| /**************************************************************************** |
| * apps/nshlib/nsh_parse.c |
| * |
| * Copyright (C) 2007-2013 Gregory Nutt. All rights reserved. |
| * Author: Gregory Nutt <gnutt@nuttx.org> |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * 3. Neither the name NuttX nor the names of its contributors may be |
| * used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
| * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
| * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
| * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED |
| * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN |
| * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| * |
| ****************************************************************************/ |
| |
| /**************************************************************************** |
| * Included Files |
| ****************************************************************************/ |
| |
| #include <nuttx/config.h> |
| |
| #include <sys/stat.h> |
| |
| #include <stdint.h> |
| #include <stdbool.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <unistd.h> |
| #include <string.h> |
| #include <sched.h> |
| #include <fcntl.h> |
| #include <errno.h> |
| #include <debug.h> |
| |
| #include <nuttx/version.h> |
| |
| #ifndef CONFIG_NSH_DISABLEBG |
| # include <pthread.h> |
| #endif |
| |
| #ifdef CONFIG_NSH_BUILTIN_APPS |
| # include <nuttx/binfmt/builtin.h> |
| #endif |
| |
| #include <apps/nsh.h> |
| |
| #include "nsh.h" |
| #include "nsh_console.h" |
| |
| /**************************************************************************** |
| * Pre-processor Definitions |
| ****************************************************************************/ |
| |
| /* Argument list size |
| * |
| * argv[0]: The command name. |
| * argv[1]: The beginning of argument (up to CONFIG_NSH_MAXARGUMENTS) |
| * argv[argc-3]: Possibly '>' or '>>' |
| * argv[argc-2]: Possibly <file> |
| * argv[argc-1]: Possibly '&' (if pthreads are enabled) |
| * argv[argc]: NULL terminating pointer |
| * |
| * Maximum size is CONFIG_NSH_MAXARGUMENTS+5 |
| */ |
| |
| #ifndef CONFIG_NSH_DISABLEBG |
| # define MAX_ARGV_ENTRIES (CONFIG_NSH_MAXARGUMENTS+5) |
| #else |
| # define MAX_ARGV_ENTRIES (CONFIG_NSH_MAXARGUMENTS+4) |
| #endif |
| |
| /* Help command summary layout */ |
| |
| #define MAX_CMDLEN 12 |
| #define CMDS_PER_LINE 6 |
| |
| #define NUM_CMDS ((sizeof(g_cmdmap)/sizeof(struct cmdmap_s)) - 1) |
| #define NUM_CMD_ROWS ((NUM_CMDS + (CMDS_PER_LINE-1)) / CMDS_PER_LINE) |
| |
| /**************************************************************************** |
| * Private Types |
| ****************************************************************************/ |
| |
| struct cmdmap_s |
| { |
| const char *cmd; /* Name of the command */ |
| cmd_t handler; /* Function that handles the command */ |
| uint8_t minargs; /* Minimum number of arguments (including command) */ |
| uint8_t maxargs; /* Maximum number of arguments (including command) */ |
| const char *usage; /* Usage instructions for 'help' command */ |
| }; |
| |
| #ifndef CONFIG_NSH_DISABLEBG |
| struct cmdarg_s |
| { |
| FAR struct nsh_vtbl_s *vtbl; /* For front-end interaction */ |
| int fd; /* FD for output redirection */ |
| int argc; /* Number of arguments in argv */ |
| FAR char *argv[MAX_ARGV_ENTRIES]; /* Argument list */ |
| }; |
| #endif |
| |
| /**************************************************************************** |
| * Private Function Prototypes |
| ****************************************************************************/ |
| |
| #ifndef CONFIG_NSH_DISABLE_HELP |
| static int cmd_help(FAR struct nsh_vtbl_s *vtbl, int argc, char **argv); |
| #endif |
| |
| #ifndef CONFIG_NSH_DISABLE_EXIT |
| static int cmd_exit(FAR struct nsh_vtbl_s *vtbl, int argc, char **argv); |
| #endif |
| static int cmd_unrecognized(FAR struct nsh_vtbl_s *vtbl, int argc, char **argv); |
| |
| /**************************************************************************** |
| * Private Data |
| ****************************************************************************/ |
| |
| static const char g_delim[] = " \t\n"; |
| static const char g_redirect1[] = ">"; |
| static const char g_redirect2[] = ">>"; |
| static const char g_exitstatus[] = "$?"; |
| static const char g_success[] = "0"; |
| static const char g_failure[] = "1"; |
| |
| static const struct cmdmap_s g_cmdmap[] = |
| { |
| #if !defined(CONFIG_NSH_DISABLESCRIPT) && !defined(CONFIG_NSH_DISABLE_TEST) |
| { "[", cmd_lbracket, 4, CONFIG_NSH_MAXARGUMENTS, "<expression> ]" }, |
| #endif |
| |
| #ifndef CONFIG_NSH_DISABLE_HELP |
| { "?", cmd_help, 1, 1, NULL }, |
| #endif |
| |
| #if defined(CONFIG_NET) && defined(CONFIG_NET_ROUTE) && !defined(CONFIG_NSH_DISABLE_ADDROUTE) |
| { "addroute", cmd_addroute, 4, 4, "<target> <netmask> <router>" }, |
| #endif |
| |
| #if defined(CONFIG_NETUTILS_CODECS) && defined(CONFIG_CODECS_BASE64) |
| # ifndef CONFIG_NSH_DISABLE_BASE64DEC |
| { "base64dec", cmd_base64decode, 2, 4, "[-w] [-f] <string or filepath>" }, |
| # endif |
| # ifndef CONFIG_NSH_DISABLE_BASE64ENC |
| { "base64enc", cmd_base64encode, 2, 4, "[-w] [-f] <string or filepath>" }, |
| # endif |
| #endif |
| |
| #if CONFIG_NFILE_DESCRIPTORS > 0 |
| # ifndef CONFIG_NSH_DISABLE_CAT |
| { "cat", cmd_cat, 2, CONFIG_NSH_MAXARGUMENTS, "<path> [<path> [<path> ...]]" }, |
| # endif |
| #ifndef CONFIG_DISABLE_ENVIRON |
| # ifndef CONFIG_NSH_DISABLE_CD |
| { "cd", cmd_cd, 1, 2, "[<dir-path>|-|~|..]" }, |
| # endif |
| #endif |
| # ifndef CONFIG_NSH_DISABLE_CP |
| { "cp", cmd_cp, 3, 3, "<source-path> <dest-path>" }, |
| # endif |
| # ifndef CONFIG_NSH_DISABLE_CMP |
| { "cmp", cmd_cmp, 3, 3, "<path1> <path2>" }, |
| # endif |
| #endif |
| |
| #if defined (CONFIG_RTC) && !defined(CONFIG_DISABLE_CLOCK) && !defined(CONFIG_NSH_DISABLE_DATE) |
| { "date", cmd_date, 1, 3, "[-s \"MMM DD HH:MM:SS YYYY\"]" }, |
| #endif |
| |
