| # |
| # For a description of the syntax of this configuration file, |
| # see the file kconfig-language.txt in the NuttX tools repository. |
| # |
| |
| config EXAMPLES_NETTEST |
| tristate "Network test example" |
| default n |
| depends on NET_TCP |
| depends on NET_SOCKOPTS |
| ---help--- |
| Enable the network test example |
| |
| if EXAMPLES_NETTEST |
| |
| config EXAMPLES_NETTEST_SENDSIZE |
| int "Payload size" |
| default 4096 |
| ---help--- |
| The test client sends well-known packets to the server. The server |
| will receive and verfity those packets. This setting determines |
| size of each packet. |
| |
| config EXAMPLES_NETTEST_PROGNAME1 |
| string "Target1 program name" |
| default "nettest" if !EXAMPLES_NETTEST_TARGET2 |
| default "nettest1" if EXAMPLES_NETTEST_TARGET2 |
| ---help--- |
| This is the name of the program that will be used when the Nettest |
| program is installed. |
| |
| config EXAMPLES_NETTEST_STACKSIZE1 |
| int "Target1 stack size" |
| default DEFAULT_TASK_STACKSIZE |
| |
| config EXAMPLES_NETTEST_PRIORITY1 |
| int "Target1 priority" |
| default 100 |
| |
| config EXAMPLES_NETTEST_LOOPBACK |
| bool "Loopback test" |
| default n |
| depends on NET_LOOPBACK || IEEE802154_LOOPBACK || PKTRADIO_LOOPBACK |
| ---help--- |
| Perform the test using the local loopback device. In this case, |
| both the client and the server reside on the target. |
| |
| # No server if loopback; No second target if loopback |
| |
| if !EXAMPLES_NETTEST_LOOPBACK |
| |
| config EXAMPLES_NETTEST_SERVER |
| bool "Target1 is server" |
| default n |
| depends on !EXAMPLES_NETTEST_LOOPBACK |
| ---help--- |
| Select to use the host as the client side of the test. Default: The |
| target is the client side of the test |
| |
| config EXAMPLES_NETTEST_TARGET2 |
| bool "Second endpoint is a target" |
| default n |
| ---help--- |
| By default, the host PC is configured as the second endpoint of the |
| NETTEST. If this option is selected, then the second endpoint |
| will be built into the FLASH image as well. This means that you |
| can use two target boards to run the test with no host PC |
| involvement. |
| |
| if EXAMPLES_NETTEST_TARGET2 |
| |
| config EXAMPLES_NETTEST_PROGNAME2 |
| string "Target2 program name" |
| default "nettest2" |
| ---help--- |
| This is the name of the Target2 program that will be used when the |
| NSH ELF program is installed. |
| |
| config EXAMPLES_NETTEST_PRIORITY2 |
| int "Target2 task priority" |
| default 100 |
| |
| config EXAMPLES_NETTEST_STACKSIZE2 |
| int "Target2 stack size" |
| default DEFAULT_TASK_STACKSIZE |
| |
| endif # EXAMPLES_NETTEST_TARGET2 |
| endif # !EXAMPLES_NETTEST_LOOPBACK |
| |
| if EXAMPLES_NETTEST_LOOPBACK |
| config EXAMPLES_NETTEST_DAEMON_STACKSIZE |
| int "Server daemon stack size" |
| default DEFAULT_TASK_STACKSIZE |
| |
| config EXAMPLES_NETTEST_DAEMON_PRIORITY |
| int "Server daemon priority" |
| default 100 |
| #endif |
| |
| endif # EXAMPLES_NETTEST_LOOPBACK |
| |
| config EXAMPLES_NETTEST_DEVNAME |
| string "Network device" |
| default "eth0" |
| |
| config EXAMPLES_NETTEST_PERFORMANCE |
| bool "Test for Performance" |
| default n |
| ---help--- |
| Configure the example to test for network performance. Default: Test |
| is for network functionality. |
| |
| choice |
| prompt "IP Domain" |
| default EXAMPLES_NETTEST_IPv4 if NET_IPv4 |
| default EXAMPLES_NETTEST_IPv6 if NET_IPv6 && !NET_IPv4 |
| |
| config EXAMPLES_NETTEST_IPv4 |
| bool "IPv4" |
| depends on NET_IPv4 |
| |
| config EXAMPLES_NETTEST_IPv6 |
| bool "IPv6" |
| depends on NET_IPv6 |
| |
| endchoice # IP Domain |
| |
| # No hardware initialization if loopback |
| |
| config EXAMPLES_NETTEST_INIT |
| bool "Initialize network" |
| default n if NSH_NETINIT |
| default y if !NSH_NETINIT |
| depends on !EXAMPLES_NETTEST_LOOPBACK |
| ---help--- |
| Include logic to initialize the network. This should not be done if |
| the network is already initialized when nettest runs. This is |
