannot be supported. The old code can still |
| be found in the 'Obsoleted' repository (2016-06-03). |
| * apps/fsutils/flash_eraseall: IOCTL wrapper for MDCIO_BULKERASE command |
| (2016-06-04). |
| * apps/system/flash_eraseall: Restored! Using the new IOCTL wrapper at |
| apps/fsutils/flash_eraseall (2016-06-04). |
| * apps/canutils/libuavcan: Fix for recent change to STM32 timer frequency |
| definiitions (2016-06-05). |
| * Many files: Change to the way that Kconfig files are generated in order |
| to better support reuse of the apps/ directory in NuttX products. Changes |
| include: Make the full tree use wildcards make.defs, Add empty preconfig |
| rules to 'leaf' makefiles, Use directory.mk for recursive dir makefiles, |
| Individual app kconfig fixes, Recursive Kconfig autogeneration, Add |
| kconfig files for pcode and tiff, and fix a gitignore rule, From |
| Sébastien Lorquet (2016-06-06). |
| * apps/nshlib: Make NSH net-initialization be a configuration option. From |
| Marten Svanfeld (2016-06-09). |
| * netutils/ntpc and nshlib: NTP Client: All retries; Add initialization |
| in NSH network startup logic. From David S. Alessio (2016-06-09) . |
| * Rearrange make to eliminate Kmenu files From Sebastien Lorquet |
| (2016-06-09). |
| * apps/nshlib: Make NSH net-initialization be a configuration option. |
| From Marten Svanfeldt (2016-06-09). |
| * Make sure that APPNAME is defined in all Makefiles that generate |
| applications. From Sebastien Lorquet (2016-06-09). |
| * apps/netutils/esp8266/: Add logic to set the BAUD rate. From Pierre- |
| noel Bouteville (2016-06-11). |
| * apps/netutils/esp8266/: CONFIG_SERIAL_TERMIOS must be defined in |
| order to set BAUD (2016-06-11). |
| * Change dbg() and vdbg() to err() and info() (2016-06-11). |
| * Change some *err() message to *info() messages if what was a *dbg() |
| message does not indicate and error condition (2016-06-14). |
| * Add _ to front of debug macros (2016-06-16). |
| * SYSLOG: Remove llinfo(), *llwarn(), and llerr(). These are no longer |
| supported in the redesigned syslog() logic (2016-06-20). |
| * apps/canutils/libcanard: update version. From Paul Alexander Patience |
| (2016-06-22). |
| * apps/examples/can: Some variables were not declared in all required |
| cases. From Sebastien Lorquet (2016-06-23). |
| * apps/gpsutils/minmean: Fix minmea Makefile to find the libapp at the |
| apps/. From Alan Carvalho de Assis (2016-06-23). |
| * apps/canutils/canlib: Basic CAN utility library. From Sebastien Lorquet |
| (2016-06-24). |
| * apps/nshlib/Kconfig: Move some NSH settings out of nuttx/configs/Kconfig |
| to here. Why was it in the NuttX tree (2016-06-24). |
| * apps/platform/olimex-stm32-e407: Add platform files for Olimex STM32 |
| E407. From Mateusz Szafoni (2016-06-27). |
| * apps/system/hex2bin: Move the portable library portion of hex2bin to |
| nuttx/libc/hex2bin where it can be shared with the OS internals |
| (2016-06-27). |
| * apps/nshlib: 'ps' command now prints out the stack usage if stack |
| coloration is enabled. From Frank Benkert (2016-06-30). |
| * All inclusion of apps/ header files were removed from the nuttx/ |
| repository. This caused a lot of reshuffling of logic: binfmt pcode |
| support, usbmonitor is now a kernel thread, TZ/Olson database moved to |
| libc/zoneinfo (2016-06-29). |
| * apps/include directory structure reorganized. There are no longer any |
| header files in the apps/include/. directory. Rather, sub-directories |
| were added to match the partitioning of apps/ sub-directories and the |
| header files were moved into the appropriate sub-directory. This |
| change is intended to help with some changes be considered by |
| Sébastien Lorquet (2016-07-01). |
| * apps/nshlib: Allow stack usage to be disabled on constrained systems. |
| From David Sidrane (2016-07-01). |
| * apps/examples/canard: Add canard example application. From Matthias |
| Renner (2016-07-08). |
| * apps/builtins: exec_builtin was not using the provided open flags. As |
| a result >> redirection was not working (2016-07-10). |
| * apps/netutils/ntpclient: The NTP client will now optionally use |
| pool.ntp.org as the NTP server; and reset the retry count upon success |
| -- more robust. From David Alessio (2016-07-10). |
| * apps/nshlib/nsh_proccmds.c: Recent enhancements to cmd_ps trips a |
| floating point exception if LIBC_FLOATINGPOINT is not defined (at |
| least on Cortex M4 w/ hardfloat). IÂ’m using a buildroot gcc |
| configured to support Cortex-M4F and the hard float ABI, target files |
| are compiles with: -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 |
| -mfloat-abi=hard. IÂ’m not sure the best way to address this, but the |
| this chage is the first that comes to mind. Note, I added the float |
| qualifier ‘F’ after a few constants to prevent the compiler from |
| promoting the multiplication and division to double (expensive on |
| M4F) then demoting to single float for the store. From David |
| Alessio (2016-07-10). |
| * Call all includes fronm <apps/bla/bla.h> to "bla/bla.h". From |
| Sebastien Lorquet (2016-07-11). |
| * Build System: Add apps/include to include path in top-level |
| Make.defs file. Remove multiple definitions of INCDIR opt |
| (2016-07-11). |
| * apps/netutils, uIP webserver: Fix a data declaration in a header file |
| (2016-07-11). |
| * apps/nshlib: In ps command, don't show stack usage if |
| CONFIG_STACK_COLORATION is not enabled (2016-07-13). |
| * apps/netutils/esp8266: In Kconfig, select ARCH_HAVE_NET when |
| NETUTILS_ESP8266 is selected. This allows, among other things, |
| support for network debug output. From Pierre-noel Bouteville |
| (2016-07-14). |
| * apps/nshlib: PS Command: When Priority Inheritance is enabled, the |
| format of /proc/<PID>/status changes to show both the current priority |
| and the threadÂ’s base priority. This messes up the format of cmd_ps. |
| From David Alessio (2016-07-15). |
| * apps/examples/pty_test: PTY test program. From Alan Carvalho de Assis |
| (2016-07-15). |
| * apps/examples/media: media example was intended to take either a |
| command line argument, or a compiled-in default value from config. |
| However, the default was ignored, leading to confusing error messages. |
| From ziggurat29 (2016-07-17). |
| |
| 7.18 2016-10-08 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/canutils/libuavcan: Under certain circumstances, DELIM make not |
| be defined in Makefile (2016-07-28). |
| * Add the dirlinks target to some Makefiles. This plugs some holes |
| opened by last chicken-and-egg build fix (2016-07-28). |
| * apps/examples/gpio: Add a simple test of the GPIO driver (2016-08-01). |
| * Add definition for APPNAME in apps/canutils/canlib. From Sebastien |
| Lorquet (2016-08-01). |
| * Add DIRLINK and DIRUNLOBK tool definitions to Make.defs (2016-08-02). |
| * apps/exmples/gpio: Should not claim an error if we are only asked to |
| read an output pin (2016-08-03). |
| * apps/nshlib/: Fix FIFO_SIZE vs PIPE_SIZE (2016-08-04). |
| * apps/examples/rfid-readuid: Add RFID_READUID sample application. From |
| Alan Carvalho de Assis (2016-08-06). |
| * apps/interpreters/minibasic: Add a port of Mini Basic, version 1.0, |
| written by Malcom McLean and released under the Creative Commons |
| Attribution license (2016-08-11). |
| * apps/examples: Add Oneshot timer example (2016-08-12). |
| * apps/system/tee: Port tee command from NetBSD (2016-08-12). |
| * apps/examples/oneshot: If the requested delay is > max_delay, then |
| break the delay up into several pieces (2016-08-15). |
| * apps/examples/oneshot: A thought about how we might improve accuracy |
| of long delays (2016-08-15). |
| * nshlib/Kconfig: Fix hex representation of IP address. Noted by |
| Michal Lyszczek (2016-08-19). |
| * apps/gpsutils: Fix an error min minmea. From Aleksandr Vyhovanec |
| (2016-08-24). |
| * apps/nshlib/nsh_syscmds.c: missing semicolon. From Mateusz Szafoni |
| (2016-08-25). |
| * nshlib/: Add logic to support an NSH-specific system command |
| (2016-08-25). |
| * apps/system/system: Add a generic system command. Current |
| implentation cannot use /bin/sh and spawns the custom NSH system |
| command directly (2016-08-25). |
| * apps/examples/system: Add a simple test of the system command. Fix |
| the first bug discovered by the test (2016-08-25). |
| * apps/nshlib: Add printf command to NSH, e.g., controlling |
| /dev/userleds from command line: nsh> printf \x01 > /dev/userleds. |
| From Alan Carvalho de Assis (2016-10-01). |
| * apps/platform: Add support for STM32L476-MDK (2016-10-06). |
| * apps/nshlib: Don't try to flush output streams if stdio buffered |
| I/O is not supported (2016-10-06). |
| |
| 7.19 2016-10-08 Gregory Nutt <gnutt@nuttx.org> |
| |
| * Rename examples/buttons to examples/archbuttons. From Alan Carvalho |
| de Assis (2016-10-11). |
| * Add a new buttons example that uses the button character driver |
| instead of the architecture buttons directly. From Alan Carvalho de |
| Assis (2016-10-11). |
| * apps/nshlib: nsh_getdirpath(), use snprint instead of sprintf to avoid |
| possibility of buffer overrun. Noted by Chung Hwan Kim (2016-10-11). |
| * examples/cctype: Add an example to verify cctype functions |
| (2016-10-22). |
| * Add platform support for the ESP32 core v2 board (2016-10-31). |
| * Modbus Master is missing many files and doesn't compile at all. More |
| details in https://groups.yahoo.com/neo/groups/nuttx/conversations/topics/13734. |
| From Vytautas Lukenskas (2016-11-03). |
| * graphics/traveler/tcledit and libwld: Add an X11 Tcl/Tk tool that can |
| be used to edit Traveler world files (2016-11-12). |
| * platform/esp32-core: Fix some naming that prenvented building the C++ |
| support (2016-11-14). |
| * Make.defs: Using wrong link script if native window tool used with |
| Cygwin (2016-11-17). |
| * apps/examples/timer: Should detach signal handler before exiting |
| (2016-11-18). |
| * Fixed bug that didn't free ftpd ressources on exit. From Pascal |
| Speck (2016-11-21). |
| * The examples/qencoder app was trying to init the encoder by a direct |
| call into the board, cheating in a local header to declare the |
| normally unavailable function prototype. From Sebastien Lorquet |
| (2016-11-22). |
| * apps/examples/archbuttons: Removed becaue it violates OS interface |
| principles (2016-11-22). |
| * apps/system/sched_note: Extend to include additions to instumentation |
| for SMP (2016-11-27). |
| * apps/system/sched_lock: Add support for spinlock notes (2016-12-01). |
| * Graphics: Remove all NX server taks. Instead, call boardctl() to the |
| NX server kernel thread (2016-12-01). |
| * Remove RGMP example (2016-12-02). |
| * Remove some garbage characters added by error. From Pierre-Noel |
| Bouteville (2016-12-04). |
| * netutils/ntpclient: Fix missing left parenthesis. From Pierre-Noel |
| Bouteville (2016-12-04). |
| * Import patch to fix:cJSON_PrintUnformatted() behaves unexpected if an |
| empty array shall be printed to text. from Jerome Lang 2012-04-19. |
| From Pierre-Noel Bouteville (2016-12-04). |
| * esp8266 update cosmetic and many bug fix. From Pierre-Noel Bouteville |
| (2016-12-04). |
| * fix bug un ftpd file or socket may be not closed. From Pierre-Noel |
| Bouteville (2016-12-04). |
| * Remove all usage of BOARDIOC_ADCTEST_SETUP, BIOARDIOC_PWMSETUP |
| (2016-12-05). |
| * Remove BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the |
| board initialization logic just like every other device driver |
| (2016-12-06). |
| * Add support for new scheduler instrumentation (2016-12-07). |
| * examples/ostest: Extend the pthread cancellation test to exercise |
| pthread_cleanup_push() (and pthread_cleanup_pop() indirectly via |
| pthread_cancel() and pthread_exit() (2016-12-08). |
| * examples/ostest: Add some delays to the pthread cancellation test. |
| With deferred cancellation enabled, things happen more asynchronously |
| (2016-12-10). |
| * OS test: enhance pthread cancellation test some (2016-12-11). |
| * Remove std_readline(). This called up_getc() and up_putc() directly, |
| violating the POSIX OS interface (2016-12-13). |
| * NSH: dd command will show statistics. From Masayuki Ishikawa |
| (2016-12-19). |
| * Add platform support for the Olimex STM32 P407 (2016-12-21). |
| |
| 7.20 2017-03-08 Gregory Nutt <gnutt@nuttx.org> |
| |
| * OS test: Was ignoring CONFIG_EXAMPLES_OSTEST_FPUTESTDISABLE (2016-12-29). |
| * apps/examples/nxtext: Make line spacing configurable (2017-01-03). |
| * apps/graphics/traveler/tools: Fix linkage issue. The -lm should come |
| after -o binname. From Alan Carvalho de Assis (2017-01-07). |
| * apps/system/zmodem/host/nuttx/compiler.h synchronized with |
| nuttx/nuttx/include/nuttx/compiler.h. From Aleksandr Vyhovanec |
| (2017-01-09). |
| * examples/sotest: Add a test for shared libraries (2017-01-23). |
| * examples/ostest: Add new error print and modify comments in cancel |
| test. From Juha Niskanen (2017-01-24) |
| * In apps/examples/mtdpart/mtdpart_main.c where |
| CONFIG_EXAMPLES_MTDPART_NPARTITIONS defining is checked should be |
| #ifndef instead of #ifdef. Noted by Oleg Evseev (2017-01-30). |
| * NSH: Add support for the 'ln' command (2017-02-02). |
| * NSH ls command: if node is a symobolic link, use readlink() to get and |
| the display the target of the symblic link (2017-02-03). |
| * NSH: Add readlink command (2017-02-05). |
| * examples/ostest: Add a test of setvbuf() (2017-02-09). |
| * apps/examples/stat: Add a simple test for stat(), fstat(), and |
| statfs() (2017-02-13). |
| * strcasecmp, strncasecmp, bzero, bcmp, and bcopy should be defined in |
| strings.h, not string.h. bzero, bcmp, and bcopy are legacy functions; |
| the contemporary counterparts should be used instead (2017-02-16). |
| * examples/stat: Add test for fstatfs() (2017-02-17). |
| * C files that reference ANIOC_TRIGGER now need to include |
| nuttx/analog/ioctl.h (2017-02-25). |
| * Add platform files for nucleo-f334r8. From Mateusz Szafoni (2017-02-26). |
| * NSH: Eliminate a warning when all memory inspection commands are |
| disabled (2017-02-27). |
| * netutils/webserver: Needs to include strings.h for strcasecmp() |
| (2017-02-27). |
| * nxplayer: Needs to include strings.h for strcasecp() (2017-02-27). |
| * Remove an unused variable when calling sigwaitinfo() and |
| sigtimedwait(). From Masayuki Ishikawa (2017-03-02). |
| * The CONFIG_NETUTILS_HTTPD_PATH constant is used by httpd_mmap.c and |
| httpd_sendfile.c but It was not present in Kconfig menu. From Maciej |
| Wójcik (2017-03-05). |
| |
| 7.21 2017-06-05 Gregory Nutt <gnutt@nuttx.org> |
| |
| * Add c++ platform/bambino-200e with C++ initialization. From Alan |
| Carvalho de Assis (2017-03-08). |
| * increase number of supported PWM channels from 4 to 6. From Andreas |
| Bihlmaier (2017-03-09). |
| * NSH library: In nsh_argexand(), if CONFIG_NSH_ARGCAT is defined but |
| CONFIG_NSH_CMDPARMS defined and/or CONFIG_DISABLE_ENVIRON not |
| defined, then there is a situation that causes an infinite loop in |
| the parser. Noted by Freddie Chopin (2017-03-09). |
| * apps/examples/hidkbd: Remove call to arch_usbhost_initialize(). |
| That is violation of the OS interfacing rules and will no longer be |
| supported. USB host should be initialized as part of the normal |
| board bring-up logic as with any other devices and should not involve |
| illegal calls from applications into the OS (2017-03-09). |
| * apps/examples/usbterm: Removed because it is not very useful and |
| because it can be configured to use an illegal call into the OS |
| (2017-03-09). |
| * netutils/netlib: Add one wireless IOCTL wrapper. For now, this is |
| just a test to be sure that the wireless IOCTL definitions are in |
| place (2017-03-13). |
| * netutils/nshlib: Add wrapper to get the wireless ESSID (2017-03-13). |
| * Adds a test program for the XBox One controller driver (xbc_test). |
| From Brian Webb (2017-03-18). |
| * built-in libc defect workaround: replace '%6.6u' format with an |
| equivalent '%06u'. From Tomasz Wozniak (2017-03-21). |
| * Clicker-STM32: Add platform directory w/ C++ support (2017-03-22). |
| * examples/ostest: Add a test of robust mutexes (2017-03-26). |
| * examples/ostest: Robust mutex test needs to call |
| pthread_mutexattr_setrobust() (2017-03-27). |
| * Rename CONFIG_MUTEX_TYPES to CONFIG_PTHREAD_MUTEX_TYPES (2017-03-27). |
| * examples/mm: Fix Makefile. Built-in was not being registered |
| (2017-03-28). |
| * nshlib: fix building when CONFIG_NET_USRSOCK enabled with other |
| link-layer. From Jussi Kivilinna (2017-03-31). |
| * Add examples/usrsocktest application for USRSOCK testing. From Jussi |
| Kivilinna (2017-04-03). |
| * NSH: Fix some warnings about integer/pointer casts of different sizes |
| (probably only effects 64-bit simulation) (2017-04-03). |
| * examples/nettest: Trying to adapt to use for testing 6LoWPAN |
| (2017-04-03). |
| * examples/nettest: If doing loopback, but not using the official |
| loopback device, then use the server should use the configured client |
| IP address (2017-04-04). |
| * Added support for set [{+|-}{e|x|xe|ex}] [<name> <value>]. Set the |
| 'exit on error control' and/or 'print a trace' of commands when |
| parsing scripts in NSH. The settinngs are in effect from the point |
| of exection, until they are changed again, or in the case of the init |
| script, the settings are returned to the default settings when it |
| exits. Included child scripts will run with the parents settings and |
| changes made in the child script will effect the parent on return. |
| Use 'set -e' to enable and 'set +e' to disable (ignore) the exit |
| condition on commands. The default is -e. Errors cause script to |
| exit. Use 'set -x' to enable and 'set +x' to disable (silence) |
| printing a trace of the script commands as they are ececuted. The |
| default is +x. No printing of a trace of script commands as they are |
| executed. From David Sidrane (2017-04-05). |
| * Print expanded variables if -x. From David Sidrane (2017-04-05). |
| * examples/udpblaster: Several fixes to work with 6LoWPAN (2017-04-06). |