| #if CONFIG_NFILE_DESCRIPTORS > 0 && !defined(CONFIG_NSH_DISABLE_DD) |
| { "dd", cmd_dd, 3, 6, "if=<infile> of=<outfile> [bs=<sectsize>] [count=<sectors>] [skip=<sectors>]" }, |
| # endif |
| |
| #if defined(CONFIG_NET) && defined(CONFIG_NET_ROUTE) && !defined(CONFIG_NSH_DISABLE_DELROUTE) |
| { "delroute", cmd_delroute, 3, 3, "<target> <netmask>" }, |
| #endif |
| |
| #if CONFIG_NFILE_DESCRIPTORS > 0 && !defined(CONFIG_DISABLE_MOUNTPOINT) && \ |
| defined(CONFIG_FS_READABLE) && !defined(CONFIG_NSH_DISABLE_DF) |
| #ifdef CONFIG_NSH_CMDOPT_DF_H |
| { "df", cmd_df, 1, 2, "[-h]" }, |
| #else |
| { "df", cmd_df, 1, 1, NULL }, |
| #endif |
| #endif |
| |
| #if CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_SYSLOG) && \ |
| defined(CONFIG_RAMLOG_SYSLOG) && !defined(CONFIG_NSH_DISABLE_DMESG) |
| { "dmesg", cmd_dmesg, 1, 1, NULL }, |
| #endif |
| |
| #ifndef CONFIG_NSH_DISABLE_ECHO |
| # ifndef CONFIG_DISABLE_ENVIRON |
| { "echo", cmd_echo, 0, CONFIG_NSH_MAXARGUMENTS, "[<string|$name> [<string|$name>...]]" }, |
| # else |
| { "echo", cmd_echo, 0, CONFIG_NSH_MAXARGUMENTS, "[<string> [<string>...]]" }, |
| # endif |
| #endif |
| |
| #ifndef CONFIG_NSH_DISABLE_EXEC |
| { "exec", cmd_exec, 2, 3, "<hex-address>" }, |
| #endif |
| #ifndef CONFIG_NSH_DISABLE_EXIT |
| { "exit", cmd_exit, 1, 1, NULL }, |
| #endif |
| |
| #ifndef CONFIG_NSH_DISABLE_FREE |
| { "free", cmd_free, 1, 1, NULL }, |
| #endif |
| |
| #if defined(CONFIG_NET_UDP) && CONFIG_NFILE_DESCRIPTORS > 0 |
| # ifndef CONFIG_NSH_DISABLE_GET |
| { "get", cmd_get, 4, 7, "[-b|-n] [-f <local-path>] -h <ip-address> <remote-path>" }, |
| # endif |
| #endif |
| |
| #ifndef CONFIG_NSH_DISABLE_HELP |
| # ifdef CONFIG_NSH_HELP_TERSE |
| { "help", cmd_help, 1, 2, "[<cmd>]" }, |
| #else |
| { "help", cmd_help, 1, 3, "[-v] [<cmd>]" }, |
| # endif |
| #endif |
| |
| #if CONFIG_NFILE_DESCRIPTORS > 0 |
| #ifndef CONFIG_NSH_DISABLE_HEXDUMP |
| { "hexdump", cmd_hexdump, 2, 2, "<file or device>" }, |
| #endif |
| #endif |
| |
| #ifdef CONFIG_NET |
| # ifndef CONFIG_NSH_DISABLE_IFCONFIG |
| { "ifconfig", cmd_ifconfig, 1, 11, "[nic_name [<ip-address>|dhcp]] [dr|gw|gateway <dr-address>] [netmask <net-mask>] [dns <dns-address>] [hw <hw-mac>]" }, |
| # endif |
| # ifndef CONFIG_NSH_DISABLE_IFUPDOWN |
| { "ifdown", cmd_ifdown, 2, 2, "<nic_name>" }, |
| { "ifup", cmd_ifup, 2, 2, "<nic_name>" }, |
| # endif |
| #endif |
| |
| #ifndef CONFIG_DISABLE_SIGNALS |
| # ifndef CONFIG_NSH_DISABLE_KILL |
| { "kill", cmd_kill, 3, 3, "-<signal> <pid>" }, |
| # endif |
| #endif |
| |
| #if CONFIG_NFILE_DESCRIPTORS > 0 && !defined(CONFIG_DISABLE_MOUNTPOINT) |
| # ifndef CONFIG_NSH_DISABLE_LOSETUP |
| { "losetup", cmd_losetup, 3, 6, "[-d <dev-path>] | [[-o <offset>] [-r] <dev-path> <file-path>]" }, |
| # endif |
| #endif |
| |
| #if CONFIG_NFILE_DESCRIPTORS > 0 |
| # ifndef CONFIG_NSH_DISABLE_LS |
| { "ls", cmd_ls, 1, 5, "[-lRs] <dir-path>" }, |
| # endif |
| #endif |
| |
| #ifndef CONFIG_NSH_DISABLE_MB |
| { "mb", cmd_mb, 2, 3, "<hex-address>[=<hex-value>][ <hex-byte-count>]" }, |
| #endif |
| |
| #if defined(CONFIG_NETUTILS_CODECS) && defined(CONFIG_CODECS_HASH_MD5) |
| # ifndef CONFIG_NSH_DISABLE_MD5 |
| { "md5", cmd_md5, 2, 3, "[-f] <string or filepath>" }, |
| # endif |
| #endif |
| |
| #if !defined(CONFIG_DISABLE_MOUNTPOINT) && CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_FS_WRITABLE) |
| # ifndef CONFIG_NSH_DISABLE_MKDIR |
| { "mkdir", cmd_mkdir, 2, 2, "<path>" }, |
| # endif |
| #endif |
| |
| #if !defined(CONFIG_DISABLE_MOUNTPOINT) && CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_FS_FAT) |
| # ifndef CONFIG_NSH_DISABLE_MKFATFS |
| { "mkfatfs", cmd_mkfatfs, 2, 2, "<path>" }, |
| # endif |
| #endif |
| |
| #if !defined(CONFIG_DISABLE_MOUNTPOINT) && CONFIG_NFILE_DESCRIPTORS > 0 |
| # ifndef CONFIG_NSH_DISABLE_MKFIFO |
| { "mkfifo", cmd_mkfifo, 2, 2, "<path>" }, |
| # endif |
| #endif |
| |
| #if !defined(CONFIG_DISABLE_MOUNTPOINT) && CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_FS_WRITABLE) |
| # ifndef CONFIG_NSH_DISABLE_MKRD |
| { "mkrd", cmd_mkrd, 2, 6, "[-m <minor>] [-s <sector-size>] <nsectors>" }, |
| # endif |
| #endif |
| |
| #if !defined(CONFIG_DISABLE_MOUNTPOINT) && CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_FS_SMARTFS) |
| # ifndef CONFIG_NSH_DISABLE_MKSMARTFS |
| #ifdef CONFIG_SMARTFS_MULTI_ROOT_DIRS |
| { "mksmartfs", cmd_mksmartfs, 2, 3, "<path> [<num-root-directories>]" }, |
| #else |
| { "mksmartfs", cmd_mksmartfs, 2, 2, "<path>" }, |
| #endif |
| # endif |
| #endif |
| |
| #ifndef CONFIG_NSH_DISABLE_MH |
| { "mh", cmd_mh, 2, 3, "<hex-address>[=<hex-value>][ <hex-byte-count>]" }, |
| #endif |
| |
| #if !defined(CONFIG_DISABLE_MOUNTPOINT) && CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_FS_READABLE) |
| # ifndef CONFIG_NSH_DISABLE_MOUNT |
| # ifdef CONFIG_NUTTX_KERNEL |
| { "mount", cmd_mount, 5, 5, "-t <fstype> [<block-device>] <mount-point>" }, |
| # else |
| { "mount", cmd_mount, 1, 5, "[-t <fstype> [<block-device>] <mount-point>]" }, |
| # endif |
| # endif |
| #endif |
| |
| #if !defined(CONFIG_DISABLE_MOUNTPOINT) && CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_FS_WRITABLE) |
| # ifndef CONFIG_NSH_DISABLE_MV |
| { "mv", cmd_mv, 3, 3, "<old-path> <new-path>" }, |
| # endif |
| #endif |
| |
| #ifndef CONFIG_NSH_DISABLE_MW |
| { "mw", cmd_mw, 2, 3, "<hex-address>[=<hex-value>][ <hex-byte-count>]" }, |
| #endif |
| |
| #if !defined(CONFIG_DISABLE_MOUNTPOINT) && CONFIG_NFILE_DESCRIPTORS > 0 && \ |
| defined(CONFIG_NET) && defined(CONFIG_NFS) |
| # ifndef CONFIG_NSH_DISABLE_NFSMOUNT |
| { "nfsmount", cmd_nfsmount, 4, 4, "<server-address> <mount-point> <remote-path>" }, |
| # endif |
| #endif |
| |
| #if defined(CONFIG_NET) && defined(CONFIG_NET_ICMP) && defined(CONFIG_NET_ICMP_PING) && \ |
| !defined(CONFIG_DISABLE_CLOCK) && !defined(CONFIG_DISABLE_SIGNALS) |
| # ifndef CONFIG_NSH_DISABLE_PING |
| { "ping", cmd_ping, 2, 6, "[-c <count>] [-i <interval>] <ip-address>" }, |
| # endif |