| usually the case, for example, when nettest is run as an NSH built- |
| in task. |
| |
| config EXAMPLES_NETTEST_NOMAC |
| bool "Use Canned MAC Address" |
| default n |
| depends on EXAMPLES_NETTEST_INIT |
| |
| if EXAMPLES_NETTEST_IPv4 |
| |
| comment "IPv4 addresses" |
| |
| if EXAMPLES_NETTEST_INIT |
| |
| config EXAMPLES_NETTEST_IPADDR |
| hex "Target IP address" |
| default 0x0a000002 |
| |
| config EXAMPLES_NETTEST_DRIPADDR |
| hex "Default Router IP address (Gateway)" |
| default 0x0a000001 |
| |
| config EXAMPLES_NETTEST_NETMASK |
| hex "Network Mask" |
| default 0xffffff00 |
| |
| endif # EXAMPLES_NETTEST_INIT |
| |
| # No server if loopback |
| |
| if !EXAMPLES_NETTEST_LOOPBACK |
| |
| config EXAMPLES_NETTEST_SERVERIP |
| hex "Server IP Address" |
| default 0x0a000001 if !EXAMPLES_NETTEST_SERVER |
| default 0x0a000002 if EXAMPLES_NETTEST_SERVER |
| ---help--- |
| IP address of the server. If the target is the server, then |
| EXAMPLES_NETTEST_SERVERIP should be the same as |
| EXAMPLES_NETTEST_IPADDR (default). If the target is the client, |
| then the default value of EXAMPLES_NETTEST_SERVERIP is set to the |
| host PC IP address (possibly the gateway address, |
| EXAMPLES_NETTEST_DRIPADDR?). |
| |
| endif # !EXAMPLES_NETTEST_LOOPBACK |
| endif # EXAMPLES_NETTEST_IPv4 |
| |
| if EXAMPLES_NETTEST_IPv6 |
| if !NET_ICMPv6_AUTOCONF |
| |
| comment "Target IPv6 address" |
| |
| if EXAMPLES_NETTEST_INIT |
| |
| config EXAMPLES_NETTEST_IPv6ADDR_1 |
| hex "[0]" |
| default 0xfc00 |
| range 0x0 0xffff |
| ---help--- |
| Target IPv6 address. This is a 16-bit integer value in host order. |
| Each of the eight values forming the full IP address must be |
| specified individually. This is the first of the 8-values. The |
| default for all eight values is fc00::2. |
| |
| config EXAMPLES_NETTEST_IPv6ADDR_2 |
| hex "[1]" |
| default 0x0000 |
| range 0x0 0xffff |
| ---help--- |
| Target IPv6 address. This is a 16-bit integer value in host order. |
| Each of the eight values forming the full IP address must be |
| specified individually. This is the second of the 8-values. The |
| default for all eight values is fc00::2. |
| |
| config EXAMPLES_NETTEST_IPv6ADDR_3 |
| hex "[2]" |
| default 0x0000 |
| range 0x0 0xffff |
| ---help--- |
| Target IPv6 address. This is a 16-bit integer value in host order. |
| Each of the eight values forming the full IP address must be |
| specified individually. This is the third of the 8-values. The |
| default for all eight values is fc00::2. |
| |
| config EXAMPLES_NETTEST_IPv6ADDR_4 |
| hex "[3]" |
| default 0x0000 |
| range 0x0 0xffff |
| ---help--- |
| Target IPv6 address. This is a 16-bit integer value in host order. |
| Each of the eight values forming the full IP address must be |
| specified individually. This is the fourth of the 8-values. The |
| default for all eight values is fc00::2. |
| |
| config EXAMPLES_NETTEST_IPv6ADDR_5 |
| hex "[4]" |
| default 0x0000 |
| range 0x0 0xffff |
| ---help--- |
| Target IPv6 address. This is a 16-bit integer value in host order. |
| Each of the eight values forming the full IP address must be |
| specified individually. This is the fifth of the 8-values. The |
| default for all eight values is fc00::2. |
| |
| config EXAMPLES_NETTEST_IPv6ADDR_6 |
| hex "[5]" |
| default 0x0000 |
| range 0x0 0xffff |
| ---help--- |
| Target IPv6 address. This is a 16-bit integer value in host order. |
| Each of the eight values forming the full IP address must be |
| specified individually. This is the sixth of the 8-values. The |
| default for all eight values is fc00::2. |
| |
| config EXAMPLES_NETTEST_IPv6ADDR_7 |
| hex "[6]" |
| default 0x0000 |
| range 0x0 0xffff |
| ---help--- |
| Target IPv6 address. This is a 16-bit integer value in host order. |
| Each of the eight values forming the full IP address must be |
| specified individually. This is the seventh of the 8-values. The |
| default for all eight values is fc00::2. |
| |
| config EXAMPLES_NETTEST_IPv6ADDR_8 |