| * examples/udpblaster: Add logic to bind the local UDP socket to a |
| well-known address (2017-04-06). |
| * 6LoWPAN: Add network IOCTL support to set the node address |
| (2017-04-06). |
| * examples/ostest: Add tests for pthread_rwlock. Adding tests to be |
| used to verify the pthread_rwlock lock works. From Mark Schulte |
| (2017-04-07). |
| * Remove CONFIG_PTHREAD_RWLOCK. Rwlock interfaces built |
| unconditionally (2017-04-07). |
| * examples/ostest: pthread rwlock additional tests and bugfixes. From |
| Mark Schulte (2017-04-07). |
| * netutils: Add a helper function to convert a string to a 6LoWPAN node |
| address (2017-04-08). |
| * NSH library: Extend ifconfig to support 6LoWPAN. Adapt to some |
| changes in configuration variable usage (2017-04-08). |
| * NSH set command: Eliminate useless argc check of SCRIPTS are enabled |
| but ENVIRONMENT is disabled (2017-04-09). |
| * examples/ostest: additional test for rwlock and one for cancel |
| cleanup handlers. From Juha Niskanen (2017-04-10). |
| * wireless/wapi: Quick port of Wapi wireless services. No build |
| support yet. This also depends on features not supported by NuttX. |
| This is a work in progress (2017-04-10). |
| * wireless/wapi: Remove logic that depnds on Linux netlink. Add |
| (untested) build support (2017-04-10). |
| * wireless/wapi: Remove functionality that depends on the Linux |
| procfs: This includes only 1) listing of available interfaces and 2) |
| listing of all routes (2017-04-10). |
| * Beginning real design of wapi application based on Wapi sample code |
| (2017-04-10). |
| * wireless/wapi: Re-write of wapi tool UI (2017-04-11). |
| * examples/ostest: clarify when pthread clean-up test mutex need to |
| remain usable. From Juha Niskanen (2017-04-12). |
| * examples/hidkbd: Add some missing configuration settings (2017-04-18). |
| * NSH library: Fix open flags in nsh_codeccmd.c. From Masayuki |
| Ishikawa (2017-04-19). |
| * netlib and NSH: Add logic to set the IEEE802.15.4 PAN ID (2017-04-18). |
| * wireless/ieee802154: Starts framing out iwpan tool, similar in |
| concept to wapi. From Anthony Merlino (2017-04-20). |
| * ieee802154: Move non-radio files from libradio to libutils. Add |
| ieee802154_getpanid() (2017-04-21). |
| * wireless/ieee802154: Beginning of support for IEEE 802.15.4 MAC |
| library (2017-04-21). |
| * wireless/ieee802154/libmac: Finishes all defined MAC IOCTL helpers |
| (there are a few that are not defined) (2017-04-21). |
| * netlib: Get and/or set PAN ID of IEEE 802.15.4 radio (2017-04-21). |
| * wireless/ieee802154: libaudio and libmac need to return the correct |
| error codes (2017-04-22). |
| * nshlib: nsh_netcmds.c should include netlib.h even if neither TCP nor |
| UDP are enabled (2017-04-25). |
| * apps/wireless/wapi: Correct an error in dependency generation |
| (2017-04-25). |
| * examples: random: avoid stack overflows. From Juha Niskanen |
| (2017-04-26). |
| * wireless/wapi: Improve error reporting IOCTL failures (2017-04-26). |
| * I need to look at the registers that are at or around 0xe000ef90. |
| Using mw and xd, I see that nsh does not support pointers greater |
| than 0x7fffffff. A quick look at the source shows that the pointers |
| for those two commands are set with calls to strtol() rather than |
| strtoul(). Changing the two pointer-setting instances to strtoul() |
| fixes the problem, at least for my architecture/config. From Ian |
| McAfee (2017-04-26). |
| * NSH: Needs to include tftp.h if TFTP not disabled (2017-04-29). |
| * netutils/dhcpc: Make the network device name a configuration |
| option. Was hardcoded to eth0 but may, instead, need to be wlan0 |
| (2017-05-02). |
| * nshlib/nsh_netinit.c: If IEEE802.11 selected use wlan0 instead of |
| eth0 for network device name (2017-05-02). |
| * wireless/wext: Add drivers_wext from the WPA supplicant; Integrate |
| into NSH. From Simon Piriou (2017-05-02). |
| * 6LoWPAN: Replace some Rime address naming with more consistent |
| short/exended address terminology (2017-05-04). |
| * wireless/ieee802154: Removes libradio to coincide with removal of |
| ioctl with radio. Moves all functionality from libradio to libmac. |
| From Anthony Merlino (2017-05-05). |
| * wireless/wapi: wpa_driver_wext_associate() now accepts a |
| configuration parameter that can be used to specify the wireless |
| properties (2017-05-06). |
| * nshlib: NSH now has configuration options to select the |
| wireless properties. It builds the configuration structure and |
| passes this to wpa_driver_wext_associate() so that it will set the |
| network as configured (2017-05-06). |
| * Add platform files for nucleo-l452re and nucleo-l496zg. From Juha |
| Niskanen (2017-05-08). |
| * wireless/ieee802154: Adds rxonidle attribute helpers. From Anthony |
| Merlino (2017-05-08). |
| * wireless/ieee802154: Adds sniffer functionality back in to I8SAK |
| app. From Anthony Merlino (2017-05-08). |
| * NSH wireless setup: Move call to nsh_associate(). It should be |
| possible to associate with an AP when DHCPC is disabled (2017-05-09). |
| * Fix some calls to task_create(): argv[0] is the first parameter, not |
| the name of the task (2017-05-09). |
| * wireless/ieee802154: Restructures i8sak app and adds blaster |
| functionality. From Anthony Merlino (2017-05-09). |
| * examples/configdata: add stacksize and priority. From Juha Niskanen |
| (2017-05-10). |
| * Bitbucket Issue 5: I found an unexpected behavior in apps/ |
| configuration generation. Adding external symbolic link in apps/ |
| directory and using Make.defs for Kconfig generation, Kconfig file |
| has a wrong path in the source argument. It contains original dir |
| path outside of the source tree instead path to sub-directory in |
| apps/. The problem is connected with make/system symbolic link path |
| resolution. Corrected by a patch submitted by Artur Madrzak with |
| Issue 5 (2017-05-11). |
| * Bitbucket Issue 5, apps build system: The previous patch wasn't |
| complete, it was just idea how to resolve issue. Please, find |
| attached issue5.patch to resolve it. It can be applied on top current |
| apps/master. From Artur Madrzak (2017-05-12). |
| * Fix the new can.h header location. From Alan Carvalho de Assis |
| (2017-05-12). |
| * Fix libcanard github download link to get it compiling correctly. |
| From Alan Carvalho de Assis (2017-05-12). |
| * Fix to use the new canardInit() function. From Alan Carvalho de |
| Assis (2017-05-12). |
| * apps/platform: Create gnu/ subdirectory that contains the one and |
| only GNU C++ initialization function. Remove all other C++ |
| initialization functions (2017-05-13). |
| * Move up_cxxinitialize() prototype from nuttx/include/nuttx/arch.h to |
| apps/include/platform/cxxinitialize.h (2017-05-13). |
| * apps/examples/nettest: Fix an error in pre-processor expression |
| (2017-05-13). |
| * wireless/ieee802154: i8sak adds event handling from MAC char driver. |
| From Anthony Merlino (2017-05-16). |
| * apps/examples/mtdpart: Prevent part array overflow. mtdpart examples |
| create partions and allocate from 1 index not a 0 index to part[] |
| array. This cause buffer overflow for part array. This change fixes |
| this problem. From EunBong Song (2017-05-17). |
| * apps/examples/can: Fix can example app to print data when |
| CONFIG_EXAMPLES_CAN_READ is defined. From Alan Carvalho de Assis |
| (2017-05-17). |
| * apps/: Make more globals static to avoid name clashes. From Juha |
| Niskanen (2017-05-19). |
| * Ensure netlib will not be broken when setip will not bring the |
| network up anymore. From Sebastien Lorquet (2017-05-19). |
| * DHCPC: Remove hard-coded interface device. Now passed as a parameter |
| to dhcpc_open(). From Sebastien Lorquet (2017-05-19). |
| * nshlib: Fix a resource leak in cmd_hexdump(). From Nobutaka |
| Toyoshima (2017-05-22). |
| * wapi: add basic wapi_event_stream_extract implementation. From Simon |
| Piriou (2017-05-21). |
| * apps/system/dhcpc: Add a command to renew or establish a lease on an |
| IPv4 address (2017-05-21). |
| * apps/system/ntpc: Add a command to start or stop the NTPC daemon |
| (2017-05-21). |
| * apps/system/dhcpc: Add missing argument of fprintf (2017-05-21). |
| * apps/nshlib: Add a new option CONFIG_NSH_NETLOCAL that will suppress |
| some built in operations and will support manual configuration of a |
| wireless network (2017-05-21). |
| * apps/system/ramtest: Make stacksize and priority conigurable |
| (2017-05-22). |
| * The dedicated windows tool at tools/mkkconfig.bat uses $APPSDIR, |
| which is not a windows shell variable, and is left uninitialized, but |
| in fact should be the current directory. From Sebastien Lorquet |
| (2017-05-22). |
| |
| 7.22 2017-09-06 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/system/composite: Update to apps/system/composite assocated with |
| big changes to the composite device logic. From Frank Benkert |
| (2017-06-01). |
| * wireless/ieee802154: Modifies i8 to support running various routines. |
| From Anthony Merlino (2017-06-14). |
| * wireless/ieee802154: Rewrites i8sak to be test CLI for IEEE 802.15.4 |
| MAC layer. From Anthony Merlino (2017-06-14). |
| * NSH network initialization: Fix some ieee 802.15.4 initialization |
| logic. It should not set the saddr or panid; those cannot be |
| hard-coded but must come from the coordinator. Re-factor a function |
| that has gotten too big and too complex. Do not set the IP address |
| for 6loWPAN. The 6loWPAN stack uses IP address that derive from the |
| ieee 802.15.4 addressing and cannot be (safely) configured by the |
| user (2017-06-17). |
| * i8sak: Missing newline in fprintf output (2017-06-18). |
| * correct copy-paste typo in comments in composite_main.c From Oleg |
| Evseev (2017-06-18). |
| * Switches IEEE 802.15.4 based code to using byte arrays instead of |
| uint16_t values for short address and PAN ID. From Anthony Merlino |
| (2017-06-19). |
| * fix copy-paste typo in nsh_usbconsole.c. From Oleg Evseev |
| (2017-06-19). |
| * examples/udp: Add configurable network device name; Add option to |
| suppress network initialization which is not needed if started by NSH |
| or for 6LoWPAN (2017-06-19). |
| * nshlib: fix size of 6LoWPAN extended address (2017-06-18). |
| * examples/udp: Fix registration as a built-in program; Change some |
| naming to make room for a second target. Current one endpoint is the |
| target and one is the host. This will (eventually) allow two targets |
| to be both endpoints of the test. Change build so that both server |
| and client can be on a target, rather than one on the target one on |
| the host PC. Server IP address may not be provided on the command |
| line (2017-06-19). |
| * examples/smart: Fix some compilation errors. Obviously this test has |
| not been used in a LONG time (2017-06-20). |
| * examples/udp: Port numbers need to be configurable to work with |
| 6LoWPAN. Need to bind the client socket to a port number. This was |
| not required before so is a apparently a change in the UDP packet |
| dispatch logic (2017-06-20). |
| * ieee802154: Changes to support beacon-enabled networks. From Anthony |
| Merlino (2017-06-21). |
| * wireless/ieee802154: Adds option to make it easy to send large frame |
| for testing purposes. From Anthony Merlino (2017-06-21). |
| * examples/udp: Renaming some files to prevent name collision in |
| libapps.a. Fix naming of a configuration setting (2017-06-23). |
| * examples/nettest: Renaming some files to prevent name collision in |
| libapps.a and to prepare to support target boards on both ends of the |
| test. Separate out network initialization so that it may, |
| eventually, be used by both a target server and a target client. Fix |
| client/server naming confusion; add command line option to select the |
| server address on the target. Add support for both enpoints on |
| target boards vs. one on a target and one on the host PC |
| (2017-06-23). |
| * system/dhcpc: The DHCPC renew command did not build correctly due to |
| naming problems. Noted by Masayuki Ishikawa (2017-06-23). |
| * examples/nettest: Fixes for building with loopback device again after |
| the last changes (2017-06-23). |
| * examples/nettest: The send buffer size is now a configuration option |
| (2017-06-24). |
| * examples/udp and examples/nettest: Fix some naming collisions; |
| examples/nettest: Fix some build issues with two targets |
| (2017-06-25). |
| * ieee802154: Adds scan command. From Anthony Merlino (2017-06-25). |
| * ieee802154: Minor fix to setup logic for i8sak. From Anthony Merlino |
| (2017-06-25). |
| * ieee802154: start of scan/beacon-enabled network. From Anthony |
| Merlino (2017-06-26). |
| * netutils/telnetc: This a port of libtelnet to NuttX (2017-06-26). |
| * system/telnet: Add Telnet Chat deamon and and client from libtelent |
| (2017-06-26). |
| * NSH library: Add a Telnetd command. This is needed when network |
| initialization is deferred. In that case, telnet daemon cannot be |
| started until the network is finally initialized. The telnetd |
| command was added just for that case: So that the telnet daemon can |
| be started from the NSH command line after the network is configured |
| (2017-06-26). |
| * revise some of the state handling in the previous commit |
| (2017-06-26). |
| * system/telnet: POLL must not be disabled in configuration. Telnet |
| client port argument is no optional (2017-06-27). |
| * netutils/telnetd and users of telnetd: Add support for IPv6 |
| (2017-06-27). |
| * ieee802154/i8sak: Adds coordinfo command allowing you to poll various |
| attributes related to the coordinator. From Anthony Merlino |
| (2017-06-27). |
| * i8sak: Need to increment the next_saddr after each successful |
| association (2017-06-29). |
| * i8sak: Add a option to retry on failures to the assoc command |
| (2017-06-29). |
| * apps/examples/thttpd: Remove the netstats demo. This depends on an |
| illegal function call and cannot be supported. That example could be |
| replaced with logic that uses the procfs network entries as was done |
| for NSH which had the same issue. But I am too lazy to implement |
| that (2017-07-01). |
| * i8sak: Adds reset command to reset the MAC layer. Adds option to |
| assoc command -t to specify how long to wait for a response from the |
| Coordinator. From Anthony Merlino (2017-07-01). |
| * Eliminate a warning when both Ethernet and 6LoWPAN are enabled; |
| improve some naming (2017-05-02). |
| * ieee802154: Adds reset command, adds resp_waittime option to |
| associate, and a few other minor tweaks. From Anthony |
| Merlino(2017-07-02). |
| * NSH library: Fix build break in nsh_command.c with IPv4/IPv6 dual |
| stack. From Masayuki Ishikawa (2017-07-04). |
| * apps/examples/keypadtest: REMOVED and warehoused in the Obsoleted |
| repository. This was just a bad clone of apps/examples/hidkbd for a |
| keypad driver that was removed years ago. It also uses illegal |
| function calls into the OS. So it has no purpse: It is |
| redundant, it uses illegal interfaces, and is a test for non-existent |
| code (2017-07-04). |
| * tools/mkkconfig.bat: Use %cd% instead of %~dp0 for usage of APPSDIR |
| in this batch file (2017-07-05). |
| * system/dhcpc: Fix warning about renew_main.o appear twice in rule |
| (2017-07-05). |
| * tools/mkkconfig.bat: Remove quotes in echo. These were begin |
| Echo'ed and generating double quots in the output. From Jeff |
| (2017-07-05). |
| * Windows build fixes: tools/mkkconfig.bat - switch APPSDIR path to |
| use forward slashes for kconfig-frontends. interpreters/ficl - |
| Reorder some targets that causes GNUwin32 make to behave badly. From |
| Jeff (2017-07-06). |
| * platform/Makefile: More attempts to fix for Windows native build. |
| Backslash as a delimiter causes problems in pattern subsitutions |
| (2017-07-06). |
| * apps/examples/ipforward: Add beginning of an IP forwarding example |
| using only TUN devices. Test extended to test forwarding of ICMPv6 |
| multicast messages. Completes code for apps/examples/ipforward. |
| Still untested (2017-07-09). |
| * apps/netutils/tftpc: Missing header file causes errors in some |
| configurations (2017-07-10). |
| * Socket I/F: Cleanup for good CONFIG_NET_PKT build (2017-07-14). |
| * netutils/netlib: Fixes to work when only USRSOCK is enabled |
| (2017-07-14). |
| * apps/system/composite: Remove CDC/ACM and MSC configuration logic. |
| This belongs in the OS composite initialization. Add and argument so |
| that you can select the USB composite configuration to be attached. |
| Restore USB tracing; remove unused field in a structure. Remove |
| configuration settings that are no longer used. Fix configuration |
| selecting.. was setting the port number, not the configure ID. Also |
| add a configuration option to select the default configuration |
| (2017-07-15). |
| * apps/system/composite: Add a configuration option to the boardctl() |
| calls to support multiple composite device configurations dynamically |
| (2017-07-16). |
| * i8sak: Minor formatting fix. From Anthony Merlino (2017-07-10). |
| * wireless/ieee802154/i8sak: Minor setting changes. From Anthony |
| Merlino (2017-07-17). |
| * ieee802154/i8sak: Adds command to trigger regdump of radio. From |
| Anthony Merlino (2017-07-18). |
| * apps/system/composite: Remove references to USBMSC. There still |
| dependencies on CDC/ACM in the serial USB trace output. That really |
| should be removed (2017-08-21). |
| * netutils/ftpc: Fix some memory leaks. From Boris Astardzhiev |
| (2017-07-27). |
| * Implement powermonitor example for ltc4151 current and voltage |
| monitor. From Giorgio Groß (2017-07-28). |
| * NSH: Misc changes needed for PktRadio support (2017-07-30). |
| * examples/nettest/: Loopback option should be available in Kconfig |
| for PktRadio (2017-08-01). |
| * apps/netutils/netlib: Add support for PktRadio IOCTL commands |
| (2017-08-02). |
| * NSH library: Extend ifconfig command so that it can set variable |
| length packet radio addresss (2017-08-02). |
| * netutils/netlib: Fix netlib_nodaddrconv() so that its return type is |