| #endif |
| |
| #ifndef CONFIG_NSH_DISABLE_PS |
| { "ps", cmd_ps, 1, 1, NULL }, |
| #endif |
| |
| #if defined(CONFIG_NET_UDP) && CONFIG_NFILE_DESCRIPTORS > 0 |
| # ifndef CONFIG_NSH_DISABLE_PUT |
| { "put", cmd_put, 4, 7, "[-b|-n] [-f <remote-path>] -h <ip-address> <local-path>" }, |
| # endif |
| #endif |
| |
| #if CONFIG_NFILE_DESCRIPTORS > 0 && !defined(CONFIG_DISABLE_ENVIRON) |
| # ifndef CONFIG_NSH_DISABLE_PWD |
| { "pwd", cmd_pwd, 1, 1, NULL }, |
| # endif |
| #endif |
| |
| #if !defined(CONFIG_DISABLE_MOUNTPOINT) && CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_FS_WRITABLE) |
| # ifndef CONFIG_NSH_DISABLE_RM |
| { "rm", cmd_rm, 2, 2, "<file-path>" }, |
| # endif |
| # ifndef CONFIG_NSH_DISABLE_RMDIR |
| { "rmdir", cmd_rmdir, 2, 2, "<dir-path>" }, |
| # endif |
| #endif |
| |
| #ifndef CONFIG_DISABLE_ENVIRON |
| # ifndef CONFIG_NSH_DISABLE_SET |
| { "set", cmd_set, 3, 3, "<name> <value>" }, |
| # endif |
| #endif |
| |
| #if CONFIG_NFILE_DESCRIPTORS > 0 && CONFIG_NFILE_STREAMS > 0 && !defined(CONFIG_NSH_DISABLESCRIPT) |
| # ifndef CONFIG_NSH_DISABLE_SH |
| { "sh", cmd_sh, 2, 2, "<script-path>" }, |
| # endif |
| #endif |
| |
| #ifndef CONFIG_DISABLE_SIGNALS |
| # ifndef CONFIG_NSH_DISABLE_SLEEP |
| { "sleep", cmd_sleep, 2, 2, "<sec>" }, |
| # endif |
| #endif |
| |
| #if !defined(CONFIG_NSH_DISABLESCRIPT) && !defined(CONFIG_NSH_DISABLE_TEST) |
| { "test", cmd_test, 3, CONFIG_NSH_MAXARGUMENTS, "<expression>" }, |
| #endif |
| |
| #if !defined(CONFIG_DISABLE_MOUNTPOINT) && CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_FS_READABLE) |
| # ifndef CONFIG_NSH_DISABLE_UMOUNT |
| { "umount", cmd_umount, 2, 2, "<dir-path>" }, |
| # endif |
| #endif |
| |
| #ifndef CONFIG_DISABLE_ENVIRON |
| # ifndef CONFIG_NSH_DISABLE_UNSET |
| { "unset", cmd_unset, 2, 2, "<name>" }, |
| # endif |
| #endif |
| |
| #if defined(CONFIG_NETUTILS_CODECS) && defined(CONFIG_CODECS_URLCODE) |
| # ifndef CONFIG_NSH_DISABLE_URLDECODE |
| { "urldecode", cmd_urldecode, 2, 3, "[-f] <string or filepath>" }, |
| # endif |
| # ifndef CONFIG_NSH_DISABLE_URLENCODE |
| { "urlencode", cmd_urlencode, 2, 3, "[-f] <string or filepath>" }, |
| # endif |
| #endif |
| |
| #ifndef CONFIG_DISABLE_SIGNALS |
| # ifndef CONFIG_NSH_DISABLE_USLEEP |
| { "usleep", cmd_usleep, 2, 2, "<usec>" }, |
| # endif |
| #endif |
| |
| #if defined(CONFIG_NET_TCP) && CONFIG_NFILE_DESCRIPTORS > 0 |
| # ifndef CONFIG_NSH_DISABLE_WGET |
| { "wget", cmd_wget, 2, 4, "[-o <local-path>] <url>" }, |
| # endif |
| #endif |
| |
| #ifndef CONFIG_NSH_DISABLE_XD |
| { "xd", cmd_xd, 3, 3, "<hex-address> <byte-count>" }, |
| #endif |
| |
| { NULL, NULL, 1, 1, NULL } |
| }; |
| |
| /**************************************************************************** |
| * Public Data |
| ****************************************************************************/ |
| |
| /* If NuttX versioning information is available, Include that information |
| * in the NSH greeting. |
| */ |
| |
| #if CONFIG_VERSION_MAJOR != 0 || CONFIG_VERSION_MINOR != 0 |
| const char g_nshgreeting[] = "\nNuttShell (NSH) NuttX-" CONFIG_VERSION_STRING "\n"; |
| #else |
| const char g_nshgreeting[] = "\nNuttShell (NSH)\n"; |
| #endif |
| |
| /* Telnet login prompts */ |
| |
| #if defined(CONFIG_NSH_TELNET_LOGIN) && defined(CONFIG_NSH_TELNET) |
| const char g_telnetgreeting[] = "\nWelcome to NuttShell(NSH) Telnet Server...\n"; |
| const char g_userprompt[] = "login: "; |
| const char g_passwordprompt[] = "password: "; |
| const char g_loginsuccess[] = "\nUser Logged-in!\n"; |
| const char g_badcredentials[] = "\nInvalid username or password\n"; |
| const char g_loginfailure[] = "Login failed!\n"; |
| #endif |
| |
| /* The NSH prompt */ |
| |
| const char g_nshprompt[] = "nsh> "; |
| |
| /* Common, message formats */ |
| |
| const char g_nshsyntax[] = "nsh: %s: syntax error\n"; |
| const char g_fmtargrequired[] = "nsh: %s: missing required argument(s)\n"; |
| const char g_fmtarginvalid[] = "nsh: %s: argument invalid\n"; |
| const char g_fmtargrange[] = "nsh: %s: value out of range\n"; |
| const char g_fmtcmdnotfound[] = "nsh: %s: command not found\n"; |
| const char g_fmtnosuch[] = "nsh: %s: no such %s: %s\n"; |
| const char g_fmttoomanyargs[] = "nsh: %s: too many arguments\n"; |
| const char g_fmtdeepnesting[] = "nsh: %s: nesting too deep\n"; |
| const char g_fmtcontext[] = "nsh: %s: not valid in this context\n"; |
| #ifdef CONFIG_NSH_STRERROR |
| const char g_fmtcmdfailed[] = "nsh: %s: %s failed: %s\n"; |
| #else |
| const char g_fmtcmdfailed[] = "nsh: %s: %s failed: %d\n"; |
| #endif |
| const char g_fmtcmdoutofmemory[] = "nsh: %s: out of memory\n"; |
| const char g_fmtinternalerror[] = "nsh: %s: Internal error\n"; |
| #ifndef CONFIG_DISABLE_SIGNALS |
| const char g_fmtsignalrecvd[] = "nsh: %s: Interrupted by signal\n"; |
| #endif |
| |
| /**************************************************************************** |
| * Private Functions |
| ****************************************************************************/ |
| |
| /**************************************************************************** |
| * Name: help_cmdlist |
| ****************************************************************************/ |
| |
| #ifndef CONFIG_NSH_DISABLE_HELP |
| static inline void help_cmdlist(FAR struct nsh_vtbl_s *vtbl) |
| { |
| int i; |
| int j; |
| int k; |
| |
| /* Print the command name in NUM_CMD_ROWS rows with CMDS_PER_LINE commands |
| * on each line. |
| */ |
| |
| for (i = 0; i < NUM_CMD_ROWS; i++) |
| { |
| nsh_output(vtbl, " "); |
| for (j = 0, k = i; j < CMDS_PER_LINE && k < NUM_CMDS; j++, k += NUM_CMD_ROWS) |
| { |
| #ifdef CONFIG_NOPRINTF_FIELDWIDTH |
| nsh_output(vtbl, "%s\t", g_cmdmap[k].cmd); |
| #else |
| nsh_output(vtbl, "%-12s", g_cmdmap[k].cmd); |
| #endif |
| } |
| |
| nsh_output(vtbl, "\n"); |
| } |
| } |
| #endif |
| |
| /**************************************************************************** |
| * Name: help_usage |