| hex "[7]" |
| default 0x0002 |
| range 0x0 0xffff |
| ---help--- |
| Target IPv6 address. This is a 16-bit integer value in host order. |
| Each of the eight values forming the full IP address must be |
| specified individually. This is the last of the 8-values. The |
| default for all eight values is fc00::2. |
| |
| comment "Router IPv6 address" |
| |
| config EXAMPLES_NETTEST_DRIPv6ADDR_1 |
| hex "[0]" |
| default 0xfc00 |
| range 0x0 0xffff |
| ---help--- |
| Default router IP address (aka, Gateway). This is a 16-bit integer |
| value in host order. Each of the eight values forming the full IP |
| address must be specified individually. This is the first of the |
| 8-values. The default for all eight values is fc00::1. |
| |
| config EXAMPLES_NETTEST_DRIPv6ADDR_2 |
| hex "[1]" |
| default 0x0000 |
| range 0x0 0xffff |
| ---help--- |
| Default router IP address (aka, Gateway). This is a 16-bit integer |
| value in host order. Each of the eight values forming the full IP |
| address must be specified individually. This is the second of the |
| 8-values. The default for all eight values is fc00::1. |
| |
| config EXAMPLES_NETTEST_DRIPv6ADDR_3 |
| hex "[2]" |
| default 0x0000 |
| range 0x0 0xffff |
| ---help--- |
| Default router IP address (aka, Gateway). This is a 16-bit integer |
| value in host order. Each of the eight values forming the full IP |
| address must be specified individually. This is the third of the |
| 8-values. The default for all eight values is fc00::1. |
| |
| config EXAMPLES_NETTEST_DRIPv6ADDR_4 |
| hex "[3]" |
| default 0x0000 |
| range 0x0 0xffff |
| ---help--- |
| Default router IP address (aka, Gateway). This is a 16-bit integer |
| value in host order. Each of the eight values forming the full IP |
| address must be specified individually. This is the fourth of the |
| 8-values. The default for all eight values is fc00::1. |
| |
| config EXAMPLES_NETTEST_DRIPv6ADDR_5 |
| hex "[4]" |
| default 0x0000 |
| range 0x0 0xffff |
| ---help--- |
| Default router IP address (aka, Gateway). This is a 16-bit integer |
| value in host order. Each of the eight values forming the full IP |
| address must be specified individually. This is the fifth of the |
| 8-values. The default for all eight values is fc00::1. |
| |
| config EXAMPLES_NETTEST_DRIPv6ADDR_6 |
| hex "[5]" |
| default 0x0000 |
| range 0x0 0xffff |
| ---help--- |
| Default router IP address (aka, Gateway). This is a 16-bit integer |
| value in host order. Each of the eight values forming the full IP |
| address must be specified individually. This is the sixth of the |
| 8-values. The default for all eight values is fc00::1. |
| |
| config EXAMPLES_NETTEST_DRIPv6ADDR_7 |
| hex "[6]" |
| default 0x0000 |
| range 0x0 0xffff |
| ---help--- |
| Default router IP address (aka, Gateway). This is a 16-bit integer |
| value in host order. Each of the eight values forming the full IP |
| address must be specified individually. This is the seventh of the |
| 8-values. The default for all eight values is fc00::1. |
| |
| config EXAMPLES_NETTEST_DRIPv6ADDR_8 |
| hex "[7]" |
| default 0x0001 |
| range 0x0 0xffff |
| ---help--- |
| Default router IP address (aka, Gateway). This is a 16-bit integer |
| value in host order. Each of the eight values forming the full IP |
| address must be specified individually. This is the last of the |
| 8-values. The default for all eight values is fc00::1. |
| |
| comment "IPv6 Network mask" |
| |
| config EXAMPLES_NETTEST_IPv6NETMASK_1 |
| hex "[0]" |
| default 0xffff |
| range 0x0 0xffff |
| ---help--- |
| Network mask. This is a 16-bit integer value in host order. Each |
| of the eight values forming the full IP address must be specified |
| individually. This is the first of the 8-values. The default for |
| all eight values is fe00::0. |
| |
| config EXAMPLES_NETTEST_IPv6NETMASK_2 |
| hex "[1]" |
| default 0xffff |
| range 0x0 0xffff |
| ---help--- |
| Network mask. This is a 16-bit integer value in host order. Each |
