| /**************************************************************************** |
| * netutils/thttpd/config.h |
| * |
| * Copyright (C) 2009 Gregory Nutt. All rights reserved. |
| * Author: Gregory Nutt <gnutt@nuttx.org> |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * 3. Neither the name NuttX nor the names of its contributors may be |
| * used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
| * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
| * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
| * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED |
| * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN |
| * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| * |
| ****************************************************************************/ |
| |
| #ifndef __NETUTILS_THTTPD_CONFIG_H |
| #define __NETUTILS_THTTPD_CONFIG_H |
| |
| /**************************************************************************** |
| * Included files |
| ****************************************************************************/ |
| |
| #include <nuttx/config.h> |
| #include <nuttx/compiler.h> |
| #include <stdint.h> |
| |
| /**************************************************************************** |
| * Pre-processor Definitions |
| ****************************************************************************/ |
| |
| /* Make sure that the system is configured to handle THTTPD */ |
| |
| #undef CONFIG_THTTPD |
| #if defined(CONFIG_NET) && defined(CONFIG_NET_TCP) && \ |
| defined(CONFIG_NET_TCPBACKLOG) && !defined(CONFIG_DISABLE_ENVIRON) && \ |
| !defined(CONFIG_SDCLONE_DISABLE) && defined(CONFIG_NET_TCP_READAHEAD) |
| |
| # define CONFIG_THTTPD 1 |
| |
| /* Check all THTTPD configuration settings. Complain on any that should have |
| * been defined but were not. Supply some kind of reasonable value for all |
| * undefined settings. |
| */ |
| |
| /* Server port number */ |
| |
| # ifndef CONFIG_THTTPD_PORT |
| # define CONFIG_THTTPD_PORT 80 |
| # endif |
| |
| /* Server IP address (no host name) */ |
| |
| # ifndef CONFIG_THTTPD_IPADDR |
| # ifdef CONFIG_CPP_HAVE_WARNING |
| # warning "CONFIG_THTTPD_IPADDR not defined" |
| # endif |
| # define CONFIG_THTTPD_IPADDR (10<<24|0<<16|0<<8|2) |
| # endif |
| |
| /* SERVER_ADDRESS: response */ |
| |
| # ifndef CONFIG_THTTPD_SERVER_ADDRESS |
| # define CONFIG_THTTPD_SERVER_ADDRESS "http://www.nuttx.org" |
| # endif |
| |
| /* SERVER_SOFTWARE: response */ |
| |
| # ifndef CONFIG_THTTPD_SERVER_SOFTWARE |
| # define CONFIG_THTTPD_SERVER_SOFTWARE "thttpd/2.25b 29dec2003-NuttX" |
| # endif |
| |
| # ifndef CONFIG_THTTPD_PATH |
| # ifdef CONFIG_CPP_HAVE_WARNING |
| # warning "CONFIG_THTTPD_PATH not defined" |
| # endif |
| # define CONFIG_THTTPD_PATH "/mnt/www" |
| # endif |
| |
| # ifndef CONFIG_THTTPD_CGI_PATH |
| # ifdef CONFIG_CPP_HAVE_WARNING |
| # warning "CONFIG_THTTPD_CGI_PATH not defined" |
| # endif |
| # define CONFIG_THTTPD_CGI_PATH "/mnt/www/cgi-bin" |
| # endif |
| |
| /* Only CGI programs whose fully expanded pathes match this pattern will be executed. In fact, |
| * if this value is not defined then no CGI logic will be built. |
| */ |
| |
| # ifndef CONFIG_THTTPD_CGI_PATTERN |
| # define CONFIG_THTTPD_CGI_PATTERN "/mnt/www/cgi-bin/*" |
| # endif |
| |
| /* These provide the priority and stack size of the CGI child tasks */ |
| |
| # ifndef CONFIG_THTTPD_CGI_PRIORITY |
| # define CONFIG_THTTPD_CGI_PRIORITY 50 |
| # endif |
| |
| # ifndef CONFIG_THTTPD_CGI_STACKSIZE |
| # define CONFIG_THTTPD_CGI_STACKSIZE 2048 |
| # endif |
| |
| /* Byte output limit for CGI tasks */ |
| |
| # ifndef CONFIG_THTTPD_CGI_BYTECOUNT |
| # define CONFIG_THTTPD_CGI_BYTECOUNT 200000 |
| # endif |
| |
| /* How many seconds to allow CGI programs to run before killing them. */ |
| |
| # ifndef CONFIG_THTTPD_CGI_TIMELIMIT |
| # define CONFIG_THTTPD_CGI_TIMELIMIT 0 /* No time limit */ |
| # endif |
| |
| /* The default character set name to use with text MIME types. */ |
| |
| # ifndef CONFIG_THTTPD_CHARSET |
| # define CONFIG_THTTPD_CHARSET "iso-8859-1" |
| # endif |
| |
| /* Initial buffer size, buffer reallocation increment, maximum buffer size */ |