| the same as other address conversion functions. NSH: Correct parsing |
| of ifconfig so that you can specify the HW address without specifying |
| the IP address (2017-08-02). |
| * apps/examples/udp: Enable testing with the broadcast address |
| (2017-08-08). |
| * Remove references to obsoleted CONFIG_NETDEV_MULTINIC and |
| CONFIG_NETDEV_MULILINK (2017-08-08). |
| * NSH library: Update addroute and delroute command. The would |
| support either IPv4 or IPv6, but not both. Allow expression of the |
| netmask in IPv4 CIDR or IPv6 slash notation. This really reduces the |
| pain of using the commands, especially for IPv6 (2017-08-10). |
| * NSH Library: Add a route command that will dump the content of |
| routing table (2017-08-11). |
| * apps/netutils/tftpc depends on CONFIG_NET_IPv4 (2017-08-12). |
| * Application.mk: Add the .PRECIOUS target to prevent libapps.a from |
| being deleted when the make is interrupted (2017-08-12). |
| * apps/examples/nximage: Remove unused global variable (2017-08-12). |
| * netutils/thttpd: Fix a malformed if condition detected by GCC 6.x.x |
| (2017-08-12). |
| * All Makefiles: Add .PRECIOUS: apps/libapps.a to every Makefile. |
| Hopefully this will end awkward problems when you Control-C out of a |
| build and libapps.a is deleted (2017-08-13). |
| * The last change added .PRECIOUS: $(BIN) to everyway Makefile in hopes |
| the libapps.a will not be deleted on Control-C (unproven so far). |
| However, $(BIN) may contain back slashes in some build platforms and |
| that causes problems for make: It can't handle the backslashes in |
| the .PRECIOUS dependency list. $(BIN) replaced with ../../libapp.a, |
| where the number of ../ depends on the depth of the Makefile in the |
| apps/ source tree (2017-08-13). |
| * netutils/netlib: Add a helper to decode short addresses |
| (2017-08-18). |
| * apps/examples/pf_ieee802154: Add for testing PF_IEEE802154 sockets. |
| Add PANID to command line options; Cannot bind to address zero... |
| There is no counterpart to INADDR_ANY for these radios (not now at |
| least) (2017-08-19). |
| * Changes to netlib and nsh so that you build build with PF_IEEE802154 |
| enabled and 6LoWPAN disabled (2017-08-20). |
| * netutils/netlib: If only PF_IEEE802154 socket family is enabled, then |
| must use SOCK_DGRAM (2017-08-21). |
| * NSH: Add conditions so that ifconfig and ifup will not be disabled |
| if we are using only PF_IEEE802154 (2017-08-21). |
| * dhcpd: Prevent buffer overflow in dhcpd_addoption. offset represents |
| distance from start of option buffer. So this should be changed |
| current option pointer minus start of buffer. From EunBong Song |
| (2017-08-25). |
| * apps/examples/nsh: Remove APPNAME, PRIORITY, and STACKSIZE settings |
| from Makefile to avoid showing nsh in Builtin Apps. From Masayuki |
| Ishikawa (2017-08-26). |
| * examples: add DAC example. From Juha Niskanen (2017-09-1). |
| |
| 7.23 2017-12-04 Gregory Nutt <gnutt@nuttx.org> |
| |
| * examples/ostest: sem_open() now returns SEM_FAILED in the event of a |
| failure (2017-09-08). |
| * examples/adc: Fix g_adcstate.count initialization. From Masayuki |
| Ishikawa (2017-09-11). |
| * examples/fb: Flesh out the framebuffer driver test. examples/fb: |
| Add a simple test for the framebuffer character driver. This initial |
| commit just verfies some interfaces and initialization logic. Still |
| need to add to graphics update logic (2017-09-12). |
| * Rename CONFIG_AUDIO_DEVICES to CONFIG_DRIVERS_AUDIO to conform better |
| to the evolving configuration naming standard (2017-09-12). |
| * examples/fb: Extend test to include 1-bpp monochrome (2017-09-13). |
| * Added a simple reader example for the LIS3DSH acceleration sensor on |
| STM32F4Discovery. From Florian Olbrich (2017-09-14). |
| * wireless/ieee802154/i8sak: Adds socket interface support. You can now |
| use both socket or char driver to control the MAC layer. From Anthony |
| Merlino (2017-09-15). |
| * wireless/ieee802154/i8sak: Fixes several bugs. Adds sniffer port |
| option and a few other get/set parameters. From Anthony Merlino |
| (2017-09-15). |
| * i8sak: Updates README to include details about socket interface and |
| new addressing setup and fixes warning. Fix warning about |
| uninitialized variable. From Anthony Merlino (2017-09-15). |
| * apps/examples/apa102: Add a Rainbow example for APA102 LED Strip. |
| From Alan Carvalho de Assis (2017-09-18). |
| * netutils/netlib: Add netlib_ipv6adaptor() and netlib_ipv4adaptor() |
| (2017-09-19). |
| * netlib_ipv[4|6]adaptor: Add a check to handle the case where the |
| network device configuration changed asynchronously and the second IOCTL |
| returns more data than the allocated buffer (2017-09-20). |
| * apps/netutils/netlib: Add helpers for reading the routing table: |
| netlib_read_ipv4route() and netlib_read_ipv6route() (2017-09-20). |
| * apps/netutils/netlib: Add new utilities netlib_ipv[4|6]router() that |
| can be used to determine the IP address of a router that would be used |
| some some destination IP address that is not locally accessible |
| (2017-09-20). |
| * apps/netutils/netlib: netlib_ipv[4|6]adaptor() will now use the new |
| routing table interfaces if they are available: If the destination IP |
| address does not correspond to the network served by any device, then |
| the address of the router that should get us to the correct sub-net is |
| is determined. Then the network adaptor that can communicate with the |
| that router has the IP address that will returned (2017-09-20). |
| * apps/examples/flowc: Add a simple test of serial hardware flow control |
| (2017-09-23). |
| * apps/examples/qencode: The QENCODER name was changed to |
| SENSORS_QENCODER fix it here. From Alan Carvalho de Assis (2017-09-24). |
| * nshlib/nsh_parse.c: Avoid truncating the strcmp result into a unsigned |
| char variable. nshlib/nsh_netcmds.c: Check for valid hostip before |
| using it. nshlib/nsh_ddcmd.c: Fix resouce leak when 'if=' or 'of=' |
| params are repeated in the command line. For example: |
| - dd if=/dev/null if=/dev/zero of=/dev/null or |
| - dd if=/dev/zero of=/dev/zero of=/dev/null |
| From Bruno Herrera (2017-09-25). |
| * nshlib/nsh_netcmds.c: Fix a compilation error when IPv4/IPv6 dual |
| stack is enabled. From Masayuki Ishikawa (2017-09-26). |
| * apps/examples/flowc: Add a delay between received packets in order to |
| force input flow control (2017-09-26). |
| * apps/examples/flowc: Fix some errors in receiver's verificationg |
| logic. Add a 'canned' data file so that we don't need to deal with the |
| sender program; we can just 'cat' the canned data file (2017-09-26). |
| * apps/examples/flowc: Add some syslog output to flush the syslog |
| interrupt buffer (2017-09-27). |
| * apps/examples/flowc: Small improvement to break line if more than 80 . |
| were printed. From Alan Carvalho de Assis (2017-09-27). |
| * apps/examples: In elf and nxflat examples, remove low-level |
| interfaces and replace with call to exec() (2017-10-02). |
| * examples/elf and nxff: Won't build with CONFIG_BUILD_KERNEL because |
| the interface exec() is not available in that configuration. Also, |
| remove a stray comma and a stray semacolon in examples/pty_test/Kconfig |
| and examples/random/Kconfig (2017-10-06). |
| * Add powerled driver example. From Mateusz Szafoni (2017-10-08). |
| * examples/ostest: Works around a bug in printf() when cancellation |
| points are enabled. printf() is a cancellation point because it calls |
| write(). This is correct according to OpenGroup.org. However, printf |
| holds the stdio library semaphore when it is canceled and this leaves |
| the semaphore in a bad state. No fix for the printf bug yet (2017-10-10). |
| * examples/ina219: A simple infinite loop that polls the INA219 sensor |
| and displays the measurements. From Sebastien Lorquet (2017-10-11). |
| * examples/ostest: Extend cancellation test to make sure that cancelable |
| threads waiting on a message queue or on a signal can be canceled |
| (2017-10-12). |
| * netutils/ftpc: Fix some crazy comparisons to determine is a file is |
| an absolute path. Noted by Anthony Merlino (2017-10-13). |
| * examples/nx: The NX example no longer supports single user mode |
| (2017-10-14). |
| * examples/nxtext: The nxtext example no longer supports single user |
| mode (2017-10-14). |
| * examples/lcdrw: Remove this example. It violates the portable OS |
| interface and cannot be retained (2017-10-14). |
| * graphics/traveler: Restore most of what was removed in the previous |
| commit. That non-standard logic is currently needed by the simulation. |
| It should be replaced with use of a framebuffer driver. No longer |
| supports single user graphics mode (2017-10-14). |
| * examples/nxhello now supports only multiuser mode (2017-10-14). |
| * examples/nximage now supports only multiuser mode (2017-10-14). |
| * system/lm75: Fix a naming error in a dependency. From Alan Carvalho |
| de Assis (2017-10-14). |
| * examples/nxlines now supports only multiuser mode (2017-10-14). |
| * exampls/nxhello: Increase the amount of time that the text is |
| displayed before erasing it (2017-10-15). |
| * Add -n samples to lm75 app and replace Centigrade with Celsius. From |
| Alan Carvalho de Assis (2017-10-15). |
| * graphics/traveler: Convert to use the framebuffer driver (2017-10-16). |
| * examples/alarm: add options for reading alarm value and canceling it. |
| From Juha Niskanen (2017-10-17). |
| * apps/fsutils/mkfatfs: Move mkfatfs from the OS to here. Not fully |
| integrated on the intial commit (2017-10-20). |
| * apps/examples/adps9960: Add ADPS-9960 example. From Alan Carvalho de |
| Assis (2017-10-23). |
| * This commit eliminates the ping command from NSH and replaces it with |
| a ping 'built-in' at apps/system/ping. The original NSH version of ping |
| violated the portable POSIX interface and, hence, had to be removed. |
| The new system/ping command uses the new IPPROTO_ICMP AF_INET datagram |
| sockets to implement ping (2017-10-23). |
| * apps/system/ping6: Use inet_ntop() to improve the appearance of the |
| ping6 IPv6 address output. Fix a typo and also a place where = used |
| when == intended. This commit removes the ping6 command from NSH and |
| replaces it with the apps/system/ping6 built-in command. The NSH ping6 |
| command had to be removed because it violated the portable POSIX OS |
| interface. The apps/system/ping6 command uses the sem-standard |
| IPPROTO_ICMP6 socket interface (2017-10-24). |
| * apps/nshlib: ifconfig improvements. From Anthony Merlino (2017-10-24). |
| * nshlib: mount command no long uses the non-standard OS interface |
| foreach_mountpoint(). Now simply cats /proc/fs/mount when there are no |
| arguments to the mount command (2017-10-26). |
| * nshlib: df command no long uses the non-standard OS interface |
| foreach_mountpoint(). Now simply cats /proc/fs/blocks or /proc/fs/usage |
| (2017-10-26). |
| * Fix parsing of empty strings when CONFIG_NSH_CMDPARMS is not defined. |
| Problem noted by Juha Niskanen (2017-10-27). |
| * apps/canutils/libobd2: Add libobd2 for NuttX. From Alan Carvalho de |
| Assis (2017-10-28). |
| * apps/examples/obd2: Add OBD2 example application. From Alan Carvalho |
| de Assis (2017-10-28). |
| * include/netutils/netlib.h: Broaden socket definitions of previous |
| commit. Add definitions needed when only local Unix domain sockets are |
| supported (2017-10-30). |
| * apps/examples/userfs: Add a test case for verifying UserFS |
| (2017-10-31). |
| * Fixed i2ctool write operation in `no restart` mode (flag `-n`). It |
| seems that I2C driver has changed a bit since i2ctool was written, so |
| now i2ctool sends repeated start even if `no restart` flag (-n) was |
| passed to it. From Dmitriy Linikov (2017-11-01). |
| * Fixed misprint in cmd_wget. From Dmitriy Linikov (2017-11-01). |
| * apps/examples/userfs: Fix bad logic in test stat() implementation |
| (2017-11-01). |
| * i8sak: Changes 'notif' to 'primitive' corresponding to the changes in |
| the Kernel. From Anthony Merlino (2017-11-01). |
| * Adds i8shark, a sniffer "adapter" that captures all 802.15.4 traffic, |
| packages it into a Wireshark ZEP packet, and sends it to a host running |
| Wireshark From Anthony Merlino (2017-11-01). |
| * apps/examples/userfs: Fix check for open with write+append mode |
| (2017-11-01). |
| * apps/fsutils/mkfatfs: When fsutils/mkfats was split off from the |
| operating system, there were a few dangling things left. Some |
| references to functions in the OS (which are not available in the |
| protected and kernel modes) and several types and function prototeypes |
| that don't exist is apps/fsutils/mkfatfs (2017-11-02). |
| * Fixed the compilation of nsh_routecmds.c, broken after commit |
| 6b9d23c6aa0247c701acf1d0ecdaececf546342a. From Dmitriy Linikov |
| (2017-11-03). |
| * include/netutils/netlib.h: In order to avoid pre-processing warnings, |
| NETLIB_SOCK_FAMILY must always be assigned a value, even if there is no |
| real meaning value for it (2017-11-03). |
| * i8sak: Channel setting is now saved locally, so when performing a |
| startpan or assoc, the channel previously set is still used, even though |
| the MAC layer gets reset. Also fixes a few build issues. From Anthony |
| Merlino (2017-11-03). |
| * examples: add SMPS driver example. From Mateusz Szafoni (2017-11-05). |
| * smps, powerled examples: fix floating point format in printf. From |
| Mateusz Szafoni (2017-11-05). |
| * apps/examples/userfs: Handle the O_TRUNC open flag. Fixes a bug with |
| double freeing open data when dup'ed files are closed (2017-11-06). |
| * apps/examples/ltdc: Remove apps/examples/ltdc. It violates the |
| portable POSIX interface by calling directly into OS code (2017-11-06). |
| * FTP: Adds support for IPv6 and fixes various transfer issues. From |
| Anthony Merlino (2017-11-06). |
| * netutils/ftpc: Eliminate warnings about types of inputs to |
| netlib_ipv4adaptr() and about ftp_cmd_pasv() being defined but not used |
| (2017-11-12). |
| * apps/system/free: Removed because it violates the portable POSIX OS |
| interface (2017-11-13). |
| * apps/nshlib: The free commands no longer used mallinfo() to get the |
| state of the use heap. Two reasons: That is not useful information in |
| the kernel build. And (2) there are other memory resources of interest |
| in other configurations such as the Kernel heap in PROTECTED and KERNEL |
| builds, and the prog mem uses when FLASH is used to hold modifiable |
| data. The free command has been extended to just dump the content of |
| procfs entries and to include all of these other memory resources of the |
| procfs entries are available (2017-11-13). |
| * apps/nshlib: Big simplification of last change. /proc/kmm, umm, and |
| progmem have been replaced with a single procfs file called |
| /proc/meminfo. The NSH free command now degenerates to a simple dump of |
| /proc/meminfo (2017-11-13). |
| * apps/graphics/pdcurs34: This commit brings the basic public domain |
| pdcurses library into NuttX. This library is complete but not yet |
| usuable because it still requires the NuttX interfacing code needed hook |
| pdcurses into the NuttX graphics drivers. Also test cases are needed to |
| verify the pdcurses integration (2017-11-17). |
| * apps/examples/pdcurses: Bring in pdcurses demos and make them conform |
| to the NuttX coding style (not yet hooked into the build system) |
| (2017-11-18). |
| * apps/graphics/pdcurs34: Extend configuration to select the font size |
| (2017-11-18). |
| * apps/example/pdcurses: Add logic to build one of the several pdcurses |
| demo/test programs (2017-11-18). |
| * apps/graphics/pdcurs34/nuttx: Completes first cut at framebuffer |
| rendering logic. Add NuttX framebuffer color managment and beginning of |
| some rendering logic (2017-11-19). |
| * apps/examples/pdcurses/: Fix a few more bugs found in testing; Brings |
| in the remaining pdcurses demo programs (2017-11-19). |
| * apps/graphics/pdcurs34: Add support for discrete joystick input. |
| This is sufficient to get through all menuing tests that do not require |
| text input (2017-11-22). |
| * apps/graphics/pdcurs34: Add support for greylevels vs. RGB. Define |
| pdc_color_t based on pixel depth, not on specific color format. Need to |
| set the global COLORS or else all displays on monochrome (2017-11-22). |
| * i8shark: Adds CONFIG_IEEE802154_I8SHARK_XBEE_APPHDR option to remove |
| XBee's application header before sending to Wireshark. This option will |
| corrupt any traffic received that does not include this application |
| header. From Anthony Merlino (2017-11-22). |
| * apps/wireless/ieee802154/i8sak: Adds ability to get/set rxonidle |
| setting for MAC layer. From Anthony Merlino (2017-11-xx). |
| * apps/examples/fb: Fix calculation of a mask value (2017-11-22). |
| * NxWidgets: Move from apps/NxWidgts to apps/graphics/NxWidgets |
| (2017-11-24). |
| * apps/examples/pdcurses: Add a very simple example that just shows the |
| entire character set (7-bit only). It adapts to the size of the |
| framebuffer and, hence, can be used with very tiny displays. In fact it |
| looks really dumb on big displays (2017-11-24). |
| * apps/examples/fb: Add a small delay between updating each rectangular |
| region (2017-11-25). |
| * apps/examples: CONFIG_QENCODER was renamed to CONFIG_SENSORS_QENCODER: |
| update README.txt. From Fabio D'Urso (2017-11-25). |
| * apps/graphics/pdcurs34: Initial steps to support less than 8-pixel |
| fonts on less than 8-bit display. Calculation of font buffer stride |
| must depend on the configured BPP. Add first cut at function to copy a |
| font into the font buffer; Make better use of macros to reduce code |
| complexity (2017-11-27). |
| * apps/examples/nunchuck: Add Nunchuck example application. From Alan |
| Carvalho de Assis (2017-11-28). |
| * apps/graphics/pdcurs34: Correct logic that sets the font buffer to |
| the background color for the case of BPP < 8 (2017-11-29). |
| * apps/examples/pdcurses: Clean up charset example so that the display |
| geomtry is better on very wide displays (wide with respect to the width |