| of the eight values forming the full IP address must be specified |
| individually. This is the second of the 8-values. The default for |
| all eight values is fe00::0. |
| |
| config EXAMPLES_NETTEST_IPv6NETMASK_3 |
| hex "[2]" |
| default 0xffff |
| range 0x0 0xffff |
| ---help--- |
| Network mask. This is a 16-bit integer value in host order. Each |
| of the eight values forming the full IP address must be specified |
| individually. This is the third of the 8-values. The default for |
| all eight values is fe00::0. |
| |
| config EXAMPLES_NETTEST_IPv6NETMASK_4 |
| hex "[3]" |
| default 0xffff |
| range 0x0 0xffff |
| ---help--- |
| Network mask. This is a 16-bit integer value in host order. Each |
| of the eight values forming the full IP address must be specified |
| individually. This is the fourth of the 8-values. The default for |
| all eight values is fe00::0. |
| |
| config EXAMPLES_NETTEST_IPv6NETMASK_5 |
| hex "[4]" |
| default 0xffff |
| range 0x0 0xffff |
| ---help--- |
| Network mask. This is a 16-bit integer value in host order. Each |
| of the eight values forming the full IP address must be specified |
| individually. This is the fifth of the 8-values. The default for |
| all eight values is fe00::0. |
| |
| config EXAMPLES_NETTEST_IPv6NETMASK_6 |
| hex "[5]" |
| default 0xffff |
| range 0x0 0xffff |
| ---help--- |
| Network mask. This is a 16-bit integer value in host order. Each |
| of the eight values forming the full IP address must be specified |
| individually. This is the sixth of the 8-values. The default for |
| all eight values is fe00::0. |
| |
| config EXAMPLES_NETTEST_IPv6NETMASK_7 |
| hex "[6]" |
| default 0xffff |
| range 0x0 0xffff |
| ---help--- |
| Network mask. This is a 16-bit integer value in host order. Each |
| of the eight values forming the full IP address must be specified |
| individually. This is the seventh of the 8-values. The default for |
| all eight values is fe00::0. |
| |
| config EXAMPLES_NETTEST_IPv6NETMASK_8 |
| hex "[7]" |
| default 0xff80 |
| range 0x0 0xffff |
| ---help--- |
| Network mask. This is a 16-bit integer value in host order. Each |
| of the eight values forming the full IP address must be specified |
| individually. This is the eighth of the 8-values. The default for |
| all eight values is fe00::0. |
| |
| endif # NET_ICMPv6_AUTOCONF |
| endif # EXAMPLES_NETTEST_INIT |
| |
| # Addresses are well known if loopback is used. |
| |
| if !EXAMPLES_NETTEST_LOOPBACK || !NET_LOOPBACK |
| |
| comment "Server IPv6 address" |
| |
| config EXAMPLES_NETTEST_SERVERIPv6ADDR_1 |
| hex "[0]" |
| default 0xfc00 |
| range 0x0 0xffff |
| ---help--- |
| IP address of the server. If the target is the server, then |
| EXAMPLES_NETTEST_SERVERIP should be the same as |
| EXAMPLES_NETTEST_IPADDR (default). If the target is the client, |
| then the default value of EXAMPLES_NETTEST_SERVERIP is set to the |
| host PC IP address (possibly the gateway address, |
| EXAMPLES_NETTEST_DRIPADDR?). |
| |
| This is a 16-bit integer value in host order. Each of the eight |
| values forming the full IP address must be specified individually. |
| This is the first of the 8-values. |
| |
| config EXAMPLES_NETTEST_SERVERIPv6ADDR_2 |
| hex "[1]" |
| default 0x0000 |
| range 0x0 0xffff |
| ---help--- |
| IP address of the server. If the target is the server, then |
| EXAMPLES_NETTEST_SERVERIP should be the same as |
| EXAMPLES_NETTEST_IPADDR (default). If the target is the client, |
| then the default value of EXAMPLES_NETTEST_SERVERIP is set to the |
| host PC IP address (possibly the gateway address, |
| EXAMPLES_NETTEST_DRIPADDR?). |
| |
| This is a 16-bit integer value in host order. Each of the eight |
| values forming the full IP address must be specified individually. |
| This is the second of the 8-values. |
| |
| config EXAMPLES_NETTEST_SERVERIPv6ADDR_3 |
| hex "[2]" |
| default 0x0000 |
| range 0x0 0xffff |
| ---help--- |