| ****************************************************************************/ |
| |
| #if !defined(CONFIG_NSH_DISABLE_HELP) && !defined(CONFIG_NSH_HELP_TERSE) |
| static inline void help_usage(FAR struct nsh_vtbl_s *vtbl) |
| { |
| nsh_output(vtbl, "NSH command forms:\n"); |
| #ifndef CONFIG_NSH_DISABLEBG |
| nsh_output(vtbl, " [nice [-d <niceness>>]] <cmd> [> <file>|>> <file>] [&]\n"); |
| #else |
| nsh_output(vtbl, " <cmd> [> <file>|>> <file>]\n"); |
| #endif |
| #ifndef CONFIG_NSH_DISABLESCRIPT |
| nsh_output(vtbl, "OR\n"); |
| nsh_output(vtbl, " if <cmd>\n"); |
| nsh_output(vtbl, " then\n"); |
| nsh_output(vtbl, " [sequence of <cmd>]\n"); |
| nsh_output(vtbl, " else\n"); |
| nsh_output(vtbl, " [sequence of <cmd>]\n"); |
| nsh_output(vtbl, " fi\n\n"); |
| #endif |
| } |
| #endif |
| |
| /**************************************************************************** |
| * Name: help_showcmd |
| ****************************************************************************/ |
| |
| #ifndef CONFIG_NSH_DISABLE_HELP |
| static void help_showcmd(FAR struct nsh_vtbl_s *vtbl, |
| FAR const struct cmdmap_s *cmdmap) |
| { |
| if (cmdmap->usage) |
| { |
| nsh_output(vtbl, " %s %s\n", cmdmap->cmd, cmdmap->usage); |
| } |
| else |
| { |
| nsh_output(vtbl, " %s\n", cmdmap->cmd); |
| } |
| } |
| #endif |
| |
| /**************************************************************************** |
| * Name: help_cmd |
| ****************************************************************************/ |
| |
| #ifndef CONFIG_NSH_DISABLE_HELP |
| static int help_cmd(FAR struct nsh_vtbl_s *vtbl, FAR const char *cmd) |
| { |
| FAR const struct cmdmap_s *cmdmap; |
| |
| /* Find the command in the command table */ |
| |
| for (cmdmap = g_cmdmap; cmdmap->cmd; cmdmap++) |
| { |
| /* Is this the one we are looking for? */ |
| |
| if (strcmp(cmdmap->cmd, cmd) == 0) |
| { |
| /* Yes... show it */ |
| |
| nsh_output(vtbl, "%s usage:", cmd); |
| help_showcmd(vtbl, cmdmap); |
| return OK; |
| } |
| } |
| |
| nsh_output(vtbl, g_fmtcmdnotfound, cmd); |
| return ERROR; |
| } |
| #endif |
| |
| /**************************************************************************** |
| * Name: help_allcmds |
| ****************************************************************************/ |
| |
| #if !defined(CONFIG_NSH_DISABLE_HELP) && !defined(CONFIG_NSH_HELP_TERSE) |
| static inline void help_allcmds(FAR struct nsh_vtbl_s *vtbl) |
| { |
| FAR const struct cmdmap_s *cmdmap; |
| |
| /* Show all of the commands in the command table */ |
| |
| for (cmdmap = g_cmdmap; cmdmap->cmd; cmdmap++) |
| { |
| help_showcmd(vtbl, cmdmap); |
| } |
| } |
| #endif |
| |
| /**************************************************************************** |
| * Name: help_builtins |
| ****************************************************************************/ |
| |
| #ifndef CONFIG_NSH_DISABLE_HELP |
| static inline void help_builtins(FAR struct nsh_vtbl_s *vtbl) |
| { |
| #ifdef CONFIG_NSH_BUILTIN_APPS |
| FAR const char *name; |
| int i; |
| |
| /* List the set of available built-in commands */ |
| |
| nsh_output(vtbl, "\nBuiltin Apps:\n"); |
| for (i = 0; (name = builtin_getname(i)) != NULL; i++) |
| { |
| nsh_output(vtbl, " %s\n", name); |
| } |
| #endif |
| } |
| #endif |
| |
| /**************************************************************************** |
| * Name: cmd_help |
| ****************************************************************************/ |
| |
| #ifndef CONFIG_NSH_DISABLE_HELP |
| static int cmd_help(FAR struct nsh_vtbl_s *vtbl, int argc, char **argv) |
| { |
| FAR const char *cmd = NULL; |
| #ifndef CONFIG_NSH_HELP_TERSE |
| bool verbose = false; |
| int i; |
| #endif |
| |
| /* The command may be followed by a verbose option */ |
| |
| #ifndef CONFIG_NSH_HELP_TERSE |
| i = 1; |
| if (argc > i) |
| { |
| if (strcmp(argv[i], "-v") == 0) |
| { |
| verbose = true; |
| i++; |
| } |
| } |
| |
| /* The command line may end with a command name */ |
| |
| if (argc > i) |
| { |
| cmd = argv[i]; |
| } |
| |
| /* Show the generic usage if verbose is requested */ |
| |
| if (verbose) |
| { |
| help_usage(vtbl); |
| } |
| #else |
| if (argc > 1) |
| { |
| cmd = argv[1]; |
| } |
| #endif |
| |
| /* Are we showing help on a single command? */ |
| |
| if (cmd) |
| { |
| /* Yes.. show the single command */ |
| |
| help_cmd(vtbl, cmd); |
| } |
| else |
| { |
| /* In verbose mode, show detailed help for all commands */ |
| |
| #ifndef CONFIG_NSH_HELP_TERSE |
| if (verbose) |
| { |
| nsh_output(vtbl, "Where <cmd> is one of:\n"); |
| help_allcmds(vtbl); |
| } |
| |
| /* Otherwise, just show the list of command names */ |
| |
| else |
| #endif |
| { |
| help_cmd(vtbl, "help"); |
| nsh_output(vtbl, "\n"); |
| help_cmdlist(vtbl); |
| } |
| |
| /* And show the list of built-in applications */ |
| |
| help_builtins(vtbl); |
| } |
| |
| return OK; |
| } |
| #endif |
| |
| /**************************************************************************** |
| * Name: cmd_unrecognized |
| ****************************************************************************/ |
| |
| static int cmd_unrecognized(FAR struct nsh_vtbl_s *vtbl, int argc, char **argv) |
| { |
| nsh_output(vtbl, g_fmtcmdnotfound, argv[0]); |
| return ERROR; |
| } |
| |
| /**************************************************************************** |
| * Name: cmd_exit |
| ****************************************************************************/ |
| |
| #ifndef CONFIG_NSH_DISABLE_EXIT |
| static int cmd_exit(FAR struct nsh_vtbl_s *vtbl, int argc, char **argv) |
| { |
| nsh_exit(vtbl, 0); |
| return OK; |
| } |
| #endif |
| |
| /**************************************************************************** |
| * Name: nsh_execute |
| * |
| * Description: |
| * Execute the command in argv[0] |
| * |
| * Returned Value: |
| * -1 (ERRROR) if the command was unsuccessful |
| * 0 (OK) if the command was successful |
| * |
| ****************************************************************************/ |