| of a character) (2017-11-30). |
| |
| 7.24 2018-03-02 Gregory Nutt <gnutt@nuttx.org> |
| |
| * i8shark: Fixes special XBee compensation by purposely chopping off the |
| FCS. From Anthony Merlino (2017-12-08). |
| * nxplayer: Add support for http streaming in nxplayer. From Masayuki |
| Ishikawa (2017-12-19). |
| * Adds 'setlogmask' application that allows you to set the syslog |
| priority via a simple command. From Anthony Merlino (2017-12-19). |
| * apps/netutils/ftpc: Fix some cornercases that could cause FTP to |
| access past the end of valid data. From Gregory Nutt (2017-12-21). |
| * examples/userfs: Add truncate() support for userfs. From Gregory Nutt |
| (2018-01-03). |
| * apps/nshlib: Add support for a truncate command. This will be used |
| to test the new ftruncate file system support. From Gregory Nutt |
| (2018-01-04). |
| * nshlib/nsh_telnetd.c: Add support for telnet character mode. From |
| Masayuki Ishikawa (2018-01-10). |
| * apps/nshlib: Add support for '-n' option to the echo command. From |
| Masayuki Ishikawa (2018-01-10). |
| * apps/nshlib: Add irqinfo command. From Gregory Nutt (2018-01-12). |
| * apps/system/usbmsc: Added Kconfig options to configure write |
| protection for each LUN. From Fabio D'Urso (2018-01-14). |
| * apps/examples/lvgldemo: Add lvgldemo example. From Alan Carvalho |
| de Assis (2018-01-16). |
| * apps/graphics/littlevgl: Add littlevgl library. From Alan Carvalho |
| de Assis (2018-01-16). |
| * apps/examples/touchscreen: Eliminate BOARDIOC_TSCTEST_SETUP. From |
| Gregory Nutt (2018-01-17). |
| * apps/examples/lvgldemo: Can no longer call boardctl() to initialize |
| graphics hardware if needed. From Gregory Nutt (2018-01-18). |
| * apps/netutils/netlib: Add default route in netlib_set_dripv4addr(). |
| From Masayuki Ishikawa (2018-01-19). |
| * system/stackmonitor: Re-design the stack monitor so that it does not |
| make forbidden calls directly into the OS, breaking the portable POSIX |
| OS interface. It now properly uses the PROCFS file system to glean |
| information about stack usage. From Gregory Nutt (2018-01-20). |
| * apps/nshlib: Fix compile error when CONFIG_NSH_DISABLESCRIPT is not |
| defined. The field np_flags does not exist if scripting is disabled. |
| From Gregory Nutt (2018-01-22). |
| * apps/examples/veml6070: Add VEML6070 Application Example. From Alan |
| Carvalho de Assis (2018-01-28). |
| * examples/bmp180: Add BMP180 application example. From Alan Carvalho |
| de Assis (2018-02-04). |
| * apps/graphics/ft80x: Add the FTDU FT80x GUI support library. |
| Consists of some dispaly list helpers, audio helpers, touch helpers, RAM |
| access, register access etc. From Gregory Nutt (2018-02-18). |
| * apps/examples/ft80x: Add a test of the FT80x based on FTDI |
| SampleApp. Includes tests of GPU primitives and graphics co-processor |
| commands From Gregory Nutt (2018-02-18). |
| * apps/graphics/ft80x and apps/examples/ft80x: Fix a few compile-relate |
| issues introduced with last merge. From Gregory Nutt (2018-02-19). |
| * apps/examples/ft80x: Add a few more demos of GPU primitive |
| operations. From Gregory Nutt (2018-02-19). |
| * Added ECANCELED condition to DEBUGASSERT-s checking sem_wait result. |
| From Dmitriy Linikov (2018-02-20). |
| |
| 7.25 2018-06-03 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/netutils/tftpc: This commit modifies the TFTP client functions to |
| use a data read/write callback instead of a file. This allows TFTP to |
| write to arbitrary destination (in my case, a MTD device - for firmware |
| update). Two new functions are introduced for this, named tftpget_cb and |
| tftpput_cb. They are just made of most of the existing code. The |
| previously existing tftpget/tftpput functions are now wrappers on the new |
| ones, with callbacks that read/write from files, so my modifications are |
| backwards compatible with existing applications, eg the associated nsh |
| commands dont need to be changed. From Sebastien Lorquet (2018-03-09). |
| * apps/examples/ft80x: Fix some size calculations. Add option to disable |
| primitive tests... just too boring to have to watch over and over again. |
| Fix a typo in backlight fade logic; Fix error in formatted display light |
| debug dump output. From Gregory Nutt (2018-03-09). |
| * apps/examples/ft80x: Text is handled by the coprocessor and, hence, must |
| use RAM_CMD, not RAM_DL. From Gregory Nutt (2018-03-09). |
| * apps/examples/ft80x: Fix some errors in co-processor demos. Correct an |
| error in the spinner demo. From Gregory Nutt (2018-03-10). |
| * apps/examples/netloop: Update network loopback example so that it can be |
| used to test TCP KeepAlive. From Gregory Nutt (2018-03-12). |
| * apps/system/stackmonitor: Fix comparison between pointer and zero |
| character constant. From Juha Niskanen (2018-03-13). |
| * apps/system and wireless: Applications should use the standard clock() |
| interface, not the internal NuttX clock_systimer() interface. From |
| Gregory Nutt (2018-03-14). |
| * apps/examples/lzf: Add the test case from Marc Alexander Lehmann's |
| LIBLZF3.6 librrary From Boris Astardzhiev (2018-03-14). |
| * apps/examples/lzf: lzf_compress() now expects the hash table as user |
| allocated input parmeter rather than declaring the huge array on the |
| stack. From Gregory Nutt (2018-03-15). |
| * apps/examples/lzf: unlzf and lzcat are not supported. From Gregory Nutt |
| (2018-03-15). |
| * apps/examples/lzf: Fix name composition and set defaults early in main. |
| From Boris Astardzhiev (2018-03-15). |
| * apps/examples/nsh and posix_spawn: Must not call exec_setsymtab() |
| directly. That is a non-POSIX internal OS interface. From Gregory Nutt |
| (2018-03-16). |
| * apps/system/lzf: Move the LZF tool from apps/examples/ to apps/system. |
| From Gregory Nutt (2018-03-16). |
| * apps/system/lzf: Don't build the LZF tool if the LZF library is not |
| enabled. From Gregory Nutt (2018-03-16). |
| * apps/system/lzf: Refactor so that the user is no longer required to |
| generate the LZF header From Boris Astardzhiev (2018-03-16). |
| * apps/system/lzf: (1) The maximum block size is now configuration setting |
| in order to give finer control over memory usage. (2) The |
| compression/decompression buffers have been moved out the stack and are |
| now global variables. This eliminates the need to set large stack sizes |
| to use this utility. (3) Added semaphore protection of all global |
| variables for the case of the FLAT or PROTECTED builds. Unlike the |
| KERNEL build, the same global variables will be used by each instance of |
| the LZF utility. If you want thread safety, then you must either (a) |
| serialize all access to the global variables, or (b) pack the global |
| variables into a structure and allocate that structure on each execution |
| of lzf_main(). From Gregory Nutt (2018-03-17). |
| * apps/examples/cromfs: Add an example of how to build a CROMFS file |
| system image. From Gregory Nutt (2018-03-20). |
| * Remove canutils/libuavcan and examples/uavcan. libuavcan has not built |
| for a year or so. The basic problem is that as NuttX advances, the old |
| frozen version of libuavcan has become absolute because it violates the |
| portable POSIX OS interface. No one is maintaining the port so there is |
| no alternative but to remove it. From Gregory Nutt (2018-03-23). |
| * apps/examples/elf: Extend the ELF program module demo so that you can |
| use compressed ELF programs with CROMFS. From Gregory Nutt (2018-03-24). |
| * apps/examples/elf: Use strip command to make ELF binaries MUCH smaller. |
| Add an option to strip debug symbols even if the debug symbols are |
| enabled in the base code. From Gregory Nutt (2018-03-25). |
| * apps/wireless/bluetooth/btsak: Add a Bluetooth debugt tool. From |
| Gregory Nutt (2018-04-02). |
| * apps/netutils/netlib: Various fixes needed to get a clean netlib build |
| with Bluetooth only. From Gregory Nutt (2018-04-03). |
| * apps/examples/cc3000: Remove the CC3000 example. From Alan Carvalho de |
| Assis (2018-04-04). |
| * apps/examples/smps: Fix typos in Kconfig. All power, voltage, current |
| values were strings with no default. I assume they should be 'int' with |
| what default? From Gregory Nutt (2018-04-04). |
| * examples/powerled: Add arch initialization; examples/smps: fixes in some |
| printf and in Kconfig From Mateusz Szafoni (2018-04-07). |
| * apps/examples/adxl372_test and lxm330spi_test: Add ADXL372 and LSM330 |
| tests. From Bob Feretich (2018-04-09). |
| * apps/examples/max31855: Add an example to read multiple max31855 sensors |
| From Tiago Almeida (2018-04-09). |
| * apps/examples/ostest: Do not call AIO test without |
| CONFIG_EXAMPLES_OSTEST_AIO From Juha Niskanen (2018-04-11). |
| * apps/examples/nxdemo: Add nxdemo application From Alan Carvalho de |
| Assis (2018-04-28). |
| * apps/system/embedlog: Support for embedlog data loggin package from |
| https://embedlog.kurwinet.pl/ From Michal Lyszczek (2018-05-06). |
| * nshlib/nsh_fscmds.c: Add the mkfatfs -r option which can be used to |
| specify the number of entries in the FAT12/FAT16 root directory. From |
| Boris Astardzhiev (2018-05-11). |
| * apps/system/zmodem: Add an option to enable hardware flow control via |
| termios. Fix Makefile.host. It was broken when zmodem.h was moved to |
| apps/include/system. Fix an incompatibility with the way that CRCs are |
| calculated. Allow stack size and priority to be configured. From |
| Gregory Nutt (2018-05-27). |
| * apps/system/zmodem: Call tcflush() before closing the serial port. This |
| is necessary because that close operation may hang if hardware flow |
| control is enabled. Consider this scenario: After the host sz runs on |
| the host, it exits and leaves CTS high. The target rz completes, and |
| tries to close the serial port. But if there is buffered Tx data, then |
| the close will hang when it tries to drain the buffered Tx data since |
| there is no where it can go. tcflush() discards the buffered data and |
| permits the close to continue. There is additional logic in |
| nuttx/drivers/serial needed to work with this. From Gregory Nutt |
| (2018-05-27). |
| * apps/, Various Makefiles: Fix mixed references to nuttx/lib. These need |
| to be changed to nuttx/staging. From Gregory Nutt (2018-05-30). |
| * Various fixes necessary to build the simulator under MSYS1. From Gregory |
| Nutt (2018-05-31). |
| * apps/Makefile and platform/Makefile: At clean_context targets that are |
| now invoked from the main nuttx/Makefile. From Gregory Nutt (2018-05-31). |
| |
| 7.26 2018-09-08 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/netutils/ftpc: Fix handling of url-encoded strings From |
| Dmitriy Linikov (2018-06-04). |
| * apps/examples/i2sloop: Add i2sloop application. This application |
| can be used to test I2S loopback like: nsh> i2sloop & |
| From Masayuki Ishikawa (2018-06-06). |
| * nsh_parse.c: fix 'while' and 'until' loop condition |
| The loop condition logic was inverted: while true; do echo "test"; |
| done |
| would exit immediately, while using 'until' would stay in the loop. |
| This is the opposite of how it is supposed to work. |
| The reason is that 'state' was set wrong because 'whilematch' is a |
| bool. From Beat Küng (2018-06-06). |
| * examples: Adds example to test framebuffer overlay From Marco Krahl |
| (2018-06-06). |
| * apps/examples/ostest: Signal handling tests should use the same |
| configurable stack size as used in other tests, not |
| PTHREAD_STACK_DEFAULT. From Gregory Nutt (2018-06-07). |
| * apps/system/taskset: Add taskset command for SMP systems. This |
| command can be used to retrieve or set a process's CPU affinity. |
| For example, |
| |
| nsh> taskset -p 4 |
| pid 4's current affinity mask: 2 |
| |
| nsh> taskset -p 3 4 |
| pid 4's current affinity mask: 3 |
| |
| nsh> taskset -p 1 busyloop & |
| |
| From Masayuki Ishikawa (2018-06-08). |
| * apps/gpsutils/minmea: Include wchar.h in minmea.c file to fix wint_t |
| error From Alan Carvalho de Assis (2018-06-09). |
| * apps/examples/gps: Add GPS example using MINMEA lib From Alan |
| Carvalho de Assis (2018-06-09). |
| * apps/Make.defs: Fix an error introduced with recent chagne. |
| MKKCONFIG may not be defined resulting in failure to create |
| apps/Kconfig. From Gregory Nutt (2018-06-11). |
| * examples/powerled: add arch initialization; examples/smps: fixes in |
| some printf and in Kconfig |
| testing: add Unity - unit testing library from ThrowTheSwitch.org |
| From Mateusz Szafoni (2018-06-15). |
| * apps/wireless/wapi: Remove dependency on CONFIG_EXPERIMENTAL from |
| Kconfig From Gregory Nutt (2018-06-17). |
| * Remove apps/interpreters/micropthon. There are several reasons for |
| this. (1) the current version 1.3.8 is very old and no one is |
| supporting it. (2) the port only includes the core micropython logic |
| and none of the Python libraries. As such it is useless in any real |
| application. (3) There have recently been compile failures |
| reported. It looks like this is due to changes in newlib based |
| toolchains that now bring in incompatible newlib header files. See |
| issue 104 at |
| https://bitbucket.org/nuttx/nuttx/issues/104/build-micropython-138-error. |
| With no one dedicated to the support of micropython, it can no longer |
| be carried in the NuttX apps/ repository. From Gregory Nutt |
| (2018-06-18). |
| * apps/nshlib/README.txt: Clarify arguments to the mkrd command. From |
| Gregory Nutt (2018-06-22). |
| * testing/unity: add configuration options for exclude setjmp and |
| output color From Mateusz Szafoni (2018-06-23). |
| * apps/netutils/dhcpc: Activates BINDTODEVICE if available, and break |
| up some long lines From Gregory Nutt (2018-06-25). |
| * apps/examples/tcpblaster: Add TCP performance measurement test. |
| From Gregory Nutt (2018-07-05). |
| * apps/examples/dsptest: Add unit test for Nuttx DSP library From |
| Mateusz Szafoni (2018-07-07). |
| * apps/examples/helloxx: Add main() for CONFIG_BUILD_KERNEL From |
| Masayuki Ishikawa (2018-07-13). |
| * apps/examples/nsh: Add logic to automatically register an |
| application symbol table as part of NSH initialization. From |
| Masayuki Ishikawa (2018-07-13). |
| * There many occurrences of the global variable g_exports and the |
| opportunity for collisions. Make the global variable names unique. |
| From Gregory Nutt (2018-07-14). |
| * apps/examples/nsh: The symbol table name and size variable names can |
| now be configured. From Gregory Nutt (2018-07-14). |
| * import/: Add Makefile.symtab which can be used to compile the |
| dynamically created symbol table C file. Add tools/mksymtab.sh. |
| From Gregory Nutt (2018-07-15). |
| * apps/tools: Add +x to mksymtab.sh. |
| apps/examples/nsh: Fix compile errors with |
| CONFIG_EXAMPLES_NSH_SYMTAB=y From Masayuki Ishikawa (2018-07-17). |
| * apps Makesystem: Fix an error when building apps/ without nuttx/, |
| using only the NuttX export package and assuming that the nuttx/ |
| directory in not even present. In this case, the problem fixed where |
| the apps/Make.defs file was selecting tools from the /tools directory |
| which does not exist because TOPDIR=apps/import. Instead, for this |
| build case, I have not thought of any option but to duplicate scripts |
| as necessary in the apps/tools directory. Also added a top-level |
| target to compile the symbol table. Misc fixes: quoting in scripts, |
| some errors in script syntax. From Gregory Nutt (2018-07-17). |
| * apps/tools: Fix an error in mksymtab.sh From Masayuki Ishikawa |
| (2018-07-19). |
| * examples/lvgldemo/ and graphics/littlevgl/: Update LVGL to version |
| 5.1.1 From Alan Carvalho de Assis (2018-07-19). |
| * fs/fat: Clean up some name BS_ and MBR_ refer to the same record and |
| should use the same naming (MBR_). From Gregory Nutt (2018-07-22). |
| * Add definitions for the FAT boot record (FBR). From Gregory Nutt |
| (2018-07-22). |
| * nxplayer: Refactor nxplayer.c. Apply netlib_parsehttpurl() and |
| remove unnecessary usleep(). From Masayuki Ishikawa (2018-07-31). |
| * apps/system/i2c: Adapt to rename I2C_M_RESTART->i2C_M_START. |
| I2C_M_NOSTOP should be in flags of first message in every write-read |
| and write-write mesage sequence. From Gregory Nutt (2018-08-03). |
| * include/netutils/netlib.h: Eliminate a warning about AF_UNSPEC and |
| AF_INET not defined. From Gregory Nutt (2018-08-03). |
| * Introduce a build system for loadable apps for nsh. |
| apps/Make.defs: Override COMPILE and COMPILEXX macros to compile |
| loadable apps. To make loadable apps, -DLOADABLE_APP is added to the |
| flags. Also, introduce ELFLD to link a lodable app. |
| apps/Application.mk: Add .build target in case of 'LOADABLE=y' which |
| is used to link a final loadable application and install the app to |
| apps/bin. |
| apps/Makefile: Add SYMTABSRC and SYMTABOBJ variables for loadable |
| apps which will be generated under the apps directory. Add |
| make_symbols target which will be called when all applications are |
| installed to generate symtab_app.c which is used for nsh to inform |
| symbol information to the NuttX kernel. If the application is |
| specified to 'm', the variable 'LOADABLE' must be defined here. Also |
| note that other variables (PRIORITY and STACKSIZE) can only be used |
| for built-in apps. |
| apps/nshlib/Kconfig: Add 'option modules' to NSH_FILE_APPS so that a |
| user can change an application configuration to tristate (y/n/m) |
| apps/examples/hello and helloxx: Apply changes to support a loadable |
| app. Makefile: Change the condition to build. By default, the |
| application is not selected (i.e. 'n'), so if other states (i.e. y/m) |
| are selected, the application will be compiled. Please note that |
| the variable 'LOADABLE' must be defined in each application Makefile |
| if you want to make a loadable app. Change the application state |
| from bool to tristate in the Kconfig file. Add LOADABLE_APP |
| condition to main(). From Gregory Nutt (2018-08-03). |
| * apps/examples/elf: CROMFS and ROMFS configuration currently only |