| IP address of the server. If the target is the server, then |
| EXAMPLES_NETTEST_SERVERIP should be the same as |
| EXAMPLES_NETTEST_IPADDR (default). If the target is the client, |
| then the default value of EXAMPLES_NETTEST_SERVERIP is set to the |
| host PC IP address (possibly the gateway address, |
| EXAMPLES_NETTEST_DRIPADDR?). |
| |
| This is a 16-bit integer value in host order. Each of the eight |
| values forming the full IP address must be specified individually. |
| This is the Third of the 8-values. |
| |
| config EXAMPLES_NETTEST_SERVERIPv6ADDR_4 |
| hex "[3]" |
| default 0x0000 |
| range 0x0 0xffff |
| ---help--- |
| IP address of the server. If the target is the server, then |
| EXAMPLES_NETTEST_SERVERIP should be the same as |
| EXAMPLES_NETTEST_IPADDR (default). If the target is the client, |
| then the default value of EXAMPLES_NETTEST_SERVERIP is set to the |
| host PC IP address (possibly the gateway address, |
| EXAMPLES_NETTEST_DRIPADDR?). |
| |
| This is a 16-bit integer value in host order. Each of the eight |
| values forming the full IP address must be specified individually. |
| This is the fourth of the 8-values. |
| |
| config EXAMPLES_NETTEST_SERVERIPv6ADDR_5 |
| hex "[4]" |
| default 0x0000 |
| range 0x0 0xffff |
| ---help--- |
| IP address of the server. If the target is the server, then |
| EXAMPLES_NETTEST_SERVERIP should be the same as |
| EXAMPLES_NETTEST_IPADDR (default). If the target is the client, |
| then the default value of EXAMPLES_NETTEST_SERVERIP is set to the |
| host PC IP address (possibly the gateway address, |
| EXAMPLES_NETTEST_DRIPADDR?). |
| |
| This is a 16-bit integer value in host order. Each of the eight |
| values forming the full IP address must be specified individually. |
| This is the fifth of the 8-values. |
| |
| config EXAMPLES_NETTEST_SERVERIPv6ADDR_6 |
| hex "[5]" |
| default 0x0000 |
| range 0x0 0xffff |
| ---help--- |
| IP address of the server. If the target is the server, then |
| EXAMPLES_NETTEST_SERVERIP should be the same as |
| EXAMPLES_NETTEST_IPADDR (default). If the target is the client, |
| then the default value of EXAMPLES_NETTEST_SERVERIP is set to the |
| host PC IP address (possibly the gateway address, |
| EXAMPLES_NETTEST_DRIPADDR?). |
| |
| This is a 16-bit integer value in host order. Each of the eight |
| values forming the full IP address must be specified individually. |
| This is the sixth of the 8-values. |
| |
| config EXAMPLES_NETTEST_SERVERIPv6ADDR_7 |
| hex "[6]" |
| default 0x0000 |
| range 0x0 0xffff |
| ---help--- |
| IP address of the server. If the target is the server, then |
| EXAMPLES_NETTEST_SERVERIP should be the same as |
| EXAMPLES_NETTEST_IPADDR (default). If the target is the client, |
| then the default value of EXAMPLES_NETTEST_SERVERIP is set to the |
| host PC IP address (possibly the gateway address, |
| EXAMPLES_NETTEST_DRIPADDR?). |
| |
| This is a 16-bit integer value in host order. Each of the eight |
| values forming the full IP address must be specified individually. |
| This is the seventh of the 8-values. |
| |
| config EXAMPLES_NETTEST_SERVERIPv6ADDR_8 |
| hex "[7]" |
| default 0x0001 if !EXAMPLES_NETTEST_SERVER |
| default 0x0002 if EXAMPLES_NETTEST_SERVER |
| range 0x0 0xffff |
| ---help--- |
| IP address of the server. If the target is the server, then |
| EXAMPLES_NETTEST_SERVERIP should be the same as |
| EXAMPLES_NETTEST_IPADDR (default). If the target is the client, |
| then the default value of EXAMPLES_NETTEST_SERVERIP is set to the |
| host PC IP address (possibly the gateway address, |
| EXAMPLES_NETTEST_DRIPADDR?). |
| |
| This is a 16-bit integer value in host order. Each of the eight |
| values forming the full IP address must be specified individually. |
| This is the last of the 8-values. |
| |
| endif # !EXAMPLES_NETTEST_LOOPBACK |
| endif # EXAMPLES_NETTEST_IPv6 |
| |
| config EXAMPLES_NETTEST_SERVER_PORTNO |
| int "Server port number" |
| default 5471 |
| |
| endif # EXAMPLES_NETTEST |