| |
| static int nsh_execute(FAR struct nsh_vtbl_s *vtbl, int argc, char *argv[]) |
| { |
| const struct cmdmap_s *cmdmap; |
| const char *cmd; |
| cmd_t handler = cmd_unrecognized; |
| int ret; |
| |
| /* The form of argv is: |
| * |
| * argv[0]: The command name. This is argv[0] when the arguments |
| * are, finally, received by the command vtblr |
| * argv[1]: The beginning of argument (up to CONFIG_NSH_MAXARGUMENTS) |
| * argv[argc]: NULL terminating pointer |
| */ |
| |
| cmd = argv[0]; |
| |
| /* See if the command is one that we understand */ |
| |
| for (cmdmap = g_cmdmap; cmdmap->cmd; cmdmap++) |
| { |
| if (strcmp(cmdmap->cmd, cmd) == 0) |
| { |
| /* Check if a valid number of arguments was provided. We |
| * do this simple, imperfect checking here so that it does |
| * not have to be performed in each command. |
| */ |
| |
| if (argc < cmdmap->minargs) |
| { |
| /* Fewer than the minimum number were provided */ |
| |
| nsh_output(vtbl, g_fmtargrequired, cmd); |
| return ERROR; |
| } |
| else if (argc > cmdmap->maxargs) |
| { |
| /* More than the maximum number were provided */ |
| |
| nsh_output(vtbl, g_fmttoomanyargs, cmd); |
| return ERROR; |
| } |
| else |
| { |
| /* A valid number of arguments were provided (this does |
| * not mean they are right). |
| */ |
| |
| handler = cmdmap->handler; |
| break; |
| } |
| } |
| } |
| |
| ret = handler(vtbl, argc, argv); |
| return ret; |
| } |
| |
| /**************************************************************************** |
| * Name: nsh_releaseargs |
| ****************************************************************************/ |
| |
| #ifndef CONFIG_NSH_DISABLEBG |
| static void nsh_releaseargs(struct cmdarg_s *arg) |
| { |
| FAR struct nsh_vtbl_s *vtbl = arg->vtbl; |
| int i; |
| |
| #if CONFIG_NFILE_STREAMS > 0 |
| /* If the output was redirected, then file descriptor should |
| * be closed. The created task has its one, independent copy of |
| * the file descriptor |
| */ |
| |
| if (vtbl->np.np_redirect) |
| { |
| (void)close(arg->fd); |
| } |
| #endif |
| |
| /* Released the cloned vtbl instance */ |
| |
| nsh_release(vtbl); |
| |
| /* Release the cloned args */ |
| |
| for (i = 0; i < arg->argc; i++) |
| { |
| free(arg->argv[i]); |
| } |
| free(arg); |
| } |
| #endif |
| |
| /**************************************************************************** |
| * Name: nsh_child |
| ****************************************************************************/ |
| |
| #ifndef CONFIG_NSH_DISABLEBG |
| static pthread_addr_t nsh_child(pthread_addr_t arg) |
| { |
| struct cmdarg_s *carg = (struct cmdarg_s *)arg; |
| int ret; |
| |
| dbg("BG %s\n", carg->argv[0]); |
| |
| /* Execute the specified command on the child thread */ |
| |
| ret = nsh_execute(carg->vtbl, carg->argc, carg->argv); |
| |
| /* Released the cloned arguments */ |
| |
| dbg("BG %s complete\n", carg->argv[0]); |
| nsh_releaseargs(carg); |
| return (void*)ret; |
| } |
| #endif |
| |
| /**************************************************************************** |
| * Name: nsh_cloneargs |
| ****************************************************************************/ |
| |
| #ifndef CONFIG_NSH_DISABLEBG |
| static inline struct cmdarg_s *nsh_cloneargs(FAR struct nsh_vtbl_s *vtbl, |
| int fd, int argc, char *argv[]) |
| { |
| struct cmdarg_s *ret = (struct cmdarg_s *)zalloc(sizeof(struct cmdarg_s)); |
| int i; |
| |
| if (ret) |
| { |
| ret->vtbl = vtbl; |
| ret->fd = fd; |
| ret->argc = argc; |
| |
| for (i = 0; i < argc; i++) |
| { |
| ret->argv[i] = strdup(argv[i]); |
| } |
| } |
| return ret; |
| } |
| #endif |
| |
| /**************************************************************************** |
| * Name: nsh_argument |
| ****************************************************************************/ |
| |
| char *nsh_argument(FAR struct nsh_vtbl_s *vtbl, char **saveptr) |
| { |
| char *pbegin = *saveptr; |
| char *pend = NULL; |
| const char *term; |
| #ifndef CONFIG_DISABLE_ENVIRON |
| bool quoted = false; |
| #endif |
| |
| /* Find the beginning of the next token */ |
| |
| for (; |
| *pbegin && strchr(g_delim, *pbegin) != NULL; |
| pbegin++); |
| |
| /* If we are at the end of the string with nothing |
| * but delimiters found, then return NULL. |
| */ |
| |
| if (!*pbegin) |
| { |
| return NULL; |
| } |
| |
| /* Does the token begin with '>' -- redirection of output? */ |
| |
| if (*pbegin == '>') |
| { |
| /* Yes.. does it begin with ">>"? */ |
| |
| if (*(pbegin + 1) == '>') |
| { |
| *saveptr = pbegin + 2; |
| pbegin = (char*)g_redirect2; |
| } |
| else |
| { |
| *saveptr = pbegin + 1; |
| pbegin = (char*)g_redirect1; |
| } |
| } |
| |
| /* Does the token begin with '#' -- comment */ |
| |
| else if (*pbegin == '#') |
| { |
| /* Return NULL meaning that we are at the end of the line */ |
| |
| *saveptr = pbegin; |
| pbegin = NULL; |
| } |
| else |
| { |
| /* Otherwise, we are going to have to parse to find the end of |
| * the token. Does the token begin with '"'? |
| */ |
| |
| if (*pbegin == '"') |
| { |
| /* Yes.. then only another '"' can terminate the string */ |
| |
| pbegin++; |
| term = "\""; |
| #ifndef CONFIG_DISABLE_ENVIRON |
| quoted = true; |
| #endif |
| } |
| else |
| { |
| /* No, then any of the usual terminators will terminate the argument */ |
| |
| term = g_delim; |
| } |
| |
| /* Find the end of the string */ |
| |
| for (pend = pbegin + 1; |
| *pend && strchr(term, *pend) == NULL; |
| pend++); |
| |
| /* pend either points to the end of the string or to |
| * the first delimiter after the string. |
| */ |
| |
| if (*pend) |
| { |
| /* Turn the delimiter into a null terminator */ |
| |
| *pend++ = '\0'; |
| } |
| |
| /* Save the pointer where we left off */ |
| |
| *saveptr = pend; |
| |
| #ifndef CONFIG_DISABLE_ENVIRON |
| /* Check for references to environment variables */ |
| |
| if (pbegin[0] == '$' && !quoted) |
| { |
| /* Check for built-in variables */ |
| |
| if (strcmp(pbegin, g_exitstatus) == 0) |