| usable in FLAT build. Add configuration to use ELF objects on |
| external media like SD card or USB drive instead. From Gregory Nutt |
| (2018-08-04). |
| * apps/examples/elf: If the test ELF files are on media in removable |
| media such as SD or USB FLASH, the wait until the media has been |
| installed and initialized before starting the test. From Gregory |
| Nutt (2018-08-04). |
| * apps/examples/module: Add support for CROMFS and for stripping |
| symbols from ELF module binaries. From Gregory Nutt (2018-08-05). |
| * examples/module: Add support for automounting removable media. This |
| involves a wait for the block driver to become available before |
| performing the mount. From Gregory Nutt (2018-08-05). |
| * apps/system/cle: Usage improvements including command line history |
| (taken from readline) and support for addition control characters. |
| From mst (2018-08-05). |
| * apps/nshlib: Add parsing support for back-slash quoted characters. |
| Currently only implemented properly if CONFIG_NSH_ARGCAT is also |
| selected. This commit is in response to Bitbucket Issue 11 opened by |
| Maciej Wójcik From Gregory Nutt (2018-08-06). |
| * apps/examples/module: When built in the PROTECTED or KERNEL modes, |
| the symbol table is not built by the application. That is because |
| the build will fail since the kernel module depends on internal OS |
| symbols thar are not available to the application build. With this |
| change the examples does not attempt to build the kernel symbol table |
| in these modes. Instead it just copies the kernel module symbol |
| table into the nuttx/pass1 directory where it can be build directly |
| into the OS during pass2 of the build. From Gregory Nutt (2018-08-07). |
| * nsh: add inverted logic support in the form of 'if ! <cmd>' From |
| Beat Küng (2018-08-11). |
| * apps/nshlib: I was able to cause an assertion with some typos in |
| testing the 'fi' command. Not an important thing, but this will |
| protect against the assertion. From Gregory Nutt (2018-08-11). |
| * examples/calib_udelay: Add tool for calibrating |
| CONFIG_BOARD_LOOPSPERMSEC From Juha Niskanen (2018-08-14). |
| * apps/builtin/Makefile. This commit changes apps/builtin to search |
| the registry recursively. By supporting directories, external |
| projects can install the hooks into the registry and easily clean |
| them up and reinstall if something needs to be updated. Based on an |
| idea from Anthony Merlino. From Gregory Nutt (2018-08-15). |
| * apps/system/popen: Add an implementation of the standard popen() and |
| pclose() OS interfaces. These are implemented as applications vs. |
| part of the OS because they depend on NSH. Untested on initial |
| commit. From Gregory Nutt (2018-08-17). |
| * apps/examples/popen: Add a test of popen/pclose. |
| apps/system/popen: Fix some errors found using the new popen/pclose |
| test. From Gregory Nutt (2018-08-17). |
| * apps/Application.mk: If a loadable module is generated the we need |
| to add logic to remove the loadable module in the 'make clean' |
| logic. From Gregory Nutt (2018-08-17). |
| * apps/system/system and popen: Adapt so that these can be used in the |
| KERNEL build mode. In this case, simply replace task_spawn() with |
| posix_spawn(). This depends on the existence of some environment |
| where /bin/sh exists and can be used to execute one NSH command. For |
| the case of system(), this change was more complete because it |
| previously used task_create(). Now it uses either task_spawn() or |
| posix_spawn(), depending upon the configuration. From Gregory Nutt |
| (2018-08-18). |
| * apps/system/nsh: Move apps/examples/nsh to apps/system/nsh. It has |
| become so entrenched that it is hardly an example these days. May as |
| well formalized it as a system task. From Gregory Nutt (2018-08-18). |
| * i8sak: i8sak daemon now gets shutdown if not in use. Previously, once |
| the i8sak daemon was started, by running any command, it would stay |
| running. This means that if you want to use i8sak to setup your |
| network, but then want exclusive access to the char device, or |
| network device, you have to manually shutdown the i8sak daemon. Now |
| the daemon stays active as long as required to finish any commands, |
| or stays open if a new command keeps it on, but when all work is |
| finished, it shuts down. From Anthony Merlino (2018-08-19). |
| * Remove illegal calls into OS to initialize BINFMT support. This must |
| be moved to the board initialization logic within the OS. From |
| anchao (2018-08-22). |
| * Move a copy of define.bat and sh from nuttx/tools to apps/tools so |
| that they will be available for the import build. From Gregory Nutt |
| (2018-08-22). |
| * apps/nshlib: Expand reboot and poweroff commands to include a |
| second, optional mode argument From ligd (2018-08-22). |
| * apps/system/zmodem: |
| fix error "sz_main.o: No such file or directory" |
| support -p <path> for rz to change the folder for the received file |
| switch debug output from printf to syslog |
| send the next packet for ZME_ACK in ZMS_SENDING to avoid rz on the |
| host side stuck |
| make send work reliable even without hardware flow control From |
| Xiang Xiao (2018-08-23). |
| * apps/system/system/system.c: Add 'const' to make function signature |
| compatible with OpenGroup.org From Xiang Xiao (2018-08-23). |
| * apps/system/ping and ping6: Send ID and seqno in network byte |
| order. From Xiang Xiao (2018-08-23). |
| * apps/system/ping and ping6: Change dependency in ping and ping6 |
| Kconfig. These may be implemented in users sockets and, hence, may |
| need to be avaiable even if ICMP and ICMPv6 sockets are not support. |
| From Xiang Xiao (2018-08-23). |
| * apps/system/cu/cu_main.c: (1) Protect from possible re-definition of |
| signal values, (2) Fix CU ctrl-C hand when remote core hang. From |
| ligd (2018-08-23). |
| * apps/fsutils/mksmartfs: Add a check to see if the SmartFS is already |
| formatted. apps/nshlib: Add a force flag (-f) to mksmartfs. SmartFS |
| will be formatted only if (1) the FLASH does not already hold |
| a SmartFS, or (2) the force flag is set From Xiang Xiao (2018-08-23). |
| * apps/nshlib: (1) NSH prompt string is now configurable. nsh> is still |
| the default. (2) Increase the default configuration for the maximum |
| number of command line arguments to 7 (CONFIG_NSH_MAXARGUMENTS). |
| This is needed for 'mount' with the -o option. From Xiang Xiao |
| (2018-08-23). |
| * apps/examples/module/Makefile: Correct module example build. Change |
| to LDLIBs were causing a failure due to a non-existent (any |
| unnecessary) library in this case. From Gregory Nutt (2018-08-23). |
| * apps/, most main() function: Correct CONFIG_BUILD_LOADABLE usage |
| Loadable apps/: Correct loadable symbol table generate |
| apps/system/ubloxmodem: Fix build break |
| apps/examples/ostest: start restart/waitpid/user test from main loop |
| apps/nshlib: Expand reboot and poweroff commands to include a |
| second, optional mode argument |
| An attempt to fix build issues. Does not work. |
| apps/examples/ostest: Fix some inappropriate renaming of static |
| functions introduced with recent patches. |
| apps/builtin/exec_builtin.c: Fix a error introduced by recent |
| comments. Found in build testing. |
| apps/builtin/exec_builtin.c: Try posix_spawn if builtin apps do not |
| have have an entry point. |
| apps/Application.mk: introduce MODULE config to simplify tristate(m) |
| apps/nsh: Change the nuttx shell module type to tristate |
| apps: Add loadable application support |
| script/mksymtab: Generate symbol table name by default |
| apps/builtin: Allow loadable applications can register with |
| apps/builtin. From anchao (2018-08-23). |
| * Replace all ASSERT calls to DEBUGASSERT From Xiang Xiao (2018-08-24). |
| * apps/examples/sotest and modules: With recent changes, LDLIBS is |
| initialized to bad value, at least in certain contexts. From Gregory |
| Nutt (2018-08-24). |
| * apps/nshlib: Add control-C support for terminating built-in and |
| exec'ed file tasks. From ligd (2018-08-26). |
| * apps/nshlib/Kconfig: Move 'option modules' from NSH_FILE_APPS to |
| BUILD_LOADABLE From anchao (2018-08-27). |
| * apps/system/nxplayer: Release buffer before session and release |
| semaphore in nxplayer_setvolume |
| system/nxplayer/nxplayer.c: Remove & for apb->samp reference. It is |
| already a pointer. From Xiang Xiao (2018-08-27). |
| * system/nxplayer/nxplayer.c: Add playraw command From ZhongAn |
| (2018-08-27). |
| * apps/system/nxrecorder: Add nxrecorder application From ZhongAn |
| (2018-08-27). |
| * nettest: fix typo: NET_LOOPBACK -> CONFIG_NET_LOOPBACK |
| nettest: fix compilation error. Should enable NET_SETSOCKOPT for |
| preventing compilation error. From EunBong Song (2018-08-28). |
| * apps/system/cu: SIGKILL is more appropriate that SIGINT in this |
| circustance. From Gregory Nutt (2018-08-28). |
| * apps/: Call BOARDIOC_FINALINIT after start-up script (or immediately |
| after BOARIOC_INIT is there is no start-up script). From ligd |
| (2018-08-28). |
| * apps/system/cu: Fix undefined SIGKILL if CONFIG_SIG_DEFUALT is not |
| defined. From Gregory Nutt (2018-08-29). |
| * apps/nshlib/nsh_console.c: Do not dereference NULL 'pstate' From |
| Juha Niskanen (2018-08-29). |
| * apps/system/i2c: Allow registers besides 0x00 in the dev command. |
| From akob Haufe (2018-08-30). |
| * system/i2c/i2c_main.c: Fix a backward comparison. Noted by Jakob |
| Haufe. From Gregory Nutt (2018-08-30). |
| * apps/ostest/suspend.c: Add a small test for SIGSTOP, SIGCONT, and |
| SIGKILL actions. From Gregory Nutt (2018-08-30). |
| * examples/ostest/signest.c: Attempt to make the nested signal test |
| compatible with the suspend/resume test. Some signals cannot be |
| caught when the suspend/resume configuration is in place. From |
| Gregory Nutt (2018-08-30). |
| * apps/ examples/dhtxx: Example for the DHTxx sensor. From Ouss4 |
| (2018-09-01). |
| * apps/nshlib: When using waitpid() to wait for a built-in application |
| or a file application to exit. Add the WUNTRACED options to so the |
| the waitpid() call will also be awakened if the waited-for task is |
| stopped as well. From Gregory Nutt (2018-09-02). |
| * apps/: Modification to build system: Unified application compilation |
| rules From anchao (2018-09-03). |
| * apps/: Resolve some make dependency failures. From anchao |
| (2018-09-03). |
| * apps/platform/Makefile: Fix missing dependency path in Makefile. |
| From Gregory Nutt (2018-09-03). |
| * apps/: Fix build break in case sama5d4-ek/elf configuration. Also |
| fix a patch problem in mkromfsimg.h. From anchao (2018-09-04). |
| * Application.mk: Even on Cygwin, GNU make insists that targets use |
| Unix style paths. System/progmem: Rename the install application to |
| progmem. This generates a target install: which collides with the |
| install:: target in Application.mk. From Gregory Nutt (2018-09-04). |
| * Makefile: platform/Makefile must have BIN_DIR defined on command |
| line even though it is not used. This is because in the Cygwin |
| build, the value of 'BIN_DIR' is passed to 'cygpath'. 'cygpath will |
| fail if BIN_DIR is not defined. From Gregory Nutt (2018-09-04). |
| * Makefile: Fix more places where attempts to use Unix-style paths |
| with native Windows toolchain. tools/mksymtab.sh: Add a check just |
| to prevent 'cat' of an empty file list from failing. Right not the |
| root problem is that the are not executables being built or installed |
| in the exe/ directory. That needs to be done by 'make import' but is |
| not happening. From Gregory Nutt (2018-09-04). |
| * Makefile: In the make import target for kernel build, we must make |
| all objects and populate libapps.a. Application.mk: the PROGIST |
| must be executed unconditionally to support the kernel build. From |
| Gregory Nutt (2018-09-04). |
| * Application.mk: Fix some issues when building directories such as |
| fsutils/mkfatfs that have no mainobj. In this case, the MAINSRC is |
| undefined and it would generate a bad linker command line. From |
| Gregory Nutt (2018-09-04). |
| * Application.mk: Add module install logic. Possibly only needed in |
| KERNEL build mode? Makefile: Simplify import target for KERNEL |
| build. A symbol table is not needed because the KERNEL-mode programs |
| are completely linked. Also fix missing deletion in clean and |
| distclean targets. tools/mksymtab.sh: Fix a typo introduced in |
| previous commit. From Gregory Nutt (2018-09-04). |
| * Makefile: 'make distclean' should remove the exe subdirectory That |
| target must return the directory back to the state is was in when |
| freshly cloned. Application.mk: Add logic to strip unnecessary |
| symbols after installing a module. But then I commented it out. |
| Wouldn't we want to keep the symbols if we planned to debug the |
| module? In apps/examples/elf, there is configuration option to |
| determine if the symbols should be stripped or not. Perhaps that is |
| needed here too? From Gregory Nutt (2018-09-04). |
| * Application.mk: Generate temporary name for linker object From |
| anchao (2018-09-05). |
| * netutils/ping: remove unsupported ping. netutils/ping is not |
| supported anymore. It's better to remove this folder for preventing |
| confusing. ping is supported by system/ping. From EunBong Song (2018-09-05). |
| * Application.mk: Fix to not register a builtin app when BUILD_MODULE=y |
| apps/tools: Fix to generate CONFIG_SYSTEM_NSH_SYMTAB_COUNTNAME in |
| mksymtab.sh. From Masayuki Ishikawa (2018-09-07) |
| |
| 7.27 2018-11-14 Gregory Nutt <gnutt@nuttx.org> |
| |
| * Directory.mk: Fix distclean targets of directory makefiles was not |
| removing generated Kconfig files. There is then no way to remove this |
| Kconfig files without manually deleting them one at a time. From Gregory |
| Nutt (2018-09-08). |
| * apps/examples/tcpblaster: Add an option to use poll() to pace input or |
| output. From Gregory Nutt (2018-09-10). |
| * apps/examples/tcpblaster: Select CONFIG_LIBC_FLOATINGPOINT |
| automatically. Units in output are wrong: Not Kbps bus Kb/Sec. From |
| Gregory Nutt (2018-09-10). |
| * apps/Application.mk: Fix some build issues. (1) Unable to found target |
| 'context' when CONFIG_NSH_BUILTIN_APPS disabled. (2) Unable to generate |
| multiple programs. From Chao An (2018-09-12). |
| * Fixes i8sak name. Accidentally renamed to i8ask in recent changes From |
| Anthony Merlino (2018-09-12). |
| * apps/examples/udpblaster: Add option to use poll() on output (only). |
| Also picks up some fixes to various typographical errors. From Gregory |
| Nutt (2018-09-14). |
| * Correct some network-related configuration variable names. All *_MTU |
| defines were changes to *_PKTSIZE gut that was not reflected in apps/ |
| From Gregory Nutt (2018-09-14). |
| * Combine the NxWidgets repository into the apps/ repository: |
| |
| - Remove old NxWidgets directory |
| - Merge remote-tracking branch 'NxWidgets/master' |
| - Move NxWidgets files into graphics/NxWidgets |
| - Integrate configuration/build system |
| - Fix file paths in file headers. Remove some duplicate tools. |
| - Add new NxWidgets Unit Test configuration and build logic. |
| |
| From Gregory Nutt (2018-09-15). |
| * Directory.mk: If the current directory contains a Kconfig file and |
| MENUDESC is not defined, then Directory.mk must not trash the Kconfig in |
| the current directory. From Gregory Nutt (2018-09-16). |
| * This commit moves the NxWidgets include directories into the correct |
| position in the apps/ source tree. |
| |
| - Clean-up some include path problems introduced with the previous set of |
| changes. |
| - app/include/graphics, apps/NxWidgets/UnitTests: Update include paths |
| for file in new location. |
| - apps/NxWidgets/nxwidgets and nxwm: Update include paths for file in new |
| location. |
| - apps/graphics/NxWidgets: Move nxwidgets and nxwm include/ directories |
| to apps/include/graphics |
| |
| From Gregory Nutt (2018-09-16). |
| * apps/nshlib: Correct maximum number of arguments that can be provided to |
| the mksmartfs command. From Eunbong Song (2018-09-18). |
| * apps/examples/adc/Kconfig: CONFIG_BOARDCTL_ADCTEST does not exist anymore |
| and should removed as a dependency. From Eunbong Song (2018-09-18). |
| * nshlib/, examples/: Update to show newer file system object types |
| returned by stat(). From Gregory Nutt (2018-09-22). |
| * Adapt the existing fstest example for SPIFFS: |
| |
| - examples/fstest: For SPIFFS, add garbage collection and file system |
| integrity IOCTL calls. This was to avoid running out of FLASH space |
| while running the fstest (ENOSPC=28). However, it does not work.. still |
| runs out of memory. |
| - apps/examples/fstest: Call statfs() and show state of file system on |
| each loop. |
| - apps/examples/fstest: Fix a situation where a file system under test |
| could cause the fstest to get stuck in an infinit loop. From Gregory |
| Nutt (2018-09-27). |
| * - apps/examples/fstest: Add logic to dump logic content of SPIFFS |
| - apps/examples/fstest/Kconfig: SPIFFS GC and integrity check option |
| interferes SPIFFS. Appears to corrupt the file system. Now marked |
| EXPERIMENTAL. From Gregory Nutt (2018-09-28). |
| * - apps/examples/fstest: Ignore EINTR errors while reading or writing. |
| - apps/examples/fstest: Add configuration option to customize stack |
| size. Detect when the media is full and stop writing files. Report |
| total file size. From Gregory Nutt (2018-09-29). |
| * apps/netutils/netlib/netlib_parsehttpurl.c: Correct handling of long URLs |
| as noted in Bitbucket issue #119 (in the nuttx/ repository, not the apps/ |
| repository). From Gregory Nutt (2018-09-30). |
| * apps/nshlib: Add support for the 'env' command. From Gregory Nutt |
| (2018-09-30). |
| * apps/nshlib: Add support for NSH local variables if CONFIG_NSH_VARS are |
| set. These are like environment variables but are local to NSH. The |
| importance of this is that these variables are *not* inherited when NSH |
| creates a new task. The new command 'export' was added. In this case, |