| |
| # ifndef CONFIG_THTTPD_IOBUFFERSIZE |
| # define CONFIG_THTTPD_IOBUFFERSIZE 256 |
| # endif |
| |
| # ifndef CONFIG_THTTPD_MINSTRSIZE |
| # define CONFIG_THTTPD_MINSTRSIZE 64 |
| # endif |
| |
| # ifndef CONFIG_THTTPD_REALLOCINCR |
| # define CONFIG_THTTPD_REALLOCINCR 64 |
| # endif |
| |
| # ifndef CONFIG_THTTPD_MAXREALLOC |
| # define CONFIG_THTTPD_MAXREALLOC 4096 |
| # endif |
| |
| # ifndef CONFIG_THTTPD_CGIINBUFFERSIZE |
| # define CONFIG_THTTPD_CGIINBUFFERSIZE 512 /* Size of buffer to interpose input */ |
| # endif |
| |
| # ifndef CONFIG_THTTPD_CGIOUTBUFFERSIZE |
| # define CONFIG_THTTPD_CGIOUTBUFFERSIZE 512 /* Size of buffer to interpose output */ |
| # endif |
| |
| # if CONFIG_THTTPD_IOBUFFERSIZE > 65535 |
| # error "Can't use uint16_t for buffer size" |
| # endif |
| |
| /* A list of index filenames to check. The files are searched for in this order. */ |
| |
| # ifndef CONFIG_THTTPD_INDEX_NAMES |
| # define CONFIG_THTTPD_INDEX_NAMES "index.html", "index.htm", "index.cgi" |
| # endif |
| |
| /* CONFIG_AUTH_FILE - The file to use for authentication. If this is defined then |
| * thttpd checks for this file in the local directory before every fetch. If the |
| * file exists then authentication is done, otherwise the fetch proceeds as usual. |
| * If you leave this undefined then thttpd will not implement authentication at |
| * all and will not check for auth files, which saves a bit of CPU time. |
| * A typical value is ".htpasswd" |
| */ |
| |
| /* The listen() backlog queue length. */ |
| |
| # ifndef CONFIG_THTTPD_LISTEN_BACKLOG |
| # define CONFIG_THTTPD_LISTEN_BACKLOG 8 |
| # endif |
| |
| /* How many milliseconds to leave a connection open while doing a lingering close */ |
| |
| # ifndef CONFIG_THTTPD_LINGER_MSEC |
| # define CONFIG_THTTPD_LINGER_MSEC 500 |
| # endif |
| |
| /* How often to run the occasional cleanup job.*/ |
| |
| # ifndef CONFIG_THTTPD_OCCASIONAL_MSEC |
| # define CONFIG_THTTPD_OCCASIONAL_MSEC 120 /* Two minutes */ |
| # endif |
| |
| /* How many seconds to allow for reading the initial request on a new connection. */ |
| |
| # ifndef CONFIG_THTTPD_IDLE_READ_LIMIT_SEC |
| # define CONFIG_THTTPD_IDLE_READ_LIMIT_SEC 300 |
| # endif |
| |
| /* How many seconds before an idle connection gets closed. */ |
| |
| # ifndef CONFIG_THTTPD_IDLE_SEND_LIMIT_SEC |
| # define CONFIG_THTTPD_IDLE_SEND_LIMIT_SEC 300 |
| # endif |
| |
| /* Memory debug instrumentation depends on other debug options */ |
| |
| # if (!defined(CONFIG_DEBUG_FEATURES) || !defined(CONFIG_DEBUG_NET)) && defined(CONFIG_THTTPD_MEMDEBUG) |
| # undef CONFIG_THTTPD_MEMDEBUG |
| # endif |
| |
| /* Tilde mapping. Many URLs use ~username to indicate a user's home directory. thttpd |
| * provides two options for mapping this construct to an actual filename. |
| * |
| * 1) Map ~username to <prefix>/username. This is the recommended choice. Each user |
| * gets a subdirectory in the main web tree, and the tilde construct points there. |
| * The prefix could be something like "users", or it could be empty. |
| * 2) Map ~username to <user's homedir>/<postfix>. The postfix would be the name of |
| * a subdirectory off of the user's actual home dir, something like "public_html". |
| * |
| * You can also leave both options undefined, and thttpd will not do anything special |
| * about tildes. Enabling both options is an error. |
| * |
| * Typical values, if they're defined, are "users" for CONFIG_THTTPD_TILDE_MAP1 and "public_html" |
| * for CONFIG_THTTPD_TILDE_MAP2. |
| */ |
| |
| # if defined(CONFIG_THTTPD_TILDE_MAP1) && defined(CONFIG_THTTPD_TILDE_MAP2) |
| # error "Both CONFIG_THTTPD_TILDE_MAP1 and CONFIG_THTTPD_TILDE_MAP2 are defined" |
| # endif |
| |
| /* If CONFIG_THTTPD_URLPATTERN is defined, then it will be used to match and verify |
| * referrers. |
| */ |
| |
| #else /* Dependencies not provided */ |
| # ifdef CONFIG_CPP_HAVE_WARNING |
| # warning "THTTPD not built because dependencies not selected in configuration" |
| # endif |
| #endif /* Dependencies not provided */ |
| |
| #endif /* __NETUTILS_THTTPD_CONFIG_H */ |
| |