| { |
| if (vtbl->np.np_fail) |
| { |
| return (char*)g_failure; |
| } |
| else |
| { |
| return (char*)g_success; |
| } |
| } |
| |
| /* Not a built-in? Return the value of the environment variable with this name */ |
| |
| else |
| { |
| char *value = getenv(pbegin+1); |
| if (value) |
| { |
| return value; |
| } |
| else |
| { |
| return (char*)""; |
| } |
| } |
| } |
| #endif |
| } |
| |
| /* Return the beginning of the token. */ |
| |
| return pbegin; |
| } |
| |
| /**************************************************************************** |
| * Name: nsh_cmdenabled |
| ****************************************************************************/ |
| |
| #ifndef CONFIG_NSH_DISABLESCRIPT |
| static inline bool nsh_cmdenabled(FAR struct nsh_vtbl_s *vtbl) |
| { |
| struct nsh_parser_s *np = &vtbl->np; |
| bool ret = !np->np_st[np->np_ndx].ns_disabled; |
| if (ret) |
| { |
| switch (np->np_st[np->np_ndx].ns_state) |
| { |
| case NSH_PARSER_NORMAL : |
| case NSH_PARSER_IF: |
| default: |
| break; |
| |
| case NSH_PARSER_THEN: |
| ret = !np->np_st[np->np_ndx].ns_ifcond; |
| break; |
| |
| case NSH_PARSER_ELSE: |
| ret = np->np_st[np->np_ndx].ns_ifcond; |
| break; |
| } |
| } |
| return ret; |
| } |
| #endif |
| |
| /**************************************************************************** |
| * Name: nsh_ifthenelse |
| ****************************************************************************/ |
| |
| #ifndef CONFIG_NSH_DISABLESCRIPT |
| static inline int nsh_ifthenelse(FAR struct nsh_vtbl_s *vtbl, FAR char **ppcmd, FAR char **saveptr) |
| { |
| struct nsh_parser_s *np = &vtbl->np; |
| FAR char *cmd = *ppcmd; |
| bool disabled; |
| |
| if (cmd) |
| { |
| /* Check if the command is preceeded by "if" */ |
| |
| if (strcmp(cmd, "if") == 0) |
| { |
| /* Get the cmd following the if */ |
| |
| *ppcmd = nsh_argument(vtbl, saveptr); |
| if (!*ppcmd) |
| { |
| nsh_output(vtbl, g_fmtarginvalid, "if"); |
| goto errout; |
| } |
| |
| /* Verify that "if" is valid in this context */ |
| |
| if (np->np_st[np->np_ndx].ns_state != NSH_PARSER_NORMAL && |
| np->np_st[np->np_ndx].ns_state != NSH_PARSER_THEN && |
| np->np_st[np->np_ndx].ns_state != NSH_PARSER_ELSE) |
| { |
| nsh_output(vtbl, g_fmtcontext, "if"); |
| goto errout; |
| } |
| |
| /* Check if we have exceeded the maximum depth of nesting */ |
| |
| if (np->np_ndx >= CONFIG_NSH_NESTDEPTH-1) |
| { |
| nsh_output(vtbl, g_fmtdeepnesting, "if"); |
| goto errout; |
| } |
| |
| /* "Push" the old state and set the new state */ |
| |
| disabled = !nsh_cmdenabled(vtbl); |
| np->np_ndx++; |
| np->np_st[np->np_ndx].ns_state = NSH_PARSER_IF; |
| np->np_st[np->np_ndx].ns_disabled = disabled; |
| np->np_st[np->np_ndx].ns_ifcond = false; |
| } |
| else if (strcmp(cmd, "then") == 0) |
| { |
| /* Get the cmd following the then -- there shouldn't be one */ |
| |
| *ppcmd = nsh_argument(vtbl, saveptr); |
| if (*ppcmd) |
| { |
| nsh_output(vtbl, g_fmtarginvalid, "then"); |
| goto errout; |
| } |
| |
| /* Verify that "then" is valid in this context */ |
| |
| if (np->np_st[np->np_ndx].ns_state != NSH_PARSER_IF) |
| { |
| nsh_output(vtbl, g_fmtcontext, "then"); |
| goto errout; |
| } |
| np->np_st[np->np_ndx].ns_state = NSH_PARSER_THEN; |
| } |
| else if (strcmp(cmd, "else") == 0) |
| { |
| /* Get the cmd following the else -- there shouldn't be one */ |
| |
| *ppcmd = nsh_argument(vtbl, saveptr); |
| if (*ppcmd) |
| { |
| nsh_output(vtbl, g_fmtarginvalid, "else"); |
| goto errout; |
| } |
| |
| /* Verify that "then" is valid in this context */ |
| |
| if (np->np_st[np->np_ndx].ns_state != NSH_PARSER_THEN) |
| { |
| nsh_output(vtbl, g_fmtcontext, "else"); |
| goto errout; |
| } |
| np->np_st[np->np_ndx].ns_state = NSH_PARSER_ELSE; |
| } |
| else if (strcmp(cmd, "fi") == 0) |
| { |
| /* Get the cmd following the fi -- there should be one */ |
| |
| *ppcmd = nsh_argument(vtbl, saveptr); |
| if (*ppcmd) |
| { |
| nsh_output(vtbl, g_fmtarginvalid, "fi"); |
| goto errout; |
| } |
| |
| /* Verify that "fi" is valid in this context */ |
| |
| if (np->np_st[np->np_ndx].ns_state != NSH_PARSER_THEN && |
| np->np_st[np->np_ndx].ns_state != NSH_PARSER_ELSE) |
| { |
| nsh_output(vtbl, g_fmtcontext, "fi"); |
| goto errout; |
| } |
| |
| if (np->np_ndx < 1) /* Shouldn't happen */ |
| { |
| nsh_output(vtbl, g_fmtinternalerror, "if"); |
| goto errout; |
| } |
| |
| /* "Pop" the previous state */ |
| |
| np->np_ndx--; |
| } |
| else if (np->np_st[np->np_ndx].ns_state == NSH_PARSER_IF) |
| { |
| nsh_output(vtbl, g_fmtcontext, cmd); |
| goto errout; |
| } |
| } |
| return OK; |
| |
| errout: |
| np->np_ndx = 0; |
| np->np_st[0].ns_state = NSH_PARSER_NORMAL; |
| np->np_st[0].ns_disabled = false; |
| np->np_st[0].ns_ifcond = false; |
| return ERROR; |
| } |
| #endif |
| |
| /**************************************************************************** |
| * Name: nsh_saveresult |
| ****************************************************************************/ |
| |
| static inline int nsh_saveresult(FAR struct nsh_vtbl_s *vtbl, bool result) |
| { |
| struct nsh_parser_s *np = &vtbl->np; |
| |
| #ifndef CONFIG_NSH_DISABLESCRIPT |
| if (np->np_st[np->np_ndx].ns_state == NSH_PARSER_IF) |
| { |
| np->np_fail = false; |
| np->np_st[np->np_ndx].ns_ifcond = result; |
| return OK; |
| } |
| else |
| #endif |
| { |
| np->np_fail = result; |
| return result ? ERROR : OK; |
| } |
| } |
| |
| /**************************************************************************** |
| * Name: nsh_nice |
| ****************************************************************************/ |
| |
| #ifndef CONFIG_NSH_DISABLEBG |
| static inline int nsh_nice(FAR struct nsh_vtbl_s *vtbl, FAR char **ppcmd, FAR char **saveptr) |
| { |
| FAR char *cmd = *ppcmd; |
| |
| vtbl->np.np_nice = 0; |
| if (cmd) |
| { |
| /* Check if the command is preceded by "nice" */ |
| |
| if (strcmp(cmd, "nice") == 0) |
| { |
| /* Nicenesses range from -20 (most favorable scheduling) to 19 |