| the NSH variable will be promoted to an environment variable and will then |
| be inherited by any tasks executed by NSH. From Gregory Nutt (2018-10-01). |
| * apps/nshlib: If CONFIG_NSH_VARS=y, the NSH 'set' command with no argument |
| will list all of the local NSH variables. From Gregory Nutt (2018-10-02). |
| * i8sak: Properly shuts down event thread. From Anthony Merlino (2018-10-06). |
| * "dst" overflow protection when base64 string ends with "=" From Aleksandr |
| Vyhovanec (2018-10-19). |
| * apps/system/progmem: Remove this utility. It makes illegal direct calls |
| into the OS. From Gregory Nutt (2018-10-19). |
| * apps/examples/mlx90614: Add mlx90614 test example From Alan Carvalho de |
| Assis (2018-10-28). |
| * apps/netutils/netlib and apps/examples/igmp: Adapt to use the corrected, |
| semi-standard version of struct ip_msfilter. From Gregory Nutt |
| (2018-10-29). |
| * wireless/ieee802154/i8sak: Adds support for getting/setting transmit |
| power. From Anthony Merlino (2018-11-01). |
| * examples/mlx90614/mlx90614_main.c: Include support to change device |
| address on mlx90614 From Alan Carvalho de Assis (2018-11-02). |
| * apps/include/netutils/ipmsfilter.h: Eliminate error generated by bad |
| pre-processor logic. From Gregory Nutt (2018-11-02). |
| * apps/examples/mld: Add a test of MLD. Provides a mechanism for some |
| low-level bring-up of MLD. From Gregory Nutt (2018-11-04). |
| * apps/Makefile: Fix Windows native build patch extension. From Anatol |
| Ivanov (2018-11-05). |
| * apps/examples/ina226: Added INA226 example From Daniel P. Carvalho |
| (2018-11-05). |
| * apps/examples/mld/mld_main.c: Improve test by periodically dumping the |
| content of /proc/net/mld (if available). From Gregory Nutt (2018-11-06). |
| * apps/examples/mld: Add logic to set up the routing table before |
| attempting to send the multicast packet. From Gregory Nutt (2018-11-07). |
| * nshlib/nsh_console.c: Add fflush to nsh_consolewrite(). This resolves |
| this problem: |
| |
| > cat /dev/ttyCP & |
| > echo ls >/dev/ttyCP |
| |
| Can't get the 'ls' result immediately, because 'cat' cmd uses |
| nsh_consolewrite() and that uses fwrite with no fflush. We can get the |
| 'ls' result after type '\n', because nsh will fflush output when get |
| '\n'. From ligd (2018-11-07). |
| * nshlib/nsh_fsutils.c: nsh_catfile() should not append '\n' if the last |
| char in file is already '\n' From Xiang Xiao (2018-11-07). |
| * nshlib/nsh_netinit.c: Move call netlib_icmpv6_autoconfiguration() into |
| nsh_net_bringup() like DHCP From Xiang Xiao (2018-11-07). |
| * nshlib/nsh_envcmds.c: Fix warning g_oldpwd defined but not used |
| [-Wunused-const-variable] From Xiang Xiao (2018-11-07). |
| * apps/system/hexed/src/bfile.c: Fix memory leak From zhuyanlin |
| (2018-11-07). |
| * apps/system/i2c/i2c_get.c: Fix i2c_msg freq initialization problem. Typo |
| prevent I2C frequency initialization in a struct i2c_msg. From From: |
| dongjiuzhu (2018-11-07). |
| * apps/system/system.c: Fix warning when passing argument 6 of 'task_spawn' |
| from incompatible pointer type [-Wincompatible-pointer-types] From Xiang |
| Xiao (2018-11-07). |
| * apps/system/vi/vi.c: Do not print error if the file does not exist. From |
| anchao (2018-11-07). |
| * apps/netutils/chat and apps/examples/chat: 'constify' chat variables and |
| parameters From Xiang Xiao (2018-11-07). |
| * apps/netutils/pppd: Refine and fix pppd code. From Xiang Xiao |
| (2018-11-07). |
| * apps/examples/mld: Fix incorrect format of IPv6 Multicast address. This |
| resolves the UDP sendto() problem. From Gregory Nutt (2018-11-07). |
| * apps/: Rename BINFMT_EXEPATH to LIB_ENVPATH. From anchao (2018-11-08). |
| * apps/examples/gpio: Align with GPIO driver update From wangyanjiong |
| (2018-11-08). |
| * - system/ping/ping.c and system/ping6/ping6.c: Set optind to zero in the |
| error case |
| - system/ping/ping.c and system/ping6/ping6.c: Move all ping preparation |
| work into icmp_ping |
| - system/ping/ping.c and system/ping6/ping6.c: Support -W <timeout> and |
| -s <size> option |
| - system/ping/ping.c and system/ping6/ping6.c: Decouple the output from |
| ping logic |
| |
| From Xiang Xiao (2018-11-08). |
| * apps/system/ping and pings and apps/netutils/ping: Extract icmp ping and |
| icmpv6 ping6 logic from system/ to C-callable library in netutils/. From |
| ligd (2018-11-08). |
| * apps/examples/webserver/Kconfig: The webserver "app" allows for DHCP |
| client to be enabled. However, the Kconfig infrastructure does not contain |
| EXAMPLES_WEBSERVER_DHCPC config. |
| |
| Based on patch from "Anonymous" attached to Bitbucket Issue #130 From |
| Gregory Nutt (2018-11-08). |
| * NxWidgets improvements |
| |
| - NxWidgets: fix garbage returned when CCycleButton::getValue() is called |
| after removeAllOptions(). |
| |
| It's a bit questionable whether returning 0 here is reasonable or |
| if it would be better to assert(). But either is better than reading |
| into random memory and returning a garbage value. |
| |
| - NXWidgets CScrollingPanel: Don't draw outside the widget area. |
| |
| The port->move() function doesn't support clipping the |
| copied area to the client area, so we have to manually |
| calculate the part that can be moved without going outside |
| the widget. |
| |
| - CNxString: Add string + operator and ::format() function |
| |
| - CNumericEdit: Add option to include unit name after the value |
| |
| - NxWidgets: CNxWidget: Make useWidgetStyle() public |
| |
| Makes it easier to update styles when multiple controls are nested. |
| |
| - NxWidgets: Add CLabelGrid control for displaying text in grid format. |
| |
| From Petteri Aimonen (2018-11-09). |
| * apps/system/ping6: Remove NET_USRSOCK from Kconfig dependence list From |
| Xiang Xiao (2018-11-09). |
| * graphics/NxWidgets/nxwidgets/src/clabelgrid.cxx: Change old-style dbg() |
| to current ginfo(). From Gregory Nutt (2018-11-09). |
| |
| 7.28 2019-01-19 Gregory Nutt <gnutt@nuttx.org> |
| |
| * netutils/webserver: The webserver/httpd app is currently broken when script |
| support is enabled (CONFIG_NETUTILS_HTTPD_SCRIPT_DISABLE). The root cause |
| has been tracked down to the "Content-length" not being available ahead of |
| time in this case (length of -1 passed to send_headers() ). On the other |
| hand, the server closing the socket does not result in FIN being sent |
| to the browser either (FIN not supported by NuttX yet). |
| |
| Simple solution: Add support for HTTP Chunked Encoding to |
| webserver/httpd (attached patch). |
| |
| The attached patch is simple. It adds a configuration option to enable |
| chunked encoding. When enabled, the implementation will auto-detect the |
| cases where content length is not available ahead of time, and will |
| automatically engage chunked encoding transfers. |
| |
| Without this patch, the browser/client hangs forever, as it is |
| expecting more data. With this patch, the browser displays the |
| content. From Vlado Vidovic (2018-11-23). |
| * From patch attached to nuttx/ Bitbucket Issue #136 from Vlado Vidovic: |
| |
| The patch provided in issue 135, which adds support for HTTP Chunked |
| Encoding, covers all paths in the webserver app except CGI callbacks. |
| As a result, if a page being served happens to use CGI, it could |
| generate stream content that does not comply with HTTP Chunked Encoding. |
| |
| The patch attached amends the webserver app's CGI callbacks to use the |
| HTTP Chunked Encoding sender function instead of using send() |
| directly. From Gregory Nutt (2018-11-23). |
| * apps/system/critmon: Add a daemon to monitor critical section usage. |
| From Gregory Nutt (2018-11-24). |
| * apps/wireless/bluetooth/btsak: 'bt bnep0 info' outputs a reversed addr. |
| It should print BDAddr: aa:bb:cc:dd:ee:ff instead of BDAddr: |
| ff:ee:dd:cc:bb:aa From Lwazi (2018-11-25). |
| * Various initialization functions in configs/: Change /dev/slcd to |
| /dev/slcd0 for consistency From Alan Carvalho de Assis (2018-11-25). |
| * wireless/bluetooth/btsak: Fix some errors in btsak From Lwazi Dube |
| (2018-11-27). |
| * system: Fixes build error; There is no result variable, use errcode |
| instead. From Anthony Merlino (2018-11-28). |
| * apps/system/critmon/Makefile: Stack size and priority reversed. From |
| Daniel Pereira Carvalho (2018-11-29). |
| * apps/nshlib: Add support to use SLCD as NSH Console From Alan Carvalho |
| de Assis (2018-11-29). |
| * wireless/bluetooth/btsak/btsak_main.c: Fix address parsing From Lwazi |
| Dube (2018-11-30). |
| * apps/wireless/bluetooth/btsak: Add connect and disconnect commands to |
| btsak From Lwazi Dube (2018-12-02). |
| * apps/nshlib/nsh_romfsetc.c: Add support for CROMFS start-up script. |
| From David Sidrane (2018-12-06). |
| * apps/wireless/bluetooth/btsak: Remove unnecessary gatt get commands. |
| From Lwazi Dube (2018-12-08). |
| * apps/testing: Move apps/examples/ostest to apps/testing/ostest. From |
| Gregory Nutt (2018-12-12). |
| * apps/wireless/bluetooth/btsak/btsak_scan.c: Fix reversed address From |
| Lwazi Dube (2018-12-17). |
| * apps/system/nsh/nsh_main.c: Set NSH priorirty if the NSH task was |
| scheduled at a different priority than the configured priority. From |
| Gregory Nutt (2018-12-20). |
| * apps/system/configdata: Adds an "cfgdata" command which allows |
| manipulation of the /dev/config items via the command line. One such |
| use for this utility would be to set a "macaddr" configdata item, etc. |
| The utility is sort-of like a u-boot env variable edit function: |
| |
| For instance, to set a "macaddr" when the new CONFIG_MTD_CONFIG_NAMED |
| option is selected, you would do: |
| |
| nsh> cfgdata set macaddr [0xfc 0x01 0x0b 0x45 0xa1 0x12] |
| (The brackets denotes an array of bytes) |
| nsh> cfgdata set hostname myboard |
| |
| or using the old ID,INSTANCE numeric method: |
| |
| nsh> cfgdata set 0,0 [0xfc 0x01 0x0b 0x45 0xa1 0x12] |
| (The brackets denotes an array of bytes) |
| nsh> cfgdata set 1,0 myboard |
| |
| You can also display all config items: |
| |
| nsh> cfgdata print all |
| Name Len Data |
| macaddr 6 0xFC 0x01 0x0B 0x45 0xA1 0x12 |
| hostname 8 myboard |
| |
| From Ken Pettit (2018-12-20). |
| * apps/examples/smp: Add dependency on SMP in Kconfig From Masayuki |
| Ishikawa (2018-12-25). |
| * apps/testing/ostest: Add test for pthread-specific data. From Gregory |
| Nutt (2018-12-28). |
| * apps/examples/battery: Add Battery Charger Monitor Example From Alan |
| Carvalho de Assis (2019-01-04). |
| * apps/system/termcurses: Addition of termcurses libraries in |
| apps/system/termcurses From Ken Pettit (2019-01-05). |
| * apps/graphics/pdcurs34: Integration of termcurses into pdcurses, plus |
| pdcurses updates for multi-thread support From Ken Pettit (2019-01-05). |
| * [WIP] nshlib add var expansion in nsh parse From Daniel Agar |
| (2019-01-06). |
| * apps/system/nxplayer: Introduce CONFIG_NXPLAYER_MAINTHREAD_STACKSIZE |
| From Masayuki Ishikawa (2019-01-07). |
| * apps/graphics/pdcurs34/nuttx and system/termcurses: This commit fixes |
| two issues: |
| 1. A memory corruption issue that occurs from a paste operation that |
| would overflow the fixed buffer size for keyboard processing. |
| 2. A stall in getch() processing when there are cached keycodes in the |
| termcurses emulation (tcurses_vt100.c) |
| From Ken Pettit (2019-01-08). |
| * graphics/pdcurs34: This commit adds a configuration option to pdcurses |
| to enable line-drawing character (ALTCHARSET) when using the short |
| 16-bit chtype. This is done by limiting the characters to 7-bit ASCII |
| values and using the 8-th bit as the A_ALTCHARSET bit. This allows a |
| significant RAM savings 4K - 20K depending on terminal size) while |
| still allowing the nicer line-graphic characters for border drawing. |
| From Ken Pettit (2019-01-08). |
| * apps/nshlib/nsh_command.c: display built-in apps using multi-column |
| mode like the nsh commands From Ken Pettit (2019-01-11). |
| * apps/system/termcurses/tcurses_vt100.c: Fix an issue where the first |
| curses 'getch()' call sometimes (usually) hangs waiting for a keypress. |
| This bug was introduced when I fixed the keyboard 'paste' overflow |
| error. From Ken Pettit (2019-01-11). |
| * apps/nshlib/nsh_command.c: In all multi-column help output, calculate |
| an optimal column width rather than using a hard-coded width that may |
| or may not be appropriate. Also make the number of rows presented |
| dependent upon the maximum width of the widest column. From Gregory |
| Nutt (2019-01-11). |
| * apps/nshlib/nsh_parse.c: Fixes an error in the NSH parser. There was |
| a bug when executing an nsh shell script which contains a redirection. |
| When the command in the script is executed, it sets the |
| vtbl->np.np_redirect flag (as it should), but then doesn't restore it, |
| leaving it set at the end of the script execution. Then the |
| vtbl->np.np_redirect flag is set when the 'sh' command completes, |
| causing a restore from un-initialized variables, thus leading to a |
| crash. See the code snippet below for an example test case. |
| |
| Test case: |
| |
| NuttShell (NSH) |
| nsh> mkrd -s 1024 40 |
| nsh> mkfatfs /dev/ram0 |
| nsh> mount -t vfat /dev/ram0 /tmp |
| nsh> echo "echo 1 > /dev/null" > /tmp/test.sh |
| nsh> cat /tmp/test.sh |
| echo 1 > /dev/null |
| nsh> sh /tmp/test.sh |
| ... |
| |
| The nsh prompt doesn't get printed. You can type a couple of commands, |
| but then the system will crash because of bad pointers. From Ken |
| Pettit (2019-01-12). |
| * wireless/ieee802154/i8sak: Fixes issues related to re-running daemon. |
| Releases lock when releasing daemon. Re-sets daemon_shutdown so that a |
| subsequent daemon launch does not immediately return. From Anthony |
| Merlino (2019-01-13). |
| * NSH addroute: Adds command for setting default gateway. addroute |
| default <ipaddr> <interface> From Anthony Merlino (2019-01-13). |
| * apps/system/termcurses: Perform a bounds check to fix a random |
| Termcurses crash that I haven't been able to track down. The result of |
| of the subtraction for priv->keycount should never be negative, but I |
| think sometimes it is, so better to catch it and avoid a crash until I |
| can track it down. From Ken Pettit ? (2019-01-16). |
| * apps/system/vi: |
| |
| Bug fixes and changes to existing functionality |
| |
| 1. Deletion of last line in file using 'dd' caused infinite loop |
| searching for 'nextline'. Fixed. |
| 2. Insertion of line above 1st line using 'O' caused line to be |
| inserted on 2nd line. Fixed. |
| 3. Paste buffer from 'dd' was being free'd after the 'p'aste operation, |
| preventing multiple paste opportunity. Fixed. |
| 4. The cursor was not being bound to the line end and was allowed to |
| 'hover' over the '\n' EOL character. This caused wierd (relative to |
| standard vi) insertion locations and cursor movement with 'a'ppend |
| and 'i'nsert. Fixed. |
| 5. The 'vi_shrinkpos' position didn't take the end of file pointer into |
| account when calculating 'curpos', 'prevpos' variables causing |
| wierdness when deleting things near the end of the file. Fixed. |
| 6. The 'yy'ank command was improperly deleting the text from the |
| document instead of simply yanking to the paste buffer. Fixed. |
| 7. The 'dd'elete line funciton was not copying the deleted line to the |
| paste buffer as part of the delete operation. Fixed. |
| 8. The bottom line of the screen was sometimes being used for document |
| text and other times for command / find entry. Fixed by reserving |
| the bottom the bottom line for status / command only. |
| 9. When scrolling up / down through a file, the cursor position was not |
| preserved and moved further and further to the left column based on |
| the line lengths of the lines visited. Fixed. |
| 10. The display was being COMPLETELY redrawn with each keystroke, |
| causing the responsiveness to be unbearable. Fixed. Added logic |
| to dynamicall indicated which portions of the screen need to be |
| updated (full display, current line to end of screen, current line |
| only, none). |
| 11. The individual display line updates were being performed a |
| character at a time by calling the vi_putch() function, causing slow |
| performance, especially in telnet or USBCDC sessions where there is |
| a lot of overhead per packet. Fixed by calling vi_write() instead |
| with a block of characters with breaks as needed for TAB exansion. |
| 12. The forward delete 'x' operation allowed deletion through '\n' |
| characters causing lines to be joined. This is different from |
| standard vi where 'x' at the end of a line performs a delete |
| backward operation. Fixed. |
| 13. When in 'ex' or find sub-modes (':' or '/' bottom line modes), |
| hitting backspace with empty text did not return the operation to |
| command mode like it does in standard vi. Fixed. |
| 14. Performing a 'find' opertation would only search from the current |
| cursor position to the end of the file and did not wrap like in |
| standard vi. Fixed. |
| 15. Loading a file that was larger than the initial text allocation |
| would force a call to 'vi_extendtext', marking the file as modified |
| when in fact it hadn't even been loaded yet. Fixed. |
| 16. Combined vi_insert_mode and vi_replace_mode into a single function |
| to save code space since they are nearly identical routines. |
| 17. In command mode, backspace was deleting characters which is different |
| from standard vi. Backspace in command mode normally simply moves |
| the cursor left / to the previous line. Fixed. |
| 18. Added code to handle boundry conditions when the file is new and |
| commands are applied to an empty file. |
| 19. Fixed vi_shrinktext so it doesn't allocate a zero-length buffer when |
| the last character in the file is deleted. |
| 20. The 'x' command was not copying to the paste buffer. Fixed. |
| 21. Fixed parsecolon routine to properly deal with ":wq" command |
| sequence. |
| |
| New feature additions |
| |
| 1. Vi startup feature to prepend the current working directory to the |