| * (least favorable). Default is 10. |
| */ |
| |
| vtbl->np.np_nice = 10; |
| |
| /* Get the cmd (or -d option of nice command) */ |
| |
| cmd = nsh_argument(vtbl, saveptr); |
| if (cmd && strcmp(cmd, "-d") == 0) |
| { |
| FAR char *val = nsh_argument(vtbl, saveptr); |
| if (val) |
| { |
| char *endptr; |
| vtbl->np.np_nice = (int)strtol(val, &endptr, 0); |
| if (vtbl->np.np_nice > 19 || vtbl->np.np_nice < -20 || |
| endptr == val || *endptr != '\0') |
| { |
| nsh_output(vtbl, g_fmtarginvalid, "nice"); |
| return ERROR; |
| } |
| cmd = nsh_argument(vtbl, saveptr); |
| } |
| } |
| |
| /* Return the real command name */ |
| |
| *ppcmd = cmd; |
| } |
| } |
| return OK; |
| } |
| #endif |
| |
| /**************************************************************************** |
| * Public Functions |
| ****************************************************************************/ |
| |
| /**************************************************************************** |
| * Name: nsh_parse |
| * |
| * Description: |
| * This function parses and executes one NSH command. |
| * |
| ****************************************************************************/ |
| |
| int nsh_parse(FAR struct nsh_vtbl_s *vtbl, char *cmdline) |
| { |
| FAR char *argv[MAX_ARGV_ENTRIES]; |
| FAR char *saveptr; |
| FAR char *cmd; |
| #if CONFIG_NFILE_STREAMS > 0 |
| FAR char *redirfile = NULL; |
| int oflags = 0; |
| int fd = -1; |
| #endif |
| int argc; |
| int ret; |
| |
| /* Initialize parser state */ |
| |
| memset(argv, 0, MAX_ARGV_ENTRIES*sizeof(FAR char *)); |
| #ifndef CONFIG_NSH_DISABLEBG |
| vtbl->np.np_bg = false; |
| #endif |
| #if CONFIG_NFILE_STREAMS > 0 |
| vtbl->np.np_redirect = false; |
| #endif |
| |
| /* Parse out the command at the beginning of the line */ |
| |
| saveptr = cmdline; |
| cmd = nsh_argument(vtbl, &saveptr); |
| |
| /* Handler if-then-else-fi */ |
| |
| #ifndef CONFIG_NSH_DISABLESCRIPT |
| if (nsh_ifthenelse(vtbl, &cmd, &saveptr) != 0) |
| { |
| goto errout; |
| } |
| #endif |
| |
| /* Handle nice */ |
| |
| #ifndef CONFIG_NSH_DISABLEBG |
| if (nsh_nice(vtbl, &cmd, &saveptr) != 0) |
| { |
| goto errout; |
| } |
| #endif |
| |
| /* Check if any command was provided -OR- if command processing is |
| * currently disabled. |
| */ |
| |
| #ifndef CONFIG_NSH_DISABLESCRIPT |
| if (!cmd || !nsh_cmdenabled(vtbl)) |
| #else |
| if (!cmd) |
| #endif |
| { |
| /* An empty line is not an error and an unprocessed command cannot |
| * generate an error, but neither should they change the last |
| * command status. |
| */ |
| |
| return OK; |
| } |
| |
| /* Parse all of the arguments following the command name. The form |
| * of argv is: |
| * |
| * argv[0]: The command name. |
| * argv[1]: The beginning of argument (up to CONFIG_NSH_MAXARGUMENTS) |
| * argv[argc-3]: Possibly '>' or '>>' |
| * argv[argc-2]: Possibly <file> |
| * argv[argc-1]: Possibly '&' |
| * argv[argc]: NULL terminating pointer |
| * |
| * Maximum size is CONFIG_NSH_MAXARGUMENTS+5 |
| */ |
| |
| argv[0] = cmd; |
| for (argc = 1; argc < MAX_ARGV_ENTRIES-1; argc++) |
| { |
| argv[argc] = nsh_argument(vtbl, &saveptr); |
| if (!argv[argc]) |
| { |
| break; |
| } |
| } |
| |
| argv[argc] = NULL; |
| |
| /* Check if the command should run in background */ |
| |
| #ifndef CONFIG_NSH_DISABLEBG |
| if (argc > 1 && strcmp(argv[argc-1], "&") == 0) |
| { |
| vtbl->np.np_bg = true; |
| argv[argc-1] = NULL; |
| argc--; |
| } |
| #endif |
| |
| #if CONFIG_NFILE_STREAMS > 0 |
| /* Check if the output was re-directed using > or >> */ |
| |
| if (argc > 2) |
| { |
| /* Check for redirection to a new file */ |
| |
| if (strcmp(argv[argc-2], g_redirect1) == 0) |
| { |
| vtbl->np.np_redirect = true; |
| oflags = O_WRONLY|O_CREAT|O_TRUNC; |
| redirfile = nsh_getfullpath(vtbl, argv[argc-1]); |
| argc -= 2; |
| } |
| |
| /* Check for redirection by appending to an existing file */ |
| |
| else if (strcmp(argv[argc-2], g_redirect2) == 0) |
| { |
| vtbl->np.np_redirect = true; |
| oflags = O_WRONLY|O_CREAT|O_APPEND; |
| redirfile = nsh_getfullpath(vtbl, argv[argc-1]); |
| argc -= 2; |
| } |
| } |
| #endif |
| |
| /* Check if the maximum number of arguments was exceeded */ |
| |
| if (argc > CONFIG_NSH_MAXARGUMENTS) |
| { |
| nsh_output(vtbl, g_fmttoomanyargs, cmd); |
| } |
| |
| /* Does this command correspond to an application filename? |
| * nsh_fileapp() returns: |
| * |
| * -1 (ERROR) if the application task corresponding to 'argv[0]' could not |
| * be started (possibly because it doesn not exist). |
| * 0 (OK) if the application task corresponding to 'argv[0]' was |
| * and successfully started. If CONFIG_SCHED_WAITPID is |
| * defined, this return value also indicates that the |
| * application returned successful status (EXIT_SUCCESS) |
| * 1 If CONFIG_SCHED_WAITPID is defined, then this return value |
| * indicates that the application task was spawned successfully |
| * but returned failure exit status. |
| * |
| * Note the priority if not effected by nice-ness. |
| */ |
| |
| #ifdef CONFIG_NSH_FILE_APPS |
| ret = nsh_fileapp(vtbl, argv[0], argv, redirfile, oflags); |
| if (ret >= 0) |
| { |
| /* nsh_fileapp() returned 0 or 1. This means that the builtin |
| * command was successfully started (although it may not have ran |
| * successfully). So certainly it is not an NSH command. |
| */ |
| |
| /* Free the redirected output file path */ |
| |
| if (redirfile) |
| { |
| nsh_freefullpath(redirfile); |
| } |
| |
| /* Save the result: success if 0; failure if 1 */ |
| |
| return nsh_saveresult(vtbl, ret != OK); |
| } |
| |
| /* No, not a built in command (or, at least, we were unable to start a |
| * builtin command of that name). Treat it like an NSH command. |
| */ |
| |
| #endif |
| |
| /* Does this command correspond to a builtin command? |
| * nsh_builtin() returns: |
| * |
| * -1 (ERROR) if the application task corresponding to 'argv[0]' could not |
| * be started (possibly because it doesn not exist). |