| supplied filename if it does not start with '/' absolute path |
| specifier. This allows editing files in the current directory |
| without needing to fully qualify the filename. |
| 2. Standard '~' empty screen line characters for proper identification |
| of empty '\n' only lines at the end of the file. |
| 3. Moving into insert or append mode now prints '--INSERT--' in the |
| status line and clears it upon exit. |
| 4. Integration with termcurses to detect special keystrokes and to |
| handle terminal type differences. Haven't yet converted all vt100 |
| print codes to termcurses equivalents. |
| 5. Support for up, down, left, right arrows, page-up, page-down keys |
| in command mode. |
| 6. Added 'b' command to move cursor 'b'ack to previous word. Honors |
| the command repeat value for multiple word moves. |
| 7. Added 'w' command to move cursor to next 'w'ord. Honors the command |
| repeat value for multiple word moves. |
| 8. Added 'f' and 't' commands to find characters on the current line. |
| Honors the command repeat value. |
| 9. Added the find 'n'ext command to repeat the previous find operation. |
| 10. Added the 'H', 'M', and 'L' commands to move the cursor to top, |
| middle and bottom of the display. |
| 11. Extended yank/paste to manage a paste buffer with character mode in |
| addition to line mode. Character mode allows cut / paste of |
| individual characters or groups of characters vs. full lines. |
| 12. Added support in the 'd'elete and 'y'ank commands for character mode |
| deletions such as 'dw', 'dfa', '2yw', etc. |
| 13. Added support in paste routine for multiple paste using command value |
| argument. |
| 14. Added support for the 'D' and 'C' delete and change to end of line |
| commands. |
| 15. Added support for 's'ubstitute key ('x' followed by insert mode). |
| 16. Modified yank / paste allocation scheme to avoid repeated alloc |
| and free of paste buffer. Uses a minimum allocation size scheme and |
| only does free / realloc when paste does not fit. If the paste is |
| smaller than the current allocation and the current allocation is |
| larger than the threshold, then the buffer is freed and a smaller |
| buffer allocated. Otherwise the existing buffer is used. |
| 17. Support for 'P'aste before current cursor position. |
| 18. Support for '?' reverse search mode. |
| 19. Support for 'J'oin next line with current line command. |
| 20. Printing of current row,col in status line of display. |
| 21. Command repeat '.' support for commands that modifiy text. |
| 22. Support in replace / insert mode for arrow keys, PGUP / PGDN, HOME, |
| and END. Using these will cause the command repeat buffer to |
| reset such that only the last text addition after a cursor movement |
| is saved. |
| 23. Added 'X' delete previous command. |
| 24. Added "gg" go to top of document command sequence. |
| 25. Added "ZZ" save and quit command (equivalent to :wq). |
| 26. Implemented '^' goto first non-whitespace on current line, along |
| with '+' and '-' goto first non-whitespace on next / previous line. |
| 27. Added CR / LF goto first non-whitespace on next line in command |
| mode. From Ken Pettit (2019-01-16). |
| * apps/nshlib: Fix buffer overrun when redirected to a file. SAVE_SIZE must |
| be the same as sizeof(struct serialsave_s). From Masayuki Ishikawa |
| (2019-01-19). |
| |
| 7.29 2019-03-25 Gregory Nutt <gnutt@nuttx.org> |
| |
| * apps/system/vi/vi.c: Fix an infinite loop bug that can show up in some |
| cases (plus a couple of other items). From Ken Pettit (2019-01-22). |
| * apps/system/cfgdata: Make builtin task stack size and priority |
| configurable. Set default to 2048 (from 1024) per recommendation of |
| Ken Pettit. From Gregory Nutt (2019-01-22). |
| * apps/testing/smp: Move apps/examples/smp to apps/testing/smp From |
| Gregory Nutt (2019-01-23). |
| * nshlib/nsh_console.h: Fix copy paste errors. Some Kconfig |
| configuration names needed CONFIG_ prefix. From David Sidrane |
| (2019-01-24). |
| * testing/: Move all file system tests from examples/ to testing/ |
| (fstest, nxffs, smart, smart_test). From Gregory Nutt (2019-01-24). |
| * testing/cxxtest: Move examples/cxxtest to testing. From Gregory Nutt |
| (2019-01-24). |
| * apps/system/zmodem: Switch to the raw mode before transfer and restore |
| to the original setting after finishing the transfer. From Xiang Xiao |
| (2019-01-27). |
| * apps/netutils/codecs/base64.c: Remove the big stack array From Xiang |
| Xiao (2019-01-27). |
| * netutils/codecs/base64.c: Add base64_[de|en]code_length() API From |
| ligd (2019-01-27). |
| * system/nxplayer/nxplayer.c: Fix build error when only enable |
| CONFIG_AUDIO_EXCLUDE_VOLUME is enabled. From ZhongAn (2019-01-27). |
| * apps/system/system/system.c: Correct a path name. From anchao |
| (2019-01-27). |
| * apps/testing/cxxtest: Add a README file. From Gregory Nutt |
| (2019-01-27). |
| * apps/tools/mksymtab.sh: 'export LC_ALL=C' to get the traditional sort |
| order From anchao (2019-01-27). |
| * Follow up the kernel signal-related change in: |
| - examples/oneshot/oneshot_main.c: |
| - examples/alarm/alarm_main.c: |
| - examples/ajoystick/ajoy_main.c |
| - examples/djoystick/djoy_main.c |
| - examples/buttons/buttons_main.c |
| - examples/zerocross/zerocross_main.c |
| - graphics/traveler/src/trv_input.c |
| - graphics/ft80x/ |
| From Xiang Xiao (2019-01-27). |
| * apps/nshlib/nsh_netinit.c: Update for changes to signal notification |
| structures. From Gregory Nutt (2019-01-27). |
| * graphics/NxWidgets/nxwm/src/ccalibration.cxx: Correct and error in the |
| type of the return value. From Gregory Nutt (2019-01-27). |
| * apps/modbus/Kconfig: Fix modbus master Kconfig. Modbus Master ASCII |
| compiles correctly From Alan Carvalho de Assis (2019-01-28). |
| * apps/netutils/dhcpc/dhcpc.c: Fix an error for DHCP REQUEST receiving a |
| NAK.In DHCP Request operation, no need to update ciaddr to the client |
| address and keep it as 0. From Kevin Liu (2019-01-30). |
| * apps/eamples/modbusmaster: Add Simple Modbus master example. This |
| example only supports Read/Write HoldingRegisters, but it is easy to |
| extend it to support Read/Write Input/Coils/etc. Originally creatd bey |
| Vytautas in 2016 and updated with minor fixes for this commit. From |
| Alan Carvalho de Assis (2019-02-02). |
| * Update for corrected name of standard header file. Should be dlfcn.h, |
| not dllfcn.h. I am surprised no one ever noticed before now. From |
| Gregory Nutt (2019-02-09). |
| * The file system can no longer be disabled. Remove all conditional |
| logic based on CONFIG_NFILE_DESCRIPTORS==0 From Gregory Nutt |
| (2019-02-11). |
| * apps/: Remove/replace all conditional logic based on |
| CONFIG_NSOCKET_DESCRIPTORS == 0. That value is always greater than |
| zero now. In places just replace with #ifdef CONFIG_NET. From Gregory |
| Nutt (2019-02-11). |
| * apps/testing/scanftest: Port of Greg King's scanf test |
| (https://github.com/cc65). From Johannes (2019-02-14). |
| * apps/testing/scanftest/scanftest_main.c: Test improvements. From |
| Gregory Nutt (2019-02-14). |
| * testing/scanftest/scanftest_main.c: Initialized s3, changed Ok to |
| PASSED for Back to Back test. From Johannes (2019-02-15). |
| * configs/system/embedlog: Update to version 0.4.0. From Michal Lyszczek |
| (2019-02-15). |
| * app/examples/embedlog: This example program presents most usefull |
| features of embedlog library and how to use them. From Michal Lyszczek |
| (2019-02-15). |
| * system/nxplayer and nxrecorder: Change 'int prio' to 'unsigned int prio'. |
| Required by changes to MQ function prototypes. From Michal Lyszczek |
| (2019-02-15). |
| * system/nxplayer and nxrecorder: Fix some coding standard violatins |
| that are just to in-yer-face to ignore: No CamelCase variable names. |
| This was not an extensive check for use of CamelCase. Just some I |
| stumbled across. From Gregory Nutt (2019-02-15). |
| * tools/check-hash.sh: Add a tool check hash on downloaded packages. |
| From Michal Lyszczek (2019-02-18). |
| * apps/fsutils/inih: New package. inih (INI Not Invented Here) is a |
| simple .INI file parser written in C. https://github.com/benhoyt/inih |
| From Michal Lyszczek (2019-02-18). |
| * apps/examples/ini_dumper: New example program. ini_dumper is example |
| program that dumps content of ini file in pretty ascii table. It is |
| using inih ini library in fsutils/inih. From Michal Lyszczek |
| (2019-02-18). |
| * Some updates due to NuttX renaming: CONFIG_BOARD_INITIALIZE is not |
| CONFIG_BOARD_LATE_INITIALIZE; board_initialize() is now |
| board_late_initialize(). From Gregory Nutt (2019-02-18). |
| * apps/system/psmq: New package. psmq is publish subscribe message |
| queue. It's a set of programs and libraries to implement |
| publish/subscribe way of inter-process communication on top of POSIX |
| message queue. From Michal Lyszczek (2019-02-18). |
| * apps/system/psmq/README.txt: Add a README.txt file. This is just a |
| copy of the description accompanying that patch that added |
| system/psmq. From Gregory Nutt (2019-02-18). |
| * pps/system/psmq/Kconfig: Fix recursive dependency. SYSTEM_PSMQ both |
| depended on and selected SYSTEM_EMBEDLOG From Michal Lyszczek |
| (2019-02-19). |
| * system/vi: Condition KEY_CMDMODE_REPEAT with |
| CONFIG_SYSTEM_VI_INCLUDE_COMMAND_REPEAT to avoid build error when |
| option is not selected. From Anthony Merlino (2019-02-23). |
| * apps//netutils/webclient/Kconfig: NET_SOCKOPTS is needed to get |
| webclient compiled. From Alan Carvalho de Assis (2019-02-24). |
| * apps/testing/ostest: Add test of pthread_mutex_timedlock() From |
| Gregory Nutt (2019-02-24). |
| * examples: Add sx127x demo From Mateuz Szafoni (2019-02-25). |
| * apps/system/taskset: Fix command arguments are not passed From |
| Masayuki Ishikawa (2019-02-25). |
| * testing/ostest/timedmutex.c: pthread_mutex_timedlock() returns |
| EDTIMEDOUT on a timedout, not eagain. From Gregory Nutt (2019-02-25). |
| * testing/ostest/setvbuf.c: Fix several errors in the setvbuf() test. |
| From Gregory Nutt (2019-02-25). |
| * apps/system/cu/Kconfig: CU term depends on TERMIOS and should select |
| it. From Alan Carvalho de Assis (2019-03-05). |
| * apps/examples/nxterm and graphics/NxWidgets/nxwm: Replace direct calls |
| to nxtk_register with legal, indirect calls via |
| boardctrl(BOARDIOC_NXTERM). Replace calls to (deleted) |
| nxterm_unregister(). The correc way to delete a driver is by |
| unlink'ing it. From Gregory Nutt (2019-03-06). |
| * apps/examples/nxterm: Most configuration options were not available in |
| the Kconfig file. From Gregory Nutt (2019-03-06). |
| * apps/examples/nxterm, graphics/NxWidgets: Replace illegal direct calls |
| to nxterm_redraw() and nxterm_kbdin() with new boardctl() calls. From |
| Gregory Nutt (2019-03-06). |
| * apps/examples/modbusmaster/mbmaster_main.c: eMBMasterRegHoldingCB |
| cannot be static. From Alan Carvalho de Assis (2019-03-07). |
| * apps/examples/sx127x_demo/Kconfig: Fix misplaced 'if' From Gregory |
| Nutt (2019-03-07). |
| * apps/examples/nxterm: NxWM passed the size of the NxTK sub-window but |
| nxterm example passed the size of the complete NxTK window. They must |
| be made consistent. From Gregory Nutt (2019-03-09). |
| * Missing semicolon at the end of function call. From Kejun ZHOU |
| (2019-03-11). |
| * graphics: nx_openwindow() and nxtk_openwindow() now accepts an |
| addtional 'flag' parameter. This argument is not used at present but |
| will, eventually enable a RAM backed, per-window framebuffer. From |
| Gregory Nutt (2019-03-13). |
| * This commit adds a test example at apps/examples/pwfb that will be used |
| for testing the per-window framebuffer feature. The test does not work |
| correctly yet. From Gregory Nutt (2019-03-16). |
| * apps/examples/pwfb: Change b32_t's to b16_t's; don't need so much |
| precision. Some improvements to motion. Add VERBOSE debug output. |
| Still lots of bugs. From Gregory Nutt (2019-03-16). |
| * apps/examples/pwfb/pwfb_main.c: Temporarily work around a race |
| condition by adding a delay. From Gregory Nutt (2019-03-16). |
| * - apps/examples/pwfb: Solve a race condition by changing some relative |
| priorities. Also removes a delay kludge that used as a workaround. |
| - apps/examples/pwfb: Add rate control. Examples becomes unstable at |
| high update rates. |
| From Gregory Nutt (2019-03-17). |
| * nshlib/nsh_timcmds.c: Uninitialized struct tm caused 'date -s' to |
| fail. From Valmantas Palikša (2019-03-18). |
| * apps/examples/pwfb: Add a toolbar to the example windows. From |
| Gregory Nutt (2019-03-18). |
| * This commit adds apps/examples/pwlines, another test of the pw-window |
| framebuffer lgoic. From Gregory Nutt (2019-03-20). |
| |
| 7.30 2019-05-19 Gregory Nutt <gnutt@nuttx.org> |
| |
| * Add some awareness of overlays to apps/examples/fb From Matthew Koch |
| (2019-03-25). |
| * examples/, graphics/NxWidgets: Update NX window clients so that they |
| use the new 'event' callback (vs. the obsoleted 'blocked' callback). |
| From Gregory Nutt (2019-03-25). |
| * graphics/NxWidgets/nxwidgets/src/ccallback.cxx and |
| include/graphics/nxwidgets/: Add a synchronize method to every window. |
| This is a wrapper arounc nx[tk]_sync and permits C++ applications to |
| synchronize with the NX server. From Gregory Nutt (2019-03-27). |
| * Various graphics apps: If CONFIG_VNCSERVER=y, don't call |
| vnc_default_fbinitialize() directly. That is a violation of the portable |
| POSIX interface. Instead, call boardctl(BOARDIOC_VNC_START);. From |
| Gregory Nutt (2019-04-02). |
| * apps/system/nxplayer: Fix some logical errors from recent commits. They |
| broke the build of the nxplayer as a library vs. a task. |
| apps/graphics/nxglyphs: Fix yet more namespace problems. From Gregory |
| Nutt (2019-04-04). |
| * Separate nxwidgets and nxwm into separate directories. Remove old, |
| common NxWidgets directory. From Gregory Nutt (2019-04-04). |
| * apps/graphics/nxglyphs: Put all NxWidgets and NxWM glyphs into a common |
| directory where they can eventually be shared. Decouple (mostly) from |
| nxwidgets and nxwm so that they can be used elsewhere. Creates |
| include/graphics/nxglyphs.h From Gregory Nutt (2019-04-04). |
| * graphics/nxwm/src/nxwm_main.cxx: Move from |
| graphics/nxwidgets/UnitTests/nxwm/nxwm_main.cxx. It is no longer a unit |
| test, but the main startup entry point for NxWM. From Gregory Nutt |
| (2019-04-04). |
| * graphics/nxwidgets and inclu/graphics/nxwidgets: Add support for modal |
| windows. From Gregory Nutt (2019-04-05). |
| * apps/graphics/nxglyphs: Add some new cursor bitmap images. From Gregory |
| Nutt (2019-04-07). |
| * apps/nxglyphs/include: Add mkcursor.c. Will auto-generate cursor image |
| header file from Gimp C output. From Gregory Nutt (2019-04-07). |
| * apps/graphics/littlevgl. Update to Littlevgl 5.3. |
| apps/examples/lvgldemo. Update to Littlevgl 5.3 From Matthew Koch |
| (2019-04-08). |
| * apps/examples/pwfb: Extend example to verify software cursors. From |
| Gregory Nutt (2019-04-10). |
| * app/examples/pwfb: Add options to reduce the number of windows. This is |
| helpful during debug to reduce the complexity. From Gregory Nutt |
| (2019-04-10). |
| * graphics/nxglyphs: Update cursor images. Better to have clean, if |
| ragged cursor edges that weird color effects from anti-aliasing |
| attempts. From Gregory Nutt (2019-04-13). |
| * include/graphics/nxwidgets/cnxserver.hxx: Add Cursor methods to the |
| CNxServer class. From Gregory Nutt (2019-04-13). |
| * /apps/graphics/nxglyphs: Add 16x16 cursor images. 30x30 are kind of |
| large. From Gregory Nutt (2019-04-14). |
| * apps/system/nxplayer: Fix compile problems when audio debug is enabled. |
| From Gregory Nutt (2019-04-23). |
| * Twm4Nx is a port of twm, Tab Window Manager (or Tom's Window Manager) |
| version 1.0.10 to NuttX NX windows server. No, a port is not the right |
| word. It is a re-design of TWM from the inside out to work with the NuttX |
| NX server. The name Twm4Nx reflects this legacy. But Twm4Nx is more a |
| homage to TWM than a port of TWM. |
| |
| The original TWM was based on X11 which provides a rich set of features. |
| TWM provided titlebars, shaped windows, several forms of icon management, |
| user-defined macro functions, click-to-type and pointer-driven keyboard |
| focus, graphic contexts, and user-specified key and pointer button |
| bindings, etc. |
| |
| Twm4Nx, on the other hand is based on the NuttX NX server which provides |
| comparatively minimal support. Additional drawing support comes from |
| the NuttX NxWidgets library (which necessitated the change to C++). |
| |
| Twm4Nx is greatly stripped down and targeted on small embedded systems |
| with minimal resources. For example, no assumption is made about the |
| availability of a file system; no .twmrc file is used. Bitmaps are not |
| used (other than for fonts). |
| |
| The TWM license is, I believe compatible with the BSD license used by |
| NuttX. The origin TWM license required notice of copyrights within each |
| file and a full copy of the original license which you can find in the |
| COPYING file within this directory. |
| |
| STATUS: |
| |
| This port was brutal. Much TWM logic was removed because it depending on |
| X11 features (or just because I could not understand how to use it). The |
| logic is partial. A lot more needs to be done to have a complete system |
| (hence, it is marked EXPERIMENTAL). The kinds of things that need to |
| done are: |
| |
| 1. Update some logic that is only fragmentary for how like resizing, and |
| menus. |
| 2. Integrate NxWidgets into the windows: The resize menu needs a CLabel, |
| the menus are CListBox'es, but not completely integrated, the Icon |
| Manager needs to be a button array. |
| 3. Revist Icons. They are windows now, but need to be compound widgets |
| lying on the background. |
| 4. Widget events are only partially integrated. A lot more needs to be |
| done. A partial change to thoe event system that hints at the |
| redesign is in place but it is far from complete. From Gregory Nutt |