| * 0 (OK) if the application task corresponding to 'argv[0]' was |
| * and successfully started. If CONFIG_SCHED_WAITPID is |
| * defined, this return value also indicates that the |
| * application returned successful status (EXIT_SUCCESS) |
| * 1 If CONFIG_SCHED_WAITPID is defined, then this return value |
| * indicates that the application task was spawned successfully |
| * but returned failure exit status. |
| * |
| * Note the priority if not effected by nice-ness. |
| */ |
| |
| #if defined(CONFIG_NSH_BUILTIN_APPS) && (!defined(CONFIG_NSH_FILE_APPS) || !defined(CONFIG_FS_BINFS)) |
| #if CONFIG_NFILE_STREAMS > 0 |
| ret = nsh_builtin(vtbl, argv[0], argv, redirfile, oflags); |
| #else |
| ret = nsh_builtin(vtbl, argv[0], argv, NULL, 0); |
| #endif |
| if (ret >= 0) |
| { |
| /* nsh_builtin() returned 0 or 1. This means that the builtin |
| * command was successfully started (although it may not have ran |
| * successfully). So certainly it is not an NSH command. |
| */ |
| |
| #if CONFIG_NFILE_STREAMS > 0 |
| /* Free the redirected output file path */ |
| |
| if (redirfile) |
| { |
| nsh_freefullpath(redirfile); |
| } |
| #endif |
| |
| /* Save the result: success if 0; failure if 1 */ |
| |
| return nsh_saveresult(vtbl, ret != OK); |
| } |
| |
| /* No, not a built in command (or, at least, we were unable to start a |
| * builtin command of that name). Treat it like an NSH command. |
| */ |
| |
| #endif |
| |
| #if CONFIG_NFILE_STREAMS > 0 |
| /* Redirected output? */ |
| |
| if (vtbl->np.np_redirect) |
| { |
| /* Open the redirection file. This file will eventually |
| * be closed by a call to either nsh_release (if the command |
| * is executed in the background) or by nsh_undirect if the |
| * command is executed in the foreground. |
| */ |
| |
| fd = open(redirfile, oflags, 0666); |
| nsh_freefullpath(redirfile); |
| redirfile = NULL; |
| |
| if (fd < 0) |
| { |
| nsh_output(vtbl, g_fmtcmdfailed, cmd, "open", NSH_ERRNO); |
| goto errout; |
| } |
| } |
| #endif |
| |
| /* Handle the case where the command is executed in background. |
| * However is app is to be started as builtin new process will |
| * be created anyway, so skip this step. |
| */ |
| |
| #ifndef CONFIG_NSH_DISABLEBG |
| if (vtbl->np.np_bg) |
| { |
| struct sched_param param; |
| struct nsh_vtbl_s *bkgvtbl; |
| struct cmdarg_s *args; |
| pthread_attr_t attr; |
| pthread_t thread; |
| |
| /* Get a cloned copy of the vtbl with reference count=1. |
| * after the command has been processed, the nsh_release() call |
| * at the end of nsh_child() will destroy the clone. |
| */ |
| |
| bkgvtbl = nsh_clone(vtbl); |
| if (!bkgvtbl) |
| { |
| goto errout_with_redirect; |
| } |
| |
| /* Create a container for the command arguments */ |
| |
| args = nsh_cloneargs(bkgvtbl, fd, argc, argv); |
| if (!args) |
| { |
| nsh_release(bkgvtbl); |
| goto errout_with_redirect; |
| } |
| |
| #if CONFIG_NFILE_STREAMS > 0 |
| /* Handle redirection of output via a file descriptor */ |
| |
| if (vtbl->np.np_redirect) |
| { |
| (void)nsh_redirect(bkgvtbl, fd, NULL); |
| } |
| #endif |
| |
| /* Get the execution priority of this task */ |
| |
| ret = sched_getparam(0, ¶m); |
| if (ret != 0) |
| { |
| nsh_output(vtbl, g_fmtcmdfailed, cmd, "sched_getparm", NSH_ERRNO); |
| nsh_releaseargs(args); |
| nsh_release(bkgvtbl); |
| goto errout; |
| } |
| |
| /* Determine the priority to execute the command */ |
| |
| if (vtbl->np.np_nice != 0) |
| { |
| int priority = param.sched_priority - vtbl->np.np_nice; |
| if (vtbl->np.np_nice < 0) |
| { |
| int max_priority = sched_get_priority_max(SCHED_NSH); |
| if (priority > max_priority) |
| { |
| priority = max_priority; |
| } |
| } |
| else |
| { |
| int min_priority = sched_get_priority_min(SCHED_NSH); |
| if (priority < min_priority) |
| { |
| priority = min_priority; |
| } |
| } |
| |
| param.sched_priority = priority; |
| } |
| |
| /* Set up the thread attributes */ |
| |
| (void)pthread_attr_init(&attr); |
| (void)pthread_attr_setschedpolicy(&attr, SCHED_NSH); |
| (void)pthread_attr_setschedparam(&attr, ¶m); |
| |
| /* Execute the command as a separate thread at the appropriate priority */ |
| |
| ret = pthread_create(&thread, &attr, nsh_child, (pthread_addr_t)args); |
| if (ret != 0) |
| { |
| nsh_output(vtbl, g_fmtcmdfailed, cmd, "pthread_create", NSH_ERRNO_OF(ret)); |
| nsh_releaseargs(args); |
| nsh_release(bkgvtbl); |
| goto errout; |
| } |
| |
| /* Detach from the pthread since we are not going to join with it. |
| * Otherwise, we would have a memory leak. |
| */ |
| |
| (void)pthread_detach(thread); |
| |
| nsh_output(vtbl, "%s [%d:%d]\n", cmd, thread, param.sched_priority); |
| } |
| else |
| #endif |
| { |
| #if CONFIG_NFILE_STREAMS > 0 |
| uint8_t save[SAVE_SIZE]; |
| |
| /* Handle redirection of output via a file descriptor */ |
| |
| if (vtbl->np.np_redirect) |
| { |
| nsh_redirect(vtbl, fd, save); |
| } |
| #endif |
| |
| /* Then execute the command in "foreground" -- i.e., while the user waits |
| * for the next prompt. nsh_execute will return: |
| * |
| * -1 (ERRROR) if the command was unsuccessful |
| * 0 (OK) if the command was successful |
| */ |
| |
| ret = nsh_execute(vtbl, argc, argv); |
| |
| #if CONFIG_NFILE_STREAMS > 0 |
| /* Restore the original output. Undirect will close the redirection |
| * file descriptor. |
| */ |
| |
| if (vtbl->np.np_redirect) |
| { |
| nsh_undirect(vtbl, save); |
| } |
| #endif |
| |
| /* Mark errors so that it is possible to test for non-zero return values |
| * in nsh scripts. |
| */ |
| |
| if (ret < 0) |
| { |
| goto errout; |
| } |
| } |
| |
| /* Return success if the command succeeded (or at least, starting of the |
| * command task succeeded). |
| */ |
| |
| return nsh_saveresult(vtbl, false); |
| |
| #ifndef CONFIG_NSH_DISABLEBG |
| errout_with_redirect: |
| #if CONFIG_NFILE_STREAMS > 0 |
| if (vtbl->np.np_redirect) |
| { |
| close(fd); |
| } |
| #endif |
| #endif |
| |
| errout: |
| return nsh_saveresult(vtbl, true); |
| } |