| (2019-04-25). |
| * graphics/twm4nx/src/cwindow.cxx: Finishes first cut at window event |
| management. Use CNXWidgets::CButtonArry for Icon manager. Implement |
| button event handling. From Gregory Nutt (2019-04-26). |
| * graphics/nxwidgets/src/cbuttonarray.cxx: Add a method to CButtonArray |
| that will allow us to dynamically resize the array (at the cost of losing |
| all button labels). From Gregory Nutt (2019-04-26). |
| * netutils/netlib/netlib_parseurl.c: Add a more flexible version of |
| netlib_parsehttpurl. This one can parse any URL, and is extensible so |
| future improvements keep the same API. From Sebastien Lorquet |
| (2019-04-26). |
| * apps/graphics/twm4nx: In order for widgets to draw the correct window or |
| toolbar, it is necessary to get the CWidgetControl instance from the |
| window we want to use, not to create a new instance. From Gregory Nutt |
| (2019-04-26). |
| * apps/graphics/twm4nx: Finsh menu-related event handling. Extended menu |
| handling. Allow external application event handling using a new base |
| class (CTwm4NxEvent). From Gregory Nutt (2019-04-27). |
| * apps/graphics/twm4nx: Flesh out some of the Resize logic. Still missing |
| the pull events needed to do the resize. From Gregory Nutt (2019-04-27). |
| * apps/graphics/twm4nx: Add compound widget CIconWidget. This will |
| eventually replace the icon Windows with widgets that can be drawn on the |
| Background. From Gregory Nutt (2019-04-27). |
| * apps/examples/pca9635/pca9635_main.c: fix compilation From Mateusz |
| Szafoni (2019-04-28). |
| * apps/netutils: Support for the current version of cJSON From Mateusz |
| Szafoni (2019-04-28). |
| * apps/graphics/twm4nx: Remove Icon Windows; replace with IconWidgets that |
| are draw on the background. Add CIconWidget event generation. Add event |
| handling logic to CIconWidget. From Gregory Nutt (2019-04-28). |
| * apps/graphics/twm4nx: Suppress input thread if using the VNC server. We |
| don't need to catch input from keyboard or mouse devices in that case; |
| those inputs will be injected into NX directly by the VNC server. |
| Includes a couple of fixes from initial bring-up attempts. From Gregory |
| Nutt (2019-04-28). |
| * apps/netutils/netinit. This commit removes the private network |
| initialization logic from NSH and puts in a common location at |
| apps/netutils/netinit. Now that netork initialization logic can be used |
| by applications that do not include NSH. From Gregory Nutt (2019-04-29). |
| * apps/graphics/twm4nx: Add options to initialize the system via |
| boardctl() and to bring up the network using the new |
| apps/netutils/netinit. This latter is only necessary because VNC is |
| being used to provide graphics. From Gregory Nutt (2019-04-29). |
| * Many locations: Remove references to CONFIG_DISABLE_SIGNALS. Signals |
| can no longer be disabled. From Gregory Nutt (2019-04-29). |
| * apps/graphics/NxWidgets: Fix a possible deadlock condition when waiting |
| for window geometry data that will never come. Fixed by re-requesting |
| geometry data if we don't already have it. From Gregory Nutt (2019-05-01). |
| * apps/graphics/twm4nx: Revamp how background events are handled. From |
| Gregory Nutt (2019-05-01). |
| * include/graphics/nxwidgets/cwidgetcontrol.hxx: Add handshake to |
| getWindowHandle() to avoid returning a NULL handle. But now Twm4Nx hangs |
| waiting for the non-NULL handle, From Gregory Nutt (2019-05-01). |
| * apps/graphics/twm4nx: Fix various bugs found in bringup: Re-order |
| object instantiation to account for inter-object dependencies. Correct |
| mq_receive() buffer size. Fix a backward comparison. |
| |
| apps/graphics/twm4nx: Twm4Nx debug can now be separately enabled so that |
| it does not get overwhelmed by other graphics debug output. From Gregory |
| Nutt (2019-05-02). |
| * apps/graphic/twm4nx: Fix junk variable that was shadowing variable of |
| the same name in the base CNxWidget class. Resolves all start up crash |
| issues. Now I need to figure out why the host VNC client drops the |
| connection. From Gregory Nutt (2019-05-02). |
| * apps/netutils/libcurl4nx: This is an initial commit libcurl4nx. It is |
| not complete yet, but I still wish to commit the unfinished bits to |
| describe the roadmap, and because it is already usable. It will be |
| updated and fixed in the future weeks and months, certainly including |
| POST support and later, SSL. |
| |
| Some improvements could be made by anyone. For example, I know the main |
| routine in perform() shall be split into several parts for readability. I |
| apologize in advance for this kind of spaghetti code, but I was short on |
| time to refactor it. Also chunked HTTP transfer encoding would be a nice |
| contribution from anyone interested. It is detected but not yet |
| supported. From Sebastien Lorquet (2019-05-03). |
| * graphics/twm4nx/src/cbackground.cxx: Should set the initial background |
| color immediately without waiting for a redraw. From Gregory Nutt |
| (2019-05-04). |
| * graphics/twm4nx/Kconfig: Add configuration to disable keyboard/mouse |
| input for testing purposes. |
| |
| graphics/twm4nx/src/ciconmgr.cxx: Correct initial window size and |
| position in the upper right hand corner; Need to fill draw the button |
| array immediately on window creation. |
| |
| graphics/twm4nx/src/cwindow.cxx: Need to fill the toolbar initially |
| with the widget background color. |
| From Gregory Nutt (2019-05-04). |
| * apps/graphics/NxWidgets: CNxTkWindow, CNxWindow, CNxServer: Add support |
| to create RAM backed windows. From Gregory Nutt (2019-05-04). |
| * apps/graphics/twm4nx: IconMgr window now comes up correctly. Need to |
| revisit window width setup. All windows are now created as RAM backed |
| windows. From Gregory Nutt (2019-05-04). |
| * apps/graphics/twm4nx: Add option to use touchscreen instead of mouse |
| input. Add option to use the touchscreen with no keyboard. From Gregory |
| Nutt (2019-05-04). |
| * graphics/twm4nx/src/cbackground.cxx: Add logic to handle polling for |
| background icon events. |
| |
| graphics/twm4nx/src/window.cxx: Add flags to CWindow initializer to |
| support customization of toolbar buttons and other window properties. |
| Add framework to handle toolbar button presses. Window minimization |
| (aka, iconification) does not work. |
| |
| graphics/twm4nx/src/input.cxx: Add support to scaling touchscreen. Not |
| needed for the current testing because the touchscreen naturally matches |
| the display size. But will be needed, along with calibration screen, in |
| the future. From Gregory Nutt (2019-05-05). |
| * apps/graphics/twm4nx: Add logic to hide the window when it is iconified |
| and restore the window when it is de-iconfied. Iconification works, |
| de-iconification does not. From Gregory Nutt (2019-05-05). |
| * apps/graphics/twm4nx: Try to improve icon text spacing. Not noticeably |
| better, however. Split long icon title on two lines below the icon |
| image. Both iconification and de-iconification now work. From Gregory |
| Nutt (2019-05-06). |
| * apps/graphics/twm4nx: Add initial support for the main menu. The main |
| menu will come up when a left click is performed on the background. The |
| main menu is used for starting applications. The adds the CMainMenu |
| class that implements the main menu and an IApplication interface class |
| the provides th template for how any external C++ application can add |
| itself to the Main Menu. Still missing is the logic that responds to the |
| menu item selection and sends the event to the Main Menu as well as the |
| logic in the Main Menu that handles the event and either brings up a |
| sub-menu or starts and application. From Gregory Nutt (2019-05-06). |
| * apps/graphics/twm4nx: Replace most usage of NUL-terminated C strings |
| with NXWidgets::CNxString. From Gregory Nutt (2019-05-06). |
| * apps/graphics/twm4nx: Exploit the new feature to create hidden windows. |
| This cleans up some brief window startup anomalies. Also fixes an |
| initialization error in CMenus. From Gregory Nutt (2019-05-07). |
| * apps/graphics/twm4nx: First cut at redesigned dragging logic. Window |
| dragging now sort of works in an unreliable hurky-jerkky way. More to be |
| done. From Gregory Nutt (2019-05-07). |
| * apps/graphics/twm4nx: Extend the IEventTaps interfaces and user's |
| thereof to better handle the cases when dragging where the mouse position |
| gets ahead of the window updates and the reported mouse position lies not |
| in the toolbar window, but in the main window or even outside of the |
| window. From Gregory Nutt (2019-05-07). |
| * apps/graphics/twm4nx: Add initial files to support an NxTerm |
| application. On this initial commit, these are just the NxWM NxTerm |
| files with some renaming. These are not finished and have not yet been |
| hooked into the build system. From Gregory Nutt (2019-05-08). |
| * apps/graphics/nxwidgets: CWidgetControl::handleLeftClick now returns a |
| value to indicate if the click was actually processed or not. |
| CWidgetControl::pollMouseEvents: Correct return value. From Gregory |
| Nutt (2019-05-08). |
| * apps/graphics/twm4nx: CBackground::event(): Implement logic to handle a |
| left click on the background and to bring up the main Menu. |
| CWindowEvent: Extend message to distinguish between keyboard and mouse |
| input. Mouse position and buttons now accompany the mouse input data. |
| CMenus: Add methods to query and control the visibility of the menu. |
| With these changes, the main menu appears when any location on the |
| background not occupied by an icon is clicked. From Gregory Nutt |
| (2019-05-08). |
| * apps/graphics/twm4nx: CMenus now uses CWindows, rather that raw NX |
| windows. This rippled through to many other things due to conflicts |
| between NUL-terminated C strings and NXWidgets::CNxStrings. From Gregory |
| Nutt (2019-05-08). |
| * apps/graphics/twm4nx: CWindow: Add a global function that can be used to |
| determine the minimum width of a window. If the window is set to a width |
| smaller than this, then toolbar items will overlap and the toolbar will |
| be corrupted. This is a global function (rather than a method of |
| CWindow) because in some cases, this minimum width must be known before |
| the window is created. From Gregory Nutt (2019-05-08). |
| * apps/graphics/nxwidgets: Add methods to all windows to query if a window |
| is visible or hidden. From Gregory Nutt (2019-05-09). |
| * apps/graphics/twm4nx: Better integrate menus and iconification: Bring-up |
| up a menu is like de-iconifcation, except there is no icon to be erases; |
| taking down a menu is like iconification except that there is no icon to |
| present. |
| |
| apps/graphics/twm4nx: Use NxWidgets methods which work in all contexts |
| instead of trying to come up with a way to know if a window is displayed |
| through complex flags. |
| |
| apps/graphics/twm4nx: Add logic so that the main menu is placed at (or |
| near) the position where the background was clicked. |
| |
| apps/graphics/twm4nx: In resize operation, don't let window get narrower |
| than the minimum toolbar width. |
| |
| apps/graphics/twm4nx: The Icon Manager now adds a Main Menu entry that |
| will de-iconify the Icon Manager or raise to the top of the hierarchy if |
| not iconfified. This is useful when there are many open windows. |
| From Gregory Nutt (2019-05-09). |
| * apps/graphics/twm4nx: Use button array vs list box for menus. |
| |
| apps/graphics/twm4nx: Correct an error in how menu windows are created. |
| From Gregory Nutt (2019-05-10). |
| * apps/graphics/twm4nx: Add a 'Desktop' item to the main menu that will |
| iconify all windows and menus and just show the open desktop. |
| |
| apps/graphics/twm4nx: Add more controls for the events that will be |
| generated on basic window redraw, mouse/keyboard input, and keyboard input. |
| |
| apps/graphics/twm4nx: Add logic to support distribution of gnereric |
| application window events. |
| |
| apps/graphics/twm4nx: Window events are now communicated properly to the |
| application-specific event handler. Menus now seem to be receiving |
| events and working well. |
| From Gregory Nutt (2019-05-10). |
| * apps/system/spi: I needed a small test tool for spi in the style of the |
| I2C tool, but I didn't see one so I've hacked one out of the I2C tool |
| source. From Dave Marples (2019-05-10). |
| * apps/graphics/twm4nx: Add new logic to place an icon at a reasonable |
| spot on the background. From Gregory Nutt (2019-05-11). |
| * apps/graphics/twm4nx: Modify how applications register with the main |
| menu. Add logic to support all possible menu selection notification |
| methods: By putting up a sub-menu, by starting an application, or be |
| sending an event. From Gregory Nutt (2019-05-11). |
| * apps/graphics/twm4nx: Add an IApplicationFactory interface. From |
| Gregory Nutt (2019-05-11). |
| * apps/graphics/twm4nx: This commit incorporates the NxTerm window hosting |
| NSH. This is just code complete and just compiles with no errors. The |
| NxTerm item does not appear in the Main Menu, however, selecting the menu |
| item does not yet bring up the NxTerm window. |
| |
| apps/graphics/twm4nx: Clean up some logic associated with use of |
| multiple Icon Managers. From Gregory Nutt (2019-05-12). |
| * apps/graphics/twm4nx: Add missing event generation logic when a window is |
| closed. |
| |
| apps/graphics/twm4nx: Fix a couple of errors in the unused resize |
| logic: It was not hiding the resize menu tso it appeared as a artifact |
| in the upplr left hand corner. Was calling setSize() on the window |
| instead of getSize(). That was causing errors because the size being set |
| was uninitialized. From Gregory Nutt (2019-05-12). |
| * apps/graphics/NXWidgets/: NXWidgets::CNxWidgets: Fix some issues with |
| returned values. On setting the widget size or position, it was |
| returning false if there was no change in size or position. Many places |
| in the code were treating the false return value as an error. From |
| Gregory Nutt (2019-05-12). |
| * apps/graphics/twm4nx: Simpify application startup. |
| |
| apps/graphics/twm4nx: Various fixes to get the NxTerm window to come |
| up properly. It does now come up okay, but the system basically loses |
| its mind thereafter. Looks good until some buttons are pressed. |
| From Gregory Nutt (2019-05-12). |
| * apps/graphics/twm4nx: Fix several errors associated with the NxTerm |
| buttons. Most changes involved fixing crashes with the exit button is |
| pressed. Now the NxTerm windows behave well. However, they are not |
| receiving console input so there is still more to be done. |
| |
| apps/graphics/twm4nx: Fix error in placement of icons on the desktop |
| From Gregory Nutt (2019-05-13). |
| * apps/graphics/twm4nx: Icons can now be moved, but there are artifacts: |
| Need to erase the old icon region on the background before drawing the |
| new icon image during the move. From Gregory Nutt (2019-05-13). |
| * apps/graphics/twm4nx: When moving icons, erase the old icon image before |
| drawing the new one. |
| |
| apps/graphics/twm4nx: Add logic to detect collisions with reserved |
| regions in the background or with other icons when moving an icon on |
| the desktop. |
| From Gregory Nutt (2019-05-14). |
| * apps/graphics/twm4nx: Correct logic in Icon Manager for the case where |
| the number of windows causes the Icon Manager to increase in size by one |
| row. |
| |
| apps/graphics/twm4nx: Fix an error in event notification sent by the |
| Icon Manager when a window is selected. |
| |
| apps/graphics/twm4nx: In the Icon Manager, do not use the window name to |
| identify which button press corresponds to which Window. Window names |
| are not unique. Instead, it now keeps track of which row x column was |
| assigned to the window name. That row x column uniquely associates a |
| window with a button and does not depend on the window name in any way. |
| From Gregory Nutt (2019-05-14). |
| * apps/graphics/nxwidgets/src/cbuttonarray.cxx: Correct an error |
| CButtonArray. Was not correctly resizing the widget when the dimensions |
| of the button array changed. From Gregory Nutt (2019-05-15). |
| * apps/graphics/twm4nx: This is a complete redesign of the CResize class. |
| Only partially functional on initial commit. Initial testing is mixed. |
| The resize window appears, but nothing else good happens. No hardfaults |
| though. |
| |
| apps/graphics/twm4nx: Forgot to install the IEventTap instance. Now |
| resizing kind of works, but I can't get out of it! There is a basic |
| problem in the window needs to be updated for the new size and there is |
| no mechanism in place to do that (at least not with RAM backed windows). |
| |
| apps/graphics/twm4nx: Fix a bad width calculation. |
| From Gregory Nutt (2019-05-15). |
| * apps/graphics/twm4nx: Fix routing of redraw events. |
| |
| apps/graphics/twm4nx: Other toolbar buttons need to be disabled while |
| resizing. Lots of problems if you decide to iconify or exit while |
| resizing. CResize now disables all buttons except for the RESIZE button |
| while resizing. |
| |
| apps/graphics/twm4nx: Add an event and logic to support notification of |
| changes in the size of a window to NxTerm. |
| |
| apps/graphics/twm4nx: Correct the maximum size of a message. Recent |
| changes caused message send failures because a message exceed that |
| previous maximum size. From Gregory Nutt (2019-05-16). |
| * Various updates to adapt to change in boardctl() interface. From Gregory |
| Nutt (2019-05-16). |
| * apps/graphics/twm4nx: During resizing, when the tool bar is drawn, the |
| toolbar background must be redraw before the buttons and title are |
| redrawn. From Gregory Nutt (2019-05-16). |
| * apps/graphics/nxglyphs: Add a new resize cursor image. |
| apps/graphics/twm4nx: Use new resize cursor image. From Gregory Nutt |
| (2019-05-17). |
| * apps/graphics/twm4ndx: Compile out cursor support if we are using a |
| mouse From Gregory Nutt (2019-05-17). |
| |
| 8.1 2019-xx-xx Gregory Nutt <gnutt@nuttx.org> |